Skip to content

armgit / moss

Public Imported from GitHub
0

MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.

Python

docs/litter: run the probe with the robot's venv python

metrox0ddbe9b2ecee
diff --git a/docs/litter.md b/docs/litter.md
index b130265..3b9ad3a 100644
--- a/docs/litter.md
+++ b/docs/litter.md
@@ -60,9 +60,9 @@ and, with `--expect X Y`, how far the median is from where the tape measure
put the object.
```sh
-tools/moss-fly.sh stop # the camera must be free
-tools/moss_litter_probe.py --seconds 10 --expect 1.00 0.00 # a can 1.00 m ahead of the lidar axis, on it
-tools/moss_litter_probe.py --fake --frames 20 # no camera, no torch: the chain on a synthetic frame
+tools/moss-fly.sh stop # the camera must be free; the robot's venv has torch and ultralytics, the system python does not
+.venv/bin/python tools/moss_litter_probe.py --seconds 10 --expect 1.00 0.00 # a can 1.00 m ahead of base_link's origin, on its x axis
+.venv/bin/python tools/moss_litter_probe.py --fake --frames 20 # no camera, no torch: the chain on a synthetic frame
```
Three or four pieces of litter at measured places, ten seconds each, give the