Skip to content

armgit / moss

Public Imported from GitHub
0

MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.

Python

dimOS: manipulation too

metrox1343e081049e
diff --git a/README.md b/README.md
index eed7efa..30313a4 100644
--- a/README.md
+++ b/README.md
@@ -35,7 +35,7 @@ The Jetson configuration is the one on the bench. Every line is in the [BOM](BOM
- An SO-101 arm (open source) with a NormaCore parallel-jaw gripper, widened to a 90 mm grip.
- Two cameras: a depth camera at the nose, a colour camera in the hand.
- A 2D lidar for navigation.
-- Software: dimOS for teleop, recording and navigation.
+- Software: dimOS for teleop, recording, navigation and manipulation.
I pick up litter by hand on my walks. MOSS is the robot I want next to me doing the same. One less can on the ground.
diff --git a/Software.md b/Software.md
index 765d428..1632181 100644
--- a/Software.md
+++ b/Software.md
@@ -1,6 +1,6 @@
# Software
-The stack is dimOS. The microcontroller drives the motors; dimOS, on the Jetson or the Pi, does teleop, recording and navigation. The policies come later, from pooled data.
+The stack is dimOS. The microcontroller drives the motors; dimOS, on the Jetson or the Pi, does teleop, recording, navigation and manipulation. The policies come later, from pooled data.
**The motor firmware drove the prototype. The computer side is tested against a fake serial port only.**