Skip to content

armgit / moss

Public Imported from GitHub
0

MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.

Python

build log 2026-09-18: chassis printed, first fit on the bench, drivetrain and tensioners printing; BOM and status updated; video + frames

metrox1b4074d0d0da
diff --git a/README.md b/README.md
index 83550c1..15a331d 100644
--- a/README.md
+++ b/README.md
@@ -10,14 +10,16 @@ This repository is the build log, the design files as they become real, and the
![First parts](media/images/build_02_first_parts_20260917.jpg)
-## Status (17 September 2026)
+## Status (18 September 2026)
-- Printed: two flexible tracks (TPU 95A), the collection bin and its top cover (PLA).
-- Printing: the main chassis (PETG), inner side rails, cross spacers, motor brackets.
-- On the bench: Jetson Orin Nano 8 GB, Intel RealSense depth camera, Waveshare controller board, 2 × Cytron MD10C R3 motor drivers, 2 × geared motors with encoders, fuse holder, converter, interface modules.
+- Printed: main chassis (PETG), two flexible tracks (TPU 95A), collection bin and top cover (PLA), side rails, cross spacers, motor brackets.
+- First fit on the bench: the parts go together, with two or three small fit issues to correct in the next revision. Nothing bolted yet.
+- Printing: drive and idler wheels (eight halves), track tensioners and bearing retainers.
+- On the bench: Jetson Orin Nano 8 GB, Intel RealSense depth camera (mounted up front, access from above), Waveshare General Driver for Robots (ESP32), 2 × Cytron MD10C R3 motor drivers, 2 × geared motors with encoders, fuse holder, converter, interface modules.
- Ordered: steel shafts (5/6/8 mm), bearings (608, 626), shaft collars, 6 mm couplings, M3 and M4 fasteners.
- Software: a scaffold derived from [vector-dimos](https://github.com/metrox-eth/vector-dimos) (gamepad teleop and differential-drive kinematics, cold-tested, not yet run on the rover).
- CAD: designed in Fusion 360; STL and STEP exports will land in `hardware/` as each part is validated by a real print.
+- Next: fit the drivetrain, mount the arm, test on the ground.
![Chassis, removable modules](media/images/concept_04_chassis_v2_3_1.jpg)
diff --git a/docs/bom.md b/docs/bom.md
index a5ba967..02e578f 100644
--- a/docs/bom.md
+++ b/docs/bom.md
@@ -8,11 +8,13 @@ Target: 500 to 700 USD in parts plus a Jetson, before tax and shipping. Prices a
| Track (×2) | TPU 95A | Bambu Lab P1S | printed |
| Collection bin | PLA | Bambu Lab H2S | printed |
| Top cover | PLA | H2S | printed |
-| Main chassis | PETG | H2S | printing |
-| Inner side rails (×2) | PETG | P1S | printing |
-| Cross spacers (×4) | PETG | P1S | printing |
-| Outer side rail | PETG | P1S | next plate |
-| Motor brackets (×2) | PETG | P1S | next plate |
+| Main chassis | PETG (black) | H2S | printed |
+| Inner side rails (×2) | PETG | P1S | printed |
+| Cross spacers (×4) | PETG | P1S | printed |
+| Outer side rail | PETG | P1S | printed |
+| Motor brackets (×2) | PETG | P1S | printed |
+| Drive and idler wheels (8 halves) | PETG | P1S | printing |
+| Track tensioners + bearing retainers (12 parts) | PETG | P1S | printing |
## Electronics
- Jetson Orin Nano 8 GB (brain)
diff --git a/docs/build_log.md b/docs/build_log.md
index 7f580b8..7dae4ce 100644
--- a/docs/build_log.md
+++ b/docs/build_log.md
@@ -15,3 +15,19 @@ Two tracks, the bin and its top cover are done. The main chassis is printing in
![Structure](../media/images/build_04_structure_20260917.jpg)
Video: `media/video/MOSS_build_update_20260917.mp4`.
+
+## 2026-09-18
+The main chassis came off the H2S in black PETG. First fit check on the bench: chassis, top cover, collection bin, the two flexible tracks, side rails and brackets. The RealSense sits up front, with access from above. Nothing is bolted yet; the parts go together with two or three small fit issues to correct in the next revision.
+
+![The chassis is real](../media/images/build_02_chassis_real_20260918.jpg)
+![From print to first fit](../media/images/build_03_first_fit_parts_20260918.jpg)
+![Taking shape](../media/images/build_04_taking_shape_20260918.jpg)
+
+Printing now on the P1S: the drivetrain, eight wheel halves (drive and idler wheels, 0.4 mm nozzle, black PETG), then twelve parts of track tensioners and bearing retainers.
+
+![Drivetrain plate](../media/images/build_05_drivetrain_plate_20260918.jpg)
+![Tensioners and retainers](../media/images/build_06_tensioners_plate_20260918.jpg)
+
+Next: fit the drivetrain, mount the arm, test on the ground.
+
+Video: `media/video/MOSS_build_log_02_20260918.mp4`.
diff --git a/media/images/build_02_chassis_real_20260918.jpg b/media/images/build_02_chassis_real_20260918.jpg
new file mode 100644
index 0000000..617278d
Binary files /dev/null and b/media/images/build_02_chassis_real_20260918.jpg differ
diff --git a/media/images/build_03_first_fit_parts_20260918.jpg b/media/images/build_03_first_fit_parts_20260918.jpg
new file mode 100644
index 0000000..f679f17
Binary files /dev/null and b/media/images/build_03_first_fit_parts_20260918.jpg differ
diff --git a/media/images/build_04_taking_shape_20260918.jpg b/media/images/build_04_taking_shape_20260918.jpg
new file mode 100644
index 0000000..b7b84b5
Binary files /dev/null and b/media/images/build_04_taking_shape_20260918.jpg differ
diff --git a/media/images/build_05_drivetrain_plate_20260918.jpg b/media/images/build_05_drivetrain_plate_20260918.jpg
new file mode 100644
index 0000000..4461318
Binary files /dev/null and b/media/images/build_05_drivetrain_plate_20260918.jpg differ
diff --git a/media/images/build_06_tensioners_plate_20260918.jpg b/media/images/build_06_tensioners_plate_20260918.jpg
new file mode 100644
index 0000000..919db8d
Binary files /dev/null and b/media/images/build_06_tensioners_plate_20260918.jpg differ
diff --git a/media/video/MOSS_build_log_02_20260918.mp4 b/media/video/MOSS_build_log_02_20260918.mp4
new file mode 100644
index 0000000..b69a564
Binary files /dev/null and b/media/video/MOSS_build_log_02_20260918.mp4 differ