MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.
Python
Remove the lessons page
metrox21df4e65c9bf
diff --git a/Assembly.md b/Assembly.mdindex dc60813..63084bc 100644--- a/Assembly.md+++ b/Assembly.md@@ -1,6 +1,6 @@# Assembly-Photos from the first prototype. The step-by-step with the final parts comes with the files. Read [docs/lessons.md](docs/lessons.md) first; it is short.+Photos from the first prototype. The step-by-step with the final parts comes with the files.## 1. Lay out the print setdiff --git a/README.md b/README.mdindex 2515a97..eed7efa 100644--- a/README.md+++ b/README.md@@ -56,7 +56,7 @@ The MOSS body runs in MuJoCo with three recorded pickup missions, in the [moss-j## Come and build-Ask anything, tell us what we are doing wrong, it helps the next builder: [Discord](https://discord.com/invite/x2MeNmgveT). The build, as it happens: [@metrox_eth](https://x.com/metrox_eth). The story so far, in a few moments: [STORY.md](STORY.md). What we learned the hard way: [docs/lessons.md](docs/lessons.md). How data from many rovers gets pooled: [docs/data.md](docs/data.md).+Ask anything, tell us what we are doing wrong, it helps the next builder: [Discord](https://discord.com/invite/x2MeNmgveT). The build, as it happens: [@metrox_eth](https://x.com/metrox_eth). The story so far, in a few moments: [STORY.md](STORY.md). How data from many rovers gets pooled: [docs/data.md](docs/data.md).## Safetydiff --git a/docs/lessons.md b/docs/lessons.mddeleted file mode 100644index fdcd877..0000000--- a/docs/lessons.md+++ /dev/null@@ -1,10 +0,0 @@-# What we learned the hard way--One line each. What it changes for you.--1. **The INA219 reads battery voltage, not motor current.** The shunt is not in the motor line. Do not read its current field as if it were.-2. **The controller sits on a screw-terminal board.** Jumper wires make false contacts once the rover moves. Keep it that way.-3. **The RealSense needs the right-angle USB cable.** The straight plug does not clear the hull. It is a line in the BOM.-4. **Keep the arm plate where the CAD puts it.** The arm was moved to make room for the lidar and clear the bin; folded, the elbow already touches the bin.-5. **Weigh the real robot before trusting the model.** The prototype came in at 3.5 kg without the arm; the first simulator export said 6.14 kg. A number copied often enough starts to look like a measurement.-6. **Put the rover on blocks for the first run.** Every time the firmware or the wiring changes.