MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.
Python
build log: harness and first-assembly photos inline
metrox26d99aca7e67
diff --git a/docs/build_log.md b/docs/build_log.mdindex 78fbe3e..d2213f9 100644--- a/docs/build_log.md+++ b/docs/build_log.md@@ -48,6 +48,8 @@ Next: replace the stiff track, assemble and check the drivetrain, fit the arm an## 2026-09-20 — power and control harness, first motor and encoder tests++The print set is complete, camera brackets and corrected motor brackets included, and the mechanical hardware (shafts, bearings, collars, couplings, fasteners) is in. The power and control harness is assembled. Both drive motors and their quadrature encoders were tested on the bench from an Espressif ESP32-S3-DevKitC-1 V1.1 driving two Cytron MD10C R3. Video: [MOSS_motor_encoder_bench_20260920.mp4](../media/video/MOSS_motor_encoder_bench_20260920.mp4); photo: [the harness on the bench](../media/images/build_harness_bench_20260920.jpg).The selected architecture now uses the ESP32-S3 as motor controller and a separate Waveshare Bus Servo Adapter (A) V1.1 for the SO-101 arm servos. The Waveshare General Driver for Robots is no longer part of the design. The arm was not tested in this session. The ESP32 was powered over USB-UART during the tests; the motors from the pack through the fuse and the positive distribution block, with common grounds.@@ -78,6 +80,8 @@ Next: integrate the harness into the chassis, set installed motor and encoder di## 2026-09-20 (evening) — electronics in the chassis, Jetson on battery++First assembly of the electronics inside the printed chassis: motors, drivers, ESP32-S3, the pack in its bay, and the Jetson, which now boots from battery power. Video: [MOSS_first_assembly_20260920.mp4](../media/video/MOSS_first_assembly_20260920.mp4); still: [electronics in the chassis](../media/images/build_first_assembly_20260920.jpg).First reality checks: some components ended up elsewhere than planned in CAD. The differences go into [assembly_feedback.md](assembly_feedback.md) as they are measured, and into the next hardware revision. No drive test yet.