Skip to content

armgit / moss

Public Imported from GitHub
0

MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.

Python

BOM: two outer side rails, splash-proof vent covers (designed)

metrox312f91d4d0e3
diff --git a/README.md b/README.md
index 6a2b112..807c762 100644
--- a/README.md
+++ b/README.md
@@ -12,7 +12,7 @@ This repository is the build log, the design files as they become real, and the
## Status (18 September 2026)
-- Printed: main chassis (PETG), two flexible tracks (TPU 95A), collection bin and top cover (PLA), side rails, cross spacers, motor brackets.
+- Printed: main chassis (PETG), two flexible tracks (TPU 95A), collection bin and top cover (PLA), inner and outer side rails (two of each), cross spacers, motor brackets.
- First fit on the bench: the parts go together, with two or three small fit issues to correct in the next revision. Nothing bolted yet.
- Printing: drive and idler wheels (eight halves), track tensioners and bearing retainers.
- On the bench: Jetson Orin Nano 8 GB, Intel RealSense depth camera (mounted up front, access from above), Waveshare General Driver for Robots (ESP32), 2 × Cytron MD10C R3 motor drivers, 2 × geared motors with encoders, fuse holder, converter, interface modules.
diff --git a/docs/bom.md b/docs/bom.md
index 02e578f..0e0fff5 100644
--- a/docs/bom.md
+++ b/docs/bom.md
@@ -11,10 +11,11 @@ Target: 500 to 700 USD in parts plus a Jetson, before tax and shipping. Prices a
| Main chassis | PETG (black) | H2S | printed |
| Inner side rails (×2) | PETG | P1S | printed |
| Cross spacers (×4) | PETG | P1S | printed |
-| Outer side rail | PETG | P1S | printed |
+| Outer side rails (×2) | PETG | P1S | printed |
| Motor brackets (×2) | PETG | P1S | printed |
| Drive and idler wheels (8 halves) | PETG | P1S | printing |
| Track tensioners + bearing retainers (12 parts) | PETG | P1S | printing |
+| Splash-proof vent covers (×2) | PETG | — | designed |
## Electronics
- Jetson Orin Nano 8 GB (brain)