MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.
Python
BOM: third configuration, Pi 5 + Mighty camera, no accelerator; wrist camera priced in every configuration
metrox6446cb114481
diff --git a/BOM.md b/BOM.mdindex 2b2acf6..909330c 100644--- a/BOM.md+++ b/BOM.md@@ -4,16 +4,17 @@## Totals-| | Kit base | Jetson + RealSense | Pi + Hailo + Gemini |-|---|---:|---:|---:|-| Kit base (everything below) | 482 | 482 | 482 |-| Computer | | 495 | 218 |-| AI accelerator | | on board | 232 |-| Depth camera | | 466 | 234 |-| 2D lidar | | 72 | 72 |-| **Total** | **about $480** | **about $1,520** | **about $1,240** |--The Jetson configuration is the prototype. The Pi configuration is drawn, not yet run.+| | Kit base | Jetson + RealSense | Pi + Hailo + Gemini | Pi + Mighty |+|---|---:|---:|---:|---:|+| Kit base (everything below) | 482 | 482 | 482 | 482 |+| Computer | | 495 | 218 | 218 |+| AI accelerator | | on board | 232 | none |+| Camera at the nose | | 466 | 234 | 92 |+| Wrist camera | | 25 | 25 | 25 |+| 2D lidar | | 72 | 72 | 72 |+| **Total** | **about $480** | **about $1,540** | **about $1,260** | **about $890** |++The Jetson configuration is the prototype. The two Pi configurations are drawn, not yet run.## Computer and perception@@ -25,6 +26,8 @@ The Jetson configuration is the prototype. The Pi configuration is drawn, not ye| Raspberry Pi 5 8 GB | 1 | 175 | with active cooler 8, 5 V supply 20, microSD 15 || Raspberry Pi AI HAT+ 2 (Hailo-10H, 40 TOPS) | 1 | 232 | *paid*; list price about 200 || Orbbec Gemini 2 | 1 | 234 | listing. Depth from 0.15 m, 91° × 66° |+| Mighty Camera, visual-inertial tracking, onboard IMU | 1 | 92 | *paid*. Pose estimation on the camera itself, no accelerator needed |+| Wrist camera, USB colour, in the gripper | 1 | 25 | estimate; the mount is printed with the gripper || SLAMTEC RPLIDAR C1 | 1 | 72 | listing (RobotShop, DFRobot). Mount printed; position on the cover still being settled |## Kit base, about $482@@ -63,7 +66,7 @@ The Jetson configuration is the prototype. The Pi configuration is drawn, not ye| ST3215 12 V bus servo | 5 | 22 | 110 | arm joints || CF35-12 constant-force servo | 1 | 50 | 50 | gripper |-The small camera in the hand (Waveshare 38 mm USB camera in the CAD) is not priced yet.+The camera in the hand is counted with the sensors above.### Power and wiringdiff --git a/README.md b/README.mdindex 1c0dc04..f492669 100644--- a/README.md+++ b/README.md@@ -20,10 +20,11 @@ Retail estimates for one rover, parts only. A kit will be cheaper.| Configuration | Parts ||---|---:|| Kit base: chassis, tracks, arm, gripper, power, filament | about $480 |-| + Jetson Orin Nano Super, RealSense D455, 2D lidar | about $1,520 |-| + Raspberry Pi 5, Hailo AI HAT, Orbbec Gemini 2, 2D lidar | about $1,240 |+| + Jetson Orin Nano Super, RealSense D455, wrist camera, 2D lidar | about $1,540 |+| + Raspberry Pi 5, Hailo AI HAT, Orbbec Gemini 2, wrist camera, 2D lidar | about $1,260 |+| + Raspberry Pi 5, Mighty camera, wrist camera, 2D lidar | about $890 |-The Jetson configuration is the one on the bench. The Pi configuration is drawn, not yet run. Every line is in the [BOM](BOM.md).+The Jetson configuration is the one on the bench. The Pi configurations are drawn, not yet run. Every line is in the [BOM](BOM.md).@@ -32,7 +33,7 @@ The Jetson configuration is the one on the bench. The Pi configuration is drawn,- Tracked base, two geared DC motors with encoders, printed TPU tracks, an ESP32-S3 driving the motors.- A bin you empty by hand at the end of a run.- An SO-101 arm (open source) with a NormaCore parallel-jaw gripper, widened to a 90 mm grip, and a small camera in the hand.-- A depth camera at the nose, a 2D lidar for navigation.+- A depth camera or a Mighty tracking camera at the nose, a 2D lidar for navigation.- Software: dimOS for teleop and navigation, LeRobot for data and policies. A Raspberry Pi path without dimOS for the first drives.The rule we build by: pick up more litter with less technology. Every part has to earn its place against a person with a bag.