Skip to content

armgit / moss

Public Imported from GitHub
0

MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.

Python

docs: link V1D draft from hardware guide

metr0x784f361ea52d
diff --git a/hardware/README.md b/hardware/README.md
index fb9dc55..add7995 100644
--- a/hardware/README.md
+++ b/hardware/README.md
@@ -5,3 +5,9 @@ Designed in Fusion 360. The STL (one file per part) and STEP files land here at
Until then: the [parts list](../3DPrinting.md), the [BOM](../BOM.md) and the photos in `media/` are the reference.
`bench/` holds the raw traces of the bench tests, one folder per date. The 20 September INA219 trace is not a motor-current measurement.
+
+## Electronics prototypes
+
+[MOSS Core V1D](electronics/moss-core-v1d/) is the current routed design review: editable KiCad files, schematics, BOM, connector guide and static review evidence. **Draft only: not approved for fabrication or assembly.** Rover fit and hardware validation remain pending.
+
+[V1C](electronics/moss-core-v1c/) is retained for traceability and **must not be fabricated** because of a physical-pin mapping error; see the [critical erratum](electronics/moss-core-v1d/V1C_CRITICAL_ERRATA.txt).