Skip to content

armgit / moss

Public Imported from GitHub
0

MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.

Python

BOM: base assembly, not kit; totals rounded to $50

metrox8f7162b5b192
diff --git a/BOM.md b/BOM.md
index 5093d40..1f8a16a 100644
--- a/BOM.md
+++ b/BOM.md
@@ -4,15 +4,15 @@ List prices in USD, one rover. A kit will cost less.
## Totals
-| | Kit base | Jetson + RealSense | Pi + Hailo + Gemini | Pi + Mighty |
+| | Base assembly | Jetson + RealSense | Pi 5 + Hailo + Gemini | Pi 5 + Mighty |
|---|---:|---:|---:|---:|
-| Kit base (everything below) | 482 | 482 | 482 | 482 |
+| Base assembly (everything below) | 482 | 482 | 482 | 482 |
| Computer | | 414 | 207 | 207 |
| AI accelerator | | on board | 200 | none |
| Camera at the nose | | 419 | 234 | 92 |
| Wrist camera | | 19 | 19 | 19 |
| 2D lidar | | 69 | 69 | 69 |
-| **Total** | **about $480** | **about $1,400** | **about $1,210** | **about $870** |
+| **Total** | **about $500** | **about $1,400** | **about $1,200** | **about $850** |
## Computer and perception
@@ -30,7 +30,7 @@ List prices in USD, one rover. A kit will cost less.
| Wrist camera, innomaker 1080p USB module, 32 × 32 mm | 1 | 19 |
| SLAMTEC RPLIDAR C1 | 1 | 69 |
-## Kit base, about $482
+## Base assembly, about $482
| Block | USD |
|---|---:|
diff --git a/README.md b/README.md
index b641828..1663b7c 100644
--- a/README.md
+++ b/README.md
@@ -19,10 +19,10 @@ List prices for one rover, parts only. A kit will be cheaper.
| Configuration | Parts |
|---|---:|
-| Kit base: chassis, tracks, arm, gripper, power, filament | about $480 |
+| Base assembly: chassis, tracks, arm, gripper, power, filament | about $500 |
| + Jetson Orin Nano Super, RealSense D455, wrist camera, 2D lidar | about $1,400 |
-| + Raspberry Pi 5, Hailo AI HAT, Orbbec Gemini 2, wrist camera, 2D lidar | about $1,210 |
-| + Raspberry Pi 5, Mighty camera, wrist camera, 2D lidar | about $870 |
+| + Raspberry Pi 5, Hailo AI HAT, Orbbec Gemini 2, wrist camera, 2D lidar | about $1,200 |
+| + Raspberry Pi 5, Mighty camera, wrist camera, 2D lidar | about $850 |
The Jetson configuration is the one on the bench. Every line is in the [BOM](BOM.md).