Skip to content

armgit / moss

Public Imported from GitHub
0

MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.

Python

Publish MOSS V0.6 R92 build guide and mechanical release

metrox-eth97c64f92e9f9
diff --git a/3DPrinting.md b/3DPrinting.md
index 00a8073..ea98c2e 100644
--- a/3DPrinting.md
+++ b/3DPrinting.md
@@ -1,70 +1,30 @@
# 3D printing
-**107 printed parts**: 82 in PETG, 19 in PLA, 6 in TPU 95A. 18 plates, about 125 printer-hours. The STL files, one per part, come with the release in [`hardware/`](hardware/).
+Choose the hull, upper cover, computer carrier and camera option. With a one-piece hull and cover, the catalogue contains **106 pieces for RealSense or 107 for Gemini**. Each split option adds one piece, for a maximum of **109 pieces**. The download includes 113 part STL files plus two optional hull-joint fit coupons.
-![All 107 printed parts on 18 plates](media/images/moss_v05_print_plates.jpg)
-
-| Material | Where |
+| Material | Parts |
|---|---|
-| PETG | hull, hatch, drivetrain, tensioners, brackets |
-| PLA (matte) | cover, bin, arm plate, SO-101 arm, gripper |
-| TPU 95A | tracks, bin pads, gripper pads |
-
-The hull is one piece, 328 mm long: it needs a large bed. A version split for 256 mm beds follows right after the release.
-
-## Hull and body, PETG
+| PETG | Hull, motor supports, transmission, electronics carriers, camera inserts and LiDAR mounts |
+| PLA | Cover, bin, arm plate, arm and gripper body |
+| TPU95A | Tracks |
-| Part | Qty |
-|---|---:|
-| Hull, one piece | 1 |
-| Motor hatch, ten fixings | 1 |
-| Motor supports, left and right | 2 |
-| Bearing retainers, left and right | 2 |
-| Lidar mount | 1 |
-| Jetson brackets | 2 |
-| Inner side plates, left and right | 2 |
-| Outer side plates, left and right | 2 |
-| XT30 housing: base, cover, insulating separator | 3 |
-| Cross-member spacers, −40 and +40, left and right | 4 |
-| Motor bearing covers, left and right | 2 |
+Use the standard/default profile and **15% gyroid infill**. For the tracks, use **15% infill with the standard profile pattern, not gyroid**.
-## Drivetrain, PETG
+The STL files are oriented for printing. The [visual catalogue](https://www.showrobotics.ai/moss/build/#print) shows the material and quantity for every part; the [CSV](hardware/mechanical/r92/data/printed_parts.csv) gives the exact filenames.
-| Part | Qty |
-|---|---:|
-| Inner tensioner slides, left and right | 2 |
-| Inner tensioner covers, left and right | 2 |
-| Outer tensioner slides, left and right | 2 |
-| Outer tensioner covers, left and right | 2 |
-| Tensioner retainer spacers, inner and outer, left and right | 4 |
-| Tensioner spacers, inner, centre, outer, left and right | 6 |
-| Idler half-wheels, 22 teeth, inner and outer, left and right | 4 |
-| Roller half-wheels (625 bearing), positions −70, 0, +70, inner and outer, left and right | 12 |
-| Roller spacers, positions −70, 0, +70, inner, centre, outer, left and right | 18 |
-| Drive half-wheels HEX12, inner and outer, left and right | 4 |
-| Inner drive spacers, left and right | 2 |
-| Outer drive spacers HEX12, left and right | 2 |
+## Choose the camera option
-## Cover, bin and arm, PLA
+- RealSense: one RealSense support insert.
+- Gemini: one flush insert and one window bezel. The thin straight bridges have been removed; the curved ends remain.
-| Part | Qty |
-|---|---:|
-| Top cover, with lips and magnet pockets | 1 |
-| Bin, with magnet pockets | 1 |
-| Arm mounting plate | 1 |
-| SO-101: base motor holder, base, shoulder bracket, shoulder rotation, upper arm, forearm, wrist bracket, wrist | 8 |
-| Gripper (NormaCore parallel jaw, widened to 90 mm): base with extended rails, two jaws with extended racks, pinion, two flanges, cable guide, camera mount with 34 mm adapter | 8 |
+## Current set
-The SO-101 parts are the upstream files with cable clips added. The gripper is NormaCore's parallel-jaw design with the jaws and rails lengthened to open 90 mm, for bottles and cans.
+The hull is R92, the motor supports R90, the Gemini window bezel R89, and both computer carriers R87. Each filename and catalogue entry carries its own part revision. The arm plate geometry remains R22.
-## Tracks and pads, TPU 95A
+The split hull has been rebuilt from the current R92 native geometry. Choose the single hull or the two halves in the catalogue. [Split-hull assembly and files](docs/build/SPLIT_HULL.md).
-| Part | Qty |
-|---|---:|
-| Track, 70 teeth, pitch 10 mm, left and right | 2 |
-| Bin pads, front and rear | 2 |
-| Gripper pads, left and right | 2 |
+## Upper cover and outer track frames
-## Filament
+Choose the [two-piece cover](docs/build/SPLIT_COVER.md) for a smaller build volume. Its two integral dovetails assemble from above and are glued before fitting the cover.
-Plan on 2 kg of PETG, 2 kg of PLA and a roll of TPU.
+Print the outer track frames separately, flat, on the **front-right to rear-left diagonal**. Their STLs are already rotated. See the [bed placement diagram](docs/build/OUTER_FRAME_PRINTING.md).
diff --git a/Assembly.md b/Assembly.md
index 63084bc..39e279c 100644
--- a/Assembly.md
+++ b/Assembly.md
@@ -1,55 +1,5 @@
# Assembly
-Photos from the first prototype. The step-by-step with the final parts comes with the files.
+Each step lists the printed parts, components and fasteners to prepare, followed by assembly instructions and the available clip. Quantities are for one rover unless stated otherwise.
-## 1. Lay out the print set
-
-![All the pieces](media/images/moss_v05_all_the_pieces.jpg)
-
-Check every part against the [list](3DPrinting.md).
-
-## 2. Drivetrain plates
-
-![Drivetrain plate with its rollers](media/images/build_05_drivetrain_plate_20260918.jpg)
-
-![Tensioners on the plate](media/images/build_06_tensioners_plate_20260918.jpg)
-
-Rollers on their Ø5 shafts, idler wheels on Ø8, drive wheels on the HEX12 hubs, collars as the BOM counts them. Both tensioners on each side, slides and covers.
-
-## 3. Motors, encoders and the control board on the bench
-
-![Motors and encoders on the bench](media/images/build_motor_encoder_bench_20260920.jpg)
-
-Flash the [firmware](firmware/), wire one motor at a time, run `test left 10` and `test right 10` and watch the encoder counts climb in the telemetry. Do this before anything goes into the hull.
-
-## 4. Electronics into the hull
-
-![Electronics on the bench before they go in](media/images/build_electronics_bench_20260919.jpg)
-
-![The harness](media/images/build_harness_bench_20260920.jpg)
-
-We are simplifying the electrical harness. This is the first prototype; the real build will be much easier and cleaner.
-
-## 5. Tracks on
-
-![Tracks on, first drive](media/images/build_tracks_on_20260922.jpg)
-
-Fit the tracks and tension both sides, then put the rover on blocks and run `drive 10 10`. First drive on the floor only after that.
-
-## 6. Bin and cover
-
-![MOSS with its bin on](media/images/build_bin_on_20260922.jpg)
-
-Magnets in the cover and in the bin, pads under the bin.
-
-## 7. Arm and gripper
-
-![Arm and gripper, folded](media/images/build_07_arm_gripper_folded_20260926.jpg)
-
-![Arm and gripper, reaching](media/images/build_08_arm_gripper_reach_20260926.jpg)
-
-Build the SO-101 arm with the upstream guide, then the gripper. Bolt the arm plate to the hull, route the servo bus and the camera cable through the clips.
-
-## 8. Computer and sensors
-
-Jetson or Pi on its plate, depth camera at the nose with the right-angle USB cable, lidar on its mount. Then [Software](Software.md).
+[Visual guide](https://www.showrobotics.ai/moss/build/#assembly) · [Step-by-step instructions](docs/build/ASSEMBLY.md) · [Spacer and shaft-collar references](docs/build/PART_REFERENCES.md)
diff --git a/BOM.md b/BOM.md
index 0ddc07b..e2e4356 100644
--- a/BOM.md
+++ b/BOM.md
@@ -1,180 +1,119 @@
-# Bill of materials
-
-List prices in USD, one rover.
-
-## Totals
-
-| | Base assembly | Jetson + RealSense | Pi 5 + Hailo + Gemini | Pi 5 + Mighty |
-|---|---:|---:|---:|---:|
-| Base assembly (everything below) | 460 | 460 | 460 | 460 |
-| Computer | | 414 | 215 | 215 |
-| AI accelerator | | on board | 200 | none |
-| Camera at the nose | | 419 | 234 | 92 |
-| Wrist camera | | 19 | 19 | 19 |
-| 2D lidar | | 69 | 69 | 69 |
-| **Total** | **about $460** | **about $1,390** | **about $1,200** | **about $860** |
-
-## Jetson + RealSense, about $1,390
-
-Base assembly, plus:
-
-| Item | Qty | USD |
-|---|---:|---:|
-| NVIDIA Jetson Orin Nano Super Developer Kit | 1 | 399 |
-| microSD card | 1 | 15 |
-| Intel RealSense D455 | 1 | 419 |
-| USB 3.1 C to A cable, 90° plug with locking screws, 0.3 m | 1 | 7 |
-| Wrist camera, innomaker 1080p USB module, 32 × 32 mm | 1 | 19 |
-| SLAMTEC RPLIDAR C1 | 1 | 69 |
-
-## Pi 5 + Hailo + Gemini, about $1,200
-
-Base assembly, plus:
-
-| Item | Qty | USD |
-|---|---:|---:|
-| Raspberry Pi 5 8 GB | 1 | 175 |
-| Pi Active Cooler, microSD | 1 | 20 |
-| 12 V to 5 V 5 A converter, DC jack in, USB-C out, with fan | 1 | 20 |
-| Raspberry Pi AI HAT+ 2 (Hailo-10H, 40 TOPS) | 1 | 200 |
-| Orbbec Gemini 2 | 1 | 234 |
-| Wrist camera, innomaker 1080p USB module, 32 × 32 mm | 1 | 19 |
-| SLAMTEC RPLIDAR C1 | 1 | 69 |
-
-## Pi 5 + Mighty, about $860
-
-Base assembly, plus:
-
-| Item | Qty | USD |
-|---|---:|---:|
-| Raspberry Pi 5 8 GB | 1 | 175 |
-| Pi Active Cooler, microSD | 1 | 20 |
-| 12 V to 5 V 5 A converter, DC jack in, USB-C out, with fan | 1 | 20 |
-| Mighty Camera | 1 | 92 |
-| Wrist camera, innomaker 1080p USB module, 32 × 32 mm | 1 | 19 |
-| SLAMTEC RPLIDAR C1 | 1 | 69 |
-
-## Base assembly, about $460
-
-| Block | USD |
-|---|---:|
-| Control electronics | 49 |
-| Drive | 30 |
-| Arm and gripper | 160 |
-| Power and wiring | 67 |
-| Mechanical hardware | 61 |
-| Filament | 87 |
-| Fans and magnets | 5 |
-
-### Control electronics
-
-| Item | Qty | Unit | Line |
-|---|---:|---:|---:|
-| Adafruit QT Py ESP32-S3, 8 MB flash, no PSRAM (5426) | 1 | 12.50 | 12.50 |
-| Adafruit Terminal Block BFF (6495) | 1 | 10.95 | 10.95 |
-| Adafruit INA219 STEMMA QT (904) | 1 | 9.95 | 9.95 |
-| STEMMA QT cable, 300 mm (5384) | 1 | 1.25 | 1.25 |
-| Cytron MDD3A dual motor driver, 4–16 V, 3 A per channel | 1 | 9.53 | 9.53 |
-| Waveshare Bus Servo Adapter (A) | 1 | 5 | 5 |
-
-### Drive
-
-| Item | Qty | Unit | Line |
-|---|---:|---:|---:|
-| JGB37-520 gear motor, 12 V, 56:1, 178 rpm, Hall encoder, Ø6 mm D-shaft | 2 | 15 | 30 |
-
-### Arm and gripper
-
-| Item | Qty | Unit | Line |
-|---|---:|---:|---:|
-| ST3215 12 V bus servo | 5 | 22 | 110 |
-| CF35-12 constant-force servo (gripper) | 1 | 50 | 50 |
-
-### Power and wiring, about $67
-
-| Item | Qty | Unit | Line |
-|---|---:|---:|---:|
-| 12 V lithium pack 3S2P, 7,200 mAh, with BMS, XH2.54 and DC jack leads | 1 | 21 | 21 |
-| 12.6 V CC/CV charger | 1 | 12 | 12 |
-| Emergency stop LA16-11ZS/A, 16 mm | 1 | 2.25 | 2.25 |
-| Rocker switch KCD11, 2-pin with leads, and its splash cover | 1 | 0.50 | 0.50 |
-| Inline blade fuse holder, 14 AWG | 1 | 1.05 | 1.05 |
-| ATC blade fuse 15 A | 1 | 0.15 | 0.15 |
-| Amass XT30 connector pair, male and female | 6 | 0.80 | 4.80 |
-| DC panel socket 5.5 × 2.1 mm, waterproof | 2 | 1.50 | 3 |
-| Wiring, ferrules, heat-shrink | lot | 12 | 12 |
-| USB cables for the controller and the servo adapter | lot | 10 | 10 |
-
-### Mechanical hardware, about $61
-
-| Item | Qty |
-|---|---:|
-| Bearings 625 | 12 |
-| Bearings 608 | 4 |
-| Bearings 626 | 4 |
-| Shaft collars, Ø5 bore | 12 |
-| Shaft collars, Ø6 bore | 2 |
-| Shaft collars, Ø8 bore | 4 |
-| Shafts Ø5 × 80 mm | 6 |
-| Shafts Ø6 × 90 mm | 2 |
-| Shafts Ø8 × 100 mm | 2 |
-| Rigid motor-to-shaft couplings, Ø6 bores | 2 |
-| HEX12 metal wheel hubs, Ø6 bore, 18 mm | 2 |
-
-### Fasteners
-
-Socket head cap screws unless noted. Standard lengths only, in 5 mm steps above 10 mm; no screw is cut. Lengths under the head; countersunk screws: overall length.
-
-| Screw | Qty |
-|---|---:|
-| M3 × 8 | 12 |
-| M3 × 10 | 4 |
-| M3 × 10 countersunk 90°, head Ø 6.4 mm max | 10 |
-| M3 × 10 countersunk 90°, head Ø 5.6 mm max | 4 |
-| M3 × 15 | 22 |
-| M3 × 20 | 6 |
-| M3 × 25 | 6 |
-| M3 × 35 | 18 |
-| M4 × 15 | 6 |
-| M4 × 20 | 8 |
-| M4 × 35 | 2 |
-| M4 × 40 | 2 |
-| M4 × 60 | 4 |
-| M2 × 6 | 6 |
-| M2.5 × 8 | 4 |
-| M2.5 × 10 low head, Ø 5 mm max | 4 |
-| M3 hex nut | 52 |
-| M4 hex nut | 30 |
-| M4 washer | 8 |
-| M3 washer, 0.5 mm | 4 |
-| M2.5 washer, 0.5 mm | 4 |
-| M2 washer, 0.3 mm | 6 |
-
-From the servo and gripper kits, no purchase: M2 × 6 (20) and M3 × 6 (37) servo screws for the arm, M3 × 6 cross-head (11) and #1-42 × 3/16" self-tapping (6) for the gripper.
-
-Per configuration:
-
-| Configuration | Screws |
+# Bill of materials — R92
+
+One rover, using separate off-the-shelf modules. Choose one computer and one depth camera.
+
+## Control and audio
+
+| Item | Quantity | Note |
+|---|---:|---|
+| Adafruit QT Py ESP32-S3, 8 MB flash, no PSRAM, ref.5426 | 1 | |
+| Adafruit Terminal Block BFF, ref.6495 | 1 | |
+| Adafruit INA219 STEMMA QT, ref.904 | 1 | |
+| STEMMA QT cable, 300 mm, ref.5384 | 1 | |
+| Cytron MDD10A Rev2 dual motor driver | 1 | |
+| Waveshare Bus Servo Adapter A | 1 | |
+| MAX98357A amplifier module | 1 | |
+| Speaker, 3 W, 4 ohm | 1 | |
+| Acoustic splash membrane and compatible adhesive | 1 | EPTFE or non woven fabric membrane. |
+
+## Drive
+
+| Item | Quantity | Note |
+|---|---:|---|
+| JGB37-520, 12 V, 90:1, 110 rpm, Hall encoder, 6 mm D-shaft | 2 | |
+| 625 bearing | 12 | |
+| 608 bearing | 4 | |
+| 626 bearing | 4 | |
+| LK05 — shaft collar, 5 mm bore, Ø10 × 5 mm | 12 | |
+| LK06 — shaft collar, 6 mm bore, Ø11 × 5 mm | 2 | |
+| LK08 — shaft collar, 8 mm bore, Ø16 × 8 mm | 4 | |
+| Smooth steel axle, 5 ×70 mm finished length | 6 | Check the physical stack before cutting stock. |
+| Smooth steel axle, 6 ×77 mm finished length | 2 | |
+| Smooth steel axle, 8 ×87 mm finished length | 2 | |
+| Rigid motor-to-shaft coupling, 6 mm bores | 2 | |
+| HEX12 metal wheel hub, 6 mm bore, 18 mm length | 2 | |
+
+LK05/LK06/LK08 are guide identifiers for purchased shaft collars, also called lock rings. [All spacer and collar references](docs/build/PART_REFERENCES.md).
+
+## Arm, gripper and body
+
+| Item | Quantity | Note |
+|---|---:|---|
+| ST3215 12 V serial bus servo | 5 | Keep the original servo screw packs. |
+| CF35-12 constant-force gripper servo | 1 | |
+| 3010 fan, 12 V | 2 | |
+| Magnet, 20 ×10 ×2 mm | 4 | Glue into the pockets with epoxy; check polarity before gluing. |
+| Small two-part epoxy adhesive kit, two tubes (resin + hardener) | 1 kit | For gluing the four bin magnets and joining the two-piece hull and cover when printing on a smaller printer. |
+| M3 brass heat-set insert, OD4 mm, length 6 mm | 11 | 10 in the hull and 1 in the LiDAR base. |
+
+## Power and wiring — module-based rover
+
+| Item | Quantity | Note |
+|---|---:|---|
+| 12-cell battery pack, 3S4P, with BMS | 1 | 110 × 67 × 35 mm. |
+| 12.6 V CC/CV charger for the selected 3S pack | 1 | |
+| Emergency stop LA16-11ZS/A, 16 mm | 1 | |
+| KCD11 two-pin rocker switch and splash cover | 1 | |
+| Inline blade-fuse holder, 14 AWG | 1 | |
+| ATC blade fuse, 15 A | 1 | |
+| Amass XT30 male/female connector pair | 6 | |
+| DC panel socket, 5.5 ×2.1 mm | 2 | Female panel-mount sockets. |
+| DC male barrel plug — computer power branch | 1 | Jetson: **5.5 × 2.5 mm**, 9.5 mm barrel, centre positive ([NVIDIA specification](https://developer.nvidia.com/downloads/assets/embedded/secure/jetson/orin_nano/docs/jetson_orin_nano_devkit_carrier_board_specification_sp.pdf)). Pi option: choose the plug that matches the input of the selected 5 V power supply. These are alternatives. |
+| DC male barrel plug, 5.5 × 2.1 mm — servo power branch | 1 | For the Waveshare Bus Servo Adapter A ([Waveshare specification](https://docs.waveshare.com/Bus_Servo_Adapter_A)). |
+| DC male barrel plug, 5.5 × 2.1 mm — battery extension | 1 | Matches the 5.5 × 2.1 mm panel socket listed above. |
+| Wire, ferrules and heat-shrink | 1 lot | |
+| Plugable USB hub, model USB2-2port | 1 | |
+| USB-C to USB-A cable, 30 cm | 3 | |
+| RealSense camera cable | 1 | [Lazada product link](https://www.lazada.co.th/products/i16248699269-s127506585857.html) · RealSense option only. |
+
+## Choose one computer
+
+| Item | Quantity | Note |
+|---|---:|---|
+| NVIDIA Jetson Orin Nano Super Developer Kit | 1 | Use the Jetson carrier. |
+| OR Raspberry Pi5 with its cooler, storage and appropriate 5 V supply | 1 | Use the Pi carrier and the mounting screws and spacers supplied with the HAT. |
+
+## Sensors
+
+| Item | Quantity | Note |
+|---|---:|---|
+| Intel RealSense D455 OR Orbbec Gemini 2 | 1 | Use the matching printed insert(s); these are alternatives. |
+| SLAMTEC RPLIDAR C1 | 1 | |
+| Wrist USB camera for the R30 mount | 1 | PCB mounting-hole pattern: 21 × 13.5 mm. |
+
+## Fasteners by assembly
+
+Quantities are for one rover. Use the assembly step to locate each fastener.
+
+| Assembly | Fasteners for one rover |
|---|---|
-| Jetson | M3 × 8 (2) |
-| V0.6 compute dock, Pi or Jetson | M3 × 8 (4), M3 washer 0.5 mm (4), M3 heat-set insert Ø 4.6 × 5 mm (4) |
-| RealSense D455 | M4 × 10 (2) |
-| Orbbec Gemini 2 | M3 × 8 (2) |
-| RPLIDAR C1 | M2.5 × 6 (4) |
-
-Fixed with the files: SO-101 base to arm plate (4 × M4 × 25 countersunk, one clearance to solve), lidar mount (2 × M3 × 20 with a spacer), motor screws, Pi mount, HAT standoffs, wrist camera, Pi power box.
-
-### Filament
-
-| Filament | Qty | Unit | Line |
-|---|---:|---:|---:|
-| PETG, black (Sunlu) | 2 kg | 10.39 | 20.79 |
-| PLA, matte (Polymaker Panchroma) | 2 kg | 20.64 | 41.27 |
-| TPU 95A | 1 kg | 25 | 25 |
-
-### Fans and magnets
-
-| Item | Qty | Unit | Line |
-|---|---:|---:|---:|
-| 3010 fan, 12 V | 2 | 1.68 | 3.35 |
-| Magnet 20 × 10 × 2 mm | 4 | 0.43 | 1.73 |
+| Choose the hull and fit the inserts | 11 × M3 heat-set insert, OD4 mm, length 6 mm; 6 × Split hull only: M4 × 15 socket-head screw; 6 × Split hull only: M4 hex nut, 7 mm across flats; 6 × Split hull only: M4 washer, Ø9 × 0.8 mm |
+| Build the six road wheels | 18 × M3 × 35 socket-head screw; 18 × M3 hex nut |
+| Build the two drive wheels | 6 × M3 × 20 socket-head screw; 6 × M3 hex nut |
+| Build the two idler wheels | 6 × M3 × 25 socket-head screw; 6 × M3 hex nut |
+| Fit the motors and inner bearing retainers | 8 × M4 × 20 socket-head screw; 8 × M4 hex nut; 12 × M3 × 8 socket-head screw |
+| Fit the inner track frames | 6 × M4 × 15 socket-head screw; 6 × M4 hex nut |
+| Fit the drive axles and outer bearing covers | 6 × M3 × 15 socket-head screw; 6 × M3 hex nut |
+| Fit the idler slides and tensioners | 16 × M3 × 15 socket-head screw; 16 × M3 hex nut; 4 × M4 × 35 socket-head screw; 8 × M4 hex nut; 4 × M4 washer |
+| Close the track frames | 4 × M4 × 60 socket-head screw; 4 × M4 hex nut; 4 × M4 washer |
+| Fit the driver and controller | 4 × M3 × 6 socket-head screw; 6 × M2 × 6 screw, non-countersunk; 6 × M2 washer, 0.3 mm thick |
+| Fit the speaker and amplifier | 2 × M3 × 6 socket-head screw; 2 × M2 × 6 screw, non-countersunk; 2 × M2 washer, 0.5 mm thick |
+| Fit the computer carrier and servo adapter | 2 × M3 × 6 socket-head screw; 2 × M3 × 8 socket-head screw; 4 × M3 washer, 0.5 mm thick; 4 × M2.5 × 8 screw, non-countersunk; 4 × M2.5 washer, 0.5 mm thick; 2 × Jetson only: M3 × 8 socket-head screw, no washer |
+| Fit the camera option | 2 × RealSense only: M4 × 10 socket-head screw; 2 × Gemini only: M3 × 8 socket-head screw |
+| Fit the LiDAR carriage | 2 × M3 × 10 socket-head screw; 4 × M2.5 × 6 socket-head screw; 1 × M3 × 20 socket-head screw |
+| Fit power distribution and cooling | 4 × M2.5 × 10 low-head screw, head diameter 5 mm maximum |
+| Fit the arm plate and build the arm | 4 × M3 × 10 socket-head screw; 4 × M4 × 25 countersunk 90-degree screw; 4 × M4 hex nut; 20 × Kit screw: M2 × 6, original servo head; 37 × Kit screw: M3 × 6, original servo head |
+| Build the gripper and wrist camera | 11 × Kit screw: M3 × 6 cross-head ISO7045; 6 × Kit screw: #1-42 x3/16 inch typeAB; 4 × M2 × 6 screw, non-countersunk, for wrist camera PCB; 2 × M3 × 10 socket-head screw, for wrist camera bracket; 2 × M3 hex nut, for wrist camera bracket |
+| Close the hull and fit the bin | 10 × M3 × 10 countersunk 90-degree screw, head diameter 6.4 mm maximum; 4 × M3 × 10 countersunk 90-degree screw, head diameter 5.6 mm maximum |
+
+Screw lengths are measured under the head, except countersunk screws, which use their full length. Retain the original heads supplied with the servo and gripper kits. Camera screw sets are alternatives.
+
+[Measured fastener lengths](docs/build/FASTENER_MEASUREMENTS.md). Pi/HAT mounting hardware is supplied with the HAT; no separate screw purchase is added.
+
+The supplied computer carriers are for the NVIDIA Jetson Orin Nano and Raspberry Pi 5. Choose one carrier and one camera option.
+
+See the [assembly cards](docs/build/ASSEMBLY.md).
+
+## Adhesive for the split hull and cover
+
+Use the same two-part epoxy kit listed above. Retain the six M4 hull fixings and the four cover mounting screws.
diff --git a/NOTICE b/NOTICE
index e6fb1f6..5c7ea51 100644
--- a/NOTICE
+++ b/NOTICE
@@ -6,7 +6,7 @@ Hardware design files (hardware/): CERN Open Hardware Licence Version 2, Strongl
Documentation and media (*.md, media/): CC BY 4.0.
Parts derived from the SO-101 arm (TheRobotStudio/SO-ARM100, Apache-2.0) keep their upstream notice.
-The gripper is derived from NormaCore's parallel-jaw gripper, under NormaCore's licence.
+The gripper is derived from NormaCore's parallel-jaw gripper, under its supplied Apache-2.0 licence.
Parts of moss_dimos derive from earlier work by the same author, Apache-2.0. moss_dimos is an
external blueprint package for dimOS (https://github.com/dimensionalOS/dimos); portions are derived
@@ -15,3 +15,7 @@ from dimOS, Copyright 2025 Dimensional Inc., Apache-2.0.
The cockpit font, Space Grotesk (tools/moss_cockpit/fonts/), Copyright 2020 The Space Grotesk
Project Authors, is licensed under the SIL Open Font License 1.1 (OFL-1.1); the licence text ships
next to the font as SpaceGrotesk-OFL.txt.
+
+The R92 printable-source package excludes manufacturer electronics/camera reference models.
+Third-party music retains its own terms and is not relicensed by the documentation notice.
+The new R92 assembly clips are silent.
diff --git a/README.md b/README.md
index 87e0a29..dbbbec0 100644
--- a/README.md
+++ b/README.md
@@ -2,31 +2,30 @@
Cleaner streets, one maker at a time.
+> **MOSS kits are coming soon on [TNKR](https://tnkr.ai/).**
+> Skip printing and sourcing the parts yourself. **[Join the waitlist →](https://ak4khuvxkya.typeform.com/to/qaKmXNME)** to be notified when kits are available.
+
+**[Build guide](https://www.showrobotics.ai/moss/build/) · [Print parts](https://www.showrobotics.ai/moss/build/#print) · [Bill of materials](BOM.md) · [Download CAD & STL](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_R92_Mechanical_20261016.zip) · [Software setup](Software.md)**
+
MOSS is a small litter-picking rover you print and build yourself: a tracked base, a bin on top, an arm derived from the SO-101 with a parallel gripper. It is open hardware, built in public, and meant to be built by many hands.
![MOSS picking up a can: approach, grasp, lift, drop in the bin](media/images/moss_v05_pickup.gif)
-**Where it stands.** The first prototype rolls and carries its arm. Nothing has picked up litter on its own yet. The CAD is being finished on the real robot, and the files come out after one test: a full battery emptied over 3 km on the beach, tracks still on, no bolt lost. No date; it is posted when it is real.
-
-## Two ways to get one
+**Where it stands.** The physical rover drives and demonstrates pick-and-drop motions. Autonomous litter picking and the full field test are not yet demonstrated. The V0.6 / R92 CAD, STL files, BOM and assembly guide are now available.
-- **Build it yourself.** [Bill of materials](BOM.md) → [3D printing](3DPrinting.md) → [Assembly](Assembly.md) → [Software](Software.md). The STL and STEP files land in [`hardware/`](hardware/) when the design is frozen.
-- **Get the kit.** Kits and an interactive build guide are coming with [Tnkr](https://x.com/tnkrdotai). [Join the waitlist](https://ak4khuvxkya.typeform.com/to/qaKmXNME) to hear when the files and the kits are ready.
+## Build options
-## What it costs
+**Base assembly: about $460 in parts** — chassis, tracks, arm, gripper, power and filament.
-List prices for one rover, parts only.
+Add **one** configuration: **Jetson + RealSense**, **or Pi + Hailo + Gemini**, **or Pi + Mighty**.
-| Configuration | Parts |
+| Choose one configuration | Additional cost above the base (USD) |
|---|---:|
-| Base assembly: chassis, tracks, arm, gripper, power, filament | about $460 |
-| + Jetson Orin Nano Super, RealSense D455, wrist camera, 2D lidar | about $1,390 |
-| + Raspberry Pi 5, Hailo AI HAT, Orbbec Gemini 2, wrist camera, 2D lidar | about $1,200 |
-| + Raspberry Pi 5, Mighty camera, wrist camera, 2D lidar | about $860 |
+| Jetson Orin Nano Super, RealSense D455, wrist camera, 2D lidar | about $930 |
+| Raspberry Pi 5, Hailo AI HAT, Orbbec Gemini 2, wrist camera, 2D lidar | about $740 |
+| Raspberry Pi 5, Mighty camera, wrist camera, 2D lidar | about $400 |
-The Jetson configuration is the one on the bench. Every line is in the [BOM](BOM.md).
-
-![Your hardware, your MOSS: Pi or Jetson, RealSense or Gemini](media/images/moss_v06_modular.jpg)
+These option prices exclude the $460 base assembly. The [BOM](BOM.md) lists the components and hardware for each option.
## What it is made of
@@ -41,6 +40,8 @@ I pick up litter by hand on my walks. MOSS is the robot I want next to me doing
## News
+- 16 October 2026: **V0.6 / R92 is available.** [Build guide](https://www.showrobotics.ai/moss/build/), [CAD & STL package](https://github.com/metrox-eth/moss/releases/tag/v0.6-r92) and [BOM](BOM.md). One-piece and two-piece hull/cover options, modular computer and camera carriers, and short assembly videos.
+
- 15 October 2026: [MOSS Core V1D routed PCB draft](hardware/electronics/moss-core-v1d/): integrated audio and switched motor/servo power, published for review. Untested and not approved for fabrication. [V1C critical erratum](hardware/electronics/moss-core-v1d/V1C_CRITICAL_ERRATA.txt): do not fabricate V1C.
- 14 October 2026: [CAD development with Codex](docs/cad-with-codex.md): more battery room, integrated audio, a slimmer hull, a P1S split-hull option and deeper track guides. Images and geometry checks; physical validation is next.
- 3 October 2026: V0.6 makes the hardware modular, Pi or Jetson, RealSense or Gemini. Waitlist open with Tnkr.
diff --git a/docs/build/ASSEMBLY.md b/docs/build/ASSEMBLY.md
new file mode 100644
index 0000000..8554774
--- /dev/null
+++ b/docs/build/ASSEMBLY.md
@@ -0,0 +1,396 @@
+# Assembly guide
+
+Prepare the parts and fasteners for one step, then watch its short clip. Quantities are for one rover unless the text says per wheel. Computer and camera alternatives must not be added together.
+
+Seven coordinated clips cover part identification, five exploded assemblies and road-wheel fastening. Use the [reference list](PART_REFERENCES.md) to match every spacer and shaft collar.
+
+## 01. Choose the hull and fit the inserts
+
+| Prepare | Quantity |
+|---|---:|
+| [Hull_R92](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Hull_R92.stl) · PETG | 1 |
+| [Lidar_Base_R84](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Lidar_Base_R84.stl) · PETG | 1 |
+| [Hull_R92_Split_Rear_Motor_Computer](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Hull_R92_Split_Rear_Motor_Computer.stl) · PETG | 1 |
+| [Hull_R92_Split_Front_Battery_Camera](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Hull_R92_Split_Front_Battery_Camera.stl) · PETG | 1 |
+| Epoxy from the two-part kit, for the hull joint | As needed |
+| M3 heat-set insert, OD4 mm, length 6 mm | 11 |
+| Split hull only: M4 × 15 socket-head screw | 6 |
+| Split hull only: M4 hex nut, 7 mm across flats | 6 |
+| Split hull only: M4 washer, Ø9 × 0.8 mm | 6 |
+
+![Current R92 split hull, motor/computer half and battery/camera half](images/split-hull-r92.jpg)
+
+1. Choose the one-piece hull or both split halves. For the split hull, dry-fit both halves first, then apply a thin layer of two-part epoxy to the mating faces. Engage the locating pins, seat six nuts from the battery side, and fit six M4 × 15 screws with washers from the motor/computer side. Tighten progressively and let the epoxy cure before installing electronics or the battery.
+2. Use a soldering iron to fit the inserts: place each insert over its hole, heat it with the iron tip, then gently press it straight into the plastic. Fit four inserts for the cover, four for the arm plate and two for the LiDAR base in the hull.
+3. Use the same soldering-iron method to fit the remaining insert in the LiDAR base for the carriage lock. Keep the threads clear and let all inserts cool before fitting screws.
+
+## 02. Build the six road wheels
+
+| Prepare | Quantity |
+|---|---:|
+| [Left_625_road_wheel_-70_inner_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_625_road_wheel_-70_inner_half_R13.stl) · PETG | 1 |
+| [Left_625_road_wheel_-70_outer_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_625_road_wheel_-70_outer_half_R13.stl) · PETG | 1 |
+| [Left_625_road_wheel_70_inner_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_625_road_wheel_70_inner_half_R13.stl) · PETG | 1 |
+| [Left_625_road_wheel_70_outer_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_625_road_wheel_70_outer_half_R13.stl) · PETG | 1 |
+| [Right_625_road_wheel_-70_inner_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_625_road_wheel_-70_inner_half_R13.stl) · PETG | 1 |
+| [Right_625_road_wheel_-70_outer_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_625_road_wheel_-70_outer_half_R13.stl) · PETG | 1 |
+| [Right_625_road_wheel_70_inner_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_625_road_wheel_70_inner_half_R13.stl) · PETG | 1 |
+| [Right_625_road_wheel_70_outer_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_625_road_wheel_70_outer_half_R13.stl) · PETG | 1 |
+| [Left_625_road_wheel_0_inner_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_625_road_wheel_0_inner_half_R13.stl) · PETG | 1 |
+| [Left_625_road_wheel_0_outer_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_625_road_wheel_0_outer_half_R13.stl) · PETG | 1 |
+| [Right_625_road_wheel_0_inner_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_625_road_wheel_0_inner_half_R13.stl) · PETG | 1 |
+| [Right_625_road_wheel_0_outer_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_625_road_wheel_0_outer_half_R13.stl) · PETG | 1 |
+| [SP09 · Left_Spacer_road_wheel_-70_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_-70_center.stl) · PETG | 1 |
+| [SP09 · Left_Spacer_road_wheel_0_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_0_center.stl) · PETG | 1 |
+| [SP09 · Left_Spacer_road_wheel_70_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_70_center.stl) · PETG | 1 |
+| [SP09 · Right_Spacer_road_wheel_-70_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_-70_center.stl) · PETG | 1 |
+| [SP09 · Right_Spacer_road_wheel_0_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_0_center.stl) · PETG | 1 |
+| [SP09 · Right_Spacer_road_wheel_70_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_70_center.stl) · PETG | 1 |
+| 625 bearing | 12 |
+| M3 × 35 socket-head screw | 18 |
+| M3 hex nut | 18 |
+
+1. For each wheel, prepare two printed halves, one SP09 centre spacer, two 625 bearings, three M3 × 35 screws and three M3 nuts.
+2. Insert each bearing through the open mating face of its wheel half. Do not push it through the smaller outside opening.
+3. Seat the three nuts in the inner half, position SP09 between the bearings, close the wheel halves, then insert the three screws from the outer face. Repeat six times.
+
+[Watch the fastening example](videos/06-road-wheel-screws.mp4)
+
+## 03. Build the two drive wheels
+
+| Prepare | Quantity |
+|---|---:|
+| [Left_HEX12_drive_wheel_inner_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_HEX12_drive_wheel_inner_half_R13.stl) · PETG | 1 |
+| [Left_HEX12_drive_wheel_outer_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_HEX12_drive_wheel_outer_half_R13.stl) · PETG | 1 |
+| [Right_HEX12_drive_wheel_inner_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_HEX12_drive_wheel_inner_half_R13.stl) · PETG | 1 |
+| [Right_HEX12_drive_wheel_outer_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_HEX12_drive_wheel_outer_half_R13.stl) · PETG | 1 |
+| HEX12 metal hub, 6 mm bore, 18 mm length | 2 |
+| M3 × 20 socket-head screw | 6 |
+| M3 hex nut | 6 |
+
+1. Match the locating feature on each pair of halves.
+2. Close each wheel with three M3 × 20 screws and three M3 nuts. Keep the HEX12 seat clear.
+
+## 04. Build the two idler wheels
+
+| Prepare | Quantity |
+|---|---:|
+| [Left_22T_idler_wheel_inner_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_22T_idler_wheel_inner_half_R13.stl) · PETG | 1 |
+| [Left_22T_idler_wheel_outer_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_22T_idler_wheel_outer_half_R13.stl) · PETG | 1 |
+| [Right_22T_idler_wheel_inner_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_22T_idler_wheel_inner_half_R13.stl) · PETG | 1 |
+| [Right_22T_idler_wheel_outer_half_R13](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_22T_idler_wheel_outer_half_R13.stl) · PETG | 1 |
+| [SP10 · Left_Spacer_tensioner_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_center.stl) · PETG | 1 |
+| [SP10 · Right_Spacer_tensioner_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_center.stl) · PETG | 1 |
+| 608 bearing | 4 |
+| M3 × 25 socket-head screw | 6 |
+| M3 hex nut | 6 |
+
+1. For each idler, seat two 608 bearings with SP10 (centre spacer) between them.
+2. Close the two halves with three M3 × 25 screws and three M3 nuts. Repeat for the other side.
+
+## 05. Fit the motors and inner bearing retainers
+
+| Prepare | Quantity |
+|---|---:|
+| [Motor_Mount_Left_R90](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Motor_Mount_Left_R90.stl) · PETG | 1 |
+| [Motor_Mount_Right_R90](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Motor_Mount_Right_R90.stl) · PETG | 1 |
+| [05_Left_bearing_retainer](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/05_Left_bearing_retainer.stl) · PETG | 1 |
+| [06_Right_bearing_retainer](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/06_Right_bearing_retainer.stl) · PETG | 1 |
+| JGB37-520 motor, 12 V, 90:1, 110 rpm, Hall encoder | 2 |
+| 626 bearing, inner | 2 |
+| Rigid coupling, 6 mm to6 mm | 2 |
+| M4 × 20 socket-head screw | 8 |
+| M4 hex nut | 8 |
+| M3 × 8 socket-head screw | 12 |
+
+1. Use three M3 × 8 screws per motor, without washers. The other six M3 × 8 screws secure the two bearing retainers.
+2. Put four M4 nuts into each motor-support nut pocket and secure each support to the hull with four M4 × 20 screws.
+3. Fit the inner bearing retainers with three M3 × 8 screws per side.
+
+## 06. Fit the inner track frames
+
+| Prepare | Quantity |
+|---|---:|
+| [Left_inner_track_frame_R12_C2](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_inner_track_frame_R12_C2.stl) · PETG | 1 |
+| [Right_inner_track_frame_R12_C2](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_inner_track_frame_R12_C2.stl) · PETG | 1 |
+| M4 × 15 socket-head screw | 6 |
+| M4 hex nut | 6 |
+
+1. Fit each inner frame directly against the hull.
+2. Use three M4 × 15 screws and three M4 nuts per side.
+
+## 07. Fit road-wheel axles and spacer pairs
+
+| Prepare | Quantity |
+|---|---:|
+| [SP01 · Left_Spacer_road_wheel_-70_inner_ID01_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_-70_inner_ID01_R24.stl) · PETG | 1 |
+| [SP01 · Left_Spacer_road_wheel_0_inner_ID01_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_0_inner_ID01_R24.stl) · PETG | 1 |
+| [SP01 · Left_Spacer_road_wheel_70_inner_ID01_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_70_inner_ID01_R24.stl) · PETG | 1 |
+| [SP01 · Right_Spacer_road_wheel_-70_inner_ID01_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_-70_inner_ID01_R24.stl) · PETG | 1 |
+| [SP01 · Right_Spacer_road_wheel_0_inner_ID01_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_0_inner_ID01_R24.stl) · PETG | 1 |
+| [SP01 · Right_Spacer_road_wheel_70_inner_ID01_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_70_inner_ID01_R24.stl) · PETG | 1 |
+| [SP02 · Left_Spacer_road_wheel_-70_outer_ID02_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_-70_outer_ID02_R24.stl) · PETG | 1 |
+| [SP02 · Left_Spacer_road_wheel_0_outer_ID02_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_0_outer_ID02_R24.stl) · PETG | 1 |
+| [SP02 · Left_Spacer_road_wheel_70_outer_ID02_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_70_outer_ID02_R24.stl) · PETG | 1 |
+| [SP02 · Right_Spacer_road_wheel_-70_outer_ID02_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_-70_outer_ID02_R24.stl) · PETG | 1 |
+| [SP02 · Right_Spacer_road_wheel_0_outer_ID02_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_0_outer_ID02_R24.stl) · PETG | 1 |
+| [SP02 · Right_Spacer_road_wheel_70_outer_ID02_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_70_outer_ID02_R24.stl) · PETG | 1 |
+| Smooth steel axle, 5 x70 mm finished length | 6 |
+| LK05 — shaft collar: 5 mm bore, 10 mm outside diameter, 5 mm long | 12 |
+
+1. Use SP01 (1 dot, 7.5 mm) on the inside and SP02 (2 dots, 5.5 mm) on the outside of every road wheel. SP09 (18 mm, no dots) sits between its bearings.
+2. Retain each axle with two LK05 collars (5 mm bore). Repeat for all six wheels and check free rotation.
+
+[Watch the exploded assembly](videos/02-road-wheel-spacers.mp4)
+
+## 08. Fit the drive axles and outer bearing covers
+
+| Prepare | Quantity |
+|---|---:|
+| [SP03 · Left_Spacer_drive_inner_ID03_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_drive_inner_ID03_R24.stl) · PETG | 1 |
+| [SP03 · Right_Spacer_drive_inner_ID03_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_drive_inner_ID03_R24.stl) · PETG | 1 |
+| [SP04 · Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl) · PETG | 1 |
+| [SP04 · Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl) · PETG | 1 |
+| [Left_Cover_motor_bearing](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Cover_motor_bearing.stl) · PETG | 1 |
+| [Right_Cover_motor_bearing](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Cover_motor_bearing.stl) · PETG | 1 |
+| [SP11 · Left_Drive_bearing_to_collar_spacer_R12_C1](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Drive_bearing_to_collar_spacer_R12_C1.stl) · PETG | 1 |
+| [SP11 · Right_Drive_bearing_to_collar_spacer_R12_C1](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Drive_bearing_to_collar_spacer_R12_C1.stl) · PETG | 1 |
+| Smooth steel axle, 6 x77 mm finished length | 2 |
+| 626 bearing, outer | 2 |
+| LK06 — shaft collar: 6 mm bore, 11 mm outside diameter, 5 mm long | 2 |
+| M3 × 15 socket-head screw | 6 |
+| M3 hex nut | 6 |
+
+1. Use SP03 (3 dots, 7.6 mm) on the motor side and SP04 (4 dots, 12.6 mm) on the outer side of the drive wheel.
+2. Put SP11 (3.5 mm, no dots) between the outer 626 bearing and LK06 (6 mm bore). Secure each bearing cover with three M3 × 15 screws and nuts.
+
+[Watch the exploded assembly](videos/03-drive-wheel-spacers.mp4)
+
+## 09. Fit the idler slides and tensioners
+
+| Prepare | Quantity |
+|---|---:|
+| [Left_inner_tensioner_cover_R12_C2](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_inner_tensioner_cover_R12_C2.stl) · PETG | 1 |
+| [Right_inner_tensioner_cover_R12_C2](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_inner_tensioner_cover_R12_C2.stl) · PETG | 1 |
+| [SP05 · Left_Spacer_tensioner_inner_ID05_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_inner_ID05_R24.stl) · PETG | 1 |
+| [SP05 · Right_Spacer_tensioner_inner_ID05_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_inner_ID05_R24.stl) · PETG | 1 |
+| [SP06 · Left_Spacer_tensioner_outer_ID06_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_outer_ID06_R24.stl) · PETG | 1 |
+| [SP06 · Right_Spacer_tensioner_outer_ID06_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_outer_ID06_R24.stl) · PETG | 1 |
+| [Left_Cover_tensioner_outer](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Cover_tensioner_outer.stl) · PETG | 1 |
+| [Right_Cover_tensioner_outer](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Cover_tensioner_outer.stl) · PETG | 1 |
+| [Left_Slider_outer](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Slider_outer.stl) · PETG | 1 |
+| [Right_Slider_outer](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Slider_outer.stl) · PETG | 1 |
+| [Left_inner_tensioner_slider](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_inner_tensioner_slider.stl) · PETG | 1 |
+| [Right_inner_tensioner_slider](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_inner_tensioner_slider.stl) · PETG | 1 |
+| [SP07 · Left_Spacer_tensioner_retainer_inner_ID07_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_retainer_inner_ID07_R24.stl) · PETG | 1 |
+| [SP08 · Left_Spacer_tensioner_retainer_outer_ID08_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_retainer_outer_ID08_R24.stl) · PETG | 1 |
+| [SP07 · Right_Spacer_tensioner_retainer_inner_ID07_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_retainer_inner_ID07_R24.stl) · PETG | 1 |
+| [SP08 · Right_Spacer_tensioner_retainer_outer_ID08_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_retainer_outer_ID08_R24.stl) · PETG | 1 |
+| Smooth steel axle, 8 x87 mm finished length | 2 |
+| LK08 — shaft collar: 8 mm bore, 16 mm outside diameter, 8 mm long | 4 |
+| M3 × 15 socket-head screw | 16 |
+| M3 hex nut | 16 |
+| M4 × 35 socket-head screw | 4 |
+| M4 hex nut | 8 |
+| M4 washer | 4 |
+
+1. Inside to outside: LK08, SP07, inner slider, SP05, idler wheel with SP10 between its bearings, SP06, outer slider, SP08, LK08. Use two LK08 collars (8 mm bore) per axle.
+2. Fit each tensioner cover with four M3 × 15 screws and nuts. Use an M4 × 35 adjuster with its washer and two nuts at each of the four tensioners.
+
+[Watch the exploded assembly](videos/04-idler-tensioner-spacers.mp4)
+
+## 10. Close the track frames
+
+| Prepare | Quantity |
+|---|---:|
+| [Left_Outer_Track_Frame_R32](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Outer_Track_Frame_R32.stl) · PETG | 1 |
+| [Right_Outer_Track_Frame_R32](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Outer_Track_Frame_R32.stl) · PETG | 1 |
+| [SP12 · Left_Spacer_cross_member_-40](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_cross_member_-40.stl) · PETG | 1 |
+| [SP12 · Left_Spacer_cross_member_40](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_cross_member_40.stl) · PETG | 1 |
+| [SP12 · Right_Spacer_cross_member_-40](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_cross_member_-40.stl) · PETG | 1 |
+| [SP12 · Right_Spacer_cross_member_40](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_cross_member_40.stl) · PETG | 1 |
+| M4 × 60 socket-head screw | 4 |
+| M4 hex nut | 4 |
+| M4 washer | 4 |
+
+1. Put the two SP12 cross-member spacers (41 mm, no dots) in each side assembly.
+2. Fit the outer frame using two M4 × 60 screws, washers and nuts per side.
+
+[Watch the exploded assembly](videos/05-track-side-reassembly.mp4)
+
+## 11. Fit the tracks
+
+| Prepare | Quantity |
+|---|---:|
+| [Left_Track_R78_70_Teeth](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Track_R78_70_Teeth.stl) · TPU | 1 |
+| [Right_Track_R78_70_Teeth](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Track_R78_70_Teeth.stl) · TPU | 1 |
+
+1. Use the 70-tooth track print masters supplied in this package.
+2. Seat the central guides in the wheel grooves. Adjust both ends evenly and turn each track by hand.
+
+## 12. Fit the driver and controller
+
+| Prepare | Quantity |
+|---|---:|
+| Cytron MDD10A Rev2 dual motor driver | 1 |
+| Adafruit QT Py ESP32-S3, 5426 | 1 |
+| Adafruit Terminal Block BFF, 6495 | 1 |
+| Adafruit INA219 STEMMA QT, 904 | 1 |
+| M3 × 6 socket-head screw | 4 |
+| M2 × 6 screw, non-countersunk | 6 |
+| M2 washer, 0.3 mm thick | 6 |
+
+1. Secure the MDD10A with four M3 × 6 screws.
+2. Use four M2 × 6 screws and 0.3 mm washers for the BFF, and two of each for the INA219.
+
+## 13. Fit the speaker and amplifier
+
+| Prepare | Quantity |
+|---|---:|
+| Speaker, 3 W, 4 ohm, 2-pin connector with 2 mm pitch | 1 |
+| MAX98357A amplifier module | 1 |
+| Splash-resistant acoustic membrane, fitted to the inner grille lip | 1 |
+| M3 × 6 socket-head screw | 2 |
+| M2 × 6 screw, non-countersunk | 2 |
+| M2 washer, 0.5 mm thick | 2 |
+
+1. Fix the speaker with two M3 × 6 screws above its grille.
+2. Seat the amplifier on its two mounting posts and two support pillars. Use two M2 × 6 screws with 0.5 mm washers.
+
+## 14. Fit the computer carrier and servo adapter
+
+| Prepare | Quantity |
+|---|---:|
+| [Pi_Adapter_R87](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Pi_Adapter_R87.stl) · PETG | 1 |
+| [Jetson_Adapter_R87](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Jetson_Adapter_R87.stl) · PETG | 1 |
+| Waveshare Bus Servo Adapter A | 1 |
+| Pi only: HAT mounting screws and spacers, supplied with the HAT | 1 kit |
+| M3 × 6 socket-head screw | 2 |
+| M3 × 8 socket-head screw | 2 |
+| M3 washer, 0.5 mm thick | 4 |
+| M2.5 × 8 screw, non-countersunk | 4 |
+| M2.5 washer, 0.5 mm thick | 4 |
+| Jetson only: M3 × 8 socket-head screw, no washer | 2 |
+
+1. Choose one carrier: Jetson or Pi.
+2. Use the two M3 × 6 screws at the front and the two M3 × 8 screws at the rear, with one 0.5 mm washer each.
+3. For Jetson, secure the two retaining tabs with two M3 × 8 screws, without washers.
+4. For Pi/HAT, use the screws and spacers supplied with the HAT; prepare this assembly before fitting the carrier in the hull.
+
+## 15. Fit the camera option
+
+| Prepare | Quantity |
+|---|---:|
+| [Gemini_Window_Adapter_R89](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Gemini_Window_Adapter_R89.stl) · PETG | 1 |
+| [RealSense_Insert_R72](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/RealSense_Insert_R72.stl) · PETG | 1 |
+| [Gemini_Flush_Insert_R72](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Gemini_Flush_Insert_R72.stl) · PETG | 1 |
+| RealSense D455 OR Orbbec Gemini 2 | 1 |
+| RealSense only: M4 × 10 socket-head screw | 2 |
+| Gemini only: M3 × 8 socket-head screw | 2 |
+
+1. For RealSense, slide the support insert down from the top, then use its two M4 × 10 screws.
+2. For Gemini, use the flush insert and the window bezel instead. Secure the camera with two M3 × 8 screws; keep the USB opening clear.
+
+## 16. Fit the LiDAR carriage
+
+| Prepare | Quantity |
+|---|---:|
+| [Lidar_dovetail_carriage_R21](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Lidar_dovetail_carriage_R21.stl) · PETG | 1 |
+| SLAMTEC RPLIDAR C1 | 1 |
+| M3 × 10 socket-head screw | 2 |
+| M2.5 × 6 socket-head screw | 4 |
+| M3 × 20 socket-head screw | 1 |
+
+1. With the carriage removed, secure the LiDAR base to the hull with two M3 × 10 screws.
+2. Secure the C1 to the carriage with four M2.5 × 6 screws, slide it onto the base and lock it with the M3 × 20 screw, without a washer, into the M3 insert.
+
+## 17. Fit power distribution and cooling
+
+| Prepare | Quantity |
+|---|---:|
+| [XT30_distribution_base](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/XT30_distribution_base.stl) · PETG | 1 |
+| [XT30_distribution_lid](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/XT30_distribution_lid.stl) · PETG | 1 |
+| [XT30_insulating_separator](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/XT30_insulating_separator.stl) · PETG | 1 |
+| 3010 fan, 12 V | 2 |
+| 12-cell battery pack, 3S4P, with BMS, 110 × 67 × 35 mm | 1 |
+| Power harness wire, fuse, switches and USB cables | 1 |
+| DC male barrel plug, 5.5 × 2.5 mm, 9.5 mm barrel, centre positive — Jetson power | 1 |
+| DC male barrel plug matching the input of the Pi 5 V power supply | 1 |
+| DC male barrel plug, 5.5 × 2.1 mm — Waveshare Bus Servo Adapter A power | 1 |
+| DC male barrel plug, 5.5 × 2.1 mm — battery extension to the panel socket | 1 |
+| XT30 enclosure connectors: 1 input + 4 outputs, from the BOM connector pairs | 5 |
+| M2.5 × 10 low-head screw, head diameter 5 mm maximum | 4 |
+
+1. Clip the two fans into their mounts.
+2. Assemble the XT30 base, insulating separator and lid with four low-head M2.5 × 10 screws.
+
+[Watch the exploded assembly](videos/07-xt30-power-distribution.mp4)
+
+## 18. Fit the arm plate and build the arm
+
+| Prepare | Quantity |
+|---|---:|
+| [Arm_Mounting_Platform_R22](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Arm_Mounting_Platform_R22.stl) · PLA | 1 |
+| [SO101_Base](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Base.stl) · PLA | 1 |
+| [SO101_Shoulder_rotation](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Shoulder_rotation.stl) · PLA | 1 |
+| [SO101_Base_motor_holder](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Base_motor_holder.stl) · PLA | 1 |
+| [SO101_Shoulder_bracket_cable_clip](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Shoulder_bracket_cable_clip.stl) · PLA | 1 |
+| [SO101_Upper_arm_cable_clip](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Upper_arm_cable_clip.stl) · PLA | 1 |
+| [SO101_Forearm_cable_clip](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Forearm_cable_clip.stl) · PLA | 1 |
+| [SO101_Wrist_cable_clip](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Wrist_cable_clip.stl) · PLA | 1 |
+| [SO101_Wrist_bracket](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Wrist_bracket.stl) · PLA | 1 |
+| ST3215 12 V serial bus servo | 5 |
+| M3 × 10 socket-head screw | 4 |
+| M4 × 25 countersunk 90-degree screw | 4 |
+| M4 hex nut | 4 |
+| Kit screw: M2 × 6, original servo head | 20 |
+| Kit screw: M3 × 6, original servo head | 37 |
+
+1. Fit the arm plate with four M3 × 10 socket-head screws. Do not add washers in the counterbores.
+2. Use the original servo screw packs for the SO101 joints. Keep the camera and servo cables in the printed guides.
+3. For the wrist-camera cable, heat the printed clips to 70 °C, then close them around the cable.
+
+## 19. Build the gripper and wrist camera
+
+| Prepare | Quantity |
+|---|---:|
+| [NC90_Right_side_shield](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Right_side_shield.stl) · PLA | 1 |
+| [NC90_Pinion](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Pinion.stl) · PLA | 1 |
+| [NC90_Cable_guide](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Cable_guide.stl) · PLA | 1 |
+| [NC90_Right_jaw_extended_rack](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Right_jaw_extended_rack.stl) · PLA | 1 |
+| [Gripper_Camera_Mount_R30](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Gripper_Camera_Mount_R30.stl) · PLA | 1 |
+| [NC90_Left_side_shield](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Left_side_shield.stl) · PLA | 1 |
+| [NC90_Base_extended_rails](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Base_extended_rails.stl) · PLA | 1 |
+| [NC90_Left_jaw_extended_rack](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Left_jaw_extended_rack.stl) · PLA | 1 |
+| CF35-12 gripper servo | 1 |
+| Wrist USB camera for the R30 mount, 21 × 13.5 mm PCB hole pattern | 1 |
+| Kit screw: M3 × 6 cross-head ISO7045 | 11 |
+| Kit screw: #1-42 x3/16 inch typeAB | 6 |
+| M2 × 6 screw, non-countersunk, for wrist camera PCB | 4 |
+| M3 × 10 socket-head screw, for wrist camera bracket | 2 |
+| M3 hex nut, for wrist camera bracket | 2 |
+
+1. Use the widened NC90 jaws and rails, keeping the two racks in phase.
+2. Fit the current camera mount. Retain the original gripper screw types.
+3. Fix the R30 camera bracket to the gripper with two M3 × 10 screws and two M3 nuts, without washers. Fix the matching camera PCB with four M2 × 6 screws.
+
+## 20. Close the hull and fit the bin
+
+| Prepare | Quantity |
+|---|---:|
+| [02_Motor_access_hatch_10_screws](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/02_Motor_access_hatch_10_screws.stl) · PETG | 1 |
+| [Upper_cover_R9](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Upper_cover_R9.stl) · PLA | 1 |
+| [Upper_Cover_R10_Rear](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Upper_Cover_R10_Rear.stl) · PLA | 1 |
+| [Upper_Cover_R10_Lidar_Extension](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Upper_Cover_R10_Lidar_Extension.stl) · PLA | 1 |
+| Magnet, 20 x10 x2 mm | 4 |
+| Small two-part epoxy adhesive kit, two tubes (resin + hardener), for the magnets and split cover | 1 kit |
+| M3 × 10 countersunk 90-degree screw, head diameter 6.4 mm maximum | 10 |
+| M3 × 10 countersunk 90-degree screw, head diameter 5.6 mm maximum | 4 |
+
+![Two-piece upper cover: lower the LiDAR extension into the two dovetail sockets from above](images/split-cover-r10.jpg)
+
+1. For the split cover: test-fit the two pieces off the rover. Lower the LiDAR extension from above into both dovetail sockets. Apply a thin layer of two-part epoxy on the mating faces, seat the joint, align the outer surfaces and hold until cured. The glued cover then mounts with the same four screws as the one-piece cover.
+2. Close the motor hatch with ten M3 × 10 countersunk screws.
+3. Fit the upper cover with four M3 × 10 countersunk screws.
+4. Check the polarity of all four magnets, then glue them into their pockets with epoxy. Let the epoxy cure before fitting the bin.
+
diff --git a/docs/build/FASTENER_MEASUREMENTS.md b/docs/build/FASTENER_MEASUREMENTS.md
new file mode 100644
index 0000000..6f308bf
--- /dev/null
+++ b/docs/build/FASTENER_MEASUREMENTS.md
@@ -0,0 +1,22 @@
+# Measured fastening lengths
+
+Dimensions were checked against the current R92 printable STEP and the component references. Quantities are for one rover; Jetson and Pi are alternatives.
+
+| Joint | Prepare | Measurement |
+|---|---|---|
+| Motor to printed bracket | 6 × M3 × 8 socket-head screws; no washers | 5 mm bracket + 3 mm into the motor. The reference motor has a 4 mm deep hole. |
+| Jetson retaining tabs | 2 × M3 × 8 socket-head screws; no washers | 2.4 mm tab + 5.6 mm into the printed pilot. The shorter current pilot is 6.5 mm deep. |
+| Pi / HAT | Use the screws and spacers supplied with the HAT | The carrier passage is 9.3 mm; with the 1.6 mm PCB the lower stack is 10.9 mm. The reference spacers are 16 mm tall. |
+| Wrist camera PCB, R30 mount | 4 × M2 × 6 non-countersunk screws | 1.6 mm PCB + 4.4 mm in the Ø1.7 mm printed pilots. |
+| Wrist-camera bracket to gripper | 2 × M3 × 10 socket-head screws + 2 × M3 hex nuts; no washers | 5.5 mm through the printed bracket. The existing assembly check leaves 0.75 mm between screw tip and servo. |
+| LiDAR carriage lock | 1 × M3 × 20 socket-head screw; no washer | 15 mm carriage + 0.2 mm insert recess + 4.8 mm thread engagement; 1.2 mm remains before the rear of the 6 mm insert. |
+
+The wrist-camera measurements apply to the R30 mount with its 21 × 13.5 mm PCB hole pattern. Use the camera that matches this mount.
+
+## Pi / HAT hardware
+
+Use the HAT's supplied mounting hardware. No separate HAT screw purchase is added. The measured carrier thickness does not establish the length of the screws in the received kit. Raspberry Pi describes the supplied spacers and upper/lower screw sets in its [AI HAT assembly instructions](https://www.raspberrypi.com/documentation/accessories/ai-hat-plus.html#hardware-assembly).
+
+## Jetson retaining tabs
+
+The retaining-tab STL files are not included in this package. The two screws listed above are for tabs that are 2.4 mm thick.
diff --git a/docs/build/OUTER_FRAME_PRINTING.md b/docs/build/OUTER_FRAME_PRINTING.md
new file mode 100644
index 0000000..cf90730
--- /dev/null
+++ b/docs/build/OUTER_FRAME_PRINTING.md
@@ -0,0 +1,12 @@
+# Outer track frames: diagonal placement
+
+![Outer frames on the print bed](images/outer-frame-diagonal.jpg)
+
+Print each outer frame separately, flat on the plate, along the **front-right to rear-left diagonal**. The supplied left and right STL files are already rotated 45 degrees; keep that rotation and centre the part.
+
+On a P1S, this direction avoids the excluded area at the **front-left** corner. The actual part footprint is approximately **242 × 242 mm**, with at least **6.8 mm** clearance to the bed edges when centred on the 256 × 256 mm plate. This check covers the part itself; verify any brim or skirt in the slicer preview.
+
+Use **PETG**, the standard/default profile and **15% gyroid infill**.
+
+- [Left outer frame](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Outer_Track_Frame_R32.stl)
+- [Right outer frame](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Outer_Track_Frame_R32.stl)
diff --git a/docs/build/PART_REFERENCES.md b/docs/build/PART_REFERENCES.md
new file mode 100644
index 0000000..86fc255
--- /dev/null
+++ b/docs/build/PART_REFERENCES.md
@@ -0,0 +1,102 @@
+# Spacer and shaft-collar references
+
+Use the same reference in the clips, the parts list and the print catalogue. Quantities are for one rover.
+
+SP01–SP08 match the existing dot IDs. SP09–SP12 are guide references only; these pieces have no dot marking. LK codes identify purchased shaft collars (also called lock rings), not printed parts.
+
+| Ref | Part | Length | Bore | Outside diameter | Qty | Mark |
+|---|---|---:|---:|---:|---:|---|
+| SP01 | Road wheel / inner | 7.5 mm | 5.3 mm | 7.6 mm | 6 | 1 dots |
+| SP02 | Road wheel / outer | 5.5 mm | 5.3 mm | 7.6 mm | 6 | 2 dots |
+| SP03 | Drive / motor side | 7.6 mm | 6.4 mm | 9 mm | 2 | 3 dots |
+| SP04 | Drive / outer | 12.6 mm | 6.4 mm | 9 mm | 2 | 4 dots |
+| SP05 | Idler / inner | 15.4 mm | 8.4 mm | 12 mm | 2 | 5 dots |
+| SP06 | Idler / outer | 13.4 mm | 8.4 mm | 12 mm | 2 | 6 dots |
+| SP07 | Idler / inner retainer | 6.3 mm | 8.4 mm | 12 mm | 2 | 7 dots |
+| SP08 | Idler / outer retainer | 6 mm | 8.4 mm | 12 mm | 2 | 8 dots |
+| SP09 | Road wheel / centre | 18 mm | 5.3 mm | 7.6 mm | 6 | No dots |
+| SP10 | Idler / centre | 3.8 mm | 8.4 mm | 12 mm | 2 | No dots |
+| SP11 | Drive / bearing to collar | 3.5 mm | 6.4 mm | 9 mm | 2 | No dots |
+| SP12 | Track frame / cross-member | 41 mm | 4.4 mm | 14 mm | 4 | No dots |
+| LK05 | Shaft collar / lock ring | 5 mm | 5 mm | 10 mm | 12 | Buy |
+| LK06 | Shaft collar / lock ring | 5 mm | 6 mm | 11 mm | 2 | Buy |
+| LK08 | Shaft collar / lock ring | 8 mm | 8 mm | 16 mm | 4 | Buy |
+
+Collar sizes are taken from the CAD envelopes. LK codes identify the dimensions in the table; they are not manufacturer part numbers.
+
+## Matching STL files
+
+### SP01 — Road wheel / inner
+
+- [Left_Spacer_road_wheel_-70_inner_ID01_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_-70_inner_ID01_R24.stl)
+- [Left_Spacer_road_wheel_0_inner_ID01_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_0_inner_ID01_R24.stl)
+- [Left_Spacer_road_wheel_70_inner_ID01_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_70_inner_ID01_R24.stl)
+- [Right_Spacer_road_wheel_-70_inner_ID01_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_-70_inner_ID01_R24.stl)
+- [Right_Spacer_road_wheel_0_inner_ID01_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_0_inner_ID01_R24.stl)
+- [Right_Spacer_road_wheel_70_inner_ID01_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_70_inner_ID01_R24.stl)
+
+### SP02 — Road wheel / outer
+
+- [Left_Spacer_road_wheel_-70_outer_ID02_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_-70_outer_ID02_R24.stl)
+- [Left_Spacer_road_wheel_0_outer_ID02_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_0_outer_ID02_R24.stl)
+- [Left_Spacer_road_wheel_70_outer_ID02_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_70_outer_ID02_R24.stl)
+- [Right_Spacer_road_wheel_-70_outer_ID02_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_-70_outer_ID02_R24.stl)
+- [Right_Spacer_road_wheel_0_outer_ID02_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_0_outer_ID02_R24.stl)
+- [Right_Spacer_road_wheel_70_outer_ID02_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_70_outer_ID02_R24.stl)
+
+### SP03 — Drive / motor side
+
+- [Left_Spacer_drive_inner_ID03_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_drive_inner_ID03_R24.stl)
+- [Right_Spacer_drive_inner_ID03_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_drive_inner_ID03_R24.stl)
+
+### SP04 — Drive / outer
+
+- [Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl)
+- [Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl)
+
+### SP05 — Idler / inner
+
+- [Left_Spacer_tensioner_inner_ID05_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_inner_ID05_R24.stl)
+- [Right_Spacer_tensioner_inner_ID05_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_inner_ID05_R24.stl)
+
+### SP06 — Idler / outer
+
+- [Left_Spacer_tensioner_outer_ID06_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_outer_ID06_R24.stl)
+- [Right_Spacer_tensioner_outer_ID06_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_outer_ID06_R24.stl)
+
+### SP07 — Idler / inner retainer
+
+- [Left_Spacer_tensioner_retainer_inner_ID07_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_retainer_inner_ID07_R24.stl)
+- [Right_Spacer_tensioner_retainer_inner_ID07_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_retainer_inner_ID07_R24.stl)
+
+### SP08 — Idler / outer retainer
+
+- [Left_Spacer_tensioner_retainer_outer_ID08_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_retainer_outer_ID08_R24.stl)
+- [Right_Spacer_tensioner_retainer_outer_ID08_R24](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_retainer_outer_ID08_R24.stl)
+
+### SP09 — Road wheel / centre
+
+- [Left_Spacer_road_wheel_-70_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_-70_center.stl)
+- [Left_Spacer_road_wheel_0_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_0_center.stl)
+- [Left_Spacer_road_wheel_70_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_70_center.stl)
+- [Right_Spacer_road_wheel_-70_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_-70_center.stl)
+- [Right_Spacer_road_wheel_0_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_0_center.stl)
+- [Right_Spacer_road_wheel_70_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_70_center.stl)
+
+### SP10 — Idler / centre
+
+- [Left_Spacer_tensioner_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_center.stl)
+- [Right_Spacer_tensioner_center](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_center.stl)
+
+### SP11 — Drive / bearing to collar
+
+- [Left_Drive_bearing_to_collar_spacer_R12_C1](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Drive_bearing_to_collar_spacer_R12_C1.stl)
+- [Right_Drive_bearing_to_collar_spacer_R12_C1](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Drive_bearing_to_collar_spacer_R12_C1.stl)
+
+### SP12 — Track frame / cross-member
+
+- [Left_Spacer_cross_member_-40](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_cross_member_-40.stl)
+- [Left_Spacer_cross_member_40](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_cross_member_40.stl)
+- [Right_Spacer_cross_member_-40](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_cross_member_-40.stl)
+- [Right_Spacer_cross_member_40](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_cross_member_40.stl)
+
diff --git a/docs/build/README.md b/docs/build/README.md
new file mode 100644
index 0000000..c70d036
--- /dev/null
+++ b/docs/build/README.md
@@ -0,0 +1,5 @@
+# Build guide
+
+[Open the MOSS build guide](https://www.showrobotics.ai/moss/build/) · [Written assembly cards](ASSEMBLY.md)
+
+Each step lists the printed parts, components and fasteners to prepare. Seven short clips show part identification, exploded assemblies and road-wheel fastening.
diff --git a/docs/build/RELEASE_NOTES.md b/docs/build/RELEASE_NOTES.md
new file mode 100644
index 0000000..ce25e07
--- /dev/null
+++ b/docs/build/RELEASE_NOTES.md
@@ -0,0 +1,51 @@
+# MOSS R92 — mechanical changes
+
+This is the matched current print set prepared on 16 October 2026.
+
+## Changes carried into this set
+
+| Part | Current revision | Change |
+|---|---|---|
+| Hull | R92 | Repaired the small Cytron-to-wall junction. |
+| Hull partition | R81 | Enlarged the cable opening while preserving the screw supports. |
+| Reinforcement ramps | R82 | Restored the missing outer ramps. |
+| Fan clips | R83 | Moved each opposing clip 0.5 mm inward. |
+| Heat-set insert pockets | R84 | Eleven locations now use M3 inserts with 4 mm outer diameter and 6 mm length. |
+| Audio mounts | R85 | Speaker screw spacing increased 1 mm; amplifier moved 2 mm and gained two support pillars. |
+| Rear electronics | R86 | Fans, clips and vents lowered 2 mm; Cytron and ESP supports lowered 4 mm. The approved rounded relief under the Cytron keeps the motor clearance. |
+| Computer mounts and carriers | R87 | Rear posts reduced to 9 mm diameter and shifted 5 mm toward the computer; Jetson and Pi carriers updated together. Motor-hatch groove cleared. |
+| Gemini window bezel | R89 | Removed only the two thin straight bridges; retained the curved ends and pointed tips. |
+| Motor supports | R90 | Added 8 mm upper corner radii. |
+| Assembly orientation | R91 | Restored Z-up orientation with the hull base atZ0. |
+| Upper cover | R10 split option | Cut at the arm-platform corner, with two integral dovetails assembled from above and glued. |
+| Outer track frames | R32 | Geometry unchanged; STL print orientation rotated to the front-right / rear-left diagonal. |
+| Arm plate | R22 | Geometry unchanged; exported again for this package. |
+| Bin and gripper pads | Removed | The four TPU pads are no longer supplied as printable parts. |
+| Tracks | R78 | Current 70-tooth print masters with the deeper guides. |
+
+## What is included
+
+- 113 part STL files covering hull, computer and camera alternatives, plus two optional split-joint coupons.
+- 106–109 catalogue pieces depending on the hull, cover and camera options.
+-Editable Fusion source with 99 solid parts,8 arm mesh parts and 2 track mesh masters.
+-STEP with 99 solid parts:96 manifold solids and 3 solids with internal voids.
+- 113 current part previews, an overview image, a per-part material list and standard print settings.
+- 20 assembly cards and seven clips in one visual style: a reference guide, five exploded assemblies and the corrected road-wheel fastening example.
+- All 38 printed track spacers have guide references SP01–SP12. The 18 purchased shaft collars use LK05/LK06/LK08, with dimensions in the BOM and part-reference list.
+
+## What is kept separate
+
+The split-hull alternative is rebuilt from the current R92 geometry, with six M4 fixings and the joint clearances.
+
+This mechanical package uses the existing separate electronics modules.
+
+## Validation scope
+
+All 113 part STL meshes are closed, have consistent winding and positive volume. Their geometry was reconciled with the current CAD; the 99 retained solid-part comparisons and the new split-hull and split-cover comparisons differ by less than 0.3%. Tiny export-seam repairs are recorded in `release/data/tessellation_repairs.json` and `release/data/SPLIT_HULL_R92_CHECKS.json` and do not move the intended CAD contours.
+
+The native archives passed every internal archive CRC check. The STEP contains all 99 named solid parts. These checks establish file and geometry consistency; they do not substitute for physical assembly or the planned field test.
+
+
+- Current R92 hull split into two printable halves; native Fusion sources and optional local fit coupons included.
+
+The [two-piece upper cover](SPLIT_COVER.md) uses top-entry dovetails. The [outer track frame guide](OUTER_FRAME_PRINTING.md) shows the front-right to rear-left placement.
diff --git a/docs/build/SPLIT_COVER.md b/docs/build/SPLIT_COVER.md
new file mode 100644
index 0000000..4c11c09
--- /dev/null
+++ b/docs/build/SPLIT_COVER.md
@@ -0,0 +1,20 @@
+# Two-piece upper cover
+
+Choose **Cover → Two-piece cover** in the catalogue. Use these two parts instead of the one-piece R9 cover; either cover option fits either hull option.
+
+![Top-entry dovetail joint](images/split-cover-r10.jpg)
+
+| Prepare | Quantity | Material |
+|---|---:|---|
+| [Rear cover](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Upper_Cover_R10_Rear.stl) | 1 | PLA |
+| [LiDAR extension](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Upper_Cover_R10_Lidar_Extension.stl) | 1 | PLA |
+| Epoxy from the two-part kit | As needed | — |
+
+1. Print both parts in the supplied orientation, with the standard/default profile and 15% gyroid infill.
+2. Test-fit the joint off the rover. Keep the rear cover still and lower the LiDAR extension **from above** into both sockets.
+3. Apply a thin layer of two-part epoxy to the mating faces. Seat the two dovetails fully, align the outside surfaces and hold until the epoxy has cured.
+4. Fit the joined cover with the existing four M3 × 10 countersunk screws. No extra joint screws are required.
+
+The split follows the corner of the arm platform. In print orientation, the rear section measures **190.9 × 47.2 × 187.9 mm** and the extension **52.8 × 35.7 × 106.1 mm**. Each fits inside a 256 mm build volume. The joint has 0.25 mm side clearance, 0.30 mm bottom clearance and a 0.20 mm seam gap.
+
+[Native Fusion assembly](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_Upper_Cover_R10_Split_Assembly.f3d).
diff --git a/docs/build/SPLIT_HULL.md b/docs/build/SPLIT_HULL.md
new file mode 100644
index 0000000..b29131a
--- /dev/null
+++ b/docs/build/SPLIT_HULL.md
@@ -0,0 +1,28 @@
+# Two-piece hull — R92
+
+Use these two pieces instead of the one-piece hull. Both include the current R92 changes.
+
+| Prepare | Quantity |
+|---|---:|
+| Rear hull — motors and computer | 1 |
+| Front hull — battery and camera | 1 |
+| M4 × 15 socket-head screw | 6 |
+| M4 hex nut, 7 mm across flats | 6 |
+| M4 washer, outside diameter 9 mm, thickness 0.8 mm | 6 |
+| Epoxy from the two-part kit | As needed |
+
+1. Print both halves in PETG, flat exterior base down. Use standard/default settings and 15% gyroid infill.
+2. Dry-fit both halves on a flat surface, then separate them.
+3. Apply a thin layer of two-part epoxy to the mating faces and engage the two locating pins.
+4. Seat the six nuts in the pockets on the battery side.
+5. Insert the six screws and washers from the motor/computer side. Tighten progressively.
+6. Let the epoxy cure before installing the electronics and battery.
+
+The middle track mounts stay entirely on the motor/computer half. The arm-platform insert bosses stay entirely on the front half.
+
+The rear piece measures 203 × 237 × 66 mm; the front piece measures 144.5 × 211 × 66 mm. The joint retains 0.25 mm sliding clearance and 0.30 mm radial pin clearance. The two small fit coupons reproduce one pin and one bolt station if you want to try the fit first.
+
+[Rear STL](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Hull_R92_Split_Rear_Motor_Computer.stl) · [Front STL](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Hull_R92_Split_Front_Battery_Camera.stl) · [Fusion assembly](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_Hull_R92_Split_Assembly.f3d)
+
+Optional: [rear fit coupon](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Hull_R92_Split_Fit_Coupon_Rear.stl) · [front fit coupon](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Hull_R92_Split_Fit_Coupon_Front.stl).
+
diff --git a/docs/build/assembly_references.json b/docs/build/assembly_references.json
new file mode 100644
index 0000000..a7facad
--- /dev/null
+++ b/docs/build/assembly_references.json
@@ -0,0 +1,491 @@
+{
+ "note": "Guide identifiers, not manufacturer part numbers. SP01\u2013SP08 correspond to the existing dot IDs; SP09\u2013SP12 are guide-only codes and are not engraved. Collar dimensions describe the current CAD envelopes; compare the purchased parts before ordering.",
+ "references": [
+ {
+ "ref": "SP01",
+ "name": "Road wheel / inner",
+ "length_mm": 7.5,
+ "bore_mm": 5.3,
+ "od_mm": 7.6,
+ "dots": 1,
+ "dot_pattern": [
+ [
+ 0,
+ 0
+ ]
+ ],
+ "quantity": 6,
+ "kind": "printed",
+ "files": [
+ {
+ "part_id": "Left_Spacer_road_wheel_-70_inner_ID01_R24",
+ "file": "../release/STL/Common/Left_Spacer_road_wheel_-70_inner_ID01_R24.stl"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_0_inner_ID01_R24",
+ "file": "../release/STL/Common/Left_Spacer_road_wheel_0_inner_ID01_R24.stl"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_70_inner_ID01_R24",
+ "file": "../release/STL/Common/Left_Spacer_road_wheel_70_inner_ID01_R24.stl"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_-70_inner_ID01_R24",
+ "file": "../release/STL/Common/Right_Spacer_road_wheel_-70_inner_ID01_R24.stl"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_0_inner_ID01_R24",
+ "file": "../release/STL/Common/Right_Spacer_road_wheel_0_inner_ID01_R24.stl"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_70_inner_ID01_R24",
+ "file": "../release/STL/Common/Right_Spacer_road_wheel_70_inner_ID01_R24.stl"
+ }
+ ]
+ },
+ {
+ "ref": "SP02",
+ "name": "Road wheel / outer",
+ "length_mm": 5.5,
+ "bore_mm": 5.3,
+ "od_mm": 7.6,
+ "dots": 2,
+ "dot_pattern": [
+ [
+ -1.05,
+ 0
+ ],
+ [
+ 1.05,
+ 0
+ ]
+ ],
+ "quantity": 6,
+ "kind": "printed",
+ "files": [
+ {
+ "part_id": "Left_Spacer_road_wheel_-70_outer_ID02_R24",
+ "file": "../release/STL/Common/Left_Spacer_road_wheel_-70_outer_ID02_R24.stl"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_0_outer_ID02_R24",
+ "file": "../release/STL/Common/Left_Spacer_road_wheel_0_outer_ID02_R24.stl"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_70_outer_ID02_R24",
+ "file": "../release/STL/Common/Left_Spacer_road_wheel_70_outer_ID02_R24.stl"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_-70_outer_ID02_R24",
+ "file": "../release/STL/Common/Right_Spacer_road_wheel_-70_outer_ID02_R24.stl"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_0_outer_ID02_R24",
+ "file": "../release/STL/Common/Right_Spacer_road_wheel_0_outer_ID02_R24.stl"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_70_outer_ID02_R24",
+ "file": "../release/STL/Common/Right_Spacer_road_wheel_70_outer_ID02_R24.stl"
+ }
+ ]
+ },
+ {
+ "ref": "SP03",
+ "name": "Drive / motor side",
+ "length_mm": 7.6,
+ "bore_mm": 6.4,
+ "od_mm": 9.0,
+ "dots": 3,
+ "dot_pattern": [
+ [
+ -2.1,
+ 0
+ ],
+ [
+ 0,
+ 0
+ ],
+ [
+ 2.1,
+ 0
+ ]
+ ],
+ "quantity": 2,
+ "kind": "printed",
+ "files": [
+ {
+ "part_id": "Left_Spacer_drive_inner_ID03_R24",
+ "file": "../release/STL/Common/Left_Spacer_drive_inner_ID03_R24.stl"
+ },
+ {
+ "part_id": "Right_Spacer_drive_inner_ID03_R24",
+ "file": "../release/STL/Common/Right_Spacer_drive_inner_ID03_R24.stl"
+ }
+ ]
+ },
+ {
+ "ref": "SP04",
+ "name": "Drive / outer",
+ "length_mm": 12.6,
+ "bore_mm": 6.4,
+ "od_mm": 9.0,
+ "dots": 4,
+ "dot_pattern": [
+ [
+ -1.05,
+ -1.05
+ ],
+ [
+ -1.05,
+ 1.05
+ ],
+ [
+ 1.05,
+ -1.05
+ ],
+ [
+ 1.05,
+ 1.05
+ ]
+ ],
+ "quantity": 2,
+ "kind": "printed",
+ "files": [
+ {
+ "part_id": "Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24",
+ "file": "../release/STL/Common/Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl"
+ },
+ {
+ "part_id": "Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24",
+ "file": "../release/STL/Common/Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl"
+ }
+ ]
+ },
+ {
+ "ref": "SP05",
+ "name": "Idler / inner",
+ "length_mm": 15.4,
+ "bore_mm": 8.4,
+ "od_mm": 12.0,
+ "dots": 5,
+ "dot_pattern": [
+ [
+ -2.1,
+ -2.1
+ ],
+ [
+ -2.1,
+ 2.1
+ ],
+ [
+ 2.1,
+ -2.1
+ ],
+ [
+ 2.1,
+ 2.1
+ ],
+ [
+ 0,
+ 0
+ ]
+ ],
+ "quantity": 2,
+ "kind": "printed",
+ "files": [
+ {
+ "part_id": "Left_Spacer_tensioner_inner_ID05_R24",
+ "file": "../release/STL/Common/Left_Spacer_tensioner_inner_ID05_R24.stl"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_inner_ID05_R24",
+ "file": "../release/STL/Common/Right_Spacer_tensioner_inner_ID05_R24.stl"
+ }
+ ]
+ },
+ {
+ "ref": "SP06",
+ "name": "Idler / outer",
+ "length_mm": 13.4,
+ "bore_mm": 8.4,
+ "od_mm": 12.0,
+ "dots": 6,
+ "dot_pattern": [
+ [
+ -2.1,
+ -2.1
+ ],
+ [
+ -2.1,
+ 0
+ ],
+ [
+ -2.1,
+ 2.1
+ ],
+ [
+ 2.1,
+ -2.1
+ ],
+ [
+ 2.1,
+ 0
+ ],
+ [
+ 2.1,
+ 2.1
+ ]
+ ],
+ "quantity": 2,
+ "kind": "printed",
+ "files": [
+ {
+ "part_id": "Left_Spacer_tensioner_outer_ID06_R24",
+ "file": "../release/STL/Common/Left_Spacer_tensioner_outer_ID06_R24.stl"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_outer_ID06_R24",
+ "file": "../release/STL/Common/Right_Spacer_tensioner_outer_ID06_R24.stl"
+ }
+ ]
+ },
+ {
+ "ref": "SP07",
+ "name": "Idler / inner retainer",
+ "length_mm": 6.3,
+ "bore_mm": 8.4,
+ "od_mm": 12.0,
+ "dots": 7,
+ "dot_pattern": [
+ [
+ -1.8,
+ -1.8
+ ],
+ [
+ -1.8,
+ 0
+ ],
+ [
+ -1.8,
+ 1.8
+ ],
+ [
+ 1.8,
+ -1.8
+ ],
+ [
+ 1.8,
+ 0
+ ],
+ [
+ 1.8,
+ 1.8
+ ],
+ [
+ 0,
+ 0
+ ]
+ ],
+ "quantity": 2,
+ "kind": "printed",
+ "files": [
+ {
+ "part_id": "Left_Spacer_tensioner_retainer_inner_ID07_R24",
+ "file": "../release/STL/Common/Left_Spacer_tensioner_retainer_inner_ID07_R24.stl"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_retainer_inner_ID07_R24",
+ "file": "../release/STL/Common/Right_Spacer_tensioner_retainer_inner_ID07_R24.stl"
+ }
+ ]
+ },
+ {
+ "ref": "SP08",
+ "name": "Idler / outer retainer",
+ "length_mm": 6.0,
+ "bore_mm": 8.4,
+ "od_mm": 12.0,
+ "dots": 8,
+ "dot_pattern": [
+ [
+ -1.8,
+ -1.8
+ ],
+ [
+ -1.8,
+ 0
+ ],
+ [
+ -1.8,
+ 1.8
+ ],
+ [
+ 0,
+ -1.8
+ ],
+ [
+ 0,
+ 1.8
+ ],
+ [
+ 1.8,
+ -1.8
+ ],
+ [
+ 1.8,
+ 0
+ ],
+ [
+ 1.8,
+ 1.8
+ ]
+ ],
+ "quantity": 2,
+ "kind": "printed",
+ "files": [
+ {
+ "part_id": "Left_Spacer_tensioner_retainer_outer_ID08_R24",
+ "file": "../release/STL/Common/Left_Spacer_tensioner_retainer_outer_ID08_R24.stl"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_retainer_outer_ID08_R24",
+ "file": "../release/STL/Common/Right_Spacer_tensioner_retainer_outer_ID08_R24.stl"
+ }
+ ]
+ },
+ {
+ "ref": "SP09",
+ "name": "Road wheel / centre",
+ "length_mm": 18,
+ "bore_mm": 5.3,
+ "od_mm": 7.6,
+ "dots": null,
+ "quantity": 6,
+ "kind": "printed",
+ "files": [
+ {
+ "part_id": "Left_Spacer_road_wheel_-70_center",
+ "file": "../release/STL/Common/Left_Spacer_road_wheel_-70_center.stl"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_0_center",
+ "file": "../release/STL/Common/Left_Spacer_road_wheel_0_center.stl"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_70_center",
+ "file": "../release/STL/Common/Left_Spacer_road_wheel_70_center.stl"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_-70_center",
+ "file": "../release/STL/Common/Right_Spacer_road_wheel_-70_center.stl"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_0_center",
+ "file": "../release/STL/Common/Right_Spacer_road_wheel_0_center.stl"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_70_center",
+ "file": "../release/STL/Common/Right_Spacer_road_wheel_70_center.stl"
+ }
+ ]
+ },
+ {
+ "ref": "SP10",
+ "name": "Idler / centre",
+ "length_mm": 3.8,
+ "bore_mm": 8.4,
+ "od_mm": 12,
+ "dots": null,
+ "quantity": 2,
+ "kind": "printed",
+ "files": [
+ {
+ "part_id": "Left_Spacer_tensioner_center",
+ "file": "../release/STL/Common/Left_Spacer_tensioner_center.stl"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_center",
+ "file": "../release/STL/Common/Right_Spacer_tensioner_center.stl"
+ }
+ ]
+ },
+ {
+ "ref": "SP11",
+ "name": "Drive / bearing to collar",
+ "length_mm": 3.5,
+ "bore_mm": 6.4,
+ "od_mm": 9,
+ "dots": null,
+ "quantity": 2,
+ "kind": "printed",
+ "files": [
+ {
+ "part_id": "Left_Drive_bearing_to_collar_spacer_R12_C1",
+ "file": "../release/STL/Common/Left_Drive_bearing_to_collar_spacer_R12_C1.stl"
+ },
+ {
+ "part_id": "Right_Drive_bearing_to_collar_spacer_R12_C1",
+ "file": "../release/STL/Common/Right_Drive_bearing_to_collar_spacer_R12_C1.stl"
+ }
+ ]
+ },
+ {
+ "ref": "SP12",
+ "name": "Track frame / cross-member",
+ "length_mm": 41,
+ "bore_mm": 4.4,
+ "od_mm": 14,
+ "dots": null,
+ "quantity": 4,
+ "kind": "printed",
+ "files": [
+ {
+ "part_id": "Left_Spacer_cross_member_-40",
+ "file": "../release/STL/Common/Left_Spacer_cross_member_-40.stl"
+ },
+ {
+ "part_id": "Left_Spacer_cross_member_40",
+ "file": "../release/STL/Common/Left_Spacer_cross_member_40.stl"
+ },
+ {
+ "part_id": "Right_Spacer_cross_member_-40",
+ "file": "../release/STL/Common/Right_Spacer_cross_member_-40.stl"
+ },
+ {
+ "part_id": "Right_Spacer_cross_member_40",
+ "file": "../release/STL/Common/Right_Spacer_cross_member_40.stl"
+ }
+ ]
+ },
+ {
+ "ref": "LK05",
+ "name": "Shaft collar / lock ring",
+ "length_mm": 5,
+ "bore_mm": 5,
+ "od_mm": 10,
+ "quantity": 12,
+ "kind": "purchased",
+ "supplier_part_number": null
+ },
+ {
+ "ref": "LK06",
+ "name": "Shaft collar / lock ring",
+ "length_mm": 5,
+ "bore_mm": 6,
+ "od_mm": 11,
+ "quantity": 2,
+ "kind": "purchased",
+ "supplier_part_number": null
+ },
+ {
+ "ref": "LK08",
+ "name": "Shaft collar / lock ring",
+ "length_mm": 8,
+ "bore_mm": 8,
+ "od_mm": 16,
+ "quantity": 4,
+ "kind": "purchased",
+ "supplier_part_number": null
+ }
+ ]
+}
diff --git a/docs/build/assembly_steps.json b/docs/build/assembly_steps.json
new file mode 100644
index 0000000..56a5630
--- /dev/null
+++ b/docs/build/assembly_steps.json
@@ -0,0 +1,1414 @@
+{
+ "parts_counted_per_step": "Quantities are for one complete rover unless the action says per wheel. Alternative options are explicitly labelled.",
+ "steps": [
+ {
+ "id": "01",
+ "title": "Choose the hull and fit the inserts",
+ "printed_parts": [
+ {
+ "part_id": "Hull_R92",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Hull_R92.stl",
+ "display_name": "One-piece hull (one-piece option)"
+ },
+ {
+ "part_id": "Lidar_Base_R84",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Lidar_Base_R84.stl"
+ },
+ {
+ "part_id": "Hull_R92_Split_Rear_Motor_Computer",
+ "display_name": "Rear hull \u2014 motors and computer",
+ "file": "STL/Options/Hull_R92_Split_Rear_Motor_Computer.stl",
+ "material": "PETG",
+ "quantity": 1
+ },
+ {
+ "part_id": "Hull_R92_Split_Front_Battery_Camera",
+ "display_name": "Front hull \u2014 battery and camera",
+ "file": "STL/Options/Hull_R92_Split_Front_Battery_Camera.stl",
+ "material": "PETG",
+ "quantity": 1
+ }
+ ],
+ "components": [
+ {
+ "reference": "Epoxy from the two-part kit, for the hull joint",
+ "quantity": "As needed",
+ "scope": "HULL_SPLIT"
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M3 heat-set insert, OD4 mm, length 6 mm",
+ "quantity": 11
+ },
+ {
+ "reference": "Split hull only: M4 \u00d7 15 socket-head screw",
+ "quantity": 6,
+ "scope": "HULL_SPLIT"
+ },
+ {
+ "reference": "Split hull only: M4 hex nut, 7 mm across flats",
+ "quantity": 6,
+ "scope": "HULL_SPLIT"
+ },
+ {
+ "reference": "Split hull only: M4 washer, \u00d89 \u00d7 0.8 mm",
+ "quantity": 6,
+ "scope": "HULL_SPLIT"
+ }
+ ],
+ "actions": [
+ "Choose the one-piece hull or both split halves. For the split hull, dry-fit both halves first, then apply a thin layer of two-part epoxy to the mating faces. Engage the locating pins, seat six nuts from the battery side, and fit six M4 \u00d7 15 screws with washers from the motor/computer side. Tighten progressively and let the epoxy cure before installing electronics or the battery.",
+ "Use a soldering iron to fit the inserts: place each insert over its hole, heat it with the iron tip, then gently press it straight into the plastic. Fit four inserts for the cover, four for the arm plate and two for the LiDAR base in the hull.",
+ "Use the same soldering-iron method to fit the remaining insert in the LiDAR base for the carriage lock. Keep the threads clear and let all inserts cool before fitting screws."
+ ],
+ "video": null,
+ "image": "images/split-hull-r92.jpg",
+ "image_alt": "Current R92 split hull, motor/computer half and battery/camera half"
+ },
+ {
+ "id": "02",
+ "title": "Build the six road wheels",
+ "printed_parts": [
+ {
+ "part_id": "Left_625_road_wheel_-70_inner_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_625_road_wheel_-70_inner_half_R13.stl"
+ },
+ {
+ "part_id": "Left_625_road_wheel_-70_outer_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_625_road_wheel_-70_outer_half_R13.stl"
+ },
+ {
+ "part_id": "Left_625_road_wheel_70_inner_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_625_road_wheel_70_inner_half_R13.stl"
+ },
+ {
+ "part_id": "Left_625_road_wheel_70_outer_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_625_road_wheel_70_outer_half_R13.stl"
+ },
+ {
+ "part_id": "Right_625_road_wheel_-70_inner_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_625_road_wheel_-70_inner_half_R13.stl"
+ },
+ {
+ "part_id": "Right_625_road_wheel_-70_outer_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_625_road_wheel_-70_outer_half_R13.stl"
+ },
+ {
+ "part_id": "Right_625_road_wheel_70_inner_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_625_road_wheel_70_inner_half_R13.stl"
+ },
+ {
+ "part_id": "Right_625_road_wheel_70_outer_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_625_road_wheel_70_outer_half_R13.stl"
+ },
+ {
+ "part_id": "Left_625_road_wheel_0_inner_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_625_road_wheel_0_inner_half_R13.stl"
+ },
+ {
+ "part_id": "Left_625_road_wheel_0_outer_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_625_road_wheel_0_outer_half_R13.stl"
+ },
+ {
+ "part_id": "Right_625_road_wheel_0_inner_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_625_road_wheel_0_inner_half_R13.stl"
+ },
+ {
+ "part_id": "Right_625_road_wheel_0_outer_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_625_road_wheel_0_outer_half_R13.stl"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_-70_center",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_road_wheel_-70_center.stl",
+ "assembly_ref": "SP09"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_0_center",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_road_wheel_0_center.stl",
+ "assembly_ref": "SP09"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_70_center",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_road_wheel_70_center.stl",
+ "assembly_ref": "SP09"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_-70_center",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_road_wheel_-70_center.stl",
+ "assembly_ref": "SP09"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_0_center",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_road_wheel_0_center.stl",
+ "assembly_ref": "SP09"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_70_center",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_road_wheel_70_center.stl",
+ "assembly_ref": "SP09"
+ }
+ ],
+ "components": [
+ {
+ "reference": "625 bearing",
+ "quantity": 12
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M3 \u00d7 35 socket-head screw",
+ "quantity": 18
+ },
+ {
+ "reference": "M3 hex nut",
+ "quantity": 18
+ }
+ ],
+ "actions": [
+ "For each wheel, prepare two printed halves, one SP09 centre spacer, two 625 bearings, three M3 \u00d7 35 screws and three M3 nuts.",
+ "Insert each bearing through the open mating face of its wheel half. Do not push it through the smaller outside opening.",
+ "Seat the three nuts in the inner half, position SP09 between the bearings, close the wheel halves, then insert the three screws from the outer face. Repeat six times."
+ ],
+ "video": "videos/06-road-wheel-screws.mp4"
+ },
+ {
+ "id": "03",
+ "title": "Build the two drive wheels",
+ "printed_parts": [
+ {
+ "part_id": "Left_HEX12_drive_wheel_inner_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_HEX12_drive_wheel_inner_half_R13.stl"
+ },
+ {
+ "part_id": "Left_HEX12_drive_wheel_outer_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_HEX12_drive_wheel_outer_half_R13.stl"
+ },
+ {
+ "part_id": "Right_HEX12_drive_wheel_inner_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_HEX12_drive_wheel_inner_half_R13.stl"
+ },
+ {
+ "part_id": "Right_HEX12_drive_wheel_outer_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_HEX12_drive_wheel_outer_half_R13.stl"
+ }
+ ],
+ "components": [
+ {
+ "reference": "HEX12 metal hub, 6 mm bore, 18 mm length",
+ "quantity": 2
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M3 \u00d7 20 socket-head screw",
+ "quantity": 6
+ },
+ {
+ "reference": "M3 hex nut",
+ "quantity": 6
+ }
+ ],
+ "actions": [
+ "Match the locating feature on each pair of halves.",
+ "Close each wheel with three M3 \u00d7 20 screws and three M3 nuts. Keep the HEX12 seat clear."
+ ],
+ "video": null
+ },
+ {
+ "id": "04",
+ "title": "Build the two idler wheels",
+ "printed_parts": [
+ {
+ "part_id": "Left_22T_idler_wheel_inner_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_22T_idler_wheel_inner_half_R13.stl"
+ },
+ {
+ "part_id": "Left_22T_idler_wheel_outer_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_22T_idler_wheel_outer_half_R13.stl"
+ },
+ {
+ "part_id": "Right_22T_idler_wheel_inner_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_22T_idler_wheel_inner_half_R13.stl"
+ },
+ {
+ "part_id": "Right_22T_idler_wheel_outer_half_R13",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_22T_idler_wheel_outer_half_R13.stl"
+ },
+ {
+ "part_id": "Left_Spacer_tensioner_center",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_tensioner_center.stl",
+ "assembly_ref": "SP10"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_center",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_tensioner_center.stl",
+ "assembly_ref": "SP10"
+ }
+ ],
+ "components": [
+ {
+ "reference": "608 bearing",
+ "quantity": 4
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M3 \u00d7 25 socket-head screw",
+ "quantity": 6
+ },
+ {
+ "reference": "M3 hex nut",
+ "quantity": 6
+ }
+ ],
+ "actions": [
+ "For each idler, seat two 608 bearings with SP10 (centre spacer) between them.",
+ "Close the two halves with three M3 \u00d7 25 screws and three M3 nuts. Repeat for the other side."
+ ],
+ "video": null
+ },
+ {
+ "id": "05",
+ "title": "Fit the motors and inner bearing retainers",
+ "printed_parts": [
+ {
+ "part_id": "Motor_Mount_Left_R90",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Motor_Mount_Left_R90.stl"
+ },
+ {
+ "part_id": "Motor_Mount_Right_R90",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Motor_Mount_Right_R90.stl"
+ },
+ {
+ "part_id": "05_Left_bearing_retainer",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/05_Left_bearing_retainer.stl"
+ },
+ {
+ "part_id": "06_Right_bearing_retainer",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/06_Right_bearing_retainer.stl"
+ }
+ ],
+ "components": [
+ {
+ "reference": "JGB37-520 motor, 12 V, 90:1, 110 rpm, Hall encoder",
+ "quantity": 2
+ },
+ {
+ "reference": "626 bearing, inner",
+ "quantity": 2
+ },
+ {
+ "reference": "Rigid coupling, 6 mm to6 mm",
+ "quantity": 2
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M4 \u00d7 20 socket-head screw",
+ "quantity": 8
+ },
+ {
+ "reference": "M4 hex nut",
+ "quantity": 8
+ },
+ {
+ "reference": "M3 \u00d7 8 socket-head screw",
+ "quantity": 12
+ }
+ ],
+ "actions": [
+ "Use three M3 \u00d7 8 screws per motor, without washers. The other six M3 \u00d7 8 screws secure the two bearing retainers.",
+ "Put four M4 nuts into each motor-support nut pocket and secure each support to the hull with four M4 \u00d7 20 screws.",
+ "Fit the inner bearing retainers with three M3 \u00d7 8 screws per side."
+ ],
+ "video": null
+ },
+ {
+ "id": "06",
+ "title": "Fit the inner track frames",
+ "printed_parts": [
+ {
+ "part_id": "Left_inner_track_frame_R12_C2",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_inner_track_frame_R12_C2.stl"
+ },
+ {
+ "part_id": "Right_inner_track_frame_R12_C2",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_inner_track_frame_R12_C2.stl"
+ }
+ ],
+ "components": [],
+ "fasteners": [
+ {
+ "reference": "M4 \u00d7 15 socket-head screw",
+ "quantity": 6
+ },
+ {
+ "reference": "M4 hex nut",
+ "quantity": 6
+ }
+ ],
+ "actions": [
+ "Fit each inner frame directly against the hull.",
+ "Use three M4 \u00d7 15 screws and three M4 nuts per side."
+ ],
+ "video": null
+ },
+ {
+ "id": "07",
+ "title": "Fit road-wheel axles and spacer pairs",
+ "printed_parts": [
+ {
+ "part_id": "Left_Spacer_road_wheel_-70_inner_ID01_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_road_wheel_-70_inner_ID01_R24.stl",
+ "assembly_ref": "SP01"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_0_inner_ID01_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_road_wheel_0_inner_ID01_R24.stl",
+ "assembly_ref": "SP01"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_70_inner_ID01_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_road_wheel_70_inner_ID01_R24.stl",
+ "assembly_ref": "SP01"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_-70_inner_ID01_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_road_wheel_-70_inner_ID01_R24.stl",
+ "assembly_ref": "SP01"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_0_inner_ID01_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_road_wheel_0_inner_ID01_R24.stl",
+ "assembly_ref": "SP01"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_70_inner_ID01_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_road_wheel_70_inner_ID01_R24.stl",
+ "assembly_ref": "SP01"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_-70_outer_ID02_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_road_wheel_-70_outer_ID02_R24.stl",
+ "assembly_ref": "SP02"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_0_outer_ID02_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_road_wheel_0_outer_ID02_R24.stl",
+ "assembly_ref": "SP02"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_70_outer_ID02_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_road_wheel_70_outer_ID02_R24.stl",
+ "assembly_ref": "SP02"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_-70_outer_ID02_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_road_wheel_-70_outer_ID02_R24.stl",
+ "assembly_ref": "SP02"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_0_outer_ID02_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_road_wheel_0_outer_ID02_R24.stl",
+ "assembly_ref": "SP02"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_70_outer_ID02_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_road_wheel_70_outer_ID02_R24.stl",
+ "assembly_ref": "SP02"
+ }
+ ],
+ "components": [
+ {
+ "reference": "Smooth steel axle, 5 x70 mm finished length",
+ "quantity": 6
+ },
+ {
+ "reference": "LK05 \u2014 shaft collar: 5 mm bore, 10 mm outside diameter, 5 mm long",
+ "quantity": 12
+ }
+ ],
+ "fasteners": [],
+ "actions": [
+ "Use SP01 (1 dot, 7.5 mm) on the inside and SP02 (2 dots, 5.5 mm) on the outside of every road wheel. SP09 (18 mm, no dots) sits between its bearings.",
+ "Retain each axle with two LK05 collars (5 mm bore). Repeat for all six wheels and check free rotation."
+ ],
+ "video": "videos/02-road-wheel-spacers.mp4"
+ },
+ {
+ "id": "08",
+ "title": "Fit the drive axles and outer bearing covers",
+ "printed_parts": [
+ {
+ "part_id": "Left_Spacer_drive_inner_ID03_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_drive_inner_ID03_R24.stl",
+ "assembly_ref": "SP03"
+ },
+ {
+ "part_id": "Right_Spacer_drive_inner_ID03_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_drive_inner_ID03_R24.stl",
+ "assembly_ref": "SP03"
+ },
+ {
+ "part_id": "Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl",
+ "assembly_ref": "SP04"
+ },
+ {
+ "part_id": "Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl",
+ "assembly_ref": "SP04"
+ },
+ {
+ "part_id": "Left_Cover_motor_bearing",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Cover_motor_bearing.stl"
+ },
+ {
+ "part_id": "Right_Cover_motor_bearing",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Cover_motor_bearing.stl"
+ },
+ {
+ "part_id": "Left_Drive_bearing_to_collar_spacer_R12_C1",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Drive_bearing_to_collar_spacer_R12_C1.stl",
+ "assembly_ref": "SP11"
+ },
+ {
+ "part_id": "Right_Drive_bearing_to_collar_spacer_R12_C1",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Drive_bearing_to_collar_spacer_R12_C1.stl",
+ "assembly_ref": "SP11"
+ }
+ ],
+ "components": [
+ {
+ "reference": "Smooth steel axle, 6 x77 mm finished length",
+ "quantity": 2
+ },
+ {
+ "reference": "626 bearing, outer",
+ "quantity": 2
+ },
+ {
+ "reference": "LK06 \u2014 shaft collar: 6 mm bore, 11 mm outside diameter, 5 mm long",
+ "quantity": 2
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M3 \u00d7 15 socket-head screw",
+ "quantity": 6
+ },
+ {
+ "reference": "M3 hex nut",
+ "quantity": 6
+ }
+ ],
+ "actions": [
+ "Use SP03 (3 dots, 7.6 mm) on the motor side and SP04 (4 dots, 12.6 mm) on the outer side of the drive wheel.",
+ "Put SP11 (3.5 mm, no dots) between the outer 626 bearing and LK06 (6 mm bore). Secure each bearing cover with three M3 \u00d7 15 screws and nuts."
+ ],
+ "video": "videos/03-drive-wheel-spacers.mp4"
+ },
+ {
+ "id": "09",
+ "title": "Fit the idler slides and tensioners",
+ "printed_parts": [
+ {
+ "part_id": "Left_inner_tensioner_cover_R12_C2",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_inner_tensioner_cover_R12_C2.stl"
+ },
+ {
+ "part_id": "Right_inner_tensioner_cover_R12_C2",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_inner_tensioner_cover_R12_C2.stl"
+ },
+ {
+ "part_id": "Left_Spacer_tensioner_inner_ID05_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_tensioner_inner_ID05_R24.stl",
+ "assembly_ref": "SP05"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_inner_ID05_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_tensioner_inner_ID05_R24.stl",
+ "assembly_ref": "SP05"
+ },
+ {
+ "part_id": "Left_Spacer_tensioner_outer_ID06_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_tensioner_outer_ID06_R24.stl",
+ "assembly_ref": "SP06"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_outer_ID06_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_tensioner_outer_ID06_R24.stl",
+ "assembly_ref": "SP06"
+ },
+ {
+ "part_id": "Left_Cover_tensioner_outer",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Cover_tensioner_outer.stl"
+ },
+ {
+ "part_id": "Right_Cover_tensioner_outer",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Cover_tensioner_outer.stl"
+ },
+ {
+ "part_id": "Left_Slider_outer",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Slider_outer.stl"
+ },
+ {
+ "part_id": "Right_Slider_outer",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Slider_outer.stl"
+ },
+ {
+ "part_id": "Left_inner_tensioner_slider",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_inner_tensioner_slider.stl"
+ },
+ {
+ "part_id": "Right_inner_tensioner_slider",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_inner_tensioner_slider.stl"
+ },
+ {
+ "part_id": "Left_Spacer_tensioner_retainer_inner_ID07_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_tensioner_retainer_inner_ID07_R24.stl",
+ "assembly_ref": "SP07"
+ },
+ {
+ "part_id": "Left_Spacer_tensioner_retainer_outer_ID08_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_tensioner_retainer_outer_ID08_R24.stl",
+ "assembly_ref": "SP08"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_retainer_inner_ID07_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_tensioner_retainer_inner_ID07_R24.stl",
+ "assembly_ref": "SP07"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_retainer_outer_ID08_R24",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_tensioner_retainer_outer_ID08_R24.stl",
+ "assembly_ref": "SP08"
+ }
+ ],
+ "components": [
+ {
+ "reference": "Smooth steel axle, 8 x87 mm finished length",
+ "quantity": 2
+ },
+ {
+ "reference": "LK08 \u2014 shaft collar: 8 mm bore, 16 mm outside diameter, 8 mm long",
+ "quantity": 4
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M3 \u00d7 15 socket-head screw",
+ "quantity": 16
+ },
+ {
+ "reference": "M3 hex nut",
+ "quantity": 16
+ },
+ {
+ "reference": "M4 \u00d7 35 socket-head screw",
+ "quantity": 4
+ },
+ {
+ "reference": "M4 hex nut",
+ "quantity": 8
+ },
+ {
+ "reference": "M4 washer",
+ "quantity": 4
+ }
+ ],
+ "actions": [
+ "Inside to outside: LK08, SP07, inner slider, SP05, idler wheel with SP10 between its bearings, SP06, outer slider, SP08, LK08. Use two LK08 collars (8 mm bore) per axle.",
+ "Fit each tensioner cover with four M3 \u00d7 15 screws and nuts. Use an M4 \u00d7 35 adjuster with its washer and two nuts at each of the four tensioners."
+ ],
+ "video": "videos/04-idler-tensioner-spacers.mp4"
+ },
+ {
+ "id": "10",
+ "title": "Close the track frames",
+ "printed_parts": [
+ {
+ "part_id": "Left_Outer_Track_Frame_R32",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Outer_Track_Frame_R32.stl"
+ },
+ {
+ "part_id": "Right_Outer_Track_Frame_R32",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Outer_Track_Frame_R32.stl"
+ },
+ {
+ "part_id": "Left_Spacer_cross_member_-40",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_cross_member_-40.stl",
+ "assembly_ref": "SP12"
+ },
+ {
+ "part_id": "Left_Spacer_cross_member_40",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Left_Spacer_cross_member_40.stl",
+ "assembly_ref": "SP12"
+ },
+ {
+ "part_id": "Right_Spacer_cross_member_-40",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_cross_member_-40.stl",
+ "assembly_ref": "SP12"
+ },
+ {
+ "part_id": "Right_Spacer_cross_member_40",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Right_Spacer_cross_member_40.stl",
+ "assembly_ref": "SP12"
+ }
+ ],
+ "components": [],
+ "fasteners": [
+ {
+ "reference": "M4 \u00d7 60 socket-head screw",
+ "quantity": 4
+ },
+ {
+ "reference": "M4 hex nut",
+ "quantity": 4
+ },
+ {
+ "reference": "M4 washer",
+ "quantity": 4
+ }
+ ],
+ "actions": [
+ "Put the two SP12 cross-member spacers (41 mm, no dots) in each side assembly.",
+ "Fit the outer frame using two M4 \u00d7 60 screws, washers and nuts per side."
+ ],
+ "video": "videos/05-track-side-reassembly.mp4"
+ },
+ {
+ "id": "11",
+ "title": "Fit the tracks",
+ "printed_parts": [
+ {
+ "part_id": "Left_Track_R78_70_Teeth",
+ "quantity": 1,
+ "material": "TPU",
+ "file": "STL/Common/Left_Track_R78_70_Teeth.stl"
+ },
+ {
+ "part_id": "Right_Track_R78_70_Teeth",
+ "quantity": 1,
+ "material": "TPU",
+ "file": "STL/Common/Right_Track_R78_70_Teeth.stl"
+ }
+ ],
+ "components": [],
+ "fasteners": [],
+ "actions": [
+ "Use the 70-tooth track print masters supplied in this package.",
+ "Seat the central guides in the wheel grooves. Adjust both ends evenly and turn each track by hand."
+ ],
+ "video": null
+ },
+ {
+ "id": "12",
+ "title": "Fit the driver and controller",
+ "printed_parts": [],
+ "components": [
+ {
+ "reference": "Cytron MDD10A Rev2 dual motor driver",
+ "quantity": 1
+ },
+ {
+ "reference": "Adafruit QT Py ESP32-S3, 5426",
+ "quantity": 1
+ },
+ {
+ "reference": "Adafruit Terminal Block BFF, 6495",
+ "quantity": 1
+ },
+ {
+ "reference": "Adafruit INA219 STEMMA QT, 904",
+ "quantity": 1
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M3 \u00d7 6 socket-head screw",
+ "quantity": 4
+ },
+ {
+ "reference": "M2 \u00d7 6 screw, non-countersunk",
+ "quantity": 6
+ },
+ {
+ "reference": "M2 washer, 0.3 mm thick",
+ "quantity": 6
+ }
+ ],
+ "actions": [
+ "Secure the MDD10A with four M3 \u00d7 6 screws.",
+ "Use four M2 \u00d7 6 screws and 0.3 mm washers for the BFF, and two of each for the INA219."
+ ],
+ "video": null
+ },
+ {
+ "id": "13",
+ "title": "Fit the speaker and amplifier",
+ "printed_parts": [],
+ "components": [
+ {
+ "reference": "Speaker, 3 W, 4 ohm, 2-pin connector with 2 mm pitch",
+ "quantity": 1
+ },
+ {
+ "reference": "MAX98357A amplifier module",
+ "quantity": 1
+ },
+ {
+ "reference": "Splash-resistant acoustic membrane, fitted to the inner grille lip",
+ "quantity": 1
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M3 \u00d7 6 socket-head screw",
+ "quantity": 2
+ },
+ {
+ "reference": "M2 \u00d7 6 screw, non-countersunk",
+ "quantity": 2
+ },
+ {
+ "reference": "M2 washer, 0.5 mm thick",
+ "quantity": 2
+ }
+ ],
+ "actions": [
+ "Fix the speaker with two M3 \u00d7 6 screws above its grille.",
+ "Seat the amplifier on its two mounting posts and two support pillars. Use two M2 \u00d7 6 screws with 0.5 mm washers."
+ ],
+ "video": null
+ },
+ {
+ "id": "14",
+ "title": "Fit the computer carrier and servo adapter",
+ "printed_parts": [
+ {
+ "part_id": "Pi_Adapter_R87",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Options/Pi_Adapter_R87.stl"
+ },
+ {
+ "part_id": "Jetson_Adapter_R87",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Options/Jetson_Adapter_R87.stl"
+ }
+ ],
+ "components": [
+ {
+ "reference": "Waveshare Bus Servo Adapter A",
+ "quantity": 1
+ },
+ {
+ "reference": "Pi only: HAT mounting screws and spacers, supplied with the HAT",
+ "quantity": "1 kit",
+ "scope": "COMPUTE_PI"
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M3 \u00d7 6 socket-head screw",
+ "quantity": 2
+ },
+ {
+ "reference": "M3 \u00d7 8 socket-head screw",
+ "quantity": 2
+ },
+ {
+ "reference": "M3 washer, 0.5 mm thick",
+ "quantity": 4
+ },
+ {
+ "reference": "M2.5 \u00d7 8 screw, non-countersunk",
+ "quantity": 4
+ },
+ {
+ "reference": "M2.5 washer, 0.5 mm thick",
+ "quantity": 4
+ },
+ {
+ "reference": "Jetson only: M3 \u00d7 8 socket-head screw, no washer",
+ "quantity": 2,
+ "scope": "COMPUTE_JETSON"
+ }
+ ],
+ "actions": [
+ "Choose one carrier: Jetson or Pi.",
+ "Use the two M3 \u00d7 6 screws at the front and the two M3 \u00d7 8 screws at the rear, with one 0.5 mm washer each.",
+ "For Jetson, secure the two retaining tabs with two M3 \u00d7 8 screws, without washers.",
+ "For Pi/HAT, use the screws and spacers supplied with the HAT; prepare this assembly before fitting the carrier in the hull."
+ ],
+ "video": null
+ },
+ {
+ "id": "15",
+ "title": "Fit the camera option",
+ "printed_parts": [
+ {
+ "part_id": "Gemini_Window_Adapter_R89",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Options/Gemini_Window_Adapter_R89.stl"
+ },
+ {
+ "part_id": "RealSense_Insert_R72",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Options/RealSense_Insert_R72.stl"
+ },
+ {
+ "part_id": "Gemini_Flush_Insert_R72",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Options/Gemini_Flush_Insert_R72.stl"
+ }
+ ],
+ "components": [
+ {
+ "reference": "RealSense D455 OR Orbbec Gemini 2",
+ "quantity": 1
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "RealSense only: M4 \u00d7 10 socket-head screw",
+ "quantity": 2
+ },
+ {
+ "reference": "Gemini only: M3 \u00d7 8 socket-head screw",
+ "quantity": 2
+ }
+ ],
+ "actions": [
+ "For RealSense, slide the support insert down from the top, then use its two M4 \u00d7 10 screws.",
+ "For Gemini, use the flush insert and the window bezel instead. Secure the camera with two M3 \u00d7 8 screws; keep the USB opening clear."
+ ],
+ "video": null
+ },
+ {
+ "id": "16",
+ "title": "Fit the LiDAR carriage",
+ "printed_parts": [
+ {
+ "part_id": "Lidar_dovetail_carriage_R21",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/Lidar_dovetail_carriage_R21.stl"
+ }
+ ],
+ "components": [
+ {
+ "reference": "SLAMTEC RPLIDAR C1",
+ "quantity": 1
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M3 \u00d7 10 socket-head screw",
+ "quantity": 2
+ },
+ {
+ "reference": "M2.5 \u00d7 6 socket-head screw",
+ "quantity": 4
+ },
+ {
+ "reference": "M3 \u00d7 20 socket-head screw",
+ "quantity": 1
+ }
+ ],
+ "actions": [
+ "With the carriage removed, secure the LiDAR base to the hull with two M3 \u00d7 10 screws.",
+ "Secure the C1 to the carriage with four M2.5 \u00d7 6 screws, slide it onto the base and lock it with the M3 \u00d7 20 screw, without a washer, into the M3 insert."
+ ],
+ "video": null
+ },
+ {
+ "id": "17",
+ "title": "Fit power distribution and cooling",
+ "printed_parts": [
+ {
+ "part_id": "XT30_distribution_base",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/XT30_distribution_base.stl"
+ },
+ {
+ "part_id": "XT30_distribution_lid",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/XT30_distribution_lid.stl"
+ },
+ {
+ "part_id": "XT30_insulating_separator",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/XT30_insulating_separator.stl"
+ }
+ ],
+ "components": [
+ {
+ "reference": "3010 fan, 12 V",
+ "quantity": 2
+ },
+ {
+ "reference": "12-cell battery pack, 3S4P, with BMS, 110 \u00d7 67 \u00d7 35 mm",
+ "quantity": 1
+ },
+ {
+ "reference": "Power harness wire, fuse, switches and USB cables",
+ "quantity": 1
+ },
+ {
+ "reference": "DC male barrel plug, 5.5 \u00d7 2.5 mm, 9.5 mm barrel, centre positive \u2014 Jetson power",
+ "quantity": 1,
+ "scope": "COMPUTE_JETSON"
+ },
+ {
+ "reference": "DC male barrel plug matching the input of the Pi 5 V power supply",
+ "quantity": 1,
+ "scope": "COMPUTE_PI"
+ },
+ {
+ "reference": "DC male barrel plug, 5.5 \u00d7 2.1 mm \u2014 Waveshare Bus Servo Adapter A power",
+ "quantity": 1
+ },
+ {
+ "reference": "DC male barrel plug, 5.5 \u00d7 2.1 mm \u2014 battery extension to the panel socket",
+ "quantity": 1
+ },
+ {
+ "reference": "XT30 enclosure connectors: 1 input + 4 outputs, from the BOM connector pairs",
+ "quantity": 5
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M2.5 \u00d7 10 low-head screw, head diameter 5 mm maximum",
+ "quantity": 4
+ }
+ ],
+ "actions": [
+ "Clip the two fans into their mounts.",
+ "Assemble the XT30 base, insulating separator and lid with four low-head M2.5 \u00d7 10 screws."
+ ],
+ "video": "videos/07-xt30-power-distribution.mp4"
+ },
+ {
+ "id": "18",
+ "title": "Fit the arm plate and build the arm",
+ "printed_parts": [
+ {
+ "part_id": "Arm_Mounting_Platform_R22",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/Arm_Mounting_Platform_R22.stl"
+ },
+ {
+ "part_id": "SO101_Base",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/SO101_Base.stl"
+ },
+ {
+ "part_id": "SO101_Shoulder_rotation",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/SO101_Shoulder_rotation.stl"
+ },
+ {
+ "part_id": "SO101_Base_motor_holder",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/SO101_Base_motor_holder.stl"
+ },
+ {
+ "part_id": "SO101_Shoulder_bracket_cable_clip",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/SO101_Shoulder_bracket_cable_clip.stl"
+ },
+ {
+ "part_id": "SO101_Upper_arm_cable_clip",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/SO101_Upper_arm_cable_clip.stl"
+ },
+ {
+ "part_id": "SO101_Forearm_cable_clip",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/SO101_Forearm_cable_clip.stl"
+ },
+ {
+ "part_id": "SO101_Wrist_cable_clip",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/SO101_Wrist_cable_clip.stl"
+ },
+ {
+ "part_id": "SO101_Wrist_bracket",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/SO101_Wrist_bracket.stl"
+ }
+ ],
+ "components": [
+ {
+ "reference": "ST3215 12 V serial bus servo",
+ "quantity": 5
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M3 \u00d7 10 socket-head screw",
+ "quantity": 4
+ },
+ {
+ "reference": "M4 \u00d7 25 countersunk 90-degree screw",
+ "quantity": 4
+ },
+ {
+ "reference": "M4 hex nut",
+ "quantity": 4
+ },
+ {
+ "reference": "Kit screw: M2 \u00d7 6, original servo head",
+ "quantity": 20
+ },
+ {
+ "reference": "Kit screw: M3 \u00d7 6, original servo head",
+ "quantity": 37
+ }
+ ],
+ "actions": [
+ "Fit the arm plate with four M3 \u00d7 10 socket-head screws. Do not add washers in the counterbores.",
+ "Use the original servo screw packs for the SO101 joints. Keep the camera and servo cables in the printed guides.",
+ "For the wrist-camera cable, heat the printed clips to 70 \u00b0C, then close them around the cable."
+ ],
+ "video": null
+ },
+ {
+ "id": "19",
+ "title": "Build the gripper and wrist camera",
+ "printed_parts": [
+ {
+ "part_id": "NC90_Right_side_shield",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/NC90_Right_side_shield.stl"
+ },
+ {
+ "part_id": "NC90_Pinion",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/NC90_Pinion.stl"
+ },
+ {
+ "part_id": "NC90_Cable_guide",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/NC90_Cable_guide.stl"
+ },
+ {
+ "part_id": "NC90_Right_jaw_extended_rack",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/NC90_Right_jaw_extended_rack.stl"
+ },
+ {
+ "part_id": "Gripper_Camera_Mount_R30",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/Gripper_Camera_Mount_R30.stl"
+ },
+ {
+ "part_id": "NC90_Left_side_shield",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/NC90_Left_side_shield.stl"
+ },
+ {
+ "part_id": "NC90_Base_extended_rails",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/NC90_Base_extended_rails.stl"
+ },
+ {
+ "part_id": "NC90_Left_jaw_extended_rack",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/NC90_Left_jaw_extended_rack.stl"
+ }
+ ],
+ "components": [
+ {
+ "reference": "CF35-12 gripper servo",
+ "quantity": 1
+ },
+ {
+ "reference": "Wrist USB camera for the R30 mount, 21 \u00d7 13.5 mm PCB hole pattern",
+ "quantity": 1
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "Kit screw: M3 \u00d7 6 cross-head ISO7045",
+ "quantity": 11
+ },
+ {
+ "reference": "Kit screw: #1-42 x3/16 inch typeAB",
+ "quantity": 6
+ },
+ {
+ "reference": "M2 \u00d7 6 screw, non-countersunk, for wrist camera PCB",
+ "quantity": 4
+ },
+ {
+ "reference": "M3 \u00d7 10 socket-head screw, for wrist camera bracket",
+ "quantity": 2
+ },
+ {
+ "reference": "M3 hex nut, for wrist camera bracket",
+ "quantity": 2
+ }
+ ],
+ "actions": [
+ "Use the widened NC90 jaws and rails, keeping the two racks in phase.",
+ "Fit the current camera mount. Retain the original gripper screw types.",
+ "Fix the R30 camera bracket to the gripper with two M3 \u00d7 10 screws and two M3 nuts, without washers. Fix the matching camera PCB with four M2 \u00d7 6 screws."
+ ],
+ "video": null
+ },
+ {
+ "id": "20",
+ "title": "Close the hull and fit the bin",
+ "printed_parts": [
+ {
+ "part_id": "02_Motor_access_hatch_10_screws",
+ "quantity": 1,
+ "material": "PETG",
+ "file": "STL/Common/02_Motor_access_hatch_10_screws.stl"
+ },
+ {
+ "part_id": "Upper_cover_R9",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/Upper_cover_R9.stl"
+ },
+ {
+ "part_id": "14_Bin_20x10x2_magnet_pockets",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Common/14_Bin_20x10x2_magnet_pockets.stl",
+ "show_in_prepare": false
+ },
+ {
+ "part_id": "Upper_Cover_R10_Rear",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Options/Upper_Cover_R10_Rear.stl",
+ "display_name": "Split cover \u00b7 rear section"
+ },
+ {
+ "part_id": "Upper_Cover_R10_Lidar_Extension",
+ "quantity": 1,
+ "material": "PLA",
+ "file": "STL/Options/Upper_Cover_R10_Lidar_Extension.stl",
+ "display_name": "Split cover \u00b7 LiDAR extension"
+ }
+ ],
+ "components": [
+ {
+ "reference": "Magnet, 20 x10 x2 mm",
+ "quantity": 4
+ },
+ {
+ "reference": "Small two-part epoxy adhesive kit, two tubes (resin + hardener), for the magnets and split cover",
+ "quantity": "1 kit"
+ }
+ ],
+ "fasteners": [
+ {
+ "reference": "M3 \u00d7 10 countersunk 90-degree screw, head diameter 6.4 mm maximum",
+ "quantity": 10
+ },
+ {
+ "reference": "M3 \u00d7 10 countersunk 90-degree screw, head diameter 5.6 mm maximum",
+ "quantity": 4
+ }
+ ],
+ "actions": [
+ "For the split cover: test-fit the two pieces off the rover. Lower the LiDAR extension from above into both dovetail sockets. Apply a thin layer of two-part epoxy on the mating faces, seat the joint, align the outer surfaces and hold until cured. The glued cover then mounts with the same four screws as the one-piece cover.",
+ "Close the motor hatch with ten M3 \u00d7 10 countersunk screws.",
+ "Fit the upper cover with four M3 \u00d7 10 countersunk screws.",
+ "Check the polarity of all four magnets, then glue them into their pockets with epoxy. Let the epoxy cure before fitting the bin."
+ ],
+ "video": null,
+ "image": "images/split-cover-r10.jpg",
+ "image_alt": "Two-piece upper cover: lower the LiDAR extension into the two dovetail sockets from above",
+ "image_scope": "COVER_SPLIT"
+ }
+ ]
+}
diff --git a/docs/build/fonts/SpaceGrotesk-OFL.txt b/docs/build/fonts/SpaceGrotesk-OFL.txt
new file mode 100644
index 0000000..cb512b9
--- /dev/null
+++ b/docs/build/fonts/SpaceGrotesk-OFL.txt
@@ -0,0 +1,93 @@
+Copyright 2020 The Space Grotesk Project Authors (https://github.com/floriankarsten/space-grotesk)
+
+This Font Software is licensed under the SIL Open Font License, Version 1.1.
+This license is copied below, and is also available with a FAQ at:
+http://scripts.sil.org/OFL
+
+
+-----------------------------------------------------------
+SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
+-----------------------------------------------------------
+
+PREAMBLE
+The goals of the Open Font License (OFL) are to stimulate worldwide
+development of collaborative font projects, to support the font creation
+efforts of academic and linguistic communities, and to provide a free and
+open framework in which fonts may be shared and improved in partnership
+with others.
+
+The OFL allows the licensed fonts to be used, studied, modified and
+redistributed freely as long as they are not sold by themselves. The
+fonts, including any derivative works, can be bundled, embedded,
+redistributed and/or sold with any software provided that any reserved
+names are not used by derivative works. The fonts and derivatives,
+however, cannot be released under any other type of license. The
+requirement for fonts to remain under this license does not apply
+to any document created using the fonts or their derivatives.
+
+DEFINITIONS
+"Font Software" refers to the set of files released by the Copyright
+Holder(s) under this license and clearly marked as such. This may
+include source files, build scripts and documentation.
+
+"Reserved Font Name" refers to any names specified as such after the
+copyright statement(s).
+
+"Original Version" refers to the collection of Font Software components as
+distributed by the Copyright Holder(s).
+
+"Modified Version" refers to any derivative made by adding to, deleting,
+or substituting -- in part or in whole -- any of the components of the
+Original Version, by changing formats or by porting the Font Software to a
+new environment.
+
+"Author" refers to any designer, engineer, programmer, technical
+writer or other person who contributed to the Font Software.
+
+PERMISSION & CONDITIONS
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of the Font Software, to use, study, copy, merge, embed, modify,
+redistribute, and sell modified and unmodified copies of the Font
+Software, subject to the following conditions:
+
+1) Neither the Font Software nor any of its individual components,
+in Original or Modified Versions, may be sold by itself.
+
+2) Original or Modified Versions of the Font Software may be bundled,
+redistributed and/or sold with any software, provided that each copy
+contains the above copyright notice and this license. These can be
+included either as stand-alone text files, human-readable headers or
+in the appropriate machine-readable metadata fields within text or
+binary files as long as those fields can be easily viewed by the user.
+
+3) No Modified Version of the Font Software may use the Reserved Font
+Name(s) unless explicit written permission is granted by the corresponding
+Copyright Holder. This restriction only applies to the primary font name as
+presented to the users.
+
+4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
+Software shall not be used to promote, endorse or advertise any
+Modified Version, except to acknowledge the contribution(s) of the
+Copyright Holder(s) and the Author(s) or with their explicit written
+permission.
+
+5) The Font Software, modified or unmodified, in part or in whole,
+must be distributed entirely under this license, and must not be
+distributed under any other license. The requirement for fonts to
+remain under this license does not apply to any document created
+using the Font Software.
+
+TERMINATION
+This license becomes null and void if any of the above conditions are
+not met.
+
+DISCLAIMER
+THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
+COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
+OTHER DEALINGS IN THE FONT SOFTWARE.
diff --git a/docs/build/fonts/SpaceGrotesk.ttf b/docs/build/fonts/SpaceGrotesk.ttf
new file mode 100644
index 0000000..a1b2e6c
Binary files /dev/null and b/docs/build/fonts/SpaceGrotesk.ttf differ
diff --git a/docs/build/images/01-match-spacer-dots.jpg b/docs/build/images/01-match-spacer-dots.jpg
new file mode 100644
index 0000000..c74f02b
Binary files /dev/null and b/docs/build/images/01-match-spacer-dots.jpg differ
diff --git a/docs/build/images/02-road-wheel-spacers.jpg b/docs/build/images/02-road-wheel-spacers.jpg
new file mode 100644
index 0000000..8836c14
Binary files /dev/null and b/docs/build/images/02-road-wheel-spacers.jpg differ
diff --git a/docs/build/images/03-drive-wheel-spacers.jpg b/docs/build/images/03-drive-wheel-spacers.jpg
new file mode 100644
index 0000000..89c41cb
Binary files /dev/null and b/docs/build/images/03-drive-wheel-spacers.jpg differ
diff --git a/docs/build/images/04-idler-tensioner-spacers.jpg b/docs/build/images/04-idler-tensioner-spacers.jpg
new file mode 100644
index 0000000..dcfd48f
Binary files /dev/null and b/docs/build/images/04-idler-tensioner-spacers.jpg differ
diff --git a/docs/build/images/05-track-side-reassembly.jpg b/docs/build/images/05-track-side-reassembly.jpg
new file mode 100644
index 0000000..c5ead17
Binary files /dev/null and b/docs/build/images/05-track-side-reassembly.jpg differ
diff --git a/docs/build/images/06-road-wheel-screws.jpg b/docs/build/images/06-road-wheel-screws.jpg
new file mode 100644
index 0000000..b84202f
Binary files /dev/null and b/docs/build/images/06-road-wheel-screws.jpg differ
diff --git a/docs/build/images/07-xt30-power-distribution.jpg b/docs/build/images/07-xt30-power-distribution.jpg
new file mode 100644
index 0000000..951edf3
Binary files /dev/null and b/docs/build/images/07-xt30-power-distribution.jpg differ
diff --git a/docs/build/images/cytron-junction-current.png b/docs/build/images/cytron-junction-current.png
new file mode 100644
index 0000000..e8b55a1
Binary files /dev/null and b/docs/build/images/cytron-junction-current.png differ
diff --git a/docs/build/images/moss-wordmark.svg b/docs/build/images/moss-wordmark.svg
new file mode 100644
index 0000000..00e3313
--- /dev/null
+++ b/docs/build/images/moss-wordmark.svg
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="675" height="219" viewBox="33.0 13.0 675.0 219.0" role="img"><title>wordmark-white</title><path fill="#eaf0ef" d="M48.896 212.0V32.79999999999998H111.616L142.59199999999998 188.96H147.2L178.17600000000002 32.79999999999998H240.89600000000002V212.0H208.12800000000001V57.632000000000005H203.52L172.8 212.0H116.992L86.27199999999999 57.632000000000005H81.664V212.0Z"/><path fill="#eaf0ef" d="M330.528 215.584Q296.736 215.584 276.76800000000003 197.024Q256.8 178.464 256.8 143.904V100.896Q256.8 66.33599999999998 276.76800000000003 47.775999999999996Q296.736 29.216000000000008 330.528 29.216000000000008Q364.32 29.216000000000008 384.288 47.775999999999996Q404.256 66.33599999999998 404.256 100.896V143.904Q404.256 178.464 384.288 197.024Q364.32 215.584 330.528 215.584ZM330.528 185.376Q349.472 185.376 359.96799999999996 174.368Q370.464 163.36 370.464 144.928V99.872Q370.464 81.44 359.96799999999996 70.432Q349.472 59.42400000000001 330.528 59.42400000000001Q311.84000000000003 59.42400000000001 301.216 70.432Q290.592 81.44 290.592 99.872V144.928Q290.592 163.36 301.216 174.368Q311.84000000000003 185.376 330.528 185.376Z"/><path fill="#eaf0ef" d="M483.104 215.584Q462.368 215.584 446.496 208.16Q430.624 200.736 421.664 186.91199999999998Q412.704 173.088 412.704 153.632V146.464H445.984V153.632Q445.984 169.76 455.96799999999996 177.824Q465.952 185.888 483.104 185.888Q500.512 185.888 509.08799999999997 178.976Q517.664 172.064 517.664 161.312Q517.664 153.888 513.44 149.28Q509.216 144.672 501.15200000000004 141.728Q493.088 138.784 481.568 136.224L475.68 134.94400000000002Q457.248 130.848 444.06399999999996 124.57600000000001Q430.88 118.304 423.84000000000003 108.064Q416.8 97.824 416.8 81.44Q416.8 65.05599999999998 424.608 53.40799999999999Q432.416 41.75999999999999 446.624 35.488Q460.832 29.216000000000008 480.032 29.216000000000008Q499.23199999999997 29.216000000000008 514.208 35.744Q529.184 42.27199999999999 537.76 55.19999999999999Q546.336 68.12799999999999 546.336 87.584V95.264H513.056V87.584Q513.056 77.344 509.088 71.07199999999999Q505.12 64.79999999999998 497.696 61.855999999999995Q490.272 58.912000000000006 480.032 58.912000000000006Q464.672 58.912000000000006 457.376 64.672Q450.08 70.43199999999999 450.08 80.416Q450.08 87.072 453.536 91.68Q456.992 96.288 463.904 99.36Q470.81600000000003 102.432 481.568 104.736L487.456 106.01599999999999Q506.656 110.112 520.864 116.512Q535.072 122.91199999999999 543.008 133.408Q550.944 143.904 550.944 160.288Q550.944 176.672 542.624 189.088Q534.304 201.504 519.072 208.54399999999998Q503.84000000000003 215.584 483.104 215.584Z"/><path fill="#eaf0ef" d="M624.104 215.584Q603.368 215.584 587.4960000000001 208.16Q571.624 200.736 562.664 186.91199999999998Q553.704 173.088 553.704 153.632V146.464H586.984V153.632Q586.984 169.76 596.9680000000001 177.824Q606.952 185.888 624.104 185.888Q641.512 185.888 650.088 178.976Q658.664 172.064 658.664 161.312Q658.664 153.888 654.44 149.28Q650.216 144.672 642.152 141.728Q634.088 138.784 622.568 136.224L616.6800000000001 134.94400000000002Q598.248 130.848 585.0640000000001 124.57600000000001Q571.88 118.304 564.8399999999999 108.064Q557.8 97.824 557.8 81.44Q557.8 65.05599999999998 565.608 53.40799999999999Q573.416 41.75999999999999 587.624 35.488Q601.832 29.216000000000008 621.032 29.216000000000008Q640.232 29.216000000000008 655.208 35.744Q670.184 42.27199999999999 678.76 55.19999999999999Q687.336 68.12799999999999 687.336 87.584V95.264H654.056V87.584Q654.056 77.344 650.088 71.07199999999999Q646.12 64.79999999999998 638.696 61.855999999999995Q631.272 58.912000000000006 621.032 58.912000000000006Q605.672 58.912000000000006 598.376 64.672Q591.08 70.43199999999999 591.08 80.416Q591.08 87.072 594.5360000000001 91.68Q597.992 96.288 604.904 99.36Q611.816 102.432 622.568 104.736L628.456 106.01599999999999Q647.656 110.112 661.864 116.512Q676.072 122.91199999999999 684.008 133.408Q691.944 143.904 691.944 160.288Q691.944 176.672 683.624 189.088Q675.304 201.504 660.072 208.54399999999998Q644.84 215.584 624.104 215.584Z"/></svg>
diff --git a/docs/build/images/outer-frame-diagonal.jpg b/docs/build/images/outer-frame-diagonal.jpg
new file mode 100644
index 0000000..56cca56
Binary files /dev/null and b/docs/build/images/outer-frame-diagonal.jpg differ
diff --git a/docs/build/images/parts/02_Motor_access_hatch_10_screws.jpg b/docs/build/images/parts/02_Motor_access_hatch_10_screws.jpg
new file mode 100644
index 0000000..5ec6e31
Binary files /dev/null and b/docs/build/images/parts/02_Motor_access_hatch_10_screws.jpg differ
diff --git a/docs/build/images/parts/05_Left_bearing_retainer.jpg b/docs/build/images/parts/05_Left_bearing_retainer.jpg
new file mode 100644
index 0000000..134fcd2
Binary files /dev/null and b/docs/build/images/parts/05_Left_bearing_retainer.jpg differ
diff --git a/docs/build/images/parts/06_Right_bearing_retainer.jpg b/docs/build/images/parts/06_Right_bearing_retainer.jpg
new file mode 100644
index 0000000..7055c8f
Binary files /dev/null and b/docs/build/images/parts/06_Right_bearing_retainer.jpg differ
diff --git a/docs/build/images/parts/14_Bin_20x10x2_magnet_pockets.jpg b/docs/build/images/parts/14_Bin_20x10x2_magnet_pockets.jpg
new file mode 100644
index 0000000..aae4edf
Binary files /dev/null and b/docs/build/images/parts/14_Bin_20x10x2_magnet_pockets.jpg differ
diff --git a/docs/build/images/parts/Arm_Mounting_Platform_R22.jpg b/docs/build/images/parts/Arm_Mounting_Platform_R22.jpg
new file mode 100644
index 0000000..d8c9156
Binary files /dev/null and b/docs/build/images/parts/Arm_Mounting_Platform_R22.jpg differ
diff --git a/docs/build/images/parts/Gemini_Flush_Insert_R72.jpg b/docs/build/images/parts/Gemini_Flush_Insert_R72.jpg
new file mode 100644
index 0000000..07e7c03
Binary files /dev/null and b/docs/build/images/parts/Gemini_Flush_Insert_R72.jpg differ
diff --git a/docs/build/images/parts/Gemini_Window_Adapter_R89.jpg b/docs/build/images/parts/Gemini_Window_Adapter_R89.jpg
new file mode 100644
index 0000000..25679ee
Binary files /dev/null and b/docs/build/images/parts/Gemini_Window_Adapter_R89.jpg differ
diff --git a/docs/build/images/parts/Gripper_Camera_Mount_R30.jpg b/docs/build/images/parts/Gripper_Camera_Mount_R30.jpg
new file mode 100644
index 0000000..0ac4391
Binary files /dev/null and b/docs/build/images/parts/Gripper_Camera_Mount_R30.jpg differ
diff --git a/docs/build/images/parts/Hull_R92.jpg b/docs/build/images/parts/Hull_R92.jpg
new file mode 100644
index 0000000..2228150
Binary files /dev/null and b/docs/build/images/parts/Hull_R92.jpg differ
diff --git a/docs/build/images/parts/Hull_R92_Split_Front_Battery_Camera.jpg b/docs/build/images/parts/Hull_R92_Split_Front_Battery_Camera.jpg
new file mode 100644
index 0000000..ab90df6
Binary files /dev/null and b/docs/build/images/parts/Hull_R92_Split_Front_Battery_Camera.jpg differ
diff --git a/docs/build/images/parts/Hull_R92_Split_Rear_Motor_Computer.jpg b/docs/build/images/parts/Hull_R92_Split_Rear_Motor_Computer.jpg
new file mode 100644
index 0000000..5868998
Binary files /dev/null and b/docs/build/images/parts/Hull_R92_Split_Rear_Motor_Computer.jpg differ
diff --git a/docs/build/images/parts/Jetson_Adapter_R87.jpg b/docs/build/images/parts/Jetson_Adapter_R87.jpg
new file mode 100644
index 0000000..120b53b
Binary files /dev/null and b/docs/build/images/parts/Jetson_Adapter_R87.jpg differ
diff --git a/docs/build/images/parts/Left_22T_idler_wheel_inner_half_R13.jpg b/docs/build/images/parts/Left_22T_idler_wheel_inner_half_R13.jpg
new file mode 100644
index 0000000..27c4566
Binary files /dev/null and b/docs/build/images/parts/Left_22T_idler_wheel_inner_half_R13.jpg differ
diff --git a/docs/build/images/parts/Left_22T_idler_wheel_outer_half_R13.jpg b/docs/build/images/parts/Left_22T_idler_wheel_outer_half_R13.jpg
new file mode 100644
index 0000000..3aa0b2d
Binary files /dev/null and b/docs/build/images/parts/Left_22T_idler_wheel_outer_half_R13.jpg differ
diff --git a/docs/build/images/parts/Left_625_road_wheel_-70_inner_half_R13.jpg b/docs/build/images/parts/Left_625_road_wheel_-70_inner_half_R13.jpg
new file mode 100644
index 0000000..4715258
Binary files /dev/null and b/docs/build/images/parts/Left_625_road_wheel_-70_inner_half_R13.jpg differ
diff --git a/docs/build/images/parts/Left_625_road_wheel_-70_outer_half_R13.jpg b/docs/build/images/parts/Left_625_road_wheel_-70_outer_half_R13.jpg
new file mode 100644
index 0000000..2a9f572
Binary files /dev/null and b/docs/build/images/parts/Left_625_road_wheel_-70_outer_half_R13.jpg differ
diff --git a/docs/build/images/parts/Left_625_road_wheel_0_inner_half_R13.jpg b/docs/build/images/parts/Left_625_road_wheel_0_inner_half_R13.jpg
new file mode 100644
index 0000000..4715258
Binary files /dev/null and b/docs/build/images/parts/Left_625_road_wheel_0_inner_half_R13.jpg differ
diff --git a/docs/build/images/parts/Left_625_road_wheel_0_outer_half_R13.jpg b/docs/build/images/parts/Left_625_road_wheel_0_outer_half_R13.jpg
new file mode 100644
index 0000000..2a9f572
Binary files /dev/null and b/docs/build/images/parts/Left_625_road_wheel_0_outer_half_R13.jpg differ
diff --git a/docs/build/images/parts/Left_625_road_wheel_70_inner_half_R13.jpg b/docs/build/images/parts/Left_625_road_wheel_70_inner_half_R13.jpg
new file mode 100644
index 0000000..4715258
Binary files /dev/null and b/docs/build/images/parts/Left_625_road_wheel_70_inner_half_R13.jpg differ
diff --git a/docs/build/images/parts/Left_625_road_wheel_70_outer_half_R13.jpg b/docs/build/images/parts/Left_625_road_wheel_70_outer_half_R13.jpg
new file mode 100644
index 0000000..2a9f572
Binary files /dev/null and b/docs/build/images/parts/Left_625_road_wheel_70_outer_half_R13.jpg differ
diff --git a/docs/build/images/parts/Left_Cover_motor_bearing.jpg b/docs/build/images/parts/Left_Cover_motor_bearing.jpg
new file mode 100644
index 0000000..296b7e9
Binary files /dev/null and b/docs/build/images/parts/Left_Cover_motor_bearing.jpg differ
diff --git a/docs/build/images/parts/Left_Cover_tensioner_outer.jpg b/docs/build/images/parts/Left_Cover_tensioner_outer.jpg
new file mode 100644
index 0000000..422fb74
Binary files /dev/null and b/docs/build/images/parts/Left_Cover_tensioner_outer.jpg differ
diff --git a/docs/build/images/parts/Left_Drive_bearing_to_collar_spacer_R12_C1.jpg b/docs/build/images/parts/Left_Drive_bearing_to_collar_spacer_R12_C1.jpg
new file mode 100644
index 0000000..5fd4dc6
Binary files /dev/null and b/docs/build/images/parts/Left_Drive_bearing_to_collar_spacer_R12_C1.jpg differ
diff --git a/docs/build/images/parts/Left_HEX12_drive_wheel_inner_half_R13.jpg b/docs/build/images/parts/Left_HEX12_drive_wheel_inner_half_R13.jpg
new file mode 100644
index 0000000..ef267b3
Binary files /dev/null and b/docs/build/images/parts/Left_HEX12_drive_wheel_inner_half_R13.jpg differ
diff --git a/docs/build/images/parts/Left_HEX12_drive_wheel_outer_half_R13.jpg b/docs/build/images/parts/Left_HEX12_drive_wheel_outer_half_R13.jpg
new file mode 100644
index 0000000..eee9d19
Binary files /dev/null and b/docs/build/images/parts/Left_HEX12_drive_wheel_outer_half_R13.jpg differ
diff --git a/docs/build/images/parts/Left_Outer_Track_Frame_R32.jpg b/docs/build/images/parts/Left_Outer_Track_Frame_R32.jpg
new file mode 100644
index 0000000..f16828b
Binary files /dev/null and b/docs/build/images/parts/Left_Outer_Track_Frame_R32.jpg differ
diff --git a/docs/build/images/parts/Left_Slider_outer.jpg b/docs/build/images/parts/Left_Slider_outer.jpg
new file mode 100644
index 0000000..687fd2b
Binary files /dev/null and b/docs/build/images/parts/Left_Slider_outer.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_cross_member_-40.jpg b/docs/build/images/parts/Left_Spacer_cross_member_-40.jpg
new file mode 100644
index 0000000..5919450
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_cross_member_-40.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_cross_member_40.jpg b/docs/build/images/parts/Left_Spacer_cross_member_40.jpg
new file mode 100644
index 0000000..5919450
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_cross_member_40.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_drive_inner_ID03_R24.jpg b/docs/build/images/parts/Left_Spacer_drive_inner_ID03_R24.jpg
new file mode 100644
index 0000000..7febce6
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_drive_inner_ID03_R24.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24.jpg b/docs/build/images/parts/Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24.jpg
new file mode 100644
index 0000000..7b207e7
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_road_wheel_-70_center.jpg b/docs/build/images/parts/Left_Spacer_road_wheel_-70_center.jpg
new file mode 100644
index 0000000..e4ade3f
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_road_wheel_-70_center.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_road_wheel_-70_inner_ID01_R24.jpg b/docs/build/images/parts/Left_Spacer_road_wheel_-70_inner_ID01_R24.jpg
new file mode 100644
index 0000000..e43c5a3
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_road_wheel_-70_inner_ID01_R24.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_road_wheel_-70_outer_ID02_R24.jpg b/docs/build/images/parts/Left_Spacer_road_wheel_-70_outer_ID02_R24.jpg
new file mode 100644
index 0000000..e68b4d6
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_road_wheel_-70_outer_ID02_R24.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_road_wheel_0_center.jpg b/docs/build/images/parts/Left_Spacer_road_wheel_0_center.jpg
new file mode 100644
index 0000000..e4ade3f
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_road_wheel_0_center.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_road_wheel_0_inner_ID01_R24.jpg b/docs/build/images/parts/Left_Spacer_road_wheel_0_inner_ID01_R24.jpg
new file mode 100644
index 0000000..9c8917f
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_road_wheel_0_inner_ID01_R24.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_road_wheel_0_outer_ID02_R24.jpg b/docs/build/images/parts/Left_Spacer_road_wheel_0_outer_ID02_R24.jpg
new file mode 100644
index 0000000..e68b4d6
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_road_wheel_0_outer_ID02_R24.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_road_wheel_70_center.jpg b/docs/build/images/parts/Left_Spacer_road_wheel_70_center.jpg
new file mode 100644
index 0000000..e4ade3f
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_road_wheel_70_center.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_road_wheel_70_inner_ID01_R24.jpg b/docs/build/images/parts/Left_Spacer_road_wheel_70_inner_ID01_R24.jpg
new file mode 100644
index 0000000..e43c5a3
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_road_wheel_70_inner_ID01_R24.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_road_wheel_70_outer_ID02_R24.jpg b/docs/build/images/parts/Left_Spacer_road_wheel_70_outer_ID02_R24.jpg
new file mode 100644
index 0000000..e68b4d6
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_road_wheel_70_outer_ID02_R24.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_tensioner_center.jpg b/docs/build/images/parts/Left_Spacer_tensioner_center.jpg
new file mode 100644
index 0000000..ce08543
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_tensioner_center.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_tensioner_inner_ID05_R24.jpg b/docs/build/images/parts/Left_Spacer_tensioner_inner_ID05_R24.jpg
new file mode 100644
index 0000000..1cfc325
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_tensioner_inner_ID05_R24.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_tensioner_outer_ID06_R24.jpg b/docs/build/images/parts/Left_Spacer_tensioner_outer_ID06_R24.jpg
new file mode 100644
index 0000000..403b1b5
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_tensioner_outer_ID06_R24.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_tensioner_retainer_inner_ID07_R24.jpg b/docs/build/images/parts/Left_Spacer_tensioner_retainer_inner_ID07_R24.jpg
new file mode 100644
index 0000000..d16af00
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_tensioner_retainer_inner_ID07_R24.jpg differ
diff --git a/docs/build/images/parts/Left_Spacer_tensioner_retainer_outer_ID08_R24.jpg b/docs/build/images/parts/Left_Spacer_tensioner_retainer_outer_ID08_R24.jpg
new file mode 100644
index 0000000..16c0d88
Binary files /dev/null and b/docs/build/images/parts/Left_Spacer_tensioner_retainer_outer_ID08_R24.jpg differ
diff --git a/docs/build/images/parts/Left_Track_R78_70_Teeth.jpg b/docs/build/images/parts/Left_Track_R78_70_Teeth.jpg
new file mode 100644
index 0000000..22d9198
Binary files /dev/null and b/docs/build/images/parts/Left_Track_R78_70_Teeth.jpg differ
diff --git a/docs/build/images/parts/Left_inner_tensioner_cover_R12_C2.jpg b/docs/build/images/parts/Left_inner_tensioner_cover_R12_C2.jpg
new file mode 100644
index 0000000..24755f2
Binary files /dev/null and b/docs/build/images/parts/Left_inner_tensioner_cover_R12_C2.jpg differ
diff --git a/docs/build/images/parts/Left_inner_tensioner_slider.jpg b/docs/build/images/parts/Left_inner_tensioner_slider.jpg
new file mode 100644
index 0000000..9dda55d
Binary files /dev/null and b/docs/build/images/parts/Left_inner_tensioner_slider.jpg differ
diff --git a/docs/build/images/parts/Left_inner_track_frame_R12_C2.jpg b/docs/build/images/parts/Left_inner_track_frame_R12_C2.jpg
new file mode 100644
index 0000000..9aa6d40
Binary files /dev/null and b/docs/build/images/parts/Left_inner_track_frame_R12_C2.jpg differ
diff --git a/docs/build/images/parts/Lidar_Base_R84.jpg b/docs/build/images/parts/Lidar_Base_R84.jpg
new file mode 100644
index 0000000..67749a8
Binary files /dev/null and b/docs/build/images/parts/Lidar_Base_R84.jpg differ
diff --git a/docs/build/images/parts/Lidar_dovetail_carriage_R21.jpg b/docs/build/images/parts/Lidar_dovetail_carriage_R21.jpg
new file mode 100644
index 0000000..604b866
Binary files /dev/null and b/docs/build/images/parts/Lidar_dovetail_carriage_R21.jpg differ
diff --git a/docs/build/images/parts/Motor_Mount_Left_R90.jpg b/docs/build/images/parts/Motor_Mount_Left_R90.jpg
new file mode 100644
index 0000000..12bd212
Binary files /dev/null and b/docs/build/images/parts/Motor_Mount_Left_R90.jpg differ
diff --git a/docs/build/images/parts/Motor_Mount_Right_R90.jpg b/docs/build/images/parts/Motor_Mount_Right_R90.jpg
new file mode 100644
index 0000000..55c5179
Binary files /dev/null and b/docs/build/images/parts/Motor_Mount_Right_R90.jpg differ
diff --git a/docs/build/images/parts/NC90_Base_extended_rails.jpg b/docs/build/images/parts/NC90_Base_extended_rails.jpg
new file mode 100644
index 0000000..b74af99
Binary files /dev/null and b/docs/build/images/parts/NC90_Base_extended_rails.jpg differ
diff --git a/docs/build/images/parts/NC90_Cable_guide.jpg b/docs/build/images/parts/NC90_Cable_guide.jpg
new file mode 100644
index 0000000..d242b1a
Binary files /dev/null and b/docs/build/images/parts/NC90_Cable_guide.jpg differ
diff --git a/docs/build/images/parts/NC90_Left_jaw_extended_rack.jpg b/docs/build/images/parts/NC90_Left_jaw_extended_rack.jpg
new file mode 100644
index 0000000..72680d8
Binary files /dev/null and b/docs/build/images/parts/NC90_Left_jaw_extended_rack.jpg differ
diff --git a/docs/build/images/parts/NC90_Left_side_shield.jpg b/docs/build/images/parts/NC90_Left_side_shield.jpg
new file mode 100644
index 0000000..5f740c7
Binary files /dev/null and b/docs/build/images/parts/NC90_Left_side_shield.jpg differ
diff --git a/docs/build/images/parts/NC90_Pinion.jpg b/docs/build/images/parts/NC90_Pinion.jpg
new file mode 100644
index 0000000..3d74827
Binary files /dev/null and b/docs/build/images/parts/NC90_Pinion.jpg differ
diff --git a/docs/build/images/parts/NC90_Right_jaw_extended_rack.jpg b/docs/build/images/parts/NC90_Right_jaw_extended_rack.jpg
new file mode 100644
index 0000000..eb579ea
Binary files /dev/null and b/docs/build/images/parts/NC90_Right_jaw_extended_rack.jpg differ
diff --git a/docs/build/images/parts/NC90_Right_side_shield.jpg b/docs/build/images/parts/NC90_Right_side_shield.jpg
new file mode 100644
index 0000000..467307e
Binary files /dev/null and b/docs/build/images/parts/NC90_Right_side_shield.jpg differ
diff --git a/docs/build/images/parts/Pi_Adapter_R87.jpg b/docs/build/images/parts/Pi_Adapter_R87.jpg
new file mode 100644
index 0000000..7096c7e
Binary files /dev/null and b/docs/build/images/parts/Pi_Adapter_R87.jpg differ
diff --git a/docs/build/images/parts/RealSense_Insert_R72.jpg b/docs/build/images/parts/RealSense_Insert_R72.jpg
new file mode 100644
index 0000000..9199ac6
Binary files /dev/null and b/docs/build/images/parts/RealSense_Insert_R72.jpg differ
diff --git a/docs/build/images/parts/Right_22T_idler_wheel_inner_half_R13.jpg b/docs/build/images/parts/Right_22T_idler_wheel_inner_half_R13.jpg
new file mode 100644
index 0000000..364ca3b
Binary files /dev/null and b/docs/build/images/parts/Right_22T_idler_wheel_inner_half_R13.jpg differ
diff --git a/docs/build/images/parts/Right_22T_idler_wheel_outer_half_R13.jpg b/docs/build/images/parts/Right_22T_idler_wheel_outer_half_R13.jpg
new file mode 100644
index 0000000..f03ec88
Binary files /dev/null and b/docs/build/images/parts/Right_22T_idler_wheel_outer_half_R13.jpg differ
diff --git a/docs/build/images/parts/Right_625_road_wheel_-70_inner_half_R13.jpg b/docs/build/images/parts/Right_625_road_wheel_-70_inner_half_R13.jpg
new file mode 100644
index 0000000..b3a2ac6
Binary files /dev/null and b/docs/build/images/parts/Right_625_road_wheel_-70_inner_half_R13.jpg differ
diff --git a/docs/build/images/parts/Right_625_road_wheel_-70_outer_half_R13.jpg b/docs/build/images/parts/Right_625_road_wheel_-70_outer_half_R13.jpg
new file mode 100644
index 0000000..5ed700c
Binary files /dev/null and b/docs/build/images/parts/Right_625_road_wheel_-70_outer_half_R13.jpg differ
diff --git a/docs/build/images/parts/Right_625_road_wheel_0_inner_half_R13.jpg b/docs/build/images/parts/Right_625_road_wheel_0_inner_half_R13.jpg
new file mode 100644
index 0000000..4715258
Binary files /dev/null and b/docs/build/images/parts/Right_625_road_wheel_0_inner_half_R13.jpg differ
diff --git a/docs/build/images/parts/Right_625_road_wheel_0_outer_half_R13.jpg b/docs/build/images/parts/Right_625_road_wheel_0_outer_half_R13.jpg
new file mode 100644
index 0000000..2a9f572
Binary files /dev/null and b/docs/build/images/parts/Right_625_road_wheel_0_outer_half_R13.jpg differ
diff --git a/docs/build/images/parts/Right_625_road_wheel_70_inner_half_R13.jpg b/docs/build/images/parts/Right_625_road_wheel_70_inner_half_R13.jpg
new file mode 100644
index 0000000..b3a2ac6
Binary files /dev/null and b/docs/build/images/parts/Right_625_road_wheel_70_inner_half_R13.jpg differ
diff --git a/docs/build/images/parts/Right_625_road_wheel_70_outer_half_R13.jpg b/docs/build/images/parts/Right_625_road_wheel_70_outer_half_R13.jpg
new file mode 100644
index 0000000..2a9f572
Binary files /dev/null and b/docs/build/images/parts/Right_625_road_wheel_70_outer_half_R13.jpg differ
diff --git a/docs/build/images/parts/Right_Cover_motor_bearing.jpg b/docs/build/images/parts/Right_Cover_motor_bearing.jpg
new file mode 100644
index 0000000..296b7e9
Binary files /dev/null and b/docs/build/images/parts/Right_Cover_motor_bearing.jpg differ
diff --git a/docs/build/images/parts/Right_Cover_tensioner_outer.jpg b/docs/build/images/parts/Right_Cover_tensioner_outer.jpg
new file mode 100644
index 0000000..1b643da
Binary files /dev/null and b/docs/build/images/parts/Right_Cover_tensioner_outer.jpg differ
diff --git a/docs/build/images/parts/Right_Drive_bearing_to_collar_spacer_R12_C1.jpg b/docs/build/images/parts/Right_Drive_bearing_to_collar_spacer_R12_C1.jpg
new file mode 100644
index 0000000..5fd4dc6
Binary files /dev/null and b/docs/build/images/parts/Right_Drive_bearing_to_collar_spacer_R12_C1.jpg differ
diff --git a/docs/build/images/parts/Right_HEX12_drive_wheel_inner_half_R13.jpg b/docs/build/images/parts/Right_HEX12_drive_wheel_inner_half_R13.jpg
new file mode 100644
index 0000000..cb1009e
Binary files /dev/null and b/docs/build/images/parts/Right_HEX12_drive_wheel_inner_half_R13.jpg differ
diff --git a/docs/build/images/parts/Right_HEX12_drive_wheel_outer_half_R13.jpg b/docs/build/images/parts/Right_HEX12_drive_wheel_outer_half_R13.jpg
new file mode 100644
index 0000000..5093acc
Binary files /dev/null and b/docs/build/images/parts/Right_HEX12_drive_wheel_outer_half_R13.jpg differ
diff --git a/docs/build/images/parts/Right_Outer_Track_Frame_R32.jpg b/docs/build/images/parts/Right_Outer_Track_Frame_R32.jpg
new file mode 100644
index 0000000..68ea8ba
Binary files /dev/null and b/docs/build/images/parts/Right_Outer_Track_Frame_R32.jpg differ
diff --git a/docs/build/images/parts/Right_Slider_outer.jpg b/docs/build/images/parts/Right_Slider_outer.jpg
new file mode 100644
index 0000000..be93e42
Binary files /dev/null and b/docs/build/images/parts/Right_Slider_outer.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_cross_member_-40.jpg b/docs/build/images/parts/Right_Spacer_cross_member_-40.jpg
new file mode 100644
index 0000000..5919450
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_cross_member_-40.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_cross_member_40.jpg b/docs/build/images/parts/Right_Spacer_cross_member_40.jpg
new file mode 100644
index 0000000..5919450
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_cross_member_40.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_drive_inner_ID03_R24.jpg b/docs/build/images/parts/Right_Spacer_drive_inner_ID03_R24.jpg
new file mode 100644
index 0000000..7febce6
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_drive_inner_ID03_R24.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24.jpg b/docs/build/images/parts/Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24.jpg
new file mode 100644
index 0000000..7b207e7
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_road_wheel_-70_center.jpg b/docs/build/images/parts/Right_Spacer_road_wheel_-70_center.jpg
new file mode 100644
index 0000000..e4ade3f
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_road_wheel_-70_center.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_road_wheel_-70_inner_ID01_R24.jpg b/docs/build/images/parts/Right_Spacer_road_wheel_-70_inner_ID01_R24.jpg
new file mode 100644
index 0000000..e43c5a3
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_road_wheel_-70_inner_ID01_R24.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_road_wheel_-70_outer_ID02_R24.jpg b/docs/build/images/parts/Right_Spacer_road_wheel_-70_outer_ID02_R24.jpg
new file mode 100644
index 0000000..e68b4d6
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_road_wheel_-70_outer_ID02_R24.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_road_wheel_0_center.jpg b/docs/build/images/parts/Right_Spacer_road_wheel_0_center.jpg
new file mode 100644
index 0000000..e4ade3f
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_road_wheel_0_center.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_road_wheel_0_inner_ID01_R24.jpg b/docs/build/images/parts/Right_Spacer_road_wheel_0_inner_ID01_R24.jpg
new file mode 100644
index 0000000..9c8917f
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_road_wheel_0_inner_ID01_R24.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_road_wheel_0_outer_ID02_R24.jpg b/docs/build/images/parts/Right_Spacer_road_wheel_0_outer_ID02_R24.jpg
new file mode 100644
index 0000000..e68b4d6
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_road_wheel_0_outer_ID02_R24.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_road_wheel_70_center.jpg b/docs/build/images/parts/Right_Spacer_road_wheel_70_center.jpg
new file mode 100644
index 0000000..e4ade3f
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_road_wheel_70_center.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_road_wheel_70_inner_ID01_R24.jpg b/docs/build/images/parts/Right_Spacer_road_wheel_70_inner_ID01_R24.jpg
new file mode 100644
index 0000000..e43c5a3
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_road_wheel_70_inner_ID01_R24.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_road_wheel_70_outer_ID02_R24.jpg b/docs/build/images/parts/Right_Spacer_road_wheel_70_outer_ID02_R24.jpg
new file mode 100644
index 0000000..e68b4d6
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_road_wheel_70_outer_ID02_R24.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_tensioner_center.jpg b/docs/build/images/parts/Right_Spacer_tensioner_center.jpg
new file mode 100644
index 0000000..a9f1d97
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_tensioner_center.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_tensioner_inner_ID05_R24.jpg b/docs/build/images/parts/Right_Spacer_tensioner_inner_ID05_R24.jpg
new file mode 100644
index 0000000..1cfc325
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_tensioner_inner_ID05_R24.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_tensioner_outer_ID06_R24.jpg b/docs/build/images/parts/Right_Spacer_tensioner_outer_ID06_R24.jpg
new file mode 100644
index 0000000..403b1b5
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_tensioner_outer_ID06_R24.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_tensioner_retainer_inner_ID07_R24.jpg b/docs/build/images/parts/Right_Spacer_tensioner_retainer_inner_ID07_R24.jpg
new file mode 100644
index 0000000..d16af00
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_tensioner_retainer_inner_ID07_R24.jpg differ
diff --git a/docs/build/images/parts/Right_Spacer_tensioner_retainer_outer_ID08_R24.jpg b/docs/build/images/parts/Right_Spacer_tensioner_retainer_outer_ID08_R24.jpg
new file mode 100644
index 0000000..16c0d88
Binary files /dev/null and b/docs/build/images/parts/Right_Spacer_tensioner_retainer_outer_ID08_R24.jpg differ
diff --git a/docs/build/images/parts/Right_Track_R78_70_Teeth.jpg b/docs/build/images/parts/Right_Track_R78_70_Teeth.jpg
new file mode 100644
index 0000000..22d9198
Binary files /dev/null and b/docs/build/images/parts/Right_Track_R78_70_Teeth.jpg differ
diff --git a/docs/build/images/parts/Right_inner_tensioner_cover_R12_C2.jpg b/docs/build/images/parts/Right_inner_tensioner_cover_R12_C2.jpg
new file mode 100644
index 0000000..b9fd091
Binary files /dev/null and b/docs/build/images/parts/Right_inner_tensioner_cover_R12_C2.jpg differ
diff --git a/docs/build/images/parts/Right_inner_tensioner_slider.jpg b/docs/build/images/parts/Right_inner_tensioner_slider.jpg
new file mode 100644
index 0000000..be93e42
Binary files /dev/null and b/docs/build/images/parts/Right_inner_tensioner_slider.jpg differ
diff --git a/docs/build/images/parts/Right_inner_track_frame_R12_C2.jpg b/docs/build/images/parts/Right_inner_track_frame_R12_C2.jpg
new file mode 100644
index 0000000..c3141db
Binary files /dev/null and b/docs/build/images/parts/Right_inner_track_frame_R12_C2.jpg differ
diff --git a/docs/build/images/parts/SO101_Base.jpg b/docs/build/images/parts/SO101_Base.jpg
new file mode 100644
index 0000000..7153f90
Binary files /dev/null and b/docs/build/images/parts/SO101_Base.jpg differ
diff --git a/docs/build/images/parts/SO101_Base_motor_holder.jpg b/docs/build/images/parts/SO101_Base_motor_holder.jpg
new file mode 100644
index 0000000..8f42f84
Binary files /dev/null and b/docs/build/images/parts/SO101_Base_motor_holder.jpg differ
diff --git a/docs/build/images/parts/SO101_Forearm_cable_clip.jpg b/docs/build/images/parts/SO101_Forearm_cable_clip.jpg
new file mode 100644
index 0000000..af899f8
Binary files /dev/null and b/docs/build/images/parts/SO101_Forearm_cable_clip.jpg differ
diff --git a/docs/build/images/parts/SO101_Shoulder_bracket_cable_clip.jpg b/docs/build/images/parts/SO101_Shoulder_bracket_cable_clip.jpg
new file mode 100644
index 0000000..70ec7ce
Binary files /dev/null and b/docs/build/images/parts/SO101_Shoulder_bracket_cable_clip.jpg differ
diff --git a/docs/build/images/parts/SO101_Shoulder_rotation.jpg b/docs/build/images/parts/SO101_Shoulder_rotation.jpg
new file mode 100644
index 0000000..e0c6b45
Binary files /dev/null and b/docs/build/images/parts/SO101_Shoulder_rotation.jpg differ
diff --git a/docs/build/images/parts/SO101_Upper_arm_cable_clip.jpg b/docs/build/images/parts/SO101_Upper_arm_cable_clip.jpg
new file mode 100644
index 0000000..6512b70
Binary files /dev/null and b/docs/build/images/parts/SO101_Upper_arm_cable_clip.jpg differ
diff --git a/docs/build/images/parts/SO101_Wrist_bracket.jpg b/docs/build/images/parts/SO101_Wrist_bracket.jpg
new file mode 100644
index 0000000..6081d83
Binary files /dev/null and b/docs/build/images/parts/SO101_Wrist_bracket.jpg differ
diff --git a/docs/build/images/parts/SO101_Wrist_cable_clip.jpg b/docs/build/images/parts/SO101_Wrist_cable_clip.jpg
new file mode 100644
index 0000000..573d83f
Binary files /dev/null and b/docs/build/images/parts/SO101_Wrist_cable_clip.jpg differ
diff --git a/docs/build/images/parts/Upper_Cover_R10_Lidar_Extension.jpg b/docs/build/images/parts/Upper_Cover_R10_Lidar_Extension.jpg
new file mode 100644
index 0000000..0231dfc
Binary files /dev/null and b/docs/build/images/parts/Upper_Cover_R10_Lidar_Extension.jpg differ
diff --git a/docs/build/images/parts/Upper_Cover_R10_Rear.jpg b/docs/build/images/parts/Upper_Cover_R10_Rear.jpg
new file mode 100644
index 0000000..5c46989
Binary files /dev/null and b/docs/build/images/parts/Upper_Cover_R10_Rear.jpg differ
diff --git a/docs/build/images/parts/Upper_cover_R9.jpg b/docs/build/images/parts/Upper_cover_R9.jpg
new file mode 100644
index 0000000..d5bf462
Binary files /dev/null and b/docs/build/images/parts/Upper_cover_R9.jpg differ
diff --git a/docs/build/images/parts/XT30_distribution_base.jpg b/docs/build/images/parts/XT30_distribution_base.jpg
new file mode 100644
index 0000000..a28151b
Binary files /dev/null and b/docs/build/images/parts/XT30_distribution_base.jpg differ
diff --git a/docs/build/images/parts/XT30_distribution_lid.jpg b/docs/build/images/parts/XT30_distribution_lid.jpg
new file mode 100644
index 0000000..4449968
Binary files /dev/null and b/docs/build/images/parts/XT30_distribution_lid.jpg differ
diff --git a/docs/build/images/parts/XT30_insulating_separator.jpg b/docs/build/images/parts/XT30_insulating_separator.jpg
new file mode 100644
index 0000000..9e7c438
Binary files /dev/null and b/docs/build/images/parts/XT30_insulating_separator.jpg differ
diff --git a/docs/build/images/print-catalogue.png b/docs/build/images/print-catalogue.png
new file mode 100644
index 0000000..2e27e70
Binary files /dev/null and b/docs/build/images/print-catalogue.png differ
diff --git a/docs/build/images/show-robotics-logo.png b/docs/build/images/show-robotics-logo.png
new file mode 100644
index 0000000..28c31c3
Binary files /dev/null and b/docs/build/images/show-robotics-logo.png differ
diff --git a/docs/build/images/show-robotics-logo.source.json b/docs/build/images/show-robotics-logo.source.json
new file mode 100644
index 0000000..1d4b09c
--- /dev/null
+++ b/docs/build/images/show-robotics-logo.source.json
@@ -0,0 +1,7 @@
+{
+ "source": "https://www.showrobotics.ai/media/logo_nav.png",
+ "brand": "SHOW ROBOTICS",
+ "downloaded": "2026-10-16",
+ "modified": false,
+ "sha256": "15aa21675ec21fe5530f6ed61ead94785532df3099cd843dea91d64e422f5f3d"
+}
diff --git a/docs/build/images/spacer-identification.png b/docs/build/images/spacer-identification.png
new file mode 100644
index 0000000..cd07e7b
Binary files /dev/null and b/docs/build/images/spacer-identification.png differ
diff --git a/docs/build/images/spacer-locations.png b/docs/build/images/spacer-locations.png
new file mode 100644
index 0000000..f08a734
Binary files /dev/null and b/docs/build/images/spacer-locations.png differ
diff --git a/docs/build/images/split-cover-r10.jpg b/docs/build/images/split-cover-r10.jpg
new file mode 100644
index 0000000..9bad450
Binary files /dev/null and b/docs/build/images/split-cover-r10.jpg differ
diff --git a/docs/build/images/split-hull-r92.jpg b/docs/build/images/split-hull-r92.jpg
new file mode 100644
index 0000000..b8ebae4
Binary files /dev/null and b/docs/build/images/split-hull-r92.jpg differ
diff --git a/docs/build/index.html b/docs/build/index.html
new file mode 100644
index 0000000..e1ef3e2
--- /dev/null
+++ b/docs/build/index.html
@@ -0,0 +1,97 @@
+<!doctype html><html lang="en"><head><meta charset="utf-8"><meta name="viewport" content="width=device-width,initial-scale=1"><title>MOSS V0.6 — Build guide</title><meta name="description" content="Build MOSS V0.6: choose your printed parts, order components, and follow the assembly guide with short videos. Download the R92 CAD, STL files and BOM."><link rel="canonical" href="https://www.showrobotics.ai/moss/build/"><meta property="og:title" content="MOSS — Prepare. Watch. Assemble."><meta property="og:description" content="Build MOSS V0.6: choose your printed parts, order components, and follow the assembly guide with short videos. Download the R92 CAD, STL files and BOM."><meta property="og:url" content="https://www.showrobotics.ai/moss/build/"><meta property="og:image" content="https://www.showrobotics.ai/media/og-moss.jpg"><link rel="preload" href="fonts/SpaceGrotesk.ttf" as="font" type="font/ttf" crossorigin><style>@font-face{font-family:"Space Grotesk";src:url("fonts/SpaceGrotesk.ttf") format("truetype");font-style:normal;font-weight:300 700;font-display:swap}
+:root{--studio:#3d576a;--navy:#080f1a;--white:#eaf0ef;--mint:#6cf8c7;--salmon:#ff947e;--muted:rgba(234,240,239,.82);--line:rgba(234,240,239,.22);color-scheme:dark}
+*{box-sizing:border-box}
+html{scroll-behavior:smooth}
+body{margin:0;background:var(--studio);color:var(--white);font:500 16px/1.6 "Space Grotesk",sans-serif}
+a{color:var(--mint);text-decoration:none;text-underline-offset:3px}
+a:hover{text-decoration:underline}
+a:focus-visible,summary:focus-visible,button:focus-visible,select:focus-visible,input:focus-visible{outline:3px solid var(--salmon);outline-offset:4px}
+button,select,input{font:inherit}
+header{position:sticky;top:0;z-index:5;background:rgba(8,15,26,.96);border-bottom:1px solid var(--line);backdrop-filter:blur(14px)}
+nav{max-width:1440px;margin:auto;display:flex;gap:26px;align-items:center;padding:17px 30px;flex-wrap:wrap}
+nav>a{color:var(--white)}
+nav>a:hover{color:var(--mint)}
+.brand-block{display:flex;flex-direction:column;align-items:flex-start;gap:5px;margin-right:auto;flex-shrink:0}
+.brand{display:inline-flex;align-items:center;line-height:1}
+.brand img{width:104px;height:34px;display:block}
+.brand-credit{display:flex;align-items:center;gap:5px;white-space:nowrap;color:var(--white);font-size:9px;font-weight:600;letter-spacing:.55px;line-height:1}
+.brand-credit .by{font-size:10px;font-weight:500;letter-spacing:0;color:var(--muted)}
+.brand-credit img{width:16px;height:16px;display:block;object-fit:contain;filter:brightness(0) invert(1);opacity:.92}
+.tag,.badge{display:inline-block;border-radius:20px;padding:5px 12px;background:var(--navy);font-size:12px;font-weight:600;letter-spacing:.10em;color:var(--mint)}
+.tag{background:var(--salmon);color:var(--navy)}
+.wrap{max-width:1380px;margin:auto;padding:0 30px}
+section{scroll-margin-top:108px;padding:48px 0;border-bottom:1px solid var(--line)}
+h1,h2,h3{font-weight:600;letter-spacing:0}
+h1{font-size:clamp(34px,4.3vw,62px);line-height:1.08;max-width:850px;margin:20px 0}
+h2{font-size:32px;line-height:1.2;margin:0 0 12px}
+h3{font-size:20px;margin:5px 0 12px}
+strong{font-weight:700}
+.muted{color:var(--muted)}
+.intro{max-width:760px;font-size:19px}
+.quick-links{display:flex;flex-wrap:wrap;gap:10px;margin:22px 0}
+.quick-links .pillbtn{font-size:14px;padding:11px 15px}
+.kit-callout{display:flex;align-items:center;justify-content:space-between;gap:20px;flex-wrap:wrap;padding:20px 22px;margin:22px 0;border:1px solid var(--line);border-left:3px solid var(--salmon);border-radius:14px;background:var(--navy)}
+.kit-copy{flex:1 1 300px}
+.kit-copy h2{font-size:20px;margin:0 0 6px}
+.kit-copy h2 a{text-decoration:underline;text-underline-offset:3px}
+.kit-copy p{font-size:15px;margin:0;color:var(--muted)}
+.kit-callout .pillbtn{white-space:nowrap}
+.stats{display:flex;gap:12px;margin:30px 0}
+.stat{background:var(--navy);border:1px solid var(--line);border-radius:14px;padding:16px 22px;flex:1}
+.stat strong{display:block;font-size:25px;font-weight:600}
+.hero{display:grid;grid-template-columns:minmax(0,1.8fr) minmax(270px,1fr);gap:26px;align-items:start;margin-top:30px}
+.card{background:var(--navy);border:1px solid var(--line);border-radius:18px;padding:25px}
+video{width:100%;display:block;background:var(--navy);border-radius:14px;max-height:620px}
+.hero video{border:1px solid var(--line)}
+.kit{padding-left:20px}
+.kit li{margin:9px 0}
+.small{font-size:13px}
+.toolbar{display:flex;gap:14px;align-items:end;flex-wrap:wrap;margin:22px 0}
+.toolbar label{display:grid;gap:5px;font-weight:600;font-size:13px}
+.toolbar select,.toolbar input{background:var(--navy);color:var(--white);border:1px solid #8b9ba8;border-radius:9px;padding:10px 13px;min-width:170px}
+.toolbar input{min-width:250px}
+.toolbar input::placeholder{color:#8b9ba8;opacity:1}
+.pillbtn{background:var(--mint);color:var(--navy);border:1px solid transparent;border-radius:10px;padding:11px 19px;cursor:pointer;display:inline-block;font-weight:600}
+.pillbtn:hover{background:var(--white);text-decoration:none}
+.secondary{background:var(--navy);color:var(--mint);border:1px solid rgba(108,248,199,.55)}
+.secondary:hover{background:var(--mint);color:var(--navy)}
+.step-grid{display:grid;grid-template-columns:repeat(2,minmax(0,1fr));gap:18px}
+.step{background:var(--navy);border:1px solid var(--line);border-radius:16px;overflow:hidden}
+.step[open]{border-color:rgba(108,248,199,.55)}
+.step summary{padding:20px 23px;cursor:pointer;font-weight:600;font-size:18px;list-style:none;display:flex;gap:14px;align-items:start}
+.step summary::after{content:'+';margin-left:auto;color:var(--mint)}
+.step[open] summary::after{content:'−'}
+.num{color:var(--mint);font-size:14px;margin-top:3px}
+.step .content{padding:0 23px 23px}
+.step video{margin:6px 0 18px}
+.step ol{padding-left:23px}
+.step li{margin:9px 0}
+.status{font-size:12px;font-weight:600;color:var(--muted);margin:0 0 15px}
+.table-wrap{overflow:auto}
+table{width:100%;border-collapse:collapse;font-size:14px;margin:15px 0}
+td,th{text-align:left;padding:10px 7px;border-bottom:1px solid var(--line)}
+th{font-size:12px;font-weight:600;text-transform:uppercase;letter-spacing:.10em;color:var(--mint)}
+td:first-child{min-width:150px}
+td:last-child{width:55px}
+.part-grid{display:grid;grid-template-columns:repeat(4,minmax(0,1fr));gap:16px}
+.part{background:var(--navy);border:1px solid var(--line);border-radius:13px;overflow:hidden}
+.part img{display:block;width:100%;aspect-ratio:450/330;object-fit:contain;background:var(--white)}
+.part .label{padding:15px}
+.part h3{font-size:15px;font-weight:600;line-height:1.4;min-height:42px;margin:0 0 9px}
+.part a{font-size:13px;font-weight:600}
+.part .meta{font-size:12px;color:var(--muted);margin-bottom:12px}
+.group{margin:28px 0 38px}
+.group h3{margin-bottom:17px}
+.downloads{display:flex;gap:12px;flex-wrap:wrap;margin:24px 0}
+.note{background:var(--navy);border-left:3px solid var(--mint);border-radius:12px;padding:17px 21px;font-size:14px}
+.doc h2{font-size:23px;margin-top:30px}
+.doc table td:last-child{width:auto}
+.doc p{max-width:950px}
+footer{padding:30px 0 45px;color:var(--muted);font-size:13px}
+.hidden{display:none!important}
+details.source{background:var(--navy);border:1px solid var(--line);border-radius:12px;padding:15px 20px;margin:12px 0}
+.source summary{cursor:pointer;font-weight:600}
+@media(max-width:1000px){nav{gap:18px}.part-grid{grid-template-columns:repeat(3,minmax(0,1fr))}.hero{grid-template-columns:1fr}.step-grid{grid-template-columns:1fr}}
+@media(max-width:650px){nav{padding:12px 18px;gap:13px;font-size:13px}.wrap{padding:0 18px}.part-grid{grid-template-columns:repeat(2,minmax(0,1fr));gap:10px}.stats{flex-wrap:wrap}.stat{min-width:140px;padding:13px}.toolbar select,.toolbar input{min-width:150px;width:100%}h2{font-size:27px}section{padding:35px 0}}
+@media(prefers-reduced-motion:reduce){html{scroll-behavior:auto}}
+</style></head><body><header><nav><div class="brand-block"><a class="brand" href="#top" aria-label="MOSS"><img src="images/moss-wordmark.svg" alt="" width="104" height="34"></a><a class="brand-credit" href="https://www.showrobotics.ai/" aria-label="by SHOW ROBOTICS"><span class="by">by </span><span>SHOW ROBOTICS</span></a></div><a href="#assembly">Build steps</a><a href="#print">Print parts</a><a href="#bom">BOM</a><a href="#files">Files</a></nav></header><main class="wrap"><section id="top"><span class="badge">BUILD GUIDE</span><h1>Prepare. Watch. Assemble.</h1><p class="intro">Print the parts you need and order the components. When you’re ready to build, take it one step at a time and follow the instructions.</p><div class="quick-links" role="navigation" aria-label="Start building"><a class="pillbtn" href="#print">Print catalogue</a><a class="pillbtn secondary" href="#bom">Components &amp; BOM</a><a class="pillbtn secondary" href="#assembly">Assembly guide</a><a class="pillbtn secondary" href="#files">CAD &amp; STL files</a></div><aside class="kit-callout" aria-label="MOSS kits"><div class="kit-copy"><h2>MOSS kits are coming soon on <a href="https://tnkr.ai/">TNKR</a>.</h2><p>Skip printing and sourcing the parts yourself.</p></div><a class="pillbtn" href="https://ak4khuvxkya.typeform.com/to/qaKmXNME">Join the waitlist →</a></aside><div class="stats"><div class="stat"><strong>Version V0.6 - R92</strong></div><div class="stat"><strong>106–109</strong>Catalogue pieces, by options</div></div></section><section id="assembly"><h2>Assembly steps</h2><p class="muted">20 assembly cards. Quantities are for one rover unless a step explicitly says “per wheel”. Computer and camera options are alternatives.</p><div class="toolbar"><label>Show<select id="stepFilter" aria-label="Show"><option value="all">All steps</option><option value="clips">Available clips</option></select></label><a class="pillbtn secondary" href="ASSEMBLY.md">Written guide</a></div><details class="source"><summary>Identify every spacer and lock ring</summary><video controls preload="none" poster="images/01-match-spacer-dots.jpg?v=9fa9e083a6"><source src="videos/01-match-spacer-dots.mp4?v=07ca420aa8" type="video/mp4"></video><p><a href="PART_REFERENCES.md">SP01–SP12 and LK05/LK06/LK08: dimensions and matching STLs</a> · <a href="images/spacer-identification.png?v=2cdf5ce178">Reference sheet</a> · <a href="images/spacer-locations.png?v=5e9f56cf18">Spacer locations</a></p></details><div class="step-grid"><details class="step" data-clip="false"><summary><span class="num">01</span>Choose the hull and fit the inserts</summary><div class="content"><img class="assembly-image option-row" data-scope="HULL_SPLIT" src="images/split-hull-r92.jpg?v=eca13c3c14" alt="Current R92 split hull, motor/computer half and battery/camera half" style="width:100%;border-radius:12px"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="HULL_ONE_PIECE"><td>One-piece hull (one-piece option) <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>Lidar Base <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="HULL_SPLIT"><td>Rear hull — motors and computer <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="HULL_SPLIT"><td>Front hull — battery and camera <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="HULL_SPLIT"><td>Epoxy from the two-part kit, for the hull joint</td><td>As needed</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 heat-set insert, OD4 mm, length 6 mm</td><td>11</td></tr><tr class="option-row" data-scope="HULL_SPLIT"><td>Split hull only: M4 × 15 socket-head screw</td><td>6</td></tr><tr class="option-row" data-scope="HULL_SPLIT"><td>Split hull only: M4 hex nut, 7 mm across flats</td><td>6</td></tr><tr class="option-row" data-scope="HULL_SPLIT"><td>Split hull only: M4 washer, Ø9 × 0.8 mm</td><td>6</td></tr></table></div><ol><li>Choose the one-piece hull or both split halves. For the split hull, dry-fit both halves first, then apply a thin layer of two-part epoxy to the mating faces. Engage the locating pins, seat six nuts from the battery side, and fit six M4 × 15 screws with washers from the motor/computer side. Tighten progressively and let the epoxy cure before installing electronics or the battery.</li><li>Use a soldering iron to fit the inserts: place each insert over its hole, heat it with the iron tip, then gently press it straight into the plastic. Fit four inserts for the cover, four for the arm plate and two for the LiDAR base in the hull.</li><li>Use the same soldering-iron method to fit the remaining insert in the LiDAR base for the carriage lock. Keep the threads clear and let all inserts cool before fitting screws.</li></ol></div></details><details class="step" data-clip="true"><summary><span class="num">02</span>Build the six road wheels</summary><div class="content"><p class="status">Fastening</p><video controls preload="none" poster="images/06-road-wheel-screws.jpg?v=de19930042"><source src="videos/06-road-wheel-screws.mp4?v=f102febba7" type="video/mp4"></video><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>625 road wheel inner half (left + right) <span class="small muted">· PETG</span></td><td>6</td></tr><tr class="option-row" data-scope="COMMON"><td>625 road wheel outer half (left + right) <span class="small muted">· PETG</span></td><td>6</td></tr><tr class="option-row" data-scope="COMMON"><td>SP09 · Spacer road wheel center (left + right) <span class="small muted">· PETG</span></td><td>6</td></tr><tr class="option-row" data-scope="COMMON"><td>625 bearing</td><td>12</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 35 socket-head screw</td><td>18</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 hex nut</td><td>18</td></tr></table></div><ol><li>For each wheel, prepare two printed halves, one SP09 centre spacer, two 625 bearings, three M3 × 35 screws and three M3 nuts.</li><li>Insert each bearing through the open mating face of its wheel half. Do not push it through the smaller outside opening.</li><li>Seat the three nuts in the inner half, position SP09 between the bearings, close the wheel halves, then insert the three screws from the outer face. Repeat six times.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">03</span>Build the two drive wheels</summary><div class="content"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>HEX12 drive wheel inner half (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>HEX12 drive wheel outer half (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>HEX12 metal hub, 6 mm bore, 18 mm length</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 20 socket-head screw</td><td>6</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 hex nut</td><td>6</td></tr></table></div><ol><li>Match the locating feature on each pair of halves.</li><li>Close each wheel with three M3 × 20 screws and three M3 nuts. Keep the HEX12 seat clear.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">04</span>Build the two idler wheels</summary><div class="content"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>22T idler wheel inner half (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>22T idler wheel outer half (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>SP10 · Spacer tensioner center (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>608 bearing</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 25 socket-head screw</td><td>6</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 hex nut</td><td>6</td></tr></table></div><ol><li>For each idler, seat two 608 bearings with SP10 (centre spacer) between them.</li><li>Close the two halves with three M3 × 25 screws and three M3 nuts. Repeat for the other side.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">05</span>Fit the motors and inner bearing retainers</summary><div class="content"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>Motor Mount (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>bearing retainer (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>JGB37-520 motor, 12 V, 90:1, 110 rpm, Hall encoder</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>626 bearing, inner</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>Rigid coupling, 6 mm to6 mm</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>M4 × 20 socket-head screw</td><td>8</td></tr><tr class="option-row" data-scope="COMMON"><td>M4 hex nut</td><td>8</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 8 socket-head screw</td><td>12</td></tr></table></div><ol><li>Use three M3 × 8 screws per motor, without washers. The other six M3 × 8 screws secure the two bearing retainers.</li><li>Put four M4 nuts into each motor-support nut pocket and secure each support to the hull with four M4 × 20 screws.</li><li>Fit the inner bearing retainers with three M3 × 8 screws per side.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">06</span>Fit the inner track frames</summary><div class="content"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>inner track frame (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>M4 × 15 socket-head screw</td><td>6</td></tr><tr class="option-row" data-scope="COMMON"><td>M4 hex nut</td><td>6</td></tr></table></div><ol><li>Fit each inner frame directly against the hull.</li><li>Use three M4 × 15 screws and three M4 nuts per side.</li></ol></div></details><details class="step" data-clip="true"><summary><span class="num">07</span>Fit road-wheel axles and spacer pairs</summary><div class="content"><p class="status">Exploded assembly</p><video controls preload="none" poster="images/02-road-wheel-spacers.jpg?v=2f0bc4653c"><source src="videos/02-road-wheel-spacers.mp4?v=68cdab5069" type="video/mp4"></video><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>SP01 · Spacer road wheel inner ID01 (left + right) <span class="small muted">· PETG</span></td><td>6</td></tr><tr class="option-row" data-scope="COMMON"><td>SP02 · Spacer road wheel outer ID02 (left + right) <span class="small muted">· PETG</span></td><td>6</td></tr><tr class="option-row" data-scope="COMMON"><td>Smooth steel axle, 5 x70 mm finished length</td><td>6</td></tr><tr class="option-row" data-scope="COMMON"><td>LK05 — shaft collar: 5 mm bore, 10 mm outside diameter, 5 mm long</td><td>12</td></tr></table></div><ol><li>Use SP01 (1 dot, 7.5 mm) on the inside and SP02 (2 dots, 5.5 mm) on the outside of every road wheel. SP09 (18 mm, no dots) sits between its bearings.</li><li>Retain each axle with two LK05 collars (5 mm bore). Repeat for all six wheels and check free rotation.</li></ol></div></details><details class="step" data-clip="true"><summary><span class="num">08</span>Fit the drive axles and outer bearing covers</summary><div class="content"><p class="status">Exploded assembly</p><video controls preload="none" poster="images/03-drive-wheel-spacers.jpg?v=90d8525861"><source src="videos/03-drive-wheel-spacers.mp4?v=c4bb671ff6" type="video/mp4"></video><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>SP03 · Spacer drive inner ID03 (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>SP04 · Spacer drive outer HEX12 L12.6 ID04 (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>Cover motor bearing (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>SP11 · Drive bearing to collar spacer (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>Smooth steel axle, 6 x77 mm finished length</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>626 bearing, outer</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>LK06 — shaft collar: 6 mm bore, 11 mm outside diameter, 5 mm long</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 15 socket-head screw</td><td>6</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 hex nut</td><td>6</td></tr></table></div><ol><li>Use SP03 (3 dots, 7.6 mm) on the motor side and SP04 (4 dots, 12.6 mm) on the outer side of the drive wheel.</li><li>Put SP11 (3.5 mm, no dots) between the outer 626 bearing and LK06 (6 mm bore). Secure each bearing cover with three M3 × 15 screws and nuts.</li></ol></div></details><details class="step" data-clip="true"><summary><span class="num">09</span>Fit the idler slides and tensioners</summary><div class="content"><p class="status">Exploded assembly</p><video controls preload="none" poster="images/04-idler-tensioner-spacers.jpg?v=d0356094f9"><source src="videos/04-idler-tensioner-spacers.mp4?v=661cda727e" type="video/mp4"></video><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>inner tensioner cover (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>SP05 · Spacer tensioner inner ID05 (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>SP06 · Spacer tensioner outer ID06 (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>Cover tensioner outer (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>Slider outer (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>inner tensioner slider (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>SP07 · Spacer tensioner retainer inner ID07 (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>SP08 · Spacer tensioner retainer outer ID08 (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>Smooth steel axle, 8 x87 mm finished length</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>LK08 — shaft collar: 8 mm bore, 16 mm outside diameter, 8 mm long</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 15 socket-head screw</td><td>16</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 hex nut</td><td>16</td></tr><tr class="option-row" data-scope="COMMON"><td>M4 × 35 socket-head screw</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>M4 hex nut</td><td>8</td></tr><tr class="option-row" data-scope="COMMON"><td>M4 washer</td><td>4</td></tr></table></div><ol><li>Inside to outside: LK08, SP07, inner slider, SP05, idler wheel with SP10 between its bearings, SP06, outer slider, SP08, LK08. Use two LK08 collars (8 mm bore) per axle.</li><li>Fit each tensioner cover with four M3 × 15 screws and nuts. Use an M4 × 35 adjuster with its washer and two nuts at each of the four tensioners.</li></ol></div></details><details class="step" data-clip="true"><summary><span class="num">10</span>Close the track frames</summary><div class="content"><p class="status">Exploded assembly</p><video controls preload="none" poster="images/05-track-side-reassembly.jpg?v=4689f9bf4f"><source src="videos/05-track-side-reassembly.mp4?v=d41f231eb2" type="video/mp4"></video><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>Outer Track Frame (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>SP12 · Spacer cross member -40 (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>SP12 · Spacer cross member 40 (left + right) <span class="small muted">· PETG</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>M4 × 60 socket-head screw</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>M4 hex nut</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>M4 washer</td><td>4</td></tr></table></div><ol><li>Put the two SP12 cross-member spacers (41 mm, no dots) in each side assembly.</li><li>Fit the outer frame using two M4 × 60 screws, washers and nuts per side.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">11</span>Fit the tracks</summary><div class="content"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>Track R78 70 Teeth (left + right) <span class="small muted">· TPU</span></td><td>2</td></tr></table></div><ol><li>Use the 70-tooth track print masters supplied in this package.</li><li>Seat the central guides in the wheel grooves. Adjust both ends evenly and turn each track by hand.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">12</span>Fit the driver and controller</summary><div class="content"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>Cytron MDD10A Rev2 dual motor driver</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>Adafruit QT Py ESP32-S3, 5426</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>Adafruit Terminal Block BFF, 6495</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>Adafruit INA219 STEMMA QT, 904</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 6 socket-head screw</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>M2 × 6 screw, non-countersunk</td><td>6</td></tr><tr class="option-row" data-scope="COMMON"><td>M2 washer, 0.3 mm thick</td><td>6</td></tr></table></div><ol><li>Secure the MDD10A with four M3 × 6 screws.</li><li>Use four M2 × 6 screws and 0.3 mm washers for the BFF, and two of each for the INA219.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">13</span>Fit the speaker and amplifier</summary><div class="content"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>Speaker, 3 W, 4 ohm, 2-pin connector with 2 mm pitch</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>MAX98357A amplifier module</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>Splash-resistant acoustic membrane, fitted to the inner grille lip</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 6 socket-head screw</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>M2 × 6 screw, non-countersunk</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>M2 washer, 0.5 mm thick</td><td>2</td></tr></table></div><ol><li>Fix the speaker with two M3 × 6 screws above its grille.</li><li>Seat the amplifier on its two mounting posts and two support pillars. Use two M2 × 6 screws with 0.5 mm washers.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">14</span>Fit the computer carrier and servo adapter</summary><div class="content"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMPUTE_PI"><td>Pi Adapter <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="COMPUTE_JETSON"><td>Jetson Adapter <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>Waveshare Bus Servo Adapter A</td><td>1</td></tr><tr class="option-row" data-scope="COMPUTE_PI"><td>Pi only: HAT mounting screws and spacers, supplied with the HAT</td><td>1 kit</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 6 socket-head screw</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 8 socket-head screw</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 washer, 0.5 mm thick</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>M2.5 × 8 screw, non-countersunk</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>M2.5 washer, 0.5 mm thick</td><td>4</td></tr><tr class="option-row" data-scope="COMPUTE_JETSON"><td>Jetson only: M3 × 8 socket-head screw, no washer</td><td>2</td></tr></table></div><ol><li>Choose one carrier: Jetson or Pi.</li><li>Use the two M3 × 6 screws at the front and the two M3 × 8 screws at the rear, with one 0.5 mm washer each.</li><li>For Jetson, secure the two retaining tabs with two M3 × 8 screws, without washers.</li><li>For Pi/HAT, use the screws and spacers supplied with the HAT; prepare this assembly before fitting the carrier in the hull.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">15</span>Fit the camera option</summary><div class="content"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="CAMERA_GEMINI"><td>Gemini Window Adapter <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="CAMERA_REALSENSE"><td>RealSense Insert <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="CAMERA_GEMINI"><td>Gemini Flush Insert <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>RealSense D455 OR Orbbec Gemini 2</td><td>1</td></tr><tr class="option-row" data-scope="CAMERA_REALSENSE"><td>RealSense only: M4 × 10 socket-head screw</td><td>2</td></tr><tr class="option-row" data-scope="CAMERA_GEMINI"><td>Gemini only: M3 × 8 socket-head screw</td><td>2</td></tr></table></div><ol><li>For RealSense, slide the support insert down from the top, then use its two M4 × 10 screws.</li><li>For Gemini, use the flush insert and the window bezel instead. Secure the camera with two M3 × 8 screws; keep the USB opening clear.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">16</span>Fit the LiDAR carriage</summary><div class="content"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>Lidar dovetail carriage <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>SLAMTEC RPLIDAR C1</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 10 socket-head screw</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>M2.5 × 6 socket-head screw</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 20 socket-head screw</td><td>1</td></tr></table></div><ol><li>With the carriage removed, secure the LiDAR base to the hull with two M3 × 10 screws.</li><li>Secure the C1 to the carriage with four M2.5 × 6 screws, slide it onto the base and lock it with the M3 × 20 screw, without a washer, into the M3 insert.</li></ol></div></details><details class="step" data-clip="true"><summary><span class="num">17</span>Fit power distribution and cooling</summary><div class="content"><p class="status">Exploded assembly</p><video controls preload="none" poster="images/07-xt30-power-distribution.jpg?v=88f2121157"><source src="videos/07-xt30-power-distribution.mp4?v=56df6475f3" type="video/mp4"></video><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>XT30 distribution base <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>XT30 distribution lid <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>XT30 insulating separator <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>3010 fan, 12 V</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>12-cell battery pack, 3S4P, with BMS, 110 × 67 × 35 mm</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>Power harness wire, fuse, switches and USB cables</td><td>1</td></tr><tr class="option-row" data-scope="COMPUTE_JETSON"><td>DC male barrel plug, 5.5 × 2.5 mm, 9.5 mm barrel, centre positive — Jetson power</td><td>1</td></tr><tr class="option-row" data-scope="COMPUTE_PI"><td>DC male barrel plug matching the input of the Pi 5 V power supply</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>DC male barrel plug, 5.5 × 2.1 mm — Waveshare Bus Servo Adapter A power</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>DC male barrel plug, 5.5 × 2.1 mm — battery extension to the panel socket</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>XT30 enclosure connectors: 1 input + 4 outputs, from the BOM connector pairs</td><td>5</td></tr><tr class="option-row" data-scope="COMMON"><td>M2.5 × 10 low-head screw, head diameter 5 mm maximum</td><td>4</td></tr></table></div><ol><li>Clip the two fans into their mounts.</li><li>Assemble the XT30 base, insulating separator and lid with four low-head M2.5 × 10 screws.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">18</span>Fit the arm plate and build the arm</summary><div class="content"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>Arm Mounting Platform <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>SO101 Base <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>SO101 Shoulder rotation <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>SO101 Base motor holder <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>SO101 Shoulder bracket cable clip <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>SO101 Upper arm cable clip <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>SO101 Forearm cable clip <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>SO101 Wrist cable clip <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>SO101 Wrist bracket <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>ST3215 12 V serial bus servo</td><td>5</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 10 socket-head screw</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>M4 × 25 countersunk 90-degree screw</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>M4 hex nut</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>Kit screw: M2 × 6, original servo head</td><td>20</td></tr><tr class="option-row" data-scope="COMMON"><td>Kit screw: M3 × 6, original servo head</td><td>37</td></tr></table></div><ol><li>Fit the arm plate with four M3 × 10 socket-head screws. Do not add washers in the counterbores.</li><li>Use the original servo screw packs for the SO101 joints. Keep the camera and servo cables in the printed guides.</li><li>For the wrist-camera cable, heat the printed clips to 70 °C, then close them around the cable.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">19</span>Build the gripper and wrist camera</summary><div class="content"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>NC90 side shield (left + right) <span class="small muted">· PLA</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>NC90 Pinion <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>NC90 Cable guide <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>NC90 jaw extended rack (left + right) <span class="small muted">· PLA</span></td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>Gripper Camera Mount <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>NC90 Base extended rails <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>CF35-12 gripper servo</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>Wrist USB camera for the R30 mount, 21 × 13.5 mm PCB hole pattern</td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>Kit screw: M3 × 6 cross-head ISO7045</td><td>11</td></tr><tr class="option-row" data-scope="COMMON"><td>Kit screw: #1-42 x3/16 inch typeAB</td><td>6</td></tr><tr class="option-row" data-scope="COMMON"><td>M2 × 6 screw, non-countersunk, for wrist camera PCB</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 10 socket-head screw, for wrist camera bracket</td><td>2</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 hex nut, for wrist camera bracket</td><td>2</td></tr></table></div><ol><li>Use the widened NC90 jaws and rails, keeping the two racks in phase.</li><li>Fit the current camera mount. Retain the original gripper screw types.</li><li>Fix the R30 camera bracket to the gripper with two M3 × 10 screws and two M3 nuts, without washers. Fix the matching camera PCB with four M2 × 6 screws.</li></ol></div></details><details class="step" data-clip="false"><summary><span class="num">20</span>Close the hull and fit the bin</summary><div class="content"><img class="assembly-image option-row" data-scope="COVER_SPLIT" src="images/split-cover-r10.jpg?v=f0e722e505" alt="Two-piece upper cover: lower the LiDAR extension into the two dovetail sockets from above" style="width:100%;border-radius:12px"><div class="table-wrap"><table><tr><th>Prepare</th><th>Qty</th></tr><tr class="option-row" data-scope="COMMON"><td>Motor access hatch 10 screws <span class="small muted">· PETG</span></td><td>1</td></tr><tr class="option-row" data-scope="COVER_ONE_PIECE"><td>Upper cover <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COVER_SPLIT"><td>Split cover · rear section <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COVER_SPLIT"><td>Split cover · LiDAR extension <span class="small muted">· PLA</span></td><td>1</td></tr><tr class="option-row" data-scope="COMMON"><td>Magnet, 20 x10 x2 mm</td><td>4</td></tr><tr class="option-row" data-scope="COMMON"><td>Small two-part epoxy adhesive kit, two tubes (resin + hardener), for the magnets and split cover</td><td>1 kit</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 10 countersunk 90-degree screw, head diameter 6.4 mm maximum</td><td>10</td></tr><tr class="option-row" data-scope="COMMON"><td>M3 × 10 countersunk 90-degree screw, head diameter 5.6 mm maximum</td><td>4</td></tr></table></div><ol><li>For the split cover: test-fit the two pieces off the rover. Lower the LiDAR extension from above into both dovetail sockets. Apply a thin layer of two-part epoxy on the mating faces, seat the joint, align the outer surfaces and hold until cured. The glued cover then mounts with the same four screws as the one-piece cover.</li><li>Close the motor hatch with ten M3 × 10 countersunk screws.</li><li>Fit the upper cover with four M3 × 10 countersunk screws.</li><li>Check the polarity of all four magnets, then glue them into their pockets with epoxy. Let the epoxy cure before fitting the bin.</li></ol></div></details></div></section><section id="print"><h2>Your print set</h2><p>Standard/default settings. <strong>15% gyroid infill</strong>; for tracks, <strong>15% standard-profile infill, not gyroid</strong>.</p><div class="toolbar"><label>Hull<select id="hull" aria-label="Hull"><option value="ONE_PIECE">One-piece hull</option><option value="SPLIT">Two-piece hull</option></select></label><label>Cover<select id="cover" aria-label="Cover"><option value="ONE_PIECE">One-piece cover</option><option value="SPLIT">Two-piece cover</option></select></label><label>Computer<select id="compute" aria-label="Computer"><option value="JETSON">Jetson</option><option value="PI">Raspberry Pi 5</option></select></label><label>Depth camera<select id="camera" aria-label="Depth camera"><option value="REALSENSE">RealSense</option><option value="GEMINI">Gemini</option></select></label><label>Find a part<input id="search" type="search" placeholder="Wheel, spacer, hull…"></label><span class="badge" id="partCount">106 pieces</span><a href="images/print-catalogue.png?v=883a7ca543">Group overview image</a></div><p class="small muted">Each preview uses the supplied STL orientation. Choose a hull, cover, camera and computer option. Material is shown on every part. <a href="SPLIT_HULL.md">Two-piece hull</a> · <a href="SPLIT_COVER.md">Two-piece cover</a> · <a href="OUTER_FRAME_PRINTING.md">Outer-frame diagonal placement</a>.</p><div class="group"><h3>Hull options</h3><div class="part-grid"><article class="part" data-scope="HULL_ONE_PIECE" data-search="one-piece hull petg"><img loading="lazy" src="images/parts/Hull_R92.jpg" alt="One-piece hull in its print orientation"><div class="label"><h3>One-piece hull</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Hull_R92.stl">Download STL</a><details class="small"><summary>Orientation</summary>Flat exterior base down</details></div></article><article class="part" data-scope="HULL_SPLIT" data-search="rear hull — motors and computer petg"><img loading="lazy" src="images/parts/Hull_R92_Split_Rear_Motor_Computer.jpg" alt="Rear hull — motors and computer in its print orientation"><div class="label"><h3>Rear hull — motors and computer</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Hull_R92_Split_Rear_Motor_Computer.stl">Download STL</a><details class="small"><summary>Orientation</summary>Flat exterior base down</details></div></article><article class="part" data-scope="HULL_SPLIT" data-search="front hull — battery and camera petg"><img loading="lazy" src="images/parts/Hull_R92_Split_Front_Battery_Camera.jpg" alt="Front hull — battery and camera in its print orientation"><div class="label"><h3>Front hull — battery and camera</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Hull_R92_Split_Front_Battery_Camera.stl">Download STL</a><details class="small"><summary>Orientation</summary>Flat exterior base down</details></div></article></div></div><div class="group"><h3>Outer track frames</h3><p class="small">Print the outer frames separately on the <strong>front-right to rear-left diagonal</strong>. The STLs are already rotated. <a href="OUTER_FRAME_PRINTING.md">Placement guide</a>.</p><img src="images/outer-frame-diagonal.jpg?v=f0801b9ba2" alt="Outer frames placed front-right to rear-left, clear of the front-left excluded zone" style="width:100%;max-width:900px;border-radius:12px"><div class="part-grid"><article class="part" data-scope="COMMON" data-search="left outer track frame petg"><img loading="lazy" src="images/parts/Left_Outer_Track_Frame_R32.jpg" alt="Left Outer Track Frame in its print orientation"><div class="label"><h3>Left Outer Track Frame</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Outer_Track_Frame_R32.stl">Download STL</a><details class="small"><summary>Orientation</summary>Flat, 45 degrees: front-right to rear-left diagonal; centre on the plate. Supplied STL is already rotated. Print each outer frame separately.</details></div></article><article class="part" data-scope="COMMON" data-search="right outer track frame petg"><img loading="lazy" src="images/parts/Right_Outer_Track_Frame_R32.jpg" alt="Right Outer Track Frame in its print orientation"><div class="label"><h3>Right Outer Track Frame</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Outer_Track_Frame_R32.stl">Download STL</a><details class="small"><summary>Orientation</summary>Flat, 45 degrees: front-right to rear-left diagonal; centre on the plate. Supplied STL is already rotated. Print each outer frame separately.</details></div></article><article class="part" data-scope="COMMON" data-search="left inner tensioner cover petg"><img loading="lazy" src="images/parts/Left_inner_tensioner_cover_R12_C2.jpg" alt="Left inner tensioner cover in its print orientation"><div class="label"><h3>Left inner tensioner cover</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_inner_tensioner_cover_R12_C2.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right inner tensioner cover petg"><img loading="lazy" src="images/parts/Right_inner_tensioner_cover_R12_C2.jpg" alt="Right inner tensioner cover in its print orientation"><div class="label"><h3>Right inner tensioner cover</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_inner_tensioner_cover_R12_C2.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article></div></div><div class="group"><h3>Inner frames &amp; spacers</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="left inner track frame petg"><img loading="lazy" src="images/parts/Left_inner_track_frame_R12_C2.jpg" alt="Left inner track frame in its print orientation"><div class="label"><h3>Left inner track frame</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_inner_track_frame_R12_C2.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right inner track frame petg"><img loading="lazy" src="images/parts/Right_inner_track_frame_R12_C2.jpg" alt="Right inner track frame in its print orientation"><div class="label"><h3>Right inner track frame</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_inner_track_frame_R12_C2.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp12 · left spacer cross member -40 petg"><img loading="lazy" src="images/parts/Left_Spacer_cross_member_-40.jpg" alt="SP12 · Left Spacer cross member -40 in its print orientation"><div class="label"><h3>SP12 · Left Spacer cross member -40</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_cross_member_-40.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp12 · left spacer cross member 40 petg"><img loading="lazy" src="images/parts/Left_Spacer_cross_member_40.jpg" alt="SP12 · Left Spacer cross member 40 in its print orientation"><div class="label"><h3>SP12 · Left Spacer cross member 40</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_cross_member_40.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp12 · right spacer cross member -40 petg"><img loading="lazy" src="images/parts/Right_Spacer_cross_member_-40.jpg" alt="SP12 · Right Spacer cross member -40 in its print orientation"><div class="label"><h3>SP12 · Right Spacer cross member -40</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_cross_member_-40.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp12 · right spacer cross member 40 petg"><img loading="lazy" src="images/parts/Right_Spacer_cross_member_40.jpg" alt="SP12 · Right Spacer cross member 40 in its print orientation"><div class="label"><h3>SP12 · Right Spacer cross member 40</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_cross_member_40.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp01 · left spacer road wheel -70 inner id01 petg"><img loading="lazy" src="images/parts/Left_Spacer_road_wheel_-70_inner_ID01_R24.jpg" alt="SP01 · Left Spacer road wheel -70 inner ID01 in its print orientation"><div class="label"><h3>SP01 · Left Spacer road wheel -70 inner ID01</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_-70_inner_ID01_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp01 · left spacer road wheel 0 inner id01 petg"><img loading="lazy" src="images/parts/Left_Spacer_road_wheel_0_inner_ID01_R24.jpg" alt="SP01 · Left Spacer road wheel 0 inner ID01 in its print orientation"><div class="label"><h3>SP01 · Left Spacer road wheel 0 inner ID01</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_0_inner_ID01_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp01 · left spacer road wheel 70 inner id01 petg"><img loading="lazy" src="images/parts/Left_Spacer_road_wheel_70_inner_ID01_R24.jpg" alt="SP01 · Left Spacer road wheel 70 inner ID01 in its print orientation"><div class="label"><h3>SP01 · Left Spacer road wheel 70 inner ID01</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_70_inner_ID01_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp01 · right spacer road wheel -70 inner id01 petg"><img loading="lazy" src="images/parts/Right_Spacer_road_wheel_-70_inner_ID01_R24.jpg" alt="SP01 · Right Spacer road wheel -70 inner ID01 in its print orientation"><div class="label"><h3>SP01 · Right Spacer road wheel -70 inner ID01</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_-70_inner_ID01_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp01 · right spacer road wheel 0 inner id01 petg"><img loading="lazy" src="images/parts/Right_Spacer_road_wheel_0_inner_ID01_R24.jpg" alt="SP01 · Right Spacer road wheel 0 inner ID01 in its print orientation"><div class="label"><h3>SP01 · Right Spacer road wheel 0 inner ID01</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_0_inner_ID01_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp01 · right spacer road wheel 70 inner id01 petg"><img loading="lazy" src="images/parts/Right_Spacer_road_wheel_70_inner_ID01_R24.jpg" alt="SP01 · Right Spacer road wheel 70 inner ID01 in its print orientation"><div class="label"><h3>SP01 · Right Spacer road wheel 70 inner ID01</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_70_inner_ID01_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp05 · left spacer tensioner inner id05 petg"><img loading="lazy" src="images/parts/Left_Spacer_tensioner_inner_ID05_R24.jpg" alt="SP05 · Left Spacer tensioner inner ID05 in its print orientation"><div class="label"><h3>SP05 · Left Spacer tensioner inner ID05</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_inner_ID05_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp05 · right spacer tensioner inner id05 petg"><img loading="lazy" src="images/parts/Right_Spacer_tensioner_inner_ID05_R24.jpg" alt="SP05 · Right Spacer tensioner inner ID05 in its print orientation"><div class="label"><h3>SP05 · Right Spacer tensioner inner ID05</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_inner_ID05_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp03 · left spacer drive inner id03 petg"><img loading="lazy" src="images/parts/Left_Spacer_drive_inner_ID03_R24.jpg" alt="SP03 · Left Spacer drive inner ID03 in its print orientation"><div class="label"><h3>SP03 · Left Spacer drive inner ID03</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_drive_inner_ID03_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp03 · right spacer drive inner id03 petg"><img loading="lazy" src="images/parts/Right_Spacer_drive_inner_ID03_R24.jpg" alt="SP03 · Right Spacer drive inner ID03 in its print orientation"><div class="label"><h3>SP03 · Right Spacer drive inner ID03</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_drive_inner_ID03_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article></div></div><div class="group"><h3>Motor bay &amp; LiDAR mounts</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="motor access hatch 10 screws petg"><img loading="lazy" src="images/parts/02_Motor_access_hatch_10_screws.jpg" alt="Motor access hatch 10 screws in its print orientation"><div class="label"><h3>Motor access hatch 10 screws</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/02_Motor_access_hatch_10_screws.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="motor mount left petg"><img loading="lazy" src="images/parts/Motor_Mount_Left_R90.jpg" alt="Motor Mount Left in its print orientation"><div class="label"><h3>Motor Mount Left</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Motor_Mount_Left_R90.stl">Download STL</a><details class="small"><summary>Orientation</summary>Broad motor-facing flat face down</details></div></article><article class="part" data-scope="COMMON" data-search="motor mount right petg"><img loading="lazy" src="images/parts/Motor_Mount_Right_R90.jpg" alt="Motor Mount Right in its print orientation"><div class="label"><h3>Motor Mount Right</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Motor_Mount_Right_R90.stl">Download STL</a><details class="small"><summary>Orientation</summary>Broad motor-facing flat face down</details></div></article><article class="part" data-scope="COMMON" data-search="left bearing retainer petg"><img loading="lazy" src="images/parts/05_Left_bearing_retainer.jpg" alt="Left bearing retainer in its print orientation"><div class="label"><h3>Left bearing retainer</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/05_Left_bearing_retainer.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right bearing retainer petg"><img loading="lazy" src="images/parts/06_Right_bearing_retainer.jpg" alt="Right bearing retainer in its print orientation"><div class="label"><h3>Right bearing retainer</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/06_Right_bearing_retainer.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="lidar base petg"><img loading="lazy" src="images/parts/Lidar_Base_R84.jpg" alt="Lidar Base in its print orientation"><div class="label"><h3>Lidar Base</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Lidar_Base_R84.stl">Download STL</a><details class="small"><summary>Orientation</summary>Flat base down</details></div></article><article class="part" data-scope="COMMON" data-search="lidar dovetail carriage petg"><img loading="lazy" src="images/parts/Lidar_dovetail_carriage_R21.jpg" alt="Lidar dovetail carriage in its print orientation"><div class="label"><h3>Lidar dovetail carriage</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Lidar_dovetail_carriage_R21.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article></div></div><div class="group"><h3>Outer spacers &amp; covers</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="sp02 · left spacer road wheel -70 outer id02 petg"><img loading="lazy" src="images/parts/Left_Spacer_road_wheel_-70_outer_ID02_R24.jpg" alt="SP02 · Left Spacer road wheel -70 outer ID02 in its print orientation"><div class="label"><h3>SP02 · Left Spacer road wheel -70 outer ID02</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_-70_outer_ID02_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp02 · left spacer road wheel 0 outer id02 petg"><img loading="lazy" src="images/parts/Left_Spacer_road_wheel_0_outer_ID02_R24.jpg" alt="SP02 · Left Spacer road wheel 0 outer ID02 in its print orientation"><div class="label"><h3>SP02 · Left Spacer road wheel 0 outer ID02</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_0_outer_ID02_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp02 · left spacer road wheel 70 outer id02 petg"><img loading="lazy" src="images/parts/Left_Spacer_road_wheel_70_outer_ID02_R24.jpg" alt="SP02 · Left Spacer road wheel 70 outer ID02 in its print orientation"><div class="label"><h3>SP02 · Left Spacer road wheel 70 outer ID02</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_70_outer_ID02_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp02 · right spacer road wheel -70 outer id02 petg"><img loading="lazy" src="images/parts/Right_Spacer_road_wheel_-70_outer_ID02_R24.jpg" alt="SP02 · Right Spacer road wheel -70 outer ID02 in its print orientation"><div class="label"><h3>SP02 · Right Spacer road wheel -70 outer ID02</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_-70_outer_ID02_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp02 · right spacer road wheel 0 outer id02 petg"><img loading="lazy" src="images/parts/Right_Spacer_road_wheel_0_outer_ID02_R24.jpg" alt="SP02 · Right Spacer road wheel 0 outer ID02 in its print orientation"><div class="label"><h3>SP02 · Right Spacer road wheel 0 outer ID02</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_0_outer_ID02_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp02 · right spacer road wheel 70 outer id02 petg"><img loading="lazy" src="images/parts/Right_Spacer_road_wheel_70_outer_ID02_R24.jpg" alt="SP02 · Right Spacer road wheel 70 outer ID02 in its print orientation"><div class="label"><h3>SP02 · Right Spacer road wheel 70 outer ID02</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_70_outer_ID02_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp06 · left spacer tensioner outer id06 petg"><img loading="lazy" src="images/parts/Left_Spacer_tensioner_outer_ID06_R24.jpg" alt="SP06 · Left Spacer tensioner outer ID06 in its print orientation"><div class="label"><h3>SP06 · Left Spacer tensioner outer ID06</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_outer_ID06_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp06 · right spacer tensioner outer id06 petg"><img loading="lazy" src="images/parts/Right_Spacer_tensioner_outer_ID06_R24.jpg" alt="SP06 · Right Spacer tensioner outer ID06 in its print orientation"><div class="label"><h3>SP06 · Right Spacer tensioner outer ID06</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_outer_ID06_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp04 · left spacer drive outer hex12 l12.6 id04 petg"><img loading="lazy" src="images/parts/Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24.jpg" alt="SP04 · Left Spacer drive outer HEX12 L12.6 ID04 in its print orientation"><div class="label"><h3>SP04 · Left Spacer drive outer HEX12 L12.6 ID04</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp04 · right spacer drive outer hex12 l12.6 id04 petg"><img loading="lazy" src="images/parts/Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24.jpg" alt="SP04 · Right Spacer drive outer HEX12 L12.6 ID04 in its print orientation"><div class="label"><h3>SP04 · Right Spacer drive outer HEX12 L12.6 ID04</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="left cover tensioner outer petg"><img loading="lazy" src="images/parts/Left_Cover_tensioner_outer.jpg" alt="Left Cover tensioner outer in its print orientation"><div class="label"><h3>Left Cover tensioner outer</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Cover_tensioner_outer.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right cover tensioner outer petg"><img loading="lazy" src="images/parts/Right_Cover_tensioner_outer.jpg" alt="Right Cover tensioner outer in its print orientation"><div class="label"><h3>Right Cover tensioner outer</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Cover_tensioner_outer.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article></div></div><div class="group"><h3>Drive &amp; idler wheels</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="left 22t idler wheel inner half petg"><img loading="lazy" src="images/parts/Left_22T_idler_wheel_inner_half_R13.jpg" alt="Left 22T idler wheel inner half in its print orientation"><div class="label"><h3>Left 22T idler wheel inner half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_22T_idler_wheel_inner_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="left 22t idler wheel outer half petg"><img loading="lazy" src="images/parts/Left_22T_idler_wheel_outer_half_R13.jpg" alt="Left 22T idler wheel outer half in its print orientation"><div class="label"><h3>Left 22T idler wheel outer half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_22T_idler_wheel_outer_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right 22t idler wheel inner half petg"><img loading="lazy" src="images/parts/Right_22T_idler_wheel_inner_half_R13.jpg" alt="Right 22T idler wheel inner half in its print orientation"><div class="label"><h3>Right 22T idler wheel inner half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_22T_idler_wheel_inner_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right 22t idler wheel outer half petg"><img loading="lazy" src="images/parts/Right_22T_idler_wheel_outer_half_R13.jpg" alt="Right 22T idler wheel outer half in its print orientation"><div class="label"><h3>Right 22T idler wheel outer half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_22T_idler_wheel_outer_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="left hex12 drive wheel inner half petg"><img loading="lazy" src="images/parts/Left_HEX12_drive_wheel_inner_half_R13.jpg" alt="Left HEX12 drive wheel inner half in its print orientation"><div class="label"><h3>Left HEX12 drive wheel inner half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_HEX12_drive_wheel_inner_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="left hex12 drive wheel outer half petg"><img loading="lazy" src="images/parts/Left_HEX12_drive_wheel_outer_half_R13.jpg" alt="Left HEX12 drive wheel outer half in its print orientation"><div class="label"><h3>Left HEX12 drive wheel outer half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_HEX12_drive_wheel_outer_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right hex12 drive wheel inner half petg"><img loading="lazy" src="images/parts/Right_HEX12_drive_wheel_inner_half_R13.jpg" alt="Right HEX12 drive wheel inner half in its print orientation"><div class="label"><h3>Right HEX12 drive wheel inner half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_HEX12_drive_wheel_inner_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right hex12 drive wheel outer half petg"><img loading="lazy" src="images/parts/Right_HEX12_drive_wheel_outer_half_R13.jpg" alt="Right HEX12 drive wheel outer half in its print orientation"><div class="label"><h3>Right HEX12 drive wheel outer half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_HEX12_drive_wheel_outer_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article></div></div><div class="group"><h3>Road wheels</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="left 625 road wheel -70 inner half petg"><img loading="lazy" src="images/parts/Left_625_road_wheel_-70_inner_half_R13.jpg" alt="Left 625 road wheel -70 inner half in its print orientation"><div class="label"><h3>Left 625 road wheel -70 inner half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_625_road_wheel_-70_inner_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="left 625 road wheel -70 outer half petg"><img loading="lazy" src="images/parts/Left_625_road_wheel_-70_outer_half_R13.jpg" alt="Left 625 road wheel -70 outer half in its print orientation"><div class="label"><h3>Left 625 road wheel -70 outer half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_625_road_wheel_-70_outer_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="left 625 road wheel 70 inner half petg"><img loading="lazy" src="images/parts/Left_625_road_wheel_70_inner_half_R13.jpg" alt="Left 625 road wheel 70 inner half in its print orientation"><div class="label"><h3>Left 625 road wheel 70 inner half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_625_road_wheel_70_inner_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="left 625 road wheel 70 outer half petg"><img loading="lazy" src="images/parts/Left_625_road_wheel_70_outer_half_R13.jpg" alt="Left 625 road wheel 70 outer half in its print orientation"><div class="label"><h3>Left 625 road wheel 70 outer half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_625_road_wheel_70_outer_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right 625 road wheel -70 inner half petg"><img loading="lazy" src="images/parts/Right_625_road_wheel_-70_inner_half_R13.jpg" alt="Right 625 road wheel -70 inner half in its print orientation"><div class="label"><h3>Right 625 road wheel -70 inner half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_625_road_wheel_-70_inner_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right 625 road wheel -70 outer half petg"><img loading="lazy" src="images/parts/Right_625_road_wheel_-70_outer_half_R13.jpg" alt="Right 625 road wheel -70 outer half in its print orientation"><div class="label"><h3>Right 625 road wheel -70 outer half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_625_road_wheel_-70_outer_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right 625 road wheel 70 inner half petg"><img loading="lazy" src="images/parts/Right_625_road_wheel_70_inner_half_R13.jpg" alt="Right 625 road wheel 70 inner half in its print orientation"><div class="label"><h3>Right 625 road wheel 70 inner half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_625_road_wheel_70_inner_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right 625 road wheel 70 outer half petg"><img loading="lazy" src="images/parts/Right_625_road_wheel_70_outer_half_R13.jpg" alt="Right 625 road wheel 70 outer half in its print orientation"><div class="label"><h3>Right 625 road wheel 70 outer half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_625_road_wheel_70_outer_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="left 625 road wheel 0 inner half petg"><img loading="lazy" src="images/parts/Left_625_road_wheel_0_inner_half_R13.jpg" alt="Left 625 road wheel 0 inner half in its print orientation"><div class="label"><h3>Left 625 road wheel 0 inner half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_625_road_wheel_0_inner_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="left 625 road wheel 0 outer half petg"><img loading="lazy" src="images/parts/Left_625_road_wheel_0_outer_half_R13.jpg" alt="Left 625 road wheel 0 outer half in its print orientation"><div class="label"><h3>Left 625 road wheel 0 outer half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_625_road_wheel_0_outer_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right 625 road wheel 0 inner half petg"><img loading="lazy" src="images/parts/Right_625_road_wheel_0_inner_half_R13.jpg" alt="Right 625 road wheel 0 inner half in its print orientation"><div class="label"><h3>Right 625 road wheel 0 inner half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_625_road_wheel_0_inner_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right 625 road wheel 0 outer half petg"><img loading="lazy" src="images/parts/Right_625_road_wheel_0_outer_half_R13.jpg" alt="Right 625 road wheel 0 outer half in its print orientation"><div class="label"><h3>Right 625 road wheel 0 outer half</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_625_road_wheel_0_outer_half_R13.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article></div></div><div class="group"><h3>Power distribution housing</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="xt30 distribution base petg"><img loading="lazy" src="images/parts/XT30_distribution_base.jpg" alt="XT30 distribution base in its print orientation"><div class="label"><h3>XT30 distribution base</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/XT30_distribution_base.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="xt30 distribution lid petg"><img loading="lazy" src="images/parts/XT30_distribution_lid.jpg" alt="XT30 distribution lid in its print orientation"><div class="label"><h3>XT30 distribution lid</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/XT30_distribution_lid.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="xt30 insulating separator petg"><img loading="lazy" src="images/parts/XT30_insulating_separator.jpg" alt="XT30 insulating separator in its print orientation"><div class="label"><h3>XT30 insulating separator</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/XT30_insulating_separator.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article></div></div><div class="group"><h3>Slides, retainers &amp; spacers</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="left slider outer petg"><img loading="lazy" src="images/parts/Left_Slider_outer.jpg" alt="Left Slider outer in its print orientation"><div class="label"><h3>Left Slider outer</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Slider_outer.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="left cover motor bearing petg"><img loading="lazy" src="images/parts/Left_Cover_motor_bearing.jpg" alt="Left Cover motor bearing in its print orientation"><div class="label"><h3>Left Cover motor bearing</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Cover_motor_bearing.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right slider outer petg"><img loading="lazy" src="images/parts/Right_Slider_outer.jpg" alt="Right Slider outer in its print orientation"><div class="label"><h3>Right Slider outer</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Slider_outer.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right cover motor bearing petg"><img loading="lazy" src="images/parts/Right_Cover_motor_bearing.jpg" alt="Right Cover motor bearing in its print orientation"><div class="label"><h3>Right Cover motor bearing</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Cover_motor_bearing.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="left inner tensioner slider petg"><img loading="lazy" src="images/parts/Left_inner_tensioner_slider.jpg" alt="Left inner tensioner slider in its print orientation"><div class="label"><h3>Left inner tensioner slider</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_inner_tensioner_slider.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="right inner tensioner slider petg"><img loading="lazy" src="images/parts/Right_inner_tensioner_slider.jpg" alt="Right inner tensioner slider in its print orientation"><div class="label"><h3>Right inner tensioner slider</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_inner_tensioner_slider.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp07 · left spacer tensioner retainer inner id07 petg"><img loading="lazy" src="images/parts/Left_Spacer_tensioner_retainer_inner_ID07_R24.jpg" alt="SP07 · Left Spacer tensioner retainer inner ID07 in its print orientation"><div class="label"><h3>SP07 · Left Spacer tensioner retainer inner ID07</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_retainer_inner_ID07_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp08 · left spacer tensioner retainer outer id08 petg"><img loading="lazy" src="images/parts/Left_Spacer_tensioner_retainer_outer_ID08_R24.jpg" alt="SP08 · Left Spacer tensioner retainer outer ID08 in its print orientation"><div class="label"><h3>SP08 · Left Spacer tensioner retainer outer ID08</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_retainer_outer_ID08_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp10 · left spacer tensioner center petg"><img loading="lazy" src="images/parts/Left_Spacer_tensioner_center.jpg" alt="SP10 · Left Spacer tensioner center in its print orientation"><div class="label"><h3>SP10 · Left Spacer tensioner center</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_tensioner_center.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp07 · right spacer tensioner retainer inner id07 petg"><img loading="lazy" src="images/parts/Right_Spacer_tensioner_retainer_inner_ID07_R24.jpg" alt="SP07 · Right Spacer tensioner retainer inner ID07 in its print orientation"><div class="label"><h3>SP07 · Right Spacer tensioner retainer inner ID07</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_retainer_inner_ID07_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp08 · right spacer tensioner retainer outer id08 petg"><img loading="lazy" src="images/parts/Right_Spacer_tensioner_retainer_outer_ID08_R24.jpg" alt="SP08 · Right Spacer tensioner retainer outer ID08 in its print orientation"><div class="label"><h3>SP08 · Right Spacer tensioner retainer outer ID08</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_retainer_outer_ID08_R24.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp10 · right spacer tensioner center petg"><img loading="lazy" src="images/parts/Right_Spacer_tensioner_center.jpg" alt="SP10 · Right Spacer tensioner center in its print orientation"><div class="label"><h3>SP10 · Right Spacer tensioner center</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_tensioner_center.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp09 · left spacer road wheel -70 center petg"><img loading="lazy" src="images/parts/Left_Spacer_road_wheel_-70_center.jpg" alt="SP09 · Left Spacer road wheel -70 center in its print orientation"><div class="label"><h3>SP09 · Left Spacer road wheel -70 center</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_-70_center.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp09 · left spacer road wheel 0 center petg"><img loading="lazy" src="images/parts/Left_Spacer_road_wheel_0_center.jpg" alt="SP09 · Left Spacer road wheel 0 center in its print orientation"><div class="label"><h3>SP09 · Left Spacer road wheel 0 center</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_0_center.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp09 · left spacer road wheel 70 center petg"><img loading="lazy" src="images/parts/Left_Spacer_road_wheel_70_center.jpg" alt="SP09 · Left Spacer road wheel 70 center in its print orientation"><div class="label"><h3>SP09 · Left Spacer road wheel 70 center</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Spacer_road_wheel_70_center.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp09 · right spacer road wheel -70 center petg"><img loading="lazy" src="images/parts/Right_Spacer_road_wheel_-70_center.jpg" alt="SP09 · Right Spacer road wheel -70 center in its print orientation"><div class="label"><h3>SP09 · Right Spacer road wheel -70 center</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_-70_center.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp09 · right spacer road wheel 0 center petg"><img loading="lazy" src="images/parts/Right_Spacer_road_wheel_0_center.jpg" alt="SP09 · Right Spacer road wheel 0 center in its print orientation"><div class="label"><h3>SP09 · Right Spacer road wheel 0 center</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_0_center.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp09 · right spacer road wheel 70 center petg"><img loading="lazy" src="images/parts/Right_Spacer_road_wheel_70_center.jpg" alt="SP09 · Right Spacer road wheel 70 center in its print orientation"><div class="label"><h3>SP09 · Right Spacer road wheel 70 center</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Spacer_road_wheel_70_center.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp11 · left drive bearing to collar spacer petg"><img loading="lazy" src="images/parts/Left_Drive_bearing_to_collar_spacer_R12_C1.jpg" alt="SP11 · Left Drive bearing to collar spacer in its print orientation"><div class="label"><h3>SP11 · Left Drive bearing to collar spacer</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Drive_bearing_to_collar_spacer_R12_C1.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="sp11 · right drive bearing to collar spacer petg"><img loading="lazy" src="images/parts/Right_Drive_bearing_to_collar_spacer_R12_C1.jpg" alt="SP11 · Right Drive bearing to collar spacer in its print orientation"><div class="label"><h3>SP11 · Right Drive bearing to collar spacer</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Drive_bearing_to_collar_spacer_R12_C1.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article></div></div><div class="group"><h3>Upper cover</h3><div class="part-grid"><article class="part" data-scope="COVER_ONE_PIECE" data-search="one-piece upper cover pla"><img loading="lazy" src="images/parts/Upper_cover_R9.jpg" alt="One-piece upper cover in its print orientation"><div class="label"><h3>One-piece upper cover</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Upper_cover_R9.stl">Download STL</a><details class="small"><summary>Orientation</summary>Rear edge down</details></div></article><article class="part" data-scope="COVER_SPLIT" data-search="split cover · rear section pla"><img loading="lazy" src="images/parts/Upper_Cover_R10_Rear.jpg" alt="Split cover · rear section in its print orientation"><div class="label"><h3>Split cover · rear section</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Upper_Cover_R10_Rear.stl">Download STL</a><details class="small"><summary>Orientation</summary>Rear edge down; supplied STL orientation</details></div></article><article class="part" data-scope="COVER_SPLIT" data-search="split cover · lidar extension pla"><img loading="lazy" src="images/parts/Upper_Cover_R10_Lidar_Extension.jpg" alt="Split cover · LiDAR extension in its print orientation"><div class="label"><h3>Split cover · LiDAR extension</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Upper_Cover_R10_Lidar_Extension.stl">Download STL</a><details class="small"><summary>Orientation</summary>Front edge down; supplied STL orientation</details></div></article></div></div><div class="group"><h3>Bin</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="bin 20x10x2 magnet pockets pla"><img loading="lazy" src="images/parts/14_Bin_20x10x2_magnet_pockets.jpg" alt="Bin 20x10x2 magnet pockets in its print orientation"><div class="label"><h3>Bin 20x10x2 magnet pockets</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/14_Bin_20x10x2_magnet_pockets.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article></div></div><div class="group"><h3>Arm plate</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="arm mounting platform pla"><img loading="lazy" src="images/parts/Arm_Mounting_Platform_R22.jpg" alt="Arm Mounting Platform in its print orientation"><div class="label"><h3>Arm Mounting Platform</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Arm_Mounting_Platform_R22.stl">Download STL</a><details class="small"><summary>Orientation</summary>Flat underside down</details></div></article></div></div><div class="group"><h3>Arm base &amp; shoulder</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="so101 base pla"><img loading="lazy" src="images/parts/SO101_Base.jpg" alt="SO101 Base in its print orientation"><div class="label"><h3>SO101 Base</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Base.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="so101 shoulder rotation pla"><img loading="lazy" src="images/parts/SO101_Shoulder_rotation.jpg" alt="SO101 Shoulder rotation in its print orientation"><div class="label"><h3>SO101 Shoulder rotation</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Shoulder_rotation.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="so101 base motor holder pla"><img loading="lazy" src="images/parts/SO101_Base_motor_holder.jpg" alt="SO101 Base motor holder in its print orientation"><div class="label"><h3>SO101 Base motor holder</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Base_motor_holder.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="so101 shoulder bracket cable clip pla"><img loading="lazy" src="images/parts/SO101_Shoulder_bracket_cable_clip.jpg" alt="SO101 Shoulder bracket cable clip in its print orientation"><div class="label"><h3>SO101 Shoulder bracket cable clip</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Shoulder_bracket_cable_clip.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article></div></div><div class="group"><h3>Arm links</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="so101 upper arm cable clip pla"><img loading="lazy" src="images/parts/SO101_Upper_arm_cable_clip.jpg" alt="SO101 Upper arm cable clip in its print orientation"><div class="label"><h3>SO101 Upper arm cable clip</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Upper_arm_cable_clip.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="so101 forearm cable clip pla"><img loading="lazy" src="images/parts/SO101_Forearm_cable_clip.jpg" alt="SO101 Forearm cable clip in its print orientation"><div class="label"><h3>SO101 Forearm cable clip</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Forearm_cable_clip.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="so101 wrist cable clip pla"><img loading="lazy" src="images/parts/SO101_Wrist_cable_clip.jpg" alt="SO101 Wrist cable clip in its print orientation"><div class="label"><h3>SO101 Wrist cable clip</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Wrist_cable_clip.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="so101 wrist bracket pla"><img loading="lazy" src="images/parts/SO101_Wrist_bracket.jpg" alt="SO101 Wrist bracket in its print orientation"><div class="label"><h3>SO101 Wrist bracket</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/SO101_Wrist_bracket.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article></div></div><div class="group"><h3>Gripper &amp; wrist camera</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="nc90 right side shield pla"><img loading="lazy" src="images/parts/NC90_Right_side_shield.jpg" alt="NC90 Right side shield in its print orientation"><div class="label"><h3>NC90 Right side shield</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Right_side_shield.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="nc90 pinion pla"><img loading="lazy" src="images/parts/NC90_Pinion.jpg" alt="NC90 Pinion in its print orientation"><div class="label"><h3>NC90 Pinion</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Pinion.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="nc90 cable guide pla"><img loading="lazy" src="images/parts/NC90_Cable_guide.jpg" alt="NC90 Cable guide in its print orientation"><div class="label"><h3>NC90 Cable guide</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Cable_guide.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="nc90 right jaw extended rack pla"><img loading="lazy" src="images/parts/NC90_Right_jaw_extended_rack.jpg" alt="NC90 Right jaw extended rack in its print orientation"><div class="label"><h3>NC90 Right jaw extended rack</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Right_jaw_extended_rack.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="gripper camera mount pla"><img loading="lazy" src="images/parts/Gripper_Camera_Mount_R30.jpg" alt="Gripper Camera Mount in its print orientation"><div class="label"><h3>Gripper Camera Mount</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Gripper_Camera_Mount_R30.stl">Download STL</a><details class="small"><summary>Orientation</summary>Supplied print orientation for current IMX335 B mount</details></div></article><article class="part" data-scope="COMMON" data-search="nc90 left side shield pla"><img loading="lazy" src="images/parts/NC90_Left_side_shield.jpg" alt="NC90 Left side shield in its print orientation"><div class="label"><h3>NC90 Left side shield</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Left_side_shield.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="nc90 base extended rails pla"><img loading="lazy" src="images/parts/NC90_Base_extended_rails.jpg" alt="NC90 Base extended rails in its print orientation"><div class="label"><h3>NC90 Base extended rails</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Base_extended_rails.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article><article class="part" data-scope="COMMON" data-search="nc90 left jaw extended rack pla"><img loading="lazy" src="images/parts/NC90_Left_jaw_extended_rack.jpg" alt="NC90 Left jaw extended rack in its print orientation"><div class="label"><h3>NC90 Left jaw extended rack</h3><div class="meta">PLA · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/NC90_Left_jaw_extended_rack.stl">Download STL</a><details class="small"><summary>Orientation</summary>Existing print contact face retained</details></div></article></div></div><div class="group"><h3>Left track</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="left track r78 70 teeth tpu"><img loading="lazy" src="images/parts/Left_Track_R78_70_Teeth.jpg" alt="Left Track R78 70 Teeth in its print orientation"><div class="label"><h3>Left Track R78 70 Teeth</h3><div class="meta">TPU · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Left_Track_R78_70_Teeth.stl">Download STL</a><details class="small"><summary>Orientation</summary>Flat side down; 70 teeth, 6.8 mm central guides</details></div></article></div></div><div class="group"><h3>Right track</h3><div class="part-grid"><article class="part" data-scope="COMMON" data-search="right track r78 70 teeth tpu"><img loading="lazy" src="images/parts/Right_Track_R78_70_Teeth.jpg" alt="Right Track R78 70 Teeth in its print orientation"><div class="label"><h3>Right Track R78 70 Teeth</h3><div class="meta">TPU · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Right_Track_R78_70_Teeth.stl">Download STL</a><details class="small"><summary>Orientation</summary>Flat side down; same printable part as left</details></div></article></div></div><div class="group"><h3>Jetson carrier</h3><div class="part-grid"><article class="part" data-scope="COMPUTE_JETSON" data-search="jetson adapter petg"><img loading="lazy" src="images/parts/Jetson_Adapter_R87.jpg" alt="Jetson Adapter in its print orientation"><div class="label"><h3>Jetson Adapter</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Jetson_Adapter_R87.stl">Download STL</a><details class="small"><summary>Orientation</summary>Flat underside down</details></div></article></div></div><div class="group"><h3>Pi carrier</h3><div class="part-grid"><article class="part" data-scope="COMPUTE_PI" data-search="pi adapter petg"><img loading="lazy" src="images/parts/Pi_Adapter_R87.jpg" alt="Pi Adapter in its print orientation"><div class="label"><h3>Pi Adapter</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Pi_Adapter_R87.stl">Download STL</a><details class="small"><summary>Orientation</summary>Flat underside down</details></div></article></div></div><div class="group"><h3>Gemini inserts</h3><div class="part-grid"><article class="part" data-scope="CAMERA_GEMINI" data-search="gemini window adapter petg"><img loading="lazy" src="images/parts/Gemini_Window_Adapter_R89.jpg" alt="Gemini Window Adapter in its print orientation"><div class="label"><h3>Gemini Window Adapter</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Gemini_Window_Adapter_R89.stl">Download STL</a><details class="small"><summary>Orientation</summary>Flat front frame down; curved ends retained</details></div></article><article class="part" data-scope="CAMERA_GEMINI" data-search="gemini flush insert petg"><img loading="lazy" src="images/parts/Gemini_Flush_Insert_R72.jpg" alt="Gemini Flush Insert in its print orientation"><div class="label"><h3>Gemini Flush Insert</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/Gemini_Flush_Insert_R72.stl">Download STL</a><details class="small"><summary>Orientation</summary>Rear flat face down; plain top-entry key</details></div></article></div></div><div class="group"><h3>RealSense insert</h3><div class="part-grid"><article class="part" data-scope="CAMERA_REALSENSE" data-search="realsense insert petg"><img loading="lazy" src="images/parts/RealSense_Insert_R72.jpg" alt="RealSense Insert in its print orientation"><div class="label"><h3>RealSense Insert</h3><div class="meta">PETG · Qty 1</div><a download href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/RealSense_Insert_R72.stl">Download STL</a><details class="small"><summary>Orientation</summary>Rear flat face down; top-entry screw-support key</details></div></article></div></div></section><section id="bom"><h2>What to buy</h2><p class="muted">Parts and hardware for one rover using separate modules. Choose one computer and one camera option.</p><details class="source"><summary>Open the bill of materials</summary><div class="doc"><p>One rover, using separate off-the-shelf modules. Choose one computer and one depth camera.</p><h2>Control and audio</h2><div class="table-wrap"><table><tr><td>Item</td><td>Quantity</td><td>Note</td></tr><tr><td>Adafruit QT Py ESP32-S3, 8 MB flash, no PSRAM, ref.5426</td><td>1</td><td></td></tr><tr><td>Adafruit Terminal Block BFF, ref.6495</td><td>1</td><td></td></tr><tr><td>Adafruit INA219 STEMMA QT, ref.904</td><td>1</td><td></td></tr><tr><td>STEMMA QT cable, 300 mm, ref.5384</td><td>1</td><td></td></tr><tr><td>Cytron MDD10A Rev2 dual motor driver</td><td>1</td><td></td></tr><tr><td>Waveshare Bus Servo Adapter A</td><td>1</td><td></td></tr><tr><td>MAX98357A amplifier module</td><td>1</td><td></td></tr><tr><td>Speaker, 3 W, 4 ohm</td><td>1</td><td></td></tr><tr><td>Acoustic splash membrane and compatible adhesive</td><td>1</td><td>EPTFE or non woven fabric membrane.</td></tr></table></div><h2>Drive</h2><div class="table-wrap"><table><tr><td>Item</td><td>Quantity</td><td>Note</td></tr><tr><td>JGB37-520, 12 V, 90:1, 110 rpm, Hall encoder, 6 mm D-shaft</td><td>2</td><td></td></tr><tr><td>625 bearing</td><td>12</td><td></td></tr><tr><td>608 bearing</td><td>4</td><td></td></tr><tr><td>626 bearing</td><td>4</td><td></td></tr><tr><td>LK05 — shaft collar, 5 mm bore, Ø10 × 5 mm</td><td>12</td><td></td></tr><tr><td>LK06 — shaft collar, 6 mm bore, Ø11 × 5 mm</td><td>2</td><td></td></tr><tr><td>LK08 — shaft collar, 8 mm bore, Ø16 × 8 mm</td><td>4</td><td></td></tr><tr><td>Smooth steel axle, 5 ×70 mm finished length</td><td>6</td><td>Check the physical stack before cutting stock.</td></tr><tr><td>Smooth steel axle, 6 ×77 mm finished length</td><td>2</td><td></td></tr><tr><td>Smooth steel axle, 8 ×87 mm finished length</td><td>2</td><td></td></tr><tr><td>Rigid motor-to-shaft coupling, 6 mm bores</td><td>2</td><td></td></tr><tr><td>HEX12 metal wheel hub, 6 mm bore, 18 mm length</td><td>2</td><td></td></tr></table></div><p>LK05/LK06/LK08 are guide identifiers for purchased shaft collars, also called lock rings. <a href="PART_REFERENCES.md">All spacer and collar references</a>.</p><h2>Arm, gripper and body</h2><div class="table-wrap"><table><tr><td>Item</td><td>Quantity</td><td>Note</td></tr><tr><td>ST3215 12 V serial bus servo</td><td>5</td><td>Keep the original servo screw packs.</td></tr><tr><td>CF35-12 constant-force gripper servo</td><td>1</td><td></td></tr><tr><td>3010 fan, 12 V</td><td>2</td><td></td></tr><tr><td>Magnet, 20 ×10 ×2 mm</td><td>4</td><td>Glue into the pockets with epoxy; check polarity before gluing.</td></tr><tr><td>Small two-part epoxy adhesive kit, two tubes (resin + hardener)</td><td>1 kit</td><td>For gluing the four bin magnets and joining the two-piece hull and cover when printing on a smaller printer.</td></tr><tr><td>M3 brass heat-set insert, OD4 mm, length 6 mm</td><td>11</td><td>10 in the hull and 1 in the LiDAR base.</td></tr></table></div><h2>Power and wiring — module-based rover</h2><div class="table-wrap"><table><tr><td>Item</td><td>Quantity</td><td>Note</td></tr><tr><td>12-cell battery pack, 3S4P, with BMS</td><td>1</td><td>110 × 67 × 35 mm.</td></tr><tr><td>12.6 V CC/CV charger for the selected 3S pack</td><td>1</td><td></td></tr><tr><td>Emergency stop LA16-11ZS/A, 16 mm</td><td>1</td><td></td></tr><tr><td>KCD11 two-pin rocker switch and splash cover</td><td>1</td><td></td></tr><tr><td>Inline blade-fuse holder, 14 AWG</td><td>1</td><td></td></tr><tr><td>ATC blade fuse, 15 A</td><td>1</td><td></td></tr><tr><td>Amass XT30 male/female connector pair</td><td>6</td><td></td></tr><tr><td>DC panel socket, 5.5 ×2.1 mm</td><td>2</td><td>Female panel-mount sockets.</td></tr><tr><td>DC male barrel plug — computer power branch</td><td>1</td><td>Jetson: <strong>5.5 × 2.5 mm</strong>, 9.5 mm barrel, centre positive (<a href="https://developer.nvidia.com/downloads/assets/embedded/secure/jetson/orin_nano/docs/jetson_orin_nano_devkit_carrier_board_specification_sp.pdf">NVIDIA specification</a>). Pi option: choose the plug that matches the input of the selected 5 V power supply. These are alternatives.</td></tr><tr><td>DC male barrel plug, 5.5 × 2.1 mm — servo power branch</td><td>1</td><td>For the Waveshare Bus Servo Adapter A (<a href="https://docs.waveshare.com/Bus_Servo_Adapter_A">Waveshare specification</a>).</td></tr><tr><td>DC male barrel plug, 5.5 × 2.1 mm — battery extension</td><td>1</td><td>Matches the 5.5 × 2.1 mm panel socket listed above.</td></tr><tr><td>Wire, ferrules and heat-shrink</td><td>1 lot</td><td></td></tr><tr><td>Plugable USB hub, model USB2-2port</td><td>1</td><td></td></tr><tr><td>USB-C to USB-A cable, 30 cm</td><td>3</td><td></td></tr><tr><td>RealSense camera cable</td><td>1</td><td><a href="https://www.lazada.co.th/products/i16248699269-s127506585857.html">Lazada product link</a> · RealSense option only.</td></tr></table></div><h2>Choose one computer</h2><div class="table-wrap"><table><tr><td>Item</td><td>Quantity</td><td>Note</td></tr><tr><td>NVIDIA Jetson Orin Nano Super Developer Kit</td><td>1</td><td>Use the Jetson carrier.</td></tr><tr><td>OR Raspberry Pi5 with its cooler, storage and appropriate 5 V supply</td><td>1</td><td>Use the Pi carrier and the mounting screws and spacers supplied with the HAT.</td></tr></table></div><h2>Sensors</h2><div class="table-wrap"><table><tr><td>Item</td><td>Quantity</td><td>Note</td></tr><tr><td>Intel RealSense D455 OR Orbbec Gemini 2</td><td>1</td><td>Use the matching printed insert(s); these are alternatives.</td></tr><tr><td>SLAMTEC RPLIDAR C1</td><td>1</td><td></td></tr><tr><td>Wrist USB camera for the R30 mount</td><td>1</td><td>PCB mounting-hole pattern: 21 × 13.5 mm.</td></tr></table></div><h2>Fasteners by assembly</h2><p>Quantities are for one rover. Use the assembly step to locate each fastener.</p><div class="table-wrap"><table><tr><td>Assembly</td><td>Fasteners for one rover</td></tr><tr><td>Choose the hull and fit the inserts</td><td>11 × M3 heat-set insert, OD4 mm, length 6 mm; 6 × Split hull only: M4 × 15 socket-head screw; 6 × Split hull only: M4 hex nut, 7 mm across flats; 6 × Split hull only: M4 washer, Ø9 × 0.8 mm</td></tr><tr><td>Build the six road wheels</td><td>18 × M3 × 35 socket-head screw; 18 × M3 hex nut</td></tr><tr><td>Build the two drive wheels</td><td>6 × M3 × 20 socket-head screw; 6 × M3 hex nut</td></tr><tr><td>Build the two idler wheels</td><td>6 × M3 × 25 socket-head screw; 6 × M3 hex nut</td></tr><tr><td>Fit the motors and inner bearing retainers</td><td>8 × M4 × 20 socket-head screw; 8 × M4 hex nut; 12 × M3 × 8 socket-head screw</td></tr><tr><td>Fit the inner track frames</td><td>6 × M4 × 15 socket-head screw; 6 × M4 hex nut</td></tr><tr><td>Fit the drive axles and outer bearing covers</td><td>6 × M3 × 15 socket-head screw; 6 × M3 hex nut</td></tr><tr><td>Fit the idler slides and tensioners</td><td>16 × M3 × 15 socket-head screw; 16 × M3 hex nut; 4 × M4 × 35 socket-head screw; 8 × M4 hex nut; 4 × M4 washer</td></tr><tr><td>Close the track frames</td><td>4 × M4 × 60 socket-head screw; 4 × M4 hex nut; 4 × M4 washer</td></tr><tr><td>Fit the driver and controller</td><td>4 × M3 × 6 socket-head screw; 6 × M2 × 6 screw, non-countersunk; 6 × M2 washer, 0.3 mm thick</td></tr><tr><td>Fit the speaker and amplifier</td><td>2 × M3 × 6 socket-head screw; 2 × M2 × 6 screw, non-countersunk; 2 × M2 washer, 0.5 mm thick</td></tr><tr><td>Fit the computer carrier and servo adapter</td><td>2 × M3 × 6 socket-head screw; 2 × M3 × 8 socket-head screw; 4 × M3 washer, 0.5 mm thick; 4 × M2.5 × 8 screw, non-countersunk; 4 × M2.5 washer, 0.5 mm thick; 2 × Jetson only: M3 × 8 socket-head screw, no washer</td></tr><tr><td>Fit the camera option</td><td>2 × RealSense only: M4 × 10 socket-head screw; 2 × Gemini only: M3 × 8 socket-head screw</td></tr><tr><td>Fit the LiDAR carriage</td><td>2 × M3 × 10 socket-head screw; 4 × M2.5 × 6 socket-head screw; 1 × M3 × 20 socket-head screw</td></tr><tr><td>Fit power distribution and cooling</td><td>4 × M2.5 × 10 low-head screw, head diameter 5 mm maximum</td></tr><tr><td>Fit the arm plate and build the arm</td><td>4 × M3 × 10 socket-head screw; 4 × M4 × 25 countersunk 90-degree screw; 4 × M4 hex nut; 20 × Kit screw: M2 × 6, original servo head; 37 × Kit screw: M3 × 6, original servo head</td></tr><tr><td>Build the gripper and wrist camera</td><td>11 × Kit screw: M3 × 6 cross-head ISO7045; 6 × Kit screw: #1-42 x3/16 inch typeAB; 4 × M2 × 6 screw, non-countersunk, for wrist camera PCB; 2 × M3 × 10 socket-head screw, for wrist camera bracket; 2 × M3 hex nut, for wrist camera bracket</td></tr><tr><td>Close the hull and fit the bin</td><td>10 × M3 × 10 countersunk 90-degree screw, head diameter 6.4 mm maximum; 4 × M3 × 10 countersunk 90-degree screw, head diameter 5.6 mm maximum</td></tr></table></div><p>Screw lengths are measured under the head, except countersunk screws, which use their full length. Retain the original heads supplied with the servo and gripper kits. Camera screw sets are alternatives.</p><p><a href="FASTENER_MEASUREMENTS.md">Measured fastener lengths</a>. Pi/HAT mounting hardware is supplied with the HAT; no separate screw purchase is added.</p><p>The supplied computer carriers are for the NVIDIA Jetson Orin Nano and Raspberry Pi 5. Choose one carrier and one camera option.</p><p>See the <a href="ASSEMBLY.md">assembly cards</a>.</p><h2>Adhesive for the split hull and cover</h2><p>Use the same two-part epoxy kit listed above. Retain the six M4 hull fixings and the four cover mounting screws.</p></div></details><a class="pillbtn secondary" href="../../BOM.md">Download BOM</a></section><section id="files"><h2>Current files</h2><p>The main Fusion and STEP files cover the one-piece set. The two-piece hull and upper cover have their own native Fusion assemblies. Arm meshes and track masters are also supplied as STL.</p><div class="downloads"><a class="pillbtn" href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_R92_Mechanical_20261016.zip">Download CAD &amp; STL package</a><a class="pillbtn secondary" href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_Upper_Cover_R10_Split_Assembly.f3d">Two-piece cover: Fusion source</a><a class="pillbtn secondary" href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_Hull_R92_Split_Assembly.f3d">Two-piece hull: Fusion source</a><a class="pillbtn" href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_Printable_Source_R92.f3d">One-piece set: Fusion source</a><a class="pillbtn secondary" href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_Printable_BRep_Parts_R92.step">STEP solids</a><a class="pillbtn secondary" href="https://github.com/metrox-eth/moss/releases/download/v0.6-r92/printed_parts.csv">Parts CSV</a></div><p class="small muted">113 part STL files cover the alternatives, plus two optional fit coupons. The selected catalogue uses 106–109 pieces. Original project and upstream licence notices are included.</p></section></main><footer class="wrap">MOSS / R92 · 16 October 2026</footer><script>const hull=document.getElementById('hull'),cover=document.getElementById('cover'),compute=document.getElementById('compute'),camera=document.getElementById('camera'),search=document.getElementById('search');function updateParts(){const scopes=['COMMON','HULL_'+hull.value,'COVER_'+cover.value,'COMPUTE_'+compute.value,'CAMERA_'+camera.value];const q=search.value.toLowerCase().trim();for(const row of document.querySelectorAll('.option-row'))row.classList.toggle('hidden',!scopes.includes(row.dataset.scope));let shown=0;for(const part of document.querySelectorAll('.part')){const show=scopes.includes(part.dataset.scope)&&part.dataset.search.includes(q);part.classList.toggle('hidden',!show);if(show)shown++}for(const g of document.querySelectorAll('.group'))g.classList.toggle('hidden',!g.querySelector('.part:not(.hidden)'));document.getElementById('partCount').textContent=shown+' pieces'+(q?' found':'')}[hull,cover,compute,camera,search].forEach(x=>x.addEventListener(x===search?'input':'change',updateParts));document.getElementById('stepFilter').addEventListener('change',e=>{for(const x of document.querySelectorAll('.step'))x.classList.toggle('hidden',e.target.value==='clips'&&x.dataset.clip!=='true')});document.addEventListener('play',e=>{if(e.target.tagName==='VIDEO')document.querySelectorAll('video').forEach(v=>{if(v!==e.target)v.pause()})},true);updateParts();</script></body></html>
\ No newline at end of file
diff --git a/docs/build/print_groups.json b/docs/build/print_groups.json
new file mode 100644
index 0000000..36bf65c
--- /dev/null
+++ b/docs/build/print_groups.json
@@ -0,0 +1,241 @@
+[
+ {
+ "id": "01",
+ "title": "Hull options",
+ "part_ids": [
+ "Hull_R92",
+ "Hull_R92_Split_Rear_Motor_Computer",
+ "Hull_R92_Split_Front_Battery_Camera"
+ ]
+ },
+ {
+ "id": "02",
+ "title": "Outer track frames",
+ "part_ids": [
+ "Left_Outer_Track_Frame_R32",
+ "Right_Outer_Track_Frame_R32",
+ "Left_inner_tensioner_cover_R12_C2",
+ "Right_inner_tensioner_cover_R12_C2"
+ ]
+ },
+ {
+ "id": "03",
+ "title": "Inner frames & spacers",
+ "part_ids": [
+ "Left_inner_track_frame_R12_C2",
+ "Right_inner_track_frame_R12_C2",
+ "Left_Spacer_cross_member_-40",
+ "Left_Spacer_cross_member_40",
+ "Right_Spacer_cross_member_-40",
+ "Right_Spacer_cross_member_40",
+ "Left_Spacer_road_wheel_-70_inner_ID01_R24",
+ "Left_Spacer_road_wheel_0_inner_ID01_R24",
+ "Left_Spacer_road_wheel_70_inner_ID01_R24",
+ "Right_Spacer_road_wheel_-70_inner_ID01_R24",
+ "Right_Spacer_road_wheel_0_inner_ID01_R24",
+ "Right_Spacer_road_wheel_70_inner_ID01_R24",
+ "Left_Spacer_tensioner_inner_ID05_R24",
+ "Right_Spacer_tensioner_inner_ID05_R24",
+ "Left_Spacer_drive_inner_ID03_R24",
+ "Right_Spacer_drive_inner_ID03_R24"
+ ]
+ },
+ {
+ "id": "04",
+ "title": "Motor bay & LiDAR mounts",
+ "part_ids": [
+ "02_Motor_access_hatch_10_screws",
+ "Motor_Mount_Left_R90",
+ "Motor_Mount_Right_R90",
+ "05_Left_bearing_retainer",
+ "06_Right_bearing_retainer",
+ "Lidar_Base_R84",
+ "Lidar_dovetail_carriage_R21"
+ ]
+ },
+ {
+ "id": "05",
+ "title": "Outer spacers & covers",
+ "part_ids": [
+ "Left_Spacer_road_wheel_-70_outer_ID02_R24",
+ "Left_Spacer_road_wheel_0_outer_ID02_R24",
+ "Left_Spacer_road_wheel_70_outer_ID02_R24",
+ "Right_Spacer_road_wheel_-70_outer_ID02_R24",
+ "Right_Spacer_road_wheel_0_outer_ID02_R24",
+ "Right_Spacer_road_wheel_70_outer_ID02_R24",
+ "Left_Spacer_tensioner_outer_ID06_R24",
+ "Right_Spacer_tensioner_outer_ID06_R24",
+ "Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24",
+ "Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24",
+ "Left_Cover_tensioner_outer",
+ "Right_Cover_tensioner_outer"
+ ]
+ },
+ {
+ "id": "06",
+ "title": "Drive & idler wheels",
+ "part_ids": [
+ "Left_22T_idler_wheel_inner_half_R13",
+ "Left_22T_idler_wheel_outer_half_R13",
+ "Right_22T_idler_wheel_inner_half_R13",
+ "Right_22T_idler_wheel_outer_half_R13",
+ "Left_HEX12_drive_wheel_inner_half_R13",
+ "Left_HEX12_drive_wheel_outer_half_R13",
+ "Right_HEX12_drive_wheel_inner_half_R13",
+ "Right_HEX12_drive_wheel_outer_half_R13"
+ ]
+ },
+ {
+ "id": "07",
+ "title": "Road wheels",
+ "part_ids": [
+ "Left_625_road_wheel_-70_inner_half_R13",
+ "Left_625_road_wheel_-70_outer_half_R13",
+ "Left_625_road_wheel_70_inner_half_R13",
+ "Left_625_road_wheel_70_outer_half_R13",
+ "Right_625_road_wheel_-70_inner_half_R13",
+ "Right_625_road_wheel_-70_outer_half_R13",
+ "Right_625_road_wheel_70_inner_half_R13",
+ "Right_625_road_wheel_70_outer_half_R13",
+ "Left_625_road_wheel_0_inner_half_R13",
+ "Left_625_road_wheel_0_outer_half_R13",
+ "Right_625_road_wheel_0_inner_half_R13",
+ "Right_625_road_wheel_0_outer_half_R13"
+ ]
+ },
+ {
+ "id": "08",
+ "title": "Power distribution housing",
+ "part_ids": [
+ "XT30_distribution_base",
+ "XT30_distribution_lid",
+ "XT30_insulating_separator"
+ ]
+ },
+ {
+ "id": "09",
+ "title": "Slides, retainers & spacers",
+ "part_ids": [
+ "Left_Slider_outer",
+ "Left_Cover_motor_bearing",
+ "Right_Slider_outer",
+ "Right_Cover_motor_bearing",
+ "Left_inner_tensioner_slider",
+ "Right_inner_tensioner_slider",
+ "Left_Spacer_tensioner_retainer_inner_ID07_R24",
+ "Left_Spacer_tensioner_retainer_outer_ID08_R24",
+ "Left_Spacer_tensioner_center",
+ "Right_Spacer_tensioner_retainer_inner_ID07_R24",
+ "Right_Spacer_tensioner_retainer_outer_ID08_R24",
+ "Right_Spacer_tensioner_center",
+ "Left_Spacer_road_wheel_-70_center",
+ "Left_Spacer_road_wheel_0_center",
+ "Left_Spacer_road_wheel_70_center",
+ "Right_Spacer_road_wheel_-70_center",
+ "Right_Spacer_road_wheel_0_center",
+ "Right_Spacer_road_wheel_70_center",
+ "Left_Drive_bearing_to_collar_spacer_R12_C1",
+ "Right_Drive_bearing_to_collar_spacer_R12_C1"
+ ]
+ },
+ {
+ "id": "10",
+ "title": "Upper cover",
+ "part_ids": [
+ "Upper_cover_R9",
+ "Upper_Cover_R10_Rear",
+ "Upper_Cover_R10_Lidar_Extension"
+ ]
+ },
+ {
+ "id": "11",
+ "title": "Bin",
+ "part_ids": [
+ "14_Bin_20x10x2_magnet_pockets"
+ ]
+ },
+ {
+ "id": "12",
+ "title": "Arm plate",
+ "part_ids": [
+ "Arm_Mounting_Platform_R22"
+ ]
+ },
+ {
+ "id": "13",
+ "title": "Arm base & shoulder",
+ "part_ids": [
+ "SO101_Base",
+ "SO101_Shoulder_rotation",
+ "SO101_Base_motor_holder",
+ "SO101_Shoulder_bracket_cable_clip"
+ ]
+ },
+ {
+ "id": "14",
+ "title": "Arm links",
+ "part_ids": [
+ "SO101_Upper_arm_cable_clip",
+ "SO101_Forearm_cable_clip",
+ "SO101_Wrist_cable_clip",
+ "SO101_Wrist_bracket"
+ ]
+ },
+ {
+ "id": "15",
+ "title": "Gripper & wrist camera",
+ "part_ids": [
+ "NC90_Right_side_shield",
+ "NC90_Pinion",
+ "NC90_Cable_guide",
+ "NC90_Right_jaw_extended_rack",
+ "Gripper_Camera_Mount_R30",
+ "NC90_Left_side_shield",
+ "NC90_Base_extended_rails",
+ "NC90_Left_jaw_extended_rack"
+ ]
+ },
+ {
+ "id": "16",
+ "title": "Left track",
+ "part_ids": [
+ "Left_Track_R78_70_Teeth"
+ ]
+ },
+ {
+ "id": "17",
+ "title": "Right track",
+ "part_ids": [
+ "Right_Track_R78_70_Teeth"
+ ]
+ },
+ {
+ "id": "19",
+ "title": "Jetson carrier",
+ "part_ids": [
+ "Jetson_Adapter_R87"
+ ]
+ },
+ {
+ "id": "20",
+ "title": "Pi carrier",
+ "part_ids": [
+ "Pi_Adapter_R87"
+ ]
+ },
+ {
+ "id": "21",
+ "title": "Gemini inserts",
+ "part_ids": [
+ "Gemini_Window_Adapter_R89",
+ "Gemini_Flush_Insert_R72"
+ ]
+ },
+ {
+ "id": "22",
+ "title": "RealSense insert",
+ "part_ids": [
+ "RealSense_Insert_R72"
+ ]
+ }
+]
diff --git a/docs/build/video_chapters.json b/docs/build/video_chapters.json
new file mode 100644
index 0000000..28f319b
--- /dev/null
+++ b/docs/build/video_chapters.json
@@ -0,0 +1,112 @@
+[
+ {
+ "id": "01-match-spacer-dots",
+ "title": "Identify spacers and shaft collars",
+ "file": "videos/01-match-spacer-dots.mp4",
+ "poster": "images/01-match-spacer-dots.jpg",
+ "source": "Local CAD meshes; rendered anew with the Road wheel palette",
+ "scope": "Part identification with dimensions and matching guide references",
+ "audio": false,
+ "sha256": "07ca420aa88537a55a616a3dd8820e63cfeefc9bb1643c73443f8b642842cf56",
+ "decode_ok": true,
+ "style": "Road wheel: light background, dark printed bodies, green spacers, gold nuts/collars, grey metal",
+ "duration_seconds": 20
+ },
+ {
+ "id": "02-road-wheel-spacers",
+ "title": "Road-wheel spacer order",
+ "file": "videos/02-road-wheel-spacers.mp4",
+ "poster": "images/02-road-wheel-spacers.jpg",
+ "source": "Local CAD meshes; rendered anew with the Road wheel palette",
+ "scope": "Exploded assembly and spacer placement; later fastening actions remain separate",
+ "audio": false,
+ "sha256": "68cdab50694a03e03f5e8edbb500c7ee750748a0219ab724bcc7db7847802715",
+ "decode_ok": true,
+ "style": "Road wheel: light background, dark printed bodies, green spacers, gold nuts/collars, grey metal",
+ "duration_seconds": 19
+ },
+ {
+ "id": "03-drive-wheel-spacers",
+ "title": "Drive-wheel spacer order",
+ "file": "videos/03-drive-wheel-spacers.mp4",
+ "poster": "images/03-drive-wheel-spacers.jpg",
+ "source": "Local CAD meshes; rendered anew with the Road wheel palette",
+ "scope": "Exploded assembly and spacer placement; later fastening actions remain separate",
+ "audio": false,
+ "sha256": "c4bb671ff6d68883098052faffadc9a91de316c9d96e3e8d00b5267069a9dd0d",
+ "decode_ok": true,
+ "style": "Road wheel: light background, dark printed bodies, green spacers, gold nuts/collars, grey metal",
+ "duration_seconds": 19
+ },
+ {
+ "id": "04-idler-tensioner-spacers",
+ "title": "Idler and tensioner spacer order",
+ "file": "videos/04-idler-tensioner-spacers.mp4",
+ "poster": "images/04-idler-tensioner-spacers.jpg",
+ "source": "Local CAD meshes; rendered anew with the Road wheel palette",
+ "scope": "Exploded assembly and spacer placement; later fastening actions remain separate",
+ "audio": false,
+ "sha256": "661cda727e2545b13ae8009536d858c534d5982a28dd5db32f52e078dd33ca35",
+ "decode_ok": true,
+ "style": "Road wheel: light background, dark printed bodies, green spacers, gold nuts/collars, grey metal",
+ "duration_seconds": 19
+ },
+ {
+ "id": "05-track-side-reassembly",
+ "title": "Track-side reassembly overview",
+ "file": "videos/05-track-side-reassembly.mp4",
+ "poster": "images/05-track-side-reassembly.jpg",
+ "source": "Local CAD meshes; rendered anew with the Road wheel palette",
+ "scope": "Exploded assembly and spacer placement; later fastening actions remain separate",
+ "audio": false,
+ "sha256": "d41f231eb2a890d20146b10856edad30ac0708480f960497cad62c64cd19c35c",
+ "decode_ok": true,
+ "style": "Road wheel: light background, dark printed bodies, green spacers, gold nuts/collars, grey metal",
+ "duration_seconds": 19
+ },
+ {
+ "id": "06-road-wheel-screws",
+ "title": "Road wheel: bearings, nuts and screws",
+ "file": "videos/06-road-wheel-screws.mp4",
+ "poster": "images/06-road-wheel-screws.jpg",
+ "source": "Local CAD meshes; rendered anew with the Road wheel palette",
+ "scope": "Bearings enter from the mating faces; nuts seat next, then the halves close around SP09, and screws enter from the outside.",
+ "audio": false,
+ "sha256": "f102febba7fd008e6f213c0f2496ad489b9650a01fe95080f57e00c2f68bfc99",
+ "decode_ok": true,
+ "style": "Road wheel: light background, dark printed bodies, green spacers, gold nuts/collars, grey metal",
+ "duration_seconds": 21
+ },
+ {
+ "id": "07-xt30-power-distribution",
+ "title": "XT30 power distribution: exploded assembly",
+ "file": "videos/07-xt30-power-distribution.mp4",
+ "poster": "images/07-xt30-power-distribution.jpg",
+ "source": "Existing MOSS_XT30_eclate_assemblage.mp4 animation, 4 October 2026; same source geometry and motion, rendered with the guide palette",
+ "scope": "Open and close the XT30 enclosure; remove and refit the insulating divider and rigid soldered connector assembly. No hull-mounting sequence or full rover wiring diagram.",
+ "audio": false,
+ "sha256": "56df6475f3ac853c251396b845d91244ad0bc6da4195683b6517678101e6067d",
+ "decode_ok": true,
+ "style": "Road wheel: light background, dark printed bodies, green divider, gold connectors, grey metal",
+ "duration_seconds": 14,
+ "fps": 30,
+ "printed_part_comparisons": [
+ {
+ "part_id": "XT30_distribution_base",
+ "relative_volume_difference": 6.379379119872626e-05,
+ "dimensions_match_mm": 0.001
+ },
+ {
+ "part_id": "XT30_distribution_lid",
+ "relative_volume_difference": 0.00011425254700672035,
+ "dimensions_match_mm": 0.001
+ },
+ {
+ "part_id": "XT30_insulating_separator",
+ "relative_volume_difference": 1.2581040936747555e-05,
+ "dimensions_match_mm": 0.001
+ }
+ ],
+ "original_animation_motion_unchanged": true
+ }
+]
diff --git a/docs/build/videos/01-match-spacer-dots.mp4 b/docs/build/videos/01-match-spacer-dots.mp4
new file mode 100644
index 0000000..0a4d13a
Binary files /dev/null and b/docs/build/videos/01-match-spacer-dots.mp4 differ
diff --git a/docs/build/videos/02-road-wheel-spacers.mp4 b/docs/build/videos/02-road-wheel-spacers.mp4
new file mode 100644
index 0000000..1c5f29c
Binary files /dev/null and b/docs/build/videos/02-road-wheel-spacers.mp4 differ
diff --git a/docs/build/videos/03-drive-wheel-spacers.mp4 b/docs/build/videos/03-drive-wheel-spacers.mp4
new file mode 100644
index 0000000..33b74f8
Binary files /dev/null and b/docs/build/videos/03-drive-wheel-spacers.mp4 differ
diff --git a/docs/build/videos/04-idler-tensioner-spacers.mp4 b/docs/build/videos/04-idler-tensioner-spacers.mp4
new file mode 100644
index 0000000..10ea886
Binary files /dev/null and b/docs/build/videos/04-idler-tensioner-spacers.mp4 differ
diff --git a/docs/build/videos/05-track-side-reassembly.mp4 b/docs/build/videos/05-track-side-reassembly.mp4
new file mode 100644
index 0000000..7ce8c32
Binary files /dev/null and b/docs/build/videos/05-track-side-reassembly.mp4 differ
diff --git a/docs/build/videos/06-road-wheel-screws.mp4 b/docs/build/videos/06-road-wheel-screws.mp4
new file mode 100644
index 0000000..3f5bb03
Binary files /dev/null and b/docs/build/videos/06-road-wheel-screws.mp4 differ
diff --git a/docs/build/videos/07-xt30-power-distribution.mp4 b/docs/build/videos/07-xt30-power-distribution.mp4
new file mode 100644
index 0000000..2d65d2e
Binary files /dev/null and b/docs/build/videos/07-xt30-power-distribution.mp4 differ
diff --git a/hardware/README.md b/hardware/README.md
index add7995..e30773d 100644
--- a/hardware/README.md
+++ b/hardware/README.md
@@ -1,10 +1,10 @@
# Hardware
-Designed in Fusion 360. The STL (one file per part) and STEP files land here at the design freeze, with the fastener list and the sources they derive from (SO-101 arm, NormaCore parallel-jaw gripper, widened to 90 mm) with exact revisions and local changes. The freeze happens after one test on the real robot: a full battery emptied over 3 km on the beach, tracks still on, no bolt lost.
+The current mechanical package is [V0.6 / R92](https://github.com/metrox-eth/moss/releases/tag/v0.6-r92). [Download CAD & STL](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_R92_Mechanical_20261016.zip) · [Build guide](https://www.showrobotics.ai/moss/build/). It contains individual STL files, editable Fusion source, STEP solid geometry, per-part revisions and attribution. Third-party electronics reference models remain in the internal integration assembly.
-Until then: the [parts list](../3DPrinting.md), the [BOM](../BOM.md) and the photos in `media/` are the reference.
+See the [print catalogue](../3DPrinting.md), [BOM](../BOM.md) and [assembly guide](../Assembly.md). Choose the one-piece hull or the current R92 two-piece alternative. The two-piece native Fusion sources are supplied separately from the main one-piece CAD set.
-`bench/` holds the raw traces of the bench tests, one folder per date. The 20 September INA219 trace is not a motor-current measurement.
+`bench/` retains the raw bench traces. The 20 September INA219 trace is not a motor-current measurement.
## Electronics prototypes
diff --git a/hardware/mechanical/r92/README.md b/hardware/mechanical/r92/README.md
new file mode 100644
index 0000000..56c88c3
--- /dev/null
+++ b/hardware/mechanical/r92/README.md
@@ -0,0 +1,17 @@
+# MOSS V0.6 / R92 mechanical package
+
+**[Download the complete CAD & STL package](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_R92_Mechanical_20261016.zip)** · [Build guide](https://www.showrobotics.ai/moss/build/) · [BOM](../../../BOM.md) · [Release and individual files](https://github.com/metrox-eth/moss/releases/tag/v0.6-r92)
+
+The package includes 113 part STL files plus two optional hull-joint fit coupons, editable Fusion source, STEP solid geometry, part previews and seven silent assembly clips. Choose the one-piece or two-piece hull and cover, one computer carrier, and one camera option. The selected print set uses 106–109 catalogue pieces.
+
+- [One-piece printable Fusion source](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_Printable_Source_R92.f3d)
+- [STEP solids](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_Printable_BRep_Parts_R92.step)
+- [Two-piece hull Fusion assembly](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_Hull_R92_Split_Assembly.f3d)
+- [Two-piece upper-cover Fusion assembly](https://github.com/metrox-eth/moss/releases/download/v0.6-r92/MOSS_Upper_Cover_R10_Split_Assembly.f3d)
+- [Parts CSV](data/printed_parts.csv)
+
+The guide's catalogue links directly to each STL. The ZIP also contains attribution, licence notices, geometry checks and per-file checksums. Manufacturer electronics/camera reference models and the complete internal integration assembly are excluded.
+
+The Jetson retaining-tab STL files are not included; see [fastener measurements](../../../docs/build/FASTENER_MEASUREMENTS.md#jetson-retaining-tabs).
+
+[Printing instructions](../../../3DPrinting.md) · [Written assembly cards](../../../docs/build/ASSEMBLY.md)
diff --git a/hardware/mechanical/r92/data/printed_parts.csv b/hardware/mechanical/r92/data/printed_parts.csv
new file mode 100644
index 0000000..bfeb29c
--- /dev/null
+++ b/hardware/mechanical/r92/data/printed_parts.csv
@@ -0,0 +1,114 @@
+part_id,file,revision,material,quantity,scope,group_id,orientation,infill_percent,infill_pattern,profile,sha256,display_name,cad_source,assembly_ref
+Hull_R92,STL/Common/Hull_R92.stl,R92,PETG,1,HULL_ONE_PIECE,01,Flat exterior base down,15,gyroid,standard/default,b3cf069dee52f00744f2cd6a41ecebe5dbc6a40da43c806cc8442ee77f53fc83,One-piece hull,,
+Hull_R92_Split_Rear_Motor_Computer,STL/Options/Hull_R92_Split_Rear_Motor_Computer.stl,R92 split,PETG,1,HULL_SPLIT,01,Flat exterior base down,15,gyroid,standard/default,02e1bc7b4f4755b0ca82ddd2a5242765e538a1483545c7483617ea75f468d951,Rear hull — motors and computer,CAD/Split_Hull_R92/Hull_R92_Split_Rear_Motor_Computer.f3d,
+Hull_R92_Split_Front_Battery_Camera,STL/Options/Hull_R92_Split_Front_Battery_Camera.stl,R92 split,PETG,1,HULL_SPLIT,01,Flat exterior base down,15,gyroid,standard/default,5f55175d4943ebde82d409dabb7b6ac6047e21f00a6836642135a2625c3fcb8d,Front hull — battery and camera,CAD/Split_Hull_R92/Hull_R92_Split_Front_Battery_Camera.f3d,
+Left_Outer_Track_Frame_R32,STL/Common/Left_Outer_Track_Frame_R32.stl,R32,PETG,1,COMMON,02,"Flat, 45 degrees: front-right to rear-left diagonal; centre on the plate. Supplied STL is already rotated. Print each outer frame separately.",15,gyroid,standard/default,ffd50dc1ac47ea15197934334c73fbf68cbf1d92c60fd80ece3b50206c860809,,,
+Right_Outer_Track_Frame_R32,STL/Common/Right_Outer_Track_Frame_R32.stl,R32,PETG,1,COMMON,02,"Flat, 45 degrees: front-right to rear-left diagonal; centre on the plate. Supplied STL is already rotated. Print each outer frame separately.",15,gyroid,standard/default,0e6fe61167affa11301db8e77cf85b52a4668c521559f72761f5ee365adcfece,,,
+Left_inner_tensioner_cover_R12_C2,STL/Common/Left_inner_tensioner_cover_R12_C2.stl,R12-C2,PETG,1,COMMON,02,Existing print contact face retained,15,gyroid,standard/default,a952c3ad0663b9c3c29b5aec4b6322c34917dfa3835eb8485884bc34a7fd6769,,,
+Right_inner_tensioner_cover_R12_C2,STL/Common/Right_inner_tensioner_cover_R12_C2.stl,R12-C2,PETG,1,COMMON,02,Existing print contact face retained,15,gyroid,standard/default,d7413f0c1ccd1538aa9915b3fb4f87e10ba00368a04b0eb47e7779ff392595d2,,,
+Left_inner_track_frame_R12_C2,STL/Common/Left_inner_track_frame_R12_C2.stl,R12-C2,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,d78dfdd09c3dba1cb235a39028a1b3fa8a21275268d271384e5b88d341ffdeb0,,,
+Right_inner_track_frame_R12_C2,STL/Common/Right_inner_track_frame_R12_C2.stl,R12-C2,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,237aceddfc73351ad26fb6031196a8fa4afda64c631ae95b37c4f62336232d2c,,,
+Left_Spacer_cross_member_-40,STL/Common/Left_Spacer_cross_member_-40.stl,R12,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,db2a0fc7aebdfeec667c06aa9db338e11944392b0bb9312551a3d45597bb227a,,,SP12
+Left_Spacer_cross_member_40,STL/Common/Left_Spacer_cross_member_40.stl,R12,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,db2a0fc7aebdfeec667c06aa9db338e11944392b0bb9312551a3d45597bb227a,,,SP12
+Right_Spacer_cross_member_-40,STL/Common/Right_Spacer_cross_member_-40.stl,R12,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,06e68580425f6691ddf663ade31df700bf84bad7fba49cf648cb816f317cc49c,,,SP12
+Right_Spacer_cross_member_40,STL/Common/Right_Spacer_cross_member_40.stl,R12,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,06e68580425f6691ddf663ade31df700bf84bad7fba49cf648cb816f317cc49c,,,SP12
+Left_Spacer_road_wheel_-70_inner_ID01_R24,STL/Common/Left_Spacer_road_wheel_-70_inner_ID01_R24.stl,R24,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,6524a07fd66cedb81cf84308b0f46450325c479c0272bc87a90087f9ddc2b17e,,,SP01
+Left_Spacer_road_wheel_0_inner_ID01_R24,STL/Common/Left_Spacer_road_wheel_0_inner_ID01_R24.stl,R24,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,8bf139e687b345b5a9948d4f7eaa0636aa1f58d454e4528a263ccac508487f27,,,SP01
+Left_Spacer_road_wheel_70_inner_ID01_R24,STL/Common/Left_Spacer_road_wheel_70_inner_ID01_R24.stl,R24,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,a150e363c0c118268bcf706b412892c5aa652c1c5d6d476ffaab9d31aee62e03,,,SP01
+Right_Spacer_road_wheel_-70_inner_ID01_R24,STL/Common/Right_Spacer_road_wheel_-70_inner_ID01_R24.stl,R24,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,1bef1f62c834dbfbfba2eb768cd209d17ffdc24903dbc9c34b05a8ebb730a714,,,SP01
+Right_Spacer_road_wheel_0_inner_ID01_R24,STL/Common/Right_Spacer_road_wheel_0_inner_ID01_R24.stl,R24,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,61ae4a23632e7c0bee4c907359a0c7884c5fdfa47780f86573d6735502eea5e0,,,SP01
+Right_Spacer_road_wheel_70_inner_ID01_R24,STL/Common/Right_Spacer_road_wheel_70_inner_ID01_R24.stl,R24,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,fc4e3e915b9da701c10504ddaf36249341d408334c1ac05f9a7c62de3d697c45,,,SP01
+Left_Spacer_tensioner_inner_ID05_R24,STL/Common/Left_Spacer_tensioner_inner_ID05_R24.stl,R24,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,1e966c06eb246e34d791411ec8ee111685d45df8c7c9554736f4bb0891309bd2,,,SP05
+Right_Spacer_tensioner_inner_ID05_R24,STL/Common/Right_Spacer_tensioner_inner_ID05_R24.stl,R24,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,e173d43b9ac337fad39d41f59533cf84a8beb1f64ebba9cab7b1d1a7f29f309a,,,SP05
+Left_Spacer_drive_inner_ID03_R24,STL/Common/Left_Spacer_drive_inner_ID03_R24.stl,R24,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,d80d8e7bd2ca3ac8e30ace2e8a3d5e320d52f6f77801e507bb830ea8da1c40d7,,,SP03
+Right_Spacer_drive_inner_ID03_R24,STL/Common/Right_Spacer_drive_inner_ID03_R24.stl,R24,PETG,1,COMMON,03,Existing print contact face retained,15,gyroid,standard/default,0c4397ae14dc6a04e923b4eb3987af829bd69c734fee52bfc160ef7bcbeadfca,,,SP03
+02_Motor_access_hatch_10_screws,STL/Common/02_Motor_access_hatch_10_screws.stl,Retained geometry,PETG,1,COMMON,04,Existing print contact face retained,15,gyroid,standard/default,0ff371e953ece886833933eb11cfbb20c85fa29b277a6b483e8b59f4824cdd71,,,
+Motor_Mount_Left_R90,STL/Common/Motor_Mount_Left_R90.stl,R90,PETG,1,COMMON,04,Broad motor-facing flat face down,15,gyroid,standard/default,f570d1c1405bcb94ed911f226da8689d9e83fe02e97146cd5450150a0781a5f6,,,
+Motor_Mount_Right_R90,STL/Common/Motor_Mount_Right_R90.stl,R90,PETG,1,COMMON,04,Broad motor-facing flat face down,15,gyroid,standard/default,14966ecb934967dde73011f3d70092fb5f84ca31a4049be04df2a969c7704c30,,,
+05_Left_bearing_retainer,STL/Common/05_Left_bearing_retainer.stl,Retained geometry,PETG,1,COMMON,04,Existing print contact face retained,15,gyroid,standard/default,03bfdb4cbc0deb83c3a42974dd037ed9d5c79e66cb981570f51c1acb8696151f,,,
+06_Right_bearing_retainer,STL/Common/06_Right_bearing_retainer.stl,Retained geometry,PETG,1,COMMON,04,Existing print contact face retained,15,gyroid,standard/default,480fc16d3b4394bad091f4f5aa8f008b59668e8395a73ed7c2a6fe4917fe37c6,,,
+Lidar_Base_R84,STL/Common/Lidar_Base_R84.stl,R84,PETG,1,COMMON,04,Flat base down,15,gyroid,standard/default,cee5b2b9fda12df0160d8286a14e3c537af34daf2a312c69061bfbe1e417d89f,,,
+Lidar_dovetail_carriage_R21,STL/Common/Lidar_dovetail_carriage_R21.stl,R21,PETG,1,COMMON,04,Existing print contact face retained,15,gyroid,standard/default,60c0045671823ab37e25e0e24d1d42149bb8dcefc07faf975a0ade4533dc31fb,,,
+Left_Spacer_road_wheel_-70_outer_ID02_R24,STL/Common/Left_Spacer_road_wheel_-70_outer_ID02_R24.stl,R24,PETG,1,COMMON,05,Existing print contact face retained,15,gyroid,standard/default,c5c7fcd0d8116541a818eeb6e55941981b87d2a916a44f9b976cf8330c3cf227,,,SP02
+Left_Spacer_road_wheel_0_outer_ID02_R24,STL/Common/Left_Spacer_road_wheel_0_outer_ID02_R24.stl,R24,PETG,1,COMMON,05,Existing print contact face retained,15,gyroid,standard/default,875a7fb90370f82182ce354eed878bba970934680529d34b0a8a102de59145ce,,,SP02
+Left_Spacer_road_wheel_70_outer_ID02_R24,STL/Common/Left_Spacer_road_wheel_70_outer_ID02_R24.stl,R24,PETG,1,COMMON,05,Existing print contact face retained,15,gyroid,standard/default,4cfb999727c117600a425c84bde5ff8733e9a14bb528c9740a29cc4868e10196,,,SP02
+Right_Spacer_road_wheel_-70_outer_ID02_R24,STL/Common/Right_Spacer_road_wheel_-70_outer_ID02_R24.stl,R24,PETG,1,COMMON,05,Existing print contact face retained,15,gyroid,standard/default,de31cbd031c782c3107d50c7febb4dab425f9c0034ad1e0f48811295dcfc06eb,,,SP02
+Right_Spacer_road_wheel_0_outer_ID02_R24,STL/Common/Right_Spacer_road_wheel_0_outer_ID02_R24.stl,R24,PETG,1,COMMON,05,Existing print contact face retained,15,gyroid,standard/default,1e7b6f15070d21643fd6f477fe4f2e814fb328e11d0044816886fd61909e5cbf,,,SP02
+Right_Spacer_road_wheel_70_outer_ID02_R24,STL/Common/Right_Spacer_road_wheel_70_outer_ID02_R24.stl,R24,PETG,1,COMMON,05,Existing print contact face retained,15,gyroid,standard/default,9eecdcae413c2b41478da7d159cd409e6dfae95bd9d9ad02cf57f013570ee928,,,SP02
+Left_Spacer_tensioner_outer_ID06_R24,STL/Common/Left_Spacer_tensioner_outer_ID06_R24.stl,R24,PETG,1,COMMON,05,Existing print contact face retained,15,gyroid,standard/default,c6f2a4077331e347d821f42ba7f2c5671a3a2dafe4289384dd8c79746481eab1,,,SP06
+Right_Spacer_tensioner_outer_ID06_R24,STL/Common/Right_Spacer_tensioner_outer_ID06_R24.stl,R24,PETG,1,COMMON,05,Existing print contact face retained,15,gyroid,standard/default,8ec88f1cb1babbf1c3719d15be6020bedc50d866087faef81ea405a5d9e3c80e,,,SP06
+Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24,STL/Common/Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl,R24,PETG,1,COMMON,05,Existing print contact face retained,15,gyroid,standard/default,15ae1e23103e2bde4b66ffe85066e6843a4f419b9c7c72b7e0d15eee565bf21e,,,SP04
+Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24,STL/Common/Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl,R24,PETG,1,COMMON,05,Existing print contact face retained,15,gyroid,standard/default,fd27a3575714f672553af692870313b6fc8d10fa859643bc0d7f48465f4f1748,,,SP04
+Left_Cover_tensioner_outer,STL/Common/Left_Cover_tensioner_outer.stl,Retained geometry,PETG,1,COMMON,05,Existing print contact face retained,15,gyroid,standard/default,d6d175df3d2e84d014bd88c859e31b46d66192fe9c9406fbaa0fce40c91cc43c,,,
+Right_Cover_tensioner_outer,STL/Common/Right_Cover_tensioner_outer.stl,Retained geometry,PETG,1,COMMON,05,Existing print contact face retained,15,gyroid,standard/default,5e5b1b47f668f7b8e378c3f30870bb8dedbd67da9b5d38dc929fabcc2aa3352b,,,
+Left_22T_idler_wheel_inner_half_R13,STL/Common/Left_22T_idler_wheel_inner_half_R13.stl,R13,PETG,1,COMMON,06,Existing print contact face retained,15,gyroid,standard/default,77b2859474ff1eb24162dbe9291a52d312956f78bfe3a573cfbd1106573ea07c,,,
+Left_22T_idler_wheel_outer_half_R13,STL/Common/Left_22T_idler_wheel_outer_half_R13.stl,R13,PETG,1,COMMON,06,Existing print contact face retained,15,gyroid,standard/default,48c6ae723a10b85903ec759c0ad38158bf2e82bcd3cbcaf6f9d82a8c79da4ae9,,,
+Right_22T_idler_wheel_inner_half_R13,STL/Common/Right_22T_idler_wheel_inner_half_R13.stl,R13,PETG,1,COMMON,06,Existing print contact face retained,15,gyroid,standard/default,e51beb8d4e27e6137f442ba4e177e749425769155171733927698e93d0a88866,,,
+Right_22T_idler_wheel_outer_half_R13,STL/Common/Right_22T_idler_wheel_outer_half_R13.stl,R13,PETG,1,COMMON,06,Existing print contact face retained,15,gyroid,standard/default,df4c4ca86480ca706b1b7ffc537102efae8bb24975c3af9fcb9249ad706befa5,,,
+Left_HEX12_drive_wheel_inner_half_R13,STL/Common/Left_HEX12_drive_wheel_inner_half_R13.stl,R13,PETG,1,COMMON,06,Existing print contact face retained,15,gyroid,standard/default,175fb4bb2be6d53f577b9ea9e66632386c060aa5ab73350b09abdb1e34e96aaf,,,
+Left_HEX12_drive_wheel_outer_half_R13,STL/Common/Left_HEX12_drive_wheel_outer_half_R13.stl,R13,PETG,1,COMMON,06,Existing print contact face retained,15,gyroid,standard/default,df54e36a434622e619b4a387bd571cca4d4e17812ecb3cace085e111443ee7b0,,,
+Right_HEX12_drive_wheel_inner_half_R13,STL/Common/Right_HEX12_drive_wheel_inner_half_R13.stl,R13,PETG,1,COMMON,06,Existing print contact face retained,15,gyroid,standard/default,9f1f62430da95d606acaabb43d780efebe6c83d32e0e0fcaa393666af18a766b,,,
+Right_HEX12_drive_wheel_outer_half_R13,STL/Common/Right_HEX12_drive_wheel_outer_half_R13.stl,R13,PETG,1,COMMON,06,Existing print contact face retained,15,gyroid,standard/default,e31109e78f8e906836b356bfc43dc7cc667bc2282af2c3c6d79dcbfc584de1ef,,,
+Left_625_road_wheel_-70_inner_half_R13,STL/Common/Left_625_road_wheel_-70_inner_half_R13.stl,R13,PETG,1,COMMON,07,Existing print contact face retained,15,gyroid,standard/default,2853ae9909ac647cbec61492814757dd80377637ab360da3164338cd4b3359c1,,,
+Left_625_road_wheel_-70_outer_half_R13,STL/Common/Left_625_road_wheel_-70_outer_half_R13.stl,R13,PETG,1,COMMON,07,Existing print contact face retained,15,gyroid,standard/default,cb161b90f7f84718b3c3c9c5f4418a6551f66d3770d51ca3b6dd1451d59a45e2,,,
+Left_625_road_wheel_70_inner_half_R13,STL/Common/Left_625_road_wheel_70_inner_half_R13.stl,R13,PETG,1,COMMON,07,Existing print contact face retained,15,gyroid,standard/default,4719024ac6d6868f5a3ae79f772909eaeb3b2823d1fb1d564c503158ef30a432,,,
+Left_625_road_wheel_70_outer_half_R13,STL/Common/Left_625_road_wheel_70_outer_half_R13.stl,R13,PETG,1,COMMON,07,Existing print contact face retained,15,gyroid,standard/default,f63f3352e75cc5f5437dd9b722a6558ca09e136586e14b683a6df1f2f747ed83,,,
+Right_625_road_wheel_-70_inner_half_R13,STL/Common/Right_625_road_wheel_-70_inner_half_R13.stl,R13,PETG,1,COMMON,07,Existing print contact face retained,15,gyroid,standard/default,dda53ee702276735cb0fd20c5c6a8c5d5898bc973effe61b54b04075a6505ae6,,,
+Right_625_road_wheel_-70_outer_half_R13,STL/Common/Right_625_road_wheel_-70_outer_half_R13.stl,R13,PETG,1,COMMON,07,Existing print contact face retained,15,gyroid,standard/default,bf90f9142d1c21f6a0782ffdd230fdc646d87cf68315aaf4e34e91ae71054a12,,,
+Right_625_road_wheel_70_inner_half_R13,STL/Common/Right_625_road_wheel_70_inner_half_R13.stl,R13,PETG,1,COMMON,07,Existing print contact face retained,15,gyroid,standard/default,27ab947d33ffb6d00ef4c64a01983ce4762a3d8985f8882c6f559def0523e078,,,
+Right_625_road_wheel_70_outer_half_R13,STL/Common/Right_625_road_wheel_70_outer_half_R13.stl,R13,PETG,1,COMMON,07,Existing print contact face retained,15,gyroid,standard/default,a0b4ad354254f0028359a672cac85e8dfb8052693f4ff82584909b41b2318385,,,
+Left_625_road_wheel_0_inner_half_R13,STL/Common/Left_625_road_wheel_0_inner_half_R13.stl,R13,PETG,1,COMMON,07,Existing print contact face retained,15,gyroid,standard/default,4ce45005c7c12aecd50238fb96a8da8618bcc41a5c87a382db6d36ace37e5609,,,
+Left_625_road_wheel_0_outer_half_R13,STL/Common/Left_625_road_wheel_0_outer_half_R13.stl,R13,PETG,1,COMMON,07,Existing print contact face retained,15,gyroid,standard/default,e32df48974273d83368c671600f6e999b47bb7c8c3157a2bf7b6eb7f4084c6dd,,,
+Right_625_road_wheel_0_inner_half_R13,STL/Common/Right_625_road_wheel_0_inner_half_R13.stl,R13,PETG,1,COMMON,07,Existing print contact face retained,15,gyroid,standard/default,217d2f1043956286bc0b70df0b623aa66af5d481fe05d2c14ed78bd53cebd17f,,,
+Right_625_road_wheel_0_outer_half_R13,STL/Common/Right_625_road_wheel_0_outer_half_R13.stl,R13,PETG,1,COMMON,07,Existing print contact face retained,15,gyroid,standard/default,61bace863d4ea968db09b0188da129404218f71320c0a86765d7fe2977a01adf,,,
+XT30_distribution_base,STL/Common/XT30_distribution_base.stl,Retained geometry,PETG,1,COMMON,08,Existing print contact face retained,15,gyroid,standard/default,44993df950cc8bdfa87787a864453a295e5501f1aea82fb51551e71cafb05b27,,,
+XT30_distribution_lid,STL/Common/XT30_distribution_lid.stl,Retained geometry,PETG,1,COMMON,08,Existing print contact face retained,15,gyroid,standard/default,24f5e38779d4209306a1c65a5d62301984f695cba3ea27f7d915bc22ed1dfd6a,,,
+XT30_insulating_separator,STL/Common/XT30_insulating_separator.stl,Retained geometry,PETG,1,COMMON,08,Existing print contact face retained,15,gyroid,standard/default,135d6e6560ba2c33acd932894edf3bbe658ac52ed1e9c61e0f78152a010f0bc9,,,
+Left_Slider_outer,STL/Common/Left_Slider_outer.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,6813f1fd774ecaac418b789a7b44a54baa0b683bc97ee36af9a8b0670919c862,,,
+Left_Cover_motor_bearing,STL/Common/Left_Cover_motor_bearing.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,b1b206c886d907bf3e5598bb0f3b9c6e655c2fc5b957fe26b2f74eea1fbe3e6a,,,
+Right_Slider_outer,STL/Common/Right_Slider_outer.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,5ad05e25a2b4b15d010c1bc7580751cfd5ecd4b5a6d578c9273aa096a6819234,,,
+Right_Cover_motor_bearing,STL/Common/Right_Cover_motor_bearing.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,cda8be2d5f5fa140a902da06e479af39654f4c0d0612876c79e3554a4e2219a9,,,
+Left_inner_tensioner_slider,STL/Common/Left_inner_tensioner_slider.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,88407968a59708282b5dac31c75371258e0b4f0e65510573f04abb4967d485bc,,,
+Right_inner_tensioner_slider,STL/Common/Right_inner_tensioner_slider.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,093ef0a5bb83163079353a73e27dc9d56cdb666e3677b684f2f9615c2b318488,,,
+Left_Spacer_tensioner_retainer_inner_ID07_R24,STL/Common/Left_Spacer_tensioner_retainer_inner_ID07_R24.stl,R24,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,048d7d84043dc8c3c189128ee35d349206895bdea5d749190fd0547b22020d99,,,SP07
+Left_Spacer_tensioner_retainer_outer_ID08_R24,STL/Common/Left_Spacer_tensioner_retainer_outer_ID08_R24.stl,R24,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,529c3c55098e1e9501e05599cc5184b6308c112224f177e3dc83fa4265eb6495,,,SP08
+Left_Spacer_tensioner_center,STL/Common/Left_Spacer_tensioner_center.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,c55f0f38adcd86ab697447cb757609ebf0fce6fb706d9dee1679f07b50570287,,,SP10
+Right_Spacer_tensioner_retainer_inner_ID07_R24,STL/Common/Right_Spacer_tensioner_retainer_inner_ID07_R24.stl,R24,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,96337f2d49c2c6f6e0956e00dc7930d256830ae6c0e7fd884670558682b7eedb,,,SP07
+Right_Spacer_tensioner_retainer_outer_ID08_R24,STL/Common/Right_Spacer_tensioner_retainer_outer_ID08_R24.stl,R24,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,a588baac08e00f51583b05e85d64afb71999af361dd870ab69259a2e67373fe3,,,SP08
+Right_Spacer_tensioner_center,STL/Common/Right_Spacer_tensioner_center.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,ad89b490adc96b0027b2ed54da2b92dc66339e9da44393c9539a9b121c9cb7cd,,,SP10
+Left_Spacer_road_wheel_-70_center,STL/Common/Left_Spacer_road_wheel_-70_center.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,99bc1d990afdb67c553560384303e923ed13e0f98cc9f6a945827b9877e9913d,,,SP09
+Left_Spacer_road_wheel_0_center,STL/Common/Left_Spacer_road_wheel_0_center.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,b598c781ad2fbba193cafbff86cd2bd91c6d2d470d79f73d708c12ea52fbdadb,,,SP09
+Left_Spacer_road_wheel_70_center,STL/Common/Left_Spacer_road_wheel_70_center.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,932330cc7ea9d390cc703abb64cc9d33753bb33288cd29d130a008e13601f835,,,SP09
+Right_Spacer_road_wheel_-70_center,STL/Common/Right_Spacer_road_wheel_-70_center.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,5ef7fea491f5926faba6d4bba17456681bd384e843573188a7d8b942c9aa093f,,,SP09
+Right_Spacer_road_wheel_0_center,STL/Common/Right_Spacer_road_wheel_0_center.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,208521fbc3dcdccb5206578ddf754fcea8bd330f85b5113dc8a951c094b276a6,,,SP09
+Right_Spacer_road_wheel_70_center,STL/Common/Right_Spacer_road_wheel_70_center.stl,Retained geometry,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,7b08907ffe62c672600f838019f50fbd766dfcb76cc04f1c446edcdf8bf8bfae,,,SP09
+Left_Drive_bearing_to_collar_spacer_R12_C1,STL/Common/Left_Drive_bearing_to_collar_spacer_R12_C1.stl,R12-C1,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,48c99c9a472259abe14130a36cb309b5c4a5f7c7a1ad47759d74cb03f825490d,,,SP11
+Right_Drive_bearing_to_collar_spacer_R12_C1,STL/Common/Right_Drive_bearing_to_collar_spacer_R12_C1.stl,R12-C1,PETG,1,COMMON,09,Existing print contact face retained,15,gyroid,standard/default,48c99c9a472259abe14130a36cb309b5c4a5f7c7a1ad47759d74cb03f825490d,,,SP11
+Upper_cover_R9,STL/Common/Upper_cover_R9.stl,R9,PLA,1,COVER_ONE_PIECE,10,Rear edge down,15,gyroid,standard/default,cefcab0e8833cb79a537ca144d8cee725a2cd4e4a88fdc5d969d840c5405442e,One-piece upper cover,,
+14_Bin_20x10x2_magnet_pockets,STL/Common/14_Bin_20x10x2_magnet_pockets.stl,Retained geometry,PLA,1,COMMON,11,Existing print contact face retained,15,gyroid,standard/default,cc3a8925a56fba498727c7d3481013b0bd35c07c6c666ee1057ae276bfb3184c,,,
+Arm_Mounting_Platform_R22,STL/Common/Arm_Mounting_Platform_R22.stl,R22,PLA,1,COMMON,12,Flat underside down,15,gyroid,standard/default,4ceb00daa4abb8b30f56125d519a97a1d1b2b259f165d47348ecb8335a413fe9,,,
+SO101_Base,STL/Common/SO101_Base.stl,Retained geometry,PLA,1,COMMON,13,Existing print contact face retained,15,gyroid,standard/default,bb139655c24730bb3d0e1c5ee6c801cfae97c5d1c2ddeef3684801a22551128e,,,
+SO101_Shoulder_rotation,STL/Common/SO101_Shoulder_rotation.stl,Retained geometry,PLA,1,COMMON,13,Existing print contact face retained,15,gyroid,standard/default,0dbb9c84750ac6fd8e7b4529d407a1f4ef6e05f035d88d5d977d95d7d8e5bcf6,,,
+SO101_Base_motor_holder,STL/Common/SO101_Base_motor_holder.stl,Retained geometry,PLA,1,COMMON,13,Existing print contact face retained,15,gyroid,standard/default,517d5c0426b77fb9c77c1ee725efd16b50375557315db100d658cb3961d69768,,,
+SO101_Shoulder_bracket_cable_clip,STL/Common/SO101_Shoulder_bracket_cable_clip.stl,Retained geometry,PLA,1,COMMON,13,Existing print contact face retained,15,gyroid,standard/default,4441127a3a7260ffd03205706cf8de75efdad202701f7e9e4c1f17138f162a9c,,,
+SO101_Upper_arm_cable_clip,STL/Common/SO101_Upper_arm_cable_clip.stl,Retained geometry,PLA,1,COMMON,14,Existing print contact face retained,15,gyroid,standard/default,6f5bc515e84edf766f3836c878e7f905c05800e05bfef4e1c855eea87dcedd07,,,
+SO101_Forearm_cable_clip,STL/Common/SO101_Forearm_cable_clip.stl,Retained geometry,PLA,1,COMMON,14,Existing print contact face retained,15,gyroid,standard/default,46189448174ccb6c09b7f1c4e503e24b2fe513f4015345737cda6a4a9742b8dc,,,
+SO101_Wrist_cable_clip,STL/Common/SO101_Wrist_cable_clip.stl,Retained geometry,PLA,1,COMMON,14,Existing print contact face retained,15,gyroid,standard/default,cca0d36fd3f7792bffb75729ff278dcf0cd55573963f909a8492e712b31d8b3a,,,
+SO101_Wrist_bracket,STL/Common/SO101_Wrist_bracket.stl,Retained geometry,PLA,1,COMMON,14,Existing print contact face retained,15,gyroid,standard/default,2ed54e713657f810193759ee3b8436768801a27b30adb987d1c0af47870414aa,,,
+NC90_Right_side_shield,STL/Common/NC90_Right_side_shield.stl,Retained geometry,PLA,1,COMMON,15,Existing print contact face retained,15,gyroid,standard/default,446839e28af02c98fb8308961377aaa9c020ea65854f7aeafff0f136b3a5b788,,,
+NC90_Pinion,STL/Common/NC90_Pinion.stl,Retained geometry,PLA,1,COMMON,15,Existing print contact face retained,15,gyroid,standard/default,1b2745cd7558260526bf6b5384a845e550140289ceb2e5f03d2946562fe4c47b,,,
+NC90_Cable_guide,STL/Common/NC90_Cable_guide.stl,Retained geometry,PLA,1,COMMON,15,Existing print contact face retained,15,gyroid,standard/default,6e3cb92d5a9faee41409a960b28ff721dafd5ba9ff42fb5a8f73ce9767225d91,,,
+NC90_Right_jaw_extended_rack,STL/Common/NC90_Right_jaw_extended_rack.stl,Retained geometry,PLA,1,COMMON,15,Existing print contact face retained,15,gyroid,standard/default,e9be4ff4921b503968d1bebd5dcedda75220b9726f89fc03b202620eb229d0a1,,,
+Gripper_Camera_Mount_R30,STL/Common/Gripper_Camera_Mount_R30.stl,R30,PLA,1,COMMON,15,Supplied print orientation for current IMX335 B mount,15,gyroid,standard/default,93c1facf058472add5ea0a1e82e36b504f826fe2b126dd8ffaaf23beb24d4dd6,,,
+NC90_Left_side_shield,STL/Common/NC90_Left_side_shield.stl,Retained geometry,PLA,1,COMMON,15,Existing print contact face retained,15,gyroid,standard/default,65f6c80d3932bb9b12cc5dd9ff0c3951be56ebf5e3bd1abbb30c25a22bc9c3a8,,,
+NC90_Base_extended_rails,STL/Common/NC90_Base_extended_rails.stl,Retained geometry,PLA,1,COMMON,15,Existing print contact face retained,15,gyroid,standard/default,36b703cc677bb4940c0293e5f0d077895432f28c34b46e404cb8a28ba686dfef,,,
+NC90_Left_jaw_extended_rack,STL/Common/NC90_Left_jaw_extended_rack.stl,Retained geometry,PLA,1,COMMON,15,Existing print contact face retained,15,gyroid,standard/default,ce6cb5e53bf08f7d09371769ce6ae494def14caf3c044b87c84e2d06fd848da9,,,
+Left_Track_R78_70_Teeth,STL/Common/Left_Track_R78_70_Teeth.stl,R78,TPU,1,COMMON,16,"Flat side down; 70 teeth, 6.8 mm central guides",15,standard profile pattern (not gyroid),standard/default,d092d2bf59d6c6a89a8a82b96383cf3bd632fb41a7db1df81de91426a6ae5c4c,,,
+Right_Track_R78_70_Teeth,STL/Common/Right_Track_R78_70_Teeth.stl,R78,TPU,1,COMMON,17,Flat side down; same printable part as left,15,standard profile pattern (not gyroid),standard/default,d092d2bf59d6c6a89a8a82b96383cf3bd632fb41a7db1df81de91426a6ae5c4c,,,
+Pi_Adapter_R87,STL/Options/Pi_Adapter_R87.stl,R87,PETG,1,COMPUTE_PI,20,Flat underside down,15,gyroid,standard/default,d72e3c82705c3bc7b07b8fcf8b1320de7568322e36710dc834c5e7280dc6e33f,,,
+Gemini_Window_Adapter_R89,STL/Options/Gemini_Window_Adapter_R89.stl,R89,PETG,1,CAMERA_GEMINI,21,Flat front frame down; curved ends retained,15,gyroid,standard/default,35f3b273a4333afe83a155f0c3c107fb17c259550fb4febd2438d7b7edb20a3e,,,
+Jetson_Adapter_R87,STL/Options/Jetson_Adapter_R87.stl,R87,PETG,1,COMPUTE_JETSON,19,Flat underside down,15,gyroid,standard/default,3c8724a29c7588218bcfcc9821e5bb9c0a56695a9844ef8e6f8f425f984a4434,,,
+RealSense_Insert_R72,STL/Options/RealSense_Insert_R72.stl,R72,PETG,1,CAMERA_REALSENSE,22,Rear flat face down; top-entry screw-support key,15,gyroid,standard/default,2691a9936c8ffa76ae540b0a0e7b1522b1ec034c4c85ca18b2c02ef1ca79179d,,,
+Gemini_Flush_Insert_R72,STL/Options/Gemini_Flush_Insert_R72.stl,R72,PETG,1,CAMERA_GEMINI,21,Rear flat face down; plain top-entry key,15,gyroid,standard/default,fa70f045cbbcb3c0370f37ef9d027e5fde1cd465bf8b7efecf117df9c69978c6,,,
+Upper_Cover_R10_Rear,STL/Options/Upper_Cover_R10_Rear.stl,R10,PLA,1,COVER_SPLIT,10,Rear edge down; supplied STL orientation,15,gyroid,standard/default,1397c30e03f5b9cebcde141ea1eb1c1ed7712977ea8b8afcbda51ae7bf816b56,Split cover · rear section,CAD/Split_Cover_R10/Upper_Cover_R10_Rear.f3d,
+Upper_Cover_R10_Lidar_Extension,STL/Options/Upper_Cover_R10_Lidar_Extension.stl,R10,PLA,1,COVER_SPLIT,10,Front edge down; supplied STL orientation,15,gyroid,standard/default,7cf31ce9157252369f62117a5b107858dae5541747ab0301747a6b8bb0a673ef,Split cover · LiDAR extension,CAD/Split_Cover_R10/Upper_Cover_R10_Lidar_Extension.f3d,
diff --git a/hardware/mechanical/r92/data/printed_parts.json b/hardware/mechanical/r92/data/printed_parts.json
new file mode 100644
index 0000000..27a5b77
--- /dev/null
+++ b/hardware/mechanical/r92/data/printed_parts.json
@@ -0,0 +1,1782 @@
+{
+ "common_part_count": 102,
+ "configuration_counts": {
+ "JETSON_REALSENSE": 106,
+ "JETSON_GEMINI": 107,
+ "PI_REALSENSE": 106,
+ "PI_GEMINI": 107
+ },
+ "settings": {
+ "profile": "standard/default",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "tracks_pattern": "standard profile pattern, not gyroid",
+ "print_duration_displayed": false,
+ "printer_model_displayed": false
+ },
+ "parts": [
+ {
+ "part_id": "Hull_R92",
+ "file": "STL/Common/Hull_R92.stl",
+ "revision": "R92",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "HULL_ONE_PIECE",
+ "group_id": "01",
+ "orientation": "Flat exterior base down",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "b3cf069dee52f00744f2cd6a41ecebe5dbc6a40da43c806cc8442ee77f53fc83",
+ "display_name": "One-piece hull"
+ },
+ {
+ "part_id": "Hull_R92_Split_Rear_Motor_Computer",
+ "display_name": "Rear hull \u2014 motors and computer",
+ "file": "STL/Options/Hull_R92_Split_Rear_Motor_Computer.stl",
+ "revision": "R92 split",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "HULL_SPLIT",
+ "group_id": "01",
+ "orientation": "Flat exterior base down",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "02e1bc7b4f4755b0ca82ddd2a5242765e538a1483545c7483617ea75f468d951",
+ "cad_source": "CAD/Split_Hull_R92/Hull_R92_Split_Rear_Motor_Computer.f3d"
+ },
+ {
+ "part_id": "Hull_R92_Split_Front_Battery_Camera",
+ "display_name": "Front hull \u2014 battery and camera",
+ "file": "STL/Options/Hull_R92_Split_Front_Battery_Camera.stl",
+ "revision": "R92 split",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "HULL_SPLIT",
+ "group_id": "01",
+ "orientation": "Flat exterior base down",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "5f55175d4943ebde82d409dabb7b6ac6047e21f00a6836642135a2625c3fcb8d",
+ "cad_source": "CAD/Split_Hull_R92/Hull_R92_Split_Front_Battery_Camera.f3d"
+ },
+ {
+ "part_id": "Left_Outer_Track_Frame_R32",
+ "file": "STL/Common/Left_Outer_Track_Frame_R32.stl",
+ "revision": "R32",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "02",
+ "orientation": "Flat, 45 degrees: front-right to rear-left diagonal; centre on the plate. Supplied STL is already rotated. Print each outer frame separately.",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "ffd50dc1ac47ea15197934334c73fbf68cbf1d92c60fd80ece3b50206c860809"
+ },
+ {
+ "part_id": "Right_Outer_Track_Frame_R32",
+ "file": "STL/Common/Right_Outer_Track_Frame_R32.stl",
+ "revision": "R32",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "02",
+ "orientation": "Flat, 45 degrees: front-right to rear-left diagonal; centre on the plate. Supplied STL is already rotated. Print each outer frame separately.",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "0e6fe61167affa11301db8e77cf85b52a4668c521559f72761f5ee365adcfece"
+ },
+ {
+ "part_id": "Left_inner_tensioner_cover_R12_C2",
+ "file": "STL/Common/Left_inner_tensioner_cover_R12_C2.stl",
+ "revision": "R12-C2",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "02",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "a952c3ad0663b9c3c29b5aec4b6322c34917dfa3835eb8485884bc34a7fd6769"
+ },
+ {
+ "part_id": "Right_inner_tensioner_cover_R12_C2",
+ "file": "STL/Common/Right_inner_tensioner_cover_R12_C2.stl",
+ "revision": "R12-C2",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "02",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "d7413f0c1ccd1538aa9915b3fb4f87e10ba00368a04b0eb47e7779ff392595d2"
+ },
+ {
+ "part_id": "Left_inner_track_frame_R12_C2",
+ "file": "STL/Common/Left_inner_track_frame_R12_C2.stl",
+ "revision": "R12-C2",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "d78dfdd09c3dba1cb235a39028a1b3fa8a21275268d271384e5b88d341ffdeb0"
+ },
+ {
+ "part_id": "Right_inner_track_frame_R12_C2",
+ "file": "STL/Common/Right_inner_track_frame_R12_C2.stl",
+ "revision": "R12-C2",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "237aceddfc73351ad26fb6031196a8fa4afda64c631ae95b37c4f62336232d2c"
+ },
+ {
+ "part_id": "Left_Spacer_cross_member_-40",
+ "file": "STL/Common/Left_Spacer_cross_member_-40.stl",
+ "revision": "R12",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "db2a0fc7aebdfeec667c06aa9db338e11944392b0bb9312551a3d45597bb227a",
+ "assembly_ref": "SP12"
+ },
+ {
+ "part_id": "Left_Spacer_cross_member_40",
+ "file": "STL/Common/Left_Spacer_cross_member_40.stl",
+ "revision": "R12",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "db2a0fc7aebdfeec667c06aa9db338e11944392b0bb9312551a3d45597bb227a",
+ "assembly_ref": "SP12"
+ },
+ {
+ "part_id": "Right_Spacer_cross_member_-40",
+ "file": "STL/Common/Right_Spacer_cross_member_-40.stl",
+ "revision": "R12",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "06e68580425f6691ddf663ade31df700bf84bad7fba49cf648cb816f317cc49c",
+ "assembly_ref": "SP12"
+ },
+ {
+ "part_id": "Right_Spacer_cross_member_40",
+ "file": "STL/Common/Right_Spacer_cross_member_40.stl",
+ "revision": "R12",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "06e68580425f6691ddf663ade31df700bf84bad7fba49cf648cb816f317cc49c",
+ "assembly_ref": "SP12"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_-70_inner_ID01_R24",
+ "file": "STL/Common/Left_Spacer_road_wheel_-70_inner_ID01_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "6524a07fd66cedb81cf84308b0f46450325c479c0272bc87a90087f9ddc2b17e",
+ "assembly_ref": "SP01"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_0_inner_ID01_R24",
+ "file": "STL/Common/Left_Spacer_road_wheel_0_inner_ID01_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "8bf139e687b345b5a9948d4f7eaa0636aa1f58d454e4528a263ccac508487f27",
+ "assembly_ref": "SP01"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_70_inner_ID01_R24",
+ "file": "STL/Common/Left_Spacer_road_wheel_70_inner_ID01_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "a150e363c0c118268bcf706b412892c5aa652c1c5d6d476ffaab9d31aee62e03",
+ "assembly_ref": "SP01"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_-70_inner_ID01_R24",
+ "file": "STL/Common/Right_Spacer_road_wheel_-70_inner_ID01_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "1bef1f62c834dbfbfba2eb768cd209d17ffdc24903dbc9c34b05a8ebb730a714",
+ "assembly_ref": "SP01"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_0_inner_ID01_R24",
+ "file": "STL/Common/Right_Spacer_road_wheel_0_inner_ID01_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "61ae4a23632e7c0bee4c907359a0c7884c5fdfa47780f86573d6735502eea5e0",
+ "assembly_ref": "SP01"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_70_inner_ID01_R24",
+ "file": "STL/Common/Right_Spacer_road_wheel_70_inner_ID01_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "fc4e3e915b9da701c10504ddaf36249341d408334c1ac05f9a7c62de3d697c45",
+ "assembly_ref": "SP01"
+ },
+ {
+ "part_id": "Left_Spacer_tensioner_inner_ID05_R24",
+ "file": "STL/Common/Left_Spacer_tensioner_inner_ID05_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "1e966c06eb246e34d791411ec8ee111685d45df8c7c9554736f4bb0891309bd2",
+ "assembly_ref": "SP05"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_inner_ID05_R24",
+ "file": "STL/Common/Right_Spacer_tensioner_inner_ID05_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "e173d43b9ac337fad39d41f59533cf84a8beb1f64ebba9cab7b1d1a7f29f309a",
+ "assembly_ref": "SP05"
+ },
+ {
+ "part_id": "Left_Spacer_drive_inner_ID03_R24",
+ "file": "STL/Common/Left_Spacer_drive_inner_ID03_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "d80d8e7bd2ca3ac8e30ace2e8a3d5e320d52f6f77801e507bb830ea8da1c40d7",
+ "assembly_ref": "SP03"
+ },
+ {
+ "part_id": "Right_Spacer_drive_inner_ID03_R24",
+ "file": "STL/Common/Right_Spacer_drive_inner_ID03_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "03",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "0c4397ae14dc6a04e923b4eb3987af829bd69c734fee52bfc160ef7bcbeadfca",
+ "assembly_ref": "SP03"
+ },
+ {
+ "part_id": "02_Motor_access_hatch_10_screws",
+ "file": "STL/Common/02_Motor_access_hatch_10_screws.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "04",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "0ff371e953ece886833933eb11cfbb20c85fa29b277a6b483e8b59f4824cdd71"
+ },
+ {
+ "part_id": "Motor_Mount_Left_R90",
+ "file": "STL/Common/Motor_Mount_Left_R90.stl",
+ "revision": "R90",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "04",
+ "orientation": "Broad motor-facing flat face down",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "f570d1c1405bcb94ed911f226da8689d9e83fe02e97146cd5450150a0781a5f6"
+ },
+ {
+ "part_id": "Motor_Mount_Right_R90",
+ "file": "STL/Common/Motor_Mount_Right_R90.stl",
+ "revision": "R90",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "04",
+ "orientation": "Broad motor-facing flat face down",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "14966ecb934967dde73011f3d70092fb5f84ca31a4049be04df2a969c7704c30"
+ },
+ {
+ "part_id": "05_Left_bearing_retainer",
+ "file": "STL/Common/05_Left_bearing_retainer.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "04",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "03bfdb4cbc0deb83c3a42974dd037ed9d5c79e66cb981570f51c1acb8696151f"
+ },
+ {
+ "part_id": "06_Right_bearing_retainer",
+ "file": "STL/Common/06_Right_bearing_retainer.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "04",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "480fc16d3b4394bad091f4f5aa8f008b59668e8395a73ed7c2a6fe4917fe37c6"
+ },
+ {
+ "part_id": "Lidar_Base_R84",
+ "file": "STL/Common/Lidar_Base_R84.stl",
+ "revision": "R84",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "04",
+ "orientation": "Flat base down",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "cee5b2b9fda12df0160d8286a14e3c537af34daf2a312c69061bfbe1e417d89f"
+ },
+ {
+ "part_id": "Lidar_dovetail_carriage_R21",
+ "file": "STL/Common/Lidar_dovetail_carriage_R21.stl",
+ "revision": "R21",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "04",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "60c0045671823ab37e25e0e24d1d42149bb8dcefc07faf975a0ade4533dc31fb"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_-70_outer_ID02_R24",
+ "file": "STL/Common/Left_Spacer_road_wheel_-70_outer_ID02_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "05",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "c5c7fcd0d8116541a818eeb6e55941981b87d2a916a44f9b976cf8330c3cf227",
+ "assembly_ref": "SP02"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_0_outer_ID02_R24",
+ "file": "STL/Common/Left_Spacer_road_wheel_0_outer_ID02_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "05",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "875a7fb90370f82182ce354eed878bba970934680529d34b0a8a102de59145ce",
+ "assembly_ref": "SP02"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_70_outer_ID02_R24",
+ "file": "STL/Common/Left_Spacer_road_wheel_70_outer_ID02_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "05",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "4cfb999727c117600a425c84bde5ff8733e9a14bb528c9740a29cc4868e10196",
+ "assembly_ref": "SP02"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_-70_outer_ID02_R24",
+ "file": "STL/Common/Right_Spacer_road_wheel_-70_outer_ID02_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "05",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "de31cbd031c782c3107d50c7febb4dab425f9c0034ad1e0f48811295dcfc06eb",
+ "assembly_ref": "SP02"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_0_outer_ID02_R24",
+ "file": "STL/Common/Right_Spacer_road_wheel_0_outer_ID02_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "05",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "1e7b6f15070d21643fd6f477fe4f2e814fb328e11d0044816886fd61909e5cbf",
+ "assembly_ref": "SP02"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_70_outer_ID02_R24",
+ "file": "STL/Common/Right_Spacer_road_wheel_70_outer_ID02_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "05",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "9eecdcae413c2b41478da7d159cd409e6dfae95bd9d9ad02cf57f013570ee928",
+ "assembly_ref": "SP02"
+ },
+ {
+ "part_id": "Left_Spacer_tensioner_outer_ID06_R24",
+ "file": "STL/Common/Left_Spacer_tensioner_outer_ID06_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "05",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "c6f2a4077331e347d821f42ba7f2c5671a3a2dafe4289384dd8c79746481eab1",
+ "assembly_ref": "SP06"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_outer_ID06_R24",
+ "file": "STL/Common/Right_Spacer_tensioner_outer_ID06_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "05",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "8ec88f1cb1babbf1c3719d15be6020bedc50d866087faef81ea405a5d9e3c80e",
+ "assembly_ref": "SP06"
+ },
+ {
+ "part_id": "Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24",
+ "file": "STL/Common/Left_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "05",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "15ae1e23103e2bde4b66ffe85066e6843a4f419b9c7c72b7e0d15eee565bf21e",
+ "assembly_ref": "SP04"
+ },
+ {
+ "part_id": "Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24",
+ "file": "STL/Common/Right_Spacer_drive_outer_HEX12_L12.6_ID04_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "05",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "fd27a3575714f672553af692870313b6fc8d10fa859643bc0d7f48465f4f1748",
+ "assembly_ref": "SP04"
+ },
+ {
+ "part_id": "Left_Cover_tensioner_outer",
+ "file": "STL/Common/Left_Cover_tensioner_outer.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "05",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "d6d175df3d2e84d014bd88c859e31b46d66192fe9c9406fbaa0fce40c91cc43c"
+ },
+ {
+ "part_id": "Right_Cover_tensioner_outer",
+ "file": "STL/Common/Right_Cover_tensioner_outer.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "05",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "5e5b1b47f668f7b8e378c3f30870bb8dedbd67da9b5d38dc929fabcc2aa3352b"
+ },
+ {
+ "part_id": "Left_22T_idler_wheel_inner_half_R13",
+ "file": "STL/Common/Left_22T_idler_wheel_inner_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "06",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "77b2859474ff1eb24162dbe9291a52d312956f78bfe3a573cfbd1106573ea07c"
+ },
+ {
+ "part_id": "Left_22T_idler_wheel_outer_half_R13",
+ "file": "STL/Common/Left_22T_idler_wheel_outer_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "06",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "48c6ae723a10b85903ec759c0ad38158bf2e82bcd3cbcaf6f9d82a8c79da4ae9"
+ },
+ {
+ "part_id": "Right_22T_idler_wheel_inner_half_R13",
+ "file": "STL/Common/Right_22T_idler_wheel_inner_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "06",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "e51beb8d4e27e6137f442ba4e177e749425769155171733927698e93d0a88866"
+ },
+ {
+ "part_id": "Right_22T_idler_wheel_outer_half_R13",
+ "file": "STL/Common/Right_22T_idler_wheel_outer_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "06",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "df4c4ca86480ca706b1b7ffc537102efae8bb24975c3af9fcb9249ad706befa5"
+ },
+ {
+ "part_id": "Left_HEX12_drive_wheel_inner_half_R13",
+ "file": "STL/Common/Left_HEX12_drive_wheel_inner_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "06",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "175fb4bb2be6d53f577b9ea9e66632386c060aa5ab73350b09abdb1e34e96aaf"
+ },
+ {
+ "part_id": "Left_HEX12_drive_wheel_outer_half_R13",
+ "file": "STL/Common/Left_HEX12_drive_wheel_outer_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "06",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "df54e36a434622e619b4a387bd571cca4d4e17812ecb3cace085e111443ee7b0"
+ },
+ {
+ "part_id": "Right_HEX12_drive_wheel_inner_half_R13",
+ "file": "STL/Common/Right_HEX12_drive_wheel_inner_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "06",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "9f1f62430da95d606acaabb43d780efebe6c83d32e0e0fcaa393666af18a766b"
+ },
+ {
+ "part_id": "Right_HEX12_drive_wheel_outer_half_R13",
+ "file": "STL/Common/Right_HEX12_drive_wheel_outer_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "06",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "e31109e78f8e906836b356bfc43dc7cc667bc2282af2c3c6d79dcbfc584de1ef"
+ },
+ {
+ "part_id": "Left_625_road_wheel_-70_inner_half_R13",
+ "file": "STL/Common/Left_625_road_wheel_-70_inner_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "07",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "2853ae9909ac647cbec61492814757dd80377637ab360da3164338cd4b3359c1"
+ },
+ {
+ "part_id": "Left_625_road_wheel_-70_outer_half_R13",
+ "file": "STL/Common/Left_625_road_wheel_-70_outer_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "07",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "cb161b90f7f84718b3c3c9c5f4418a6551f66d3770d51ca3b6dd1451d59a45e2"
+ },
+ {
+ "part_id": "Left_625_road_wheel_70_inner_half_R13",
+ "file": "STL/Common/Left_625_road_wheel_70_inner_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "07",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "4719024ac6d6868f5a3ae79f772909eaeb3b2823d1fb1d564c503158ef30a432"
+ },
+ {
+ "part_id": "Left_625_road_wheel_70_outer_half_R13",
+ "file": "STL/Common/Left_625_road_wheel_70_outer_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "07",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "f63f3352e75cc5f5437dd9b722a6558ca09e136586e14b683a6df1f2f747ed83"
+ },
+ {
+ "part_id": "Right_625_road_wheel_-70_inner_half_R13",
+ "file": "STL/Common/Right_625_road_wheel_-70_inner_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "07",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "dda53ee702276735cb0fd20c5c6a8c5d5898bc973effe61b54b04075a6505ae6"
+ },
+ {
+ "part_id": "Right_625_road_wheel_-70_outer_half_R13",
+ "file": "STL/Common/Right_625_road_wheel_-70_outer_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "07",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "bf90f9142d1c21f6a0782ffdd230fdc646d87cf68315aaf4e34e91ae71054a12"
+ },
+ {
+ "part_id": "Right_625_road_wheel_70_inner_half_R13",
+ "file": "STL/Common/Right_625_road_wheel_70_inner_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "07",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "27ab947d33ffb6d00ef4c64a01983ce4762a3d8985f8882c6f559def0523e078"
+ },
+ {
+ "part_id": "Right_625_road_wheel_70_outer_half_R13",
+ "file": "STL/Common/Right_625_road_wheel_70_outer_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "07",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "a0b4ad354254f0028359a672cac85e8dfb8052693f4ff82584909b41b2318385"
+ },
+ {
+ "part_id": "Left_625_road_wheel_0_inner_half_R13",
+ "file": "STL/Common/Left_625_road_wheel_0_inner_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "07",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "4ce45005c7c12aecd50238fb96a8da8618bcc41a5c87a382db6d36ace37e5609"
+ },
+ {
+ "part_id": "Left_625_road_wheel_0_outer_half_R13",
+ "file": "STL/Common/Left_625_road_wheel_0_outer_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "07",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "e32df48974273d83368c671600f6e999b47bb7c8c3157a2bf7b6eb7f4084c6dd"
+ },
+ {
+ "part_id": "Right_625_road_wheel_0_inner_half_R13",
+ "file": "STL/Common/Right_625_road_wheel_0_inner_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "07",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "217d2f1043956286bc0b70df0b623aa66af5d481fe05d2c14ed78bd53cebd17f"
+ },
+ {
+ "part_id": "Right_625_road_wheel_0_outer_half_R13",
+ "file": "STL/Common/Right_625_road_wheel_0_outer_half_R13.stl",
+ "revision": "R13",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "07",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "61bace863d4ea968db09b0188da129404218f71320c0a86765d7fe2977a01adf"
+ },
+ {
+ "part_id": "XT30_distribution_base",
+ "file": "STL/Common/XT30_distribution_base.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "08",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "44993df950cc8bdfa87787a864453a295e5501f1aea82fb51551e71cafb05b27"
+ },
+ {
+ "part_id": "XT30_distribution_lid",
+ "file": "STL/Common/XT30_distribution_lid.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "08",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "24f5e38779d4209306a1c65a5d62301984f695cba3ea27f7d915bc22ed1dfd6a"
+ },
+ {
+ "part_id": "XT30_insulating_separator",
+ "file": "STL/Common/XT30_insulating_separator.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "08",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "135d6e6560ba2c33acd932894edf3bbe658ac52ed1e9c61e0f78152a010f0bc9"
+ },
+ {
+ "part_id": "Left_Slider_outer",
+ "file": "STL/Common/Left_Slider_outer.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "6813f1fd774ecaac418b789a7b44a54baa0b683bc97ee36af9a8b0670919c862"
+ },
+ {
+ "part_id": "Left_Cover_motor_bearing",
+ "file": "STL/Common/Left_Cover_motor_bearing.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "b1b206c886d907bf3e5598bb0f3b9c6e655c2fc5b957fe26b2f74eea1fbe3e6a"
+ },
+ {
+ "part_id": "Right_Slider_outer",
+ "file": "STL/Common/Right_Slider_outer.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "5ad05e25a2b4b15d010c1bc7580751cfd5ecd4b5a6d578c9273aa096a6819234"
+ },
+ {
+ "part_id": "Right_Cover_motor_bearing",
+ "file": "STL/Common/Right_Cover_motor_bearing.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "cda8be2d5f5fa140a902da06e479af39654f4c0d0612876c79e3554a4e2219a9"
+ },
+ {
+ "part_id": "Left_inner_tensioner_slider",
+ "file": "STL/Common/Left_inner_tensioner_slider.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "88407968a59708282b5dac31c75371258e0b4f0e65510573f04abb4967d485bc"
+ },
+ {
+ "part_id": "Right_inner_tensioner_slider",
+ "file": "STL/Common/Right_inner_tensioner_slider.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "093ef0a5bb83163079353a73e27dc9d56cdb666e3677b684f2f9615c2b318488"
+ },
+ {
+ "part_id": "Left_Spacer_tensioner_retainer_inner_ID07_R24",
+ "file": "STL/Common/Left_Spacer_tensioner_retainer_inner_ID07_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "048d7d84043dc8c3c189128ee35d349206895bdea5d749190fd0547b22020d99",
+ "assembly_ref": "SP07"
+ },
+ {
+ "part_id": "Left_Spacer_tensioner_retainer_outer_ID08_R24",
+ "file": "STL/Common/Left_Spacer_tensioner_retainer_outer_ID08_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "529c3c55098e1e9501e05599cc5184b6308c112224f177e3dc83fa4265eb6495",
+ "assembly_ref": "SP08"
+ },
+ {
+ "part_id": "Left_Spacer_tensioner_center",
+ "file": "STL/Common/Left_Spacer_tensioner_center.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "c55f0f38adcd86ab697447cb757609ebf0fce6fb706d9dee1679f07b50570287",
+ "assembly_ref": "SP10"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_retainer_inner_ID07_R24",
+ "file": "STL/Common/Right_Spacer_tensioner_retainer_inner_ID07_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "96337f2d49c2c6f6e0956e00dc7930d256830ae6c0e7fd884670558682b7eedb",
+ "assembly_ref": "SP07"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_retainer_outer_ID08_R24",
+ "file": "STL/Common/Right_Spacer_tensioner_retainer_outer_ID08_R24.stl",
+ "revision": "R24",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "a588baac08e00f51583b05e85d64afb71999af361dd870ab69259a2e67373fe3",
+ "assembly_ref": "SP08"
+ },
+ {
+ "part_id": "Right_Spacer_tensioner_center",
+ "file": "STL/Common/Right_Spacer_tensioner_center.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "ad89b490adc96b0027b2ed54da2b92dc66339e9da44393c9539a9b121c9cb7cd",
+ "assembly_ref": "SP10"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_-70_center",
+ "file": "STL/Common/Left_Spacer_road_wheel_-70_center.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "99bc1d990afdb67c553560384303e923ed13e0f98cc9f6a945827b9877e9913d",
+ "assembly_ref": "SP09"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_0_center",
+ "file": "STL/Common/Left_Spacer_road_wheel_0_center.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "b598c781ad2fbba193cafbff86cd2bd91c6d2d470d79f73d708c12ea52fbdadb",
+ "assembly_ref": "SP09"
+ },
+ {
+ "part_id": "Left_Spacer_road_wheel_70_center",
+ "file": "STL/Common/Left_Spacer_road_wheel_70_center.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "932330cc7ea9d390cc703abb64cc9d33753bb33288cd29d130a008e13601f835",
+ "assembly_ref": "SP09"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_-70_center",
+ "file": "STL/Common/Right_Spacer_road_wheel_-70_center.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "5ef7fea491f5926faba6d4bba17456681bd384e843573188a7d8b942c9aa093f",
+ "assembly_ref": "SP09"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_0_center",
+ "file": "STL/Common/Right_Spacer_road_wheel_0_center.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "208521fbc3dcdccb5206578ddf754fcea8bd330f85b5113dc8a951c094b276a6",
+ "assembly_ref": "SP09"
+ },
+ {
+ "part_id": "Right_Spacer_road_wheel_70_center",
+ "file": "STL/Common/Right_Spacer_road_wheel_70_center.stl",
+ "revision": "Retained geometry",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "7b08907ffe62c672600f838019f50fbd766dfcb76cc04f1c446edcdf8bf8bfae",
+ "assembly_ref": "SP09"
+ },
+ {
+ "part_id": "Left_Drive_bearing_to_collar_spacer_R12_C1",
+ "file": "STL/Common/Left_Drive_bearing_to_collar_spacer_R12_C1.stl",
+ "revision": "R12-C1",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "48c99c9a472259abe14130a36cb309b5c4a5f7c7a1ad47759d74cb03f825490d",
+ "assembly_ref": "SP11"
+ },
+ {
+ "part_id": "Right_Drive_bearing_to_collar_spacer_R12_C1",
+ "file": "STL/Common/Right_Drive_bearing_to_collar_spacer_R12_C1.stl",
+ "revision": "R12-C1",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "09",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "48c99c9a472259abe14130a36cb309b5c4a5f7c7a1ad47759d74cb03f825490d",
+ "assembly_ref": "SP11"
+ },
+ {
+ "part_id": "Upper_cover_R9",
+ "file": "STL/Common/Upper_cover_R9.stl",
+ "revision": "R9",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COVER_ONE_PIECE",
+ "group_id": "10",
+ "orientation": "Rear edge down",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "cefcab0e8833cb79a537ca144d8cee725a2cd4e4a88fdc5d969d840c5405442e",
+ "display_name": "One-piece upper cover"
+ },
+ {
+ "part_id": "14_Bin_20x10x2_magnet_pockets",
+ "file": "STL/Common/14_Bin_20x10x2_magnet_pockets.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "11",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "cc3a8925a56fba498727c7d3481013b0bd35c07c6c666ee1057ae276bfb3184c"
+ },
+ {
+ "part_id": "Arm_Mounting_Platform_R22",
+ "file": "STL/Common/Arm_Mounting_Platform_R22.stl",
+ "revision": "R22",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "12",
+ "orientation": "Flat underside down",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "4ceb00daa4abb8b30f56125d519a97a1d1b2b259f165d47348ecb8335a413fe9"
+ },
+ {
+ "part_id": "SO101_Base",
+ "file": "STL/Common/SO101_Base.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "13",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "bb139655c24730bb3d0e1c5ee6c801cfae97c5d1c2ddeef3684801a22551128e"
+ },
+ {
+ "part_id": "SO101_Shoulder_rotation",
+ "file": "STL/Common/SO101_Shoulder_rotation.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "13",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "0dbb9c84750ac6fd8e7b4529d407a1f4ef6e05f035d88d5d977d95d7d8e5bcf6"
+ },
+ {
+ "part_id": "SO101_Base_motor_holder",
+ "file": "STL/Common/SO101_Base_motor_holder.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "13",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "517d5c0426b77fb9c77c1ee725efd16b50375557315db100d658cb3961d69768"
+ },
+ {
+ "part_id": "SO101_Shoulder_bracket_cable_clip",
+ "file": "STL/Common/SO101_Shoulder_bracket_cable_clip.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "13",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "4441127a3a7260ffd03205706cf8de75efdad202701f7e9e4c1f17138f162a9c"
+ },
+ {
+ "part_id": "SO101_Upper_arm_cable_clip",
+ "file": "STL/Common/SO101_Upper_arm_cable_clip.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "14",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "6f5bc515e84edf766f3836c878e7f905c05800e05bfef4e1c855eea87dcedd07"
+ },
+ {
+ "part_id": "SO101_Forearm_cable_clip",
+ "file": "STL/Common/SO101_Forearm_cable_clip.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "14",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "46189448174ccb6c09b7f1c4e503e24b2fe513f4015345737cda6a4a9742b8dc"
+ },
+ {
+ "part_id": "SO101_Wrist_cable_clip",
+ "file": "STL/Common/SO101_Wrist_cable_clip.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "14",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "cca0d36fd3f7792bffb75729ff278dcf0cd55573963f909a8492e712b31d8b3a"
+ },
+ {
+ "part_id": "SO101_Wrist_bracket",
+ "file": "STL/Common/SO101_Wrist_bracket.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "14",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "2ed54e713657f810193759ee3b8436768801a27b30adb987d1c0af47870414aa"
+ },
+ {
+ "part_id": "NC90_Right_side_shield",
+ "file": "STL/Common/NC90_Right_side_shield.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "15",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "446839e28af02c98fb8308961377aaa9c020ea65854f7aeafff0f136b3a5b788"
+ },
+ {
+ "part_id": "NC90_Pinion",
+ "file": "STL/Common/NC90_Pinion.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "15",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "1b2745cd7558260526bf6b5384a845e550140289ceb2e5f03d2946562fe4c47b"
+ },
+ {
+ "part_id": "NC90_Cable_guide",
+ "file": "STL/Common/NC90_Cable_guide.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "15",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "6e3cb92d5a9faee41409a960b28ff721dafd5ba9ff42fb5a8f73ce9767225d91"
+ },
+ {
+ "part_id": "NC90_Right_jaw_extended_rack",
+ "file": "STL/Common/NC90_Right_jaw_extended_rack.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "15",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "e9be4ff4921b503968d1bebd5dcedda75220b9726f89fc03b202620eb229d0a1"
+ },
+ {
+ "part_id": "Gripper_Camera_Mount_R30",
+ "file": "STL/Common/Gripper_Camera_Mount_R30.stl",
+ "revision": "R30",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "15",
+ "orientation": "Supplied print orientation for current IMX335 B mount",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "93c1facf058472add5ea0a1e82e36b504f826fe2b126dd8ffaaf23beb24d4dd6"
+ },
+ {
+ "part_id": "NC90_Left_side_shield",
+ "file": "STL/Common/NC90_Left_side_shield.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "15",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "65f6c80d3932bb9b12cc5dd9ff0c3951be56ebf5e3bd1abbb30c25a22bc9c3a8"
+ },
+ {
+ "part_id": "NC90_Base_extended_rails",
+ "file": "STL/Common/NC90_Base_extended_rails.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "15",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "36b703cc677bb4940c0293e5f0d077895432f28c34b46e404cb8a28ba686dfef"
+ },
+ {
+ "part_id": "NC90_Left_jaw_extended_rack",
+ "file": "STL/Common/NC90_Left_jaw_extended_rack.stl",
+ "revision": "Retained geometry",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "15",
+ "orientation": "Existing print contact face retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "ce6cb5e53bf08f7d09371769ce6ae494def14caf3c044b87c84e2d06fd848da9"
+ },
+ {
+ "part_id": "Left_Track_R78_70_Teeth",
+ "file": "STL/Common/Left_Track_R78_70_Teeth.stl",
+ "revision": "R78",
+ "material": "TPU",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "16",
+ "orientation": "Flat side down; 70 teeth, 6.8 mm central guides",
+ "infill_percent": 15,
+ "infill_pattern": "standard profile pattern (not gyroid)",
+ "profile": "standard/default",
+ "sha256": "d092d2bf59d6c6a89a8a82b96383cf3bd632fb41a7db1df81de91426a6ae5c4c"
+ },
+ {
+ "part_id": "Right_Track_R78_70_Teeth",
+ "file": "STL/Common/Right_Track_R78_70_Teeth.stl",
+ "revision": "R78",
+ "material": "TPU",
+ "quantity": 1,
+ "scope": "COMMON",
+ "group_id": "17",
+ "orientation": "Flat side down; same printable part as left",
+ "infill_percent": 15,
+ "infill_pattern": "standard profile pattern (not gyroid)",
+ "profile": "standard/default",
+ "sha256": "d092d2bf59d6c6a89a8a82b96383cf3bd632fb41a7db1df81de91426a6ae5c4c"
+ },
+ {
+ "part_id": "Pi_Adapter_R87",
+ "file": "STL/Options/Pi_Adapter_R87.stl",
+ "revision": "R87",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMPUTE_PI",
+ "group_id": "20",
+ "orientation": "Flat underside down",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "d72e3c82705c3bc7b07b8fcf8b1320de7568322e36710dc834c5e7280dc6e33f"
+ },
+ {
+ "part_id": "Gemini_Window_Adapter_R89",
+ "file": "STL/Options/Gemini_Window_Adapter_R89.stl",
+ "revision": "R89",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "CAMERA_GEMINI",
+ "group_id": "21",
+ "orientation": "Flat front frame down; curved ends retained",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "35f3b273a4333afe83a155f0c3c107fb17c259550fb4febd2438d7b7edb20a3e"
+ },
+ {
+ "part_id": "Jetson_Adapter_R87",
+ "file": "STL/Options/Jetson_Adapter_R87.stl",
+ "revision": "R87",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "COMPUTE_JETSON",
+ "group_id": "19",
+ "orientation": "Flat underside down",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "3c8724a29c7588218bcfcc9821e5bb9c0a56695a9844ef8e6f8f425f984a4434"
+ },
+ {
+ "part_id": "RealSense_Insert_R72",
+ "file": "STL/Options/RealSense_Insert_R72.stl",
+ "revision": "R72",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "CAMERA_REALSENSE",
+ "group_id": "22",
+ "orientation": "Rear flat face down; top-entry screw-support key",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "2691a9936c8ffa76ae540b0a0e7b1522b1ec034c4c85ca18b2c02ef1ca79179d"
+ },
+ {
+ "part_id": "Gemini_Flush_Insert_R72",
+ "file": "STL/Options/Gemini_Flush_Insert_R72.stl",
+ "revision": "R72",
+ "material": "PETG",
+ "quantity": 1,
+ "scope": "CAMERA_GEMINI",
+ "group_id": "21",
+ "orientation": "Rear flat face down; plain top-entry key",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "fa70f045cbbcb3c0370f37ef9d027e5fde1cd465bf8b7efecf117df9c69978c6"
+ },
+ {
+ "part_id": "Upper_Cover_R10_Rear",
+ "file": "STL/Options/Upper_Cover_R10_Rear.stl",
+ "revision": "R10",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COVER_SPLIT",
+ "group_id": "10",
+ "orientation": "Rear edge down; supplied STL orientation",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "1397c30e03f5b9cebcde141ea1eb1c1ed7712977ea8b8afcbda51ae7bf816b56",
+ "display_name": "Split cover \u00b7 rear section",
+ "cad_source": "CAD/Split_Cover_R10/Upper_Cover_R10_Rear.f3d"
+ },
+ {
+ "part_id": "Upper_Cover_R10_Lidar_Extension",
+ "file": "STL/Options/Upper_Cover_R10_Lidar_Extension.stl",
+ "revision": "R10",
+ "material": "PLA",
+ "quantity": 1,
+ "scope": "COVER_SPLIT",
+ "group_id": "10",
+ "orientation": "Front edge down; supplied STL orientation",
+ "infill_percent": 15,
+ "infill_pattern": "gyroid",
+ "profile": "standard/default",
+ "sha256": "7cf31ce9157252369f62117a5b107858dae5541747ab0301747a6b8bb0a673ef",
+ "display_name": "Split cover \u00b7 LiDAR extension",
+ "cad_source": "CAD/Split_Cover_R10/Upper_Cover_R10_Lidar_Extension.f3d"
+ }
+ ],
+ "hull_configuration_counts": {
+ "ONE_PIECE": {
+ "JETSON_REALSENSE": 106,
+ "JETSON_GEMINI": 107,
+ "PI_REALSENSE": 106,
+ "PI_GEMINI": 107
+ },
+ "SPLIT": {
+ "JETSON_REALSENSE": 107,
+ "JETSON_GEMINI": 108,
+ "PI_REALSENSE": 107,
+ "PI_GEMINI": 108
+ }
+ },
+ "cover_configuration_delta": {
+ "ONE_PIECE": 0,
+ "SPLIT": 1
+ },
+ "configuration_matrix": [
+ {
+ "hull": "ONE_PIECE",
+ "cover": "ONE_PIECE",
+ "computer": "JETSON",
+ "camera": "REALSENSE",
+ "pieces": 106
+ },
+ {
+ "hull": "ONE_PIECE",
+ "cover": "ONE_PIECE",
+ "computer": "JETSON",
+ "camera": "GEMINI",
+ "pieces": 107
+ },
+ {
+ "hull": "ONE_PIECE",
+ "cover": "ONE_PIECE",
+ "computer": "PI",
+ "camera": "REALSENSE",
+ "pieces": 106
+ },
+ {
+ "hull": "ONE_PIECE",
+ "cover": "ONE_PIECE",
+ "computer": "PI",
+ "camera": "GEMINI",
+ "pieces": 107
+ },
+ {
+ "hull": "ONE_PIECE",
+ "cover": "SPLIT",
+ "computer": "JETSON",
+ "camera": "REALSENSE",
+ "pieces": 107
+ },
+ {
+ "hull": "ONE_PIECE",
+ "cover": "SPLIT",
+ "computer": "JETSON",
+ "camera": "GEMINI",
+ "pieces": 108
+ },
+ {
+ "hull": "ONE_PIECE",
+ "cover": "SPLIT",
+ "computer": "PI",
+ "camera": "REALSENSE",
+ "pieces": 107
+ },
+ {
+ "hull": "ONE_PIECE",
+ "cover": "SPLIT",
+ "computer": "PI",
+ "camera": "GEMINI",
+ "pieces": 108
+ },
+ {
+ "hull": "SPLIT",
+ "cover": "ONE_PIECE",
+ "computer": "JETSON",
+ "camera": "REALSENSE",
+ "pieces": 107
+ },
+ {
+ "hull": "SPLIT",
+ "cover": "ONE_PIECE",
+ "computer": "JETSON",
+ "camera": "GEMINI",
+ "pieces": 108
+ },
+ {
+ "hull": "SPLIT",
+ "cover": "ONE_PIECE",
+ "computer": "PI",
+ "camera": "REALSENSE",
+ "pieces": 107
+ },
+ {
+ "hull": "SPLIT",
+ "cover": "ONE_PIECE",
+ "computer": "PI",
+ "camera": "GEMINI",
+ "pieces": 108
+ },
+ {
+ "hull": "SPLIT",
+ "cover": "SPLIT",
+ "computer": "JETSON",
+ "camera": "REALSENSE",
+ "pieces": 108
+ },
+ {
+ "hull": "SPLIT",
+ "cover": "SPLIT",
+ "computer": "JETSON",
+ "camera": "GEMINI",
+ "pieces": 109
+ },
+ {
+ "hull": "SPLIT",
+ "cover": "SPLIT",
+ "computer": "PI",
+ "camera": "REALSENSE",
+ "pieces": 108
+ },
+ {
+ "hull": "SPLIT",
+ "cover": "SPLIT",
+ "computer": "PI",
+ "camera": "GEMINI",
+ "pieces": 109
+ }
+ ],
+ "release": "R92 / 2026-10-16"
+}