Skip to content

armgit / moss

Public Imported from GitHub
0

MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.

Python

Story: where it comes from, then what happened, in order

metrox9d2e82c6a465
diff --git a/STORY.md b/STORY.md
index e9f349e..52b7d5c 100644
--- a/STORY.md
+++ b/STORY.md
@@ -1,26 +1,35 @@
# The story so far
-## 15 September 2026, a video before a robot
+MOSS started with me cleaning my street by hand, two or three hours under the sun. In Thailand it rains a lot, and everything on the road ends up in the ocean. People go and clean the beaches as if the mess came from the sea; it comes from the streets. I didn't want to live in a dirty street, and I didn't want to burn either. So I built a robot.
-A 40-second concept video: a tracked rover with a bin and an arm, picking a can off the ground. Target cost said out loud: five to seven hundred dollars plus a computer. Nothing printed yet.
+The idea behind it is older than the robot. Years ago I printed an e-NABLE prosthetic hand, and I saw what happens when a design is free and a maker with a printer picks it up. If every maker with a workshop builds one or two small robots for their own neighbourhood, the litter problem gets solved everywhere at once. A parent and their kids build one over two or three weekends. There is electronics in it, programming, 3D printing, and at the end something useful rolls out the door.
-## 16–19 September, the print set
+## September 2026
-Two printers for three days. The bin and a track the first evening, the hull in black PETG on the 18th. By the 19th, 113 parts on the bench, shafts and bearings in bags next to them.
+**9 to 15 September.** The idea, said out loud on a bigger rover we already had: drive it in the street, pick up the trash, put it in a bin on the rover. Then the question that fixed the shape: what picks up more litter per hour than a person with a bag, for less money than the robots of the big labs? By hand, I fill three big bags in two hours on a covered roadside. A small arm does about one pick a minute. The robot wins on endurance, not speed: eight hours, at night. On the 15th, a 40-second concept video, before a single part existed.
-## 20 September, the motors turn
+**16 to 19 September.** Two printers for three days. The bin and a track the first evening, the hull in black PETG on the 18th. By the 19th, 113 parts on the bench, shafts and bearings in bags next to them.
-Both motors on the bench, encoders counting, driven by the ESP32 that would drive them on the rover. Same evening, the electronics went into the hull and the Jetson booted from the battery.
+**20 September.** Both motors turned on the bench, encoders counting. The same evening, the electronics went into the hull and the Jetson booted from the battery. I posted a 12-second clip of it, "MOSS is taking shape". By morning it had 49,000 views; by the next day 110,000, and a thousand new people following the build. That is when the project stopped being mine alone.
-## 22 September, first drive
+**22 September.** First drive. Tracks on, the rover moving and turning on the floor under its own motors, still tethered.
-Tracks on, the rover moving and turning on the floor under its own motors, still tethered. The tracks had slack: one tensioner per side is not enough. That went into the next revision the same day.
+**24 September.** The simulator went public, and the same day Jonathan Hawkins imported the MOSS body into his microduck-lab and started training a pick-up policy by reinforcement learning, 32 copies of the rover in parallel. First contributor from outside.
-## 26 September, the arm
+**26 September.** The arm. A standard SO-101 bolted on, with the NormaCore parallel-jaw gripper, widened to a 90 mm grip, and a camera in the hand. Folded over the bin, it looks like the video.
-A standard SO-101 bolted on, gripper included, with a camera in the hand. Folded over the bin, it looks like the video. A reader looked at the photo and said the shoulder looked weak. It became an issue on the repository.
+**28 and 29 September.** NormaCore, whose gripper is on the robot, granted us hardware and became the first partner. Dimensional, who make dimOS, the software MOSS runs on, approved a hardware grant the next day.
-## 1–3 October, the files are close
+**30 September.** Dirac Robotics offered to build a calibrated simulation of MOSS, so that what works in MuJoCo has a chance of working on the floor.
-V0.5, redrawn on the real robot, is the release candidate for the CAD. V0.6 makes the hardware modular: Pi or Jetson, RealSense or Gemini, same chassis. Kits and a build guide are coming with Tnkr; the waitlist opened. The files come out after one test: a full battery emptied over 3 km on the beach, tracks still on, no bolt lost.
+## October 2026
+**1 October.** V0.5, the CAD redrawn on the real robot, release candidate for the open source files, with a film to show it. The same evening, a call with Tnkr, who turn open source robots into kits: the parts in a box, with an assembly guide where you can look inside the robot.
+
+**2 October.** Tnkr announced, waitlist open. Jonathan published his results: 87 grasps out of 88 in simulation.
+
+**3 October.** V0.6 makes the hardware modular: Pi or Jetson, RealSense or Gemini, same chassis. And the "Meet the fam" card: OpenAI (Codex Physical Builds), Dimensional, NormaCore, Tnkr, Dirac Robotics, microduck-lab. We help each other.
+
+## Next
+
+The robot is being rebuilt with the V0.6 parts. The files come out after one test: a full battery emptied over 3 km on the beach, tracks still on, no bolt lost. No date. It is posted when it is real.