MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.
Python
BOM: battery, switch, fuses, XT30 as bought; power block 68
metrox9d7f513f1884
diff --git a/BOM.md b/BOM.mdindex cfc106b..a9000a2 100644--- a/BOM.md+++ b/BOM.md@@ -6,15 +6,15 @@ List prices in USD, one rover.| | Base assembly | Jetson + RealSense | Pi 5 + Hailo + Gemini | Pi 5 + Mighty ||---|---:|---:|---:|---:|-| Base assembly (everything below) | 482 | 482 | 482 | 482 |+| Base assembly (everything below) | 460 | 460 | 460 | 460 || Computer | | 414 | 215 | 215 || AI accelerator | | on board | 200 | none || Camera at the nose | | 419 | 234 | 92 || Wrist camera | | 19 | 19 | 19 || 2D lidar | | 69 | 69 | 69 |-| **Total** | **about $500** | **about $1,400** | **about $1,200** | **about $880** |+| **Total** | **about $460** | **about $1,390** | **about $1,200** | **about $860** |-## Jetson + RealSense, about $1,400+## Jetson + RealSense, about $1,390Base assembly, plus:@@ -41,7 +41,7 @@ Base assembly, plus:| Wrist camera, innomaker 1080p USB module, 32 × 32 mm | 1 | 19 || SLAMTEC RPLIDAR C1 | 1 | 69 |-## Pi 5 + Mighty, about $880+## Pi 5 + Mighty, about $860Base assembly, plus:@@ -54,14 +54,14 @@ Base assembly, plus:| Wrist camera, innomaker 1080p USB module, 32 × 32 mm | 1 | 19 || SLAMTEC RPLIDAR C1 | 1 | 69 |-## Base assembly, about $482+## Base assembly, about $460| Block | USD ||---|---:|| Control electronics | 49 || Drive | 30 || Arm and gripper | 160 |-| Power and wiring | 90 |+| Power and wiring | 68 || Mechanical hardware | 61 || Filament | 87 || Fans and magnets | 5 |@@ -90,15 +90,19 @@ Base assembly, plus:| ST3215 12 V bus servo | 5 | 22 | 110 || CF35-12 constant-force servo (gripper) | 1 | 50 | 50 |-### Power and wiring+### Power and wiring, about $68| Item | Qty | Unit | Line ||---|---:|---:|---:|-| 3S lithium pack with BMS | 1 | 35 | 35 |+| 12 V (3S) lithium pack, 7,200 mAh, with BMS, XH2.54 and DC jack leads | 1 | 21 | 21 || 12.6 V CC/CV charger | 1 | 12 | 12 |-| Emergency stop (16 mm), fuse holder, fuses, distribution | lot | 18 | 18 |-| Wiring, ferrules, heat-shrink, 2 × DC 5.5 × 2.1 mm panel sockets | lot | 15 | 15 |-| XT30 pairs: one input, four outputs (arm, computer, driver, fans) | 5 | | |+| Emergency stop LA16-11ZS/A, 16 mm | 1 | 2.25 | 2.25 |+| Rocker switch KCD11, 2-pin with leads, and its splash cover | 1 | 0.50 | 0.50 |+| Inline blade fuse holder, 14 AWG | 2 | 1.05 | 2.10 |+| ATC blade fuse 15 A (pack of 10) | 1 | 1.50 | 1.50 |+| Amass XT30 connector pair: one input, four outputs (arm, computer, driver, fans) | 5 | 0.80 | 4 |+| DC panel socket 5.5 × 2.1 mm, waterproof | 2 | 1.50 | 3 |+| Wiring, ferrules, heat-shrink | lot | 12 | 12 || USB cables for the controller and the servo adapter | lot | 10 | 10 |### Mechanical hardware, about $61diff --git a/README.md b/README.mdindex eee8011..8a917cf 100644--- a/README.md+++ b/README.md@@ -19,10 +19,10 @@ List prices for one rover, parts only.| Configuration | Parts ||---|---:|-| Base assembly: chassis, tracks, arm, gripper, power, filament | about $500 |-| + Jetson Orin Nano Super, RealSense D455, wrist camera, 2D lidar | about $1,400 |+| Base assembly: chassis, tracks, arm, gripper, power, filament | about $460 |+| + Jetson Orin Nano Super, RealSense D455, wrist camera, 2D lidar | about $1,390 || + Raspberry Pi 5, Hailo AI HAT, Orbbec Gemini 2, wrist camera, 2D lidar | about $1,200 |-| + Raspberry Pi 5, Mighty camera, wrist camera, 2D lidar | about $880 |+| + Raspberry Pi 5, Mighty camera, wrist camera, 2D lidar | about $860 |The Jetson configuration is the one on the bench. Every line is in the [BOM](BOM.md).