MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.
Python
Lessons: only what changes what a builder does; our own printing mistakes stay out
metroxb0d93525d7cc
diff --git a/3DPrinting.md b/3DPrinting.mdindex d7ce7ea..8280f08 100644--- a/3DPrinting.md+++ b/3DPrinting.md@@ -8,9 +8,7 @@| PLA (matte) | cover, bin, arm plate, SO-101 arm, gripper | big flat parts that print clean || TPU 95A | tracks, bin pads, gripper pads | grip |-Tracks: print with a 0.4 mm nozzle. The 0.8 mm nozzle makes them too stiff to run.--The hull is one piece, 328 mm long: it needs a large bed. A version split for 256 mm beds is not in the files yet. It is also the print that fails most often: level the bed and dry the PETG before it.+The hull is one piece, 328 mm long: it needs a large bed. A version split for 256 mm beds is not in the files yet.## Hull and body, PETGdiff --git a/docs/lessons.md b/docs/lessons.mdindex 541fae4..fdcd877 100644--- a/docs/lessons.md+++ b/docs/lessons.md@@ -1,15 +1,10 @@# What we learned the hard way-One line each. What happened, and what it changes for you.+One line each. What it changes for you.-1. **Print the tracks with a 0.4 mm nozzle.** The 0.8 mm nozzle makes them too stiff to run. The track profile that works is shipped with the files.-2. **One tensioner per track is not enough.** The first drive showed uneven tension and slack. V0.5 has two per side; fit both.-3. **No jumper wires on a rover.** Dupont connections made false contacts once the rover moved. The controller sits on a screw-terminal board.-4. **The INA219 reads voltage, not motor current.** The shunt was never in the motor line. Do not read its current field as if it were.-5. **Motor-mount screws need access from outside.** We drilled through the hull after assembly. The mounts now have exterior-access heads.-6. **Standard screw lengths only.** No custom cutting. The fastener list is in the [BOM](../BOM.md).-7. **The RealSense needs a right-angle USB cable.** The straight plug does not clear the hull. The cable is a line in the BOM.-8. **Small magnets are enough for the bin.** 20 × 10 × 2 mm, two in the cover, two in the bin.-9. **The arm had to move to make room for the lidar and clear the bin.** Keep the arm plate where the CAD puts it; the elbow already touches the bin when the arm is folded.-10. **Weigh the real robot before trusting the model.** The prototype came in at 3.5 kg without the arm; the first simulator export said 6.14 kg. A number copied often enough starts to look like a measurement.-11. **Put the rover on blocks for the first run.** Every time the firmware or the wiring changes.+1. **The INA219 reads battery voltage, not motor current.** The shunt is not in the motor line. Do not read its current field as if it were.+2. **The controller sits on a screw-terminal board.** Jumper wires make false contacts once the rover moves. Keep it that way.+3. **The RealSense needs the right-angle USB cable.** The straight plug does not clear the hull. It is a line in the BOM.+4. **Keep the arm plate where the CAD puts it.** The arm was moved to make room for the lidar and clear the bin; folded, the elbow already touches the bin.+5. **Weigh the real robot before trusting the model.** The prototype came in at 3.5 kg without the arm; the first simulator export said 6.14 kg. A number copied often enough starts to look like a measurement.+6. **Put the rover on blocks for the first run.** Every time the firmware or the wiring changes.