MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.
Python
media: tracks on, bin on, drivetrain CAD view (22 September)
metroxc73eeb8f65f7
diff --git a/README.md b/README.mdindex df1a49d..aa872e8 100644--- a/README.md+++ b/README.md@@ -16,7 +16,7 @@ MOSS is a small litter-picking rover you can print and build yourself: a trackedAll 113 printed parts are on the bench, with the shafts, bearings and screws to go with them. On 20 September the two drive motors ran for the first time, encoders counting, from the ESP32 that will drive them on the rover. By the evening the electronics were inside the chassis and the Jetson was booting from the battery. Some parts ended up elsewhere than the CAD planned; that is what a first prototype is for. On 22 September it rolled for the first time. The tracks still have some slack, a second tensioner per track is next.-+Every step is written down when it is real, good or bad. The [build log](docs/build_log.md) has the dates and the numbers, the [assembly feedback](docs/assembly_feedback.md) has what did not fit, the [roadmap](docs/roadmap.md) has what comes next, without dates.diff --git a/docs/build_log.md b/docs/build_log.mdindex 3144038..cc72b34 100644--- a/docs/build_log.md+++ b/docs/build_log.md@@ -97,9 +97,13 @@ The [new itemized budget](bom-costs.md) is $820 with Mighty or $821 with ST, com## 2026-09-22 — first drive++MOSS rolled for the first time today: tracks on, drivetrain assembled, the rover moving and turning on the floor under its own motors, still tethered for control. Video: [MOSS_first_drive_20260922.mp4](../media/video/MOSS_first_drive_20260922.mp4) (18 s).-What the first metres taught: the single-sided track adjustment leaves the tension uneven, so there is still some slack. Next hardware step: a second tensioner on each track. This is logged in [assembly_feedback.md](assembly_feedback.md). No autonomous behaviour yet; this is a drive test.+What the first metres taught: the single-sided track adjustment leaves the tension uneven, so there is still some slack. Next hardware step: a second tensioner on each track. This is logged in [assembly_feedback.md](assembly_feedback.md).++ No autonomous behaviour yet; this is a drive test.diff --git a/media/images/build_bin_on_20260922.jpg b/media/images/build_bin_on_20260922.jpgnew file mode 100644index 0000000..8e6ef7bBinary files /dev/null and b/media/images/build_bin_on_20260922.jpg differdiff --git a/media/images/build_tracks_on_20260922.jpg b/media/images/build_tracks_on_20260922.jpgnew file mode 100644index 0000000..07342c7Binary files /dev/null and b/media/images/build_tracks_on_20260922.jpg differdiff --git a/media/images/cad_track_drivetrain_20260922.png b/media/images/cad_track_drivetrain_20260922.pngnew file mode 100644index 0000000..6160153Binary files /dev/null and b/media/images/cad_track_drivetrain_20260922.png differ