MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.
Python
README: panorama of the full print set on the bench (stitched from the 19 September pan)
metroxcad1f2ac7e22
diff --git a/README.md b/README.mdindex 3eff864..0436e73 100644--- a/README.md+++ b/README.md@@ -10,6 +10,8 @@ MOSS is a small litter-picking rover you can print and build yourself: a tracked## Where it stands++All 113 printed parts are on the bench, with the shafts, bearings and screws to go with them. On 20 September the two drive motors ran for the first time, encoders counting, from the ESP32 that will drive them on the rover. That is the whole story so far: it runs on the bench, it does not roll yet. Next is putting the harness inside the chassis and making it drive.diff --git a/media/images/build_print_set_panorama_20260919.jpg b/media/images/build_print_set_panorama_20260919.jpgnew file mode 100644index 0000000..78a357cBinary files /dev/null and b/media/images/build_print_set_panorama_20260919.jpg differ