MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.
Python
V0.3: printed-parts inventory (111 pieces, md + json), build log 2026-09-19, README status dated 19/09, BOM by assembly, assembly feedback log, roadmap/hardware harmonized on V0.3 (documentation only)
metroxcfc579cb2461
diff --git a/README.md b/README.mdindex 70e243b..4e067d6 100644--- a/README.md+++ b/README.md@@ -6,29 +6,20 @@ MOSS is a small, mostly 3D-printed litter-picking rover: tracked base, a collect-This repository is the build log, the design files as they become real, and the software as it gets written. It started on 15 September 2026. Nothing here is finished; everything here is real. The animation above is the current CAD (every printed part, exploded and assembled); the photo below is the bench today. The concept video from 15 September (V2.3.1) shows an earlier design: almost everything changed since.+This repository is the build log, the design files as they become real, and the software as it gets written. It started on 15 September 2026. Nothing here is finished; everything here is real. The animation above is a CAD visualization from 18 September (the V0.3 exterior, exploded and assembled); newer cover studies are not the physical prototype. The photo below is the bench. The concept video from 15 September (V2.3.1) shows an earlier design: almost everything changed since.-## Status (18 September 2026)+## Status — V0.3 prototype, 19 September 2026-- Printed: main chassis (PETG), two flexible tracks (TPU 95A), collection bin and top cover (PLA), inner and outer side rails (two of each), cross spacers, motor brackets.-- First fit on the bench: the parts go together, with two or three small fit issues to correct in the next revision. Nothing bolted yet.-- Printing: drive and idler wheels (eight halves), track tensioners and bearing retainers.-- On the bench: Jetson Orin Nano 8 GB, Intel RealSense depth camera (mounted up front, access from above), Waveshare General Driver for Robots (ESP32), 2 × Cytron MD10C R3 motor drivers, 2 × geared motors with encoders, fuse holder, converter, interface modules.+- Printing is reported essentially complete for the chassis, bin and cover, track structure, wheels and rollers, tensioners, spacers, interior supports, the SO-101-derived arm and the NC90 gripper. See the [printed-parts inventory](docs/printed_parts.md): 111 pieces in the reconciled print set, plus two camera brackets to confirm.+- One TPU 95A track printed with a 0.8 mm nozzle is too stiff and will be reprinted. The first track has good flexibility and grip in manual floor tests.+- Assembly and fit checks continue. The corrected motor-bracket revision and the two RealSense mounting brackets still have to be confirmed on the bench before the print set is called fully reconciled.+- The unfinished front-cover interface stays on this prototype; its redesign is deferred to the next hardware revision.+- On the bench: Jetson Orin Nano 8 GB (in its original plastic base, inside the printed cartridge), Intel RealSense depth camera, Waveshare General Driver for Robots (ESP32), 2 × Cytron MD10C R3 motor drivers, 2 × geared motors with encoders, fuse holder, converter, interface modules.- Ordered: steel shafts (5/6/8 mm), bearings (608, 626), shaft collars, 6 mm couplings, M3 and M4 fasteners.-- Software: a scaffold derived from [vector-dimos](https://github.com/metrox-eth/vector-dimos) (gamepad teleop and differential-drive kinematics, cold-tested, not yet run on the rover).-- CAD: designed in Fusion 360; STL and STEP exports will land in `hardware/` as each part is validated by a real print.-- Next: fit the drivetrain, mount the arm, test on the ground.----## Plan--1. Print, build, and run the base on a real roadside, teleoperated with a gamepad on [dimOS](https://github.com/dimensionalOS/dimos).-2. Mount the arm and gripper; collect teleop demonstrations in the LeRobot dataset format.-3. Train a first pick-up policy on pooled data. The first video of an autonomous pick will be exactly that: autonomous, or it will not be posted.-4. Publish the design and the build documentation so others can build their own.+- Software: a scaffold (gamepad teleop logic and differential-drive kinematics, cold-tested, not yet run on the rover). No drive test or autonomous pickup has happened yet.+- Next: replace the stiff track, assemble and check the drivetrain, fit the arm and electronics, record the first powered tests when they happen.## Demodiff --git a/docs/assembly_feedback.md b/docs/assembly_feedback.mdnew file mode 100644index 0000000..a134c60--- /dev/null+++ b/docs/assembly_feedback.md@@ -0,0 +1,14 @@+# Assembly feedback — V0.3 prototype++One line per finding: what was observed, which part and revision, what was done on the prototype, what is planned for the next revision, and what validation actually happened. Nothing here is a completed drive test.++| Finding | Part / revision | On the prototype | Next revision | Validation done |+|---|---|---|---|---|+| TPU track too stiff | Track printed with a 0.8 mm nozzle | Reprint planned; keep the 0.4 mm profile (nozzle, extrusion width, walls, layer height, infill, material) as the reference | Record the full print profile with the part | First track: manual floor test, good flexibility and grip |+| Motor mounts | Corrected brackets Ø31 / M3 (files marked V2-01) | Confirm the corrected pair is the one fitted; check screw depth | — | Not yet |+| Motor mount to hull joint | Through-hole planned on the prototype | Drill through | Real through-joint designed in | Not yet |+| Front of the cover and offset arm plate | Cover, arm plate | Keep the unfinished interface as is | Complete-cover study, parked | — |+| Camera brackets | Two RealSense brackets in the CAD export | Locate or print them | — | Not found in the final numbered plates |+| Plate gasket | R8 gasket listed with the R11 plate | Check the real fit at assembly | — | Not yet |++Available M4 heat-set inserts are an option for the next revision, not a validated feature of this prototype.diff --git a/docs/bom.md b/docs/bom.mdindex f0c1864..9313dd7 100644--- a/docs/bom.md+++ b/docs/bom.md@@ -3,22 +3,30 @@Target: 500 to 700 USD in parts plus a Jetson, before tax and shipping. Prices are not listed yet; they will be once the first unit is complete and the list is stable.## Printed parts-| Part | Material | Printer used | Status |-|---|---|---|---|-| Track (×2) | TPU 95A | Bambu Lab P1S | printed |-| Collection bin | PLA | Bambu Lab H2S | printed |-| Top cover | PLA | H2S | printed |-| Main chassis | PETG (black) | H2S | printed |-| Inner side rails (×2) | PETG | P1S | printed |-| Cross spacers (×4) | PETG | P1S | printed |-| Outer side rails (×2) | PETG | P1S | printed |-| Motor brackets (×2) | PETG | P1S | printed |-| Drive and idler wheels (8 halves) | PETG | P1S | printing |-| Track tensioners + bearing retainers (12 parts) | PETG | P1S | printing |-| Splash-proof vent covers (×2) | PETG | — | printed |++The authoritative list is the [printed-parts inventory](printed_parts.md) (111 pieces in the reconciled V0.3 print set, per-part material, source file, print job and status; machine-readable copy in `printed_parts.json`). Summary by assembly:++| Assembly | Printed pieces | Notes |+|---|---:|---|+| Body (chassis, motor hatch, bin, cover) | 4 | chassis black PETG (H2S), bin and cover PLA |+| Tracks | 2 | TPU 95A; the 0.8 mm-nozzle track is too stiff, reprint planned |+| Side structure (inner and outer rails, cross spacers) | 8 | PETG |+| Ventilation (splash-proof vent covers) | 2 | PETG |+| Motor mounts | 2 | corrected revision to confirm on the bench |+| Wheels and rollers | 20 | 2 drive wheels (4 halves), 2 idlers (4 halves), 6 road rollers (12 halves) |+| Tensioners and bearing retainers | 12 | |+| Drivetrain spacers | 32 | small spacers, distinct from the 4 cross spacers |+| Gaskets | 3 | TPU |+| Interior supports | 8 | including 4 Jetson base retainers |+| SO-101-derived arm | 8 | clips integrated in the arm parts |+| NC90 gripper (derived from the NormaCore parallel gripper) | 8 | rigid parts |+| Gripper pads | 2 | TPU |+| **Total** | **111** | plus 2 RealSense brackets, printing to confirm |++Not printed: metal HEX12 hubs, bearings, shaft collars, motor–shaft couplings, servo horns, fasteners.## Electronics-- Jetson Orin Nano 8 GB (brain)+- Jetson Orin Nano 8 GB (brain), in its original plastic base- Intel RealSense depth camera- Waveshare controller board- 2 × Cytron MD10C R3 motor driversdiff --git a/docs/build_log.md b/docs/build_log.mdindex 30492cb..43599aa 100644--- a/docs/build_log.md+++ b/docs/build_log.md@@ -31,3 +31,15 @@ Printing now: the drivetrain, eight wheel halves (drive and idler wheels, 0.4 mmNext: fit the drivetrain, mount the arm, test on the ground.Video: `media/video/MOSS_build_log_02_20260918.mp4`.++## 2026-09-19 — V0.3 print set, assembly continues++The V0.3 prototype's print set is reported essentially complete: chassis and motor hatch, collection bin and cover, track structure, wheels and rollers, tensioners and spacers, interior supports, the SO-101-derived arm, the NC90 parallel gripper, gaskets and gripper pads. The [printed-parts inventory](printed_parts.md) reconciles the delivered print plans and records the remaining checks.++Two tracks have been printed in TPU 95A. The first has good flexibility and grip in manual floor tests. The second, printed with a 0.8 mm nozzle, is too stiff and will be reprinted. The successful 0.4 mm profile is the reference to preserve; the replacement is not yet reported complete.++The printed cover stays on this prototype. Closing the front around the offset arm plate is deferred to the next hardware revision. The complete-cover study is parked and is not part of this build.++Before calling the set fully reconciled, identify the corrected pair of motor brackets and locate the two RealSense mounting brackets: the latter exist in the CAD export but were not found in the final numbered print plates. This is a print and assembly update; it does not report a completed drive test or autonomous pickup.++Next: replace the stiff track, assemble and check the drivetrain, fit the arm and electronics, and record the first powered tests when they happen.diff --git a/docs/printed_parts.json b/docs/printed_parts.jsonnew file mode 100644index 0000000..848f6b9--- /dev/null+++ b/docs/printed_parts.json@@ -0,0 +1,1100 @@+{+ "as_of": "2026-09-19",+ "repository": "https://github.com/metrox-eth/moss",+ "reviewed_commit": "d22c513c2d5f866f8da212f4962d24a594859de1",+ "basis": "Builder reports that printing appears complete except one track replacement. Quantities reconstructed from delivered final print plans, not independently counted on the bench.",+ "expected_printed_units_in_reconciled_plan": 111,+ "additional_camera_brackets_to_reconcile": 2,+ "parts": [+ {+ "group": "Body",+ "part": "Main chassis / hull",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "Carter_PETG_continu_-_revision_mecanique_R8.stl",+ "print_job": "Standalone H2S chassis",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Body",+ "part": "Motor access hatch",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "Trappe_inferieure_acces_moteurs_R8.stl",+ "print_job": "Standalone hatch",+ "status": "reported_printed",+ "note": "R8 export reference; the precise revision of the physical hatch is not recorded."+ },+ {+ "group": "Body",+ "part": "Collection bin",+ "quantity": 1,+ "material": "Blue PLA",+ "source_file": "MOSS_bac_corrige.stl",+ "print_job": "Standalone H2S bin",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Body",+ "part": "Existing top cover R5",+ "quantity": 1,+ "material": "Blue PLA",+ "source_file": "MOSS_capot_monobloc_H2S_R5.stl",+ "print_job": "Standalone H2S cover",+ "status": "reported_printed",+ "note": "Keep the printed prototype cover. The unfinished front interface remains as-is; full-cover redesign is parked."+ },+ {+ "group": "Tracks",+ "part": "Continuous track R2",+ "quantity": 2,+ "material": "TPU 95A",+ "source_file": "MOSS_chenille_TPU95A_P1S_R2.stl",+ "print_job": "Standalone P1S tracks",+ "status": "one_accepted_one_reprint_planned",+ "note": "Two tracks have been printed. The first was reported flexible with good grip; the track printed with a 0.8 mm nozzle is too stiff and will be reprinted. Replacement has not been reported complete."+ },+ {+ "group": "Side structure",+ "part": "R8 G Entretoise traverse -40",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_traverse_-40_R8.stl",+ "print_job": "01 — P1S 0.8",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Side structure",+ "part": "R8 G Entretoise traverse 40",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_traverse_40_R8.stl",+ "print_job": "01 — P1S 0.8",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Side structure",+ "part": "R8 G Flanc interieur",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Flanc_interieur_R8.stl",+ "print_job": "01 — P1S 0.8",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Side structure",+ "part": "R8 D Entretoise traverse -40",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_traverse_-40_R8.stl",+ "print_job": "01 — P1S 0.8",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Side structure",+ "part": "R8 D Entretoise traverse 40",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_traverse_40_R8.stl",+ "print_job": "01 — P1S 0.8",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Side structure",+ "part": "R8 D Flanc interieur",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Flanc_interieur_R8.stl",+ "print_job": "01 — P1S 0.8",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Side structure",+ "part": "R8 G Flanc exterieur",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Flanc_exterieur_R8.stl",+ "print_job": "02 — P1S 0.8",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Side structure",+ "part": "R8 D Flanc exterieur",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Flanc_exterieur_R8.stl",+ "print_job": "03 — P1S 0.8",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Ventilation",+ "part": "Entree air sous carter - chicane demontable",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "Entree_air_sous_carter_-_chicane_demontable_R8.stl",+ "print_job": "03 — P1S 0.8",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Ventilation",+ "part": "Extraction air sous carter - chicane demontable",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "Extraction_air_sous_carter_-_chicane_demontable_R8.stl",+ "print_job": "03 — P1S 0.8",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Motor mounts",+ "part": "Corrected motor bracket G V2-01",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "MOSS_support_moteur_G_V2_01.stl",+ "print_job": "Standalone correction — P1S 0.4",+ "status": "physical_revision_to_confirm",+ "note": "Replaces the original plate-02 bracket; count once in the current build. Confirm the physical part is the corrected Ø31 mm M3 pattern, not the original bracket. Fit is not yet individually signed off."+ },+ {+ "group": "Motor mounts",+ "part": "Corrected motor bracket D V2-01",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "MOSS_support_moteur_D_V2_01.stl",+ "print_job": "Standalone correction — P1S 0.4",+ "status": "physical_revision_to_confirm",+ "note": "Replaces the original plate-02 bracket; count once in the current build. Confirm the physical part is the corrected Ø31 mm M3 pattern, not the original bracket. Fit is not yet individually signed off."+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_D_Roue_tendeuse_22d_demi-exterieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Roue_tendeuse_22d_demi-exterieure_R8.stl",+ "print_job": "04A — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_D_Roue_tendeuse_22d_demi-interieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Roue_tendeuse_22d_demi-interieure_R8.stl",+ "print_job": "04A — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_G_Roue_tendeuse_22d_demi-exterieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Roue_tendeuse_22d_demi-exterieure_R8.stl",+ "print_job": "04A — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_G_Roue_tendeuse_22d_demi-interieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Roue_tendeuse_22d_demi-interieure_R8.stl",+ "print_job": "04A — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8H_D_Roue_motrice_HEX12_demi_exterieure",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8H_D_Roue_motrice_HEX12_demi_exterieure.stl",+ "print_job": "04A — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8H_D_Roue_motrice_HEX12_demi_interieure",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8H_D_Roue_motrice_HEX12_demi_interieure.stl",+ "print_job": "04A — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8H_G_Roue_motrice_HEX12_demi_exterieure",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8H_G_Roue_motrice_HEX12_demi_exterieure.stl",+ "print_job": "04A — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8H_G_Roue_motrice_HEX12_demi_interieure",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8H_G_Roue_motrice_HEX12_demi_interieure.stl",+ "print_job": "04A — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_D_Galet625_-70_demi-exterieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Galet625_-70_demi-exterieure_R8.stl",+ "print_job": "04B — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_D_Galet625_-70_demi-interieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Galet625_-70_demi-interieure_R8.stl",+ "print_job": "04B — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_D_Galet625_0_demi-exterieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Galet625_0_demi-exterieure_R8.stl",+ "print_job": "04B — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_D_Galet625_0_demi-interieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Galet625_0_demi-interieure_R8.stl",+ "print_job": "04B — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_D_Galet625_70_demi-exterieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Galet625_70_demi-exterieure_R8.stl",+ "print_job": "04B — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_D_Galet625_70_demi-interieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Galet625_70_demi-interieure_R8.stl",+ "print_job": "04B — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_G_Galet625_-70_demi-exterieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Galet625_-70_demi-exterieure_R8.stl",+ "print_job": "04B — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_G_Galet625_-70_demi-interieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Galet625_-70_demi-interieure_R8.stl",+ "print_job": "04B — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_G_Galet625_0_demi-exterieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Galet625_0_demi-exterieure_R8.stl",+ "print_job": "04B — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_G_Galet625_0_demi-interieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Galet625_0_demi-interieure_R8.stl",+ "print_job": "04B — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_G_Galet625_70_demi-exterieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Galet625_70_demi-exterieure_R8.stl",+ "print_job": "04B — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Wheels and rollers",+ "part": "R8_G_Galet625_70_demi-interieure_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Galet625_70_demi-interieure_R8.stl",+ "print_job": "04B — P1S 0.4; replaces 04 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Tensioners and bearing retainers",+ "part": "R8_D_Couvercle_tendeur_exterieur_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Couvercle_tendeur_exterieur_R8.stl",+ "print_job": "05 — H2S 0.4",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Tensioners and bearing retainers",+ "part": "R8_D_Couvercle_tendeur_interieur_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Couvercle_tendeur_interieur_R8.stl",+ "print_job": "05 — H2S 0.4",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Tensioners and bearing retainers",+ "part": "R8_G_Couvercle_tendeur_exterieur_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Couvercle_tendeur_exterieur_R8.stl",+ "print_job": "05 — H2S 0.4",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Tensioners and bearing retainers",+ "part": "R8_G_Couvercle_tendeur_interieur_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Couvercle_tendeur_interieur_R8.stl",+ "print_job": "05 — H2S 0.4",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Tensioners and bearing retainers",+ "part": "R8_D_Coulisseau_exterieur_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Coulisseau_exterieur_R8.stl",+ "print_job": "05 — H2S 0.4",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Tensioners and bearing retainers",+ "part": "R8_D_Coulisseau_interieur_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Coulisseau_interieur_R8.stl",+ "print_job": "05 — H2S 0.4",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Tensioners and bearing retainers",+ "part": "R8_G_Coulisseau_exterieur_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Coulisseau_exterieur_R8.stl",+ "print_job": "05 — H2S 0.4",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Tensioners and bearing retainers",+ "part": "R8_G_Coulisseau_interieur_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Coulisseau_interieur_R8.stl",+ "print_job": "05 — H2S 0.4",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Tensioners and bearing retainers",+ "part": "R8_D_Couvercle_palier_moteur_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Couvercle_palier_moteur_R8.stl",+ "print_job": "05 — H2S 0.4",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Tensioners and bearing retainers",+ "part": "R8_G_Couvercle_palier_moteur_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Couvercle_palier_moteur_R8.stl",+ "print_job": "05 — H2S 0.4",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Tensioners and bearing retainers",+ "part": "Retenue_interieure_roulement_-1_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "Retenue_interieure_roulement_-1_R8.stl",+ "print_job": "05 — H2S 0.4",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Tensioners and bearing retainers",+ "part": "Retenue_interieure_roulement_1_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "Retenue_interieure_roulement_1_R8.stl",+ "print_job": "05 — H2S 0.4",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_galet_-70_centrale_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_galet_-70_centrale_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_galet_-70_externe_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_galet_-70_externe_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_galet_-70_interne_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_galet_-70_interne_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_galet_0_centrale_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_galet_0_centrale_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_galet_0_externe_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_galet_0_externe_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_galet_0_interne_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_galet_0_interne_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_galet_70_centrale_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_galet_70_centrale_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_galet_70_externe_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_galet_70_externe_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_galet_70_interne_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_galet_70_interne_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_tendeur_centrale_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_tendeur_centrale_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_tendeur_externe_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_tendeur_externe_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_tendeur_interne_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_tendeur_interne_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_tendeur_retenue_externe_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_tendeur_retenue_externe_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_tendeur_retenue_interne_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_tendeur_retenue_interne_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_galet_-70_centrale_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_galet_-70_centrale_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_galet_-70_externe_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_galet_-70_externe_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_galet_-70_interne_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_galet_-70_interne_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_galet_0_centrale_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_galet_0_centrale_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_galet_0_externe_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_galet_0_externe_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_galet_0_interne_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_galet_0_interne_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_galet_70_centrale_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_galet_70_centrale_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_galet_70_externe_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_galet_70_externe_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_galet_70_interne_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_galet_70_interne_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_tendeur_centrale_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_tendeur_centrale_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_tendeur_externe_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_tendeur_externe_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_tendeur_interne_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_tendeur_interne_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_tendeur_retenue_externe_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_tendeur_retenue_externe_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_tendeur_retenue_interne_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_tendeur_retenue_interne_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_D_Entretoise_motrice_interne_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_D_Entretoise_motrice_interne_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8_G_Entretoise_motrice_interne_R8",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8_G_Entretoise_motrice_interne_R8.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8H_D_Entretoise_motrice_externe_HEX12_L15_6",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8H_D_Entretoise_motrice_externe_HEX12_L15_6.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Drivetrain spacers",+ "part": "R8H_G_Entretoise_motrice_externe_HEX12_L15_6",+ "quantity": 1,+ "material": "Black PETG",+ "source_file": "R8H_G_Entretoise_motrice_externe_HEX12_L15_6.stl",+ "print_job": "06 — P1S 0.4; replaces 06 H2S",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Gaskets",+ "part": "Joint_trappe_moteurs_R8",+ "quantity": 1,+ "material": "TPU 95A",+ "source_file": "Joint_trappe_moteurs_R8.stl",+ "print_job": "07 joints — H2S 0.4",+ "status": "reported_printed",+ "note": "R8 gasket source; fit to assembled interfaces remains to be checked."+ },+ {+ "group": "Gaskets",+ "part": "Joint_sous_platine_-_appui_continu_R8",+ "quantity": 1,+ "material": "TPU 95A",+ "source_file": "Joint_sous_platine_-_appui_continu_R8.stl",+ "print_job": "07 joints — H2S 0.4",+ "status": "reported_printed",+ "note": "R8 gasket source; fit to assembled interfaces remains to be checked."+ },+ {+ "group": "Gaskets",+ "part": "R8_CAMERA_Joint_facade_D455_R8",+ "quantity": 1,+ "material": "TPU 95A",+ "source_file": "R8_CAMERA_Joint_facade_D455_R8.stl",+ "print_job": "07 joints — H2S 0.4",+ "status": "reported_printed",+ "note": "R8 gasket source; fit to assembled interfaces remains to be checked."+ },+ {+ "group": "Interior supports",+ "part": "Berceau_electronique_R11",+ "quantity": 1,+ "material": "Black PLA",+ "source_file": "Berceau_electronique_R11.stl",+ "print_job": "07A_berceau_PLA_noir",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Interior supports",+ "part": "Support_porte_fusible_R9",+ "quantity": 1,+ "material": "Black PLA",+ "source_file": "Support_porte_fusible_R9.stl",+ "print_job": "07A_berceau_PLA_noir",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Interior supports",+ "part": "Platine_bras_R11",+ "quantity": 1,+ "material": "Black PLA",+ "source_file": "Platine_bras_R11.stl",+ "print_job": "07B_platine_PLA_noir",+ "status": "reported_printed",+ "note": "Replacement arm plate, not an additional plate stacked on top of R8/R9."+ },+ {+ "group": "Interior supports",+ "part": "Retenue_socle_Jetson_R11",+ "quantity": 4,+ "material": "Black PLA",+ "source_file": "Retenue_socle_Jetson_R11.stl",+ "print_job": "07B_platine_PLA_noir",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Interior supports",+ "part": "Plateau_Jetson_R11",+ "quantity": 1,+ "material": "Black PLA",+ "source_file": "Plateau_Jetson_R11.stl",+ "print_job": "07C_Jetson_PLA_noir",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "SO-101 arm",+ "part": "SO101_Bras_superieur_clip",+ "quantity": 1,+ "material": "PLA — salmon in print plan",+ "source_file": "SO101_Bras_superieur_clip.stl",+ "print_job": "08_bras_PLA_saumon_01",+ "status": "reported_printed",+ "note": "Four cable clips are integrated into arm parts; no additional printed clip count."+ },+ {+ "group": "SO-101 arm",+ "part": "SO101_Avant_bras_clip",+ "quantity": 1,+ "material": "PLA — salmon in print plan",+ "source_file": "SO101_Avant_bras_clip.stl",+ "print_job": "08_bras_PLA_saumon_01",+ "status": "reported_printed",+ "note": "Four cable clips are integrated into arm parts; no additional printed clip count."+ },+ {+ "group": "SO-101 arm",+ "part": "SO101_Base",+ "quantity": 1,+ "material": "PLA — salmon in print plan",+ "source_file": "SO101_Base.stl",+ "print_job": "08_bras_PLA_saumon_01",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "SO-101 arm",+ "part": "SO101_Rotation_epaule",+ "quantity": 1,+ "material": "PLA — salmon in print plan",+ "source_file": "SO101_Rotation_epaule.stl",+ "print_job": "08_bras_PLA_saumon_01",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "SO-101 arm",+ "part": "SO101_Support_epaule_clip",+ "quantity": 1,+ "material": "PLA — salmon in print plan",+ "source_file": "SO101_Support_epaule_clip.stl",+ "print_job": "08_bras_PLA_saumon_01",+ "status": "reported_printed",+ "note": "Four cable clips are integrated into arm parts; no additional printed clip count."+ },+ {+ "group": "SO-101 arm",+ "part": "SO101_Base_motor_holder",+ "quantity": 1,+ "material": "PLA — salmon in print plan",+ "source_file": "SO101_Base_motor_holder.stl",+ "print_job": "08_bras_PLA_saumon_02",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "SO-101 arm",+ "part": "SO101_Poignet_clip",+ "quantity": 1,+ "material": "PLA — salmon in print plan",+ "source_file": "SO101_Poignet_clip.stl",+ "print_job": "08_bras_PLA_saumon_02",+ "status": "reported_printed",+ "note": "Four cable clips are integrated into arm parts; no additional printed clip count."+ },+ {+ "group": "SO-101 arm",+ "part": "SO101_Support_poignet",+ "quantity": 1,+ "material": "PLA — salmon in print plan",+ "source_file": "SO101_Support_poignet.stl",+ "print_job": "08_bras_PLA_saumon_02",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "NormaCore gripper",+ "part": "Corps_NC90",+ "quantity": 1,+ "material": "PLA — turquoise in print plan",+ "source_file": "Corps_NC90.stl",+ "print_job": "09_pince_PLA_turquoise",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "NormaCore gripper",+ "part": "Machoire_gauche_NC90",+ "quantity": 1,+ "material": "PLA — turquoise in print plan",+ "source_file": "Machoire_gauche_NC90.stl",+ "print_job": "09_pince_PLA_turquoise",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "NormaCore gripper",+ "part": "Machoire_droite_NC90",+ "quantity": 1,+ "material": "PLA — turquoise in print plan",+ "source_file": "Machoire_droite_NC90.stl",+ "print_job": "09_pince_PLA_turquoise",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "NormaCore gripper",+ "part": "Support_camera_NC90",+ "quantity": 1,+ "material": "PLA — turquoise in print plan",+ "source_file": "Support_camera_NC90.stl",+ "print_job": "09_pince_PLA_turquoise",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "NormaCore gripper",+ "part": "Flasque_1_NC90",+ "quantity": 1,+ "material": "PLA — turquoise in print plan",+ "source_file": "Flasque_1_NC90.stl",+ "print_job": "09_pince_PLA_turquoise",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "NormaCore gripper",+ "part": "Flasque_2_NC90",+ "quantity": 1,+ "material": "PLA — turquoise in print plan",+ "source_file": "Flasque_2_NC90.stl",+ "print_job": "09_pince_PLA_turquoise",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "NormaCore gripper",+ "part": "Pignon_NC90",+ "quantity": 1,+ "material": "PLA — turquoise in print plan",+ "source_file": "Pignon_NC90.stl",+ "print_job": "09_pince_PLA_turquoise",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "NormaCore gripper",+ "part": "Guide_cable_NC90",+ "quantity": 1,+ "material": "PLA — turquoise in print plan",+ "source_file": "Guide_cable_NC90.stl",+ "print_job": "09_pince_PLA_turquoise",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Gripper pads",+ "part": "Patin_TPU_gauche",+ "quantity": 1,+ "material": "TPU 95A",+ "source_file": "Patin_TPU_gauche.stl",+ "print_job": "10_patins_TPU95A",+ "status": "reported_printed",+ "note": ""+ },+ {+ "group": "Gripper pads",+ "part": "Patin_TPU_droit",+ "quantity": 1,+ "material": "TPU 95A",+ "source_file": "Patin_TPU_droit.stl",+ "print_job": "10_patins_TPU95A",+ "status": "reported_printed",+ "note": ""+ }+ ],+ "unconfirmed_additional_parts": [+ {+ "part": "D455 camera mounting bracket -1",+ "quantity": 1,+ "material": "PETG in original plan",+ "source_file": "R8_CAMERA_Equerre_D455_-1_R8.stl",+ "status": "printing_not_confirmed",+ "note": "Present in R8 CAD/STLs, not located in the final numbered print plates. Check the bench before adding a print job."+ },+ {+ "part": "D455 camera mounting bracket 1",+ "quantity": 1,+ "material": "PETG in original plan",+ "source_file": "R8_CAMERA_Equerre_D455_1_R8.stl",+ "status": "printing_not_confirmed",+ "note": "Present in R8 CAD/STLs, not located in the final numbered print plates. Check the bench before adding a print job."+ }+ ],+ "scope": "Prototype inventory only. No CAD/STL release approval or physical fit certification. Duplicate formats, superseded plates and failed/rejected designs excluded.",+ "prototype_version": "V0.3"+}diff --git a/docs/printed_parts.md b/docs/printed_parts.mdnew file mode 100644index 0000000..3172c64--- /dev/null+++ b/docs/printed_parts.md@@ -0,0 +1,257 @@+# MOSS V0.3 — prototype printed-parts inventory++Updated: **19 September 2026**.++The builder reports that printing appears complete, with one track to reprint. This inventory reconciles the final delivered print plans: **111 pieces in the intended current print set**, plus **two camera brackets whose printing is not confirmed**. It is not an independent physical count. Quantities are assembly requirements, not the cumulative number of prints, failed attempts or spares.++`reported_printed` follows that overall build update; it does not mean every part has been fitted or load-tested. The corrected motor-bracket revision still needs identification on the bench. The 0.8 mm track remains a replacement task.++## Current print feedback++- Two TPU 95A tracks have been printed. The first track was reported to have good flexibility and floor grip.+- The track made with the 0.8 mm nozzle is too stiff and is scheduled for reprinting; completion is not yet reported.+- Preserve the successful 0.4 mm print profile as the reference. Record nozzle, extrusion width, walls, layer height, infill and material together; the two prints do not isolate nozzle diameter as the only cause.+- The prototype front cover remains unfinished around the offset arm plate. The complete-cover redesign is parked for the next hardware revision and is excluded below.++## Reconciled quantities++| Assembly | Printed pieces |+|---|---:|+| Body | 4 |+| Tracks | 2 |+| Side structure | 8 |+| Ventilation | 2 |+| Motor mounts | 2 |+| Wheels and rollers | 20 |+| Tensioners and bearing retainers | 12 |+| Drivetrain spacers | 32 |+| Gaskets | 3 |+| Interior supports | 8 |+| SO-101 arm | 8 |+| NormaCore gripper | 8 |+| Gripper pads | 2 |+| **Total in the print plan** | **111** |++This includes 2 drive wheels made from 4 halves, 2 idler wheels made from 4 halves, 6 road rollers made from 12 halves, 32 small drivetrain spacers and 4 cross spacers. Metal hubs, bearings, shaft collars, servo horns and fasteners are not printed parts.++## Detailed inventory++G/D and −1/+1 retain the CAD naming so parts can be matched to their source files. Colour is taken from the print plan unless directly reported; no exact spool brand is inferred. Source filenames identify workshop revisions and are not download links or approved public releases.++### Body++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `Carter_PETG_continu_-_revision_mecanique_R8.stl` | 1 | Black PETG | Standalone H2S chassis | reported_printed |+| `Trappe_inferieure_acces_moteurs_R8.stl` | 1 | Black PETG | Standalone hatch | reported_printed |+| `MOSS_bac_corrige.stl` | 1 | Blue PLA | Standalone H2S bin | reported_printed |+| `MOSS_capot_monobloc_H2S_R5.stl` | 1 | Blue PLA | Standalone H2S cover | reported_printed |++- R8 export reference; the precise revision of the physical hatch is not recorded.+- Keep the printed prototype cover. The unfinished front interface remains as-is; full-cover redesign is parked.++### Tracks++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `MOSS_chenille_TPU95A_P1S_R2.stl` | 2 | TPU 95A | Standalone P1S tracks | one_accepted_one_reprint_planned |++- Two tracks have been printed. The first was reported flexible with good grip; the track printed with a 0.8 mm nozzle is too stiff and will be reprinted. Replacement has not been reported complete.++### Side structure++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `R8_G_Entretoise_traverse_-40_R8.stl` | 1 | Black PETG | 01 — P1S 0.8 | reported_printed |+| `R8_G_Entretoise_traverse_40_R8.stl` | 1 | Black PETG | 01 — P1S 0.8 | reported_printed |+| `R8_G_Flanc_interieur_R8.stl` | 1 | Black PETG | 01 — P1S 0.8 | reported_printed |+| `R8_D_Entretoise_traverse_-40_R8.stl` | 1 | Black PETG | 01 — P1S 0.8 | reported_printed |+| `R8_D_Entretoise_traverse_40_R8.stl` | 1 | Black PETG | 01 — P1S 0.8 | reported_printed |+| `R8_D_Flanc_interieur_R8.stl` | 1 | Black PETG | 01 — P1S 0.8 | reported_printed |+| `R8_G_Flanc_exterieur_R8.stl` | 1 | Black PETG | 02 — P1S 0.8 | reported_printed |+| `R8_D_Flanc_exterieur_R8.stl` | 1 | Black PETG | 03 — P1S 0.8 | reported_printed |++### Ventilation++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `Entree_air_sous_carter_-_chicane_demontable_R8.stl` | 1 | Black PETG | 03 — P1S 0.8 | reported_printed |+| `Extraction_air_sous_carter_-_chicane_demontable_R8.stl` | 1 | Black PETG | 03 — P1S 0.8 | reported_printed |++### Motor mounts++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `MOSS_support_moteur_G_V2_01.stl` | 1 | Black PETG | Standalone correction — P1S 0.4 | physical_revision_to_confirm |+| `MOSS_support_moteur_D_V2_01.stl` | 1 | Black PETG | Standalone correction — P1S 0.4 | physical_revision_to_confirm |++- Replaces the original plate-02 bracket; count once in the current build. Confirm the physical part is the corrected Ø31 mm M3 pattern, not the original bracket. Fit is not yet individually signed off.++### Wheels and rollers++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `R8_D_Roue_tendeuse_22d_demi-exterieure_R8.stl` | 1 | Black PETG | 04A — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_D_Roue_tendeuse_22d_demi-interieure_R8.stl` | 1 | Black PETG | 04A — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_G_Roue_tendeuse_22d_demi-exterieure_R8.stl` | 1 | Black PETG | 04A — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_G_Roue_tendeuse_22d_demi-interieure_R8.stl` | 1 | Black PETG | 04A — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8H_D_Roue_motrice_HEX12_demi_exterieure.stl` | 1 | Black PETG | 04A — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8H_D_Roue_motrice_HEX12_demi_interieure.stl` | 1 | Black PETG | 04A — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8H_G_Roue_motrice_HEX12_demi_exterieure.stl` | 1 | Black PETG | 04A — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8H_G_Roue_motrice_HEX12_demi_interieure.stl` | 1 | Black PETG | 04A — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_D_Galet625_-70_demi-exterieure_R8.stl` | 1 | Black PETG | 04B — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_D_Galet625_-70_demi-interieure_R8.stl` | 1 | Black PETG | 04B — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_D_Galet625_0_demi-exterieure_R8.stl` | 1 | Black PETG | 04B — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_D_Galet625_0_demi-interieure_R8.stl` | 1 | Black PETG | 04B — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_D_Galet625_70_demi-exterieure_R8.stl` | 1 | Black PETG | 04B — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_D_Galet625_70_demi-interieure_R8.stl` | 1 | Black PETG | 04B — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_G_Galet625_-70_demi-exterieure_R8.stl` | 1 | Black PETG | 04B — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_G_Galet625_-70_demi-interieure_R8.stl` | 1 | Black PETG | 04B — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_G_Galet625_0_demi-exterieure_R8.stl` | 1 | Black PETG | 04B — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_G_Galet625_0_demi-interieure_R8.stl` | 1 | Black PETG | 04B — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_G_Galet625_70_demi-exterieure_R8.stl` | 1 | Black PETG | 04B — P1S 0.4; replaces 04 H2S | reported_printed |+| `R8_G_Galet625_70_demi-interieure_R8.stl` | 1 | Black PETG | 04B — P1S 0.4; replaces 04 H2S | reported_printed |++### Tensioners and bearing retainers++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `R8_D_Couvercle_tendeur_exterieur_R8.stl` | 1 | Black PETG | 05 — H2S 0.4 | reported_printed |+| `R8_D_Couvercle_tendeur_interieur_R8.stl` | 1 | Black PETG | 05 — H2S 0.4 | reported_printed |+| `R8_G_Couvercle_tendeur_exterieur_R8.stl` | 1 | Black PETG | 05 — H2S 0.4 | reported_printed |+| `R8_G_Couvercle_tendeur_interieur_R8.stl` | 1 | Black PETG | 05 — H2S 0.4 | reported_printed |+| `R8_D_Coulisseau_exterieur_R8.stl` | 1 | Black PETG | 05 — H2S 0.4 | reported_printed |+| `R8_D_Coulisseau_interieur_R8.stl` | 1 | Black PETG | 05 — H2S 0.4 | reported_printed |+| `R8_G_Coulisseau_exterieur_R8.stl` | 1 | Black PETG | 05 — H2S 0.4 | reported_printed |+| `R8_G_Coulisseau_interieur_R8.stl` | 1 | Black PETG | 05 — H2S 0.4 | reported_printed |+| `R8_D_Couvercle_palier_moteur_R8.stl` | 1 | Black PETG | 05 — H2S 0.4 | reported_printed |+| `R8_G_Couvercle_palier_moteur_R8.stl` | 1 | Black PETG | 05 — H2S 0.4 | reported_printed |+| `Retenue_interieure_roulement_-1_R8.stl` | 1 | Black PETG | 05 — H2S 0.4 | reported_printed |+| `Retenue_interieure_roulement_1_R8.stl` | 1 | Black PETG | 05 — H2S 0.4 | reported_printed |++### Drivetrain spacers++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `R8_D_Entretoise_galet_-70_centrale_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_galet_-70_externe_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_galet_-70_interne_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_galet_0_centrale_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_galet_0_externe_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_galet_0_interne_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_galet_70_centrale_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_galet_70_externe_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_galet_70_interne_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_tendeur_centrale_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_tendeur_externe_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_tendeur_interne_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_tendeur_retenue_externe_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_tendeur_retenue_interne_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_galet_-70_centrale_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_galet_-70_externe_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_galet_-70_interne_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_galet_0_centrale_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_galet_0_externe_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_galet_0_interne_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_galet_70_centrale_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_galet_70_externe_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_galet_70_interne_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_tendeur_centrale_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_tendeur_externe_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_tendeur_interne_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_tendeur_retenue_externe_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_tendeur_retenue_interne_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_D_Entretoise_motrice_interne_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8_G_Entretoise_motrice_interne_R8.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8H_D_Entretoise_motrice_externe_HEX12_L15_6.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |+| `R8H_G_Entretoise_motrice_externe_HEX12_L15_6.stl` | 1 | Black PETG | 06 — P1S 0.4; replaces 06 H2S | reported_printed |++### Gaskets++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `Joint_trappe_moteurs_R8.stl` | 1 | TPU 95A | 07 joints — H2S 0.4 | reported_printed |+| `Joint_sous_platine_-_appui_continu_R8.stl` | 1 | TPU 95A | 07 joints — H2S 0.4 | reported_printed |+| `R8_CAMERA_Joint_facade_D455_R8.stl` | 1 | TPU 95A | 07 joints — H2S 0.4 | reported_printed |++- R8 gasket source; fit to assembled interfaces remains to be checked.++### Interior supports++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `Berceau_electronique_R11.stl` | 1 | Black PLA | 07A_berceau_PLA_noir | reported_printed |+| `Support_porte_fusible_R9.stl` | 1 | Black PLA | 07A_berceau_PLA_noir | reported_printed |+| `Platine_bras_R11.stl` | 1 | Black PLA | 07B_platine_PLA_noir | reported_printed |+| `Retenue_socle_Jetson_R11.stl` | 4 | Black PLA | 07B_platine_PLA_noir | reported_printed |+| `Plateau_Jetson_R11.stl` | 1 | Black PLA | 07C_Jetson_PLA_noir | reported_printed |++- Replacement arm plate, not an additional plate stacked on top of R8/R9.++### SO-101 arm++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `SO101_Bras_superieur_clip.stl` | 1 | PLA — salmon in print plan | 08_bras_PLA_saumon_01 | reported_printed |+| `SO101_Avant_bras_clip.stl` | 1 | PLA — salmon in print plan | 08_bras_PLA_saumon_01 | reported_printed |+| `SO101_Base.stl` | 1 | PLA — salmon in print plan | 08_bras_PLA_saumon_01 | reported_printed |+| `SO101_Rotation_epaule.stl` | 1 | PLA — salmon in print plan | 08_bras_PLA_saumon_01 | reported_printed |+| `SO101_Support_epaule_clip.stl` | 1 | PLA — salmon in print plan | 08_bras_PLA_saumon_01 | reported_printed |+| `SO101_Base_motor_holder.stl` | 1 | PLA — salmon in print plan | 08_bras_PLA_saumon_02 | reported_printed |+| `SO101_Poignet_clip.stl` | 1 | PLA — salmon in print plan | 08_bras_PLA_saumon_02 | reported_printed |+| `SO101_Support_poignet.stl` | 1 | PLA — salmon in print plan | 08_bras_PLA_saumon_02 | reported_printed |++- Four cable clips are integrated into arm parts; no additional printed clip count.++### NormaCore gripper++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `Corps_NC90.stl` | 1 | PLA — turquoise in print plan | 09_pince_PLA_turquoise | reported_printed |+| `Machoire_gauche_NC90.stl` | 1 | PLA — turquoise in print plan | 09_pince_PLA_turquoise | reported_printed |+| `Machoire_droite_NC90.stl` | 1 | PLA — turquoise in print plan | 09_pince_PLA_turquoise | reported_printed |+| `Support_camera_NC90.stl` | 1 | PLA — turquoise in print plan | 09_pince_PLA_turquoise | reported_printed |+| `Flasque_1_NC90.stl` | 1 | PLA — turquoise in print plan | 09_pince_PLA_turquoise | reported_printed |+| `Flasque_2_NC90.stl` | 1 | PLA — turquoise in print plan | 09_pince_PLA_turquoise | reported_printed |+| `Pignon_NC90.stl` | 1 | PLA — turquoise in print plan | 09_pince_PLA_turquoise | reported_printed |+| `Guide_cable_NC90.stl` | 1 | PLA — turquoise in print plan | 09_pince_PLA_turquoise | reported_printed |++### Gripper pads++| Part / source STL | Qty | Material | Plate / job | Status |+|---|---:|---|---|---|+| `Patin_TPU_gauche.stl` | 1 | TPU 95A | 10_patins_TPU95A | reported_printed |+| `Patin_TPU_droit.stl` | 1 | TPU 95A | 10_patins_TPU95A | reported_printed |++## Parts to locate before calling the set complete++| Part | Qty | Source | Status |+|---|---:|---|---|+| D455 camera mounting bracket -1 | 1 | `R8_CAMERA_Equerre_D455_-1_R8.stl` | Printing not confirmed; no final plate located |+| D455 camera mounting bracket 1 | 1 | `R8_CAMERA_Equerre_D455_1_R8.stl` | Printing not confirmed; no final plate located |++## Superseded or excluded++- Original R8 motor brackets from plate 02: replaced by V2-01. Do not count both pairs as current parts.+- Original drive-wheel interfaces: use R8H HEX12 wheel halves and the corresponding external 15.6 mm spacers. The motor-to-shaft couplings are separate metal hardware.+- H2S wheel plate 04: superseded by P1S plates 04A and 04B. H2S spacer plate 06: superseded by P1S plate 06.+- Old R8/R9 arm plate and Jetson support: use the R11 print set; four Jetson-base retainers are included.+- The four arm cable clips are integrated into SO-101 printed pieces. Servo horns and idler horns are hardware supplied with the servos.+- The standard SO-101 gripper is replaced by the NC90 parallel gripper; do not count both.+- XT60 front extension, rejected cover extensions, parked complete-cover study, fit coupons and demonstration cable geometry are excluded.+- No dedicated battery cradle is in the final printed set.++## Naming and release status++The builder confirms that the **current physical prototype is V0.3**. Update the repository references that still call it V0.1 or describe V0.3 as a future release. R8, R8H, R10, R11 and V2-01 inside filenames are historical component identifiers; retain them for traceability and do not treat them as the current robot version. The next hardware revision is not assigned a new number here. A successful print and an assembled, validated part are separate milestones.++## Source records++- `MOSS_lots_impression_20260917/MANIFESTE.json` and plate-02/03 contents.+- `MOSS_suite_fabrication_20260917/*/Contenu.md` for wheels, tensioners, spacers and gaskets.+- `MOSS_P1S_04_PETG_noir/LIRE.md` and `LIRE_06.md` for replacement P1S plates.+- `MOSS_PLA_suite_20260918/plaques.json` for interior supports, arm, gripper and pads.+- `MOSS_supports_moteurs_V2_01/LIRE_AVANT_MONTAGE.md` for the corrected bracket pair.+- Latest builder report on completion and track stiffness.++The accompanying [machine-readable inventory](printed_parts.json) carries the same quantities and status distinctions.diff --git a/docs/roadmap.md b/docs/roadmap.mdindex 84f668d..5f19e20 100644--- a/docs/roadmap.md+++ b/docs/roadmap.md@@ -1,6 +1,6 @@# Roadmap-- **Now (V0.1)**: print and assemble the prototype; every part that turns out odd or not optimal is corrected in the CAD right away, without reprinting. The corrected design is what gets published as **V0.3**, with the printable files and the fastener list. V0.1 is the bench prototype, not the release.+- **Now (V0.3 prototype)**: the print set is essentially complete; assemble, fit and check every part on the real thing. What turns out wrong is logged in [assembly_feedback.md](assembly_feedback.md); some fixes go on the prototype, the others into the next hardware revision (not numbered yet). Manufacturing files are published part by part once their validation is decided.- **Next**: first roadside run, teleoperated with a gamepad through dimOS; first recordings.- **Then**: mount the arm and gripper; collect pick-up demonstrations; publish the first pooled dataset.- **Later**: first policy; first autonomous pick on video; kits so the first hundred builders do not have to source parts themselves.diff --git a/hardware/README.md b/hardware/README.mdindex 9fc423f..5c51f60 100644--- a/hardware/README.md+++ b/hardware/README.md@@ -1,3 +1,5 @@# Hardware-Design in Fusion 360. The first prototype (V0.1) is being assembled from the first prints; whatever is odd or not optimal is corrected in the CAD as it is found, without reprinting. The corrected design, V0.3, is the one that will be published here: STL/STEP for every printed part, plus the fastener list (type, thread, length, head, quantity, and what goes into PETG with heat-set inserts). Until then, the photos in `media/` and the list in `docs/bom.md` are the reference.+Design in Fusion 360. The current prototype is **V0.3**, being assembled from its first print set (111 pieces, see `docs/printed_parts.md`). Fit problems are logged in `docs/assembly_feedback.md`: some are fixed on the prototype, the others wait for the next hardware revision, which has no number yet.++Manufacturing files (STL/STEP) are published here part by part once their validation is decided, with the fastener list (type, thread, length, head, quantity, what goes into PETG with inserts) and the sources they derive from (SO-101 arm, NormaCore gripper) with exact revisions and local changes. Until then, the photos in `media/`, the inventory and the BOM are the reference.