Skip to content

armgit / moss

Public Imported from GitHub
0

MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.

Python

docs: add MOSS Core V1D routed review and 3D preview

metr0xd3e12fc0223f
diff --git a/hardware/electronics/moss-core-v1d/README.md b/hardware/electronics/moss-core-v1d/README.md
new file mode 100644
index 0000000..6bbf8f0
--- /dev/null
+++ b/hardware/electronics/moss-core-v1d/README.md
@@ -0,0 +1,47 @@
+# MOSS Core V1D — routed design review
+
+**DRAFT — NOT FOR FABRICATION OR ASSEMBLY ORDER.** This is an untested prototype design, published for review. Routing is complete; manufacturing release, rover fit, firmware implementation and hardware qualification are still pending.
+
+**V1C — DO NOT FABRICATE:** the earlier V1C package has an incorrect SN74LVC2G08 second-gate physical-pin assignment in U10/U11. A clean ERC/DRC did not detect it. See the [critical erratum](V1C_CRITICAL_ERRATA.txt). The historical archive remains available for traceability.
+
+![MOSS Core V1D native 3D preview](PCB_3D_preview.png)
+
+*Native KiCad rendering of the routed draft. J5, U23 and F2 have no available 3D model in this preview; the ESP32 and watchdog use simplified envelopes. This image does not validate mechanical fit. See [preview notes](3D_PREVIEW_NOTES.json).*
+
+## Download and inspect
+
+- [Complete editable KiCad design and review package](MOSS_Core_V1D_Routed_DRAFT_Review_20261015.zip)
+- [Archive SHA-256](MOSS_Core_V1D_Routed_DRAFT_Review_20261015.zip.sha256)
+- [Schematic PDF](MOSS_Core_V1D_DRAFT_Schematic.pdf)
+- [Working BOM — not an order BOM](BOM_WORKING_NOT_FOR_ORDER.csv)
+- [Connector guide](CONNECTOR_GUIDE.txt)
+- [Routing status and exact design hashes](PCB_WORKING_STATUS.json)
+
+The full design is in `Integrated_Design/` inside the archive. Local symbols, footprints, available 3D models, static review evidence and the firmware porting contract are included. `Audio_Stage/` is an earlier subcircuit, not the complete board. The firmware folder contains a porting contract, not operational V1D firmware.
+
+![V1D routed PCB, top](PCB_Review_Top.png)
+![V1D routed PCB, bottom](PCB_Review_Bottom.png)
+
+## What changed from V1C
+
+- Separate hardware-controlled motor and servo power switches, downstream voltage monitoring, latched rail-loss faults and explicit re-arm behavior.
+- A powered three-pin serial-servo connector with half-duplex data buffers; the existing servo daisy chain is retained.
+- An integrated MAX98357A mono amplifier and battery-to-audio converter, with a PH2 speaker connector for the confirmed 4-ohm, 3 W speaker.
+- Inhibition of all four Cytron PWM/DIR inputs when motor power is invalid, plus the corrected V1C logic pin mapping.
+- A larger 80 × 85 mm, four-layer PCB, with four M2.5 mounting holes and 254 assembled components. Rover clearance has not been validated.
+
+The Cytron MDD10A remains external. The external USB hub and host-computer power converter also remain separate; this board is one USB peripheral, not an integrated USB hub or a replacement motor driver.
+
+## Evidence and remaining work
+
+The delivered native DRC reports zero violations, zero missing connections and zero schematic/PCB parity issues under the recorded project rules. These are static checks, not proof that a powered board works. The archive preserves the exact board hashes, review scope, ignored checks and remaining geometric findings.
+
+Before fabrication, review the return/decoupling findings, stackup, power and thermal assumptions, connector mating and physical integration. The current design assumes approximately **8.1 A total for the motor branch** and **2.5 A for the servo chain**; these are design assumptions, not measured performance guarantees. Regeneration/BMS behavior, startup loads, audio limiting and the V1D firmware still require validation before powered actuator tests.
+
+No manufacturing approval is provided by this publication. Planned initial quantity is two assembled prototypes after the required release checks.
+
+Hardware design: [CERN-OHL-S-2.0](../../../LICENSE-HARDWARE). Bundled KiCad library material retains its upstream license and exception, included in the ZIP. See [NOTICE](../../../NOTICE) for repository licensing.
+
+## Package provenance
+
+Published from the 2026-10-15 routed review snapshot. The PCB, schematic and library bytes are unchanged. An editor lock file was omitted, publication-status text was corrected, existing repository/upstream license notices were included, and the file manifest was regenerated. Historical evidence retains its original scope and may include local provenance paths.