MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.
Python
build log: prototype arm servos are salvaged ST3235, parts list stays ST3215
metroxf2c45a1f7dfa
diff --git a/docs/build_log.md b/docs/build_log.mdindex 07464c7..bdba4c0 100644--- a/docs/build_log.md+++ b/docs/build_log.md@@ -141,7 +141,7 @@ The arm is on the rover, gripper included. It is a standard SO-101 so far; the oTwo things learned by looking at it on the floor. The track chevrons point the wrong way for traction on this rover, so the tracks will be flipped. And a reader noticed that the second joint from the base, the shoulder, looks weak for a load-bearing joint. That is now [issue #2](https://github.com/metrox-eth/moss/issues/2), meant as a first contribution: check the load in the CAD, then propose either a dual-servo shoulder like the RoArm-M3 or a stronger bracket on the existing servo.-Weighed on 27 September, arm and gripper together, off the rover: 768 g. The 24 September note estimated 682 g from the reference SO-101 model plus a gripper allowance, so the estimate was 86 g light. Added to the base as weighed on 24 September (3.5 kg without the arm), that gives about 4.27 kg for the loaded rover, a sum, not a weighing; the assembled rover gets its own weighing once it is on the V0.4 hull.+Weighed on 27 September, arm and gripper together, off the rover: 768 g. The 24 September note estimated 682 g from the reference SO-101 model plus a gripper allowance, so the estimate was 86 g light. Added to the base as weighed on 24 September (3.5 kg without the arm), that gives about 4.27 kg for the loaded rover, a sum, not a weighing; the assembled rover gets its own weighing once it is on the V0.4 hull. Part of the extra mass is the servos: this prototype's arm runs ST3235 salvaged from older arms, heavier than the ST3215 the parts list recommends; builders should take the ST3215.The V0.4 print set has started. Asked the same day what eats the budget: the onboard computer and the perception sensors, by far. The Raspberry Pi version exists to bring that line down; the numbers are in the [itemized budget](bom-costs.md).