Skip to content

armgit / moss

Public Imported from GitHub
0

MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.

Python

build log: electronics in the chassis, Jetson on battery (20 September, evening)

metroxfbe0fc8a443f
diff --git a/README.md b/README.md
index 720dbfd..0775809 100644
--- a/README.md
+++ b/README.md
@@ -14,7 +14,7 @@ MOSS is a small litter-picking rover you can print and build yourself: a tracked
*We forgot to take the wide shot, so this is 41 frames of a phone pan stitched together. It wobbles a bit; the parts are real.*
-All 113 printed parts are on the bench, with the shafts, bearings and screws to go with them. On 20 September the two drive motors ran for the first time, encoders counting, from the ESP32 that will drive them on the rover. That is the whole story so far: it runs on the bench, it does not roll yet. Next is putting the harness inside the chassis and making it drive.
+All 113 printed parts are on the bench, with the shafts, bearings and screws to go with them. On 20 September the two drive motors ran for the first time, encoders counting, from the ESP32 that will drive them on the rover. By the evening the electronics were inside the chassis and the Jetson was booting from the battery. Some parts ended up elsewhere than the CAD planned; that is what a first prototype is for. It does not roll yet. Next is making it drive.
![The power and control harness on the bench, 20 September](media/images/build_harness_bench_20260920.jpg)
diff --git a/docs/build_log.md b/docs/build_log.md
index 88540fe..78fbe3e 100644
--- a/docs/build_log.md
+++ b/docs/build_log.md
@@ -76,3 +76,9 @@ Fuse for the motor bench tests: 5 A automotive blade, 32 V DC, same format as th
Next: integrate the harness into the chassis, set installed motor and encoder directions, measure ticks per revolution, then the Jetson interface and speed control. For the next hardware revision: mounts for the ESP32-S3, the servo adapter and the real distribution; the printed V0.3 stays the reference.
+## 2026-09-20 (evening) — electronics in the chassis, Jetson on battery
+
+First assembly of the electronics inside the printed chassis: motors, drivers, ESP32-S3, the pack in its bay, and the Jetson, which now boots from battery power. Video: [MOSS_first_assembly_20260920.mp4](../media/video/MOSS_first_assembly_20260920.mp4); still: [electronics in the chassis](../media/images/build_first_assembly_20260920.jpg).
+
+First reality checks: some components ended up elsewhere than planned in CAD. The differences go into [assembly_feedback.md](assembly_feedback.md) as they are measured, and into the next hardware revision. No drive test yet.
+
diff --git a/media/images/build_first_assembly_20260920.jpg b/media/images/build_first_assembly_20260920.jpg
new file mode 100644
index 0000000..18361fe
Binary files /dev/null and b/media/images/build_first_assembly_20260920.jpg differ
diff --git a/media/video/MOSS_first_assembly_20260920.mp4 b/media/video/MOSS_first_assembly_20260920.mp4
new file mode 100644
index 0000000..696d567
Binary files /dev/null and b/media/video/MOSS_first_assembly_20260920.mp4 differ