MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.
Python
Commits on main
launcher: tools/moss-fly.sh litter runs the litter chain behind the same gates as explore, the launcher keeps the arming
f32c23e metrox committed 1 month ago
litter: the detection on the nose camera (dimOS's object scene registration with a YOLO trained on litter), the mission (explore, stop, approach, servo to the pick point, pick over RPC, explore again), the moss-litter blueprint, a cold bench on a fake robot
686548e metrox committed 1 month ago
arm in dimOS: the moss-arm blueprint (the sim adapter on the CAD scene, the Feetech adapter on the robot), the cycle as one JointTrajectory, the executor with its following-error watch, two cold benches
bfc5079 metrox committed 1 month ago
arm drop: the pick-and-drop sequence as numbers (config/arm_drop_poses.json), tools/moss_arm_drop.py plan checks every move against the keep-out guard and the CAD scene, cold bench
f8bf35e metrox committed 1 month ago
arm: the keep-out table also covers a soda can held in the gripper
3c61760 metrox committed 1 month ago
arm sweep bench: the speed-without-clearance check reads the tool's text
ecbb34b metrox committed 1 month ago
arm sweep: --random (a random walk over the allowed cells) and --clearance (grid steps kept clear of any forbidden point, required above speed 400)
55d3bab metrox committed 1 month ago
arm: keep-out table regenerated on the CAD scene (every rover part by name, the arm's own base counted, the first ticks-to-model alignment)
e5378cd metrox committed 1 month ago
arm: tools/moss_arm_sweep.py, the slow tour of the arm's reach along the keep-out boundary, logged for a synchronized render
b8382cc metrox committed 1 month ago
dimOS main compatibility: moved imports with fallbacks, the camera mount on main, the relocalizer as a spectator (MOSS_RELOC_MAP)
5f5af17 metrox committed 1 month ago
costmap: a relocalized premap as an input (loaded_map + the world->map tf), behind MOSS_PREMAP
d703bdb metrox committed 1 month ago
arm: keep-out table swept on the simulation model, and the joint-space guard
fbf15b0 metrox committed 1 month ago
the floor lessons of the earlier rover come back: costmap guards, directional contacts, camera workers, speed guard, run film
0e94d04 metrox committed 1 month ago
cockpit: the stack stops itself when idle ("stopping the stack to preserve battery")
5f7293b metrox committed 1 month ago
sounds, gyro, odometry: the speaker stays awake, the gyro prior is the default, a contact no longer corrupts the map
f81b022 metrox committed 1 month ago
docs: the oblique contact signature (-28 m/s^2 forward, 19 sideways)
f4e4df5 metrox committed 1 month ago
docs: the IMU contact signature measured on the robot (rest 0.06, rolling up to 1.0, the box at -12.5 m/s^2)
8d0b81b metrox committed 1 month ago
IMU contacts on by default: colour, depth and IMU seen alive together on the robot at a stationary launch (199 Hz, gravity on -y); MOSS_IMU=0 goes back to the camera without IMU
9f36224 metrox committed 1 month ago
cockpit page: the decision panel sits under the map, above the cameras, with a bounded scrolling feed
c3f9556 metrox committed 1 month ago
arm calibration: --sweep measures every joint's end stops (unwrapped on the encoder circle), centres each travel on 2048 and writes offsets and limits; reads retried, the gripper keeps its own register map
3289468 metrox committed 1 month ago
README: supporters section (the $15 tier promises a name in the repo)
163c4e8 metrox committed 1 month ago
base: the floor keeps the curvature, every command is scaled for the pack voltage, and a pivot with one frozen track turns on the other track instead of counting as a contact
a458bc8 metrox committed 1 month ago
lidar odometry: deskew is opt-in (MOSS_DESKEW=1). On the rover kiss-icp's deskew fails at its first thread (pthread_create: Invalid argument), the odometry loop dies with it and the launcher stops the unproven stack; the default is the proven path
5155ca9 metrox committed 1 month ago
costmap: contact memory. A bump (the stall guard) marks the band just ahead of the body as a wall at once, so the planner routes around what the lidar and the camera did not see instead of driving into it again; freed by seen floor or the body
67a6987 metrox committed 1 month ago
sounds: a silent keep-awake clip every 4 min so the Bluetooth speaker in the bin never sleeps between cues
a3d3d6a metrox committed 1 month ago