Skip to content

Your Android phone and your Windows PC, working as one. Local-first, end-to-end encrypted, no account.

50.2 KB
Raw Blame

Changelog

All notable changes to NectarLink. Versions follow semantic versioning; before 1.0, a minor version may change things that need a step from you, and its notes say so.

Unreleased

New

  • Turkish. The Android and PC apps speak Turkish (Türkçe): pick it in Settings, or they follow the system's language. Thanks to @sedatdagg.
  • Your phone's sound on the PC, without mirroring. Phone sound on this PC on Home plays what the phone plays through the PC's speakers or headphones, with no mirror window. With Elevated it starts right away; otherwise the phone asks once, as for mirroring. The phone goes quiet meanwhile and its media volume comes back after (#94).
  • Sharing your PC's screen with the phone uses H.265 when both sides can, and H.264 otherwise. Thanks to @AS8148 (#66).
  • Hardware video for screen sharing on Linux. With FFmpeg 6 to 9 installed, sharing the PC's screen and showing a shared screen use the GPU (VAAPI, NVIDIA or Intel QSV) and fall back to software H.264 when it can't. Thanks to @AS8148 (#67).
  • Elevated over USB. Plug the phone into the PC with USB debugging allowed and Elevated starts by itself, without setting up Wireless debugging. It runs while the cable is in. The PC only starts NectarLink's own helper, on the phone that asked (#70).
  • Mirroring wakes the phone's screen. With Elevated, starting mirroring from the PC turns the phone's screen on if it's off, so the phone can stay in a pocket; a locked phone shows its lock screen in the window (#82).
  • Watch the PC and move its pointer at once. Control PC's Screen tab on the phone has a touchpad under the PC's screen (it hides in full screen). Thanks to @waytoo-average (#104).
  • Call or text a copied number from the command palette. Copy a phone number anywhere, open the palette with its shortcut, and Call and Text for that number are at the top (#83).
  • Connect over Tailscale. With Tailscale on the phone and the PC, they reach each other directly through it from different networks, without relays. Pair once while Tailscale is up on both. On Windows, mark the Tailscale network Private so the firewall lets it in (docs/technical/tailscale.md has the command). Thanks to @waytoo-average (#105).
  • Elevated through Shizuku. If you use Shizuku, Use Shizuku in Elevated's settings starts it through Shizuku instead of NectarLink's own Wireless debugging pairing, so it keeps working away from Wi-Fi while Shizuku runs. Shizuku asks once whether NectarLink may use it. The helper still runs as the shell user, never as root (#110).
  • Pick the SIM for a call from the PC. On a phone with two SIMs, the Calls page has Call with under the dial pad. It starts on the phone's default SIM for calls and remembers your pick for each phone. Before, the phone's own SIM prompt came up and the call didn't go out (#112).
  • Battery alerts for phones that stop charging at 80%. Settings has a Full charge target: at 80% (Protect battery), the PC tells you the phone is charged when it reaches 80% on the charger. Thanks to @Armone0 (#98).
  • Nicknames for your phones on the PC. Set nickname on Home names a paired phone for this PC only; leave it blank to use the phone's own name. Thanks to @Armone0 (#98).
  • The PC app on Linux, for Ubuntu 24.04 or newer, Debian 13, Fedora 40 or newer and other distributions from 2024 on, as a .deb, an .rpm, an AppImage or a tarball. It does what the Windows app does: notifications with replies, messages and calls, the clipboard, files, your phone's storage in the file manager, photos, media controls, mirroring and phone apps in windows, your PC's screen on the phone, the phone as webcam and microphone, and the phone as touchpad and keyboard. It works on GNOME and KDE, on Wayland and X11, and updates itself. A few features need a package or a permission first; the Connection Doctor says which. Thanks to Jochen Kirstätter for the port (#34, #38, #41, #42, #43, #44).
  • One command installs NectarLink on Linux with everything it needs, showing each step: curl -fsSL https://github.com/thtbee/nectarlink/releases/latest/download/install.sh | sh. It picks the package for your system, checks it against the release's sums, installs it with its dependencies, and sets up the phone as webcam, the phone as keyboard and mouse, and the firewall for your local network. --uninstall removes it all again.
  • The PC app on macOS, as a preview. It builds and runs on macOS 14 and later with pairing, files and folders, the photos browser, Continuity Camera, calls and SMS, the phone's toggles and volume, clipboard text both ways (items password managers mark private are never sent), photos copied on the phone, and notifications. Screen mirroring, recordings, PC audio, phone storage and the virtual camera aren't there yet, and phones show them as unavailable. Thanks to saivinay1805 (#24).
  • Play on phone. A switch on Home, under Phone as speaker (and a button on the PC's media card), moves what plays on the PC to your phone. The switch waits, greyed out, until a video plays. Streaming services that protect their video (Netflix, Prime Video, JioHotstar, Disney+ and others) open in their app on the phone and the PC pauses. Anything else streams from the PC as it plays, picture and sound, so your browser's ad blocker still works on YouTube: the phone shows just the video, even with other windows over it on the PC, in Chrome, Edge, Firefox, Zen and other browsers. A video file playing in VLC, Media Player or another desktop player plays on the phone itself, read from the PC at its full quality, from where the PC was; the PC pauses. Tap the notification on the phone to watch. The PC mutes its speakers while you watch and turns them back on after (Settings › Camera & Audio to keep them on). Scripts can do the same through the local API (POST /v1/play-on-phone).
  • Phone as microphone. In Settings › Camera & Audio, Start asks your phone for its microphone; tap Start there and the PC plays it into an output of your choice. With a virtual audio cable such as VB-CABLE installed, NectarLink plays into it by itself, and its other end is a microphone Discord, Zoom, OBS or Teams can pick (#7). A microphone of NectarLink's own, without the cable, needs an audio driver and comes later. A volume slider sets how loud it plays, and the phone evens out a quiet voice where it can. The request also shows on the phone's Home, with Start and Not now, so it's seen with notifications off; Not now tells the PC, which stops waiting, and so does a request left unanswered for two minutes. It can also be started from the phone: Use phone as microphone sits under Use phone as speaker on Home. While it's on, Home has a Stop button. Choosing another output on the PC moves the sound there right away, and Use this phone as a microphone in the phone's Settings, for each PC, turns asking off for that PC. Thanks to Jochen Kirstätter for finding the gaps.
  • Photo backup. In Settings › Files & Sync, turn on Photo backup for a phone and new photos from every album are copied into a folder on the PC (Pictures\NectarLink<phone> unless you choose another), filed by year and month, with videos if you want them. It only needs the phone's photos permission, copies one item at a time so a lost connection costs at most one file, and never deletes anything, on the PC or the phone. Backed-up items don't fill the Timeline.
  • Instant Hotspot joins the hotspot too. In Settings › Devices, choose the phone's hotspot from the Wi-Fi networks this PC has saved. When Instant Hotspot on Home turns the phone's hotspot on, the PC joins it by itself. Windows keeps the password; NectarLink never sees it.
  • Turn off the background connection. In the phone's Settings › Background & battery, or with Turn off on its notification. NectarLink then connects only while the app is open, and the notification goes away. Mirroring, file transfers, the webcam and the mic still finish before it disconnects. Thanks to Abinanthan (#22).
  • Pair a phone with a tablet (or another phone). In NectarLink's pairing screen, Pair a phone or tablet instead shows a code to scan from the other device. Once paired, each shows the other on Home with its battery, Ring, Send files and Send clipboard, and a phone's notifications show on the tablet; dismiss one there and it goes on the phone too.
  • The Windows app follows the system language, and speaks Simplified Chinese, by @zzz1465720680 (#16, #17), or the language you pick in Settings › General. Its messages, errors and the Features guide are translated too, with the timeline's wording from @zzz1465720680 (#18).
  • Disconnect from a device without unpairing it. Disconnect on Home (Stop reconnecting while it isn't connected) keeps a phone or PC disconnected, even after a restart, until you tap Reconnect (#48).
  • The phone's volume buttons control your PC while it plays music or video, in 4% steps, as with KDE Connect. When the phone plays something itself, or the PC is paused, they work on the phone as usual. Turn it off in the phone's Settings › Control your PC.

Changed

  • Windows 10 looks right. The window no longer shows Windows 10's own title bar over NectarLink's, Snap and resizing work, and the caption buttons show. Phone as webcam still needs Windows 11. Thanks to @waytoo-average (#103).
  • Send to your phone from more Linux file managers. Right-click files or folders in Nemo (Cinnamon) or Thunar (XFCE) as well as GNOME Files, Dolphin and Caja, and folders now work in all of them (#49).
  • Setup on Windows asks about the desktop shortcut and the folder. Untick Add a desktop shortcut to skip it. Updates leave it as you had it, so one you deleted no longer comes back. Change next to Installs in puts NectarLink on another drive or folder instead of Program Files, and updates go there too. Setup locks the folder like Program Files. If a folder above it can be changed without administrator rights, updates there ask for your permission each time (#102).
  • Files received on Windows are marked as from another device, the way a browser marks a download, so Windows checks a program with SmartScreen before it runs and Office opens documents in Protected View.
  • Pause for banking apps uses less battery. While the screen is off, the phone checks the app in front every 15 seconds instead of several times a second, and checks again as soon as the screen turns on. By @alexfoxtm (#61).
  • The phone app starts about twice as fast right after an update. Android compiles an app installed outside the Play Store only during idle maintenance, often days later. With Elevated set up, NectarLink asks for that compile a couple of minutes after each update.
  • Mirroring and control from the PC use less CPU. Each mirrored frame takes about 14% less work to draw, and permission checks for every touch and message are read from memory instead of the database.
  • 4K for Phone as webcam shows on the PC only when the phone can stream it. The PC offered 4K for every phone and camera; picked for one that can't, the stream stayed at 1080p and the choice moved back. The phone now says what the camera in use can do, and the PC's choices follow it, also when you switch cameras.
  • The phone's apps show at once. The list of apps to open in windows was fetched with every icon each time it opened. The PC now keeps the last list, also for the next start, and refreshes it in the background; the phone keeps the icons it already drew.
  • The PC's window opens where you left it. It comes back on the same monitor, at the same size and place, and maximized if it was. If that monitor is gone or smaller, it fits the window on screen. Thanks to Jochen Kirstätter (#26).

Fixed

  • The build docs registered the virtual camera with regsvr32, which can't work. They now use the app's --register-vcam, and say why a debug build's camera fails to start. Thanks to @Parth412100 (#117).
  • Add folder in Synced folders only ever added DCIM to Pictures. It now asks which folder on the phone (with shortcuts for Camera, Screenshots, Download and others), where it goes on the PC, and whether to sync one way or both ways. Sync now also says when the phone hasn't let the PC into its files, instead of "Folders are up to date" (#111).
  • Screen readers couldn't open a step of the first-run walkthrough from its step dots on the PC. Pressing one now goes to that step.
  • Typing on the phone from the PC with a non-US keyboard. Characters typed with AltGr (@ and € on a French or German keyboard, say) were dropped in the mirror window and in Type on phone. Ctrl+C, Ctrl+X and Ctrl+A now copy, cut and select all on the phone, too; what you copy there reaches the PC with the clipboard (#107).
  • A big phone folder showed only part of its files in File Explorer (a camera folder of thousands of photos, say). Folders now come in pages, so every file shows, and listing one no longer holds up the connection.
  • A transfer too big for the receiving drive started anyway and failed partway. The receiver now checks the space first and the sender says there isn't enough.
  • The phone's keyboard didn't open after typing from the PC. With Elevated, the PC's keys reach the phone through a virtual keyboard that stayed connected, so Android hid the on-screen keyboard in every app. It now goes away 10 seconds after the last key from the PC (#93).
  • Renaming the phone reached the PC only after the app restarted. It now shows on the PC right away (#87).
  • The phone's folder in File Explorer said the network was unavailable when the phone had turned it away. It now says access is denied, and a notification on the PC says what to turn on (#88).
  • The phone rang twice during a call while Phone as speaker was on: the PC's ringtone was played on the phone as well.
  • NectarLink never appeared in the Windows Share sheet, even with Developer Mode on, because its package didn't register. It does now, and if Windows refuses it, sparse-package.log in the install folder says why (#84).
  • The Calls page showed "PC call audio connected" on Windows, sometimes with a headset's name. Windows doesn't let apps carry a phone call's audio, so the panel is gone there; call audio stays on the phone (#86).
  • A Phone Status widget was listed for the Widgets board but never showed anything. It's removed until a working one is built (#85).
  • Find my phone could ring too quietly to hear when the alarm volume was low. It now rings at full alarm volume and puts your volume back afterwards, even if the app is closed mid-ring. Do Not Disturb still decides whether it sounds. By @alexfoxtm (#56, #58).
  • Call controls on the PC went to the wrong call when a second call came in during one: hanging up or holding from the PC acted on the waiting call. They now stay on the call in progress. By @alexfoxtm (#59).
  • A resumed transfer showed as paused on the sending side until the other device answered.
  • Wake when PC is nearby never found the PC: the Windows app didn't start its Bluetooth beacon, and the phone looked for the wrong bytes in it. Both are fixed, and the Linux app broadcasts the beacon too (#47).
  • Typing on the PC from the phone lost letters when voice typing rewrote what it had typed: the PC turned away the burst of backspaces as too fast. The PC now takes typing at full speed, and the phone resends anything an older PC turns away (#52).
  • Phone as webcam never showed up in other apps. Windows couldn't start NectarLink's camera, though Settings said it was ready. It now appears as NectarLink Webcam in Zoom, Teams, OBS, the Camera app and others. Frames also stay on the graphics card on the way, and the phone sends H.265 when the PC can decode it, with H.264 otherwise. Thanks to @AS8148 (#51).
  • A file being sent from the PC showed up twice on Home, once under Waiting to send with a bar that kept flickering, and again under Transfers. Each file now has one row with one smooth bar that shows the percent, sizes, speed and time left.
  • With NectarLink in two profiles on one phone (a work profile, or a cloned app), only one of them could connect over USB, and the PC kept offering to pair the other. Each profile now connects over USB, and the phone's name says which one it is, such as "Pixel 9a (Work)" (#25).
  • Plugging the phone in while it's connected over Wi-Fi moves the connection to USB sooner, and reconnecting after the phone restarts no longer tries a stale USB address first. PC audio sent to the phone drops a moment of sound under load rather than holding up everything else. Thanks to Jochen Kirstätter (#23).
  • Copying text on the phone that also carried a link to a file sent the wrong thing to the PC, or treated it as an image. The text now comes through as text, and files that aren't images aren't sent as images. Thanks to Jochen Kirstätter (#27).
  • The Timeline showed thumbnails only for photos saved from the phone, and some of those came out empty. Images you send or receive now get one too, files without one get an icon for their type, and Copy works for them. Thanks to Jochen Kirstätter (#28).
  • Turning on LocalSend closed the Windows app.
  • Play on phone froze on the phone when the player's window was minimized, and showed the whole screen when it couldn't find the window. A minimized player now goes back behind your other windows and keeps playing on the phone; a window it can't find stops Play on phone instead of showing your screen.
  • Browsing the PC's files from the phone showed nothing. It works with Your PC in your pocket on, and says what to do when it can't list a folder.
  • Samsung's Camera, and other apps that check their screen's shape, crashed in an app window. App windows now always have a common screen shape.
  • With several app windows open, the phone could drop its connection to the PC for a moment and every window had to start again. Messages that keep the connection alive now go ahead of the video.
  • The "sharing your screen" bar had no background.
  • The PC's log filled with network adapter warnings and kept only a few hours.
  • From an audit by @kunal4060 (#72 to #79):
    • Text typed in one conversation could be sent in another: the message box kept it when you switched. Each conversation now keeps its own draft.
    • LocalSend uploads now have to be the size you accepted, and a peer's certificate has to match its fingerprint.
    • On Windows, a phone file named like C:notes.txt could be saved outside its folder by folder sync or Continuity Camera.
    • Phone as speaker now needs the phone's Media permission, and the PC's sound waits for the phone that asked instead of moving to another one.
    • A paired device can no longer take over another device's pairing by reporting its install ID.
    • Deleting a folder sync or automation rule could delete another rule too.
    • Two phones with the same name shared one folder in File Explorer; turning one off deleted the other's. A phone's name with letters like "İ" could crash the app there.
    • Renaming a file on the phone or PC from the other device no longer replaces a file that already has that name, and the trash keeps both files of the same name.
    • Silencing a call from the PC could leave the phone's ringer muted if the app was stopped mid-call. Keypad tones sent from the PC were too short to register.
    • Elevated could start again after the background connection was turned off.
    • Reinstalling from the Linux tarball could overwrite the app with its launcher script, and Linux updates now only use the same kind of package as the one installed.
    • Updates are only downloaded from this project's GitHub releases.
    • Settings and the local API token are readable only by you on Linux and macOS.
    • Smaller fixes: device names are cleaned and capped, SVGs are no longer opened on arrival, notification history and phone artwork are capped, chat history isn't cleared by a message stamped in the future, a busy database no longer cancels a queued send, the Shelf says when a send is only queued, and Find my phone on the PC shows ringing for the whole minute.

0.1.4 (2026-10-17)

Steadier connections, Pause for banking apps, Simplified Chinese on Android, and the fixes for what people ran into in the first days after launch.

Downloads

Download For Needs
Nectarlink-0.1.4-x64-setup.exe Windows Windows 11, 64-bit (Windows 10 works, without Phone as webcam)
Nectarlink-0.1.4-android.apk Android Android 8.0 or newer

Both are listed with their SHA-256 hashes in SHA256SUMS.txt. Installed copies update themselves.

New

  • Pause for banking apps. Many banking apps won't open while Developer options, debugging or an accessibility service is on. Choose them in Settings › Control from your PC: while one is open, NectarLink turns those off, and turns back on exactly what was on when you leave, even after a crash or a restart. A shortcut can pause first for apps that check as they open.
  • Simplified Chinese for the Android app, by @zzz1465720680 (#13). It follows the phone's language.
  • Turn the phone's screen off from an app window, as screen mirroring could: the phone stays awake with its screen dark, and the apps keep running on the PC. Keep phone awake works there too.
  • Root as a way to set up Elevated. On a rooted phone (Magisk, KernelSU or APatch), Use root in Elevated setup starts it without pairing Wireless debugging, and it comes back by itself after a restart or away from Wi-Fi. It runs with the same permissions as through Wireless debugging.
  • Installing past Google Play Protect. The install guide and troubleshooting explain what to do when Play Protect blocks the APK with no Install anyway button, as it now does in India and many other countries, by @eren-998 (#11). The README points there from the downloads.

Changed

  • Root is only used when you choose it. On a rooted phone, NectarLink asked for root every time it started and ran its Elevated helper as root. Now nothing asks for root unless you pick Use root, and the helper runs as the shell user either way.
  • The apps say "PC" instead of "Windows PC".

Fixed

  • Far fewer disconnects. As the phone app opened, two of its startup calls could race and start the phone's connection twice, with one identity. The two took the PC from each other every few seconds: windows and mirroring dropped or couldn't start, and the PC showed the phone connecting over and over. It now starts once.
  • Windows 10. NectarLink and its installer start on Windows 10. They failed right away with "Entry Point Not Found" because the Windows 11-only virtual camera was required at startup. On Windows 10, everything works except Phone as webcam, which needs Windows 11.
  • Phone sound never falls back to the microphone. On a phone that blocks capturing what it plays, Elevated recorded the microphone instead and sent it to the PC as the phone's sound. It now sends no sound.
  • Mirroring with Elevated starts without asking on the phone. Starting it failed on the phone (it opened the helper's stream on the main thread, which Android refuses), so it fell back to asking you to share the screen.
  • Screen mirroring and app windows use the GPU. They decode on the PC's GPU when it has one, and in software when it doesn't or if the GPU fails mid-stream, and convert pictures on several cores. Large phone screens and several app windows stay smooth with less CPU.
  • App windows and mirroring stay up.
    • With an app open in a window on the PC, the phone went to sleep after its screen timeout, which stopped the app and froze the window. While a window is open, the phone now stays awake with its screen dimmed, and sleeps as usual once the last window closes.
    • While it streams, the phone keeps its Wi-Fi and processor awake, so it stays on the network with its screen off.
    • If the connection to the PC dropped or was replaced just as you opened an app window or the phone's screen, the phone gave up at once with "Offline". It now waits up to 10 seconds for the connection to come back.
  • Phone as webcam in 4K is smooth. The PC decoded and converted each 4K frame in about 47 ms, over the 33 ms a frame has at 30 fps, so frames were dropped. It now decodes on the GPU when there is one and converts on several cores, about 19 ms a frame (#6).
  • Webcam resolution. The resolution buttons on the PC and the phone follow what's actually streaming, whichever side changed it; held upright, the phone's showed none selected. 4K is offered only when the camera in use can output it, so switching to a front camera without 4K drops to 1080p.
  • Typing and pasting into the phone's screen and app windows.
    • The emoji panel (Win+.) and input methods for Chinese and other languages work while you control the phone. Only plain key presses got through before.
    • Win+V pastes. Windows marks an item picked from clipboard history as one for clipboard watchers to skip, and NectarLink skipped it even when you asked to paste it.
    • Pasting is instant instead of typing out a letter at a time, and a pasted line break no longer presses Enter, which sent chat messages early.
  • Typing on the PC from the phone works like a normal keyboard. In Control PC, Backspace deletes, the symbols page stays open for more than one symbol, autocorrect and suggestions work, and letters no longer come out jumbled.
  • No "copied" pop-up on the phone for copies made on the PC. With Elevated on, text from the PC goes on the phone's clipboard without the copy toast or preview Android and One UI show for every copy. Without Elevated, Android doesn't let an app avoid it.
  • Calls show who is calling. An answered call lost the contact name on the PC, and calls made on the phone showed "Unknown caller". The name now stays for the whole call, the number comes from Android's call service when its broadcast has none, and a number not in contacts shows as the number.
  • Old calls and notifications no longer come back after the PC sleeps or restarts. A call whose end the phone never recorded rang again on every reconnect; it now counts as over after 90 seconds of ringing. Notifications you clear on the PC stay cleared when the phone resends its list (on reconnect or Refresh), even when the phone can't remove them, as with missed calls and alarms. A new post from the same app shows as usual.
  • Android: the app no longer crashes when you turn off notification access or force stop it, or when Phone as webcam's preview comes back (the same fix covers the QR scanner and Continuity Camera).
  • Android: changing the theme in Settings no longer jumps back to Home (#8).
  • Android: on Hive, the category chips at the top of Settings and the Home/Settings bar are solid, so the honeycomb and the list no longer show through them.
  • Windows: button tooltips, such as Pause on the media card, show next to their button again instead of in the window's top-left corner.
  • Pausing a transfer on the receiving device just as its last bytes arrived left the sending device waiting, showing it as still sending. Both now show it paused.

Thanks

To @zzz1465720680 for the Simplified Chinese translation and the reports in #6 and #8, @eren-998 for the Play Protect guide, @jochenkirstaetter for testing on a Pixel and the Linux port in progress, and everyone who reported problems on GitHub and X.

0.1.3 (2026-10-15)

Hive, a new theme for both apps, and updates to the Windows app that work on slow or unsteady connections and show how far they are.

Downloads

Download For Needs
Nectarlink-0.1.3-x64-setup.exe Windows Windows 11, 64-bit
Nectarlink-0.1.3-android.apk Android Android 8.0 or newer

Both are listed with their SHA-256 hashes in SHA256SUMS.txt. Installed copies update themselves. If Update in 0.1.2 or earlier closes NectarLink and nothing happens, install this version from the link above once; updates after it work from the app.

New

  • Hive, a theme for the Windows and Android apps: honey on charcoal in dark mode and on warm wax in light mode, with a living honeycomb behind the whole app. The comb grows from the logo, breathes slowly, and sends a soft pulse of light outward every few seconds, the same on the PC and the phone. On the PC the phone on Home shows it too. Its colors are fixed, so the wallpaper, artwork and phone color options are hidden while it's on.
    • Choose it in Settings › Appearance, or from the Try Hive card on Home. Dismissed, the card returns only after an update or a reinstall.
    • Animated comb (on by default) turns the motion off. The comb also holds still with reduced motion or battery saver on, and while the app isn't in front.
    • Light on resources: one GPU shader draws the comb, updated about 30 times a second and only while the window is in front. On Android 12 and older, a still comb breathes.
  • The installer and uninstaller share Hive's comb.

Fixed

  • Updating the Windows app. Clicking Update closed NectarLink right away, and the download that followed in the background could time out on a slow connection to GitHub's download server. The update then failed with no sign of it, and NectarLink reopened only minutes later. Now NectarLink stays open while it downloads, shows the progress in Settings › Connection & About, resumes a download that was cut off, and closes only once the update is downloaded and checked. If an update doesn't install, NectarLink reopens and says so.
  • Slow responses from GitHub no longer fail update checks or downloads: the Windows app waits longer and tries again.
  • Album art no longer goes blank on the Windows app's Home media card after the track changes or the card switches between the phone and this PC. The same fix covers rounded images in notifications, calls, messages and the shelf.
  • Elevated on Android reconnects by itself after Wi-Fi drops or changes. It used to stay on Try again until tapped, even with Wireless debugging back on. Now it starts again as soon as Wireless debugging is on, and keeps trying while the phone is on Wi-Fi.

0.1.2 (2026-10-15)

A smoother update on both devices, and the phone reconnects on its own after an update or a restart.

Downloads

Download For Needs
Nectarlink-0.1.2-x64-setup.exe Windows Windows 11, 64-bit
Nectarlink-0.1.2-android.apk Android Android 8.0 or newer

Both are listed with their SHA-256 hashes in SHA256SUMS.txt. Installed copies update themselves.

Fixed

  • The phone reconnects after an update or a restart. Android closes an app while it updates, and nothing brought NectarLink's connection back until the app was opened again, so the PC showed the phone as gone. The connection now comes back on its own, after an update and after the phone restarts. A notification says the update is done; tapping it opens the app.
  • Check for updates in the phone's Settings shows what it found: that NectarLink is up to date, or the update with its Update button and progress, or why it couldn't check. Before, the button greyed out and nothing appeared.
  • Allowing installs continues the update. When Android first asks to let NectarLink install updates, coming back from that screen now carries on with the update instead of staying on Allow.
  • Phone downloads resume. A dropped or changed connection no longer fails the update: the download waits for the network and continues where it stopped, also after the app restarts. Progress shows the size downloaded.
  • Updates keep going in the background. Leaving the screen no longer stops a phone update that's downloading. Saying no to Android's install prompt leaves the update ready to install instead of reporting an error.
  • The PC app comes to the front after updating. It reopened behind other windows; now it comes forward and a notification says it's updated. The same fix brings the window forward when NectarLink is opened while already running.

0.1.1 (2026-10-15)

Fewer steps when sharing from the phone, clearer setup on phones that hold back permissions, and Graphite as the phone's default look.

Downloads

Download For Needs
Nectarlink-0.1.1-x64-setup.exe Windows Windows 11, 64-bit
Nectarlink-0.1.1-android.apk Android Android 8.0 or newer

Both are listed with their SHA-256 hashes in SHA256SUMS.txt. Installed copies update themselves.

Changed

  • Sharing from the phone sends right away. Choosing NectarLink in the Android share sheet starts the transfer immediately, with no Flick to send card or Undo countdown. With more than one PC connected, you pick one first. Progress shows in a notification with a Cancel button, followed by a Sent to confirmation that clears itself.
  • Files shared from the phone no longer open on the PC by themselves. A shared photo or document is saved to Downloads\Nectarlink and announced in a notification. To have it open in its default app as it arrives, turn on Settings › Files & Sync › Open files shared from the phone (off by default).
  • Graphite is the phone app's default theme, in light or dark to match the phone. Bloom and Glass remain in Settings › Appearance, and a theme you already picked stays as it is. The Windows app is unchanged.

Fixed

  • Restricted settings during phone setup. On Android 13 and newer, an app installed from a file can't get notification access or the accessibility service, and on Android 15 and newer the SMS permission, until the user allows restricted settings. When that happens, setup now explains it and offers Open app info: tap ⋮, then Allow restricted settings, and come back to grant.
  • Manage buttons in phone setup. For a permission that's already granted, Manage now opens the screen where it can be changed: notification access, App info, All files access or Accessibility. Before, it did nothing.
  • Release notes on GitHub keep their paragraphs instead of breaking at every line of the changelog.

0.1.0 "Pollen" (2026-10-14)

The first public release of NectarLink: the Windows app, the Android app and the nectarlink command-line client. NectarLink connects an Android phone and a Windows 11 PC directly over your network or a USB cable, end-to-end encrypted, with no account and no cloud service.

Downloads

Download For Needs
Nectarlink-0.1.0-x64-setup.exe Windows Windows 11, 64-bit
Nectarlink-0.1.0-android.apk Android Android 8.0 or newer

Both are listed with their SHA-256 hashes in SHA256SUMS.txt.

The Android app is signed with the project's release key. The Windows installer isn't code-signed yet, so SmartScreen asks once: choose More info, then Run anyway.

Setup and pairing

  • Installer. A setup window of its own, light or dark to match Windows. One click installs, with one administrator prompt. Setup adds the Windows Firewall rule for local connections, Start menu and desktop shortcuts, Send to in File Explorer and the update task, and starts NectarLink with Windows. What this installs on the first screen lists all of it. The last screen shows a QR code that opens the Android app's download page.
  • Uninstaller. Removes everything setup added, along with the app's settings and pairings on the PC. Files you received and voice recordings stay where they were saved.
  • First-run walkthrough in both apps: a privacy summary, installing the phone app, pairing, choosing what to share, and an optional PC check (notifications, Start with Windows, firewall). It resumes where you left off and can be reopened from Settings.
  • Features Guide in both apps: every feature, whether it works with your paired phone right now, what would enable it, and a Show me button that goes to its control.
  • Pairing by QR code (from the NectarLink app or any camera app), by picking a nearby device and comparing a 6-digit code, or automatically over a USB cable. Pairing links opened from other apps ask before pairing.
  • Power levels on Android:
    • Standard: ordinary Android permissions.
    • Assist: adds the accessibility service, so the PC's mouse and keyboard can tap, swipe and type on the phone.
    • Elevated: a one-time Wireless debugging setup, no root. Adds real touch and key input, phone apps in their own windows, background clipboard sync, one-time codes on Android 15 and newer, Wi-Fi and Bluetooth switches, and in-call mute, hold and speaker.
  • Connection Doctor in both apps: checks the firewall rule, the network profile, VPN routing, Wi-Fi client isolation and Android battery restrictions, and fixes what it can.

Notifications

  • The phone's notifications on the PC, as Windows popups and in a live feed on Home, grouped by app and conversation.
  • Inline replies and notification actions from the PC.
  • Dismissed on one device, dismissed on the other.
  • Live Updates: progress bars, timers, deliveries and rides, kept current.
  • One-time codes are detected and get a Copy code button. They are never kept in clipboard history.
  • Pictures attached to notifications, such as photos in chat messages.
  • Dismissed notification history, per-app mute rules and notification profiles.
  • Optional: the PC's own notifications forwarded to the phone.

Messages

  • SMS and MMS conversations on the PC: read, reply, send pictures and start new conversations, with contact search.
  • Chats from RCS, WhatsApp, Telegram, Signal and other messaging apps in the same inbox, answered through each app's own reply.
  • Open conversations update as new texts arrive.

Calls

  • An incoming call banner on the PC with caller ID: answer, decline, or decline with a text message.
  • Hang up from the PC. With Elevated: mute, hold, speakerphone and the keypad.
  • Call any number or contact through the phone from the PC dialer.
  • Recent calls and contacts.
  • Call audio stays on the phone (see Known limitations).

Clipboard

  • Copy on one device and paste on the other: plain text, formatted text, images and copied files.
  • On the phone: the Send clipboard Quick Settings tile, the share sheet and the home-screen widget. With Elevated, copies on the phone reach the PC in the background.
  • Context chips on the PC for what was copied, such as Open for a link.
  • Optional history of the last 50 items, encrypted on disk.
  • Passwords from password managers are never sent, and anything Android marks as sensitive stays on the phone.

Files and photos

  • Files and folders in both directions at Wi-Fi speed. Transfers can be paused, resume after a dropped connection, and are verified with BLAKE3.
  • Send to in File Explorer, drag and drop, and the share sheet on the phone.
  • Waiting to send: files, clipboard items, links and alerts sent while the other device is offline are delivered in order when it reconnects.
  • The phone's storage in File Explorer, and the PC's files from the phone.
  • Folder sync between the phone and the PC.
  • LocalSend compatibility, to send to and receive from LocalSend devices.
  • Photos: the phone's camera roll, screenshots and albums on the PC, with full-resolution viewing, saving several at once, dragging into other apps, and alerts for new photos and screenshots.

Screen mirroring and app windows

  • The phone's screen in a window on the PC at up to 60 frames per second (H.264, H.265 or AV1, hardware decoded), with the phone's sound.
  • Control it with the PC's mouse and keyboard (Assist or Elevated).
  • Screenshots and MP4 recordings; keep the phone awake, or turn its screen off while mirroring.
  • Apps: open any phone app in a window of its own on the PC, with its own taskbar icon, running beside whatever the phone shows (Elevated, Android 11 and newer).
  • Desktop mode (Samsung DeX and Android desktop mode) in a PC window.
  • The PC's screen on the phone.

Your PC from the phone

  • Touchpad, air mouse, keyboard with a modifier bar, voice typing, and a presentation remote with a laser pointer.
  • Deck: a grid of buttons for the PC (media, shortcuts, apps, commands and OBS Studio), with live volume and mute.
  • Lock, sleep and wake the PC, including Wake-on-LAN.
  • Desk clock: a stand display for the phone on a charger or desk stand, with the time, the PC's media and quick actions.

Camera and sound

  • Phone as a webcam through the NectarLink Webcam virtual camera, in Zoom, Teams, Meet, OBS and the Camera app, at up to 4K where the phone supports it, with lens and zoom controls.
  • Continuity Camera: take a photo or scan a document with the phone, with corner cropping and a black-and-white mode, and have it on the PC's clipboard.
  • Phone as a speaker for the PC's sound.
  • Voice recorder: record on the phone with timestamped markers and save to the PC as M4A, MP3, WAV or FLAC.

Across both devices

  • Handoff: links, map locations, videos at the same timestamp, and documents open on the other device.
  • Media controls in both directions.
  • Type on phone: type into the phone with the PC's keyboard, without mirroring.
  • Phone controls on PC Home: Do Not Disturb, ringer, volume, flashlight, brightness, Wi-Fi and Bluetooth.
  • Battery levels and low-battery alerts, and Find my device to ring the phone.
  • Timeline: a searchable history of everything that moved between your devices.

On the PC

  • Three themes, Bloom, Glass and Graphite, each in light and dark. The accent color can follow the desktop wallpaper, the album art of what's playing, or the paired phone's colors, or be one of five presets.
  • Command Palette (Ctrl+Alt+Space) for every action, from any app.
  • Shelf (Ctrl+Alt+S): a slide-out panel with the phone's latest photo, screenshot, clipboard item and recent files, plus Flick to send.
  • Nectar Island: an optional pill at the top of the screen for calls, transfers, media, timers and alerts.
  • The system tray and a taskbar Jump List.
  • Automations: trigger-action rules, and nectarlink notify-when for an alert on the phone when a long task finishes.
  • An opt-in local HTTP API on 127.0.0.1 with a bearer token, and a PowerToys Command Palette extension.
  • Keyboard navigation and screen reader labels throughout.

On the phone

  • Material You colors from the wallpaper, in light and dark.
  • A home-screen widget and a Quick Settings tile.
  • A foreground service keeps the connection, with battery settings explained per manufacturer.

Command-line client

nectarlink pairs (pair, join, nearby), lists and unpairs devices, shows what works with a device (caps) and what it may do (toggle, toggles), sends files and clipboard content, rings a device, controls media, acts on notifications, and can stand in for a phone (--as-phone) for testing. It builds on Windows and Linux.

Privacy and security

  • Local-first: devices connect directly over the local network or USB. Nothing passes through a NectarLink server, and there is no account.
  • Every connection is QUIC with TLS 1.3, authenticated with Ed25519 device keys exchanged at pairing. Keys are protected by Windows DPAPI and the Android Keystore.
  • Each paired device has its own feature switches. Remote control of the PC, shell commands and access to the phone's storage are off until you allow them.
  • Connect over mobile data (off by default) keeps paired devices connected across networks through relays that carry only encrypted traffic.
  • The only other internet traffic is the update check against GitHub Releases, which can be turned off.

Updates

  • Both apps check GitHub Releases once a day and verify every download against SHA256SUMS.txt. The Android app also refuses an APK not signed with its own key.
  • Install updates automatically is on by default. On Windows, updates install through a system task once nobody has used the PC for 10 minutes and nothing is in progress, with no administrator prompt. Both settings can be turned off.

Known limitations

  • Call audio stays on the phone: Android doesn't let apps capture cellular call audio, and Windows reserves its Bluetooth hands-free API for its own apps.
  • Without Elevated, Android doesn't let apps read the clipboard in the background. Use the Quick Settings tile, the share sheet or the widget.
  • Chats from messaging apps show messages that arrive while connected. Older history and new chats need the app itself, for example in an app window.
  • Apps that protect their screens, such as banking and streaming apps, show black when mirrored.
  • The Windows Share sheet and the Widgets board need package identity from a signed installer. Send to in File Explorer and the Shelf work on every install.
  • Wake-on-LAN from shutdown usually needs a wired connection.
  • Windows adds its own copy button to some code notifications, so a popup can show two.

See Known limitations for the details.