Skip to content

armgit / nota

Public Imported from GitHub
0

Nota — a free DAW for macOS, Windows and Linux. No subscription, no account — just open it and make music.

2.8 KB
Raw Blame

Quickstart: validating the Cue output

Contracts: c-abi.md, ui.md. Model: data-model.md.

Automated (smoke test, scripts/build.sh)

New cases in tests/Nota.SmokeTest/CueOutputTests.cs, all through nota_engine_render_device_block_cue with a deterministic WAV clip (see memory: synth notes drift between renders — use a clip, not a synth):

Case Setup Expect
Tap is pre-fader clip track, Cue on, fader −∞ Cue ≈ clip level; Main silent
Tap is pre-mute / solo Cue on, track muted; another track soloed Cue still carries the track; Main has none of it
Tap is post-devices Utility/gain device +6 dB on the track Cue +6 dB vs dry
Sends/master excluded send to a return, master gain device Cue unaffected
Several cued two clip tracks cued Cue = sum
Group cued group with a gain device, group muted Cue = group bus after device
Cue level null test (SC-001) sweep Cue level 0 → 2 Main bit-identical to Cue off
Click → Cue (SC-002) metronome on, count-in 1 bar, dest Cue Main identical to metronome off; Cue has clicks
Click → Main unchanged dest Main Main identical to the pre-feature render
Alignment (SC-003) dest Main + Cue, impulse clip cued impulse on the same sample in Main and Cue
Scatter nota_audio_scatter_test 4 ch, Main 0/2 Cue 2/2 ch 0/1 = Main, 2/3 = Cue
Scatter fallback (SC-004) same routing, 2 device channels ch 0/1 = Main only; state = 2
Main fallback Main 2/2, 2 device channels Main on 0/1; state = 1
Overlap after fallback Main 2/2, Cue 0/2, 2 channels Main on 0/1, Cue silent; state = 3
Project round-trip (SC-006) save with 2 cued tracks, Cue level 0.5 reload restores both
v31 project open a fixture saved before no Cue, renders identically

Manual (hardware)

Prerequisite: an interface with ≥ 4 outputs (or macOS BlackHole 16ch / an aggregate device; Windows ASIO4ALL or the interface's ASIO driver).

  1. Settings → Outputs: Main 1/2, Cue 3/4, Click → Cue. Close.
  2. Load a project with a drum loop and a vocal clip. Cue the vocal track, mute it. Play: speakers (1/2) — drums, no vocal, no click; headphones (3/4) — vocal + click.
  3. Move the Cue fader end to end: speakers don't change.
  4. Arm a track with input monitoring, cue it, record: the take has no click and no Cue level change in it.
  5. MIDI Learn: map a pad to the vocal's Cue and a knob to Cue level; both work.
  6. Unplug the interface (macOS falls back to built-in output): the Cue strip shows unavailable, the speakers never play the vocal or the click. Plug back in → Cue returns.
  7. Save, quit, reopen: cued tracks and Cue level back; Outputs page unchanged.
  8. Windows: repeat 1–3 on WASAPI and on ASIO; Linux: 1–3 on a multi-channel ALSA/Pulse device.