The ultimate harness for coding agents and beyond. All your agents. All your machines. One command center. Start with code, then follow your curiosity and build across disciplines: CAD, circuits, robots, games and music.
TypeScript 3d-modelingagent-frameworkagent-harnessai-agentscadclaude-codecodexcoding-agentsdeveloper-toolsesp32game-developmentmcp-servermulti-agentopen-hardwareopencodeopenharnesspcbroboticsterminaltmux
#!/usr/bin/env bash
# Flash the Harness Pro (ESP32-P4 rev v3.2, MAC e8:f6:0a:e7:63:7d) over its USB port.
#
# scripts/flash.sh [--build-dir DIR] (default: build)
#
# The daemon holds the port, so it is stopped for the flash and started again afterwards, and the flasher
# flag tells it the port is busy on purpose. The chip and MAC are checked first: a different unit or
# silicon revision gets exit status 2 and nothing is written.
set -u
BUILD_DIR=build
while [ $# -gt 0 ]; do
case "$1" in
--build-dir) BUILD_DIR="${2:?--build-dir needs a directory}"; shift 2 ;;
*) echo "usage: $0 [--build-dir DIR]" >&2; exit 64 ;;
esac
done
PORT=${FLASH_PORT:-/dev/cu.usbmodem21101} # another unit: FLASH_PORT=/dev/cu.usbmodemXXXX scripts/flash.sh
ESPTOOL="$HOME/.harness/flasher/esptool-v5.3.1-macos-amd64/esptool-macos-amd64/esptool"
FLAG="$HOME/.harness/flasher/flashing"
WANT_CHIP="ESP32-P4 (revision v3.2)"
WANT_MACS="e8:f6:0a:e7:63:7d e8:f6:0a:e7:64:61 e8:f6:0a:e7:64:86" # the known units; a new one is added here after its chip-id is read
cd "$(dirname "$0")/.." || exit 1
APP=$(ls "$BUILD_DIR"/harness_pro.bin 2>/dev/null | head -n 1)
for f in "$BUILD_DIR/bootloader/bootloader.bin" "$BUILD_DIR/partition_table/partition-table.bin" \
"$BUILD_DIR/ota_data_initial.bin" "$APP"; do
if [ -z "$f" ] || [ ! -f "$f" ]; then
echo "missing build output: ${f:-$BUILD_DIR/harness_pro.bin} (build first)" >&2
exit 1
fi
done
mkdir -p "$(dirname "$FLAG")"
date +%s > "$FLAG"
status=0
finish() {
rm -f "$FLAG"
harness start
exit "$status"
}
harness stop
info=$("$ESPTOOL" --port "$PORT" chip-id 2>&1)
echo "$info"
mac=$(printf '%s\n' "$info" | tr '[:upper:]' '[:lower:]' | grep -o 'mac: *[0-9a-f:]*' | head -n 1 | sed 's/mac: *//')
if ! printf '%s\n' "$info" | grep -qF "$WANT_CHIP" || ! printf ' %s ' "$WANT_MACS" | grep -qF " ${mac:-none} "; then
echo "refusing to flash: expected $WANT_CHIP with a MAC in [$WANT_MACS], got MAC '${mac:-none}'" >&2
status=2
finish
fi
"$ESPTOOL" --chip esp32p4 --port "$PORT" -b 921600 write-flash \
--flash-mode dio --flash-freq 80m --flash-size 16MB \
0x2000 "$BUILD_DIR/bootloader/bootloader.bin" \
0x8000 "$BUILD_DIR/partition_table/partition-table.bin" \
0xf000 "$BUILD_DIR/ota_data_initial.bin" \
0x20000 "$APP"
status=$?
finish