The ultimate harness for coding agents and beyond. All your agents. All your machines. One command center. Start with code, then follow your curiosity and build across disciplines: CAD, circuits, robots, games and music.
TypeScript 3d-modelingagent-frameworkagent-harnessai-agentscadclaude-codecodexcoding-agentsdeveloper-toolsesp32game-developmentmcp-servermulti-agentopen-hardwareopencodeopenharnesspcbroboticsterminaltmux
Prepare Harness OS 0.1.1, the first official release
bubu-dudu1c9e2326d7af
diff --git a/os/INSTALL.md b/os/INSTALL.mdindex baac0e9b9..86f827403 100644--- a/os/INSTALL.md+++ b/os/INSTALL.md@@ -1,6 +1,6 @@# Install Harness on a ThinkPad-These instructions are for **0.1.0-preview.14**, using a Mac to prepare the USB.+These instructions are for **0.1.1**, using a Mac to prepare the USB.The USB opens the installer directly. Installation begins only when you choose **Install Harness**in the installer; it erases the entire selected disk.@@ -21,20 +21,20 @@ compute still need testing on the actual hardware.## 2. Download and verify on the Mac-From the [preview 14 release](https://github.com/autonomous-ai/openharness/releases/tag/os-v0.1.0-preview.14),+From the [0.1.1 release](https://github.com/autonomous-ai/openharness/releases/tag/os-v0.1.1),download both files into the same folder:-- `harness-0.1.0-preview.14-x86_64.iso`-- `harness-0.1.0-preview.14-x86_64.iso.sha256`+- `harness-0.1.1-x86_64.iso`+- `harness-0.1.1-x86_64.iso.sha256`If they are in Downloads, open Terminal and run:```shcd ~/Downloads-shasum -a 256 -c harness-0.1.0-preview.14-x86_64.iso.sha256+shasum -a 256 -c harness-0.1.1-x86_64.iso.sha256```-The result must say `harness-0.1.0-preview.14-x86_64.iso: OK`.+The result must say `harness-0.1.1-x86_64.iso: OK`.If it does not, download the files again before flashing.## 3. Flash the USBdiff --git a/os/README.md b/os/README.mdindex e7bb53408..4d518881d 100644--- a/os/README.md+++ b/os/README.md@@ -11,7 +11,7 @@ audience, not its name.Product names and interface copy follow the [Naming System](../docs/naming-system.md).-**Preview 14:** the USB opens the installer directly. Installation works offline.+**Harness 0.1.1:** the USB opens the installer directly. Installation works offline.After shutdown, remove the USB and boot the installed disk. If disconnected,the Wi-Fi page opens first and advances automatically when connected; Ethernetskips that step. OpenCode starts on the left with two real terminals on the right.diff --git a/os/lock.json b/os/lock.jsonindex 80e595706..982e84a7d 100644--- a/os/lock.json+++ b/os/lock.json@@ -1,8 +1,12 @@{- "version": "0.1.0-preview.14",+ "version": "0.1.1","arch_snapshot": "2026/10/01","architecture": "x86_64","upgrades_from": [+ {+ "version": "0.1.0-preview.14",+ "arch_snapshot": "2026/10/01"+ },{"version": "0.1.0-preview.13","arch_snapshot": "2026/10/01"