The ultimate harness for coding agents and beyond. All your agents. All your machines. One command center. Start with code, then follow your curiosity and build across disciplines: CAD, circuits, robots, games and music.
TypeScript 3d-modelingagent-frameworkagent-harnessai-agentscadclaude-codecodexcoding-agentsdeveloper-toolsesp32game-developmentmcp-servermulti-agentopen-hardwareopencodeopenharnesspcbroboticsterminaltmux
Fix PCB front-layer caption: ESP32-S3 module is on the back
Hardware0015a7953825f3c
diff --git a/devices/harness-device/hardware/README.md b/devices/harness-device/hardware/README.mdindex 75df4f3c7..10c8242a1 100644--- a/devices/harness-device/hardware/README.md+++ b/devices/harness-device/hardware/README.md@@ -10,7 +10,7 @@ ESP32-S3-Touch-AMOLED-1.75C-compatible display module.|---|---||  **Assembled device — front**<br>The round AMOLED display sits flush in the housing; the side button is visible on the right edge. |  **Assembled device — rear (cutaway)**<br>Looking into the base: the USB-C clamp holds the port PCB in place, exposing the USB power/data pads (`V`, `-D`, `+D`, `G`). ||  **Housing — empty shell**<br>The 3D-printed housing on its own, before the board is installed: mounting bosses, screw holes, and the USB-C cutout. |  **Housing — with PCB installed**<br>The main board seated in the housing: USB-C connector, display FPC connector, ESP32-S3 module, and supporting components. |-|  **PCB — front (top layer)**<br>Rev 2.0 board render: display FPC connector, dual microphones (green outlines), USB-C connector, and the ESP32-S3 and audio codec ICs. |  **PCB — back (bottom layer)**<br>ESP32-S3-WROOM module (with printed antenna trace), speaker connector (`SPK`), USB connector (`USB`), and the expansion FPC connector (`EXP`). |+|  **PCB — front (top layer)**<br>Rev 2.0 board render: display FPC connector, dual microphones (green outlines), USB-C connector, and the audio codec ICs. The ESP32-S3 module is on the back — see next. |  **PCB — back (bottom layer)**<br>ESP32-S3-WROOM module (with printed antenna trace), speaker connector (`SPK`), USB connector (`USB`), and the expansion FPC connector (`EXP`). |## Bill of Materials