Skip to content

The ultimate harness for coding agents and beyond. All your agents. All your machines. One command center. Start with code, then follow your curiosity and build across disciplines: CAD, circuits, robots, games and music.

Firmware: drop the dev-board vendor's name from comments and docs

0xdiego25620f963083a1
diff --git a/devices/harness-device/firmware/CMakeLists.txt b/devices/harness-device/firmware/CMakeLists.txt
index e77c4156d..de2dbcd96 100644
--- a/devices/harness-device/firmware/CMakeLists.txt
+++ b/devices/harness-device/firmware/CMakeLists.txt
@@ -1,6 +1,6 @@
# Top-level ESP-IDF project file for the Interns commander device.
#
-# Board: Waveshare ESP32-S3-Touch-AMOLED-1.75C (ESP32-S3R8, 466x466 AMOLED CO5300).
+# Board: the Harness device (ESP32-S3R8, 466x466 round AMOLED, CO5300).
# Requires ESP-IDF >= 5.5. Build with: idf.py set-target esp32s3 && idf.py build
cmake_minimum_required(VERSION 3.16)
diff --git a/devices/harness-device/firmware/README.md b/devices/harness-device/firmware/README.md
index cbac0da34..14885560a 100644
--- a/devices/harness-device/firmware/README.md
+++ b/devices/harness-device/firmware/README.md
@@ -12,8 +12,8 @@ Schematics and enclosure designs are coming; they are not included in this repos
## Supported hardware
-The current board family is the Waveshare ESP32-S3-Touch-AMOLED-1.75C: an ESP32-S3 with a 466 × 466
-CO5300 AMOLED display, touch, microphones, and audio output. The firmware detects two touch/board
+The Harness device is an ESP32-S3 with a 466 × 466 CO5300 AMOLED display, touch, microphones, and
+audio output. The firmware detects two touch/board
variants on the I²C bus:
| Variant | Touch | Power management | Display / touch reset pins |
diff --git a/devices/harness-device/firmware/main/app_main.c b/devices/harness-device/firmware/main/app_main.c
index 226abd77a..737d47eb6 100644
--- a/devices/harness-device/firmware/main/app_main.c
+++ b/devices/harness-device/firmware/main/app_main.c
@@ -1,6 +1,6 @@
// Harness dial — entry point and boot.
//
-// Board: Waveshare ESP32-S3-Touch-AMOLED-1.75C.
+// Board: the Harness device (ESP32-S3, 466x466 round AMOLED).
//
// BOOT ─▶ display ─▶ UI ─▶ USB cable link ─▶ the daemon's agent list ─▶ tileview
//
diff --git a/devices/harness-device/firmware/main/audio_capture.c b/devices/harness-device/firmware/main/audio_capture.c
index 835753a9a..16e01757f 100644
--- a/devices/harness-device/firmware/main/audio_capture.c
+++ b/devices/harness-device/firmware/main/audio_capture.c
@@ -155,7 +155,7 @@ bool audio_capture_init(void)
es7210_codec_cfg_t es_cfg = {
.ctrl_if = s_ctrl_if,
- // Match the Waveshare BSP: leave mic_selected at the driver default (the board's mics
+ // Match the vendor BSP: leave mic_selected at the driver default (the board's mics
// aren't necessarily MIC1/MIC2; an explicit wrong selection captures silence).
};
s_es7210 = es7210_codec_new(&es_cfg);
diff --git a/devices/harness-device/firmware/main/board/board_pins.h b/devices/harness-device/firmware/main/board/board_pins.h
index 499a58026..a17bf9cb2 100644
--- a/devices/harness-device/firmware/main/board/board_pins.h
+++ b/devices/harness-device/firmware/main/board/board_pins.h
@@ -1,7 +1,6 @@
-// Pin map for the Waveshare ESP32-S3-Touch-AMOLED-1.75(C).
+// Pin map for the Harness device (ESP32-S3, 466x466 round AMOLED).
//
-// Verified against Waveshare's official BSP:
-// github.com/waveshareteam/Waveshare-ESP32-components → bsp/esp32_s3_touch_amoled_1_75.
+// Verified on both shipped boards — see board/board.c for how the two are told apart at boot.
// The AMOLED is powered directly (no AXP2101 rail gating needed for display),
// reset is a real GPIO, and the panel uses the espressif/esp_lcd_co5300 driver.
#pragma once
@@ -32,8 +31,8 @@
#define BSP_AXP2101_I2C_ADDR 0x34 // present only when board()->has_pmic
// ---- Audio: dual-mic → ES7210 ADC (capture) + ES8311 codec, on the shared I2C; I2S bus ----
-// Pins from the Waveshare BSP (bsp/esp32_s3_touch_amoled_1_75). Mic capture (ES7210) only in v1.
-#define BSP_I2S_MCLK 16 // 1.75C variant: MCLK is GPIO16 (NOT 42 as on 1.75)
+// Mic capture (ES7210) only in v1.
+#define BSP_I2S_MCLK 16 // MCLK is GPIO16 on the shipped board (not 42)
#define BSP_I2S_BCLK 9
#define BSP_I2S_WS 45
#define BSP_I2S_DOUT 8 // codec → ESP (mic data in to ESP)
diff --git a/devices/harness-device/firmware/main/cable_frame.h b/devices/harness-device/firmware/main/cable_frame.h
index 69ebe0142..eafaf1ac5 100644
--- a/devices/harness-device/firmware/main/cable_frame.h
+++ b/devices/harness-device/firmware/main/cable_frame.h
@@ -33,7 +33,7 @@
// ⚠️ THE SECOND BYTE NAMES THE PRODUCT, AND IT IS NOT DECORATION.
//
-// This board is also the board a SIBLING product ships — same Waveshare 466x466 round panel, same
+// This board is also the board a SIBLING product ships — same 466x466 round panel, same
// ESP32-S3, and so the same USB identity (303a:1001, a ROM peripheral whose descriptor cannot be changed
// without giving up the console this port also carries). Its firmware speaks a protocol descended from
// the same ancestor as this one: same framing, and a `hello` carrying the same three fields under the
diff --git a/devices/harness-device/firmware/main/ui/display.c b/devices/harness-device/firmware/main/ui/display.c
index 0c1204a73..a4ef54679 100644
--- a/devices/harness-device/firmware/main/ui/display.c
+++ b/devices/harness-device/firmware/main/ui/display.c
@@ -18,9 +18,9 @@
#include "esp_task_wdt.h"
#include "lvgl.h"
-// CO5300 power-on / init register sequence, taken verbatim from Waveshare's
-// official BSP (bsp/esp32_s3_touch_amoled_1_75). The leading 0xFE/0x19/0x1C
-// block is what was missing before — without it the panel never lights up.
+// CO5300 power-on / init register sequence, taken verbatim from the panel
+// vendor's reference BSP. The leading 0xFE/0x19/0x1C block is what was missing
+// before — without it the panel never lights up.
static const co5300_lcd_init_cmd_t s_co5300_init_cmds[] = {
{0xFE, (uint8_t[]){0x20}, 1, 0},
{0x19, (uint8_t[]){0x10}, 1, 0},
@@ -138,7 +138,7 @@ static void lvgl_task(void *arg)
}
// CO5300 addresses pixels in 2px units, so partial-update areas must start on an
-// even coordinate and end on an odd one (matches Waveshare's BSP rounder).
+// even coordinate and end on an odd one (matches the vendor BSP's rounder).
static void rounder_cb(lv_event_t *e)
{
lv_area_t *area = lv_event_get_param(e);
diff --git a/store/agents/text-to-cad/skills/step-parts/SKILL.md b/store/agents/text-to-cad/skills/step-parts/SKILL.md
index 56822b7c9..1b9a7c1c3 100644
--- a/store/agents/text-to-cad/skills/step-parts/SKILL.md
+++ b/store/agents/text-to-cad/skills/step-parts/SKILL.md
@@ -13,7 +13,7 @@ repository link is only for provenance and release review.
Use the hosted step.parts machine endpoints instead of scraping HTML or relying on local repository files. Treat `https://api.step.parts` as the canonical API origin and `https://www.step.parts` as the site/static-asset origin unless the user provides a different hosted mirror. Network/DNS failures are inconclusive: if `api.step.parts` cannot be reached from the sandbox, retry once with network permission before reporting a miss or using placeholder geometry. Do not describe a part as unavailable unless the API was reachable and returned no relevant candidates.
-When a CAD assembly includes named off-the-shelf actuators, servos, motors, electronics boards, connectors, or other purchasable components, search step.parts before creating simplified placeholder geometry. For named servos, motors, and actuators, search both exact model strings and common aliases/vendor spellings before giving up. For example, `STS3215` may also appear as `ST3215`, `3215`, `Waveshare Feetech ST3215`, or under `family=feetech`. If the API was reachable and no exact or near-exact match is available, record the search miss and then use a documented envelope or simplified stand-in.
+When a CAD assembly includes named off-the-shelf actuators, servos, motors, electronics boards, connectors, or other purchasable components, search step.parts before creating simplified placeholder geometry. For named servos, motors, and actuators, search both exact model strings and common aliases/vendor spellings before giving up. For example, `STS3215` may also appear as `ST3215`, `3215`, `Feetech ST3215`, or under `family=feetech`. If the API was reachable and no exact or near-exact match is available, record the search miss and then use a documented envelope or simplified stand-in.
## Quick Workflow