The ultimate harness for coding agents and beyond. All your agents. All your machines. One command center. Start with code, then follow your curiosity and build across disciplines: CAD, circuits, robots, games and music.
TypeScript 3d-modelingagent-frameworkagent-harnessai-agentscadclaude-codecodexcoding-agentsdeveloper-toolsesp32game-developmentmcp-servermulti-agentopen-hardwareopencodeopenharnesspcbroboticsterminaltmux
Harness OS 0.1.8 (#1500)
Bubu-Dudu-52hz8df82cc2bce2
diff --git a/os/INSTALL.md b/os/INSTALL.mdindex 9dca4f827..9e3aeb0cf 100644--- a/os/INSTALL.md+++ b/os/INSTALL.md@@ -1,6 +1,6 @@# Install Harness on a ThinkPad-These instructions are for **0.1.7**, using a Mac to prepare the USB.+These instructions are for **0.1.8**, using a Mac to prepare the USB.The USB opens the installer directly. Installation begins only when you choose **Install Harness**in the installer; it erases the entire selected disk.@@ -21,20 +21,20 @@ compute still need testing on the actual hardware.## 2. Download and verify on the Mac-From the [0.1.7 release](https://github.com/autonomous-ai/openharness/releases/tag/os-v0.1.7),+From the [0.1.8 release](https://github.com/autonomous-ai/openharness/releases/tag/os-v0.1.8),download both files into the same folder:-- `harness-0.1.7-x86_64.iso`-- `harness-0.1.7-x86_64.iso.sha256`+- `harness-0.1.8-x86_64.iso`+- `harness-0.1.8-x86_64.iso.sha256`If they are in Downloads, open Terminal and run:```shcd ~/Downloads-shasum -a 256 -c harness-0.1.7-x86_64.iso.sha256+shasum -a 256 -c harness-0.1.8-x86_64.iso.sha256```-The result must say `harness-0.1.7-x86_64.iso: OK`.+The result must say `harness-0.1.8-x86_64.iso: OK`.If it does not, download the files again before flashing.## 3. Flash the USBdiff --git a/os/README.md b/os/README.mdindex 0ae516937..c665c8d55 100644--- a/os/README.md+++ b/os/README.md@@ -11,7 +11,7 @@ audience, not its name.Product names and interface copy follow the [Naming System](../docs/naming-system.md).-**Harness 0.1.7:** the USB opens the installer directly. Installation works offline.+**Harness 0.1.8:** the USB opens the installer directly. Installation works offline.After shutdown, remove the USB and boot the installed disk. If disconnected,the Wi-Fi page opens first and advances automatically when connected; Ethernetskips that step. OpenCode starts on the left with two real terminals on the right.diff --git a/os/lock.json b/os/lock.jsonindex 1bea946d2..e72a86394 100644--- a/os/lock.json+++ b/os/lock.json@@ -1,8 +1,12 @@{- "version": "0.1.7",+ "version": "0.1.8","arch_snapshot": "2026/10/01","architecture": "x86_64","upgrades_from": [+ {+ "version": "0.1.7",+ "arch_snapshot": "2026/10/01"+ },{"version": "0.1.6","arch_snapshot": "2026/10/01"