Skip to content

The ultimate harness for coding agents and beyond. All your agents. All your machines. One command center. Start with code, then follow your curiosity and build across disciplines: CAD, circuits, robots, games and music.

Harness OS 0.1.14 (#2738)

Bubu-Dudu-52hza34a5ea7eda0
diff --git a/os/INSTALL.md b/os/INSTALL.md
index e5a29a61d..43012f775 100644
--- a/os/INSTALL.md
+++ b/os/INSTALL.md
@@ -1,6 +1,6 @@
# Install Harness on a ThinkPad
-These instructions are for **0.1.13**, using a Mac to prepare the USB.
+These instructions are for **0.1.14**, using a Mac to prepare the USB.
The USB opens the installer directly. Installation begins only when you choose **Install Harness**
in the installer; it erases the entire selected disk.
@@ -21,20 +21,20 @@ compute still need testing on the actual hardware.
## 2. Download and verify on the Mac
-From the [0.1.13 release](https://github.com/autonomous-ai/openharness/releases/tag/os-v0.1.13),
+From the [0.1.14 release](https://github.com/autonomous-ai/openharness/releases/tag/os-v0.1.14),
download both files into the same folder:
-- `harness-0.1.13-x86_64.iso`
-- `harness-0.1.13-x86_64.iso.sha256`
+- `harness-0.1.14-x86_64.iso`
+- `harness-0.1.14-x86_64.iso.sha256`
If they are in Downloads, open Terminal and run:
```sh
cd ~/Downloads
-shasum -a 256 -c harness-0.1.13-x86_64.iso.sha256
+shasum -a 256 -c harness-0.1.14-x86_64.iso.sha256
```
-The result must say `harness-0.1.13-x86_64.iso: OK`.
+The result must say `harness-0.1.14-x86_64.iso: OK`.
If it does not, download the files again before flashing.
## 3. Flash the USB
diff --git a/os/README.md b/os/README.md
index c45085815..eb1eed56c 100644
--- a/os/README.md
+++ b/os/README.md
@@ -11,7 +11,7 @@ audience, not its name.
Product names and interface copy follow the [Naming System](../docs/naming-system.md).
-**Harness 0.1.13:** the USB opens the installer directly. Installation works offline.
+**Harness 0.1.14:** the USB opens the installer directly. Installation works offline.
After shutdown, remove the USB and boot the installed disk. If disconnected,
the Wi-Fi page opens first and advances automatically when connected; Ethernet
skips that step. OpenCode starts on the left with two real terminals on the right.
diff --git a/os/lock.json b/os/lock.json
index c79903eda..cde7abbbb 100644
--- a/os/lock.json
+++ b/os/lock.json
@@ -1,8 +1,12 @@
{
- "version": "0.1.13",
+ "version": "0.1.14",
"arch_snapshot": "2026/10/01",
"architecture": "x86_64",
"upgrades_from": [
+ {
+ "version": "0.1.13",
+ "arch_snapshot": "2026/10/01"
+ },
{
"version": "0.1.12",
"arch_snapshot": "2026/10/01"