The ultimate harness for coding agents and beyond. All your agents. All your machines. One command center. Start with code, then follow your curiosity and build across disciplines: CAD, circuits, robots, games and music.
TypeScript 3d-modelingagent-frameworkagent-harnessai-agentscadclaude-codecodexcoding-agentsdeveloper-toolsesp32game-developmentmcp-servermulti-agentopen-hardwareopencodeopenharnesspcbroboticsterminaltmux
fix(harness-pro): the top band is the tabs', the bell takes the corner
0xdiego25e5c1355858ec
diff --git a/devices/harness-device/firmware/main/ui/metrics_round466.h b/devices/harness-device/firmware/main/ui/metrics_round466.hindex 146dcb816..16a3dcd7d 100644--- a/devices/harness-device/firmware/main/ui/metrics_round466.h+++ b/devices/harness-device/firmware/main/ui/metrics_round466.h@@ -113,3 +113,11 @@// tile is what the carousel already is. The dial's home stays the carousel.#define UI_DESK_GRID 0+// ── the notification pill ───────────────────────────────────────────────────────────────────────────+// WHAT SHIPPED, unchanged: a small badge in the top band, where a 466 circle has room for a small badge+// and nothing else. The square's version is a corner control and is sized for a thumb — see its file.+#define NOTIF_FAB_PAD_H 13+#define NOTIF_FAB_PAD_V 4+#define NOTIF_PILL_FONT (&lv_font_montserrat_22)+#define NOTIF_PILL_GAP 6+diff --git a/devices/harness-device/firmware/main/ui/metrics_square720.h b/devices/harness-device/firmware/main/ui/metrics_square720.hindex 7b9560cb9..ba190001b 100644--- a/devices/harness-device/firmware/main/ui/metrics_square720.h+++ b/devices/harness-device/firmware/main/ui/metrics_square720.h@@ -137,6 +137,41 @@#define DESK_STRIP_H 52#define DESK_TAB_H 52#define DESK_TAB_NAME_MAX 300+// THE TOP BAND IS THE TABS' AND NOTHING ELSE'S.+//+// The bell had a seat here for one build, and it cost twice. With nothing to report the seat was an+// empty 84px gap that read as a bug; to make the seat at all the strip had to give up the width, which+// pushed the last tab under a fade — and a fade is a gradient, not an affordance, so the screen stopped+// saying there were more tabs at all (owner, 2026-09-28, two photos).+//+// The bell went to the bottom-right corner instead, where this face had room going spare. See+// NOTIF_FAB_* below and the align in ui_screens.c.+#define DESK_STRIP_W (UI_FACE_W - 2 * DESK_STRIP_X)++// ── the notification button, bottom right ───────────────────────────────────────────────────────────+// A FLOATING control, not a reserved one: it is drawn only when something is waiting, so it can sit+// over whatever is behind it — the desk's corner tile, the empty air under an agent — and cost nothing+// on every screen where the count is zero, which is most of them.+#define NOTIF_FAB_MARGIN SCREEN_PAD++// 30% SMALLER AND HALF LIT, because it is not news — it is a count that sits there.+//+// At 64px in full blue it was the brightest thing on a face that is on all day, in the corner the eye+// rests in, saying only "two things are waiting" (owner, 2026-09-28: "nó sáng quá gây distract"). A+// notification the size of a button and the brightness of an alert asks to be dealt with now; this one+// does not. So it keeps its corner and stops shouting from it.+//+// Every number below is the old one times 0.7, and the font follows: montserrat_22's line box is ~26,+// so 26 + 2*10 = NOTIF_FAB_H, and the circle is still full rather than a ring around a small mark.+#define NOTIF_FAB_H 46+#define NOTIF_FAB_PAD_H 15+#define NOTIF_FAB_PAD_V 10+#define NOTIF_PILL_FONT (&lv_font_montserrat_22)+#define NOTIF_PILL_GAP 7+// On the OBJECT, not on the background: the fill, the glyph and the count dim together, so it reads as+// one quiet control rather than as bright text on a faded disc.+#define NOTIF_FAB_OPA LV_OPA_50+#define NOTIF_FAB_SHADOW 17#define DESK_MARK_LG 40#define DESK_MARK_MD 32diff --git a/devices/harness-device/firmware/main/ui/touch.c b/devices/harness-device/firmware/main/ui/touch.cindex ad9ff013f..03ff58c5a 100644--- a/devices/harness-device/firmware/main/ui/touch.c+++ b/devices/harness-device/firmware/main/ui/touch.c@@ -263,26 +263,32 @@ static void swipe_track(bool pressed, uint16_t x, uint16_t y)int home_edge = reader ? READER_HOME_EDGE_PX : BOTTOM_EDGE_PX;// HOME gesture: an upward swipe that STARTED at the bottom edge → jump to Overview. (y grows downward;// the driver already applies the panel mirror, so sy near y_max = the physical bottom.)- // THE DESK OWNS THE GLASS WHILE IT IS UP, AND IT IS HOME. Its tiles take taps through LVGL; what- // this classifier must not do is act on the carousel underneath — a horizontal swipe here would- // walk agents on a screen that is not showing them, and the home swipe has nowhere to go, because- // this IS where home goes. So on the desk it answers nothing.+ // THE DESK OWNS THE GLASS WHILE IT IS UP — with ONE exception.+ //+ // Everything this classifier would do while the grid is up acts on the carousel UNDERNEATH: a+ // sideways swipe walks agents on a screen that is not showing them, and the deferred tap belongs+ // to the tile behind. Both stay refused. (The grid's own tiles are pressed through LVGL's indev,+ // not through here, which is why refusing them costs nothing.)+ //+ // The exception is the bottom-edge swipe up. It is the way to the Overview from anywhere, and+ // swallowing it here left that screen — the one that names the machine and carries Settings and+ // the fleet count — with no way in at all while the grid was up (owner, 2026-09-28).#if UI_DESK_GRID- if (!voice && ui_desk_is_open()) {- /* home is already on screen — nothing above it, nothing beside it */- } else+ const bool desk_holds = !voice && ui_desk_is_open();+#else+ const bool desk_holds = false;#endifif (!voice && sy >= home_edge && dy < -SWIPE_MIN_PX && abs(dy) > abs(dx)) {ESP_LOGI(TAG, "gesture: home (dy=%d)", dy);ui_home_overview();- } else if (!voice && (dx > SWIPE_MIN_PX || dx < -SWIPE_MIN_PX) && abs(dx) > abs(dy)) {+ } else if (!voice && !desk_holds && (dx > SWIPE_MIN_PX || dx < -SWIPE_MIN_PX) && abs(dx) > abs(dy)) {ESP_LOGI(TAG, "gesture: swipe %+d (dx=%d dy=%d)", dx > 0 ? 1 : -1, dx, dy);ui_swipe_end(dx > 0 ? 1 : -1); // reader → back to the agent; carousel screens → wrap next/prev}// A vertical drag is NOT classified here any more — it went out as it happened (above). One// gesture cannot mean two things: while it also opened the detail reader, every scroll ended by// opening a screen nobody asked for. Tapping the recap card opens it, which is the route it kept.- else if (abs(dx) < LONG_MOVE_PX && abs(dy) < LONG_MOVE_PX+ else if (!desk_holds && abs(dx) < LONG_MOVE_PX && abs(dy) < LONG_MOVE_PX&& lv_tick_elaps(t0) < TAP_MAX_MS) { // near-still TAP// A tap while RECORDING always stops the voice — on EVERY screen, including the reader (this is the// only touch way to end a turn started by double-tap there). The deferred open/close tap, however,diff --git a/devices/harness-device/firmware/main/ui/ui_screens.c b/devices/harness-device/firmware/main/ui/ui_screens.cindex be62b90e3..a609c41f7 100644--- a/devices/harness-device/firmware/main/ui/ui_screens.c+++ b/devices/harness-device/firmware/main/ui/ui_screens.c@@ -2385,19 +2385,51 @@ void ui_init(void)lv_obj_set_style_bg_color(s_notif_pill, lv_color_hex(0x006fff), 0); // Figma blue 🔔 badgelv_obj_set_style_bg_opa(s_notif_pill, LV_OPA_COVER, 0);lv_obj_set_style_radius(s_notif_pill, LV_RADIUS_CIRCLE, 0);- lv_obj_set_style_pad_hor(s_notif_pill, 13, 0);- lv_obj_set_style_pad_ver(s_notif_pill, 4, 0);+ lv_obj_set_style_pad_hor(s_notif_pill, NOTIF_FAB_PAD_H, 0);+ lv_obj_set_style_pad_ver(s_notif_pill, NOTIF_FAB_PAD_V, 0);+#if UI_DESK_GRID+ /*+ * BOTTOM RIGHT, floating, and only when there is something to say.+ *+ * The top band belongs to the tabs. Down here the face had room going spare — an agent tile's+ * words end around y=560 and the grid's last row is the only thing that comes near — and a control+ * that appears and disappears is exactly what a corner is for: nothing reserves the space, so there+ * is no state in which the screen looks like it is missing a piece.+ */+ /*+ * NO min_height. The size comes from the glyphs.+ *+ * It was pinned to 64px while the bell inside stayed at montserrat_14 — a 14px mark in a 64px+ * circle, with 25px of empty blue all round it. That is not a control, it is a hole with a dot in+ * it (owner, 2026-09-28: "vẽ vòng tròn to đùng, cái icon noti bé tí, nhìn như lỗi UI").+ *+ * So the glyphs are sized for this face and the padding is what makes the circle: montserrat_30+ * for both, 14px of vertical padding, and the box lands at NOTIF_FAB_H on its own — full, and+ * still the right size for a thumb.+ */+ lv_obj_set_style_opa(s_notif_pill, NOTIF_FAB_OPA, 0);+ lv_obj_set_style_shadow_width(s_notif_pill, NOTIF_FAB_SHADOW, 0);+ lv_obj_set_style_shadow_opa(s_notif_pill, LV_OPA_40, 0);+ lv_obj_set_style_shadow_color(s_notif_pill, lv_color_black(), 0);+ lv_obj_align(s_notif_pill, LV_ALIGN_BOTTOM_RIGHT, -NOTIF_FAB_MARGIN, -NOTIF_FAB_MARGIN);+#elselv_obj_align(s_notif_pill, LV_ALIGN_TOP_MID, 0, 22);+#endiflv_obj_set_style_bg_opa(s_notif_pill, LV_OPA_80, LV_STATE_PRESSED); // it presses now, so it says so+#if UI_DESK_GRID+ // …and at half opacity a background that merely goes to 80% is not a visible press. The whole+ // control comes UP to full on touch instead: quiet until a thumb is on it, then plainly lit.+ lv_obj_set_style_opa(s_notif_pill, LV_OPA_COVER, LV_STATE_PRESSED);+#endiflv_obj_set_flex_flow(s_notif_pill, LV_FLEX_FLOW_ROW);lv_obj_set_flex_align(s_notif_pill, LV_FLEX_ALIGN_CENTER, LV_FLEX_ALIGN_CENTER, LV_FLEX_ALIGN_CENTER);- lv_obj_set_style_pad_column(s_notif_pill, 6, 0);+ lv_obj_set_style_pad_column(s_notif_pill, NOTIF_PILL_GAP, 0);{ lv_obj_t *bell = lv_label_create(s_notif_pill);- lv_obj_set_style_text_font(bell, &lv_font_montserrat_14, 0);+ lv_obj_set_style_text_font(bell, NOTIF_PILL_FONT, 0);lv_obj_set_style_text_color(bell, COL_FG, 0);lv_label_set_text(bell, LV_SYMBOL_BELL);s_notif_pill_lbl = lv_label_create(s_notif_pill);- lv_obj_set_style_text_font(s_notif_pill_lbl, &lv_font_montserrat_22, 0);+ lv_obj_set_style_text_font(s_notif_pill_lbl, NOTIF_PILL_FONT, 0);lv_obj_set_style_text_color(s_notif_pill_lbl, COL_FG, 0);lv_label_set_text(s_notif_pill_lbl, "0"); }lv_obj_add_flag(s_notif_pill, LV_OBJ_FLAG_HIDDEN);@@ -6368,9 +6400,21 @@ static void desk_only_agent(char *out, size_t cap)*/static void tabline_sync(void){+ /*+ * THE OVERVIEW IS IN A TAB TOO, and used to be on the hidden list with Settings and Machines.+ *+ * That was wrong on its own terms — the Overview names the machine whose window owns these very+ * tabs — and it became visibly wrong the moment the bottom-edge swipe started landing there: the+ * line vanished and, if nothing re-armed a landing, never came back. Which is exactly how it looks+ * from the outside: plug the device into another computer, plug it back, and the tabs are gone+ * (owner, 2026-09-28).+ *+ * Settings, Machines and the pickers stay hidden. Those are not in a tab, and a tab line over them+ * is an offer to leave a screen that has its own job.+ */const bool want = !display_is_asleep() && !s_notif_open && s_swarm_count > 0 &&(s_desk_open ||- (lv_screen_active() == scr_projects && !s_overview_active &&+ (lv_screen_active() == scr_projects &&!s_settings_active && !s_machines_active));if (!want) { set_hidden(s_tabline, true); return; }@@ -6378,7 +6422,7 @@ static void tabline_sync(void)s_tabline = lv_obj_create(lv_layer_top());lv_obj_remove_style_all(s_tabline);lv_obj_set_pos(s_tabline, DESK_STRIP_X, DESK_STRIP_Y);- lv_obj_set_size(s_tabline, UI_FACE_W - 2 * DESK_STRIP_X, DESK_STRIP_H);+ lv_obj_set_size(s_tabline, DESK_STRIP_W, DESK_STRIP_H);lv_obj_set_flex_flow(s_tabline, LV_FLEX_FLOW_ROW);lv_obj_set_flex_align(s_tabline, LV_FLEX_ALIGN_START, LV_FLEX_ALIGN_CENTER, LV_FLEX_ALIGN_CENTER);lv_obj_set_style_pad_column(s_tabline, 6, 0);@@ -6577,11 +6621,16 @@ void ui_home_overview(void)if (s_bright_dragging) return; // a brightness-slider drag on Settings is not a home swipe (mirror ui_swipe_*)ui_notif_close(); // no-op if closed; takes/releases the lock itself (must not nest inside our lock)#if UI_DESK_GRID- // On a face with room for the shape, HOME IS THE SHAPE. The carousel still exists — it is what walks- // between agents once you are in one — but it stops being how you find anything, so the gesture that- // used to land on the Overview ring lands on the desk instead.- ui_desk_open();- return;+ // THE BOTTOM-EDGE SWIPE MEANS THE OVERVIEW ON BOTH FACES.+ //+ // It used to open the desk here, on the reading that a face with room for the shape should make the+ // shape its home. The desk IS still where this board lands and what back goes to — but that is not+ // the same as owning this gesture, and giving it away left the Overview with no way in at all: the+ // desk covers the carousel, so the one screen that names the machine and carries Settings and the+ // fleet count could only be reached by leaving the grid sideways (owner, 2026-09-28).+ //+ // The desk has its own way back (pinch, or the back key) and does not need this one too.+ ui_desk_close();#endifdisplay_lock();swarm_picker_close();@@ -6682,8 +6731,16 @@ static void notif_badge_apply(void)}// The Overview has its own bell on the lower arc, with the count as a badge; the top-edge pill is// for the agent tiles, which have no seat for one.+#if UI_DESK_GRID+ // The same rule the tab line keeps: everywhere you are inside a tab, which now includes the+ // Overview and the desk. In the corner it collides with nothing, so the reasons it used to be+ // hidden on those two — a top band it had to share — are gone with the seat.+ bool show = n > 0 && !display_is_asleep() && lv_screen_active() == scr_projects+ && !s_settings_active && !s_machines_active && !s_notif_open;+#elsebool show = n > 0 && !display_is_asleep() && lv_screen_active() == scr_projects&& !s_settings_active && !s_machines_active && !s_notif_open && !s_overview_active;+#endifset_hidden(s_notif_pill, !show);if (show && s_notif_pill_lbl) { char b[8]; snprintf(b, sizeof b, "%d", n); lv_label_set_text(s_notif_pill_lbl, b); }if (s_overview_bell_badge) {diff --git a/devices/harness-device/firmware/scripts/upload-firmware.sh b/devices/harness-device/firmware/scripts/upload-firmware.shindex f5f77e720..9efea1f3a 100755--- a/devices/harness-device/firmware/scripts/upload-firmware.sh+++ b/devices/harness-device/firmware/scripts/upload-firmware.sh@@ -33,6 +33,20 @@ GCS_PUBLIC_BASE_URL="${GCS_PUBLIC_BASE_URL:-https://storage.googleapis.com/${GCSMETADATA_PATH="${METADATA_PATH:-harness/esp32/ota/metadata.json}"OTA_KEY="${OTA_KEY:-commander}" # must match DEVICE_OTA_KEY in main/config_store.h+# WHICH SILICON THIS RELEASE IS FOR, NAMED OUT LOUD.+#+# One project builds for two boards now, and this script builds into its own fresh directory — so+# nothing in it says which. ESP-IDF then GUESSES, and what it guesses from is a stale `sdkconfig`+# left in the firmware directory by whoever built last. On this desk that happened to say esp32s3+# and the release looked fine; on a clean checkout, where no such file exists, IDF falls back to+# plain `esp32` and the build dies at CMake (verified, 2026-09-28).+#+# Loud rather than silent, so this was never going to ship the wrong image — but it was going to+# stop working the first time it ran anywhere but here, which for a release script is the same+# problem one step later. The pair moves together: OTA_KEY names the manifest entry, and this names+# the chip whose image goes in it.+IDF_TARGET_BOARD="${IDF_TARGET_BOARD:-esp32s3}"+next_firmware_version() {local current="$1" major minor patchif [[ ! "$current" =~ ^([0-9]+)\.([0-9]+)\.([0-9]+)$ ]]; then@@ -162,12 +176,12 @@ if [ "$DO_BUILD" -eq 1 ]; thenrm -f "$RELEASE_SDKCONFIG"echo ">> building… (prod: -DDEVICE_FORCE_PROD=1, build dir $BUILD_DIR, fresh config from sdkconfig.defaults)"BUILD_LOG="$(mktemp)"- if ! idf.py -C "$HERE" -B "$BUILD_DIR" -DSDKCONFIG="$RELEASE_SDKCONFIG" -DDEVICE_FORCE_PROD=1 build 2>&1 | tee "$BUILD_LOG"; then+ if ! idf.py -C "$HERE" -B "$BUILD_DIR" -DIDF_TARGET="$IDF_TARGET_BOARD" -DSDKCONFIG="$RELEASE_SDKCONFIG" -DDEVICE_FORCE_PROD=1 build 2>&1 | tee "$BUILD_LOG"; thenif grep -q "idf.py fullclean" "$BUILD_LOG"; thenecho ">> build env changed; running idf.py fullclean and retrying once"idf.py -C "$HERE" -B "$BUILD_DIR" fullcleanrm -f "$RELEASE_SDKCONFIG"- idf.py -C "$HERE" -B "$BUILD_DIR" -DSDKCONFIG="$RELEASE_SDKCONFIG" -DDEVICE_FORCE_PROD=1 build+ idf.py -C "$HERE" -B "$BUILD_DIR" -DIDF_TARGET="$IDF_TARGET_BOARD" -DSDKCONFIG="$RELEASE_SDKCONFIG" -DDEVICE_FORCE_PROD=1 buildelseexit 1fidiff --git a/devices/harness-device/firmware/sdkconfig.defaults.esp32s3 b/devices/harness-device/firmware/sdkconfig.defaults.esp32s3index d6592564c..7bc6fe2f0 100644--- a/devices/harness-device/firmware/sdkconfig.defaults.esp32s3+++ b/devices/harness-device/firmware/sdkconfig.defaults.esp32s3@@ -3,8 +3,13 @@# Split out of sdkconfig.defaults when the Pro's ESP32-P4 target arrived; the values are unchanged from# what shipped, so a dial built before and after the split gets the same sdkconfig.#-# CONFIG_IDF_TARGET lives here rather than in the shared file so that `idf.py build` in a fresh-# checkout still means "the dial" — ESP-IDF falls back to this when nothing else names a target.+# CONFIG_IDF_TARGET lives here because this is the dial's file, and that is all it does.+#+# IT DOES NOT MAKE A TARGETLESS BUILD MEAN "THE DIAL", which an earlier version of this comment+# claimed. ESP-IDF only reads sdkconfig.defaults.<target> once it already knows the target, so the+# claim was circular: with no target named, IDF guesses from a stale `sdkconfig` if one is lying+# around and falls back to plain `esp32` if not. Anything that builds this project says which board+# it wants — the build dirs pass -DSDKCONFIG, and scripts/upload-firmware.sh pins -DIDF_TARGET.CONFIG_IDF_TARGET="esp32s3"CONFIG_ESPTOOLPY_FLASHFREQ_80M=y