"rsync for cloud storage" - Google Drive, S3, Dropbox, Backblaze B2, One Drive, Swift, Hubic, Wasabi, Google Cloud Storage, Azure Blob, Azure Files, Yandex Files
Go azure-blobazure-blob-storageazure-filesbackblaze-b2cloud-storagedropboxencryptionftpfuse-filesystemgogolanggoogle-cloud-storagegoogle-driveonedriveopenstack-swiftrclones3sftpsyncwebdav
docs: fix markdownlint issue md009/no-trailing-spaces
albertony0506826ff52b
diff --git a/docs/content/changelog.md b/docs/content/changelog.mdindex 287008d03..e1cfac05c 100644--- a/docs/content/changelog.md+++ b/docs/content/changelog.md@@ -440,7 +440,7 @@ description: "Rclone Changelog"* Changed backends* [S3](/s3/) backend updated to use [AWS SDKv2](https://github.com/aws/aws-sdk-go-v2) as v1 is now unsupported.* The matrix of providers and auth methods is huge and there could be problems with obscure combinations.- * Please report problems in a [new issue](https://github.com/rclone/rclone/issues/new/choose) on Github.+ * Please report problems in a [new issue](https://github.com/rclone/rclone/issues/new/choose) on Github.* New commands* [config encryption](/commands/rclone_config_encryption/): set, remove and check to manage config file encryption (Nick Craig-Wood)* New Featuresdiff --git a/docs/content/docs.md b/docs/content/docs.mdindex 6cd3e7fee..dc7039073 100644--- a/docs/content/docs.md+++ b/docs/content/docs.md@@ -282,9 +282,9 @@ However using the connection string syntax, this does work.rclone copy "gdrive,shared_with_me:shared-file.txt" gdrive:-Note that the connection string only affects the options of the immediate-backend. If for example gdriveCrypt is a crypt based on gdrive, then the-following command **will not work** as intended, because+Note that the connection string only affects the options of the immediate+backend. If for example gdriveCrypt is a crypt based on gdrive, then the+following command **will not work** as intended, because`shared_with_me` is ignored by the crypt backend:rclone copy "gdriveCrypt,shared_with_me:shared-file.txt" gdriveCrypt:@@ -617,8 +617,8 @@ name of the log level to set with option `--log-level`, are caseinsensitive, e.g. `--log-level ERROR` and `--log-level error` areidentical.-Options documented to take a `stringArray` parameter accept multiple-values. To pass more than one value, repeat the option; for example:+Options documented to take a `stringArray` parameter accept multiple+values. To pass more than one value, repeat the option; for example:`--include value1 --include value2`. Other options may only accept asingle value, and should only be specified once, but where thespecified parameter may indicate a list of values separated by space@@ -893,21 +893,21 @@ objects to transfer is held in memory before the transfers start.### --checkers int-Originally controlling just the number of file checkers to run in parallel,-e.g. by `rclone copy`. Now a fairly universal parallelism control-used by `rclone` in several places.+Originally controlling just the number of file checkers to run in parallel,+e.g. by `rclone copy`. Now a fairly universal parallelism control+used by `rclone` in several places.-Note: checkers do the equality checking of files during a sync.-For some storage systems (e.g. S3, Swift, Dropbox) this can take+Note: checkers do the equality checking of files during a sync.+For some storage systems (e.g. S3, Swift, Dropbox) this can takea significant amount of time so they are run in parallel.-The default is to run 8 checkers in parallel. However, in case+The default is to run 8 checkers in parallel. However, in caseof slow-reacting backends you may need to lower (rather than increase)-this default by setting `--checkers` to 4 or less threads. This is-especially advised if you are experiencing backend server crashes-during file checking phase (e.g. on subsequent or top-up backups-where little or no file copying is done and checking takes up-most of the time). Increase this setting only with utmost care,+this default by setting `--checkers` to 4 or less threads. This is+especially advised if you are experiencing backend server crashes+during file checking phase (e.g. on subsequent or top-up backups+where little or no file copying is done and checking takes up+most of the time). Increase this setting only with utmost care,while monitoring your server health and file checking throughput.### -c, --checksum@@ -1089,7 +1089,7 @@ See `--compare-dest` and `--backup-dir`.### --dedupe-mode interactive|skip|first|newest|oldest|largest|smallest|rename|list-Mode to run dedupe command in. One of `interactive`, `skip`, `first`,+Mode to run dedupe command in. One of `interactive`, `skip`, `first`,`newest`, `oldest`, `largest`, `smallest`, `rename` `list`. The defaultis `interactive`. See the [dedupe](/commands/rclone_dedupe/) commandfor more information as to what these options mean.@@ -1393,7 +1393,7 @@ flag set) such as:Without `--inplace` (the default) rclone will first upload to atemporary file with an extension like this, where `XXXXXX` represents a-hash of the source file's fingerprint and `.partial` is+hash of the source file's fingerprint and `.partial` is[--partial-suffix](#partial-suffix) value (`.partial` by default).original-file-name.XXXXXX.partial@@ -3111,8 +3111,8 @@ override the environment variable setting.Or to always use the trash in drive `--drive-use-trash`, set`RCLONE_DRIVE_USE_TRASH=true`.-Verbosity is slightly different, the environment variable-equivalent of `--verbose` or `-v` is `RCLONE_VERBOSE=1`,+Verbosity is slightly different, the environment variable+equivalent of `--verbose` or `-v` is `RCLONE_VERBOSE=1`,or for `-vv`, `RCLONE_VERBOSE=2`.The same parser is used for the options and the environment variables@@ -3179,9 +3179,9 @@ $ rclone lsd MYS3:```-Note that you can only set the options of the immediate backend,-so RCLONE_CONFIG_MYS3CRYPT_ACCESS_KEY_ID has no effect, if myS3Crypt is-a crypt remote based on an S3 remote. However RCLONE_S3_ACCESS_KEY_ID will+Note that you can only set the options of the immediate backend,+so RCLONE_CONFIG_MYS3CRYPT_ACCESS_KEY_ID has no effect, if myS3Crypt is+a crypt remote based on an S3 remote. However RCLONE_S3_ACCESS_KEY_ID willset the access key of all remotes using S3, including myS3Crypt.Note also that now rclone has [connection strings](#connection-strings),diff --git a/docs/content/downloads.md b/docs/content/downloads.mdindex 05543ed0f..40b2aa606 100644--- a/docs/content/downloads.md+++ b/docs/content/downloads.md@@ -15,7 +15,7 @@ image](https://securebuild.com/images/rclone) through our partner## Release {{% version %}} OS requirements {#osrequirements}-| OS | Minimum Version |+| OS | Minimum Version ||:-------:|:-------:|| Linux | Kernel 3.2 || macOS | 11 (Big Sur) |@@ -118,7 +118,7 @@ script) from a URL which doesn't change then you can use these links.Older downloads can be found [here](https://downloads.rclone.org/).The latest `rclone` version working for:-| OS | Maximum rclone version |+| OS | Maximum rclone version ||:-------:|:-------:|| Windows 7 | v1.63.1 || Windows Server 2008 | v1.63.1 |diff --git a/docs/content/faq.md b/docs/content/faq.mdindex 29104716e..9ef3ab871 100644--- a/docs/content/faq.md+++ b/docs/content/faq.md@@ -247,7 +247,7 @@ value, say `export GOGC=20`. This will make the garbage collectorwork harder, reducing memory size at the expense of CPU usage.The most common cause of rclone using lots of memory is a single-directory with millions of files in.+directory with millions of files in.Before rclone v1.70 has to load this entirely into memory as rcloneobjects. Each rclone object takes 0.5k-1k of memory. There isdiff --git a/docs/content/rc.md b/docs/content/rc.mdindex 48f7bf99c..d65cb8b15 100644--- a/docs/content/rc.md+++ b/docs/content/rc.md@@ -19,7 +19,7 @@ If you just want to run a remote control then see the [rcd](/commands/rclone_rcd### --rcFlag to start the http server listen on remote requests.-+### --rc-addr=IPIPaddress:Port or :Port to bind server to. (default "localhost:5572").