Skip to content

Display and control your Android device

Reorder options to maintain alphabetical order

Romain Vimont4c4a03ebe167
diff --git a/app/scrcpy.1 b/app/scrcpy.1
index d506d9e7..a30e7db0 100644
--- a/app/scrcpy.1
+++ b/app/scrcpy.1
@@ -33,14 +33,6 @@ Lower values decrease the latency, but increase the likelyhood of buffer underru
Default is 50.
-.TP
-.BI "\-\-audio\-output\-buffer ms
-Configure the size of the SDL audio output buffer (in milliseconds).
-
-If you get "robotic" audio playback, you should test with a higher value (10). Do not change this setting otherwise.
-
-Default is 5.
-
.TP
.BI "\-\-audio\-codec " name
Select an audio codec (opus, aac or raw).
@@ -63,6 +55,14 @@ Use a specific MediaCodec audio encoder (depending on the codec provided by \fB\
The available encoders can be listed by \-\-list\-encoders.
+.TP
+.BI "\-\-audio\-output\-buffer ms
+Configure the size of the SDL audio output buffer (in milliseconds).
+
+If you get "robotic" audio playback, you should test with a higher value (10). Do not change this setting otherwise.
+
+Default is 5.
+
.TP
.BI "\-b, \-\-video\-bit\-rate " value
Encode the video at the given bit\-rate, expressed in bits/s. Unit suffixes are supported: '\fBK\fR' (x1000) and '\fBM\fR' (x1000000).
diff --git a/app/src/cli.c b/app/src/cli.c
index 1b42f75c..01b55406 100644
--- a/app/src/cli.c
+++ b/app/src/cli.c
@@ -134,16 +134,6 @@ static const struct sc_option options[] = {
"likelyhood of buffer underrun (causing audio glitches).\n"
"Default is 50.",
},
- {
- .longopt_id = OPT_AUDIO_OUTPUT_BUFFER,
- .longopt = "audio-output-buffer",
- .argdesc = "ms",
- .text = "Configure the size of the SDL audio output buffer (in "
- "milliseconds).\n"
- "If you get \"robotic\" audio playback, you should test with "
- "a higher value (10). Do not change this setting otherwise.\n"
- "Default is 5.",
- },
{
.longopt_id = OPT_AUDIO_CODEC,
.longopt = "audio-codec",
@@ -171,6 +161,16 @@ static const struct sc_option options[] = {
"codec provided by --audio-codec).\n"
"The available encoders can be listed by --list-encoders.",
},
+ {
+ .longopt_id = OPT_AUDIO_OUTPUT_BUFFER,
+ .longopt = "audio-output-buffer",
+ .argdesc = "ms",
+ .text = "Configure the size of the SDL audio output buffer (in "
+ "milliseconds).\n"
+ "If you get \"robotic\" audio playback, you should test with "
+ "a higher value (10). Do not change this setting otherwise.\n"
+ "Default is 5.",
+ },
{
.shortopt = 'b',
.longopt = "video-bit-rate",