Free, open-source 3D sculpting for Linux, macOS and Windows: dense meshes, remeshing, painting, built-in AI (image/text to 3D), Send to Unreal, game-ready LODs, Gaussian splats and OpenUSD.
Projects, autosave and snapshots
A SculptForge project (.sfproj) saves your whole scene in one file, so you can close the app and carry on exactly
where you stopped. This chapter covers saving and opening projects, the unsaved-changes prompt, recent files,
autosave and crash recovery, snapshots, and the Library tabs that show your work.
What a project keeps
A .sfproj file holds everything SculptForge knows about the scene:
- every Part, with its name, visibility, mesh, mask, vertex paint, face groups, hidden faces and UVs;
- every sculpt layer with its weight, and the active layer of each Part;
- each Part's Quad Remesh Guides, the curves Quad Remesh's edge loops follow;
- loaded Gaussian splats and their placement;
- your custom brushes, so a project opened on another computer still has them;
- the camera, the material and display settings, the brush, Size, Intensity (and Smooth's), Colour intensity, Falloff, paint colour and symmetry;
- a thumbnail, shown in the Library.
Undo history isn't saved: an opened project starts with a clean history.
Model formats such as OBJ, GLB or FBX can't hold all of this (masks, hidden faces, splats, brushes), so writing them is an export, not a save. See Exporting.
Save a project
- File > Save (Ctrl+S) saves to the current project. The first time, it asks for a file name.
- File > Save As... (Ctrl+Shift+S) saves under a new name.
- In the Classic layout, clicking the document name in the title strip also saves.
The bar along the top shows the file name with * after it while there are unsaved changes, and so does the window
title, which starts with the file name. Any edit in any Part counts, as do splat edits and layer weight changes.
The window title and the top bar also show the SculptForge version, so a screenshot says which one you run.
If you opened a model file (an OBJ, say) rather than a project, Save asks where to save a new .sfproj; the
original model file is left alone.
Open a project or model
- File > Open... (Ctrl+O) opens a project, a model or a splat capture. Opening a project or model replaces the scene.
- File > Open Recent lists the last 10 files you opened or saved. Files that no longer exist are dropped from the list. Clear Recent empties it.
- Drop a file onto the window to open it.
- In the Library, double-click a project or model.
File > New Sphere (Ctrl+N) and File > New Plane start a fresh scene.
When you open a project, its saved camera, material and brush settings come back too.
Start from a starter mesh
Instead of a sphere, start from a base mesh with clean, even quads: File > New from Starter Mesh lists them, the Library's Tool tab has a Starter meshes folder with a thumbnail of each, and the welcome's Start from a head opens the human head straight away.
| Starter mesh | What it is |
|---|---|
| Human Head | A neutral head and neck with loops round the eyes and mouth, for portraits |
| Bust | Head, neck, shoulders and upper chest |
| Full Body | A human figure in A-pose, 167 cm tall |
| Hand, Foot, Ear | A left hand (raised, palm to the front), a left foot and ankle, a left ear |
| Eye | An eyeball 24 mm across, with the cornea and rings of quads round the pupil |
| Stylised Head | A cartoon head: big cranium and eyes, small nose and jaw |
| Creature Head | A dragon or creature blockout: skull, jaw and two horns, each its own Part |
| Torso | A human torso from the neck to the upper thighs |
| Rounded Box, Cylinder, Capsule, Ring | Hard-surface primitives with bevelled edges and quad caps |
Every starter mesh is life size in centimetres, centred, standing on the ground and looking down +Z, and the symmetric ones are exactly symmetric, so X symmetry works from the first stroke. The Hand, Foot, Ear, Head, Bust and Torso are cut from a body, so they have open edges where they were cut.
A starter mesh opens with subdivision levels (two, or one for the Full Body): block out the big forms at Level 1, the base cage, and step up for the detail (see Geometry). It opens as a new, unsaved scene: Save asks for a name. Double-click a tile to open it; Shift+double-click appends its base cage as a Part, for example an Eye next to a head.
The human meshes come from the MakeHuman base mesh, which MakeHuman released into the public domain (CC0); the others are made by SculptForge's own build script. You may use them for anything, including commercial work.
The unsaved-changes prompt
When the scene has unsaved changes, New Sphere, New Plane, Open..., Open Recent, dropping a model or project, Quit (Ctrl+Q) and closing the window first ask:
- Save saves the project (asking for a name if it has none), then carries on;
- Don't Save discards the changes and carries on;
- Cancel goes back to your work.
Dropping an image or a .sfbrush file never asks, because it doesn't replace the scene.
Autosave and crash recovery
While the scene has unsaved changes, SculptForge writes a recovery copy every few minutes (every 5 minutes by default; it waits until you finish a stroke). Change the interval, or turn it off with 0, in Edit > Preferences > Autosave or with the Autosave (min) slider in the File palette (0 to 60 minutes).
The recovery copy is autosave.sfproj in the SculptForge settings folder (see
Troubleshooting for where that is on your system). It is deleted once your work is saved or
you discard the changes.
If SculptForge didn't close normally (a crash or power cut), the next start asks Restore Autosave?:
- Restore opens the autosaved scene as an untitled, unsaved document. Save it to keep it.
- Discard deletes the recovery copy.
The autosave also appears first in the Library Snapshots tab while it exists.
Note: Autosave is a safety net, not a substitute for saving. It keeps only the latest copy and is removed as soon as you save.
Snapshots
File > Save Snapshot (also the Snapshot button in the Classic layout's title strip) saves a timestamped copy of the whole scene (experienced sculptors: QuickSave). Your project file, its name and its unsaved state are not changed, so a snapshot is safe to take before any risky step.
- Copies go to the
QuickSavefolder of your library (by defaultDocuments/SculptForge/QuickSave), named likeSnapshot 2026-10-21 23-15-04.sfproj(olderQuickSave ...files are listed too). - The last 10 snapshots are kept; older ones are deleted.
- They appear in the Library Snapshots tab, newest first, labelled with their date and time. Double-click one to open it. The tab also has a Save now button.
With the Classic sculpting keys (Edit > Preferences > Input) 9 takes a snapshot; otherwise it has no default shortcut. To give it one, hold Ctrl+Alt, click the Snapshot button and press a key (see The interface).
Your library folder and the Library
SculptForge keeps a library folder for your work, by default SculptForge in your Documents folder. It is created
on first use with these sub-folders:
| Folder | Library tab | What goes there |
|---|---|---|
Projects |
Project | Your .sfproj files |
Tools |
Tool | Models to open or append as Parts |
Brushes |
Brush | .sfbrush files |
Alphas |
Alpha | Grayscale images for brush alphas |
LitSpheres |
Material | Lit Sphere images, loaded as materials at start-up |
Images |
Image | Sketches and concept art for Generate 3D |
Splats |
Splats | Gaussian splat captures |
QuickSave |
Snapshots | Snapshots |
Change it in Edit > Preferences > Library > Library folder; the setting saves itself.
Press , (comma) to show the Library. The tabs that matter for projects:
- Project: the projects in your
Projectsfolder, plus any recent project saved elsewhere. Each shows the thumbnail saved with it. - Snapshots: the autosave (when there is one) and your snapshots, newest first.
- Recent: everything in Open Recent, of every kind.
Double-click a tile to open it (you are asked about unsaved changes first). In the Tool tab, Shift+double-click a model to append it as a Part instead.

Scripting
| Command | What it does |
|---|---|
save_project path=work/dragon.sfproj |
Save the project (without path, to the current project) |
open_project path=work/dragon.sfproj |
Open a project (open also recognises .sfproj) |
open path=scan.obj |
Open a model, splat capture or project |
new_sphere subdivisions=6 / new_plane resolution=128 |
Start a new scene |
new_starter_mesh name=human-head |
Start from a starter mesh (levels=0 for the bare base cage) |
Projects saved by sculptforge-cli or Python open in the app too. For the file layout, see
docs/project-format.md.
See also
- The interface: Library, shortcuts and saving the layout
- Parts
- Exporting: formats for other applications
- Troubleshooting: where settings and the autosave live