Skip to content

Free, open-source 3D sculpting for Linux, macOS and Windows: dense meshes, remeshing, painting, built-in AI (image/text to 3D), Send to Unreal, game-ready LODs, Gaussian splats and OpenUSD.

20.2 KB
Raw Blame

Vertex Paint and materials

Vertex Paint (experienced sculptors: Vertex Paint) stores a colour on every vertex of the mesh, so you can paint a sculpt without UVs or textures. This chapter covers the Paint brush, painting while you sculpt, fills and cavity paint, picking colours, paint layers with blend modes, and the Lit Sphere materials that change how the model is shaded in the viewport.

How vertex paint works

  • Colour is stored per vertex. The detail you can paint is limited by how dense the mesh is: on a light mesh, colour edges look soft. Subdivide or remesh at a higher resolution before fine painting.
  • Painting respects the mask (masked areas keep their colour) and skips hidden faces.
  • Symmetry works for painting as it does for sculpting.
  • Vertex Paint is per Part and is saved in projects. It is exported as vertex colours to PLY, glTF/GLB, OBJ, USD (displayColor) and Bridge files. FBX export doesn't include it.
  • A mesh starts without vertex paint. The first paint stroke or fill adds it (white everywhere you haven't painted).

Texture painting: to paint finer than the mesh, give the Part a texture and paint into it instead; the Paint brush, fills and paint layers work the same way. Vertex Paint > Texture bakes vertex paint into a texture. See Texture painting.

Paint with the Paint brush

  1. Press P, click Paint on the top shelf, or pick Paint on the bottom shelf.
  2. Choose a colour (see below).
  3. Stroke over the model. Size, the stroke type and the alpha work as they do for sculpting; Colour intensity (I) sets how strongly the colour goes on.

While the Paint brush is active:

  • Alt paints back towards white.
  • Shift still smooths the shape.
  • The surface isn't changed.

Press P again, or click Sculpt on the top shelf, to go back to sculpting.

Vertex Paint on a sculpt with the Paint menu open

Paint while sculpting

Turn on Rgb on the top shelf (or RGB while sculpting in the Paint menu). Every sculpt brush then also paints the current colour along its stroke. The Smooth brush and Shift-smoothing never paint.

Choose a colour

  • The left shelf has a colour picker (a square plus a hue strip), two swatches and a Fill button. Clicking the second swatch swaps it with the main colour.
  • Under the two swatches, the recent colours are the last eight you painted with or filled with, newest first. Click one to paint with it again. They are kept when you restart.
  • The Paint menu has a larger hue wheel with a hex value, ten preset swatches (white, near black, red, orange, yellow, green, blue, purple, skin and brown) and the fill buttons.
  • Press C with the cursor over the model to pick the colour under it (the mesh needs vertex paint for this, or a texture while painting into the texture).

Fill, cavity paint and clear

The Paint menu has four buttons:

Button What it does
Fill Fills the unmasked area with the colour (the whole mesh when nothing is masked). Same as Fill on the left shelf
Fill masked Fills only the masked area. Available when the mesh has a mask
Cavity Darkens the creases and cavities with a dark brown, respecting the mask. A quick way to bring out detail
Clear Removes all vertex paint from the active Part

All of them are undoable. Show vertex paint in the same palette (or Paint on the right shelf) turns the colours off in the viewport without deleting them.

Tip: To paint a base colour and then dirt in the creases: Fill with the base colour, then Cavity. For a different cavity colour or strength, use the command (below).

Line Gradient

Line Gradient (under Clear) paints a straight colour ramp across the model as you see it: turn it on, then drag a line over the view. The paint colour at the start of the line runs into the End colour at its end; past the ends the two colours carry on. Tick Clear to fade the paint colour out instead, so the paint underneath shows through towards the end. The swap button swaps the two colours.

The line stays on screen with a handle at each end until you keep it: drag a handle, or change a colour, and the gradient is painted again in place of the last one. Enter keeps it (so does turning the view or any other edit), Esc takes it back. Each gradient is one undo step. It respects the mask like Fill, never paints hidden faces, and goes into the texture when the Part paints into one. With it on, Ctrl still masks and Shift still smooths; turn it off with its button or Esc.

Paint through a Stencil

A Stencil (Sculpt > Alpha > Stencil) paints too: load a photo or a pattern, place it over the model, and paint over it with the Paint brush. Where it covers the model the brush lays the image's colours (with your Colour intensity, falloff and mask); everywhere else it paints nothing. Turn off Paint its colours to paint the paint colour through the image's brightness instead (a grayscale pattern as a mask). Turn the model or move the stencil and paint again to cover a whole model.

Paint layers

Paint layers stack vertex paint the way Photoshop stacks image layers. Each layer has its own name, visibility, opacity and blend mode, so you can paint dirt on a Multiply layer, glow on a Screen layer or tint on an Overlay layer, then change or hide it later without repainting the rest. Every Part has its own stack.

Tool > Paint Layers: Base, a Multiply dirt layer, a Soft Light tint and an empty Normal layer

How paint layers work

  • Base is the bottom layer: the Part's vertex paint, always opaque. With only Base, vertex paint works exactly as it did before, and nothing changes in your files.
  • Layers above Base start transparent. Painting on a layer adds colour and coverage: where you haven't painted, the layer is see-through. Painting never touches the layers you aren't on.
  • What you see, and what every export writes, is the stack composited from Base up: each visible layer blends its colour over the result below with its blend mode, scaled by its coverage and opacity.
  • Blending happens on display colours, like Photoshop, so the modes behave as Photoshop users expect: 50% grey on an Overlay or Soft Light layer changes nothing, white on Multiply changes nothing, black on Screen changes nothing.
  • The Paint brush, Rgb while sculpting, Fill, Fill masked and Cavity all write into the active layer (highlighted in the list; the Paint menu shows "Painting on: ..."). They respect the mask and hidden faces on every layer.
  • With the Paint brush on a layer, Alt erases the layer's paint (on Base it paints back towards white, as before).
  • A hidden or locked layer can't be painted, filled or cleared; the status line says why.

Blend modes

Mode Effect
Normal The layer's colour covers what is below
Multiply Darkens: dirt, shadows, cavity grime. White does nothing
Screen Lightens: highlights, glow, dust. Black does nothing
Overlay Adds contrast and tints the midtones. 50% grey does nothing
Soft Light A gentler Overlay, good for skin tints and colour variation
Add Adds the colours (Photoshop's Linear Dodge); strong highlights
Subtract Subtracts the layer's colour
Darken / Lighten Keeps the darker / lighter colour, channel by channel
Difference The difference between the colours; useful for checking two paint passes against each other

The Paint Layers sub-palette

Open Tool > Paint Layers in the right tray (it sits under the sculpt Layers sub-palette). The list shows the layers top first, with Base at the bottom, like Photoshop's Layers panel. Each row has the name, the blend mode and opacity, a lock and an eye.

  • Click a row to paint on that layer. Double-click it to rename. Right-click for Rename, Duplicate, Merge down, Clear and Delete.
  • The eye shows or hides the layer; the lock protects it from painting, fills, clears and merges.
  • Under the list: the active layer's blend mode and Opacity slider. The opacity previews live while you drag and is one undo step when you let go.
  • New adds a transparent layer above the active one. Duplicate copies the active layer (Base becomes an opaque layer). Delete removes the active layer.
  • The arrows move the active layer up or down. Merge down merges it into the layer below (into Base for the lowest layer). Flatten bakes every visible layer into Base and removes the layers; hidden layers are discarded.
  • Clear layer makes the active layer transparent again (Base: white). Fill layer fills it with the current colour, like Fill in the Paint menu.

Hold Ctrl over any control for its description. Every action is undoable with Ctrl+Z.

Tip: Merging onto Base, and merging a layer onto a Normal layer it fully covers, keeps the look exactly. Merging a Multiply, Overlay or other blended layer onto a partly transparent layer can't always match, so the result takes the lower layer's blend mode, as in Photoshop.

Paint layers and sculpt layers

They are separate stacks. Tool > Layers holds sculpt layers: shape changes exported as blend shapes. Tool > Paint Layers holds colour. Selecting a sculpt layer doesn't change the paint layer you paint on, and the other way round, so a stroke with Rgb on can sculpt into the "Smile" layer and paint into the "Blush" layer at once.

Files, Parts and geometry

  • Paint layers are saved in projects (.sfproj) with their names, blend modes, opacity, visibility, lock and the active layer. Older versions of SculptForge open these projects with the paint flattened.
  • Exports (OBJ, PLY, glTF/GLB, USD, Bridge) write the composited colours, exactly what the viewport shows.
  • Duplicating a Part copies its layers, and Split keeps them on each piece. Subdividing and decimating keep them too.
  • Merging Parts, a voxel remesh and other rebuilds keep the look but flatten the layers into Base.

Materials (Lit Spheres)

The materials are material capture (lit sphere) images: each one is a picture of a lit sphere that shades the whole model. They change only how the model is shaded in the viewport. They aren't exported and don't change vertex paint.

Material Look
Soft Clay The default: a matte warm light grey with a clear light and shadow side and a soft rim
Sculpt Made for sculpting: neutral warm clay under a strong key light from the upper left, a crisp highlight and deep cavity shading, so small strokes and undulations stay readable
Red Wax Glossy deep red wax, the classic sculpting look
Clay Matte grey-brown clay
Skin Warm, soft skin tones
Chrome Mirror-like metal, good for checking surface flow
White Neutral off-white for judging forms
Bronze Polished bronze
Studio Softer clay shading with studio lighting (the default in earlier versions). Its colour is Base colour in Render > Materials

To choose one:

  • Press M for the material picker under the cursor, or click the Material tile on the left shelf. Point at a material to preview it on the model, click to keep it. Esc or clicking away puts the previous material back.
  • Open Render > Materials, or the Material tab of the Library.

The material picker with the built-in Lit Spheres and Studio

Vertex Paint multiplies the material, and cavity shading stays on with every material (strongest with Sculpt). The material is saved with the project: projects saved with Studio open with Studio.

Colour tints the material (in the Paint menu, on by default): on a Part with no vertex paint yet, the current colour tints its Lit Sphere material, so you can try a skin, stone or bronze tone without painting anything. The colour's hue and saturation tint it; grey (the starting colour) and black leave the material as it is, and the material keeps its own light and shade. Once a Part has vertex paint, the paint shows instead. PBR shading uses the material channels and is not tinted. Saved with the project.

Tip: Sculpt is the material to judge strokes with. The prettier ones (Skin, Red Wax) soften small detail; switch to them for presenting.

Your own Lit Spheres

Your own Lit Spheres are material capture (lit sphere) images too (Sloan and others, 2001): the view colours each point of the model with the sphere's colour where its surface faces the same way. Any lit-sphere image works: a square PNG, JPG or EXR with the sphere filling it (a non-square image is cropped to its centre; big ones are scaled to 1024 pixels).

  • Render > Materials > Load Lit Sphere... picks an image. It joins the material list under its file name, the view uses it, and a copy goes into the Lit Spheres folder of your library (Documents/SculptForge/Lit Spheres, or the folder set in Edit > Preferences > Library), so it is there next time.
  • Or put images into that Lit Spheres folder yourself: they show up the next time you open the material picker, Render > Materials or the Library's Material tab, no restart needed. Studios can share a read-only folder by listing it in the SCULPTFORGE_LITSPHERE_PATH environment variable (separated by :, ; on Windows); those load when SculptForge starts.
  • Drop an image onto the Library's Material tab to load it the same way (dropped on the canvas, an image keeps its usual meaning).
  • Rename one: right-click it in the material picker, Render > Materials or the Library's Material tab and choose Rename..., type the name and press Enter. Its file in the Lit Spheres folder is renamed too. A name another Lit Sphere already has is refused, so nothing is overwritten. Projects that use it keep their look: they find it by its pixels, not its name.
  • Organise them in folders: each sub-folder of the Lit Spheres folder (one level) is a heading in the lists. Right-click a Lit Sphere and choose Move to folder for an existing folder, New folder... to make one, or Lit Spheres (no folder) to take it out again. You can also make the folders in your file manager.
  • Lit Spheres from a pack, from a studio folder or carried only by the open project have no file of yours to change: Rename and Move to folder are greyed out, and pointing at them says why.
  • To remove one, right-click it and choose Remove. An image from your Lit Spheres folder goes to the trash (the Recycle Bin on Windows), so you can still get it back. On macOS it is only hidden until you restart, and the message says where its file is so you can delete it yourself. Built-in materials can't be removed.

A Lit Sphere loaded from an image (Gold) in Render > Materials

Right-click a Lit Sphere for Rename... and Move to folder; the Metals folder is a heading in the list

Your Lit Spheres appear in the material picker (M), Render > Materials and the Library, after the built-in ones, those in folders under their folder's name. A project that uses one carries a copy of the image, so it opens with the same look on another computer (or after you delete the file). Loading an image with the same name again replaces it. EXR images are read as linear light, so very bright highlights clip to white.

Smooth and flat shading

Smooth shading (the default) blends the light across polygons, so the surface reads as one form. Flat shading lights every polygon on its own, so you see the faces: how the mesh is built, where its vertices sit, and exactly what a stroke, crease or pinch did to the geometry, without smooth blending hiding small lumps. It helps most when blocking out forms on a low-poly base mesh.

  • Render > Materials > Shading: Smooth | Flat for the whole scene. The same buttons are in Tool > Display.
  • This Part: Scene (the default) follows the scene's shading; Smooth or Flat keeps the active Part that way whatever the scene says, for example a flat body with smooth eyes.

Smooth and Flat shading on the template head, with its eyes kept smooth

Shading works with every material, vertex paint, textures and the mask. Like the material, it only changes the view: exports are unaffected. Projects save the scene's shading and each Part's own; projects from before open with your preferred shading. The scene's shading you choose is also the preference for the next session (it saves itself). Smooth and Flat have no default shortcut, so no classic key changes meaning; assign one under Edit > Preferences > Hotkeys if you switch often.

Scripting

Command What it does
set_color color=#c08060 Set the paint colour: rrggbb, #rrggbb (quote it in scripts), r,g,b or a name such as white, skin, bone
paint_fill area=unmasked Fill; area is unmasked (default), masked or all; strength 0-1
paint_gradient x0=-1 y0=0 x1=1 y1=0 to=clear Line Gradient from the paint colour (or color) at the start to to (a colour, or clear) at the end; the line in -1..1 view coordinates (view_proj, default the front view); area as paint_fill
paint_from_cavity color=#202020 strength=0.7 smoothing=2 Cavity paint (defaults: dark brown, 0.7, 2 blur passes)
paint_clear Remove all vertex paint, paint layers included
paint_layer_add name=Dirt blend=multiply opacity=0.8 Add a paint layer above the active one and paint on it
paint_layer_set index=0 opacity=0.5 blend=overlay visible=false locked=true name=Grime Change a layer (layer=Dirt picks it by name; default: the active layer)
paint_layer_select layer=Base Paint on another layer (index=-1 is Base, 0 the first layer above it)
paint_layer_duplicate, paint_layer_delete, paint_layer_clear Copy, delete or clear the active (or given) layer
paint_layer_move direction=up Move a layer up or down the stack
paint_layer_merge / paint_layer_flatten Merge down / bake every visible layer into Base
paint_layer_list List the layers, top first (* marks the active one)
set_material name=Chrome Viewport material: a Lit Sphere name (Soft Clay is the default, your own Lit Spheres included) or studio (desktop app only)
load_litsphere path=gold.png Load a Lit Sphere image and use it; keep=false doesn't copy it into the Lit Spheres folder (desktop app only)
rename_litsphere name=Gold to="Old Gold" Rename one of your Lit Spheres and its image in the Lit Spheres folder; a name in use is refused (desktop app only)
move_litsphere name=Gold folder=Metals Move one of your Lit Spheres into a sub-folder of the Lit Spheres folder (made if needed; folder="" moves it back) (desktop app only)
remove_litsphere name=Gold Remove one of your Lit Spheres; its image in the Lit Spheres folder goes to the trash (desktop app only)
set_background mode=flat color=60,70,80 The view's background: gradient (the default) or flat with a colour (#rrggbb, r,g,b or a name); see The background (desktop app only)
set_shading mode=flat The scene's shading: smooth (the default) or flat (desktop app only)
part_shading mode=smooth name=Eyes A Part's own shading: default (follow the scene), smooth or flat; index or name picks the Part (default: the active one)
set_color color="#d9b38c"; paint_fill; paint_from_cavity strength=0.5
paint_layer_add name=Dirt blend=multiply opacity=0.8; paint_from_cavity color=4a2c18 strength=0.9

See also