Skip to content

Free, open-source 3D sculpting for Linux, macOS and Windows: dense meshes, remeshing, painting, built-in AI (image/text to 3D), Send to Unreal, game-ready LODs, Gaussian splats and OpenUSD.

Merge feat/first-sculpt (0.10.9)

islandmed8e56b8f1619d
diff --cc CHANGELOG.md
index 1d20637e,665ca92f..c900493a
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@@ -7,54 -7,16 +7,63 @@@ All notable changes to SculptForge are
## [Unreleased]
### Added
+- Alpha options in the Alpha palette (#76, requested by rodrigomoretto): **Follow stroke direction** turns the alpha
+ along the stroke with Blender's Rake smoothing (the direction is taken again every 20 pixels), **Angle** and **Angle
+ jitter** turn it by a fixed or a random amount per dab, and **Tile across / down** repeat it 1 to 8 times inside
+ the brush. They work with custom and Community brushes, are kept per brush, and the preview shows the tiling.
+ Scripts: `brush_alpha_options`.
+- **View > Lock camera** (Shift+L, the same switch as Preferences > Input > Start strokes off the model) and a
+ **CAMERA LOCKED** chip in the status bar while it is on (#62 follow-up).
+- Blender style: **Preferences > Input > Emulate 3 Button Mouse** (off by default): Alt+left-drag turns the view
+ everywhere, as before.
+- Each brush keeps its own settings (#78, requested by dCo3lh0 and on Discord): Draw Size, Z Intensity, Falloff, RGB
+ Intensity, the stroke (with Spray's scatter and Lazy Stroke's radius) and the alpha follow the brush, custom and
+ Community brushes included. Switching back brings back the values that brush had this session; a brush not used yet
+ starts from the current values. **Brush > Save Brush Settings** keeps them for every start (`brush-settings.json`
+ in the user data folder), **Brush > Reset Brush to Default** restores the shipped values, and **Preferences >
+ Input > Share size and intensity across brushes** (off by default) keeps Draw Size and Z Intensity shared as before.
+- **Gizmo size** (Draw > Camera): the corner axes come in Small, Medium (as before, the default) and Large, on top
+ of the UI scale; clicking an end still snaps to that side at every size. Saved in the preferences.
+- **View Figure** (Draw > Camera, beside Axes, off by default): a small shaded head in the canvas corner that turns
+ with the camera; click it to snap to the nearest side view. Requested on Discord.
+- Starter meshes (Discord #ideas): a human head with eye and mouth loops, a bust, a full body in A-pose, a hand, a
+ foot, an ear, an eye, a stylised head, a creature head blockout (skull, jaw and horns as Parts), a torso, and
+ bevelled rounded box, cylinder, capsule and ring primitives. All quads, centimetres, centred, standing on the
+ ground and symmetric where they should be; they open with subdivision levels over a small base cage (the whole
+ set adds 0.8 MB). **File > New from Starter Mesh**, a **Starter meshes** folder with thumbnails in Library > Tool,
+ **Start from a head** in the welcome, and `new_starter_mesh` for scripts. The human meshes are cut from the
+ MakeHuman base mesh (CC0); the rest are generated by `tools/starter/build_starter_meshes.py`
+ (docs/starter-meshes.md).
+ - "Your first sculpt in 10 minutes" (docs/guide/first-sculpt.md): a twelve-step lesson for complete beginners that
+ turns the default sphere into a mushroom house: masked Move strokes for the walls and an overhanging cap, colour
+ filled through the mask, Divide twice, a door and framed windows carved with Crease and Clay, raised spots
+ painted with a hard-edged Paint brush, PBR shading and a saved render. The welcome has a big **Start the 10-minute
+ lesson** button, and **Help > Your first sculpt (10 min)** opens it. Its screenshots come from
+ tests/ui/first_sculpt.sfui, which ctest runs so the lesson keeps working. The website links it from the homepage
+ and the guide index.
+ - **Render > Materials > Save Render**: the view without the interface at twice its size, saved as a PNG in the
+ library's Images folder (Library > Image).
+### Fixed
+- Blender style: Alt+left-drag on the model masks and Ctrl+Alt+left-drag unmasks, as Blender 5.1+'s default
+ sculpt keymap does, instead of turning the view (#77, reported by TheRedWaxPolice). Beside the model Alt+drag still
+ turns the view, and Alt+Shift+drag pans anywhere. Shift+F (Strength) sets the brush's Intensity instead of Smooth's.
+- UI test runs remove their temporary settings folder when they pass (thousands of runs had filled `/tmp`).
+- Tablets (a Wacom Intuos 3 report): a tablet plugged in after launch works without a restart ("Tablet connected" /
+ "Tablet disconnected" in the status bar), also through Wacom Bridge; on Windows, pressure now also comes from the
+ Wacom driver with "Use Windows Ink" off (Wintab); a pen without pressure draws at full strength instead of not at
+ all, and Preferences > Input and > Tablet say "Pressure: on" or "not detected" with a troubleshooting link. The
+ view no longer jumps when the pen comes back into range elsewhere or leaves mid-drag. The active Part changes only
+ with the keyboard's Alt and a quick click (not with a pen button set to Alt, a long pen press or quick pen taps),
+ and the status bar says "Active Part: <name> (Alt+click)".
+
+## [0.10.8] - 2026-11-02
+
+### Fixed
+- Tablet Mouse mode (Preferences > Tablet): on some Windows tablets the brush stopped following the pen in 0.10.7,
+ because the system cursor reading stayed put while the pen moved. A reading that doesn't move with the pen is now
+ ignored and the pen moves the brush relatively, from where it was, with no jump (#72).
+
## [0.10.7] - 2026-11-01
### Changed
diff --cc docs/guide/whats-new.md
index 3f1a6093,a03893fa..6f37b9a3
--- a/docs/guide/whats-new.md
+++ b/docs/guide/whats-new.md
@@@ -5,42 -5,16 +5,49 @@@ chapter opens by itself the first time
**Help > What's New**. Every detail is in the
[changelog](https://github.com/islandmed/SculptForge/blob/main/CHANGELOG.md).
-## Version 0.10.8
+## Version 0.10.9
+- **Each brush keeps its own settings**: Draw Size, Intensity, Falloff, RGB Intensity, stroke and alpha follow
+ the brush, custom and Community brushes included. **Brush > Save Brush Settings** keeps them for the next start,
+ **Reset Brush to Default** puts back the shipped values, and **Preferences > Input > Share size and intensity
+ across brushes** keeps the old way (#78). See [Sculpting](sculpting.md#each-brush-keeps-its-own-settings).
+- **Alpha options** (**Alpha** palette): **Follow stroke direction** turns the alpha along the stroke, smoothed as
+ Blender's Rake does; **Angle** and **Angle jitter** turn it by a fixed or a random amount; **Tile** repeats it
+ inside the brush. They work with custom and Community brushes too, and each brush keeps its own (#76). See
+ [Alpha options](sculpting.md#alpha-options).
+- **Blender style: Alt+drag masks** on the model and Ctrl+Alt+drag unmasks, as in Blender 5.1 and later; beside the
+ model Alt+drag still turns the view. **Preferences > Input > Emulate 3 Button Mouse** makes Alt+drag turn the view
+ everywhere. Shift+F now sets the brush's Intensity, not Smooth's (#77).
+- **View > Lock camera** (<kbd>Shift</kbd>+<kbd>L</kbd>): drags that start beside the model sculpt instead of
+ turning the view, and the status bar shows **CAMERA LOCKED** while it is on (#62).
+- **Tablets**: plug a tablet in while SculptForge runs and it just works ("Tablet connected" in the status bar),
+ also through Wacom Bridge. On Windows, pressure works with the Wacom driver's **Use Windows Ink** on or off.
+ **Preferences > Input** shows whether pressure is detected, with a troubleshooting link. The view no longer jumps
+ when the pen comes back into range, and the active Part changes only with **Alt+click** on the keyboard; the
+ status bar names the new Part. See [Troubleshooting](troubleshooting.md#pen-tablets).
+- **Smaller (or larger) corner axes**: **Draw > Camera > Gizmo size** sets Small, Medium or Large
+ ([Navigation](navigation.md)).
+- **View Figure**: turn it on beside **Axes** for a small head in the corner that turns with the view; click it to
+ snap to the nearest side.
+- **Starter meshes**: start a sculpt from a human head with eye and mouth loops, a bust, a full body in A-pose, a
+ hand, a foot, an ear, an eye, a stylised head, a creature head, a torso, or a bevelled box, cylinder, capsule or
+ ring, all clean quads at life size with subdivision levels ready. **File > New from Starter Mesh**, the Library's
+ **Tool > Starter meshes**, or **Start from a head** in the welcome. See
+ [Projects](projects.md#start-from-a-starter-mesh).
+ - **Your first sculpt in 10 minutes**: a step-by-step lesson for people who have never sculpted. Turn the
+ default sphere into a little mushroom house with a spotted red cap, a door and glowing windows, using masks,
+ Move, Inflate, Crease and Clay, Vertex Paint and PBR shading, and save a render to share. Start it from the
+ welcome's **Start the 10-minute lesson** button or **Help > Your first sculpt (10 min)**. See
+ [Your first sculpt](first-sculpt.md).
+ - **Save Render** (**Render > Materials**): the view without the interface, at twice its size, as a PNG in your
+ Library (**Library > Image**).
+## Version 0.10.8
+
+- **Tablets in mouse mode work again**: on some Windows tablets with **Mouse mode** on (Preferences > Tablet) the
+ brush stopped following the pen in 0.10.7. When the system can't say where its cursor is, the pen now moves the
+ brush by how far it moves, from where it was (#72).
+
## Version 0.10.7
- **A clearer membership card**: the three memberships side by side with what each one gets you, in your look's
diff --cc website/index.html
index 96ed4b05,0afa1d9b..fddaef05
--- a/website/index.html
+++ b/website/index.html
@@@ -17,10 -17,10 +17,10 @@@
<meta property="og:url" content="https://sculptforge.app/">
<link rel="canonical" href="https://sculptforge.app/">
<script type="application/ld+json">
- {"@context": "https://schema.org", "@type": "SoftwareApplication", "name": "SculptForge", "url": "https://sculptforge.app/", "applicationCategory": "MultimediaApplication", "applicationSubCategory": "3D sculpting", "operatingSystem": "Windows 10, Windows 11, macOS, Linux", "softwareVersion": "0.10.6", "description": "Free, open-source digital sculpting: an alternative to ZBrush and Mudbox for VFX, animation and game studios.", "license": "https://www.gnu.org/licenses/gpl-3.0.html", "isAccessibleForFree": true, "offers": {"@type": "Offer", "price": "0", "priceCurrency": "USD"}, "downloadUrl": "https://github.com/islandmed/SculptForge/releases/latest", "image": "https://sculptforge.app/img/social-preview.png?v=3", "sameAs": ["https://github.com/islandmed/SculptForge"]}
+ {"@context": "https://schema.org", "@type": "SoftwareApplication", "name": "SculptForge", "url": "https://sculptforge.app/", "applicationCategory": "MultimediaApplication", "applicationSubCategory": "3D sculpting", "operatingSystem": "Windows 10, Windows 11, macOS, Linux", "softwareVersion": "0.10.8", "description": "Free, open-source digital sculpting: an alternative to ZBrush and Mudbox for VFX, animation and game studios.", "license": "https://www.gnu.org/licenses/gpl-3.0.html", "isAccessibleForFree": true, "offers": {"@type": "Offer", "price": "0", "priceCurrency": "USD"}, "downloadUrl": "https://github.com/islandmed/SculptForge/releases/latest", "image": "https://sculptforge.app/img/social-preview.png?v=3", "sameAs": ["https://github.com/islandmed/SculptForge"]}
</script>
<meta name="twitter:card" content="summary_large_image">
- <link rel="stylesheet" href="style.css?v=18">
+ <link rel="stylesheet" href="style.css?v=19">
<script src="motion.js?v=11" defer></script>
<script data-goatcounter="https://sculptforge.goatcounter.com/count" async src="https://gc.zgo.at/count.js"></script>
</head>