Skip to content

Free, open-source 3D sculpting for Linux, macOS and Windows: dense meshes, remeshing, painting, built-in AI (image/text to 3D), Send to Unreal, game-ready LODs, Gaussian splats and OpenUSD.

Merge feat/ai-switch (0.10.9): AI off switch

islandmed92bdedd93923
diff --cc CHANGELOG.md
index c6867c20,c6535486..d479b11c
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@@ -113,32 -85,11 +113,37 @@@ All notable changes to SculptForge are
view no longer jumps when the pen comes back into range elsewhere or leaves mid-drag. The active Part changes only
with the keyboard's Alt and a quick click (not with a pen button set to Alt, a long pen press or quick pen taps),
and the status bar says "Active Part: <name> (Alt+click)".
+- The enlarged brush or alpha thumbnail you point at in a picker is drawn over its neighbours again, not
+ under them (#86, thanks tristratos).
+- The enlarged brush or alpha thumbnail you point at in a picker is drawn over its neighbours again, not
+ under them (#86, thanks tristratos).
+- The brush centre now sits exactly under the cursor at high zoom and on HiDPI screens: the brush's ray is worked
+ out from the camera directly, and the view is drawn on whole pixels where the rays are cast (it could be up to
+ half a pixel off). The surface point under the brush is lightly filtered, so strokes on dense meshes no longer
+ wobble.
+- Preferences > Interface > UI scale applies at once: text, controls and panels resize live, no restart (#87).
+ Before, the choice waited for the next start and was lost unless Store Config saved it. Automatic now follows
+ the monitor the window is on: on Windows (per-monitor DPI v2, now declared in the app's manifest) dragging the
+ window between a 100 % and a 150 % monitor, or changing Settings > Display > Scale, rescales the UI right away.
+- The pen picks a brush, then stops clicking the panels and the canvas until the mouse is used (#95; Huion Kamvas,
+ display tablets, Wacom with Windows Ink on or off): SDL 3.2 keeps one "a pen is touching" flag for all pens, and
+ once Windows took a pen away while it touched (a drag capturing the mouse), it made no mouse events for any pen
+ again. SculptForge now makes the pen tip's mouse events from the pen's own and ignores SDL's, lets go of the
+ button whenever the pen leaves, and ignores the mouse presses some drivers (Huion) send beside the pen's, whose
+ release may never come. A replay test covers Windows Ink, a Huion-style pen + mouse stream, SDL's stuck state and
+ Wintab-style input.
+- Tablet Mouse mode (#72, 0.10.8): it followed the system cursor, which with the tablet driver in pen mode is where
+ the pen is, so it felt the same as Pen mode. Now only the pen's movement moves the cursor, with no jump when the
+ pen comes back elsewhere, and while the pen is in range the arrow is drawn at the brush (the system's, at the
+ pen's place on the tablet, is hidden), so arrow, brush and clicks agree.
+- With two screens, moving the pointer to the other screen made SculptForge draw as if it were in the background
+ until the pointer came back (Windows 11). It now keeps drawing after any input while its window has focus,
+ wherever the pointer is, and rests only when it loses focus.
+ - Turn AI off: **Preferences > AI > Enable AI features** (also asked in the first-run welcome). Off hides AI Brush,
+ Generate 3D and their menu, shelf and command palette entries, removes the AI commands from scripts, the CLI and
+ the MCP tool list, and stops every AI network call; the MCP server and the offline Relief / Inflate / Stamp stay.
+ Saved at once. Studios: `SF_AI=off` (or `--no-ai`) turns it off and locks it. About and the website now say:
+ "Your art is never uploaded or used for training. AI features run only when you use them and can be turned off."
## [0.10.8] - 2026-11-02
diff --cc docs/guide/interface.md
index 2f26d5e6,b388ecb7..524a62d6
--- a/docs/guide/interface.md
+++ b/docs/guide/interface.md
@@@ -76,11 -63,25 +76,25 @@@ ZBrush-style layout again right after.
[Store Config](#store-config-and-friends) (Store Config keeps them in your UI configuration too).
**Updating from an older version** keeps the look and layout you had. A card, **SculptForge has a new look**,
-shows once: **Try it** switches to Forge Terminal with Tokyo Night and the SculptForge layout; **Keep my layout**
+shows once: **Try it** switches to Forge Terminal with the Neutral colours and the SculptForge layout; **Keep my layout**
changes nothing. Either way, Preferences > Interface > Look changes it later.
-In scripts: `ui_look look=forge scheme=tokyo_night layout=sculptforge` (or `look=classic layout=zbrush`).
+In scripts: `ui_look look=forge scheme=neutral outlines=subtle layout=sculptforge` (or `look=classic layout=zbrush`).
+ ## Turning AI off
+
+ Your art is never uploaded or used for training. AI features run only when you use them and can be turned off.
+
+ **Preferences > AI > Enable AI features** turns off everything AI: **AI Brush** (Brush Lab, where you describe a
+ brush in words) and **Generate 3D** (image or text to a model) leave the shelves, menus and the command palette,
+ their commands leave scripts, `sculptforge-cli` and the MCP tool list, and SculptForge makes no AI network calls.
+ The offline image tools (**Relief**, **Inflate**, **Stamp**) and the MCP server stay. The first-run welcome asks
+ the same question. The choice is saved at once; turn it back on the same way, or search the command palette for
+ "Enable AI".
+
+ Studios can turn it off for everyone with the environment variable `SF_AI=off` (or start with `--no-ai`); the
+ setting is then locked. See [Studios](studios.md#environment-variables).
+
## The title strip
From left to right:
diff --cc docs/guide/whats-new.md
index 74f9fe10,bcb925be..078f74be
--- a/docs/guide/whats-new.md
+++ b/docs/guide/whats-new.md
@@@ -79,35 -79,9 +79,38 @@@ action: guide:whats-new.m
and the status line tells you. Your own model choice is kept. See [Image and text to 3D](generate-3d.md).
- **Generated models arrive as clean quads**: Quad Remesh is now the default, with one subdivision level holding
the detail, so you can sculpt and subdivide straight away. Voxel remesh and Off are still in **Remesh**.
+- **Hover highlights that pop**: buttons, menus and shelves light up in your look's accent as you point at them,
+ tiles lift a little, sliders show their exact value, and the keyboard focus gets the same ring. Prefer less
+ movement? Turn on **Preferences > Interface > Reduce motion** ([Interface](interface.md)).
+- **Picker thumbnails on top**: the enlarged thumbnail you point at in a picker is no longer hidden under its
+ neighbours (#86).
+- **Hover highlights that pop**: buttons, menus and shelves light up in your look's accent as you point at them,
+ tiles lift a little, sliders show their exact value, and the keyboard focus gets the same ring. Prefer less
+ movement? Turn on **Preferences > Interface > Reduce motion** ([Interface](interface.md)).
+- **Picker thumbnails on top**: the enlarged thumbnail you point at in a picker is no longer hidden under its
+ neighbours (#86).
+- **Focus Detail (experimental)**: sculpt a head of a billion micro triangles from one compressed file. Detail
+ loads where you look and where the brush is heading, and the rest shows a lighter version. Saving writes only
+ what you changed. Try it with `sculptforge --benchmark standard-1b` (Linux and macOS for now).
+- **Precision work** for pores, wrinkles, jewellery and trims: **Steady Stroke** (<kbd>L</kbd>) with every stroke
+ type and a catch-up on release; **World Size**, so the brush keeps its size in mm on the surface as you zoom;
+ Draw Size down to 0.5 px with <kbd>Shift</kbd>+<kbd>[</kbd> / <kbd>]</kbd> for 1 px steps; hold
+ <kbd>Shift</kbd>+<kbd>Alt</kbd> while drawing to move the brush at a quarter of the pen's speed; and a pressure
+ curve for each brush with a **Fine detail** preset. The brush centre now sits exactly under the cursor at any
+ zoom. See [Precision work](sculpting.md#precision-work).
+- **UI scale works live**: **Preferences > Interface > UI scale** (100% to 200%) resizes text and panels at once,
+ no restart. **Automatic** follows the monitor the window is on, so on Windows moving it between a 100% and a
+ 150% monitor rescales it right away (#87). See [The interface](interface.md#interface-preferences).
+- **The pen keeps working the panels**: with some tablets (Huion, pen displays, Wacom with Windows Ink on or off)
+ the pen picked one brush, then stopped clicking menus and the canvas until you used the mouse. SculptForge now
+ makes the pen's clicks itself (#95). See [Troubleshooting](troubleshooting.md#pen-tablets).
+- **Mouse mode is relative again**: with **Mouse mode** on (Preferences > Tablet) the pen moves the cursor by how
+ far it moves, whatever the driver's mode, and the arrow is drawn right at the brush (#72).
+- **Two screens**: SculptForge no longer slows down when the pointer is on your other screen; it rests only when
+ its window loses focus.
+ - **Turn AI off**: **Preferences > AI > Enable AI features** (the welcome asks too). Off hides AI Brush and
+ Generate 3D everywhere and SculptForge makes no AI network calls. Your art is never uploaded or used for training. AI features run only when you use them and can be turned off. Studios can set `SF_AI=off`.
+ See [The interface](interface.md#turning-ai-off).
## Version 0.10.8
diff --cc src/app/UiTest.cpp
index 12ccff7e,3a30f43c..0e463958
--- a/src/app/UiTest.cpp
+++ b/src/app/UiTest.cpp
@@@ -226,12 -203,9 +226,13 @@@
// spacemouse_button N press and release button N (1 = left side button, 2 = right)
// spacemouse_unplug unplug it
// expect_value spacemouse_connected (1 when the app opened it), spacemouse_moving (1 while it moves the view)
+// ui_scale PERCENT | auto Preferences > Interface > UI scale (applied live, #87); display_scale PERCENT: the display's
+// content scale changes, with SDL's event (Windows DPI, another monitor)
+// expect_value ui_scale (percent built now), font_height (default font, px), frame_height, panel_width (right
+// shelf, px), title_height
// expect_value look (0 Classic, 1 Forge Terminal, 2 Phosphor, 3 Blueprint), shell_layout (0 ZBrush-style, 1 SculptForge)
#include "app/App.h"
+ #include "ai/Http.h"
#ifndef SDL_PEN_INPUT_IN_PROXIMITY
#define SDL_PEN_INPUT_IN_PROXIMITY (1u << 31) // SDL 3.4's flag; older SDL 3 never sets it
diff --cc src/app/main.cpp
index f4e6a011,59c86c83..0d7174a2
--- a/src/app/main.cpp
+++ b/src/app/main.cpp
@@@ -4,7 -4,7 +4,8 @@@
#include "app/Bench.h"
#include "app/Calibration.h"
#include "app/CrashLog.h"
+ #include "ai/AiPolicy.h"
+#include "core/FocusDetail.h"
#include "core/Pack.h"
#include <SDL3/SDL_main.h>