Free, open-source 3D sculpting for Linux, macOS and Windows: dense meshes, remeshing, painting, built-in AI (image/text to 3D), Send to Unreal, game-ready LODs, Gaussian splats and OpenUSD.
C++ 3d3d-sculptingcppdear-imguidigital-sculptingfbxgame-developmentgaussian-splattinggltfimage-to-3dmcpopenglopenusdsculptingtext-to-3dunreal-engine
Merge main a9afe956 (batch 4) into feat/zh-hans: SC embed beside the new icon lines, batch 4 labels, SC font re-subset
islandmed9d43a9b363bd
diff --cc CMakeLists.txtindex 6604edf2,55d93b04..bf195171--- a/CMakeLists.txt+++ b/CMakeLists.txt@@@ -354,9 -354,9 +354,10 @@@ if(SCULPTFORGE_BUILD_APPfontMono ${CMAKE_CURRENT_SOURCE_DIR}/assets/fonts/JetBrainsMono-Regular.ttf # the looks (Preferences > Interface > Look)fontMonoBold ${CMAKE_CURRENT_SOURCE_DIR}/assets/fonts/JetBrainsMono-SemiBold.ttffontCjk ${CMAKE_CURRENT_SOURCE_DIR}/assets/fonts/NotoSansTC-UI.otf # Traditional Chinese (tools/i18n/subset_cjk_font.py)+ fontCjkSc ${CMAKE_CURRENT_SOURCE_DIR}/assets/fonts/NotoSansSC-UI.otf # Simplified Chinese (the same tool)- appIcon ${CMAKE_CURRENT_SOURCE_DIR}/assets/branding/sculptforge-256.png # the window icon and the in-app mark (BrandMark.cpp)- appIconSmall ${CMAKE_CURRENT_SOURCE_DIR}/assets/branding/sculptforge-small-64.png # the mark below 48 px+ appIcon ${CMAKE_CURRENT_SOURCE_DIR}/assets/branding/sculptforge-256.png # the SF app icon: window, title bar (BrandMark.cpp)+ appIconSmall ${CMAKE_CURRENT_SOURCE_DIR}/assets/branding/sculptforge-32.png # its small cut (up to 32 px)+ bustMark ${CMAKE_CURRENT_SOURCE_DIR}/assets/branding/bust/bust-256.png # the illustration: About, What's New, support cardsupporters ${CMAKE_CURRENT_SOURCE_DIR}/docs/supporters.txt # Help > About (never empty: it starts with comments)foundingMembers ${CMAKE_CURRENT_SOURCE_DIR}/website/founding.json) # Help > About and the membership cardinclude(cmake/EmbedGuide.cmake)diff --cc assets/fonts/NotoSansSC-UI.otfindex 96f0d600,00000000..a6db10cdmode 100644,000000..100644Binary files differdiff --cc src/app/I18nSimplifiedChinese.cppindex 63e176ce,00000000..c71c2e37mode 100644,000000..100644--- a/src/app/I18nSimplifiedChinese.cpp+++ b/src/app/I18nSimplifiedChinese.cpp@@@ -1,3195 -1,0 +1,3195 @@@+// SculptForge - open source digital sculpting+// SPDX-License-Identifier: GPL-3.0-or-later+//+// The Simplified Chinese interface: the Traditional Chinese table (I18nTraditionalChinese.cpp, by yoyomaimai, GitHub+// #114) converted to simplified characters with phrase mapping and reviewed for mainland usage. The English text is+// the key (I18n.h); a label without an entry stays in English.+//+// Conventions (mainland usage, as in mainland 3D software):+// - Names of tools, brushes and products stay in English: Quad Remesh, Forge Spheres, Lit Sphere, Splats, Clay Block+// and every other brush, VDM, Alpha. Generic words are translated: 部件 (Part), 资源库 (Library), 顶点绘制+// (Vertex Paint), 面组 (Face Groups), 工具栏 (shelf), 工具箱 (tray), 调色板 (palette), 笔触 (stroke),+// 默认 (default) and 预设 (preset), 撤销 (undo), 行/列 (rows/columns), 视图 (view), 文件 (file), 设置 (settings).+// - A space between Chinese and Latin text or numbers (添加 VDM 平面), full-width punctuation (,。:()) and “” quotes,+// except right after a printf conversion or a literal %, where ASCII punctuation keeps the conversions the same.+// - printf conversions (%d, %.1f, %s, %%) stay in the same order: tests check every entry.+// - Every character has to be in assets/fonts/NotoSansSC-UI.otf: after changing this table, run+// tools/i18n/subset_cjk_font.py (a test lists what is missing).+// The entries follow the Traditional table's order and groups, one entry per English text.+#include "app/I18n.h"++#include <iterator>++namespace sf::i18n {++namespace {++constexpr Entry kSimplifiedChinese[] = {+ // --- Palettes (the palette bar) and their sub-palettes ---+ {"Alpha", "Alpha"},+ {"Brush", "笔刷"},+ {"Color", "色彩"},+ {"Draw", "绘制"},+ {"Edit", "编辑"},+ {"File", "文件"},+ {"Generate", "生成"},+ {"Help", "帮助"},+ {"Material", "材质"},+ {"Preferences", "偏好设置"},+ {"Render", "渲染"},+ {"Script", "脚本"},+ {"Splats", "Splats"},+ {"Stroke", "笔触"},+ {"Tool", "工具"},+ {"Transform", "变形"},+ // The SculptForge layout's task menus and their sections (Palettes.cpp taskMenus), Preferences > Interface > Look.+ {"Mesh", "网格"},+ {"View", "视图"},+ {"Draw & Tablet", "绘制与数位板"},+ {"Symmetry & Gizmo", "对称与操纵器"},+ {"Vertex Paint & Color", "顶点绘制与色彩"},+ {"Parts & Geometry", "部件与几何"},+ {"Materials", "材质"},+ {"Gaussian Splats", "高斯 Splat"},+ {"Look", "外观"},+ {"Colours:", "色彩:"},+ {"Match my desktop theme", "配合我的桌面主题"},+ {"Uses your Omarchy theme's colours when Omarchy is installed", "安装 Omarchy 后,使用您的 Omarchy 主题颜色"},+ {"Green", "绿色"},+ {"Amber", "琥珀色"},+ {"Scanlines & glow", "扫描线与光晕"},+ {"AI brush provider", "AI 笔刷提供商"},+ {"Autosave", "自动保存"},+ {"Bake", "烘焙"},+ {"Config", "设置"},+ {"Deformation", "变形"},+ {"Display", "显示"},+ {"Export", "导出"},+ {"Facial Shapes", "脸部形状"},+ {"Geometry", "几何"},+ {"Hotkeys", "快捷键"},+ {"Input", "输入"},+ {"Interface", "界面"},+ {"Kelvinlet & Capture", "弹性形变与捕获"},+ {"Layers", "图层"},+ {"Library", "资源库"},+ {"Masking", "遮罩"},+ {"Paint Layers", "绘制图层"},+ {"Performance", "性能"},+ {"Face Groups", "面组"},+ {"Remesh", "重新网格化"},+ {"Part", "部件"},+ {"Parts", "部件"},+ {"Tablet", "数位板"},+ {"Texture Map", "贴图"},+ {"Updates", "更新"},+ {"Vector Displacement", "矢量位移"},+ {"Visibility", "可见性"},+ {"Forge Spheres", "Forge Spheres"},+ {"Edit recipe", "编辑配方"},+ // --- Palette paths in the Ctrl-help box ("Tool > Geometry") ---+ {"Bottom shelf", "底部工具栏"},+ {"Left shelf", "左侧工具栏"},+ {"Right shelf", "右侧工具栏"},+ {"Top shelf", "顶部工具栏"},+ {"Title", "标题"},+ {"Layout", "布局"},+ {"Dynamic topology", "动态拓扑"},+ {"Camera", "相机"},+ {"Import / Export", "导入/导出"},+ {"From an image", "从图像创建"},+ {"From Image", "从图像"},+ {"Voxel Remesh", "体素重新网格化"},+ {"Modify Topology", "修改拓扑"},+ {"Game Ready", "适用于游戏"},+ {"Navigation", "导航"},+ // --- Title bar, status line, search ---+ {"Untitled", "未命名"},+ {"Project", "项目"},+ {"Search", "搜索"},+ {"Minimize", "最小化"},+ {"Menus", "菜单"},+ {"Snapshots", "快照"},+ {"Save Snapshot", "保存快照"},+ {"Base", "基底"},+ {" Splats ", " Splats "},+ {"Verts %s Tris %s Part %s (%d/%d) Layer %s%s%s", "顶点 %s 三角面 %s 部件 %s (%d/%d) 图层 %s%s%s"},+ {"Customize: Ctrl+Alt+drag to move or remove items", "自定义:按住 Ctrl+Alt 并拖动,即可移动或移除项目"},+ {"Customize off", "自定义已关闭"},+ {"Saved", "已保存"},+ {"Background: Flat Colour", "背景:纯色"},+ {"Background: Gradient", "背景:渐变"},+ // --- Command palette ---+ {"Search commands, brushes and settings", "搜索命令、笔刷和设置"},+ {"Recently used", "最近使用"},+ {" No matching commands", " 找不到相符的命令"},+ {" result", " 个结果"},+ {" results", " 个结果"},+ {"select", "选择"},+ {"run", "运行"},+ {"edit in console", "在控制台中编辑"},+ {"close", "关闭"},+ // --- Ctrl-help box ---+ {"No description yet.", "暂无说明。"},+ {"Not available right now.", "当前无法使用。"},+ {"Learn more: %s", "深入了解:%s"},+ {"Back to the palette bar", "返回调色板栏"},+ {"Move to the tray", "移至工具箱"},+ {"Take this palette out of the tray.", "将此调色板从工具箱中取出。"},+ {"Keep this palette in the right tray (Shift+click: left tray), or drag the icon onto a tray.",+ "将此调色板留在右侧工具箱(Shift+单击可移至左侧工具箱),或将图标拖动至工具箱。"},+ {"Click to open or close. Opening one closes the others (Shift+click keeps them open; Preferences > Interface).",+ "单击即可打开或关闭。打开其中一个会关闭其他项目(Shift+单击可让它们保持打开;偏好设置 > 界面)。"},+ {"Click to save the project. * means it has unsaved changes.", "单击即可保存项目。* 表示有尚未保存的更改。"},+ {"Find any command, brush or material by name and run it.", "按名称搜索任何命令、笔刷或材质,并运行。"},+ {"Minimize the SculptForge window.", "最小化 SculptForge 窗口。"},+ {"Left tray", "左侧工具箱"},+ {"Right tray", "右侧工具箱"},+ {"Shortcut for", "快捷键:"},+ // --- Shelves ---+ {"Add a brush", "添加笔刷"},+ {"Put another brush (built-in or one of yours) on this shelf.", "将其他笔刷(内置笔刷或自定义笔刷)加入此工具栏。"},+ {"One of your custom brushes.", "你的其中一个自定义笔刷。"},+ {"Remove from shelf", "从工具栏移除"},+ {"Tile size", "图标大小"},+ {"Small", "小"},+ {"Medium", "中"},+ {"Large", "大"},+ {"The active brush. Click for the brush picker; the bottom shelf holds favourites.", "当前使用的笔刷。单击可打开笔刷选择器;底部工具栏可放置我的最爱。"},+ {"How dabs follow the cursor: Dots, Drag Stamp, Slide Stamp, Spray or Lazy Stroke. Click to choose.",+ "笔触印记跟随光标的方式:点状、拖动印章、滑动印章、喷洒或延迟笔触。单击即可选择。"},+ {"The VDM brush's vector displacement map. Click to pick another.", "VDM 笔刷的矢量位移贴图。单击可选择其他贴图。"},+ {"The brush's stamp shape (white = full effect). Click for the alpha picker.", "笔刷的印章形状(白色代表完整效果)。单击可打开 Alpha 选择器。"},+ {"How the model is shaded in the view. Click for the material picker.", "模型在视图中的着色方式。单击可打开材质选择器。"},+ {"Brush radius in screen pixels. [ and ] change it by 10%; Ctrl+click to type.",+ "以屏幕像素为单位的笔刷半径。[ 和 ] 可调整 10%; 按住 Ctrl 并单击即可输入数值。"},+ {"Brush radius in screen pixels. [ and ] change it by 10%.", "以屏幕像素为单位的笔刷半径。[ 和 ] 可调整 10%."},+ {"ActiveTris / TotalTris", "当前三角面数/三角面总数"},+ {"Move", "移动"},+ {"Zoom", "缩放"},+ {"Rotate", "旋转"},+ {"Scale", "比例"},+ // --- Draw and the top shelf ---+ {"Intensity", "强度"},+ {"Smooth Intensity", "平滑强度"},+ {"Focal Length", "焦距"},+ {"Detail", "细节"},+ {"Sculpt", "雕刻"},+ {"Paint", "绘制"},+ {"Dynamic", "动态"},+ {"Constant detail", "固定细节"},+ {"Axes", "坐标轴"},+ {"No pen detected", "未检测到笔"},+ {"Pen pressure", "笔压"},+ {"Pressure > Size", "笔压 > 大小"},+ {"Pressure > Strength", "笔压 > 强度"},+ {"Front faces only", "仅限正面"},+ {"Ctrl+Shift+drag a Cut shape", "按住 Ctrl+Shift 并拖动以创建切割形状"},+ {"Depth %.2f", "深度 %.2f"},+ {"Copy the active Part (%s)", "复制当前部件 (%s)"},+ {"How deep Cut In goes, or how far Cut Add stands out, as a share of the Part's size.",+ "Cut In 的切入深度,或 Cut Add 的凸出距离,以部件大小的比例表示。"},+ {"Invert (Alt)", "反转 (Alt)"},+ {"Invert", "反转"},+ {"Smooth keeps volume", "平滑时保留体积"},+ {"Smooth face group borders only", "仅平滑面组边界"},+ {"Symmetry", "对称"},+ {"Symmetry X", "X 轴对称"},+ {"Local", "区域"},+ {"X axis", "X 轴"},+ {"Y axis", "Y 轴"},+ {"Z axis", "Z 轴"},+ {"Timeline position", "时间轴位置"},+ {"Top of viewport", "视口顶端"},+ {"How strongly painting colours the surface (1-100); Ctrl+click to type.", "绘制为表面着色的强度(1-100);按住 Ctrl 并单击即可输入数值。"},+ {"This Part has subdivision levels, so strokes don't remesh it: delete the lower (or higher) levels first.",+ "此部件具有细分层级,因此笔触不会对其重新网格化:请先删除较低(或较高)的层级。"},+ // --- Edit, File, Help ---+ {"Undo", "撤销"},+ {"Redo", "重做"},+ {"Paste brush", "粘贴笔刷"},+ {"New Sphere", "添加球体"},+ {"New Plane", "添加平面"},+ {"New Forge Sphere", "添加 Forge Sphere"},+ {"Open", "打开"},+ {"Open Recent", "打开最近使用的文件"},+ {"Save", "保存"},+ {"Save As", "另存为"},+ {"Import", "导入"},+ {"Export OBJ", "导出 OBJ"},+ {"Export STL", "导出 STL"},+ {"Export GLB", "导出 GLB"},+ {"Export LOD Chain", "导出 LOD 链"},+ {"Export USD / USDZ", "导出 USD / USDZ"},+ {"Export FBX for Unreal", "导出供 Unreal 使用的 FBX"},+ {"Export EXR", "导出 EXR"},+ {"Export Maps", "导出贴图"},+ {"Export Texture", "导出纹理"},+ {"Export Displacement", "导出位移贴图"},+ {"Export timelapse", "导出延时视频"},+ {"Send to Unreal", "发送至 Unreal"},+ {"Send to Blender", "发送至 Blender"},+ {"Receive from Blender", "从 Blender 接收"},+ {"Save Splats", "保存 Splats"},+ {"Capture from phone", "从手机捕获"},+ {"Quit", "退出"},+ {"Controls", "操作方式"},+ {"User Guide", "使用指南"},+ {"What's New", "新功能"},+ {"Check for updates", "检查更新"},+ {"Command palette", "命令面板"},+ {"Website & documentation", "网站与帮助文档"},+ {"Join the Discord", "加入 Discord"},+ {"Join the community on Discord", "加入 Discord 社区"},+ {"Report a problem", "报告问题"},+ {"Open log folder", "打开日志文件夹"},+ {"Fixes & suggestions", "修正与建议"},+ {"Benchmark (proof mode)", "性能基准测试(证明模式)"},+ {"Support SculptForge", "支持 SculptForge"},+ {"About SculptForge", "关于 SculptForge"},+ {"Welcome", "欢迎"},+ // --- Generate ---+ {"Generate 3D", "生成 3D 模型"},+ {"Choose image", "选择图片"},+ {"Change image", "更换图片"},+ {"Relief", "浮雕"},+ {"Inflate", "膨胀"},+ {"Stamp", "压印"},+ {"AI Brush", "AI 笔刷"},+ {"Image or text to a sculptable 3D model: Hugging Face (free), fal.ai, Meshy, your ComfyUI server, your own command, or an offline blockout.",+ "将图片或文本转换成可雕刻的 3D 模型:Hugging Face(免费)、fal.ai、Meshy、你的 ComfyUI 服务器、自定义命令,或脱机创建粗模。"},+ // --- Render, Display, Material ---+ {"Wireframe", "线框"},+ {"Show Mesh", "显示网格"},+ {"Show Vertex Paint", "显示顶点绘制"},+ {"Show Mask", "显示遮罩"},+ {"Show Face Groups", "显示面组"},+ {"Show Splats", "显示 Splats"},+ {"Show mesh", "显示网格"},+ {"Show mask", "显示遮罩"},+ {"Show face groups", "显示面组"},+ {"Show vertex paint", "显示顶点绘制"},+ {"Colour tints the material", "颜色会为材质染色"},+ {"Show texture", "显示纹理"},+ {"Show UVs", "显示 UV"},+ {"Mask", "遮罩"},+ {"Groups", "组"},+ {"Material colour", "材质颜色"},+ {"Colour of the Studio material (the clay colour).", "Studio 材质的颜色(粘土色)。"},+ {"Frame model", "将模型居中显示"},+ {"Frame Part", "将部件居中显示"},+ {"Fullscreen", "全屏"},+ {"Gradient", "渐变"},+ {"Flat Colour", "纯色"},+ {"Background colour", "背景颜色"},+ {"Flat", "平面"},+ {"Load Lit Sphere", "加载 Lit Sphere"},+ {"Material picker", "材质选择器"},+ {"Material swatches", "材质色板"},+ // --- Script ---+ {"Console", "控制台"},+ {"Run script file", "运行脚本文件"},+ {"Copy session as script", "将会话复制为脚本"},+ {"Clear console", "清除控制台"},+ {"Close the console", "关闭控制台"},+ {"Every action is a script command: run them with --script \"subdivide; remesh resolution=200\" or the sculptforge-cli tool.",+ "每个操作都是一条脚本命令:使用 --script \"subdivide; remesh resolution=200\" 或 sculptforge-cli 工具来运行。"},+ // --- Stroke ---+ {"Continuous", "连续"},+ {"Stroke picker", "笔触选择器"},+ {"Lazy radius", "延迟半径"},+ // --- Tool: header, Parts ---+ {"tris", "tris"},+ {"Append", "附加"},+ {"Append as Part", "附加为部件"},+ {"Add a new Part beside the model", "在模型旁添加部件"},+ {"Insert on the model", "插入模型"},+ {"Duplicate", "复制"},+ {"Rename", "重命名"},+ {"Delete", "删除"},+ {"Move up", "上移"},+ {"Move down", "下移"},+ {"Move up the list", "在列表中上移"},+ {"Move down the list", "在列表中下移"},+ {"Merge down", "向下合并"},+ {"Merge the active Part with the one below it", "将当前部件与下方部件合并"},+ {"Merge visible", "合并可见项目"},+ {"Split parts", "分离部件"},+ {"Split groups", "分离组"},+ {"One Part per disconnected piece", "每个不相连的部分各自创建一个部件"},+ {"One Part per face group", "每个面组各自创建一个部件"},+ {"Alt+click a Part to select it", "按住 Alt 并点击部件即可选择"},+ {"All Parts", "所有部件"},+ {"Solo", "单独显示"},+ {"Sphere", "球体"},+ {"Cube", "立方体"},+ {"Plane", "平面"},+ {"From file", "从文件"},+ {"Active Part's copy", "当前部件的副本"},+ {"Not enough GPU memory to show every Part: hide some or step down a subdivision level.",+ "GPU 内存不足,无法显示所有部件:请隐藏部分部件或降低一级细分。"},+ {"%s\n%zu vertices, %zu triangles%s%s\nClick to select, double-click to rename", "%s\n%zu 个顶点,%zu 个三角形%s%s\n点击以选择,双击以重命名"},+ {"Extract", "提取"},+ {"Accept", "接受"},+ {"Double", "双倍"},+ {"Thick", "厚度"},+ {"Dist", "距离"},+ // --- Geometry ---+ {"Divide", "细分"},+ {"Subdivide", "细分"},+ {"Reconstruct Subdiv", "重建细分"},+ {"Divide to Micro", "细分至微细分"},+ {"Delete Micro", "删除微细分"},+ {"Bake Micro", "烘焙微细分"},+ {"Micro Surface Noise", "微细分表面噪波"},+ {"Micro", "微细分"},+ {"SDiv", "细分级"},+ {"No subdivision levels - Divide adds them", "没有细分级别——使用“细分”添加级别"},+ {"Decimate", "减面"},+ {"Keep", "保留"},+ {"Keep Masked", "保留遮罩"},+ {"Keep Groups", "保留组"},+ {"Keep Original", "保留原始模型"},+ {"Keep Texture", "保留纹理"},+ {"Reduce the triangle count while keeping the shape. Sculpt layers are kept.", "在保留形状的同时减少三角形数量,并保留雕刻图层。"},+ {"Fraction of the triangles Decimate keeps.", "减面后保留的三角形比例。"},+ {"Mirror", "镜像"},+ {"Mirror And Weld", "镜像并焊接"},+ {"Close Gaps", "封闭间隙"},+ {"Fill holes", "填补孔洞"},+ {"Delete hidden", "删除隐藏部分"},+ // --- Quad Remesh and Remesh ---+ {"Quad Remesh", "四边形重拓扑"},+ {"Quad Remesh Guides", "四边形重拓扑引导线"},+ {"Target Polygons", "目标多边形数量"},+ {"Adaptive Size", "自适应尺寸"},+ {"Curves Strength", "曲线强度"},+ {"Guides", "引导线"},+ {"Use Vertex Paint", "使用顶点绘制"},+ {"Detect Edges", "检测边缘"},+ {"Half", "一半"},+ {"Same", "相同"},+ {"Quality Report", "质量报告"},+ {"no curves", "没有曲线"},+ {"%zu curves (%zu loops)", "%zu 条曲线(%zu 个循环)"},+ {"%zu polygons", "%zu 个多边形"},+ {"%s: %zu quads in %.1f s", "%s:%zu 个四边形,耗时 %.1f 秒"},+ {"%zu piece(s) used the legacy method", "%zu 个部分使用了旧版方法"},+ {"Corners off square: %.1f deg mean, %.0f deg worst 1%%", "角落偏离直角:平均 %.1f°,最差 %.0f°(最差的 1%%)"},+ {"Poles: %zu (3 edges %zu, 5 edges %zu, other %zu)", "极点:%zu(3 条边 %zu,5 条边 %zu,其他 %zu)"},+ {"Distance to the sculpt: %.3f%% mean, %.2f%% max", "与雕刻表面的距离:平均 %.3f%%,最大 %.2f%%"},+ {"Resolution", "分辨率"},+ {"Remeshing", "正在重拓扑"},+ {"Cancel", "取消"},+ {"Stop the remesh; the Part stays as it is.", "停止重拓扑;部件将维持当前状态。"},+ {"Voxels across the model: higher keeps more detail and makes more triangles.", "模型宽度方向的体素数量:数值越高,保留的细节越多,生成的三角形也越多。"},+ {"Remesh for sculpting", "重拓扑以利雕刻"},+ // --- Masking ---+ {"Clear", "清除"},+ {"All", "全部"},+ {"Blur", "模糊"},+ {"Sharpen", "锐化"},+ {"Grow", "扩张"},+ {"Shrink", "缩减"},+ {"By cavity", "按凹陷处"},+ {"By face group", "按面组"},+ {"Passes", "次数"},+ {"Mask Strength", "遮罩强度"},+ {"Threshold", "阈值"},+ {"Clear Mask", "清除遮罩"},+ {"Invert Mask", "反转遮罩"},+ {"Mask All", "全部加上遮罩"},+ {"Mask brush", "遮罩笔刷"},+ {"Unmask everything (Mask Pen: Ctrl + drag background)", "取消所有遮罩(遮罩笔:按住 Ctrl 并拖动背景)"},+ {"Ctrl + click background", "Ctrl + 点击背景"},+ {"Mask creases and folds (replaces the mask; uses the mask strength)", "遮罩皱褶与折痕(替换当前遮罩;使用遮罩强度设置)"},+ {"Mask one face group (replaces the mask)", "遮罩单一面组(替换当前遮罩)"},+ // --- Face Groups and Visibility ---+ {"By normals", "按法线"},+ {"By pieces", "按部件"},+ {"From mask", "从遮罩创建"},+ {"Clear groups", "清除组"},+ {"Angle", "角度"},+ {"Group by UVs", "按 UV 分组"},+ {"Masked triangles become a new group", "将遮罩中的三角形创建为新组"},+ {"New group wherever the surface turns more than the angle", "在表面转折角度大于指定角度处创建新组"},+ {"One group per disconnected piece", "每个不相连的部件各自创建一个组"},+ {"Visible face groups", "可见的面组"},+ {"Hide face group under cursor", "隐藏光标下方的面组"},+ {"Isolate face group under cursor", "隔离光标下方的面组"},+ {"Show all", "全部显示"},+ {"Unhide all", "全部取消隐藏"},+ {"Invert visible", "反转可见状态"},+ {"Hide", "隐藏"},+ {"Show", "显示"},+ {"Ctrl+Shift+click a group to isolate it, +Alt to hide it, on the background to show all.\nCtrl+Shift+drag hides outside the rectangle or lasso (Alt: inside).",+ "Ctrl+Shift+单击组可将其隔离;加按 Alt 可将其隐藏;在背景单击则显示全部。\nCtrl+Shift+拖动可隐藏矩形或套索范围外的内容(加按 Alt 则隐藏范围内的内容)。"},+ // --- Layers, paint, texture ---+ {"New paint layer", "添加绘制图层"},+ {"Delete layer", "删除图层"},+ {"Opacity", "不透明度"},+ {"Blend mode", "混合模式"},+ {"Texture", "贴图"},+ {"New Texture", "添加贴图"},+ {"Import Texture", "导入贴图"},+ {"Delete Texture", "删除贴图"},+ {"Vertex Paint > Texture", "顶点绘制 > 贴图"},+ {"Texture > Vertex Paint", "贴图 > 顶点绘制"},+ {"Texture size", "贴图尺寸"},+ {"Auto UV", "自动 UV"},+ {"Pick colour", "采样颜色"},+ {"Switch Color", "交换颜色"},+ {"Main colour", "主要颜色"},+ {"Second colour", "次要颜色"},+ // --- Transform and the gizmo ---+ {"Gizmo", "操纵器"},+ {"Front view", "前视图"},+ {"Back view", "后视图"},+ {"Left view", "左视图"},+ {"Right view", "右视图"},+ {"Top view", "顶视图"},+ {"Bottom view", "底视图"},+ {"Opposite side", "相反侧"},+ {"Orbit left", "向左环绕"},+ {"Orbit right", "向右环绕"},+ {"Orbit up", "向上环绕"},+ {"Orbit down", "向下环绕"},+ {"Zoom in", "放大"},+ {"Zoom out", "缩小"},+ {"Orthographic", "正交"},+ {"Larger brush", "放大笔刷"},+ {"Smaller brush", "缩小笔刷"},+ {"Pivot", "枢轴点"},+ // --- Preferences > Config ---+ // --- Preferences > Interface ---+ {"Language", "语言"},+ {"Tooltip delay", "工具提示延迟"},+ {"One sub-palette open", "一次只打开一个子调色板"},+ {"Reduce motion", "减少动态效果"},+ {"Auto collapse left tray", "自动折叠左侧工具箱"},+ {"Auto collapse right tray", "自动折叠右侧工具箱"},+ {"Palettes strictly A-Z", "调色板严格按 A 至 Z 排列"},+ {"Left-handed layout", "左手操作布局"},+ {"Shelf tiles", "工具栏图标大小"},+ {"UI scale", "界面缩放比例"},+ {"Automatic", "自动"},+ {"Rotation", "旋转"},+ {"Turntable", "转盘"},+ {"Camera notch", "相机刘海区"},+ {"Always reserve", "始终保留空间"},+ {"Off", "关闭"},+ {"Hold Ctrl and point at any control to see what it does and its shortcut. Ctrl+Alt shows a command's scripting parameters.",+ "按住 Ctrl,将光标移至任何控件上,即可查看其功能和快捷键。按 Ctrl+Alt 可查看命令的脚本参数。"},+ {"How long to point at an icon-only button (or a clipped label) before its name appears.",+ "光标停留在仅含图标的按钮(或被截断的标签)上多久后,才会显示其名称。"},+ {"Opening a sub-palette closes the others in that palette. Shift+click opens more than one.",+ "打开子调色板时,会关闭同一调色板中的其他子调色板。按住 Shift 并单击,可同时打开多个。"},+ {"Opening a palette in the left tray collapses the others when they would not fit.", "在左侧工具箱打开调色板时,若空间不足,其他调色板会自动折叠。"},+ {"Opening a palette in the right tray collapses the others when they would not fit.", "在右侧工具箱打开调色板时,若空间不足,其他调色板会自动折叠。"},+ {"Mirror the shelves and trays: tools on the left, navigation on the right.", "镜像排列工具栏和工具箱:左侧放工具,右侧放导航控件。"},+ {"How big the brush tiles on the bottom shelf are. Small leaves the most room for the model.",+ "设置底部工具栏上笔刷图标的大小。选择小型可为模型保留最多空间。"},+ // --- Preferences > Input ---+ {"Style", "操作风格"},+ {"Blender", "Blender"},+ {"Maya", "Maya"},+ {"SculptForge", "SculptForge"},+ {"Emulate Numpad", "模拟数字键盘"},+ {"Right click opens the Quick Menu", "按鼠标右键打开快速菜单"},+ {"Hold Space and drag to move the camera", "按住空格键并拖动以移动相机"},+ {"Start strokes off the model", "在模型外开始笔触"},+ {"Strokes start off the model", "笔触从模型外开始"},+ {"Toggle strokes off the model", "切换在模型外开始笔触"},+ {"Cursor follows surface", "光标沿着表面移动"},+ {"Hide ring while stroking", "绘制时隐藏圆环"},+ {"Outlines", "轮廓线"},+ {"Don't show again", "不再显示"},+ {"Hints", "提示"},+ {"Show hints in the viewport", "在视口中显示提示"},+ {"Show all hints again", "重新显示所有提示"},+ {"Previewing an LOD", "正在预览 LOD"},+ {"Face landmark steps", "脸部特征点步骤"},+ {"Subtle", "细微"},+ {"Outline opacity", "轮廓线不透明度"},+ {"Viewport cursor", "视口光标"},+ {"Crosshair", "十字线"},+ {"Arrow", "箭头"},+ {"Import Blender keymap", "导入 Blender 快捷键配置"},+ {"Quick Menu", "快速菜单"},+ // --- Preferences > Hotkeys ---+ {"Filter", "筛选"},+ {"press a key", "按下任意按键"},+ {"Default shortcuts", "默认快捷键"},+ // --- Preferences > Display, Library, Tablet, Performance, Updates, Autosave ---+ {"Show at startup", "启动时显示"},+ {"Show Library at startup", "启动时显示资源库"},+ {"Placement", "位置"},+ {"Top", "上方"},+ {"Bottom", "下方"},+ {"Rows", "行数"},+ {"Library folder", "资源库文件夹"},+ {"Use the default folder", "使用默认文件夹"},+ {"Mouse & pen", "鼠标与笔"},+ {"Mouse mode (relative)", "鼠标模式(相对)"},+ {"Mouse mode", "鼠标模式"},+ {"Pressure curve", "压力曲线"},+ {"Pressure test", "压力测试"},+ {"Pressure meter", "压力计"},+ {"Tablet defaults", "数位板默认值"},+ {"Tilt X %+.0f\xc2\xb0 Y %+.0f\xc2\xb0", "倾斜 X %+.0f\xc2\xb0 Y %+.0f\xc2\xb0"},+ {"Min", "最小值"},+ {"Max", "最大值"},+ {"Minimum", "最小值"},+ {"Maximum", "最大值"},+ {"Full at", "达到满值"},+ {"Full pressure at", "达到最大压力"},+ {"Curve", "曲线"},+ {"Pen", "笔"},+ {"Keyboard", "键盘"},+ {"Bring the pen close to the tablet. Pressure works through the system's tablet driver.", "将笔靠近数位板。压力感应由系统的数位板驱动程序提供。"},+ {"Bring the pen close to the tablet. Wacom: turn on \"Use Windows Ink\" in Wacom Tablet Properties > Mapping; Huion / XP-Pen: enable Windows Ink in the driver.",+ "将笔靠近数位板。Wacom:在 Wacom Tablet Properties > Mapping 中启用 \"Use Windows Ink\";Huion / XP-Pen:在驱动程序中启用 Windows Ink。"},+ {"SpaceMouse (experimental)", "SpaceMouse(实验性功能)"},+ {"Use SpaceMouse", "使用 SpaceMouse"},+ {"SpaceMouse speed", "SpaceMouse 速度"},+ {"SpaceMouse defaults", "SpaceMouse 默认值"},+ {"Speed", "速度"},+ {"Dead zone", "死区"},+ {"Dominant axis", "主要轴"},+ {"Lock rotation to turntable", "将旋转锁定为转盘模式"},+ {"Plug it in. If 3DxWare is installed it may keep the device to itself: see the Navigation page of the guide.",+ "请接上设备。如果已安装 3DxWare,它可能会独占此设备;请参阅指南中的“导航”页面。"},+ {"Push the cap: if the bars below stay still, another program (3DxWare, spacenavd) holds the SpaceMouse. See the Navigation page of the guide.",+ "推动控制帽:如果下方的指示条没有反应,表示 SpaceMouse 正被其他程序(3DxWare、spacenavd)占用。请参阅指南中的“导航”页面。"},+ {"No joysticks or game controllers seen.", "找不到摇杆或游戏控制器。"},+ {"Plug it in. SculptForge reads it as a joystick (/dev/input): you need read access to it, and spacenavd may hold it. See the Navigation page of the guide.",+ "请接上设备。SculptForge 会将它辨识为摇杆(/dev/input):你需要有读取权限,而且它可能正被 spacenavd 占用。请参阅指南中的“导航”页面。"},+ {"Antialiasing", "抗锯齿"},+ {"Anti-aliasing", "抗锯齿"},+ {"Fast Navigation", "快速导航"},+ {"Multithreading", "多线程"},+ {"Predictive Strokes", "预测笔触"},+ {"Draft Strokes", "草稿笔触"},+ {"%d threads", "%d 个线程"},+ {"Memory", "内存"},+ {"Hardware profile", "硬件配置文件"},+ {"Frame Governor", "帧速率调节器"},+ {"Re-calibrate", "重新校准"},+ {"Keep vertical sync on (frame rate capped at the display's)", "保持垂直同步(帧速率上限为屏幕刷新率)"},+ {"Every %d min", "每 %d 分钟"},+ {"Autosave off", "自动保存已关闭"},+ {"Save a recovery copy this often (0 = off). Restored after a crash.", "按此间隔保存恢复副本(0 = 关闭)。当程序崩溃后可还原。"},+ // --- Library ---+ {"Image", "图像"},+ {"Recent", "最近使用"},+ {"Nothing here yet.", "暂无内容。"},+ {"Nothing here yet. Projects you save (Ctrl+S) into the User folder show up here.", "暂无内容。保存(Ctrl+S)至 User 文件夹的项目会显示在这里。"},+ {"Nothing here yet. Save Snapshot keeps timestamped copies of your scene here.", "暂无内容。使用“保存快照”后,场景的时间戳副本会保存在这里。"},+ {"Nothing here yet. Files you open show up here.", "暂无内容。打开的文件会显示在这里。"},+ {"Nothing here yet. Put reference images in the User folder.", "暂无内容。请将参考图像放入 User 文件夹。"},+ {"Nothing here yet. Put Gaussian splat captures (.ply, .splat) in the User folder.",+ "暂无内容。请将 Gaussian splat 捕获文件(.ply、.splat)放入 User 文件夹。"},+ {"Back", "上一页"},+ {"Forward", "下一页"},+ {"Open folder", "打开文件夹"},+ {"Close Library", "关闭资源库"},+ {"Relief from image", "从图像创建浮雕"},+ {"Inflate image", "膨胀图像"},+ {"Project onto model", "投影至模型"},+ {"Use as alpha", "用作 Alpha"},+ {"Use as Alpha", "用作 Alpha"},+ {"Use as VDM", "用作 VDM"},+ {"Show in file manager", "在文件管理器中显示"},+ {"Refresh thumbnail", "刷新缩略图"},+ {"Nothing here matches \"%s\".", "找不到符合“%s”的项目。"},+ {"Library rows", "资源库行数"},+ {"Library at the top", "资源库置于上方"},+ {"Library at the bottom", "资源库置于下方"},+ {"Show the items whose names contain this text.", "只显示名称包含这段文本的项目。"},+ {"Show only the items whose names contain this text.", "只显示名称包含这段文本的项目。"},+ {"The previous tab or folder.", "返回上一个选项卡或文件夹。"},+ {"Forward again after going back.", "返回后再次前进。"},+ {"Hide the Library (comma toggles it).", "隐藏资源库(按逗号键切换显示)。"},+ {"How many rows of thumbnails the Library shows (1-4).", "设置资源库中缩略图的行数(1-4)。"},+ {"Your projects (.sfproj) and recently opened projects.", "你的项目(.sfproj)及最近打开的项目。"},+ {"Models to start from or append as Parts: primitives and model files.", "可作为起始模型或添加为部件的模型:基本几何体与模型文件。"},+ {"Every brush: built-in, custom and .sfbrush files in your library.", "所有笔刷:内置笔刷、自定义笔刷,以及资源库中的 .sfbrush 文件。"},+ {"Brush alphas: built-in stamps and images in your Alphas folder.", "笔刷 Alpha:内置印章及 Alphas 文件夹中的图像。"},+ {"Viewport materials: Studio and the Lit Spheres.", "视口材质:Studio 和 Lit Spheres。"},+ {"Reference images: generate 3D, relief, inflate, project onto the model or use as an alpha.",+ "参考图像:生成 3D 模型、创建浮雕、膨胀图像、投影至模型,或用作 Alpha。"},+ {"Gaussian splat captures (.ply, .splat) to sculpt against.", "用于对照雕刻的 Gaussian splat 捕获文件(.ply、.splat)。"},+ {"Snapshots and the autosave, newest first.", "快照与自动保存文件,最新的排在最前面。"},+ {"Recently opened files of every kind.", "最近打开的各类文件。"},+ {"Add a folder of your own to the Library (shown at the root of every tab).", "将自己的文件夹添加至资源库(会显示在每个选项卡的根目录)。"},+ {"Browse projects, models, brushes, alphas, materials, images and splats. Double-click to load; Shift+double-click a model to append it as a Part; drag sideways to scrub.",+ "浏览项目、模型、笔刷、Alpha、材质、图像和 splat。双击即可加载;对模型按 Shift+双击可将其添加为部件;左右拖动即可快速浏览。"},+ // --- Pickers and brushes ---+ {"Brush picker", "笔刷选择器"},+ {"Alpha picker", "Alpha 选择器"},+ {"Community brushes", "社区笔刷"},+ {"Save to Library", "保存至资源库"},+ {"Strength", "强度"},+ {"Falloff", "衰减"},+ {"Name", "名称"},+ // --- Common words and buttons ---+ {"Apply", "应用"},+ {"Reset", "重置"},+ {"Preview", "预览"},+ {"Finish", "完成"},+ {"Close", "关闭"},+ {"OK", "确定"},+ {"Yes", "是"},+ {"No", "否"},+ {"Lock", "锁定"},+ {"Live", "实时"},+ {"Mean", "平均值"},+ {"Source", "来源"},+ {"Method", "方法"},+ {"Weight", "权重"},+ {"Review", "审阅"},+ {"Network", "网络"},+ {"Contents", "内容"},+ {"Video", "视频"},+ {"Surface", "表面"},+ {"World", "世界"},+ {"Vertex", "顶点"},+ {"Front", "前方"},+ {"Rear", "后方"},+ {"Sharpness", "锐利度"},+ {"Padding", "内边距"},+ {"Map size", "贴图大小"},+ {"Map Size", "贴图大小"},+ {"Output folder", "输出文件夹"},+ {"Output Folder", "输出文件夹"},+ {"Open in browser", "在浏览器中打开"},+ {"Open Folder", "打开文件夹"},+ // --- Project: unsaved changes, recovery, updates ---+ {"Clear Recent", "清除最近使用项目"},+ {"Autosave (min)", "自动保存(分钟)"},+ {"Save changes to %s before continuing?", "继续之前要将更改保存至 %s 吗?"},+ {"Your changes will be lost if you don't save them.", "如果不保存,更改将会遗失。"},+ {"Don't Save", "不要保存"},+ {"SculptForge did not close normally last time.", "SculptForge 上次未正常关闭。"},+ {"Restore the autosaved work?", "要还原自动保存的工作内容吗?"},+ {"What happened is in sculptforge-previous.log (Help > Open log folder);", "详细日志请见 sculptforge-previous.log(帮助 > 打开日志文件夹);"},+ {"please attach it if you report the problem.", "报告问题时请附上此文件。"},+ {"Restore", "还原"},+ {"Discard", "丢弃"},+ {"SculptForge %s is available", "SculptForge %s 已推出"},+ {"(you have %s)", "(你当前使用的是 %s)"},+ {"What's new", "版本新功能"},+ {"Download", "下载"},+ {"Later", "稍后"},+ {"Skip this version", "跳过此版本"},+ {"Checking", "正在检查"},+ {"This build gets its updates from your package manager.", "此版本的更新由你的包管理器提供。"},+ // --- Sculpt Timeline ---+ {"Sculpt Timeline", "雕刻时间轴"},+ {"Step %zu of %zu", "第 %zu 步,共 %zu 步"},+ {"Step %d: %s", "第 %d 步:%s"},+ {"Save with project", "与项目一并保存"},+ {"Start of the history", "历史记录起点"},+ {"Show the model here", "在此显示模型"},+ {"Sculpting from an earlier step starts a branch;\nthe later steps stay as a lane above.",+ "从较早的步骤开始雕刻会创建分支;\n后续步骤则会保留在上方的时间轴轨道中。"},+ {"The history of the active Part (%zu steps up to the cursor) played as a turntable.", "以转盘方式播放当前部件的历史记录(光标之前共 %zu 步)。"},+ {"Length", "长度"},+ {"Rendering timelapse", "正在渲染延时视频"},+ // --- Color, Vertex Paint, paint layers ---+ {"Fill", "填满"},+ {"Fill layer", "填满图层"},+ {"Fill masked", "填满遮罩区域"},+ {"Fill the unmasked area (the whole mesh if nothing is masked)", "填满未遮罩区域(若没有任何遮罩,则填满整个网格)"},+ {"Cavity", "凹陷"},+ {"Darken creases and cavities (respects the mask)", "加深皱褶与凹陷(遵循遮罩)"},+ {"Background", "背景"},+ {"Shading", "着色"},+ {"Scene", "场景"},+ {"Colour", "色彩"},+ {"Base colour", "基础色彩"},+ {"Paint brush (P)", "绘制笔刷 (P)"},+ {"Paint into", "绘制到"},+ {"Paint layer", "绘制图层"},+ {"Painting on: %s", "正在绘制于:%s"},+ {"Painting on: texture, %s", "正在绘制于:纹理,%s"},+ {"Layer channel", "图层通道"},+ {"Channel view", "通道视图"},+ {"RGB while sculpting", "雕刻时使用 RGB"},+ {"Min Opacity", "最低不透明度"},+ {"+ Add", "+ 添加"},+ {"Group %d", "组 %d"},+ {"Group", "组"},+ {"(Ctrl paints, Ctrl+Alt erases)", "(Ctrl 绘制,Ctrl+Alt 擦除)"},+ {"(Ctrl masks, Ctrl+Alt unmasks)", "(Ctrl 遮罩,Ctrl+Alt 取消遮罩)"},+ // --- More actions (shelves, Quick Menu, palettes) ---+ {"Shelves", "工具栏"},+ {"Frame", "居中显示"},+ {"Intensity at cursor", "光标处的强度"},+ {"Falloff at cursor", "光标处的衰减"},+ {"Last stroke", "最后一笔"},+ {"To Surface", "到表面"},+ {"Crop Box", "裁剪框"},+ {"Make Mesh", "创建网格"},+ {"Delete Last", "删除最后一个"},+ {"Make sculptable", "转为可雕刻"},+ {"Sculpt to Splats", "雕刻转为 Splats"},+ {"Preview Normal Map", "预览法线贴图"},+ {"AA Off", "关闭抗锯齿"},+ {"AA 2x", "抗锯齿 2x"},+ {"AA 4x", "抗锯齿 4x"},+ {"AA 8x", "抗锯齿 8x"},+ {"Pan X", "X 轴平移"},+ {"Pan Y", "Y 轴平移"},+ {"Roll", "翻滚"},+ {"Tilt", "倾斜"},+ {"Spin", "旋转"},+ // --- Extract, Project, Deformation ---+ {"E Smt", "E Smt"},+ {"Parts too", "连同其他部件"},+ {"This Part", "此部件"},+ {"Move along normals", "沿法线移动"},+ {"Mirror left and right", "左右镜像"},+ {"Flip X", "翻转 X 轴"},+ {"Flip Y", "翻转 Y 轴"},+ {"Flip Z", "翻转 Z 轴"},+ {"Swap Y/Z", "交换 Y/Z 轴"},+ {"Squash", "压缩"},+ {"Fit plane", "拟合平面"},+ {"Edge Fade", "边缘淡化"},+ {"Base Smoothing", "基础平滑"},+ {"All pieces", "所有部分"},+ {"Face loops", "面环"},+ {"Low-poly", "低多边形"},+ {"Base mesh", "基础网格"},+ // --- Bake ---+ {"Baking", "烘焙"},+ {"AO rays", "AO 光线"},+ {"AO reach", "AO 范围"},+ {"Auto distance", "自动距离"},+ {"Max Frontal Distance", "最大正面距离"},+ {"Max Rear Distance", "最大背面距离"},+ {"Normal map convention", "法线贴图惯例"},+ {"Export preset", "导出预设"},+ {"EXR displacement", "EXR 位移贴图"},+ {"UV view", "UV 视图"},+ // --- Facial shapes, Make sculptable, phone, splats ---+ {"Generate Facial Shapes", "生成脸部形状"},+ {"Record face take", "录制脸部表演"},+ {"Play Take", "播放录制"},+ {"Load Take", "加载录制"},+ {"Bake Take", "烘焙录制"},+ {"Clear Baked Take", "清除已烘焙的录制"},+ {"Cancel Bake", "取消烘焙"},+ {"Take", "录制"},+ {"Live axes", "实时坐标轴"},+ {"Landmarks", "特征点"},+ {"Place Landmarks", "放置特征点"},+ {"Auto Landmarks", "自动放置特征点"},+ {"Clear Landmarks", "清除特征点"},+ {"Place by hand", "手动放置"},+ {"Good enough - stop", "够好了 - 停止"},+ {"Try a test head", "试用测试头部"},+ {"Face test", "脸部测试"},+ {"From scan", "从扫描"},+ {"Keep scan", "保留扫描"},+ {"Generate from a photo at once", "立即从照片生成"},+ {"Capture from view", "从视图捕获"},+ {"Pairing code", "配对码"},+ {"QR code", "QR 码"},+ {"Unreal is on another computer", "Unreal 在另一台电脑上"},+ {"Receive automatically", "自动接收"},+ {"Update after each stroke", "每次笔触后更新"},+ {"Record a video of the run (needs ffmpeg)", "录制运行过程视频(需要 ffmpeg)"},+ {"Choose Brush", "选择 Brush"},+ {"Choose COLMAP", "选择 COLMAP"},+ {"Photos Folder", "照片文件夹"},+ {"Find again", "重新查找"},+ // --- VDM, Kelvinlet, brush editing ---+ {"Create VDM", "创建 VDM"},+ {"Load VDM", "加载 VDM"},+ {"New VDM Plane", "添加 VDM 平面"},+ {"VDM name", "VDM 名称"},+ {"Plane Res", "平面分辨率"},+ {"Normal tilt", "法线倾斜"},+ {"Detail Clone", "细节复制"},+ {"Clone Spacing", "复制间距"},+ {"Clone follows stroke", "复制跟随笔触"},+ {"Refine the selected brush", "调整选择的笔刷"},+ {"Preset amount", "预设数量"},+ {"preset amount", "预设数量"},+ {"Reset to 1", "重置为 1"},+ {"Scatter", "散布"},+ {"Loop", "循环"},+ {"Letter index", "字母索引"},+ {"Load image", "加载图片"},+ {"Invert loaded image", "反转加载的图片"},+ {"Dark is high", "暗部高"},+ // --- App.cpp (tools/i18n/coverage.py) ---+ {"Strokes go into the base shape, not a layer.", "笔触会进入基底形状,而不是图层。"},+ {"Select to sculpt into this layer. With subdivision levels, record at any level: a layer keeps its own detail on "+ "every level and follows Lower Level / Higher Level and Divide.",+ "选择后即可雕刻到此图层。有细分层级时,可在任何层级录制:图层在每个层级都保有自己的细节,并跟随降低层级/提高层"+ "级与细分。"},+ {"Animate this blend shape 0 -> 1 -> 0 (Stop sets it back to 1).",+ "播放此混合形状 0 -> 1 -> 0 的动画(停止会将它设回 1)。"},+ {"Delete this layer on every subdivision level (undoable).", "在每个细分层级删除此图层(可撤销)。"},+ {"How strongly the layer shows: 0 = off, 1 = as sculpted. One weight for every subdivision level.",+ "图层显示的强度:0 = 关闭,1 = 雕刻时的样子。所有细分层级共用一个权重。"},+ {"Add a sculpt layer with the name typed beside it; strokes go into it.",+ "以旁边输入的名称添加雕刻图层;笔触会进入此图层。"},+ {"Hugging Face token", "Hugging Face 令牌"},+ {"Free at huggingface.co/settings/tokens (read access). Raises the free daily allowance in Generate 3D, and "+ "TRELLIS.2 needs it. Empty = the HF_TOKEN environment variable.",+ "可在 huggingface.co/settings/tokens 免费获取(读取权限)。可提高“生成 3D 模型”的每日免费额度,TRELLIS.2 也需"+ "要它。留空 = 使用 HF_TOKEN 环境变量。"},+ {"Load a built-in test capture (a stylised head as Gaussian splats, with a few floaters) to try Make sculptable "+ "without a scan of your own. splat_test_capture kind=object loads a mug instead.",+ "加载内置的测试捕获(以高斯 Splat 呈现的风格化头部,带有少量浮点),不需要自己的扫描即可试用“转为可雕刻”。"+ "splat_test_capture kind=object 则加载马克杯。"},+ // --- Config.cpp (tools/i18n/coverage.py) ---+ {"Close Holes", "封闭孔洞"},+ {"Cap every open boundary of the active Part (a hole, an open bottom, the rim of an extracted shell) with a new "+ "patch sized like the polygons around it, so remeshing and sculpting see a closed surface. The rest of the Part "+ "stays as it is; the patches get a face group of their own (#103).",+ "以新的面片封闭当前部件的每个开放边界(孔洞、开放的底部、提取外壳的边缘),面片大小与周围多边形相近,让重新网"+ "格化与雕刻看到封闭的表面。部件的其余部分保持不变;面片会有自己的面组 (#103)。"},+ {"Add a subdivision level: four times the polygons, and the lower levels are kept, so you can step down to shape "+ "big forms and back up to the detail. Quads stay quads (Catmull-Clark). Smt off divides without smoothing.",+ "添加一个细分层级:多边形变为四倍,并保留较低层级,让你能回到低层级塑造大形,再回到细节。四边面维持四边面 "+ "(Catmull-Clark)。关闭 Smt 时细分不会平滑。"},+ {"Smooth the next Divide (on by default). Off: the new level keeps the hard edges and flat faces of the one below.",+ "平滑下一次细分(默认打开)。关闭:新层级保留下层的硬边与平面。"},+ {"Lower Level", "降低层级"},+ {"Step one subdivision level down (fewer polygons, for big forms). The detail of the higher levels is kept.",+ "降低一个细分层级(较少多边形,用于大形)。较高层级的细节会保留。"},+ {"Higher Level", "提高层级"},+ {"Step one subdivision level up (more polygons, for detail). Edits made below carry the detail along.",+ "提高一个细分层级(较多多边形,用于细节)。在下层所做的编辑会带着细节一起变化。"},+ {"Delete Lower", "删除较低层级"},+ {"Delete Higher", "删除较高层级"},+ {"Store the surface above the highest level as micro displacements: hundreds of millions of sculptable triangles "+ "in a fraction of the memory (300M take about 0.4 GB). The Micro slider sets how fine.",+ "将最高层级之上的表面保存为微细分位移:数亿个可雕刻三角面,只占一小部分内存(3 亿个约 0.4 GB)。“微细分”滑块"+ "设置精细程度。"},+ {"Turn the micro level into a regular mesh in a new Part (for export or tools that need real geometry).",+ "将微细分层级转为新部件中的普通网格(用于导出或需要真实几何的工具)。"},+ {"Write the micro level as a 32-bit EXR displacement map over the base UVs (next to the project).",+ "将微细分层级写成基底 UV 上的 32 位 EXR 位移贴图(放在项目旁)。"},+ {"Duplicate Part", "复制部件"},+ {"Copy the active Part, with its layers and attributes, and make the copy active (also in the Parts list's "+ "right-click menu).",+ "复制当前部件及其图层与属性,并将副本设为当前(部件列表的右键菜单中也有)。"},+ {"Make a shell from the masked part of the Part (a helmet, a strap, clothing), shown as a preview below it. "+ "Change Thick, E Smt or Double and it updates; Accept keeps it as a new Part.",+ "从部件的遮罩区域创建外壳(头盔、带子、衣物),并在下方显示预览。更改厚度、E Smt 或双倍时会实时更新;按“接受”"+ "即保留为新部件。"},+ {"Keep the Extract preview as a new Part below this one. Ctrl+Z takes it away again.",+ "将提取预览保留为此部件下方的新部件。按 Ctrl+Z 可再移除。"},+ {"Grow the extracted shell both inward and outward from the surface, instead of outward only.",+ "让提取的外壳从表面同时向内与向外长出,而不只是向外。"},+ {"Triangle corners: where the extracted edge turns sharply, the rim is made of triangles instead of quads.",+ "三角形角落:提取边缘急转之处,边缘改用三角面而非四边面。"},+ {"Triangle border: the whole rim of the extracted shell is made of triangles instead of quads.",+ "三角形边缘:提取外壳的整圈边缘都改用三角面而非四边面。"},+ {"Mirror the + side of the Part onto the - side across the chosen axis and weld the seam into one watertight "+ "mesh. Face Groups and vertex paint come along. To keep the other side, Deformation > Mirror first.",+ "沿所选轴将部件的 + 侧镜像到 - 侧,并将接缝焊接成一个封闭网格。面组与顶点绘制也会一并处理。若要保留另一侧,请"+ "先使用变形 > 镜像。"},+ {"Flip the Part across the chosen axis, through the origin (the plane symmetry and Mirror And Weld use).",+ "沿所选轴经由原点翻转部件(对称与镜像并焊接所用的平面)。"},+ {"An axis Mirror And Weld mirrors across (several: one after the other).",+ "镜像并焊接所沿的轴(多个时:按序处理)。"},+ {"An axis Mirror flips along (several: one after the other).", "镜像翻转所沿的轴(多个时:按序处理)。"},+ {"New from Starter Mesh...", "从起始网格添加..."},+ {"Start from a base mesh: human head, bust, full body, hand, foot, ear, eye, stylised and creature heads, torso, "+ "or a bevelled box, cylinder, capsule or ring (Library > Tool > Starter meshes).",+ "从基础网格开始:人头、半身像、全身、手、脚、耳朵、眼睛、风格化与生物头部、躯干,或倒角方块、圆柱、胶囊或圆环("+ "资源库 > 工具 > 起始网格)。"},+ {"Open a project (.sfproj), a model (.obj, .glb, .fbx, .stl, .ply, .usd ...) or splats.",+ "打开项目 (.sfproj)、模型 (.obj、.glb、.fbx、.stl、.ply、.usd ...) 或 Splat。"},+ {"Save the project (.sfproj: every Part, layer, brush and setting). Asks for a name the first time.",+ "保存项目(.sfproj:每个部件、图层、笔刷与设置)。第一次会询问名称。"},+ {"Save the project under a new name.", "以新名称保存项目。"},+ {"Export the model as glTF binary, with sculpt layers as blend shapes (morph targets).",+ "将模型导出为二进位 glTF,雕刻图层会成为混合形状 (morph target)。"},+ {"Save the visible Parts as one binary STL, for 3D printing.", "将可见部件保存为单一二进位 STL,用于 3D 打印。"},+ {"Export a game-ready FBX and import it into the running Unreal Editor (Python remote execution).",+ "导出适用于游戏的 FBX,并导入运行中的 Unreal Editor(Python 远程运行)。"},+ {"Send the visible Parts back to Blender (the SculptForge add-on): objects that came from Blender update in "+ "place, keeping their transform, materials and modifiers; new Parts become new objects.",+ "将可见部件送回 Blender(SculptForge 插件):来自 Blender 的对象会就地更新,保留其变换、材质与修改器;新部件"+ "则成为新对象。"},+ {"Load what Blender last sent with the add-on's Send to SculptForge. Each object updates its Part (undoable) or "+ "becomes a new one; this happens by itself while Receive automatically is on.",+ "加载 Blender 最后通过插件的 Send to SculptForge 发送的内容。每个对象会更新对应的部件(可撤销)或成为新部件"+ ";打开“自动接收”时会自动进行。"},+ {"Send to Maya", "发送到 Maya"},+ {"Send the visible Parts to Maya (OBJ with quads and UVs) through the exchange folder you chose; Get from "+ "SculptForge on Maya's SculptForge shelf loads them, replacing the objects they came from by name.",+ "通过你选择的交换文件夹将可见部件发送到 Maya(含四边面与 UV 的 OBJ);Maya 的 SculptForge 工具架上的 Get from "+ "SculptForge 会加载它们,并按名称替换原本的对象。"},+ {"Get from Maya", "从 Maya 获取"},+ {"Load what Maya last sent with the shelf's Send to SculptForge. Each object replaces the Part with its name "+ "(undoable) or becomes a new one.",+ "加载 Maya 最后通过工具架的 Send to SculptForge 发送的内容。每个对象会替换同名的部件(可撤销)或成为新部件。"},+ {"Exchange folder...", "交换文件夹..."},+ {"Choose the folder SculptForge and Maya exchange meshes through (pick the same one in Maya's shelf script). "+ "SculptForge reads and writes only there, and only when you send or get.",+ "选择 SculptForge 与 Maya 交换网格的文件夹(在 Maya 的工具架脚本中选同一个)。SculptForge 只在该处读写,且只在"+ "你发送或获取时进行。"},+ {"Add the brush on the clipboard: a brush code someone shared, or the text of a .sfbrush file.",+ "加入剪贴板中的笔刷:别人分享的笔刷代码,或 .sfbrush 文件的文本。"},+ {"Every brush keeps its own Size, Intensity, Falloff, Colour intensity, stroke and alpha while you work. This "+ "saves the current brush's, so it starts with them every time SculptForge opens.",+ "工作时每个笔刷都保有自己的大小、强度、衰减、色彩强度、笔触与 Alpha。此功能会保存当前笔刷的设置,让它在每次打开 "+ "SculptForge 时都以此开始。"},+ {"Put the current brush's Size, Intensity, Falloff, Colour intensity, stroke and alpha back to the values "+ "SculptForge ships with, and forget what Save Brush Settings stored for it.",+ "将当前笔刷的大小、强度、衰减、色彩强度、笔触与 Alpha 还原为 SculptForge 的默认值,并丢弃“保存笔刷设置”为它保"+ "存的内容。"},+ {"On: Size and Intensity stay as they are when you pick another brush (as before 0.10.8); Falloff, Colour "+ "intensity, the stroke and the alpha still follow each brush. Off (the default): every brush keeps its own.",+ "开启:切换到其他笔刷时大小与强度维持不变(与 0.10.8 之前相同);衰减、色彩强度、笔触与 Alpha 仍跟随各笔刷。关闭"+ "(默认):每个笔刷保有自己的设置。"},+ {"Make the brush 10% smaller (hold to repeat; Shift+[ steps one pixel).",+ "将笔刷缩小 10%(按住可重复;Shift+[ 每次一个像素)。"},+ {"Make the brush 10% larger (hold to repeat; Shift+] steps one pixel).",+ "将笔刷放大 10%(按住可重复;Shift+] 每次一个像素)。"},+ {"Mirror strokes across the X axis (left / right).", "沿 X 轴镜像笔触(左/右)。"},+ {"Show the mesh's polygons (quads and triangles) over the surface.",+ "在表面上显示网格的多边形(四边面与三角面)。"},+ {"Fit the whole model in the view.", "将整个模型置入视图。"},+ {"Take the paint colour from the model under the cursor.", "从光标下的模型取用绘制色彩。"},+ {"Every shortcut and mouse gesture, generated from the commands themselves.",+ "所有快捷键与鼠标手势,直接由命令本身生成。"},+ {"The SculptForge user guide: every tool explained, with search. Hold Ctrl over a control and press F1 to open "+ "the chapter about it.",+ "SculptForge 使用指南:说明每项工具,并可搜索。按住 Ctrl 停在控件上再按 F1,即可打开相关章节。"},+ {"Your first sculpt (10 min)", "你的第一个雕刻作品(10 分钟)"},+ {"A step-by-step lesson for complete beginners: a cute owl head from the default sphere, painted and rendered, in "+ "about ten minutes.",+ "给完全新手的分步教程:从默认球体做出可爱的猫头鹰头部,上色并渲染,约十分钟完成。"},+ {"Quick tour", "快速导览"},+ {"Ten short slides for sculptors who know another app: where remeshing, dynamic topology, retopology, levels, "+ "masking, cut, brushes and baking are, each with a Show me button.",+ "给熟悉其他软件的雕刻者的十张简短幻灯片:重新网格化、动态拓扑、重新拓扑、层级、遮罩、切割、笔刷与烘焙在哪里,每"+ "张都有“示范给我看”按钮。"},+ {"What changed in this version and the ones before it (opens once by itself after an update).",+ "此版本与先前版本的更改(更新后会自动打开一次)。"},+ {"Ask the SculptForge website whether a newer version is out. SculptForge also checks by itself once a day "+ "(Preferences > Updates).",+ "向 SculptForge 网站确认是否有新版本。SculptForge 每天也会自动检查一次(偏好设置 > 更新)。"},+ {"Version, licence and the open-source components SculptForge is built with.",+ "版本、许可,以及 SculptForge 所使用的开源组件。"},+ {"SculptForge is free and stays free. A membership adds betas and early builds, Member Requests (ask for a brush "+ "or an alpha), a vote on what we build next and your name in the credits: opens sculptforge.app/support.html in "+ "your browser. Nothing in the app changes either way.",+ "SculptForge 免费且将一直免费。成为会员可获得 Beta 版与抢先版本、Member Requests(请求笔刷或 Alpha)、投票决定下"+ "一步开发内容,以及名列致谢名单:会在浏览器中打开 sculptforge.app/support.html。无论如何,应用程序本身都不会有任"+ "何改变。"},+ {"The official SculptForge community on Discord: questions, tips and work in progress. Opens the invite in your "+ "browser. Bugs still go to Report a problem (GitHub issues).",+ "SculptForge 官方 Discord 社区:提问、技巧与进行中的作品。会在浏览器中打开邀请链接。错误报告仍请使用“报告问题”"+ "(GitHub issues)。"},+ {"The welcome note shown the first time SculptForge starts.", "第一次启动 SculptForge 时显示的欢迎消息。"},+ {"Open the SculptForge website and user guide in your browser.", "在浏览器中打开 SculptForge 网站与使用指南。"},+ {"Open the issue tracker in your browser.", "在浏览器中打开问题追踪系统。"},+ {"Open the folder with sculptforge.log: what SculptForge did and, after a crash, what crashed. "+ "sculptforge-previous.log beside it is the last session's. Attach both to a problem report.",+ "打开含 sculptforge.log 的文件夹:记录 SculptForge 做了什么,崩溃后则记录是什么崩溃。旁边的"+ " sculptforge-previous.log 是上一次会话的记录。报告问题时请附上这两个文件。"},+ {"Record a performance trace", "录制性能追踪"},+ {"While on, sculptforge-trace.log in the log folder records what makes SculptForge slow: every frame over 33 ms "+ "with where its time went, strokes, uploads to the GPU, remeshes and other background jobs, the mesh size and "+ "levels, and the GPU and driver. Turn it on, do what is slow, turn it off and attach the file to your report. A "+ "small file on this computer only; off by default and costs nothing when off.",+ "开启时,日志文件夹中的 sculptforge-trace.log 会记录让 SculptForge 变慢的原因:每个超过 33 ms 的帧及其时间花在哪"+ "里、笔触、上传到 GPU、重新网格化与其他背景工作、网格大小与层级,以及 GPU 与驱动程序。打开它、运行变慢的操作、关"+ "闭后将文件附加到报告中。文件很小且只存在这台电脑;默认关闭,关闭时不会有任何负担。"},+ {"Submit a request for a fix or a suggestion: opens the bug report and feature request forms in your browser.",+ "提交修正请求或建议:会在浏览器中打开错误报告与功能请求表单。"},+ {"Search every command, brush and setting by name and run it. Commands that need parameters open in the console.",+ "按名称搜索任何命令、笔刷与设置并运行。需要参数的命令会在控制台中打开。"},+ {"The script console: every command you run appears as a script line, and you can type commands yourself.",+ "脚本控制台:你运行的每个命令都会以一行脚本显示,你也可以自行输入命令。"},+ {"Run a text file of script statements, one per line (# starts a comment).",+ "运行包含脚本语句的文本文件,每行一个(# 开头为注释)。"},+ {"Put every command run this session on the clipboard as a script, ready to replay (a macro recorder).",+ "将本次会话运行过的所有命令以脚本形式放到剪贴板,可直接重播(宏录制器)。"},+ {"Empty the console log (the session script is kept).", "清空控制台日志(保留会话脚本)。"},+ {"Save Layout", "保存布局"},+ {"Keep the current layout (shelves, trays, open palettes) for future sessions. Preferences and shortcuts save "+ "themselves.",+ "保留当前布局(工具栏、工具箱、打开的调色板)供之后的会话使用。偏好设置与快捷键会自动保存。"},+ {"Save Preferences Now", "立即保存偏好设置"},+ {"Write the preferences and shortcuts to disk now. Not needed: they save themselves a moment after every change.",+ "立即将偏好设置与快捷键写入磁盘。通常不需要:每次更改后它们会在片刻后自动保存。"},+ {"Reset Layout and Shortcuts", "重置布局与快捷键"},+ {"Go back to the built-in layout, shortcuts and radial menus. The shortcuts save themselves; Save Layout keeps "+ "the layout.",+ "回到内置的布局、快捷键与饼菜单。快捷键会自动保存;“保存布局”会保留布局。"},+ {"Revert to Saved Layout", "还原为已保存的布局"},+ {"Go back to the layout the last Save Layout kept.", "回到上一次“保存布局”所保留的布局。"},+ {"Import Interface...", "导入界面..."},+ {"Load a layout and shortcuts file someone shared (or you saved with Export Interface).",+ "加载别人分享(或你用“导出界面”保存)的布局与快捷键文件。"},+ {"Export Interface...", "导出界面..."},+ {"Save the layout, shortcuts and interface preferences to a file you can share.",+ "将布局、快捷键与界面偏好设置保存为可分享的文件。"},+ {"Rearrange the shelves: Ctrl+Alt+drag any button onto a shelf to add or move it, or off the shelves to remove it.",+ "重新排列工具栏:按住 Ctrl+Alt 将任何按钮拖到工具栏上即可添加或移动,拖出工具栏即可移除。"},+ {"The short notes SculptForge shows over the 3D view (a mode that is on, the next step of a tool). Off hides them "+ "all; each also has its own Don't show again.",+ "SculptForge 在 3D 视图上显示的简短提示(已打开的模式、工具的下一步)。关闭会全部隐藏;每则提示也各有“不再显示"+ "”。"},+ {"Customize Shelves", "自定义工具栏"},+ {"Preferences and shortcuts save themselves. Layout changes last until you quit; Save Layout keeps them.",+ "偏好设置与快捷键会自动保存。布局的更改会持续到你退出程序为止;“保存布局”会保留它们。"},+ {"The language of menus, palettes, shelves and messages. Brush and tool names (Quad Remesh, Forge Spheres, Clay "+ "Block...) stay as they are.",+ "菜单、调色板、工具栏与消息所使用的语言。笔刷与工命名称(Quad Remesh、Forge Spheres、Clay Block...)保持原样。"},+ {"Ctrl+hover help", "Ctrl+悬停帮助"},+ {"Help box opacity %.2f", "帮助框不透明度 %.2f"},+ {"Help box opacity", "帮助框不透明度"},+ {"How solid the Ctrl-help box is.", "Ctrl 帮助框的不透明程度。"},+ {"Hover and focus highlights change colour only: no easing, and tiles don't lift or grow.",+ "停留与焦点的醒目提示只改变颜色:没有缓动,图块也不会浮起或放大。"},+ {"Off: File and Edit come first in the palette bar and Help last, the rest A to Z. On: every palette A to Z.",+ "关闭:调色板栏中“文件”与“编辑”在最前、“帮助”在最后,其余按 A 至 Z 排列。开启:所有调色板按 A 至 Z 排列。"},+ {"Size of text and controls, applied at once. Automatic follows the display the window is on (Windows: Settings > "+ "Display > Scale, per monitor).",+ "文本与控件的大小,立即应用。“自动”会按窗口所在的显示器而定(Windows:设置 > 显示器 > 缩放,按各显示器)。"},+ {"Free: dragging turns the model about the screen's axes and can roll it over the top; press Shift while rotating "+ "to snap to the nearest front, side, top or bottom view. Turntable: the model stays upright and turns about its "+ "vertical axis, as in Blender or Maya.",+ "自由:拖动会以屏幕的轴旋转模型,并可从上方翻转;旋转时按住 Shift 可贴齐最近的正面、侧面、顶部或底部视图。转盘:"+ "模型保持直立并绕垂直轴旋转,如同 Blender 或 Maya。"},+ {"Keeps the interface below the camera notch of MacBooks (and other laptops) when SculptForge fills the screen. "+ "Automatic asks the system (macOS) or recognises a notched MacBook display (Linux).",+ "SculptForge 全屏时,让界面保持在 MacBook(及其他笔电)相机刘海下方。“自动”会询问系统 (macOS) 或辨识有刘海的"+ " MacBook 屏幕 (Linux)。"},+ {"Click, then press the new key. Esc cancels, Backspace clears. Orange: changed from the default.",+ "单击,再按下新的按键。Esc 取消,Backspace 清除。橘色:已与默认值不同。"},+ {"Undo every shortcut change.", "撤销所有快捷键更改。"},+ {"Open Library on the Project tab when SculptForge starts.", "启动 SculptForge 时在“项目”选项卡打开资源库。"},+ {"How many rows of thumbnails the Library strip shows.", "资源库条显示几行缩略图。"},+ {"Library opens along the top edge of the canvas.", "资源库沿画布上缘打开。"},+ {"Library opens above the bottom shelf.", "资源库在底部工具栏上方打开。"},+ {"Where your projects, tools, brushes, alphas, images, splats and Snapshots live. Library shows it as User.",+ "你的项目、工具、笔刷、Alpha、图像、Splat 与快照存放的位置。资源库中显示为“用户”。"},+ {"Colours", "色彩"},+ {"Forge Terminal's colour scheme, from well-known open-source terminal themes.",+ "Forge Terminal 的配色,取自知名的开源终端机主题。"},+ {"Uses your Omarchy theme's colours when Omarchy is installed (read from its theme folder; SculptForge never "+ "changes it). After switching themes, toggle this to pick up the new colours.",+ "安装 Omarchy 时使用你的 Omarchy 主题色彩(从其主题文件夹读取;SculptForge 不会修改它)。切换主题后,"+ "重新切换此选项即可应用新色彩。"},+ {"Faint scanlines and a glow around the focused panel, on the interface only (never on the 3D view). Off by "+ "default.",+ "淡淡的扫描线与焦点面板周围的光晕,只应用于界面(不会出现在 3D 视图)。默认关闭。"},+ {"The borders around the panels in Forge Terminal, Phosphor and Blueprint. Subtle (the default): faint, and "+ "nothing lights up under the pointer. Off: no borders, the gaps alone separate the panels. On: clear borders, "+ "the panel under the pointer a faint step lighter.",+ "Forge Terminal、Phosphor 与 Blueprint 中面板周围的边框。细微(默认):淡淡的,指针下不会亮起。关闭:没有边框,"+ "仅以间隙分隔面板。开启:清楚的边框,指针下的面板略亮一阶。"},+ {"How strong the panel borders are (0-100%), on top of Outlines: 100% draws them as Subtle or On does, lower "+ "fades them into the panels (#98). Ctrl+click to type.",+ "面板边框的强度 (0-100%),以“轮廓线”为基础:100% 会以细微或打开的样子绘制,较低则淡入面板 (#98)。按住 Ctrl "+ "并单击即可输入。"},+ {"SculptForge layout", "SculptForge 布局"},+ {"Menus by task (File, Edit, Sculpt, Paint, Mesh, View, Render, Help), a status bar and a one-row tool shelf. "+ "Every palette is a section of one menu, and F3 finds them all.",+ "按工作分类的菜单(文件、编辑、雕刻、绘制、网格、视图、渲染、帮助)、状态栏与单行工具栏。每个调色板都是某个菜单"+ "中的一节,按 F3 可找到全部。"},+ {"Classic", "经典"},+ {"Classic layout", "经典布局"},+ {"The alphabetical palette bar and the two-row top shelf.", "按字母排列的调色板栏与双行顶部工具栏。"},+ // --- Console.cpp (tools/i18n/coverage.py) ---+ {"Hide the console. The log and the session script are kept.", "隐藏控制台。日志与会话脚本会保留。"},+ {"Runs SculptForge script: one command per line or separated by ';', parameters as name=value (quote text with "+ "spaces). Tab completes, Up/Down recalls, help lists every command.",+ "运行 SculptForge 脚本:每行一个命令或以 ';' 分隔,参数写成 名称=值(含空格的文本请加引号)。Tab 自动补全,上"+ "/下键调出先前命令,help 列出所有命令。"},+ // --- Gizmo.cpp (tools/i18n/coverage.py) ---+ {"Draw mode: brushes sculpt and paint (leaves the Gizmo).", "绘制模式:笔刷进行雕刻与绘制(离开操纵器)。"},+ {"Gizmo, Move: drag an arrow to move along an axis, a square to move in a plane, the centre to move in the view. "+ "Masked parts stay; Shift snaps to the grid; Alt+drag moves only the gizmo. W again: back to Draw.",+ "操纵器,移动:拖动箭头沿轴移动,拖动方块在平面上移动,拖动中心在视图中移动。遮罩部分保持不动;Shift 贴齐格线;"+ "Alt+拖动只移动操纵器。再按 W:回到绘制。"},+ {"Gizmo, Scale: drag a box to stretch along an axis or the centre to scale evenly (right or up: bigger). Shift "+ "snaps to 10% steps. E again: back to Draw.",+ "操纵器,缩放:拖动方块沿轴拉伸,拖动中心等比例缩放(向右或向上:放大)。Shift 以 10% 为一级贴齐。再按 E:回到绘"+ "制。"},+ {"Gizmo, Rotate: drag a ring to turn about that axis, the outer ring to turn in the view. Mask the body and put "+ "the pivot at a joint to pose a limb. Shift snaps to 15 degrees. R again: back to Draw.",+ "操纵器,旋转:拖动圆环绕该轴旋转,拖动外环在视图中旋转。遮罩身体并将枢轴点放在关节上即可摆出肢体姿势。Shift 以 "+ "15 度贴齐。再按 R:回到绘制。"},+ {"Put the gizmo back at the centre of what moves (the Part, or its unmasked part) with world axes.",+ "将操纵器放回移动对象(部件或其未遮罩部分)的中心,并使用世界轴。"},+ {"Put the pivot on the surface: click this, then click the model (or Alt+click the model at any time). With "+ "Surface orientation the axes follow the surface there (Y along the normal).",+ "将枢轴点放到表面上:单击此处,再单击模型(或随时 Alt+单击模型)。使用“表面”方向时,轴会跟随该处的表面("+ "Y 沿法线)。"},+ {"The gizmo's axes are the world's X, Y and Z.", "操纵器的轴为世界的 X、Y 与 Z。"},+ {"The gizmo's axes follow the surface where the pivot was snapped (Y along the normal) and turn with your "+ "rotations, for moving a part along itself.",+ "操纵器的轴会跟随枢轴点贴齐处的表面(Y 沿法线),并随你的旋转而转动,方便沿部件本身移动。"},+ {"Masked parts stay where they are and partly masked parts move partly (on by default). Off: the whole Part moves "+ "whatever the mask.",+ "遮罩部分维持原位,部分遮罩的区域则部分移动(默认打开)。关闭:无论遮罩如何,整个部件都会移动。"},+ {"Transform every visible Part together. Each Part gets its own undo step.",+ "一起变换所有可见部件。每个部件各有自己的撤销步骤。"},+ {"Where the gizmo sits: rotation and scaling turn about this point. It follows the centre of what moves until you "+ "place it: Alt+drag the gizmo, Alt+click the model, To Surface, or type here.",+ "操纵器所在的位置:旋转与缩放以此点为中心。在你放置它之前,它会跟随移动对象的中心:Alt+拖动操纵器、Alt+单击模"+ "型、“到表面”,或在此输入。"},+ {"A soft joint for posing: the movement eases in over this distance from the masked part (a share of the Part's "+ "size), so a hard mask edge bends smoothly instead of creasing. 0: the mask as it is.",+ "摆姿势用的柔和关节:移动会在距遮罩部分这段距离内逐渐生效(以部件大小的比例表示),让生硬的遮罩边缘平顺弯曲而不"+ "生成折痕。0:维持遮罩原样。"},+ {"Distance to move along X, Y and Z (the gizmo's axes) when you press Apply.",+ "按“应用”时沿 X、Y、Z(操纵器的轴)移动的距离。"},+ {"Degrees to turn about X, then Y, then Z (the gizmo's axes, through the pivot) when you press Apply.",+ "按“应用”时按序绕 X、Y、Z(操纵器的轴,通过枢轴点)旋转的角度。"},+ {"Size to scale to about the pivot when you press Apply (100% = unchanged).",+ "按“应用”时以枢轴点为中心缩放到的大小(100% = 不变)。"},+ {"Move, rotate and scale by the numbers above, about the pivot, as one undo step (the transform command). Masked "+ "parts stay; with symmetry on, a masked transform is mirrored.",+ "按上方数值以枢轴点为中心移动、旋转与缩放,作为单一撤销步骤(transform 命令)。遮罩部分保持不动;打开对称时,遮"+ "罩变换会镜像。"},+ {"Set Move and Rotate back to 0 and Scale to 100%.", "将移动与旋转设回 0,比例设回 100%。"},+ // --- Input.cpp (tools/i18n/coverage.py) ---+ {"An Intensity slider under the cursor: drag it, or type a number (1-100) and press Enter. Hold Shift (or pick "+ "Smooth) to set Smooth's own Intensity.",+ "光标下的强度滑块:拖动它,或输入数字 (1-100) 后按 Enter。按住 Shift(或选择 Smooth)可设置 Smooth 自己的强度。"},+ {"Colour intensity at cursor", "光标处的色彩强度"},+ {"An Colour intensity slider under the cursor: how strongly painting colours the surface (1-100).",+ "光标下的色彩强度滑块:绘制为表面上色的强度 (1-100)。"},+ {"A Falloff slider under the cursor: below 0 a broad, hard brush tip, above 0 a soft point (-100..100). The inner "+ "ring of the brush cursor shows it.",+ "光标下的衰减滑块:低于 0 为宽而硬的笔尖,高于 0 为柔和的尖端 (-100..100)。笔刷光标的内环会显示它。"},+ {"The Quick Menu under the cursor: brush, stroke, alpha, material, colour, Size, Falloff and the intensities. "+ "Hold Space and let go to close it, or tap Space to keep it open.",+ "光标下的快速菜单:笔刷、笔触、Alpha、材质、色彩、大小、衰减与各项强度。按住空格键后放开即可关闭,或轻按空格键让"+ "它保持打开。"},+ {"Steady Stroke", "稳定笔触"},+ {"Steady Stroke on or off, with every stroke type (Dots, Drag Stamp, Slide Stamp, Spray): the brush trails the "+ "cursor on a string and only moves once the string is taut, for steady lines without hand shake.",+ "打开或关闭稳定笔触,适用所有笔触类型(Dots、Drag Stamp、Slide Stamp、Spray):笔刷以一条线跟在光标后方,线拉紧"+ "时才移动,画出不受手抖影响的稳定线条。"},+ {"Catch up on release", "放开时追上"},+ {"Steady Stroke: when you let go, the line runs on to where the cursor is, instead of stopping a string's length "+ "behind it.",+ "稳定笔触:放开时,线条会延伸到光标所在处,而不是停在落后一条线长的位置。"},+ {"Keep the brush size in model units (mm) instead of screen pixels: it stays the same on the surface as you zoom "+ "in and out, for pores, wrinkles and trims of an exact width.",+ "以模型单位 (mm) 而非屏幕像素保持笔刷大小:缩放时在表面上维持相同大小,适合精确宽度的毛孔、皱纹与饰边。"},+ {"Make the brush one pixel smaller (half a pixel below 2 px), down to 0.5 px.",+ "将笔刷缩小一个像素(低于 2 px 时为半个像素),最小 0.5 px。"},+ {"Make the brush one pixel larger (half a pixel below 2 px).", "将笔刷放大一个像素(低于 2 px 时为半个像素)。"},+ {"Continuous on or off: while you hold the brush still on the model it keeps adding, 30 dabs a second (build up a "+ "bump without moving). Not for Move, Tendril or the drag strokes.",+ "打开或关闭连续:笔刷在模型上静止时持续加入,每秒 30 个笔触(不移动也能堆出凸起)。不适用于 Move、Tendril 与拖动"+ "类笔触。"},+ {"Swap the main and the secondary colour.", "交换主要色彩与次要色彩。"},+ {"Mask the whole visible Part.", "遮罩整个可见部件。"},+ {"Unmask everything (also: Ctrl+drag on the background, away from the model).",+ "取消所有遮罩(也可以:在远离模型的背景上 Ctrl+拖动)。"},+ {"Mask what is unmasked and unmask what is masked (also: Ctrl+click the background).",+ "遮罩未遮罩的部分并取消已遮罩的部分(也可以:Ctrl+单击背景)。"},+ {"Group from Mask", "从遮罩创建组"},+ {"Turn the masked part into a new face group and clear the mask. With nothing masked, everything visible becomes "+ "one group.",+ "将遮罩部分转为新的面组并清除遮罩。若没有遮罩,所有可见部分会成为一个组。"},+ {"One face group per UV island: triangles that touch without a UV seam share a group. Only the visible part is "+ "regrouped. Needs UVs (Tool > Texture Map > Auto UV makes some).",+ "每个 UV 岛一个面组:相邻且无 UV 接缝的三角面属于同一组。只重新分组可见部分。需要 UV(工具 > 贴图 > 自动 UV "+ "可生成)。"},+ {"Classic sculpting keys", "经典雕刻按键"},+ {"The classic sculpting keys and gestures: I is Colour intensity, 9 saves a snapshot, the number keys don't pick "+ "brushes, and Ctrl+drag on the background only clears the mask.",+ "经典的雕刻按键与手势:I 为色彩强度,9 保存快照,数字键不选择笔刷,在背景上 Ctrl+拖动只会清除遮罩。"},+ {"SculptForge's own keys (the default): 1-9 and 0 pick the first ten brushes, I is Falloff (as is O), U "+ "Intensity, and Ctrl+drag on the background zooms when nothing is masked.",+ "SculptForge 自己的按键(默认):1-9 与 0 选择前十个笔刷,I 为衰减(O 亦同),U 为强度,没有遮罩时在背景上 "+ "Ctrl+拖动会缩放。"},+ {"Blender's navigation and sculpt-mode keys: middle-drag orbits (Shift pans, Ctrl zooms), Alt+left-drag does the "+ "same for pens and trackpads, Ctrl inverts a stroke, Shift smooths, F / Shift+F set radius and strength, V S P "+ "I G C K pick brushes and M the mask brush, Home frames everything. Rotation switches to Turntable.",+ "Blender 的导航与雕刻模式按键:中键拖动环绕(Shift 平移,Ctrl 缩放),Alt+左键拖动在数位笔与触摸板上效果相同,"+ "Ctrl 反转笔触,Shift 平滑,F/Shift+F 设置半径与强度,V S P I G C K 选择笔刷,M 为遮罩笔刷,Home 将全部置入视图"+ "。旋转会切换为转盘。"},+ {"Maya's view controls: Alt+left-drag orbits, Alt+middle-drag pans, Alt+right-drag zooms, anywhere on the canvas; "+ "hold Alt, then add Ctrl, and a left drag rolls the view. Alt+F frames the Part, Alt+H resets the view, the "+ "wheel zooms toward the pointer. Ctrl inverts a stroke, Ctrl+Alt masks (Ctrl+Alt+drag on the background clears "+ "the mask), Shift smooths, Ctrl+Shift hides and shows. The Classic sculpting keys stay for everything else.",+ "Maya 的视图控制:在画布任何位置 Alt+左键拖动环绕、Alt+中键拖动平移、Alt+右键拖动缩放;按住 Alt 再加 Ctrl,左键"+ "拖动可滚转视图。Alt+F 将部件置入视图,Alt+H 重置视图,滚轮朝指针缩放。Ctrl 反转笔触,Ctrl+Alt 遮罩(在背景上 "+ "Ctrl+Alt+拖动清除遮罩),Shift 平滑,Ctrl+Shift 隐藏与显示。其余一切沿用经典雕刻按键。"},+ {"Blender style: the number keys above the letters work as the numpad (1 front, 3 right, 7 top, 5 "+ "orthographic...), for keyboards without one.",+ "Blender 风格:字母上方的数字键当作小键盘使用(1 正面、3 右侧、7 顶部、5 正交...),适用于没有小键盘的键盘。"},+ {"A right click on the canvas, without dragging, opens the Quick Menu under the cursor (Space does too). A right "+ "drag still turns, pans or zooms the view. A pen button set to Right click works the same.",+ "在画布上单击右键(不拖动)会在光标下打开快速菜单(空格键也可以)。右键拖动仍会旋转、平移或缩放视图。设为“"+ "右键单击”的数位笔按钮效果相同。"},+ {"While Space is held, a drag on the canvas moves the camera: left-drag turns it, right- or middle-drag pans, and "+ "with Ctrl held too a drag zooms (#43). Off by default: with the Classic sculpting keys, Space opens the Quick "+ "Menu (with this on, a right click still does). Typing a space in a text field is never taken.",+ "按住空格键时,在画布上拖动会移动相机:左键旋转,右键或中键平移,同时按住 Ctrl 则缩放 (#43)。默认关闭:使用经典"+ "雕刻按键时,空格键会打开快速菜单(打开此选项后,右键仍可打开)。在文本字段中输入的空格不会被拦截。"},+ {"Emulate 3 Button Mouse", "模拟三键鼠标"},+ {"Blender style: Alt+left-drag always turns the view (Shift pans, Ctrl zooms), as Blender's Emulate 3 Button "+ "Mouse preference does, for pens and trackpads. Off (as Blender's default keymap, 5.1 and later): Alt+left-drag "+ "on the model masks and Ctrl+Alt+left-drag unmasks; beside the model it still turns the view (#77).",+ "Blender 风格:Alt+左键拖动始终旋转视图(Shift 平移,Ctrl 缩放),如同 Blender 的 Emulate 3 Button Mouse 偏好设"+ "置,适用于数位笔与触摸板。关闭(同 Blender 5.1 以后的默认按键配置):在模型上 Alt+左键拖动为遮罩,Ctrl+Alt+左键"+ "拖动为取消遮罩;在模型旁边仍会旋转视图 (#77)。"},+ {"A left-drag that starts on the background begins a brush stroke instead of turning the view; the brush touches "+ "the model once the cursor reaches it (#62). Ctrl (mask) and Shift (smooth) work the same way, and a Ctrl+click "+ "on the background still inverts the mask. The view still turns with a right-drag or a pen button set to Right "+ "click, pans with Alt+drag or a middle-drag, and moves with Space held if Hold Space is on; with Maya keys, "+ "Alt+left-drag orbits, with Blender keys beside the model. Shift+L (View > Lock camera) turns it on and off.",+ "从背景开始的左键拖动会开始笔触而非旋转视图;光标碰到模型时笔刷才接触模型 (#62)。Ctrl(遮罩)与 Shift(平滑)"+ "也一样,在背景上 Ctrl+单击仍会反转遮罩。视图仍可用右键拖动或设为“右键单击”的数位笔按钮旋转,用 Alt+拖动或中"+ "键拖动平移,打开“按住空格键”时按住空格键移动;使用 Maya 按键时 Alt+左键拖动环绕,使用 Blender 按键时在模型"+ "旁环绕。Shift+L(视图 > 锁定相机)可切换开关。"},+ {"Lock camera", "锁定相机"},+ {"Lock the camera for left-drags: a drag that starts on the background sculpts once it reaches the model instead "+ "of turning the view (Preferences > Input > Start strokes off the model, #62). The status bar shows CAMERA "+ "LOCKED while it is on. Right-drag or Alt+drag still move the view. Shift+L turns it on and off.",+ "锁定相机的左键拖动:从背景开始的拖动在碰到模型时会开始雕刻,而不是旋转视图(偏好设置 > 输入 > 在模型外开始"+ "笔触,#62)。开启时状态栏会显示“相机已锁定”。右键拖动或 Alt+拖动仍可移动视图。Shift+L 可切换开关。"},+ {"The brush ring lies on the model under the pointer: a circle at the brush's real size there, turned to the form "+ "of the surface (averaged over the brush, so fine bumps don't make it wobble), with a short line along the "+ "surface's direction. With symmetry on, a dot shows where each mirrored or radial copy lands. Off the model, "+ "and with this off, the ring is a flat circle on the screen.",+ "笔刷圆环贴在指针下的模型上:以该处笔刷实际大小画出的圆,按表面形状倾斜(以笔刷范围平均,细小凹凸不会让它晃动)"+ ",并有一条沿表面方向的短线。打开对称时,会以圆点显示每个镜像或放射副本的落点。在模型外或关闭此选项时,圆环是屏"+ "幕上的平面圆。"},+ {"Cursor", "光标"},+ {"While a stroke runs, show only the dot where the brush touches (and the symmetry dots), not the ring: nothing "+ "between you and the surface you are shaping. Off by default: the ring shows the brush size throughout.",+ "笔触进行时只显示笔刷接触点(与对称点),不显示圆环:你与正在塑造的表面之间不会有任何遮挡。默认关闭:圆环会一直"+ "显示笔刷大小。"},+ {"Use the keys from a keymap you exported in Blender (Preferences > Keymap > Export, a .py file). Switches to the "+ "Blender style, then takes the navigation and sculpt keys SculptForge has an equivalent for. The file is only "+ "read, never run. Saved automatically.",+ "使用你从 Blender 导出的按键配置(偏好设置 > Keymap > Export,.py 文件)。会切换到 Blender 风格,并采用 "+ "SculptForge 有对应功能的导航与雕刻按键。文件只会读取,绝不运行。自动保存。"},+ {"Paint the mask with a plain left drag, Ctrl+drag to unmask (Blender's Mask brush). Press it again, or pick "+ "another brush, to go back.",+ "以左键拖动绘制遮罩,Ctrl+拖动取消遮罩(Blender 的 Mask 笔刷)。再按一次或选择其他笔刷即可返回。"},+ {"Hide the face group under the cursor (Blender: hide the face set).",+ "隐藏光标下的面组(Blender:隐藏 face set)。"},+ {"Show only the face group under the cursor; again, with it isolated, shows everything (Blender: toggle "+ "visibility).",+ "只显示光标下的面组;在已独立显示时再按一次则显示全部(Blender:切换可见性)。"},+ {"Show every hidden part of the mesh.", "显示网格所有隐藏的部分。"},+ {"Look at the model from the front (orthographic).", "从正面看模型(正交)。"},+ {"Look at the model from behind (orthographic).", "从背面看模型(正交)。"},+ {"Look at the model's right side (orthographic).", "看模型的右侧(正交)。"},+ {"Look at the model's left side (orthographic).", "看模型的左侧(正交)。"},+ {"Look down on the model (orthographic).", "从上方俯视模型(正交)。"},+ {"Look up at the model from below (orthographic).", "从下方仰视模型(正交)。"},+ {"Gizmo size: how big the X / Y / Z axes and the View Figure are in the corner of the canvas. Grows with the UI "+ "scale.",+ "操纵器大小:画布角落的 X/Y/Z 轴与视图人偶的大小。随界面缩放而放大。"},+ {"Switch between a perspective and an orthographic view (no foreshortening: sizes don't shrink with depth).",+ "在透视与正交视图之间切换(无透视缩短:大小不随深度缩小)。"},+ {"Turn the view 15 degrees to the left around the model.", "绕模型将视图向左旋转 15 度。"},+ {"Turn the view 15 degrees to the right around the model.", "绕模型将视图向右旋转 15 度。"},+ {"Turn the view 15 degrees up over the model.", "将视图向上越过模型旋转 15 度。"},+ {"Turn the view 15 degrees down under the model.", "将视图向下绕到模型下方旋转 15 度。"},+ {"Look at the model from the other side.", "从另一侧看模型。"},+ {"Move the view closer.", "将视图拉近。"},+ {"Move the view back.", "将视图拉远。"},+ {"Fit the active Part in the view (Blender: View Selected; Maya keys: Alt+F).",+ "将当前部件置入视图(Blender:View Selected;Maya 按键:Alt+F)。"},+ {"Reset view", "重置视图"},+ {"Back to the view a new model opens with: from the front, in perspective, the whole model in view (Maya keys: "+ "Alt+H).",+ "回到打开新模型时的视图:正面、透视、整个模型在画面中(Maya 按键:Alt+H)。"},+ {"Zoom drag", "缩放拖动"},+ {"Sideways (Maya)", "左右(Maya)"},+ {"Up and down", "上下"},+ {"Alt+right drag zooms. Sideways (the default, as Maya's own dolly): drag right to zoom in, left to zoom out. Up "+ "and down: drag up to zoom in, as the SculptForge style.",+ "Alt+右键拖动可缩放。左右(默认,如 Maya 的推拉):向右拖动拉近,向左拖动拉远。上下:向上拖动拉近,如 "+ "SculptForge 风格。"},+ {"Invert zoom", "反转缩放"},+ {"Turn zoom drags around (the mouse wheel stays as it is).", "反转缩放拖动方向(鼠标滚轮维持不变)。"},+ {"Wheel zooms toward the pointer", "滚轮朝指针缩放"},+ {"The mouse wheel zooms toward the point of the model under the pointer, which stays under it, instead of the "+ "middle of the view. On with Maya keys (choosing a style sets it), off with the others.",+ "鼠标滚轮会朝指针下的模型位置缩放,该点维持在指针下,而不是朝视图中央。使用 Maya 按键时打开(选择风格时会自动设"+ "置),其他风格则关闭。"},+ {"Along the normal", "沿法线"},+ {"Always", "始终"},+ {"Never", "永不"},+ {"Move, Tendril, Elastic Tendril and KelvinGrab: with the invert key held as the stroke begins (Alt; Ctrl in the "+ "Blender and Maya styles), the surface moves along the average normal under the brush instead of across the "+ "screen, so it pulls straight out of the surface or pushes straight in. Always: every stroke of those brushes "+ "does; Never: the key does nothing for them.",+ "Move、Tendril、Elastic Tendril 与 KelvinGrab:笔触开始时按住反转键(Alt;在 Blender 与 Maya 风格中为 Ctrl),表"+ "面会沿笔刷下的平均法线移动,而非沿屏幕移动,因此会从表面直直拉出或推入。始终:这些笔刷的每一笔都如此;永不:该"+ "按键对它们没有作用。"},+ {"Share size and intensity across brushes", "笔刷之间共用大小与强度"},+ {"Free", "自由"},+ {"Free: the model turns about the screen's axes and can roll over the top. Turntable: it stays upright, as in "+ "Blender or Maya.",+ "自由:模型以屏幕的轴旋转,并可从上方翻转。转盘:模型保持直立,如同 Blender 或 Maya。"},+ {"The pointer over the 3D view: a crosshair (the default, as in most sculpting apps; it stays while the view "+ "turns) or the arrow. Panels, menus and popups always show the arrow (or their own resize and text cursors). "+ "Saved automatically.",+ "3D 视图上的指针:十字线(默认,与大多数雕刻软件相同;旋转视图时仍保留)或箭头。面板、菜单与弹出窗口始终显示箭头"+ "(或它们自己的调整大小与文本光标)。自动保存。"},+ {"Brush radius in screen pixels (0.5 to 800), and in mm on the surface.",+ "以屏幕像素表示的笔刷半径(0.5 到 800),以及表面上的 mm。"},+ {"Below 0: a broad, hard tip. Above 0: a soft point.", "低于 0:宽而硬的笔尖。高于 0:柔和的尖端。"},+ {"How strongly the brush changes the surface.", "笔刷改变表面的强度。"},+ {"Colour intensity %.0f", "色彩强度 %.0f"},+ {"Colour intensity", "色彩强度"},+ {"How strongly painting colours the surface.", "绘制为表面上色的强度。"},+ // --- LibraryBrowser.cpp (tools/i18n/coverage.py) ---+ {"Library tabs", "资源库选项卡"},+ {"What the Library shows: projects, models, brushes, alphas, materials, images, splats, snapshots, recent files "+ "and packs.",+ "资源库显示的内容:项目、模型、笔刷、Alpha、材质、图像、Splat、快照、最近使用的文件与资源包。"},+ {"Hide the Library (comma toggles it; Esc closes it).", "隐藏资源库(逗号键切换;Esc 关闭)。"},+ {"Open the Library on the Project tab when SculptForge starts.", "启动 SculptForge 时在“项目”选项卡打开资源库。"},+ {"Rows of thumbnails in the Library strip.", "资源库条中的缩略图行数。"},+ {"Show the Library along the top or the bottom of the canvas.", "在画布上方或下方显示资源库。"},+ {"Show or hide the Library: thumbnails of your projects, models, brushes, alphas, materials, images, splats and "+ "Snapshots along the top of the canvas. Double-click to load.",+ "显示或隐藏资源库:沿画布上缘排列你的项目、模型、笔刷、Alpha、材质、图像、Splat 与快照的缩略图。双击即可加载。"},+ {"Pop up every brush under the cursor. Type the first letter of a brush, then the orange letter on its tile (B S "+ "T = Standard).",+ "在光标下弹出所有笔刷。输入笔刷的第一个字母,再输入其图块上的橘色字母(B S T = Standard)。"},+ {"Pop up the stroke types: Dots, Drag Stamp, Slide Stamp, Spray and Lazy Stroke.",+ "弹出笔触类型:Dots、Drag Stamp、Slide Stamp、Spray 与 Lazy Stroke。"},+ {"Pop up the brush alphas: built-in stamps and images from your library.",+ "弹出笔刷 Alpha:内置印章与资源库中的图像。"},+ {"Pop up the materials under the cursor. Hover one to preview it on the model; click to keep it.",+ "在光标下弹出材质。停在某个材质上即可在模型上预览;单击即可应用。"},+ {"Size at cursor", "光标处的大小"},+ {"A Size slider under the cursor: drag it, or type a number and press Enter.",+ "光标下的大小滑块:拖动它,或输入数字后按 Enter。"},+ {"Save a timestamped snapshot of the whole scene to your library (the last 10 are kept). Your project file is not "+ "changed. Find them in the Library's Snapshots tab.",+ "将整个场景加上时间戳的快照保存到资源库(保留最近 10 个)。你的项目文件不会更改。可在资源库的“快照”选项卡找到。"},+ {"Save Render", "保存渲染"},+ {"Render the view (without the interface) to an image in your library: Library > Image lists it, and the status "+ "bar names the file. Material sets its size (twice the view by default), shape (the view's, 1:1, 16:9, 9:16, "+ "4:3) and format (PNG or JPG).",+ "将视图(不含界面)渲染为资源库中的图像:资源库 > 图像会列出它,状态栏会显示文件名。“材质”设置其大小(默认为视图"+ "的两倍)、比例(视图、1:1、16:9、9:16、4:3)与格式(PNG 或 JPG)。"},+ // --- MemoryConfirm.cpp (tools/i18n/coverage.py) ---+ {"Not enough free memory", "可用内存不足"},+ {"If the computer runs out of memory it can stop responding and SculptForge may close without saving. Close other "+ "apps (or save first) before you go on.",+ "如果电脑内存耗尽,可能会无响应,SculptForge 也可能未保存就关闭。继续之前请关闭其他应用程序(或先保存)。"},+ {"Continue anyway", "仍要继续"},+ // --- Palettes.cpp (tools/i18n/coverage.py) ---+ {"Brushes subtract instead of add. Holding Alt flips it for one stroke.",+ "笔刷改为减去而非增加。按住 Alt 可在单一笔触中反转。"},+ {"Connected only", "仅限相连"},+ {"View falloff", "视图衰减"},+ {"The Smooth brush (and Shift) removes bumps without shrinking the form, instead of the plain smooth that also "+ "flattens it. Either way, let go of Shift while still pressing a Shift-smooth stroke to switch to the other "+ "smooth for the rest of the stroke.",+ "Smooth 笔刷(与 Shift)会去除凹凸而不使形体缩小,而非同时压平形体的普通平滑。无论哪种,在 Shift 平滑笔触进行中"+ "放开 Shift,笔触剩余部分就会切换为另一种平滑。"},+ {"The Smooth brush (and Shift) straightens the borders between face groups and leaves everything else alone: a "+ "jagged clothing edge, a cuff or a panel line becomes a clean line along the surface. Corners where three "+ "groups meet stay where they are.",+ "Smooth 笔刷(与 Shift)会拉直面组之间的边界,其余部分不变:锯齿状的衣物边缘、袖口或面板线会变成沿表面的干净"+ "线条。三个组交会的角落保持原位。"},+ {"Brush radius in screen pixels (0.5 to 800), and in mm on the surface under the cursor. [ and ] change it by "+ "10%, Shift+[ and Shift+] by 1 px; Ctrl+Shift+right-drag scrubs it finely.",+ "以屏幕像素表示的笔刷半径(0.5 到 800),以及光标下表面上的 mm。[ 与 ] 每次调整 10%,Shift+[ 与 Shift+] 每次 1 "+ "px;Ctrl+Shift+右键拖动可细微调整。"},+ {"The brush falloff: below 0 a broad, hard tip, above 0 a soft point. The brush cursor's inner ring shows where "+ "the brush works at half strength.",+ "笔刷衰减:低于 0 为宽而硬的笔尖,高于 0 为柔和的尖端。笔刷光标的内环显示笔刷以一半强度作用的位置。"},+ {"Off (the default): the triangle size follows the brush size on screen, as in Dynamic Topology. On: one size for "+ "the whole mesh, set by Detail. A preference (saved automatically).",+ "关闭(默认):三角面大小跟随屏幕上的笔刷大小,如同动态拓扑。开启:整个网格使用单一大小,由“细节”设置。这是偏"+ "好设置(自动保存)。"},+ {"Smooth remesh", "平滑时重新网格化"},+ {"How much Smooth (Shift) changes the topology while Dynamic is on. 100 (the default): it also simplifies, "+ "merging triangles toward twice the size. Lower: it remeshes less. 0: Smooth only smooths and the triangles "+ "stay as they are. A preference (saved automatically).",+ "打开“动态”时,Smooth (Shift) 改变拓扑的程度。100(默认):也会简化,将三角面合并至约两倍大小。较低:重新网格"+ "化较少。0:Smooth 只平滑,三角面保持不变。这是偏好设置(自动保存)。"},+ {"The viewport's lens, as on a full-frame camera: short (15-35 mm) exaggerates perspective, long (85-300 mm) "+ "flattens it, which helps judge proportions. Saved with the project; Ctrl+click to type.",+ "视口的镜头,如同全片幅相机:短焦 (15-35 mm) 会夸大透视,长焦 (85-300 mm) 则压平透视,有助于判断比例。随项目保"+ "存;按住 Ctrl 并单击即可输入。"},+ {"Show the X / Y / Z directions in the corner of the canvas.", "在画布角落显示 X/Y/Z 方向。"},+ {"View Figure", "视图人偶"},+ {"Show a small shaded head in the corner of the canvas that turns with the view. Click it to look from the "+ "nearest side (front, back, left, right, top or bottom).",+ "在画布角落显示随视图转动的小型着色头部。单击即可从最近的一侧观看(正面、背面、左、右、上或下)。"},+ {"Gizmo size", "操纵器大小"},+ {"AI features are off (Preferences > AI): Relief, Inflate and Stamp work offline.",+ "AI 功能已关闭(偏好设置 > AI):浮雕、膨胀与压印可脱机使用。"},+ {"A sketch, concept, logo, photo or height map (or drop one on the window).",+ "草图、概念图、标志、照片或高度图(或拖放到窗口中)。"},+ {"Light areas rise: logos, coins, emblems, height maps.", "亮部会隆起:标志、硬币、徽章、高度图。"},+ {"Inflates the outline into a rounded blockout.", "将轮廓膨胀成圆润的粗模。"},+ {"Projects the image onto the model from this view as surface detail.",+ "从此视角将图像投影到模型上,成为表面细节。"},+ {"Integrations", "集成"},+ {"Support", "支持"},+ {"X-Ray", "X 光"},+ {"View resolution", "视图分辨率"},+ {"Decimate leaves masked vertices where they are, so masked areas keep their triangles exactly; the rest is "+ "decimated around them.",+ "减面会让遮罩顶点维持原位,因此遮罩区域完整保留其三角面;其余部分则在其周围减面。"},+ {"Remeshing in the background (with a painted texture: Auto UV of the new surface, then the texture projected "+ "onto it). The result replaces the Part when it's done.",+ "正在后台重新网格化(有绘制贴图时:先为新表面自动 UV,再将贴图投影上去)。完成后结果会替换部件。"},+ {"Tool > Remesh", "工具 > 重新网格化"},+ {"Cut", "切割"},+ {"Selection Sets", "选择集"},+ {"Backface culling", "背面剔除"},+ {"Don't draw the back faces of the model: faster on dense meshes, and you see through the openings of open meshes "+ "(a scan, a garment) instead of their inside. Brushes then work only on faces you can see. Off by default; "+ "saved automatically, projects keep their own.",+ "不绘制模型的背面:在高密度网格上更快,且能通过开放网格(扫描、衣物)的开口看出去,而不是看到其内部。此时笔刷只"+ "作用于看得到的面。默认关闭;自动保存,项目会保有自己的设置。"},+ {"Radial Copies %d", "放射副本 %d"},+ {"Radial Copies", "放射副本"},+ {"How many copies radial symmetry makes of every stroke, turned evenly around the axis (2 to 64). With X, Y or Z "+ "on too, each mirror image gets its copies.",+ "放射对称为每一笔触创建的副本数量,平均分布在轴周围(2 到 64)。同时打开 X、Y 或 Z 时,每个镜像也会有自己的副本"+ "。"},+ // --- PanelAi.cpp (tools/i18n/coverage.py) ---+ {"Enable AI features", "启用 AI 功能"},+ {"Brush Lab: describe a brush in words and AI builds it; tweak the recipe with sliders.",+ "Brush Lab:用文本描述笔刷,AI 就会创建它;再以滑块微调配方。"},+ {"Turn an image or a description into a sculptable model (Hugging Face, fal.ai, Meshy, ComfyUI or offline).",+ "将图像或描述转为可雕刻的模型(Hugging Face、fal.ai、Meshy、ComfyUI 或脱机)。"},+ // --- PanelBake.cpp (tools/i18n/coverage.py) ---+ {"Bake the chosen maps from the source Part(s), or this Part's own top subdivision or micro level, onto its UVs, "+ "in the background. Maps are saved as PNGs (displacement also as a 32-bit EXR, position as a 16-bit PNG) in the "+ "output folder, one set per UDIM tile when the UVs use them, and the normal map shows on the model.",+ "在后台将所选贴图从来源部件,或此部件自己的最高细分层级或微细分层级,烘焙到其 UV 上。贴图以 PNG 保存在输出文件"+ "夹(位移另存为 32 位 EXR,位置为 16 位 PNG),UV 使用 UDIM 时每个图块一组,法线贴图会显示在模型上。"},+ {"Stop the bake that is running. Nothing is written.", "停止运行中的烘焙。不会写入任何文件。"},+ {"Show the baked tangent-space normal map on the low-poly in the viewport (decoded with the same MikkTSpace "+ "tangents a game engine uses), to check it against the high-poly. Turn it off to see the bare low-poly.",+ "在视口中将烘焙好的切线空间法线贴图显示在低模上(使用与游戏引擎相同的 MikkTSpace 切线解码),以便与高模比对。关"+ "闭即可看到原始低模。"},+ {"Open the folder the last bake wrote its maps to.", "打开上次烘焙写入贴图的文件夹。"},+ {"Choose the folder baked maps are written to. Empty: beside your last export, else the project's folder, else "+ "Bakes in your library folder.",+ "选择烘焙贴图的写入文件夹。留空:上次导出的位置旁,否则为项目文件夹,再否则为资源库文件夹中的 Bakes。"},+ {"Maps are baked onto the active Part's UVs: make the low-poly active (it needs UVs from import or from Auto UV "+ "in Tool > Texture Map), and keep the high-poly Part(s) visible.",+ "贴图会烘焙到当前部件的 UV 上:将低模设为当前(需要导入时的 UV,或工具 > 贴图中的自动 UV),并让高模部件保持可"+ "见。"},+ {"The high-poly to bake from: one Part, or every visible Part except the active one (the low-poly), or this "+ "Part's own top subdivision level baked onto its lowest level, or its micro level baked onto its base. Hidden "+ "faces of the source are ignored. UVs outside 0..1 bake as UDIM tiles (name.1001.png, ...).",+ "要烘焙的高模来源:单一部件,或除当前部件(低模)外的所有可见部件,或将此部件的最高细分层级烘焙到最低层级,或将"+ "其微细分层级烘焙到基底。来源的隐藏面会被忽略。0..1 以外的 UV 会烘焙为 UDIM 图块(name.1001.png, ...)。"},+ {"Width and height of the maps: 1K, 2K (the default), 4K or 8K. Bake time and memory grow with the area (an 8K "+ "bake holds about 200 MB per map while it runs).",+ "贴图的宽度与高度:1K、2K(默认)、4K 或 8K。烘焙时间与内存随面积增加(8K 烘焙运行时每张贴图约占 200 MB)。"},+ {"AA %.0fx", "抗锯齿 %.0fx"},+ {"Supersampling: n x n rays per texel, averaged. 1 is fastest; 2 (the default) gives clean edges; 4 costs 16 rays "+ "per texel.",+ "超采样:每个纹素 n x n 条光线取平均。1 最快;2(默认)边缘干净;4 每个纹素需 16 条光线。"},+ {"Measure how far the high-poly lies in front of and behind the low-poly before baking, and cast rays just that "+ "far. Turn it off to set Front and Rear yourself (e.g. when rays hit a nearby part).",+ "烘焙前先测量高模位于低模前后的距离,并只投影到该距离。关闭即可自行设置前方与后方(例如光线碰到附近的部件时)。"},+ {"How far in front of the low-poly rays start, as a percentage of the model's size (its bounding-box diagonal). "+ "Raise it when details that stick out come out flat or missing.",+ "光线从低模前方多远开始,以模型大小(其边界框对角线)的百分比表示。凸出的细节变平或遗失时请调高。"},+ {"How far behind the low-poly rays look, as a percentage of the model's size. Raise it when carved detail is "+ "missing; lower it when rays reach the far side of thin parts.",+ "光线往低模后方看多远,以模型大小的百分比表示。雕刻凹陷的细节遗失时请调高;光线碰到薄部件另一侧时请调低。"},+ {"Texels filled around each UV island with the island's edge colours, so seams don't show once the maps are "+ "mipmapped in an engine. 8 is plenty for 2K; use more for 4K and 8K.",+ "以 UV 岛边缘色彩填满每个岛周围的纹素,让贴图在引擎中生成 mipmap 后不会露出接缝。2K 用 8 就够;4K 与 8K 请用更多"+ "。"},+ {"OpenGL (green up) suits Blender, Unity, Godot and Substance. DirectX (green down) is Unreal's native "+ "convention; Send to Unreal flips an OpenGL map on import, so either works there.",+ "OpenGL(绿色朝上)适用于 Blender、Unity、Godot 与 Substance。DirectX(绿色朝下)是 Unreal 的原生惯例;“发送至 "+ "Unreal”会在导入时翻转 OpenGL 贴图,所以两者在那里都可用。"},+ {"Rays per texel for ambient occlusion: more is smoother and slower.",+ "环境光屏蔽每个纹素的光线数:越多越平滑也越慢。"},+ {"How far away geometry still occludes, as a percentage of the model's size. Short: only creases darken. Long: "+ "whole cavities and the insides of shapes darken too.",+ "多远的几何仍会生成屏蔽,以模型大小的百分比表示。短:只有折痕变暗。长:整个凹洞与形体内侧也会变暗。"},+ {"Where the maps are written, as <Part>_normal.png, _ao.png, _displacement.png (+ .exr) and so on. Empty: beside "+ "your last export, else the project's folder, else Bakes in your library folder.",+ "贴图的写入位置,文件名如 <Part>_normal.png、_ao.png、_displacement.png(+ .exr)等。留空:上次导出的位置旁,否则"+ "为项目文件夹,再否则为资源库文件夹中的 Bakes。"},+ {"Also write the displacement as a 32-bit float OpenEXR in world units (for renderers that take real distances). "+ "The 16-bit PNG is always written.",+ "另将位移以世界单位写成 32 位浮点 OpenEXR(适用于使用实际距离的渲染器)。16 位 PNG 始终会写入。"},+ {"Baking on every core in the background; you can keep working.", "正在后台使用所有核心烘焙;你可以继续工作。"},+ // --- PanelBlender.cpp (tools/i18n/coverage.py) ---+ {"Load what Blender sends as soon as it arrives (checked once a second). Off: use Receive from Blender.",+ "Blender 传来的内容一到就加载(每秒检查一次)。关闭:请使用“从 Blender 接收”。"},+ // --- PanelBrushes.cpp (tools/i18n/coverage.py) ---+ {"Follow stroke direction", "跟随笔触方向"},+ {"The alpha turns with the stroke: its top points the way you are drawing, for scales, stitches and hair that "+ "line up along the stroke. Small wobbles are smoothed out (the direction is taken every 20 pixels, as Blender's "+ "Rake does). Angle still adds its turn.",+ "Alpha 会随笔触转动:其顶端指向你绘制的方向,适合沿笔触排列的鳞片、缝线与毛发。细小的晃动会被平滑(每 20 像素取"+ "一次方向,如同 Blender 的 Rake)。“角度”仍会加上其旋转。"},+ {"Turn the alpha by a fixed angle in degrees (counter-clockwise); Ctrl+click to type.",+ "将 Alpha 旋转固定角度(逆时针,单位为度);按住 Ctrl 并单击即可输入。"},+ {"Angle jitter %.0f", "角度抖动 %.0f"},+ {"The stamp turns with you: with Drag Stamp its top points the way you drag; in a dots stroke it turns along "+ "the stroke. Off, Drag Stamp only sets the size and the stamp keeps Angle's turn. Slide Stamp never turns "+ "while you slide it.",+ "印章会跟着你转动:使用 Drag Stamp 时,其顶端指向你拖动的方向;在点状笔触中则沿笔触转动。关闭时,Drag Stamp 只"+ "设置大小,印章保持“角度”的旋转。Slide Stamp 滑动时永不转动。"},+ {"Angle jitter", "角度抖动"},+ {"Turn each dab by a random angle, up to this many degrees either way: breaks up repeats in skin, rock and noise "+ "alphas.",+ "将每个笔触随机旋转,向两侧最多此角度:打破皮肤、岩石与噪波 Alpha 的重复感。"},+ {"Tile across %.0f", "横向重复 %.0f"},+ {"Tile across", "横向重复"},+ {"Repeat the alpha this many times across the brush (1 = once).", "在笔刷横向重复 Alpha 的次数(1 = 一次)。"},+ {"Tile down %.0f", "纵向重复 %.0f"},+ {"Tile down", "纵向重复"},+ {"Repeat the alpha this many times down the brush (1 = once).", "在笔刷纵向重复 Alpha 的次数(1 = 一次)。"},+ // --- PanelCut.cpp (tools/i18n/coverage.py) ---+ {"Depth", "深度"},+ // --- PanelExtract.cpp (tools/i18n/coverage.py) ---+ {"Smooths the extracted edge, which otherwise follows the mask's triangles in steps (0 = as masked).",+ "平滑提取的边缘,否则它会沿着遮罩三角面呈阶梯状(0 = 维持遮罩原样)。"},+ {"Thickness of the shell, as a fraction of the Part's size (0.015 is 1.5%). Negative grows it inward; 0 makes a "+ "single-sided surface.",+ "外壳的厚度,以部件大小的比例表示(0.015 为 1.5%)。负值向内长;0 会创建单面表面。"},+ {"Deformation > Smooth smooths without shrinking the form (Taubin smoothing) instead of the plain smooth, which "+ "also shrinks it.",+ "变形 > 平滑会在不缩小形体的情况下平滑(Taubin 平滑),而非同时使形体缩小的普通平滑。"},+ // --- PanelFace.cpp (tools/i18n/coverage.py) ---+ {"Give the active Part (a humanoid head, looking down +Z in the front view) the 52 Apple ARKit blend shapes as "+ "sculpt layers: eyeBlinkLeft, jawOpen, mouthSmileRight and the rest, fitted to this head's proportions. Then "+ "fix any of them by sculpting into its layer (Tool > Layers), test them with the presets below, export them as "+ "morph targets (GLB, USD, FBX, Blender) or drive them live from your phone. The landmarks you placed (at least "+ "3) guide the fit; otherwise it finds the face by itself. Eyes, teeth and tongue Parts (by name) and Parts on "+ "the face get the shapes they need. Running it again replaces the 52 layers (undo brings back the old ones and "+ "the fixes sculpted into them).",+ "为当前部件(人形头部,在正视图中朝向 +Z)加入 52 个 Apple ARKit 混合形状作为雕刻图层:eyeBlinkLeft、jawOpen、m"+ "outhSmileRight 等,并按此头部的比例拟合。之后可在其图层中雕刻修正任何形状(工具 > 图层),用下方的预设测试,导出"+ "为 morph target(GLB、USD、FBX、Blender),或用手机实时驱动。你放置的特征点(至少 3 个)会引导拟合;否则会自动"+ "找出脸部。眼睛、牙齿与舌头部件(按名称)以及脸上的部件会得到所需的形状。再次运行会替换这 52 个图层(可撤销恢复"+ "旧图层及其中雕刻的修正)。"},+ {"Guide the fit for heads it gets wrong (stylised proportions, a turned head, a bust with big shoulders): click "+ "the eye corners, the nose tip, the mouth corners and the chin on the sculpt, in the order the canvas asks. "+ "Right and left are the character's own (its right eye is on your left in the front view). Click a dot again "+ "later to move it. 3 are enough to start; all 8 fit best. Auto places them all for you to check.",+ "为拟合失准的头部提供引导(风格化比例、转向的头、肩膀宽大的半身像):按画布要求的顺序,在雕刻上单击眼角、鼻尖"+ "、嘴角与下巴。左右以角色本身为准(正视图中角色的右眼在你的左边)。之后再单击圆点即可移动。3 个就能开始;8 个"+ "全放拟合最佳。“自动”会替你全部放好供你检查。"},+ {"Find the landmarks automatically (the same fit Generate makes without landmarks) and show them, so you can "+ "check where the eye and mouth corners landed and move any that are off before generating.",+ "自动找出特征点(与没有特征点时“生成”所做的拟合相同)并显示,让你在生成前检查眼角与嘴角的位置,并移动偏离的点"+ "。"},+ {"Remove the landmarks: Generate then finds the face by itself.", "移除特征点:之后“生成”会自动找出脸部。"},+ {"Play a recorded face take on the facial shapes: the JSON frames the phone link records ({\"type\":\"face\", "+ "\"t\":ms, \"weights\":{...}} as an array, {\"frames\":[...]} or JSON Lines).",+ "在脸部形状上播放录制的脸部录制片段:手机链接录制的 JSON 帧({\"type\":\"face\", \"t\":ms, \"weights\":{...}} 数组"+ "、{\"frames\":[...]} 或 JSON Lines)。"},+ {"Play or pause the loaded take (it loops while Loop is on).",+ "播放或暂停已加载的录制片段(打开“循环”时会重复播放)。"},+ {"Bake the loaded take into keyframes at 30 fps: Export GLB writes them as a glTF animation of the morph target "+ "weights, Export USD as time samples (Blender, Maya, Unreal, Omniverse play them). Saved with the project.",+ "将已加载的录制片段以 30 fps 烘焙为关键帧:“导出 GLB”会写成 morph target 权重的 glTF 动画,“导出 USD”则写成时"+ "间采样(Blender、Maya、Unreal、Omniverse 可播放)。随项目保存。"},+ {"Remove the baked take, so exports are a still pose again.", "移除已烘焙的录制片段,让导出再次成为静态姿势。"},+ {"Auto: Left and Right shapes are made exact mirror images when the sculpt is symmetric about X = 0. On: always "+ "(asymmetric spots take the average). Off: each side as fitted.",+ "自动:雕刻相对 X = 0 对称时,Left 与 Right 形状会成为完全镜像。开启:始终如此(不对称处取平均)。关闭:每侧维持"+ "拟合结果。"},+ {"Eyes (Parts named Eye...) turn for the eyeLook shapes, Teeth / Tongue follow the jaw below the bite (and "+ "tongueOut), and other Parts on the face (brows, lashes, a beard) follow the skin.",+ "眼睛(名为 Eye... 的部件)会随 eyeLook 形状转动,Teeth/Tongue 会在咬合线下方跟随下腭(以及 tongueOut),脸上的"+ "其他部件(眉毛、睫毛、胡子)会跟随皮肤。"},+ {"How strongly the presets above are applied (click a preset again to see it).",+ "上方预设应用的强度(再单击预设即可查看)。"},+ {"This ARKit shape's weight (it drives the same-named layer on every Part). To fix the shape, select its layer in "+ "Tool > Layers, set the weight to 1 and sculpt.",+ "此 ARKit 形状的权重(驱动每个部件上同名的图层)。若要修正形状,请在工具 > 图层中选择其图层,将权重置为 1 后雕刻"+ "。"},+ {"Play the take again from the start when it ends.", "录制片段结束时从头再播放一次。"},+ // --- PanelFill.cpp (tools/i18n/coverage.py) ---+ {"Fill Layers", "填充图层"},+ {"New Fill Layer", "添加填充图层"},+ {"Add a Fill layer: a material over the whole Part through a mask you build from effects (Edge Wear, Dirt, "+ "Gradient, Thickness, Light Direction, Noise, a painted mask, Levels, Blur, Invert). Change it any time; it "+ "follows the sculpt.",+ "添加填充图层:通过你以效果创建的遮罩,将材质覆盖整个部件(Edge Wear、Dirt、Gradient、Thickness、Light "+ "Direction、Noise、绘制遮罩、Levels、Blur、Invert)。可随时修改;会跟随雕刻。"},+ {"Material Recipe", "材质配方"},+ {"Lay a ready-made stack of Fill layers on the Part: Worn Metal, Painted Edges, Dirt and Dust, Rusted Iron. They "+ "read the Part's Mesh Maps, so each model wears where it would. Undoable.",+ "在部件上应用现成的填充图层堆栈:Worn Metal、Painted Edges、Dirt and Dust、Rusted Iron。它们读取部件的 Mesh "+ "Maps,让每个模型在该磨损的地方磨损。可撤销。"},+ {"Baking Mesh Maps...", "正在烘焙 Mesh Maps..."},+ {"No Mesh Maps yet", "尚无 Mesh Maps"},+ {"Mesh Maps", "Mesh Maps"},+ {"Ambient occlusion, curvature, thickness, position, world normal and ID of the Part on its texture's UVs, which "+ "Fill layers read. Baked in the background when a Fill layer needs them; with Live on, the tiles near what you "+ "sculpt are baked again after each stroke.",+ "部件在其贴图 UV 上的环境光屏蔽、曲率、厚度、位置、世界法线与 ID,供填充图层读取。填充图层需要时会在后台烘焙;"+ "打开“实时”时,每一笔触后会重新烘焙你雕刻处附近的图块。"},+ {"Fill colour", "填充色彩"},+ {"The base colour the Fill layer lays down.", "填充图层铺上的基础色彩。"},+ {"Paint on the model with this layer active (Alt erases)", "以此图层为当前在模型上绘制(Alt 擦除)"},+ {"Add mask effect", "添加遮罩效果"},+ {"Add an effect to the bottom of the mask stack. Generators read the Mesh Maps: Edge Wear (convex edges), Dirt "+ "(crevices), Gradient, Thickness (thin parts), Light Direction (surfaces facing up). Noise is in 3D, so it has "+ "no UV seams. Paint lets you paint the mask with the Paint brush.",+ "在遮罩堆栈底部加入效果。生成器读取 Mesh Maps:Edge Wear(凸出边缘)、Dirt(缝隙)、Gradient、Thickness(薄的部"+ "分)、Light Direction(朝上的表面)。Noise 是 3D 的,因此没有 UV 接缝。Paint 让你用 Paint 笔刷绘制遮罩。"},+ // --- PanelForgeSpheres.cpp (tools/i18n/coverage.py) ---+ {"Add a Forge Sphere Part: one root sphere to block out a body, creature or plant from. Drag on a sphere to grow "+ "limbs from it, Move and Scale them into proportion, check the skin with Preview (A), then Make Mesh.",+ "添加 Forge Sphere 部件:一个根球体,用来打出身体、生物或植物的粗模。在球体上拖动即可长出肢体,用移动与缩放调整"+ "比例,以预览 (A) 检查外皮,再“创建网格”。"},+ {"Drag on a sphere to grow a new sphere from it (how far you drag sets its size). Click a link between two "+ "spheres to add a joint there, and drag to place it. Alt+click a sphere to delete it.",+ "在球体上拖动即可从它长出新球体(拖动距离决定大小)。单击两球体间的链接可在该处加入关节,拖动即可放置。Alt+"+ "单击球体即可删除。"},+ {"Drag a sphere to move it; the links stretch to follow. Symmetry moves its mirror twin too.",+ "拖动球体即可移动;链接会伸展跟随。对称时其镜像也会一起移动。"},+ {"Drag a sphere up or right to make it bigger, down or left to make it smaller.",+ "将球体向上或向右拖动可放大,向下或向左拖动可缩小。"},+ {"Drag places child", "拖动放置子球"},+ {"Draw: dragging on a sphere moves the new sphere away from it (one drag places a limb joint) instead of sizing "+ "it. Off, hold Ctrl while you drag for the same.",+ "绘制:在球体上拖动会让新球体远离它(一次拖动放置一个肢体关节),而不是调整大小。关闭时,拖动时按住 Ctrl 效果相"+ "同。"},+ {"Delete Selected", "删除所选"},+ {"Delete the selected sphere (the one you last clicked or added, outlined in orange) and everything growing from "+ "it. The root stays.",+ "删除所选球体(你最后单击或添加的那个,以橘色包围框标记)及从它长出的一切。根球体保留。"},+ {"Insert Between", "插入中间"},+ {"Add a joint halfway along the link from the selected sphere to the one it grows from.",+ "在所选球体与其母球体之间链接的中点加入关节。"},+ {"Set as Root", "设为根"},+ {"Make the selected sphere the root: the armature keeps its shape and grows from there (the links on the way turn "+ "around).",+ "将所选球体设为根:骨架保持形状并从该处长出(途中的链接会反向)。"},+ {"Show the skin Make Mesh would build instead of the spheres. Turn it off to edit the spheres again.",+ "显示“创建网格”将创建的外皮,而非球体。关闭即可再次编辑球体。"},+ {"Build the skin as a new, sculptable Part right below (watertight quads, one face group per link), like Make "+ "Adaptive Skin. The Forge Sphere Part is hidden and kept: show it to change the proportions and make a new mesh.",+ "在正下方将外皮创建为新的可雕刻部件(封闭四边面,每个链接一个面组),类似 Make Adaptive Skin。Forge Sphere 部"+ "件会被隐藏并保留:显示它即可修改比例并创建新网格。"},+ {"How dense Make Mesh's skin is: cells across the model's longest side. 128 suits a blockout; raise it for thin "+ "fingers or tails.",+ "“创建网格”外皮的密度:沿模型最长边的格数。128 适合粗模;细手指或尾巴请调高。"},+ {"Forge Sphere insert", "插入 Forge Sphere"},+ {"Forge Sphere add", "添加 Forge Sphere"},+ // --- PanelGeometry.cpp (tools/i18n/coverage.py) ---+ {"The subdivision level to sculpt at: 1 is the base cage, the highest has the finest detail. D / Shift+D step up "+ "/ down. Detail is kept on every level.",+ "要雕刻的细分层级:1 为基础笼,最高层级细节最精细。D/Shift+D 提高/降低。每个层级都会保留细节。"},+ {"Micro levels above the highest subdivision level: each 4x the triangles, stored as one 16-bit displacement per "+ "point (no mesh), so 300 million triangles take about 0.4 GB and sculpt in real time. Move reshapes the level "+ "below and the detail rides along.",+ "最高细分层级之上的微细分层级:每级三角面为 4 倍,每个点以一个 16 位位移保存(没有网格),因此 3 亿个三角面约"+ "占 0.4 GB,并可实时雕刻。Move 会改变下层形状,细节随之移动。"},+ // --- PanelIntegrations.cpp (tools/i18n/coverage.py) ---+ {"Show SculptForge on Discord", "在 Discord 上显示 SculptForge"},+ {"Your Discord profile shows SculptForge, its icon and how long you've been sculpting. Sent only to the Discord "+ "app on this computer, which shows it to your friends. Off by default.",+ "你的 Discord 个人数据会显示 SculptForge、其图标与你已雕刻多久。只发送给这台电脑上的 Discord 应用程序,由它显示"+ "给你的朋友。默认关闭。"},+ {"Show the monthly challenge", "显示每月挑战"},+ {"Adds \"Monthly challenge: <theme>\", with the theme you type below.",+ "加入“Monthly challenge: <theme>”,主题为你在下方输入的内容。"},+ {"Show the file name", "显示文件名称"},+ {"Adds the name of the file you're working on (never its folder). Off by default.",+ "加入你正在处理的文件名称(绝不含文件夹)。默认关闭。"},+ // --- PanelKelvinlet.cpp (tools/i18n/coverage.py) ---+ {"How the Kelvinlet brushes' material keeps its volume (Poisson's ratio): 0 is rubbery (it stretches without "+ "bulging), 100 is incompressible clay (pressing in bulges the surface up around the thumb, pulling out draws "+ "the sides in).",+ "Kelvinlet 笔刷材质保持体积的方式(帕松比):0 像橡胶(拉伸时不隆起),100 是不可压缩的粘土(压下时拇指周围表面"+ "隆起,拉出时两侧内缩)。"},+ {"A tighter, more pointed peak at the brush centre with the same soft reach (a smaller inner scale of the "+ "multi-scale Kelvinlet): for pulling points and tips.",+ "笔刷中心更集中、更尖的峰值,柔和范围不变(多尺度 Kelvinlet 的内部尺度较小):用于拉出尖端与末梢。"},+ {"Detail Clone: the distance between stamps along the stroke, in stamp widths (1 = edge to edge).",+ "Detail Clone:沿笔触的印章间距,以印章宽度为单位(1 = 边缘相接)。"},+ {"Detail Clone: each stamp's top turns with the stroke (a row of scales or rivets along a curve); off, every "+ "stamp keeps the screen's up.",+ "Detail Clone:每个印章的顶端随笔触转动(沿曲线排列的一排鳞片或铆钉);关闭时,每个印章都保持屏幕的上方。"},+ {"Alpha and VDM from the viewport: drag a square over any sculpted detail (Shift for a circle) and capture it as "+ "a grayscale height alpha and as a vector displacement brush, ready to stamp with the VDM brush or along "+ "strokes with Detail Clone, and to save in your library.",+ "从视口捕获 Alpha 与 VDM:在任何雕刻细节上拖出方形(Shift 为圆形),捕获为灰阶高度 Alpha 与矢量位移笔刷,可用 "+ "VDM 笔刷压印或以 Detail Clone 沿笔触使用,也可保存到资源库。"},+ {"What counts as the detail: the capture is the surface minus a smoothed copy of itself. 0 measures from a flat "+ "plane (the whole shape); higher takes away more of the broad form, so a detail on a curved arm or cheek "+ "captures flat. The VDM keeps each point's sideways offset too (overhangs).",+ "何者算是细节:捕获结果为表面减去其平滑后的副本。0 从平面量起(整个形状);越高去除越多大形,因此弯曲手臂或脸颊"+ "上的细节会捕获成平的。VDM 也会保留每个点的侧向位移(悬垂)。"},+ {"Fades the capture out toward its border, so stamps blend into any surface.",+ "让捕获结果向边缘淡出,使印章能融入任何表面。"},+ {"Pixels a side of the alpha and the map (512 or less suits most details).",+ "Alpha 与贴图每边的像素数(大多数细节 512 以下即可)。"},+ {"Height alpha: measure from a plane fitted to the surface (a tilted surface captures level) instead of the "+ "screen's plane.",+ "高度 Alpha:从贴合表面的平面量起(倾斜表面会捕获成水平),而非屏幕平面。"},+ {"Height alpha: white = deepest (for carving brushes).", "高度 Alpha:白色 = 最深(用于雕刻凹陷的笔刷)。"},+ {"What the alpha and the VDM are called in your library (the same name replaces).",+ "Alpha 与 VDM 在资源库中的名称(同名会替换)。"},+ {"Make the height capture the brush alpha (it shapes every brush's stamp).",+ "将高度捕获设为笔刷 Alpha(决定每个笔刷印章的形状)。"},+ {"Make the capture the VDM brush's map and pick the VDM brush (Drag Stamp stamps it).",+ "将拾取设为 VDM 笔刷的贴图并选择 VDM 笔刷(以 Drag Stamp 压印)。"},+ {"Paint copies of the captured detail along your strokes, each turned to follow the stroke.",+ "沿着你的笔触绘制捕获细节的副本,每个都转向跟随笔触。"},+ {"Keep both: the alpha as a PNG in your Library Alphas folder, the VDM in your brush library (Alpha picker, Brush "+ "> Vector Displacement and the Library's Brush tab), with thumbnails.",+ "两者都保留:Alpha 以 PNG 存入资源库的 Alphas 文件夹,VDM 存入笔刷资源库(Alpha 选择器、笔刷 > 矢量位移与资源库的“"+ "笔刷”选项卡),并附缩略图。"},+ // --- PanelMasking.cpp (tools/i18n/coverage.py) ---+ {"Shapes", "形状"},+ {"Lasso Mask and Rectangle Mask mask only what faces you: the far side and folds turned away stay as they are.",+ "Lasso Mask 与 Rectangle Mask 只遮罩面向你的部分:背面与背向你的皱褶保持不变。"},+ {"Mask by", "遮罩依据"},+ {"By peaks", "按凸起"},+ {"Mask ridges, peaks and sharp edges (replaces the mask; uses the mask strength)",+ "遮罩棱线、凸起与锐利边缘(替换遮罩;使用遮罩强度)"},+ {"By colour", "按色彩"},+ {"Mask where the vertex paint is close to the main colour (the left shelf's swatch); Tolerance sets how close.",+ "遮罩顶点绘制接近主要色彩(左侧工具栏的色板)之处;“容差”设置接近程度。"},+ {"By facing", "按朝向"},+ {"Mask what faces the camera (or faces up or down; Facing below), within the angle: e.g. the front of a face, or "+ "the top of a rock.",+ "在角度范围内遮罩面向相机(或朝上、朝下;见下方“朝向”)的部分:例如脸的正面或岩石顶部。"},+ {"By border", "按边界"},+ {"Mask the open edges of the mesh and the edge rings inside them, so sculpting never moves the border. Replaces "+ "the mask and uses the mask strength. A closed mesh has no open edges.",+ "遮罩网格的开放边缘及其内侧的边环,让雕刻绝不会移动边界。会替换遮罩并使用遮罩强度。封闭网格没有开放边缘。"},+ {"Adjust", "调整"},+ {"Mask by options", "遮罩依据选项"},+ {"Cavity / peaks threshold %.2f", "凹陷/凸起阈值 %.2f"},+ {"How deep a crease (By cavity) or how sharp a ridge (By peaks) must be: 0 takes anything, higher only the "+ "strongest.",+ "折痕需要多深(按凹陷)或棱线需要多锐利(按凸起):0 全部纳入,越高只取最明显的。"},+ {"Face group %d", "面组 %d"},+ {"Colour tolerance %.2f", "色彩容差 %.2f"},+ {"Border rings %d", "边界环数 %d"},+ {"Face Group borders", "面组边界"},+ {"By border also masks where face groups meet.", "“按边界”也会遮罩面组交会处。"},+ {"Soft", "柔和"},+ {"By border fades the mask from the border towards the innermost ring.",+ "“按边界”会让遮罩从边界向最内侧的环淡出。"},+ // --- PanelMaya.cpp (tools/i18n/coverage.py) ---+ {"Get automatically", "自动获取"},+ {"Load what Maya sends as soon as it arrives: SculptForge checks the exchange folder's manifest once a second "+ "(its modification time and size only). Off by default; off: use Get from Maya.",+ "Maya 传来的内容一到就加载:SculptForge 每秒检查一次交换文件夹的列表文件(只看修改时间与大小)。默认关闭;关闭时:"+ "请使用“从 Maya 获取”。"},+ {"Turn the Maya bridge off", "关闭 Maya 桥接"},+ {"Forget the exchange folder; nothing in it is deleted.", "忘记交换文件夹;其中的内容不会被删除。"},+ // --- PanelPacks.cpp (tools/i18n/coverage.py) ---+ {"Install Pack...", "安装资源包..."},+ {"Install a SculptForge pack (.sfpack): brushes, alphas, Lit Spheres, Material Recipes, VDMs, keymaps, pie menus "+ "and macros. A review shows exactly what's inside, its license and its author before anything is installed. "+ "Packs hold data only: nothing in one ever runs.",+ "安装 SculptForge 资源包 (.sfpack):笔刷、Alpha、Lit Sphere、材质配方、VDM、按键配置、饼菜单与宏。安装前会先查看"+ ",清楚显示内容、许可与作者。资源包只含数据:其中的任何内容都不会运行。"},+ {"New Pack...", "添加资源包..."},+ {"Make a pack from your own brushes, alphas, Lit Spheres, Material Recipe, VDMs, pie menus, shortcuts and macros, "+ "to share as one .sfpack file.",+ "以你自己的笔刷、Alpha、Lit Sphere、材质配方、VDM、饼菜单、快捷键与宏创建资源包,以单一 .sfpack 文件分享。"},+ {"Packs", "资源包"},+ {"Library > Packs: the installed packs. Switch one off or remove it, apply its keymap, add its pie menus.",+ "资源库 > 资源包:已安装的资源包。可禁用或移除、应用其按键配置、加入其饼菜单。"},+ {"Record Macro", "录制宏"},+ {"Start recording: the commands you run (menus, buttons, the console) are kept as a macro until you press it "+ "again. Files inside the project folder are kept as relative paths, any other file is asked for when the macro "+ "runs.",+ "开始录制:你运行的命令(菜单、按钮、控制台)会保存为宏,直到你再按一次。项目文件夹内的文件以相对路径保存,"+ "其他文件则在运行宏时询问。"},+ {"Macro Editor", "宏编辑器"},+ {"Write or change a macro: SculptForge commands, one per line, checked as you type. Only SculptForge's own "+ "commands, nothing that reaches the network, and files only inside the project folder or picked when it runs.",+ "编写或修改宏:SculptForge 命令,每行一个,输入时实时检查。只限 SculptForge 自己的命令,不含任何连网操作,文件"+ "只限项目文件夹内或运行时选择的文件。"},+ {"Macros", "宏"},+ {"Install Pack", "安装资源包"},+ {"This pack can't be installed", "无法安装此资源包"},+ {"Nothing was installed. SculptForge only installs packs that pass every check: plain data files of the kinds a "+ "pack may hold, listed in its pack.json, within safe sizes, with nothing that could leave the pack's folder.",+ "未安装任何内容。SculptForge 只安装通过所有检查的资源包:资源包允许类型的纯数据文件,列于其 pack.json 中,大小安全,且"+ "没有任何可能离开资源包文件夹的内容。"},+ {"Member pack", "会员资源包"},+ {"Author:", "作者:"},+ {"License:", "许可:"},+ {"Replaces the installed version", "替换已安装的版本"},+ {"Contains:", "内容:"},+ {"No license text in the pack (see License above).", "资源包中没有许可文本(请见上方的许可)。"},+ {"Packs hold data only: nothing in this one runs on install or when a project opens. Its macros list their "+ "commands and ask before they first run.",+ "资源包只含数据:此资源包的任何内容都不会在安装或打开项目时运行。其宏会列出命令,并在第一次运行前询问。"},+ {"Keymaps and pie menus are only applied when you choose to (Library > Packs).",+ "按键配置与饼菜单只在你选择时才应用(资源库 > 资源包)。"},+ {"Install", "安装"},+ {"Copy the pack into SculptForge's packs folder and add its items to the lists.",+ "将资源包复制到 SculptForge 的资源包文件夹,并将其项目加入列表。"},+ {"Stop Recording", "停止录制"},+ {"Safe mode (--no-packs): no pack is loaded this session", "安全模式 (--no-packs):本次会话不加载任何资源包"},+ {"No packs installed. Drop a .sfpack on the window or use Install Pack...",+ "尚未安装资源包。将 .sfpack 拖放到窗口中,或使用“安装资源包...”"},+ {"Pack on", "启用资源包"},+ {"Off: its items leave the lists until you switch it on again (nothing is deleted).",+ "关闭:其项目会从列表中移除,直到你再次启用(不会删除任何内容)。"},+ {"Details", "详细信息"},+ {"Remove", "移除"},+ {"Delete the pack and everything it brought. Your own files are never touched.",+ "删除资源包及其带来的所有内容。你自己的文件绝不会被改动。"},+ {"Apply keymap", "应用按键配置"},+ {"Add pie menu", "加入饼菜单"},+ {"Run", "运行"},+ {"Your macros", "你的宏"},+ {"Pack keymaps", "资源包按键配置"},+ {"Take the keys of this keymap from an installed pack (only actions SculptForge knows; a key another action had "+ "moves here). Saved automatically.",+ "从已安装资源包的此按键配置取用按键(只限 SculptForge 识别的录制片段;原属其他录制片段的按键会移到这里)。自动保存。"},+ {"New Pack", "添加资源包"},+ {"The pack's name, shown next to every item it brings.", "资源包名称,会显示在它带来的每个项目旁。"},+ {"Id", "ID"},+ {"Its folder name: lower-case letters, digits, '.', '_' or '-'. A newer version keeps the same id.",+ "其文件夹名称:小写字母、数字、'.'、'_' 或 '-'。新版本沿用相同的 ID。"},+ {"Version", "版本"},+ {"Author", "作者"},+ {"Who made it (shown when it's installed).", "制作者(安装时显示)。"},+ {"License", "许可"},+ {"For example CC-BY-4.0, CC0-1.0 or your own terms.", "例如 CC-BY-4.0、CC0-1.0 或你自己的条款。"},+ {"Member pack (insider channel)", "会员资源包(Insider 频道)"},+ {"Marks the pack as a members' pack (Member Requests). Display only: anyone can install it.",+ "将资源包标记为会员资源包 (Member Requests)。仅供显示:任何人都能安装。"},+ {"Nothing of your own yet: save brushes, put alphas and Lit Spheres in your Library folders, record a macro...",+ "还没有你自己的内容:保存笔刷、将 Alpha 与 Lit Sphere 放进资源库文件夹、录制宏..."},+ {"Save Pack...", "保存资源包..."},+ {"Save Pack", "保存资源包"},+ {"Write the .sfpack, checked exactly as an install would check it.",+ "写出 .sfpack,并以与安装时完全相同的方式检查。"},+ {"Run Macro?", "要运行宏吗?"},+ {"Your macro", "你的宏"},+ {"Files it uses stay inside the project folder.", "它使用的文件都在项目文件夹内。"},+ {"Run it now. You won't be asked again for this macro unless it changes.",+ "立即运行。除非此宏有更改,否则不会再询问你。"},+ {"One command per line, as in the console (# starts a comment). Files: a path inside the project folder, or ? to "+ "pick one when it runs.",+ "每行一个命令,与控制台相同(# 开头为注释)。文件:项目文件夹内的路径,或用 ? 在运行时选择。"},+ {"Recording macro", "正在录制宏"},+ // --- PanelPaintLayers.cpp (tools/i18n/coverage.py) ---+ {"Lock the layer: the Paint brush, fills, clears and merges leave it alone.",+ "锁定图层:Paint 笔刷、填满、清除与合并都不会影响它。"},+ {"Show or hide the layer. Hidden layers don't show or export.", "显示或隐藏图层。隐藏的图层不会显示或导出。"},+ {"How the active layer mixes with the layers below, with Photoshop's maths: Multiply darkens, Screen lightens, "+ "Overlay adds contrast (50% grey changes nothing), Add brightens, ...",+ "当前图层与下方图层的混合方式,采用 Photoshop 的运算:色彩增值变暗、滤色变亮、覆盖增加对比(50% 灰不生成变化)、"+ "相加变亮,..."},+ {"How strongly the active layer shows (0-100%). Painting keeps its own coverage.",+ "当前图层的显示强度 (0-100%)。绘制保有其自身的覆盖度。"},+ {"Add a transparent paint layer above the active one and paint on it.",+ "在当前图层上方添加透明绘制图层并在上面绘制。"},+ {"Copy the active layer (Base becomes an opaque layer) to a new layer above it.",+ "将当前图层复制到其上方的新图层(基底会变成不透明图层)。"},+ {"Delete the active layer (undoable). Base can't be deleted.", "删除当前图层(可撤销)。基底无法删除。"},+ {"Move the active layer up the stack (it then covers the layer it passed).",+ "将当前图层在堆栈中上移(之后会覆盖它越过的图层)。"},+ {"Move the active layer down the stack (Base stays at the bottom).",+ "将当前图层在堆栈中下移(基底维持在最底部)。"},+ {"Merge the active layer into the one below it (Base for the lowest layer), keeping how it looks.",+ "将当前图层合并到下方图层(最下层则合并到基底),并保留其外观。"},+ {"Flatten", "平面化"},+ {"Bake every visible layer into Base and remove the layers (hidden layers are discarded).",+ "将所有可见图层烘焙到基底并移除图层(隐藏的图层会被丢弃)。"},+ {"Clear the active layer: a layer becomes transparent, Base white. Undoable.",+ "清除当前图层:普通图层变为透明,基底变为白色。可撤销。"},+ {"Fill the active layer with the current colour (respects the mask, like Color > Fill).",+ "以当前色彩填满当前图层(遵守遮罩,如同色彩 > 填满)。"},+ // --- PanelParts.cpp (tools/i18n/coverage.py) ---+ {"Draw the other Parts solid again", "将其他部件恢复为实体显示"},+ {"See through the other Parts to the active one", "通过其他部件看到当前部件"},+ // --- PanelPbr.cpp (tools/i18n/coverage.py) ---+ {"Write the texture's channels as image files for an engine or DCC, with the export preset chosen beside the "+ "button (Unreal, Unity URP / HDRP, glTF, Godot, Blender, USD).",+ "将贴图的各通道写成图像文件,供引擎或 DCC 使用,采用按钮旁所选的导出预设(Unreal、Unity URP/HDRP、glTF、Godot、"+ "Blender、USD)。"},+ {"Show one channel on its own on the model: roughness, metallic, height, AO and opacity in grey, the normal as "+ "its colours (with the height's normal in it), emission in colour. Painting updates it live.",+ "在模型上单独显示一个通道:粗糙度、金属度、高度、AO 与不透明度以灰阶显示,法线以其色彩显示(含高度生成的法线),"+ "自发光以彩色显示。绘制时实时更新。"},+ {"Which files Export Maps writes and how channels are packed. Your own presets are JSON files (export_maps "+ "preset=path/to/preset.json; see the guide's Export presets page).",+ "“导出贴图”会写出哪些文件,以及通道如何封装。你自己的预设是 JSON 文件(export_maps preset=path/to/preset.json;"+ "请参阅指南的 Export presets 页面)。"},+ {"Set the brush's colour, roughness and metallic at once, and make it paint those channels.",+ "一次设置笔刷的色彩、粗糙度与金属度,并让它绘制这些通道。"},+ {"Which way painted normals lean (x, y); 0, 0 paints a flat normal.",+ "绘制法线的倾斜方向 (x, y);0, 0 绘制平坦法线。"},+ {"Whether this layer affects the channel. Right-click for the channel's blend mode (Normal Combine lays normal "+ "detail onto the normals below) and opacity.",+ "此图层是否影响该通道。按右键可设置通道的混合模式(Normal Combine 会将法线细节叠加到下方的法线上)与不透明度。"},+ // --- PanelPerformance.cpp (tools/i18n/coverage.py) ---+ {"While you rotate, pan or zoom a big scene (over the hardware profile's motion proxy threshold, which the frame "+ "governor adjusts; 10 million triangles without a profile), draw a lighter version without antialiasing, so the "+ "view keeps up; it is full detail again as soon as the view stops.",+ "旋转、平移或缩放大型场景时(超过硬件配置文件的运动代理阈值,由帧调节器调整;没有配置文件时为 1000 万个三角面),"+ "绘制不含抗锯齿的较轻版本,让视图保持流畅;视图一停止就恢复完整细节。"},+ {"Run brushes, normal and BVH updates and project saving on every core. Turn it off only to compare speeds or "+ "rule it out when troubleshooting: the results are the same either way.",+ "在所有核心上运行笔刷、法线与 BVH 更新及项目保存。只在比较速度或排除问题时关闭:两种方式结果都相同。"},+ {"Sculpt strokes work out the brush on their own thread while the view keeps drawing at full speed, and show the "+ "dabs still being worked out as a preview on the surface, with the cursor and the stroke's head drawn where the "+ "pen is about to be. On a heavy mesh the surface moves under the pen at once and lifting the pen is instant. "+ "The finished sculpt is exactly the same either way.",+ "雕刻笔触在独立线程上计算笔刷,视图则持续全速绘制,并将仍在计算中的笔触以预览方式显示在表面上,光标与笔触前端"+ "会画在笔即将到达的位置。在大型网格上,表面会立即在笔下移动,抬笔也是实时的。两种方式最终的雕刻结果完全相同。"},+ {"Live Move (Experimental)", "实时移动(实验性)"},+ {"Experimental. The Move brush's drag is drawn by the graphics card from where the surface started, so it follows "+ "the pen at the view's frame rate whatever the mesh size; the move itself is applied once, exactly, when you "+ "lift the pen. Not with masks, hidden parts, sculpt layers, micro levels, Connected Only or View falloff (Move "+ "works as before there).",+ "实验性功能。Move 笔刷的拖动由显卡从表面起始状态绘制,因此无论网格多大,都能以视图的帧率跟上笔;实际移动会在抬"+ "笔时精确应用一次。不适用于遮罩、隐藏部分、雕刻图层、微细分层级、仅限相连或视图衰减(这些情况下 Move 与以往相"+ "同)。"},+ {"Background Preview (Experimental)", "背景预览(实验性)"},+ {"Experimental. On meshes of 2 million vertices or more, big brushes are worked out on their own thread; with "+ "this on, the dabs still being worked out are shown as a preview on the surface (as Predictive Strokes does), "+ "so the stroke stays under the pen. The finished sculpt is exactly the same either way.",+ "实验性功能。在 200 万个顶点以上的网格上,大笔刷会在独立线程上计算;打开此选项时,仍在计算中的笔触会以预览方式"+ "显示在表面上(如同预测笔触),让笔触保持在笔下。两种方式最终的雕刻结果完全相同。"},+ {"Fast Upload (Experimental)", "快速上传(实验性)"},+ {"Experimental. While you sculpt, the changed part of the mesh goes to the graphics card through memory both can "+ "see, and the card copies it into place itself, instead of the driver copying it during the frame. The sculpt "+ "and the view are exactly the same either way; needs a driver with buffer storage (OpenGL 4.4).",+ "实验性功能。雕刻时,网格中更改的部分会通过双方都能访问的内存传到显卡,由显卡自行复制到位,而不是在帧中由驱"+ "动程序复制。两种方式的雕刻与视图完全相同;需要支持 buffer storage 的驱动程序 (OpenGL 4.4)。"},+ {"With Predictive Strokes: while you sculpt, the brush only moves the surface and shades the moved part from its "+ "facets; the smooth shading, the cavities and the rest are worked out once when you lift the pen. Lighter on "+ "laptops and on battery: the hardware profile turns it on there by itself (its Draft brushes setting); this "+ "turns it on everywhere. Brushes that follow the surface's direction (Inflate, the plane brushes) use its "+ "direction from the stroke's start, so the result can differ slightly from a full stroke.",+ "搭配预测笔触:雕刻时笔刷只移动表面,并以其面片为移动部分着色;平滑着色、凹陷等其余部分会在抬笔时计算一次。在笔"+ "电与使用电池时较省资源:硬件配置文件会在这些情况自动打开(其草稿笔刷设置);此选项则在所有情况打开。跟随表面方"+ "向的笔刷(Inflate、平面类笔刷)使用笔触起点的方向,因此结果可能与完整笔触略有不同。"},+ {"Fast Big Brushes (Experimental)", "快速大笔刷(实验性)"},+ {"Experimental. Big brushes on dense meshes: a dab that reaches more than 150,000 vertices finds its plane from a "+ "sample of them and turns the shading along with the move it makes, and the dabs waiting for a frame are placed "+ "together in one pass. Every vertex still moves by the brush itself; the exact shading follows behind the brush "+ "and when you lift the pen. Small brushes, Smooth, Layer, Inflate, Nudge, Clay Block, alphas and masked areas "+ "are placed dab by dab as before. Try it on a heavy mesh and tell us how it feels.",+ "实验性功能。高密度网格上的大笔刷:影响超过 150,000 个顶点的笔触会从采样的顶点求出平面,并随其移动一并旋转着色,"+ "等待帧的笔触会在一次处理中一起放置。每个顶点仍由笔刷本身移动;精确着色会在笔刷之后及抬笔时跟上。小笔刷、S"+ "mooth、Layer、Inflate、Nudge、Clay Block、Alpha 与遮罩区域仍与以往一样逐笔放置。请在大型网格上试试,并告诉我们感"+ "觉如何。"},+ {"Samples per pixel in the 3D view: more smooths edges, fewer is faster on huge meshes.",+ "3D 视图中每个像素的采样数:较多边缘较平滑,较少在超大网格上较快。"},+ {"Draw the 3D view at a share of the window's resolution and scale it up: 75% draws about half the pixels, 50% a "+ "quarter. For slow or integrated GPUs and big screens; Save Render stays sharp (#80).",+ "以窗口分辨率的一部分绘制 3D 视图再放大:75% 约绘制一半的像素,50% 约四分之一。适用于较慢或内置的 GPU 与大屏幕;"+ "“保存渲染”仍保持清晰 (#80)。"},+ {"What the last brush stroke cost, per dab (one step of the brush, all symmetry sides): finding and moving the "+ "vertices, updating their normals and the BVH (the picking structure), and sending the change to the GPU (per "+ "frame). Under 16 ms keeps up with a 60 Hz display.",+ "上一笔触每个笔触(笔刷的一步,含所有对称侧)的耗时:查找并移动顶点、更新其法线与 BVH(选择结构),以及将更改"+ "发送到 GPU(每帧)。低于 16 ms 即可跟上 60 Hz 显示器。"},+ {"What the scene holds: the meshes with their topology, the BVHs, the subdivision levels kept for stepping "+ "between them, the undo history (Edit keeps up to 1 GB, dropping the oldest steps), painted textures with their "+ "layers and material channels (only painted 64x64 tiles of a channel use memory), and the GPU buffers of the "+ "visible Parts.",+ "场景包含的内容:网格与其拓扑、BVH、为了切换而保留的细分层级、撤销历史(编辑最多保留 1 GB,会丢弃最旧的步骤)"+ "、含图层与材质通道的绘制贴图(通道中只有绘制过的 64x64 图块会占用内存),以及可见部件的 GPU 缓冲区。"},+ // --- PanelPerformanceProfile.cpp (tools/i18n/coverage.py) ---+ {"Measure this computer again (about 2 seconds): the GPU's triangle throughput and upload speed, brush speed and "+ "memory bandwidth, then pick the performance profile. Your overrides are kept.",+ "重新测量这台电脑(约 2 秒):GPU 的三角面处理量与上传速度、笔刷速度与内存带宽,然后选择性能配置文件。你的自定义值"+ "会保留。"},+ {"Hold the view at the target frame rate (60 fps, or 120 on a 120 Hz display) by drawing big scenes' lighter "+ "motion proxy sooner or later while the view moves. Only what you see changes, never the model.",+ "视图移动时,通过提早或延后使用大型场景的较轻运动代理,让视图维持目标帧率(60 fps,120 Hz 显示器为 120)。只改"+ "变你看到的画面,绝不改变模型。"},+ {"SculptForge measures this computer on first launch (and when the graphics card, its driver or the version "+ "changes) and picks settings to match: how many triangles the view draws per frame, when big scenes switch to "+ "their lighter motion proxy, GPU memory and upload budgets, texture and subdivision limits, threads. Nothing is "+ "sent anywhere.",+ "SculptForge 会在第一次启动时(以及显卡、驱动程序或版本更改时)测量这台电脑,并选择相符的设置:视图每帧绘制"+ "多少三角面、大型场景何时切换为较轻的运动代理、GPU 内存与上传预算、贴图与细分上限、线程数。不会发送任何数据"+ "。"},+ // --- PanelPhone.cpp (tools/i18n/coverage.py) ---+ {"Use your phone as SculptForge's camera: scan the QR code to send scans, photos and splat files, see the sculpt "+ "on your desk in AR, and drive a face with your own. No app to install; phone and computer on the same Wi-Fi.",+ "把手机当作 SculptForge 的相机:扫描 QR 码即可发送扫描、照片与 Splat 文件,在桌上以 AR 查看雕刻,并用你的脸驱动"+ "脸部。无须安装应用程序;手机与电脑连上同一个 Wi-Fi 即可。"},+ {"Record the live face feed into a take (Captures/<time>-face/take.jsonl, one frame of ARKit weights per line) "+ "for playback and export. Again: stop.",+ "将实时脸部信号录制为录制片段(Captures/<time>-face/take.jsonl,每行一个 ARKit 权重帧),以供播放与导出。再按一次"+ ":停止。"},+ {"Point your phone's camera at it and tap the link: the capture page opens, paired with this window. A new code "+ "is made every time the window opens.",+ "用手机相机对准它并点击链接:捕获页面会打开,并与此窗口配对。每次打开窗口都会生成新代码。"},+ {"For a phone that can't scan: open the address in its browser and type these 6 digits. After 5 wrong tries the "+ "code changes.",+ "若手机无法扫描:在其浏览器中打开网址并输入这 6 位数字。输入错误 5 次后代码会更改。"},+ {"This computer has several network addresses. If the phone can't open the page, pick the one on the Wi-Fi the "+ "phone uses (often 192.168.x.x).",+ "这台电脑有多个网络地址。如果手机无法打开页面,请选择手机所用 Wi-Fi 上的地址(通常是 192.168.x.x)。"},+ {"A photo sent from the phone starts Image to 3D straight away with the service chosen there (free Hugging Face "+ "by default). Off: it opens in Image to 3D and waits for Generate.",+ "从手机传来的照片会立即以手机上选择的服务开始“图像转 3D”(默认为免费的 Hugging Face)。关闭:会在“图像转 3D”"+ "中打开并等待“生成”。"},+ {"While the phone shows the model, sculpting re-exports it (at most every few seconds); the phone offers the new "+ "version.",+ "手机显示模型期间,雕刻会重新导出模型(最多每几秒一次);手机会提供新版本。"},+ {"Swap the left and right expressions (and the head's turn), if the character winks with the wrong eye.",+ "交换左右表情(与头部转向),用于角色眨错眼睛时。"},+ // --- PanelProject.cpp (tools/i18n/coverage.py) ---+ {"Members get betas early.", "会员可抢先获取 Beta 版。"},+ {"Become a member", "成为会员"},+ {"Once a day at startup, download a small file from the SculptForge website that names the newest version, and "+ "show a banner when there is a newer one. Nothing about you or your computer is sent.",+ "每天启动时一次,从 SculptForge 网站下载一个标记最新版本的小文件,有较新版本时显示横幅。不会发送任何关于你或你电"+ "脑的信息。"},+ {"Update channel", "更新通道"},+ {"Stable", "稳定版"},+ {"Preview (betas)", "预览(Beta 版)"},+ {"Stable offers only finished releases. Preview also offers the betas the update feed names. Betas are a member "+ "perk: members get them from the private members' repository and the #members channel on Discord. When the "+ "stable release passes a beta, Preview offers that.",+ "稳定版只提供正式发布版本。预览另外也提供更新来源列出的 Beta 版。Beta 版是会员福利:会员可从私人会员仓库与 "+ "Discord 的 #members 频道获取。当稳定版超越某个 Beta 版时,预览会改为提供稳定版。"},+ // --- PanelRetopo.cpp (tools/i18n/coverage.py) ---+ {"Automatic quad retopology: rebuilds the Part as clean, all-quad topology whose edge loops follow the forms, "+ "close to Target Polygons. Runs in the background (Cancel stops it); undoable. Then divide it and use Part > "+ "Project > Project Detail to bring the detail back.",+ "自动四边面重新拓扑:将部件重建为干净、全四边面的拓扑,其边环顺着形体走,面数接近目标多边形数量。在后台运行("+ "“取消”可停止);可撤销。之后细分它,再用部件 > 投影 > Project Detail 找回细节。"},+ {"The Quad Remesh Guides brush: drag on the model to draw a curve for Quad Remesh's edge loops to follow, around "+ "an eye, the mouth or a joint. A curve that ends where it started becomes a loop. Symmetry mirrors it; "+ "Alt+click a curve to delete it. Pick any brush to sculpt again.",+ "Quad Remesh Guides 笔刷:在模型上拖动画出曲线,让 Quad Remesh 的边环沿着它走,例如眼睛、嘴巴或关节周围。终点"+ "回到起点的曲线会成为环。对称会镜像它;Alt+单击曲线即可删除。选择任何笔刷即可继续雕刻。"},+ {"Delete the last Quad Remesh guide curve drawn (with its mirror copies).",+ "删除最后画的 Quad Remesh 导引曲线(含其镜像副本)。"},+ {"Delete every Quad Remesh guide curve of this Part.", "删除此部件的所有 Quad Remesh 导引曲线。"},+ {"Project Detail", "Project Detail"},+ {"Project the shape and vertex paint of every other visible Part onto this one: each vertex moves along its "+ "normal to the nearest surface within Dist. The mask holds vertices back. Typical use: Quad Remesh a copy, "+ "divide it a few times, show the original, Project Detail.",+ "将所有其他可见部件的形状与顶点绘制投影到此部件上:每个顶点沿法线移动到距离范围内最近的表面。遮罩可固定顶点。典"+ "型用法:对副本运行 Quad Remesh,细分几次,显示原始模型,再 Project Detail。"},+ {"Quick Remesh", "Quick Remesh"},+ {"Remesh after each stroke", "每笔触后重新网格化"},+ {"After a stroke that stretched the surface (edges pulled to more than 1.6 times their length), the active Part "+ "is remeshed at the Resolution above in the background. Sculpting never waits: a stroke made meanwhile remeshes "+ "again. Each remesh is one undo step. Not on a Part with subdivision levels, sculpt layers or a painted texture.",+ "笔触拉伸表面后(边被拉长到原长的 1.6 倍以上),当前部件会在后台以上方的分辨率重新网格化。雕刻不需要等待:期间"+ "进行的笔触会再次重新网格化。每次重新网格化为一个撤销步骤。不适用于有细分层级、雕刻图层或绘制贴图的部件。"},+ {"Remeshing in the background. The result replaces the Part when it's done.",+ "正在后台重新网格化。完成后结果会替换部件。"},+ {"Stop Quad Remesh; the Part stays as it is.", "停止 Quad Remesh;部件维持原样。"},+ {"Quad Remesh 2 (default): a curvature-aligned layout solved as one integer grid over the whole model, so poles "+ "appear only where the form needs them and edge loops run unbroken; open guide curves become exact edge loops. "+ "Legacy: the method of SculptForge 0.9 (more poles, a split look).",+ "Quad Remesh 2(默认):以整个模型为单一整数网格求解的曲率对齐布线,极点只出现在形体需要之处,边环不中断;开放的"+ "导引曲线会成为精确的边环。旧版:SculptForge 0.9 的方法(极点较多,看起来较零碎)。"},+ {"About how many quads Quad Remesh makes (Ctrl+click to type a number). Half / Same / Double set it from the "+ "Part's current polygon count.",+ "Quad Remesh 大约生成的四边面数量(按住 Ctrl 并单击可输入数字)。一半/相同/双倍会按部件当前多边形数量设置"+ "。"},+ {"Target half the Part's current polygon count.", "目标为部件当前多边形数量的一半。"},+ {"Target the Part's current polygon count (to clean up topology without changing its density).",+ "目标为部件当前多边形数量(在不改变密度的情况下整理拓扑)。"},+ {"Target twice the Part's current polygon count.", "目标为部件当前多边形数量的两倍。"},+ {"0: quads all about the same size. Higher: smaller quads where the surface curves, bigger ones on flat areas "+ "(the count stays near the target).",+ "0:四边面大小大致相同。较高:表面弯曲处四边面较小,平坦处较大(数量维持在目标附近)。"},+ {"Edge loops follow the face group borders exactly and the result keeps the face groups. Paint groups where you "+ "want loops (around the eyes, the mouth) to guide the flow.",+ "边环会精确沿着面组边界,结果也会保留面组。在你想要边环的地方(眼睛、嘴巴周围)绘制组,即可引导布线。"},+ {"Hard edges get an edge loop, so they stay sharp (Quad Remesh 2: faces meeting at more than about 60 degrees "+ "along a line at least a few quads long; legacy: more than 50 degrees).",+ "硬边会得到一条边环,因此保持锐利(Quad Remesh 2:沿着至少数个四边面长的线,以超过约 60 度相接的面;旧版:超过 "+ "50 度)。"},+ {"Paint where you want density: red areas get up to 4 times the quads, blue areas down to a quarter, white is "+ "unchanged.",+ "在你想要密度的地方绘制:红色区域最多 4 倍四边面,蓝色区域最少四分之一,白色不变。"},+ {"Keep the Part as it was, hidden, right below the new one (\"<name> Original\"), ready to Project Detail its "+ "detail back. Off: replace it (undo brings it back).",+ "将原部件隐藏保留在新部件正下方(“<name> Original”),随时可用 Project Detail 找回细节。关闭:直接替换(可撤销"+ "恢复)。"},+ {"How clean the new topology is: poles are vertices with other than four edges (fewer is cleaner), corners off "+ "square measure how far quad corners are from 90 degrees, and the distance is how far the new surface strays "+ "from the sculpt (as a percentage of its size; Project Detail brings fine detail back).",+ "新拓扑的干净程度:极点是边数不为四的顶点(越少越干净),非直角角落衡量四边面角落偏离 90 度的程度,距离则是新表"+ "面偏离雕刻的程度(以其大小的百分比表示;Project Detail 可找回细部细节)。"},+ {"How far around each guide curve the edge flow follows it: 0 = only the edge loop on the curve, 100 = about six "+ "quads to each side. The loop on the curve is always made.",+ "布线在每条导引曲线周围跟随的范围:0 = 只有曲线上的边环,100 = 每侧约六个四边面。曲线上的边环一定会创建。"},+ {"How far each vertex looks for the source surface, along its normal, as a fraction of the Part's size. Raise it "+ "if parts don't pick up the detail; lower it where surfaces are close together.",+ "每个顶点沿法线查找来源表面的距离,以部件大小的比例表示。若有部分没获取细节请调高;表面彼此靠近处请调低。"},+ {"Smooth the projected result this many times (softens noise from the source).",+ "将投影结果平滑这么多次(减轻来源的噪波)。"},+ {"Where the source is found on both sides of a vertex, settle halfway between instead of on the nearest.",+ "当来源位于顶点两侧时,停在中间而非最近的一侧。"},+ {"Project the shape (into the active sculpt layer).", "投影形状(到当前雕刻图层)。"},+ {"Vertex Paint", "顶点绘制"},+ {"Project the vertex paint (into the active paint layer) when a source has any.",+ "来源有顶点绘制时将其投影(到当前绘制图层)。"},+ // --- PanelSculptable.cpp (tools/i18n/coverage.py) ---+ {"Turn the capture into a clean, sculptable Part with its colours, in one go: a watertight surface (floaters "+ "dropped, holes filled), quad topology at the chosen polygon budget with edge loops round the eyes and mouth "+ "when it is a face, and vertex paint or a texture. The splats stay (hidden). Runs in the background; Cancel "+ "stops it.",+ "一次将捕获转为干净、可雕刻且带有色彩的部件:封闭表面(去除浮点、填补孔洞)、按所选多边形预算的四边面拓扑(脸"+ "部时在眼睛与嘴巴周围有边环),以及顶点绘制或贴图。Splat 会保留(隐藏)。在后台运行;“取消”可停止。"},+ {"Quad Remesh the scan along the face guides you checked, then colour it: the sculptable Part appears next to the "+ "scan (which is hidden).",+ "按你勾选的脸部导引对扫描运行 Quad Remesh,然后上色:可雕刻部件会出现在扫描旁(扫描会被隐藏)。"},+ {"Place the face landmarks yourself, one click each: the eye corners, the nose tip, the mouth corners and the "+ "chin (the panel says which is next). For faces the automatic search misses.",+ "自行放置脸部特征点,每点单击:眼角、鼻尖、嘴角与下巴(面板会告诉你下一个是哪个)。适用于自动搜索找不到的脸。"},+ {"Only the splats inside the box count: drag the box's face handles in the viewport to cut away the ground, the "+ "background or a stand.",+ "只计算方块内的 Splat:在视口中拖动方块各面的控制点,即可裁掉地面、背景或支架。"},+ {"Working in the background; the new Part appears when it's done.", "正在后台处理;完成后会出现新部件。"},+ {"Stop Make sculptable; nothing changes.", "停止“转为可雕刻”;不会有任何更改。"},+ {"Leave the review without remeshing (the scan Part stays as it is).",+ "不重新网格化即离开查看(扫描部件维持原样)。"},+ {"Look for the face again from the current view (turn the view to face it first).",+ "从当前视图重新查找脸部(请先转动视图正对脸部)。"},+ {"How finely the surface follows the capture: voxels across the subject. Higher keeps thinner parts and more "+ "detail but takes longer (about 5 s at 384 for a million splats).",+ "表面贴合捕获的精细程度:横跨主体的体素数。越高保留越细的部分与越多细节,但耗时较长(100 万个 Splat 在 384 时约 "+ "5 秒)。"},+ {"When the capture is a head, find the eyes, nose, mouth and chin as seen from the current view and give Quad "+ "Remesh edge loops round the eyes and mouth and along the nasolabial folds, mirrored across the face (animation "+ "topology). Turn the view to face it first.",+ "捕获为头部时,从当前视图找出眼睛、鼻子、嘴巴与下巴,并为 Quad Remesh 提供眼睛与嘴巴周围及沿法令纹的边环,左右镜"+ "像(动画用拓扑)。请先转动视图正对脸部。"},+ {"Stop after the scan to check the face landmarks and the loops: drag a dot to move it, or place them by hand, "+ "then Finish.",+ "扫描后暂停,以检查脸部特征点与边环:拖动圆点即可移动,或手动放置,再按“完成”。"},+ {"The capture's colours go into the vertices (vertex paint): more polygons, more colour detail.",+ "捕获的色彩会写入顶点(顶点绘制):多边形越多,色彩细节越多。"},+ {"Auto UV the result and bake the capture's colours into a 2K texture (sharp colour on a light mesh, for games "+ "and exports).",+ "为结果自动 UV,并将捕获的色彩烘焙到 2K 贴图(轻量网格上的清晰色彩,适用于游戏与导出)。"},+ {"Keep the dense voxel surface as a hidden \"<name> Scan\" Part, to Project Detail more detail from later.",+ "将高密度体素表面保留为隐藏的“<name> Scan”部件,以便之后用 Project Detail 获取更多细节。"},+ {"Splats fainter than this are ignored (haze and floaters are usually faint).",+ "比此值更淡的 Splat 会被忽略(雾气与浮点通常很淡)。"},+ {"Seal gaps up to this many voxels between splats.", "封闭 Splat 之间最多这么多体素的间隙。"},+ {"Fill big holes such as the open bottom of a subject standing on a table (space boxed in on five sides counts as "+ "inside). Turn off for open cavities like a cup.",+ "填补大型孔洞,例如放在桌上的主体开放的底部(五面封闭的空间视为内部)。开放的凹洞(如杯子)请关闭。"},+ {"Keep every solid piece instead of only the largest (floaters come back too).",+ "保留每个实心区块,而不只是最大的(浮点也会回来)。"},+ // --- PanelSelectionSets.cpp (tools/i18n/coverage.py) ---+ {"Set name", "集合名称"},+ {"Name of the set Store makes; storing again with the same name replaces it.",+ "“保存”创建的集合名称;以相同名称再次保存会替换它。"},+ {"Store", "保存"},+ {"Store the checked channels of this Part as a named set (one undo step). Sets restore at any subdivision level "+ "and are saved in the project.",+ "将此部件勾选的通道保存为命名集合(一个撤销步骤)。集合可在任何细分层级还原,并保存在项目中。"},+ {"From Visible", "从可见部分"},+ {"Quick set: store the faces shown right now (Visible, Visible 2, ...).",+ "快速集合:保存当前显示的面(Visible、Visible 2、...)。"},+ {"Restore mode", "还原模式"},+ {"How Restore meets the current mask and visibility: Replace them, or Union, Intersect or Subtract the set's. "+ "Combine uses the same mode (not Replace) to make a new set from two.",+ "“还原”与当前遮罩及可见性的结合方式:替换,或与集合的进行联集、交集或相减。“合并”使用相同模式(替换除外)从"+ "两个集合创建新集合。"},+ {"No sets yet: Store saves one.", "尚无集合:按“保存”创建一个。"},+ {"Put the selected set's channels back (not its shape: Morph to Set does that), carried to the current "+ "subdivision level. One undo step.",+ "还原所选集合的通道(不含形状:那是“变形至集合”的功能),并带到当前细分层级。一个撤销步骤。"},+ {"Delete the selected set (undo brings it back).", "删除所选集合(可撤销恢复)。"},+ {"Combine", "合并"},+ {"Make a new set from the selected one and this one by their mask and visibility, with the mode above (Union, "+ "Intersect or Subtract).",+ "按遮罩与可见性,以上方的模式(联集、交集或相减)从所选集合与此集合创建新集合。"},+ {"Clear Morph Target", "清除 Morph 目标"},+ {"Morph Target", "Morph 目标"},+ {"Make this set's shape the Morph brush's target and pick the Morph brush: strokes pull the surface back toward "+ "the stored shape (Alt pushes away), at any subdivision level.",+ "将此集合的形状设为 Morph 笔刷的目标并选择 Morph 笔刷:笔触会将表面拉回保存的形状(Alt 则推开),可在任何细分层"+ "级使用。"},+ {"Morph to Set", "变形至集合"},+ {"Move the whole surface toward the set's shape by the amount below, within the mask. One undo step.",+ "在遮罩范围内,按下方的量将整个表面移向集合的形状。一个撤销步骤。"},+ {"Amount %.2f", "量 %.2f"},+ {"Store with Shape checked to morph toward a set.", "勾选“形状”再保存,即可变形至集合。"},+ // --- PanelSplatTrain.cpp (tools/i18n/coverage.py) ---+ {"Train a Gaussian splat from a video of an object (walk slowly all the way around it). The sharpest frame of "+ "each moment is used. The splat shows in the viewport after a few hundred steps and sharpens live.",+ "从物体的视频训练高斯 Splat(慢慢绕物体走一整圈)。每个时刻会使用最清晰的帧。数百步后 Splat 会出现在视口中,并"+ "实时变得更清晰。"},+ {"Train a Gaussian splat from a folder: photos taken all around an object, a phone-link capture, or a COLMAP / "+ "nerfstudio dataset (which already has camera positions).",+ "从文件夹训练高斯 Splat:环绕物体拍摄的照片、手机链接的捕获,或 COLMAP/nerfstudio 数据集(已含相机位置)。"},+ {"Stop training now and keep what it has learned (the newest checkpoint) as the result.",+ "立即停止训练,并保留当前学到的内容(最新的检查点)作为结果。"},+ {"Stop training. Nothing is saved; the last preview stays in the viewport until you Clear the splats.",+ "停止训练。不会保存任何内容;最后的预览会留在视口中,直到你清除 Splat。"},+ {"Use a Brush trainer you already have (brush_app): for example one you built yourself with cargo on Linux ARM, "+ "where there is no ready-made download.",+ "使用你已有的 Brush 训练器 (brush_app):例如你在 Linux ARM 上用 cargo 自行构建的版本,那里没有现成的下载。"},+ {"Use a COLMAP program you already have (it finds where each photo was taken).",+ "使用你已有的 COLMAP 程序(它会找出每张照片的拍摄位置)。"},+ {"Download it once from its GitHub release; nothing else is sent.",+ "从其 GitHub 发布版本下载一次;不会发送其他任何数据。"},+ // --- PanelSupportCard.cpp (tools/i18n/coverage.py) ---+ {"I'm already a member", "我已经是会员"},+ {"Signs in with GitHub, as member builds do (Preferences > Updates): no more membership cards, and the member "+ "builds are on.",+ "以 GitHub 登录,与会员版本相同(偏好设置 > 更新):不再显示会员卡片,并打开会员版本。"},+ // --- PanelTexture.cpp (tools/i18n/coverage.py) ---+ {"Paint into the vertices (vertex paint): the colour resolution is the mesh's. Shown when the Part has a texture "+ "(Tool > Texture Map).",+ "绘制到顶点(顶点绘制):色彩分辨率取决于网格。部件有贴图时显示(工具 > 贴图)。"},+ {"Paint into the Part's texture: the colour resolution comes from the texture, not the mesh. The Paint brush, Rgb "+ "sculpting, fills and Paint Layers all work on it.",+ "绘制到部件的贴图:色彩分辨率来自贴图而非网格。Paint 笔刷、Rgb 雕刻、填满与绘制图层都作用于贴图。"},+ {"Start texture painting: give the Part a texture (the size chosen in Tool > Texture Map, 2K by default) so paint "+ "goes into texels instead of vertices, and the detail comes from the texture, not the mesh. Without UVs, Auto "+ "UV unwraps the model first (in the background, with its progress in the status bar).",+ "开始贴图绘制:为部件加上贴图(大小在工具 > 贴图中选择,默认 2K),让绘制写入纹素而非顶点,细节来自贴图而非网"+ "格。没有 UV 时,自动 UV 会先展开模型(在后台进行,进度显示在状态栏)。"},+ {"Show the painted texture on the model (multiplied over the material, like vertex paint).",+ "在模型上显示绘制的贴图(以色彩增值叠在材质上,与顶点绘制相同)。"},+ {"Unwrap the Part automatically: cut it into UV islands and pack them, so any sculpt can carry a texture. "+ "Replaces existing UVs (undoable). Runs in the background; big meshes can take a minute or more.",+ "自动展开部件:切割成 UV 岛并打包,让任何雕刻都能带有贴图。会替换现有的 UV(可撤销)。在后台运行;大型网格可能"+ "需要一分钟以上。"},+ {"Give the Part a texture of the chosen size to paint into (white). Needs UVs: Auto UV makes them. Replaces an "+ "existing texture (undoable).",+ "为部件加上所选大小的贴图以供绘制(白色)。需要 UV:自动 UV 可生成。会替换现有贴图(可撤销)。"},+ {"Show the texture with the UV layout drawn over it, below these buttons.",+ "在这些按钮下方显示叠有 UV 布局的贴图。"},+ {"Bake the vertex paint (all paint layers) into the active texture layer. Makes a 2K texture if there is none.",+ "将顶点绘制(所有绘制图层)烘焙到当前贴图图层。若没有贴图会创建 2K 贴图。"},+ {"Copy the texture into the vertex paint of every vertex (detail finer than the mesh is lost).",+ "将贴图复制到每个顶点的顶点绘制(比网格更细的细节会遗失)。"},+ {"Save the texture (every visible layer composited) as a PNG image.",+ "将贴图(合成所有可见图层)保存为 PNG 图像。"},+ {"Load an image as the Part's texture (replacing its layers; undoable).",+ "加载图像作为部件的贴图(替换其图层;可撤销)。"},+ {"Remove the Part's texture (undoable). Painting goes back to the vertices.",+ "移除部件的贴图(可撤销)。绘制会回到顶点。"},+ {"Voxel Remesh and Quad Remesh keep a painted texture: the new mesh gets Auto UVs and the texture (every layer) "+ "is projected onto it from the old surface, in the same undo step. Off: the texture is dropped. Merging Parts "+ "keeps textures too. Shown under Remesh and Quad Remesh when the Part has a texture.",+ "体素重新网格化与 Quad Remesh 会保留绘制贴图:新网格会自动 UV,贴图(所有图层)会从旧表面投影上去,属于同一个撤"+ "销步骤。关闭:丢弃贴图。合并部件也会保留贴图。部件有贴图时显示于重新网格化与 Quad Remesh 下方。"},+ {"Keep the painted texture: the new mesh gets Auto UVs and the texture (every layer) is projected onto it from "+ "the old surface, in the same undo step (it adds the Auto UV time). Off: the texture is dropped. Scripts: "+ "keep_texture=false.",+ "保留绘制贴图:新网格会自动 UV,贴图(所有图层)会从旧表面投影上去,属于同一个撤销步骤(会增加自动 UV 的时间)"+ "。关闭:丢弃贴图。脚本:keep_texture=false。"},+ {"Unwrapping the Part in the background; you can keep working.", "正在后台展开部件;你可以继续工作。"},+ {"Size of a new texture: 1K, 2K (the default), 4K or 8K texels square. Bigger holds finer paint and uses more "+ "memory (8K: 256 MB per layer).",+ "新贴图的大小:边长 1K、2K(默认)、4K 或 8K 纹素。越大可容纳越细的绘制,也使用越多内存(8K:每个图层 256 MB)"+ "。"},+ {"The texture with the Part's UV layout over it (island borders on big meshes). Paint on the model; the texture "+ "fills in here.",+ "叠有部件 UV 布局的贴图(大型网格只显示岛边界)。在模型上绘制;贴图会在此处填入。"},+ // --- PanelTimeline.cpp (tools/i18n/coverage.py) ---+ {"Show or hide the history strip along the top or bottom of the canvas (Preferences > Interface > Timeline "+ "position): every stroke and operation as a tick. Drag to see the model at any point, click to go there; "+ "sculpting from an earlier point keeps the old continuation as a branch. Right-click a stroke to change its "+ "strength.",+ "在画布上方或下方显示或隐藏历史记录条(偏好设置 > 界面 > 时间轴位置):每个笔触与操作都是一个刻度。拖动即可查"+ "看任何时间点的模型,单击即可跳转;从较早的时间点继续雕刻时,原本的后续会保留为分支。在笔触上按右键可更改其强度"+ "。"},+ {"Timeline position: the Sculpt Timeline strip runs along the top of the viewport, below the top shelf and away "+ "from the brushes on the bottom shelf (the default). Saved automatically.",+ "时间轴位置:雕刻时间轴条位于视口顶端,在顶部工具栏下方,远离底部工具栏的笔刷(默认)。自动保存。"},+ {"Timeline position: the Sculpt Timeline strip runs along the bottom of the viewport, above the brush shelf. "+ "Saved automatically.",+ "时间轴位置:雕刻时间轴条位于视口底部,在笔刷工具栏上方。自动保存。"},+ {"Render the history of the active Part as a turntable timelapse video (1080p or 4K MP4, no captions).",+ "将当前部件的历史记录渲染为转盘延时视频(1080p 或 4K MP4,无字幕)。"},+ {"Measure how responsive sculpting is on this computer: the standard scene (a 15 or 33 million triangle head; "+ "Clay small, medium and large, Move, Smooth and a 240 px brush) through the same code a pen uses, with a live "+ "display of frame times and how far the stroke trails the pointer. Writes a video and a JSON result you can "+ "share. Replaces the scene.",+ "测量这台电脑上雕刻的响应速度:标准场景(1500 万或 3300 万个三角面的头部;小、中、大 Clay、Move、Smooth 与 240"+ " px 笔刷),使用与数位笔相同的代码,并实时显示帧时间与笔触落后指针的距离。会写出可分享的视频与 JSON 结果。会"+ "替换场景。"},+ {"Open the history strip.", "打开历史记录条。"},+ {"Also save the history beside the project as <name>.sfhist (strokes, masks, vertex paint, visibility; a topology "+ "change cuts it). Opening the project brings it back.",+ "另将历史记录以 <name>.sfhist 保存在项目旁(笔触、遮罩、顶点绘制、可见性;拓扑更改会使其中断)。打开项目时会一并"+ "加载。"},+ {"Render this history as a turntable timelapse video.", "将此历史记录渲染为转盘延时视频。"},+ {"Fold the timeline into a tab.", "将时间轴折叠为选项卡。"},+ {"How strongly this stroke shows: 1 = as sculpted, 0 = gone, 2 = twice as strong. Later strokes are not redone: "+ "where they overlap this one they keep their own displacement on top.",+ "此笔触的显示强度:1 = 雕刻时的样子,0 = 消失,2 = 两倍强。之后的笔触不会重做:与此笔触重叠之处会保留它们自己的"+ "位移在上方。"},+ // --- PanelUpdate.cpp (tools/i18n/coverage.py) ---+ {"Downloading the update...", "正在下载更新..."},+ {"It installs when you quit.", "退出程序时安装。"},+ {"Restart now", "立即重新启动"},+ {"Install it when you quit SculptForge; the next start is the new version.",+ "退出 SculptForge 时安装;下次启动即为新版本。"},+ {"Update banner", "更新横幅"},+ {"Starting SculptForge %s...", "正在启动 SculptForge %s..."},+ {"The update didn't work: %s.", "更新失败:%s."},+ {"Nothing was changed. Download it from the website instead, or try again.",+ "未更改任何内容。请改从网站下载,或再试一次。"},+ {"Update with your package manager (%s)", "使用包管理器更新 (%s)"},+ {"Copy", "复制"},+ {"Download the new package from the website and open it.", "从网站下载新的安装包并打开。"},+ {"Try again", "再试一次"},+ {"Update", "更新"},+ {"Download the new version from SculptForge's GitHub releases, check its signature and checksum, and install it. "+ "The current version is kept until the new one has started.",+ "从 SculptForge 的 GitHub 发布版本下载新版本,检查签章与总和检查码后安装。当前版本会保留到新版本成功启动为止。"},+ {"Asking GitHub...", "正在询问 GitHub..."},+ {"On GitHub, enter this code:", "请在 GitHub 输入此代码:"},+ {"Open github.com/login/device", "打开 github.com/login/device"},+ {"Waiting for GitHub...", "正在等待 GitHub..."},+ {"Member builds", "会员版本"},+ {"Member and Studio members get each release early. Sign in with the GitHub account that has the invitation to "+ "the member repository: SculptForge then also offers the member builds, checked with the same signature as "+ "every release. The sign-in can only read that repository's releases; it is kept in your system's keychain and "+ "Sign out removes it.",+ "Member 与 Studio 会员可抢先获取每个版本。请以收到会员仓库邀请的 GitHub 账号登录:SculptForge 之后也会提供会员版"+ "本,并以与所有版本相同的签章检查。此登录只能读取该仓库的发布版本;它保存在系统的钥匙圈中,按“退出登录”即可移"+ "除。"},+ {"Signed in with GitHub.", "已以 GitHub 登录。"},+ {"Signed in as %s on GitHub.", "已以 %s 身份登录 GitHub。"},+ {"Sign out", "退出登录"},+ {"Sign in with GitHub", "以 GitHub 登录"},+ // --- PanelUvEditor.cpp (tools/i18n/coverage.py) ---+ {"UV Editor", "UV 编辑器"},+ {"Open the UV Editor: the Part's UV layout in 2D over the UDIM tiles. Select vertices, edges, faces or islands "+ "(here or on the model), move, rotate and scale them, mark seams, unwrap, pack, set texel density and lay "+ "islands into trim sheet strips. Stretch and texel density show live on the model while you edit.",+ "打开 UV 编辑器:在 UDIM 图块上以 2D 显示部件的 UV 布局。可选择顶点、边、面或岛(在此或在模型上),移动、旋转与"+ "缩放,标记接缝、展开、打包、设置纹素密度,并将岛放入装饰贴图的条带。编辑时,拉伸与纹素密度会实时显示在模型上。"},+ {"Select UV vertices, edges, faces or whole islands (1-4 while the pointer is over the UV view). The selection "+ "converts when you switch.",+ "选择 UV 顶点、边、面或整个岛(指针在 UV 视图上时按 1-4)。切换时选择范围会跟着转换。"},+ {"Unwrap", "展开"},+ {"Unwrap with the chosen method: the selected faces (fitted where they were), or the whole Part (packed). Least "+ "Stretch keeps angles and lengths along the marked seams; Conformal keeps angles; By Face Groups cuts along the "+ "face group borders too; Planar projects each piece; Unfold flattens the current islands again in place, "+ "keeping pins; Auto Seams finds its own. Closed pieces get cut automatically. Big meshes unwrap in the "+ "background.",+ "以所选方法展开:所选的面(在原位拟合),或整个部件(并打包)。Least Stretch 沿标记的接缝保留角度与长度"+ ";Conformal 保留角度;By Face Groups 也沿面组边界切割;Planar 投影每个区块;Unfold 在原位重新摊平当前岛并保留"+ "固定;Auto Seams 自行找出接缝。封闭的区块会自动切开。大型网格会在后台展开。"},+ {"Pack", "打包"},+ {"Pack the selected islands (or all) as large as they fit into the 0-1 tile, or across the Columns x Rows grid of "+ "UDIM tiles: turned to their smallest box, scaled to one texel density, with the margin between them.",+ "将所选的岛(或全部)以能放下的最大尺寸打包到 0-1 图块,或打包到列数 x 行数的 UDIM 图块格中:旋转到最小包围框,缩"+ "放到相同纹素密度,并保留其间的边距。"},+ {"Mark Seam", "标记接缝"},+ {"Mark the selected edges (or the border of the selected faces) as seams: Unwrap cuts there.",+ "将所选的边(或所选面的边界)标记为接缝:展开时会在此切开。"},+ {"Clear Seam", "清除接缝"},+ {"Clear the seams on the selected edges (or the border of the selected faces).",+ "清除所选边(或所选面的边界)上的接缝。"},+ {"Mark every face group border as a seam.", "将每个面组边界标记为接缝。"},+ {"Island Borders", "岛边界"},+ {"Mark every current UV island border as a seam (keeps an imported layout's cuts for Unwrap).",+ "将当前每个 UV 岛的边界标记为接缝(为展开保留导入布局的切口)。"},+ {"Sharp Edges", "锐利边"},+ {"Mark every edge sharper than the angle as a seam (hard-surface models).",+ "将比该角度更锐利的每条边标记为接缝(硬表面模型)。"},+ {"Clear All", "全部清除"},+ {"Clear every marked seam.", "清除所有标记的接缝。"},+ {"Seam Tool", "接缝工具"},+ {"Draw seams on the model: drag along the edges you want cut (each stretch follows the shortest edge path); "+ "Alt+drag clears them. Seams show in red on the model while the UV Editor is open.",+ "在模型上绘制接缝:沿你要切开的边拖动(每段会沿最短的边路径);Alt+拖动可清除。UV 编辑器打开时,接缝会以红色显示"+ "在模型上。"},+ {"Select in 3D", "在 3D 中选择"},+ {"Select on the model: click or drag over it to select faces, islands, vertices or edges (the UV Editor's mode); "+ "Alt removes. The selection shows in both views.",+ "在模型上选择:在模型上单击或拖动即可选择面、岛、顶点或边(按 UV 编辑器的模式);Alt 取消选择。选择范围会同时"+ "显示在两个视图中。"},+ {"Pin", "固定"},+ {"Pin the selected UVs: Unfold and Unwrap keep them where they are (P over the UV view).",+ "固定所选的 UV:Unfold 与展开会让它们维持原位(在 UV 视图上按 P)。"},+ {"Unpin", "取消固定"},+ {"Unpin the selected UVs (Alt+P over the UV view).", "取消固定所选的 UV(在 UV 视图上按 Alt+P)。"},+ {"Weld", "焊接"},+ {"Weld the selected vertices: where they meet across a seam they become one UV each (the seam goes). W over the "+ "UV view.",+ "焊接所选顶点:在接缝两侧相接处各自合为一个 UV(接缝消失)。在 UV 视图上按 W。"},+ {"Split", "分离"},+ {"Split the selection off: the selected edges, or the border of the selected faces, become seams so the faces "+ "move on their own (Y over the UV view).",+ "分离选择范围:所选的边或所选面的边界会成为接缝,让这些面可以独立移动(在 UV 视图上按 Y)。"},+ {"Straighten", "拉直"},+ {"Line the selected vertices up on one horizontal or vertical line (an edge loop, a border).",+ "将所选顶点排成一条水平或垂直线(边环、边界)。"},+ {"Flip U", "翻转 U"},+ {"Mirror the selected islands (or all) left to right.", "将所选的岛(或全部)左右镜像。"},+ {"Flip V", "翻转 V"},+ {"Mirror the selected islands (or all) top to bottom.", "将所选的岛(或全部)上下镜像。"},+ {"Rotate 90", "旋转 90"},+ {"Turn the selection (or everything) a quarter turn counter-clockwise.",+ "将选择范围(或全部)逆时针旋转四分之一圈。"},+ {"Set", "设置"},+ {"Scale the selected islands (or all) to the target texel density.", "将所选的岛(或全部)缩放到目标纹素密度。"},+ {"Match", "统一"},+ {"Give the selected islands (or all) one texel density: their mean, so their sizes match on the surface.",+ "让所选的岛(或全部)使用相同的纹素密度:取其平均值,使它们在表面上的大小一致。"},+ {"Pick", "拾取"},+ {"Take the target texel density from the selected islands (or the whole Part).",+ "从所选的岛(或整个部件)获取目标纹素密度。"},+ {"Pack at Density", "按密度打包"},+ {"Pack at exactly the target texel density, using as many UDIM tiles as it takes (1001, 1002, ..., Columns wide, "+ "then the next row up): every island keeps the same texels per unit across the tiles.",+ "精确按目标纹素密度打包,使用所需数量的 UDIM 图块(1001、1002、...,宽度为列数,然后往上一行):每个岛在所有图块"+ "上保持相同的每单位纹素数。"},+ {"Assign to Strip", "分配到条带"},+ {"Lay the selected islands into the chosen trim sheet strip: turned lengthwise, scaled to the strip's height and "+ "lined up along u. The texture stays put, so the islands pick up the strip's look.",+ "将所选的岛放入所选的装饰贴图条带:沿长边转向,缩放到条带的高度并沿 u 对齐。贴图不动,因此岛会呈现该条带的外观。"},+ {"Fit the selection (or the whole layout) in the UV view (F over it).",+ "将选择范围(或整个布局)置入 UV 视图(在其上按 F)。"},+ {"What the faces show, here and on the model: Islands (a colour each), Stretch (green: true to the surface; "+ "yellow to red: stretched or squashed; magenta: folded over), Density (texel density; blue: fewer texels than "+ "the mean, red: more) or Plain.",+ "面所显示的内容(此处与模型上):岛(每个一种颜色)、拉伸(绿色:与表面一致;黄到红:拉伸或挤压;洋红:翻折)、"+ "密度(纹素密度;蓝色:低于平均,红色:高于平均)或单色。"},+ {"Behind the layout: nothing, a checker, or the painted texture (tile 1001).",+ "布局后方:无、棋盘格或绘制的贴图(图块 1001)。"},+ {"Colours on the model", "在模型上显示色彩"},+ {"Show the same colours on the model (islands, stretch, density and the selection), live while you edit.",+ "在模型上显示相同的色彩(岛、拉伸、密度与选择范围),编辑时实时更新。"},+ {"Checker", "棋盘格"},+ {"Checker on the model", "模型上的棋盘格"},+ {"A checker on the model's UVs (tinted per UDIM tile): squares that stay square mean no stretch.",+ "模型 UV 上的棋盘格(按 UDIM 图块着色):方格保持方正表示没有拉伸。"},+ {"Click to select (Shift adds, Ctrl removes), drag a box; drag the box handles to move, scale (corners) or rotate "+ "(the knob). Keys over the view: 1-4 modes, A all, Alt+A none, Ctrl+I invert, G / R / S move, rotate, scale (X "+ "/ Y lock an axis, Ctrl snaps), F frame, P / Alt+P pin, W weld, Y split. Wheel zooms, right or middle drag pans.",+ "单击即可选择(Shift 加选,Ctrl 减选),拖动出方框;拖动方框控制点可移动、缩放(角落)或旋转(旋钮)。视图上的按"+ "键:1-4 模式,A 全选,Alt+A 全不选,Ctrl+I 反转,G/R/S 移动、旋转、缩放(X/Y 锁定轴,Ctrl 贴齐),F 置入视图"+ ",P/Alt+P 固定,W 焊接,Y 分离。滚轮缩放,右键或中键拖动平移。"},+ {"Least Stretch: angles and lengths, along the marked seams (the default). Conformal (LSCM): angles only. By Face "+ "Groups: also cuts along the face group borders. Planar: each piece projected flat. Unfold Islands: the current "+ "islands flattened again where they are, keeping pins. Auto Seams: finds its own seams.",+ "Least Stretch:沿标记的接缝保留角度与长度(默认)。Conformal (LSCM):只保留角度。By Face Groups:也沿面组边界"+ "切割。Planar:每个区块投影摊平。Unfold Islands:在原位重新摊平当前岛,并保留固定。Auto Seams:自行找出接缝。"},+ {"Refine %.0f", "精修 %.0f"},+ {"Refine", "精修"},+ {"Least-stretch steps after the conformal start: more keeps lengths better (0 = conformal).",+ "在 Conformal 起始之后的最小拉伸步数:越多越能保持长度(0 = Conformal)。"},+ {"%.0f deg", "%.0f 度"},+ {"Sharp angle", "锐利角度"},+ {"Sharp Edges marks the edges whose faces meet at more than this angle.",+ "“锐利边”会标记两侧面以超过此角度相接的边。"},+ {"Margin %.0f px", "边距 %.0f px"},+ {"Margin", "边距"},+ {"Texels kept free between islands (half of it at the tile borders), at the texture's size.",+ "岛之间保留的空白纹素(图块边缘为一半),以贴图大小计算。"},+ {"Columns %.0f", "列数 %.0f"},+ {"Columns", "列数"},+ {"UDIM tiles across (along u, 1001 onwards; ten make a full UDIM row). Packing fills Columns x Rows tiles and "+ "never goes wider, also when it packs at a fixed texel density.",+ "横向的 UDIM 图块数(沿 u,从 1001 开始;十个为完整的一行 UDIM)。打包会填满列数 x 行数个图块,绝不会更宽,以固"+ "定纹素密度打包时也是如此。"},+ {"UDIM rows up (along v: 1011 sits above 1001). 10 Columns x 2 Rows fills 1001-1020; more tiles, more texels per "+ "island.",+ "往上的 UDIM 行数(沿 v:1011 位于 1001 上方)。10 列 x 2 行会填满 1001-1020;图块越多,每个岛的纹素越多。"},+ {"Turn islands to their smallest box and allow quarter turns, so more fit.",+ "将岛旋转到最小包围框并允许四分之一圈旋转,以放入更多岛。"},+ {"Equal density", "相同密度"},+ {"Scale the islands to one texel density before packing (off: they keep their sizes relative to each other).",+ "打包前将岛缩放到相同的纹素密度(关闭:保持彼此的相对大小)。"},+ {"The texture size densities and margins are measured at (the Part's texture's when it has one).",+ "用来计算密度与边距的贴图大小(部件有贴图时使用其大小)。"},+ {"Target density", "目标密度"},+ {"Texels per unit of surface length that Set and Pack at Density give the islands.",+ "“设置”与“按密度打包”为岛设置的每单位表面长度纹素数。"},+ {"Strips", "条带"},+ {"The sheet's horizontal strips: a count (4 equal strips), heights from the top (0.5,0.25,0.25), or v ranges "+ "(0-0.5;0.5-1). They show over tile 1001.",+ "贴图上的水平条带:数量(4 条等宽条带)、从上方起算的高度 (0.5,0.25,0.25),或 v 范围 (0-0.5;0.5-1)。显示在图块 "+ "1001 上。"},+ {"Fit width", "符合宽度"},+ {"Squeeze or stretch the row to fill u 0-1 exactly; off keeps the islands' proportions (trims repeat in u).",+ "压缩或拉伸该行以刚好填满 u 0-1;关闭时保持岛的比例(装饰在 u 方向重复)。"},+ {"Checker %.0f per tile", "每个图块 %.0f 格棋盘"},+ {"Paint stays on the model", "绘制保留在模型上"},+ {"When the Part has a painted texture, every UV edit moves the paint with it (re-projected onto the new layout in "+ "the same undo step), so the model looks the same. Off: the texture stays put and the model shows the UVs' new "+ "place on it (what trim sheets want).",+ "部件有绘制贴图时,每次编辑 UV 都会连同绘制一起移动(在同一个撤销步骤中重新投影到新布局),让模型外观不变。关闭"+ ":贴图不动,模型会显示 UV 在贴图上的新位置(装饰贴图需要这样)。"},+ // --- PanelVdm.cpp (tools/i18n/coverage.py) ---+ {"Load a vector displacement map for the VDM brush: a 32- or 16-bit OpenEXR from Blender's VDM Brush Baker (or "+ "any EXR whose RGB are X right, Y up, Z out of the surface, in brush radii) or a .sfvdm. It is kept in your "+ "brush library. You can also drop an .exr on the window.",+ "为 VDM 笔刷加载矢量位移贴图:Blender 的 VDM Brush Baker 生成的 32 或 16 位 OpenEXR(或任何 RGB 为 X 向右、Y "+ "向上、Z 朝表面外、以笔刷半径为单位的 EXR),或 .sfvdm。会保存在笔刷资源库中。也可以将 .exr 拖放到窗口中。"},+ {"Add a flat VDM plane to sculpt a new brush on: seen from the top, its border masked so it stays put; the other "+ "Parts are hidden. Sculpt anything (overhangs welcome), then Create VDM.",+ "添加平坦的 VDM 平面以雕刻新笔刷:从顶部观看,边界已遮罩以保持不动;其他部件会被隐藏。雕刻任何形状(欢迎悬垂结构"+ "),再按“创建 VDM”。"},+ {"Turn the sculpted VDM plane into a vector displacement brush: how far every point moved from the flat grid "+ "becomes the map, saved in your brush library and picked as the VDM brush's map Needs the VDM plane (its UVs "+ "record where each point started).",+ "将雕刻好的 VDM 平面转为矢量位移笔刷:每个点相对平坦网格的位移成为贴图,保存在笔刷资源库中,并设为 VDM 笔刷的贴"+ "图。需要 VDM 平面(其 UV 记录每个点的起始位置)。"},+ {"Save the VDM brush's map as a 32-bit float OpenEXR, for Blender: add it as the texture of a Draw brush with "+ "Area Plane mapping and Vector Displacement on (Help > User Guide > Sculpting > Vector displacement brushes).",+ "将 VDM 笔刷的贴图保存为 32 位浮点 OpenEXR,供 Blender 使用:将其设为 Draw 笔刷的贴图,使用 Area Plane 映射并"+ "打开 Vector Displacement(帮助 > 使用指南 > Sculpting > Vector displacement brushes)。"},+ {"For maps that store the surface normal in G instead of B (Y-up apps). Blender's maps and ours need nothing; "+ "maps from other apps depend on how they were exported, so try this if a stamp comes out lying on its side.",+ "适用于将表面法线存在 G 而非 B 的贴图(Y 轴朝上的软件)。Blender 与我们的贴图不需要;其他软件的贴图取决于导出方"+ "式,若印章侧躺请试试此选项。"},+ {"Mirror the map's sideways (R) channel when loading: for a stamp that comes out mirrored.",+ "加载时镜像贴图的侧向 (R) 通道:用于印章左右相反时。"},+ {"Mirror the map's up (G) channel when loading: for a stamp that leans the wrong way.",+ "加载时镜像贴图的向上 (G) 通道:用于印章倾向错误方向时。"},+ {"Negate the map's height (B) when loading: for a map that digs in where it should rise.",+ "加载时反转贴图的高度 (B):用于该隆起却凹陷的贴图。"},+ {"Multiply a loaded map's vectors: for maps saved in other units than the brush radius (1 = as stored).",+ "将已加载贴图的矢量相乘:用于以笔刷半径以外单位保存的贴图(1 = 按原样)。"},+ {"Quads per side of a new VDM plane. 256 is a good start; divide it (Ctrl+D) for finer detail.",+ "新 VDM 平面每边的四边面数。256 是不错的起点;细分 (Ctrl+D) 可得到更细的细节。"},+ {"What Create VDM calls the new map (a map of the same name is replaced).",+ "“创建 VDM”为新贴图取的名称(同名贴图会被替换)。"},+ {"Pixels a side of the map Create VDM makes. 256 holds most shapes; 512 for fine detail (Blender suggests 512 or "+ "less).",+ "“创建 VDM”所生成贴图每边的像素数。256 足以应付大多数形状;细节用 512(Blender 建议 512 以下)。"},+ // --- PanelVertexPaint.cpp (tools/i18n/coverage.py) ---+ {"The view's flat background colour. Choosing one switches the background to Flat Colour. It is saved "+ "automatically for the next session; projects keep their own.",+ "视图的纯色背景色彩。选择颜色会将背景切换为纯色。会自动保存到下一次会话;项目会保有自己的设置。"},+ {"Sculpt brushes also paint the colour", "雕刻笔刷也会绘制色彩"},+ {"The paint layer the Paint brush and fills write into. Add and arrange layers in Tool > Paint Layers.",+ "Paint 笔刷与填满所写入的绘制图层。可在工具 > 绘制图层中添加与排列图层。"},+ {"Remove all vertex paint from the Part, paint layers included (undoable).",+ "移除部件的所有顶点绘制,包括绘制图层(可撤销)。"},+ {"On a Part with no vertex paint, the colour above tints its Lit Sphere material, so you can try a skin, stone or "+ "metal tone without painting. Grey and black leave the material as it is. Vertex paint, once there, shows "+ "instead.",+ "在没有顶点绘制的部件上,上方的色彩会为其 Lit Sphere 材质着色,让你不必绘制就能试试皮肤、石头或金属的色调。灰色"+ "与黑色会让材质维持原样。有顶点绘制时则显示顶点绘制。"},+ {"Use a Lit Sphere image of your own: a lit sphere filling a square PNG, JPG or EXR. It joins the list and is "+ "kept in Documents/SculptForge/Lit Spheres; images you put in that folder show up when a material list opens. "+ "Right-click one of your Lit Spheres to remove it.",+ "使用你自己的 Lit Sphere 图像:填满正方形 PNG、JPG 或 EXR 的打光球体。它会加入列表并保存在 "+ "Documents/SculptForge/Lit Spheres;放进该文件夹的图像会在打开材质列表时出现。在你的 Lit Sphere 上按右键即可移除"+ "。"},+ {"Viewport Shading", "视口着色"},+ {"Environment", "环境"},+ {"The light around the model: Studio (generated), Photo Studio, Small Studio and Outdoor Sky. HDR files (.hdr, "+ ".exr) in the folders of SCULPTFORGE_HDRI_PATH are listed after them.",+ "模型周围的光线:Studio(生成)、Photo Studio、Small Studio 与 Outdoor Sky。SCULPTFORGE_HDRI_PATH 文件夹中的 "+ "HDR 文件 (.hdr、.exr) 会列在它们之后。"},+ {"Brightness of the light in stops: +1 doubles it.", "以级数表示的光线亮度:+1 为两倍。"},+ {"Exposure %+.1f EV", "曝光 %+.1f EV"},+ {"Turns the environment about the up axis, moving the highlights.", "绕向上轴旋转环境,移动高光位置。"},+ {"Tone map", "色调映射"},+ {"How bright light maps to the screen: ACES (filmic contrast), AgX (softer, keeps bright colours from going "+ "flat), Reinhard (gentle) or None.",+ "明亮光线映射到屏幕的方式:ACES(电影感对比)、AgX(较柔和,避免明亮色彩变平)、Reinhard(温和)或无。"},+ {"Show environment", "显示环境"},+ {"Show the environment behind the model instead of the background.", "在模型后方显示环境,而非背景。"},+ {"How soft the environment behind the model is.", "模型后方环境的柔和程度。"},+ {"Roughness of Parts without a material texture (their colour comes from vertex paint or the base colour).",+ "没有材质贴图的部件的粗糙度(其色彩来自顶点绘制或基础色)。"},+ {"Roughness %.2f", "粗糙度 %.2f"},+ {"Metallic of Parts without a material texture.", "没有材质贴图的部件的金属度。"},+ {"Metallic %.2f", "金属度 %.2f"},+ {"How much the sculpt's creases darken, so detail reads under even light. 0 is plain PBR.",+ "雕刻折痕变暗的程度,让细节在均匀光线下也清楚可见。0 为纯 PBR。"},+ // --- PanelView.cpp (tools/i18n/coverage.py) ---+ {"See through the other Parts to the active one (again: solid). With only the active Part shown, it is "+ "see-through itself (#80, #91).",+ "通过其他部件看到当前部件(再按一次:实体)。只显示当前部件时,它本身会变透明 (#80, #91)。"},+ {"Save Render writes a PNG (lossless).", "“保存渲染”写出 PNG(无损)。"},+ {"Save Render writes a JPG (smaller files, for sharing).", "“保存渲染”写出 JPG(文件较小,方便分享)。"},+ {"Size", "大小"},+ {"Save Render's longer side: twice the view (at most 4096 pixels), or 1080, 1920, 2048 or 4096 pixels.",+ "“保存渲染”的长边:视图的两倍(最多 4096 像素),或 1080、1920、2048、4096 像素。"},+ {"Light", "光线"},+ {"Light direction", "光线方向"},+ {"Drag on the ball to move the light around the model (the dot is the light); double-click puts it back where the "+ "material has it. Lit Sphere and studio shading.",+ "在球上拖动即可绕模型移动光线(圆点即光源);双击可回到材质的原始位置。适用 Lit Sphere 与摄影棚着色。"},+ {"How bright the light is: 1 is the material as made.", "光线亮度:1 为材质原本的样子。"},+ {"Ambient", "环境光"},+ {"Even light from everywhere that lifts the shadows, so the dark side still reads.",+ "来自各方向的均匀光线,提亮阴影,让暗面仍清楚可见。"},+ {"Ambient %.2f", "环境光 %.2f"},+ {"The material's own light again: direction, intensity and no ambient.",+ "回到材质自己的光线:方向、强度,且无环境光。"},+ {"PBR: Viewport Shading's rotation and exposure", "PBR:视口着色的旋转与曝光"},+ // --- Pickers.cpp (tools/i18n/coverage.py) ---+ {"Sort", "排序"},+ {"quad remesh Guides: draw curves on the model for Quad Remesh's edge loops to follow (a curve that ends where it "+ "started makes a loop). Alt+click a curve to delete it.",+ "Quad Remesh 导引:在模型上画曲线,让 Quad Remesh 的边环沿着它走(终点回到起点的曲线会形成环)。Alt+单击曲线即"+ "可删除。"},+ {"Brushes whose names start with this letter. Click to show only them.",+ "名称以此字母开头的笔刷。单击即可只显示这些笔刷。"},+ {"Brush packs", "笔刷资源包"},+ {"How far spray dabs land from the cursor, as a fraction of the brush size.",+ "Spray 笔触落在距光标多远处,以笔刷大小的比例表示。"},+ {"Stamp this vector displacement map with the VDM brush (Drag Stamp).",+ "以 VDM 笔刷压印此矢量位移贴图 (Drag Stamp)。"},+ {"Use any grayscale image as the alpha: white = full effect, black = none.",+ "使用任何灰阶图像作为 Alpha:白色 = 完整效果,黑色 = 无效果。"},+ {"Load image alphas as their negative (black = full effect).", "以负片加载图像 Alpha(黑色 = 完整效果)。"},+ {"The vertex paint colour (C over the model picks one).", "顶点绘制色彩(在模型上按 C 可吸取)。"},+ {"Click to swap with the second colour.", "单击即可与第二色彩交换。"},+ {"Click to swap it with the main colour.", "单击即可与主要色彩交换。"},+ // --- Precision.cpp (tools/i18n/coverage.py) ---+ {"Steady radius %.0f px", "稳定半径 %.0f px"},+ {"Steady radius", "稳定半径"},+ {"Length of the string the brush trails on: longer = steadier lines.",+ "笔刷拖在后面的那条线的长度:越长线条越稳定。"},+ {"Precision Intensity %.0f", "精确强度 %.0f"},+ {"Precision Intensity", "精确强度"},+ {"Hold Shift+Alt while drawing: the brush moves at a quarter of the pen's speed for careful placement, and dabs "+ "at this intensity. Let go and it glides back under the pen.",+ "绘制时按住 Shift+Alt:笔刷以笔的四分之一速度移动以便精确放置,并以此强度落下笔触。放开后会滑回笔下。"},+ {"Brush pressure curve", "笔刷压力曲线"},+ {"How pen pressure (left to right) becomes this brush's pressure (bottom to top), after the tablet's curve. Each "+ "brush keeps its own. Drag a point; double-click the curve to add one (up to 5); right-click a point to remove "+ "it.",+ "笔压(左到右)在经过数位板曲线后如何转换为此笔刷的压力(下到上)。每个笔刷各有自己的曲线。拖动点即可调整;在"+ "曲线上双击可添加点(最多 5 个);在点上按右键可移除。"},+ // --- RadialMenu.cpp (tools/i18n/coverage.py) ---+ {"Radial Menus", "饼菜单"},+ {"Pie menus of your own: hold a menu's key (or its mouse or pen button), flick toward an item and let go to run "+ "it. Tap the key instead and the pie stays open: click an item, or beside the pie to close it. Up to 8 menus of "+ "8 items; an item is anything the command palette (F3) finds.",+ "你自己的饼菜单:按住菜单的按键(或其鼠标、数位笔按钮),朝项目方向一拨再放开即可运行。若只是轻按按键,菜单会"+ "保持打开:单击项目,或单击菜单旁边即可关闭。最多 8 个菜单,每个 8 个项目;项目可以是命令面板 (F3) 能找到的"+ "任何东西。"},+ {"Add menu", "添加菜单"},+ {"A new radial menu (up to 8). Give it a key, then items.", "新的饼菜单(最多 8 个)。先指定按键,再加入项目。"},+ {"Key", "按键"},+ {"Click, then press the key that opens this menu (Esc cancels, Backspace clears). A key another action has moves "+ "here. Preferences > Hotkeys lists it too.",+ "单击,再按下打开此菜单的按键(Esc 取消,Backspace 清除)。原属其他操作的按键会移到这里。偏好设置 > 快捷键也会"+ "列出它。"},+ {"Button", "按钮"},+ {"A mouse or pen button that opens this menu while held, besides the key. It then stops doing what it did before "+ "(a pen button's Preferences > Tablet mapping, the middle button's pan, the right button's turn). Mouse buttons "+ "open it only when no modifier key is held: Alt+middle still pans, Alt+right still zooms (Maya style), "+ "Shift+right still turns the view.",+ "按住时打开此菜单的鼠标或数位笔按钮,与按键并用。之后它不再运行原本的功能(数位笔按钮在偏好设置 > 数位板中的对应"+ "、中键的平移、右键的旋转)。鼠标按钮只在未按住修饰键时打开菜单:Alt+中键仍为平移,Alt+右键仍为缩放(Maya 风格)"+ ",Shift+右键仍会旋转视图。"},+ {"Item", "项目"},+ {"Click to change its label, icon or action.", "单击即可更改其标签、图标或操作。"},+ {"Label", "标签"},+ {"What the pie shows for it; empty: the action's own name.", "菜单为它显示的文本;留空:使用操作本身的名称。"},+ {"Icon", "图标"},+ {"The icon the pie shows for it.", "菜单为它显示的图标。"},+ {"Save this menu as a .json file to share or keep (action names only).",+ "将此菜单保存为 .json 文件以分享或保留(只含操作名称)。"},+ {"Load a menu someone exported. Only action names are read; ones this version doesn't have are left out. Goes "+ "into this menu if it's empty, otherwise into a new one.",+ "加载别人导出的菜单。只读取操作名称;此版本没有的会跳过。若此菜单是空的就放入此菜单,否则放入新菜单。"},+ {"Empty this menu. Its key stays; an empty menu does nothing.", "清空此菜单。按键会保留;空菜单不会有任何作用。"},+ {"Restore default menus", "还原默认菜单"},+ {"Back to the three built-in menus: Brushes (T), Masking (Y) and Strokes (J).",+ "回到三个内置菜单:笔刷 (T)、遮罩 (Y) 与笔触 (J)。"},+ // --- Shell.cpp (tools/i18n/coverage.py) ---+ {"Sculpt brushes also paint the colour.", "雕刻笔刷也会绘制色彩。"},+ {"Front faces only: brushes leave the far side of thin parts alone.", "仅限正面:笔刷不会影响薄部件的另一侧。"},+ {"Brushes only reach the surface joined to the point under the cursor, within the brush size: the other leg, the "+ "next finger or a lip across a gap stay as they are (Blender's Connected Only). Saved with the preferences and "+ "the project.",+ "笔刷只影响与光标下的点相连、且在笔刷大小内的表面:另一条腿、旁边的手指或隔着缝隙的嘴唇都保持不变(Blender 的 "+ "Connected Only)。随偏好设置与项目保存。"},+ {"The brush falloff is measured on screen: everything inside the brush circle is reached, through the model and "+ "out the back, as a cylinder along the view (Blender's Projected from View). Turn on Connected only too to keep "+ "it to one piece.",+ "笔刷衰减以屏幕测量:笔刷圆圈内的一切都会受影响,会穿过模型到背面,如同沿视线方向的圆柱(Blender 的 Projected "+ "from View)。同时打开“仅限相连”即可限制在单一区块。"},+ {"Ctrl+drag paints the mask with the brush; Ctrl+Alt+drag erases it. Ctrl+drag on the background clears it.",+ "Ctrl+拖动以笔刷绘制遮罩;Ctrl+Alt+拖动擦除遮罩。在背景上 Ctrl+拖动可清除遮罩。"},+ {"Ctrl+drag draws a lasso and masks everything inside it; Ctrl+Alt+drag unmasks. The far side is included.",+ "Ctrl+拖动画出套索并遮罩其中的一切;Ctrl+Alt+拖动取消遮罩。包含背面。"},+ {"Ctrl+drag draws a rectangle and masks everything inside it; Ctrl+Alt+drag unmasks. The far side is included.",+ "Ctrl+拖动画出矩形并遮罩其中的一切;Ctrl+Alt+拖动取消遮罩。包含背面。"},+ {"Ctrl+Shift+drag a rectangle to keep what's inside and hide the rest; add Alt to hide the inside.",+ "按住 Ctrl+Shift 拖动矩形,保留其中的部分并隐藏其余;加按 Alt 则隐藏内部。"},+ {"Ctrl+Shift+drag a lasso to keep what's inside and hide the rest; add Alt to hide the inside.",+ "按住 Ctrl+Shift 拖动套索,保留其中的部分并隐藏其余;加按 Alt 则隐藏内部。"},+ {"Ctrl+Shift+drag a line: the shaded side is cut (Alt: the other side). Away removes it through the whole Part "+ "and closes the cut flat; In steps it down by Depth; Add raises it; Clip presses it flat onto the line.",+ "按住 Ctrl+Shift 拖动一条线:切割阴影侧(Alt:另一侧)。移除会穿过整个部件去除并以平面封闭切口;凹入会按深度降低"+ ";增加会使其隆起;裁平会将其压平到线上。"},+ {"Ctrl+Shift+drag a lasso: Away cuts a hole through the Part, In a pocket Depth deep, Add raises the shape, Clip "+ "presses what lies outside it onto its outline.",+ "按住 Ctrl+Shift 拖动套索:移除会在部件上切出贯穿的孔,凹入会挖出深度为“深度”的凹槽,增加会让形状隆起,裁平会"+ "将外侧部分压平到其轮廓上。"},+ {"Ctrl+Shift+drag a rectangle: Away cuts a hole through the Part, In a pocket Depth deep, Add a block, Clip "+ "presses what lies outside it onto its edges.",+ "按住 Ctrl+Shift 拖动矩形:移除会在部件上切出贯穿的孔,凹入会挖出深度为“深度”的凹槽,增加会加出方块,裁平会将"+ "外侧部分压平到其边缘上。"},+ {"Ctrl+Shift+click points: click the first point to cut the polygon, double-click or Enter to cut along an open "+ "bent line (Alt: the other side), Esc to drop it.",+ "按住 Ctrl+Shift 并单击各点:单击第一个点即可切割多边形,双击或 Enter 可沿开放折线切割(Alt:另一侧),"+ "Esc 放弃。"},+ {"Away", "移除"},+ {"Remove what the shape covers, through the whole Part, and close the cut with a flat cap.",+ "去除形状覆盖的部分(贯穿整个部件),并以平面封盖封闭切口。"},+ {"In", "凹入"},+ {"Cut a flat-bottomed pocket Depth deep where the shape covers the Part.",+ "在形状覆盖部件之处切出平底、深度为“深度”的凹槽。"},+ {"Add", "增加"},+ {"Add the shape, extruded Depth out of the surface, joined to the Part.",+ "加上形状,从表面挤出“深度”的距离,并与部件相连。"},+ {"Clip", "裁平"},+ {"Remove nothing: press the shaded side of a line, or everything outside a lasso or rectangle, flat onto the "+ "shape's outline, through the whole Part (#102). Hard-surface planes and clean silhouettes; the mask holds "+ "parts back.",+ "不移除任何东西:将线的阴影侧,或套索、矩形外的一切,贯穿整个部件压平到形状的轮廓上 (#102)。适合硬表面平面与干净"+ "的剪影;遮罩可固定部分区域。"},+ {"Pen pressure scales the brush strength.", "笔压调整笔刷强度。"},+ {"Pen pressure scales the brush size.", "笔压调整笔刷大小。"},+ {"Mirror strokes across X (left and right).", "沿 X 镜像笔触(左与右)。"},+ {"Mirror strokes across Y (top and bottom).", "沿 Y 镜像笔触(上与下)。"},+ {"Mirror strokes across Z (front and back).", "沿 Z 镜像笔触(前与后)。"},+ {"Radial symmetry: repeat strokes around an axis (Radial Copies copies, Transform palette).",+ "放射对称:绕轴重复笔触(副本数为“放射副本”,在变形调色板中)。"},+ {"Local symmetry: mirror and turn strokes about the active Part's centre instead of the world origin.",+ "区域对称:以当前部件的中心而非世界原点镜像与旋转笔触。"},+ {"Browse, search and install brushes other sculptors shared.", "浏览、搜索并安装其他雕刻者分享的笔刷。"},+ {"Wire", "线框"},+ {"Wireframe: show the polygons of the active Part (Shift+F).", "线框:显示当前部件的多边形 (Shift+F)。"},+ {"Colour each face group of the active Part.", "为当前部件的每个面组上色。"},+ {"Show or hide the mask (masked areas drawn darker). Hiding it keeps the mask: masked areas stay protected from "+ "brushes until you clear it.",+ "显示或隐藏遮罩(遮罩区域会画得较暗)。隐藏时遮罩仍保留:在你清除之前,遮罩区域仍受保护不受笔刷影响。"},+ {"Show vertex paint colours (off: plain material).", "显示顶点绘制色彩(关闭:纯材质)。"},+ {"Draw the sculpt.", "绘制雕刻。"},+ {"Open this menu. Its sections are the palettes of the Classic layout.",+ "打开此菜单。其各节即经典布局的调色板。"},+ {"Camera locked", "相机已锁定"},+ {"Find any command, palette, brush or material by name and run it.",+ "按名称查找任何命令、调色板、笔刷或材质并运行。"},+ {"Click to open or close the tray, drag to resize it. Palettes go in trays from their header icon.",+ "单击即可打开或关闭工具箱,拖动可调整大小。调色板可通过其标题图标放入工具箱。"},+ {"Shell", "界面"},+ {"Brush radius in screen pixels (0.5 to 800), and in mm on the surface under the cursor. [ and ] change it by "+ "10%, Shift+[ and Shift+] by 1 px, Ctrl+Shift+right-drag scrubs it finely; Ctrl+click to type.",+ "以屏幕像素表示的笔刷半径(0.5 到 800),以及光标下表面上的 mm。[ 与 ] 每次调整 10%, Shift+[ 与 Shift+] 每次 1"+ " px,Ctrl+Shift+右键拖动可细微调整;按住 Ctrl 并单击即可输入。"},+ {"Triangles you can see and sculpt (visible Parts, hidden parts left out) and in the whole scene. Micro: the "+ "micro triangles of the visible Parts' micro levels (Geometry > Micro).",+ "可见且可雕刻的三角面数(可见部件,不含隐藏部分)以及整个场景的三角面数。微细分:可见部件微细分层级中的微三角面"+ "(几何 > 微细分)。"},+ {"Ctrl held: the mask brush (Ctrl+Shift: the selection brush). Click, or press B with Ctrl held, to pick Mask "+ "Pen, Lasso Mask or Rectangle Mask (Select Rectangle or Select Lasso).",+ "按住 Ctrl:遮罩笔刷(Ctrl+Shift:选择笔刷)。单击,或按住 Ctrl 再按 B,即可选择 Mask Pen、Lasso Mask 或 "+ "Rectangle Mask(Select Rectangle 或 Select Lasso)。"},+ {"Ctrl held: the mask's stroke, Dots (Mask Pen), Lasso or Rect (Ctrl+Shift: the selection's). Click with Ctrl "+ "held to choose.",+ "按住 Ctrl:遮罩的笔触,Dots (Mask Pen)、Lasso 或 Rect(Ctrl+Shift:选择的笔触)。按住 Ctrl 再单击即可选择。"},+ // --- SpaceMouse.cpp (tools/i18n/coverage.py) ---+ {"Copy device report", "复制设备报告"},+ {"Copies what SculptForge sees (each joystick's name, USB ids and why it was or wasn't used) to paste into a bug "+ "report.",+ "复制 SculptForge 检测到的内容(每个摇杆的名称、USB ID 以及是否使用的原因),以贴到错误报告中。"},+ {"Experimental. A 3Dconnexion SpaceMouse moves the view with one hand while the other holds the pen: push, pull "+ "and twist the cap to pan, zoom and turn the model about the pivot. Read directly as a USB device, without "+ "3Dconnexion's driver; tested only with simulated input so far.",+ "实验性功能。3Dconnexion SpaceMouse 让你一手移动视图、另一手握笔:推、拉与扭转控制帽即可平移、缩放,并绕枢轴点旋"+ "转模型。直接以 USB 设备读取,不需要 3Dconnexion 的驱动程序;当前只以模拟输入测试过。"},+ {"Experimental. Off: the SpaceMouse is ignored.", "实验性功能。关闭:忽略 SpaceMouse。"},+ {"How fast the view moves for the same push on the cap.", "对控制帽施加相同推力时视图移动的速度。"},+ {"How far the cap must move before the view does, so a hand resting on it or a slightly off-centre cap doesn't "+ "drift the view.",+ "控制帽需移动多少视图才会跟着动,让放在上面的手或略微偏离中心的控制帽不会使视图飘移。"},+ {"The model stays upright: twisting turns it about the world's up axis, tilting looks over or under it, and "+ "rolling the cap does nothing.",+ "模型保持直立:扭转会绕世界的向上轴旋转,倾斜可从上方或下方观看,滚转控制帽则不起作用。"},+ {"Hold during strokes", "笔触期间保持"},+ {"While you sculpt, paint or mask, the SpaceMouse leaves the view alone and its buttons do nothing, so a hand "+ "resting on the cap never moves the model under the pen. Off: the view turns mid-stroke.",+ "在雕刻、绘制或遮罩时,SpaceMouse 不会移动视图,其按钮也不起作用,因此放在控制帽上的手绝不会让笔下的模型移动。关"+ "闭:笔触进行中视图也会旋转。"},+ {"Only the direction you push the most moves the view: a twist doesn't also pan a little.",+ "只有推力最大的方向会移动视图:扭转时不会顺带平移一点。"},+ {"Move the view the other way for this push or turn of the cap.", "对控制帽的此推力或扭转,反向移动视图。"},+ {"What the SpaceMouse reports now: Pan X, Zoom, Pan Y, Tilt, Roll, Spin. Grey: inside the dead zone.",+ "SpaceMouse 当前报告的值:Pan X、Zoom、Pan Y、Tilt、Roll、Spin。灰色:位于死区内。"},+ {"On, speed 1, dead zone 8%, nothing inverted, free rotation, held during strokes, all axes at once; left button "+ "Frame, right button Front view.",+ "打开,速度 1,死区 8%, 不反转,自由旋转,笔触期间保持,所有轴同时作用;左键为置入视图,右键为正视图。"},+ // --- StrokePopup.cpp (tools/i18n/coverage.py) ---+ {"Stroke popup", "笔触弹出窗口"},+ {"A grid at the cursor with the stroke types, the modifiers (Add / Sub, Smooth, Mask, Select) and the mask and "+ "Cut shapes. Hold the key, point at one and let go; or tap the key and click. Smooth, Mask, Select and the "+ "shapes stay on without holding Shift or Ctrl, until you pick them again or another brush.",+ "在光标处显示的方格,含笔触类型、修饰(Add/Sub、Smooth、Mask、Select)与遮罩及切割形状。按住按键、指向其中一个"+ "后放开;或轻按按键再单击。Smooth、Mask、Select 与形状不需按住 Shift 或 Ctrl 就会保持打开,直到你再次选择它们或"+ "选择其他笔刷。"},+ // --- Tablet.cpp (tools/i18n/coverage.py) ---+ {"Pressure", "压力"},+ {"No pressure? In Wacom Tablet Properties > Mapping, switch \"Use Windows Ink\" (on for most tablets, off for "+ "some older drivers), then bring the pen back. Without pressure the pen draws at full strength.",+ "没有压力?在 Wacom Tablet Properties > Mapping 中切换“Use Windows Ink”(大多数数位板打开,部分较旧的驱动程序"+ "关闭),再将笔移回来。没有压力时笔会以全强度绘制。"},+ {"Whether the pen reports pressure. Without it the pen draws at full strength; check the tablet in your desktop's "+ "tablet settings.",+ "数位笔是否报告压力。没有压力时笔会以全强度绘制;请在桌面环境的数位板设居中检查数位板。"},+ {"The pen SculptForge last saw, and whether it is in range or touching.",+ "SculptForge 最后检测到的数位笔,以及是否在感应范围内或正在接触。"},+ {"Turn on if the tablet driver is set to Mouse mode: the pen moves the cursor by how far it moves, and lifting it "+ "and putting it down elsewhere leaves the cursor where it was. Off (Pen mode): the cursor is where the pen is.",+ "若数位板驱动程序设为鼠标模式请开启:笔按移动距离移动光标,抬起后放到别处时光标维持原位。关闭(笔模式):光标就"+ "在笔的位置。"},+ {"The pen's pressure as the tablet reports it, and after the pressure curve below (what brushes get).",+ "数位板报告的笔压,以及经过下方压力曲线后的值(笔刷收到的值)。"},+ {"The pen's tilt, as the tablet reports it (brushes don't use it yet).",+ "数位板报告的笔倾斜角度(笔刷尚未使用)。"},+ {"Draw here with the pen: the stroke is as thick as the brush pressure, and the line at the bottom plots it along "+ "the stroke.",+ "在此用笔绘制:笔触粗细等于笔刷压力,下方的线会沿笔触绘出压力变化。"},+ {"How pen pressure (left to right) becomes brush pressure (bottom to top), before each brush's own curve. The dot "+ "is the pen right now.",+ "笔压(左到右)在应用各笔刷自己的曲线之前如何转换为笔刷压力(下到上)。圆点为笔当前状态。"},+ {"Below 1: soft, a light touch gives a lot. Above 1: firm, press harder.",+ "低于 1:较软,轻触就有很大效果。高于 1:较硬,需更用力按压。"},+ {"Brush pressure at the lightest touch.", "最轻触碰时的笔刷压力。"},+ {"Brush pressure when pressing fully.", "完全按压时的笔刷压力。"},+ {"Pen pressure below this counts as the lightest touch (ignores a resting hand).",+ "低于此值的笔压视为最轻触碰(忽略放在上面的手)。"},+ {"Pen pressure that already counts as pressing fully (for a light hand).",+ "达到此值即视为完全按压的笔压(适合手劲较轻的人)。"},+ {"Eraser", "橡皮擦"},+ {"What the pen's eraser end does. Invert: brushes subtract, like holding Alt (with Ctrl it erases mask). Erase "+ "mask: removes mask wherever it draws.",+ "笔尾橡皮擦的功能。反转:笔刷改为减去,如同按住 Alt(搭配 Ctrl 则擦除遮罩)。擦除遮罩:在绘制处移除遮罩。"},+ {"Eraser: Invert; lower button: Right-click; upper button: Invert (Alt); third button: Pan view. The curve and "+ "Mouse mode stay.",+ "橡皮擦:反转;下方按钮:右键单击;上方按钮:反转 (Alt);第三个按钮:平移视图。曲线与鼠标模式保持不变。"},+ {"These settings save themselves.", "这些设置会自动保存。"},+ // --- UserGuide.cpp (tools/i18n/coverage.py) ---+ {"Go back to the page you were reading.", "回到你正在阅读的页面。"},+ {"Back (Alt+Left)", "上一页 (Alt+Left)"},+ {"Go forward again.", "再次前进。"},+ {"Forward (Alt+Right)", "下一页 (Alt+Right)"},+ {"The guide's first page: every chapter.", "指南的第一页:所有章节。"},+ {"Find every place in the guide that mentions all of these words.", "查找指南中提到所有这些字词的每个地方。"},+ {"Clear the search", "清除搜索"},+ {"Read this page on the SculptForge website.", "在 SculptForge 网站上阅读此页面。"},+ // --- Shell.cpp (tools/i18n/coverage.py) ---+ {"Brushes change the shape. Turn on Rgb to paint colour at the same time.",+ "笔刷改变形状。打开 Rgb 即可同时绘制色彩。"},+ {"Paint colour without sculpting. Alt paints back to white, Shift still smooths.",+ "只绘制色彩而不雕刻。Alt 会绘回白色,Shift 仍为平滑。"},+ {"Brushes add to the surface. Hold Alt to subtract for one stroke.",+ "笔刷向表面增加。按住 Alt 可在单一笔触中减去。"},+ {"Sub", "减少"},+ {"Brushes subtract from the surface. Hold Alt to add for one stroke.",+ "笔刷从表面减去。按住 Alt 可在单一笔触中增加。"},+ {"Dynamic topology: brushes add triangles where they need detail and remove them where they don't, so you can "+ "pull out horns or fingers without stretching. Detail sets how small the triangles get; zoom in or shrink the "+ "brush for finer ones. Needs a mesh without subdivision levels; quads under the brush become triangles and UVs "+ "are dropped (Undo brings them back).",+ "动态拓扑:笔刷在需要细节处加入三角面,不需要处则移除,让你拉出角或手指而不会拉伸。“细节”设置三角面的大小;拉"+ "近视图或缩小笔刷可得到更细的三角面。需要没有细分层级的网格;笔刷下的四边面会变成三角面,UV 会被丢弃(可撤销恢复"+ ")。"},+ {"Lit Sphere shading (the default): the chosen material sphere or the studio lights, made for reading forms while "+ "sculpting.",+ "Lit Sphere 着色(默认):所选的材质球或摄影棚灯光,便于雕刻时判读形体。"},+ {"PBR shading: the texture's material channels (base colour, roughness, metallic, normal, height, AO, emissive) "+ "lit by an environment, as a game engine or renderer shows them. Meshes without a material use the roughness "+ "and metallic set here.",+ "PBR 着色:贴图的材质通道(基础色、粗糙度、金属度、法线、高度、AO、自发光)由环境照亮,如同游戏引擎或渲染器的呈"+ "现。没有材质的网格使用此处设置的粗糙度与金属度。"},+ {"Smooth", "平滑"},+ {"Smooth shading (the default): normals blend across polygons, so the surface reads as one form.",+ "平滑着色(默认):法线在多边形之间混合,让表面看起来是一个整体形体。"},+ {"Flat shading: every polygon shows its own face, so the mesh's structure and each stroke's effect on it read "+ "clearly. Parts set to Smooth or Flat keep their own. A preference, saved automatically.",+ "平面着色:每个多边形都显示自己的面,让网格结构与每一笔触的效果清楚可见。设为平滑或平面的部件保有自己的设置。这"+ "是偏好设置,自动保存。"},+ {"The view's background is the charcoal radial gradient (the default).", "视图背景为炭灰色放射渐变(默认)。"},+ {"The view's background is one solid colour (pick it below), without the gradient. A preference, saved "+ "automatically; projects keep their own.",+ "视图背景为单一纯色(在下方选择),没有渐变。这是偏好设置,自动保存;项目会保有自己的设置。"},+ {"Fill the screen with SculptForge (again: back to a window).", "让 SculptForge 填满屏幕(再按一次:回到窗口)。"},+ {"Show the Gaussian splat capture.", "显示高斯 Splat 捕获。"},+ {"Show only the active Part (again: show the others).", "只显示当前部件(再按一次:显示其他部件)。"},+ {"Drag on this button to pan the view (or Alt+drag the background).",+ "在此按钮上拖动即可平移视图(或 Alt+拖动背景)。"},+ {"Drag up and down on this button to zoom (or use the mouse wheel).",+ "在此按钮上上下拖动即可缩放(或使用鼠标滚轮)。"},+ {"Drag on this button to orbit the view (or drag the background).", "在此按钮上拖动即可环绕视图(或拖动背景)。"},+ {"Add a model file as a new Part.", "将模型文件加入为新部件。"},+ {"Save the visible Parts as Wavefront OBJ.", "将可见部件保存为 Wavefront OBJ。"},+ {"One GLB per level of detail.", "每个细节层级一个 GLB。"},+ {"OpenUSD for Apple, Omniverse and film pipelines.", "适用于 Apple、Omniverse 与电影流程的 OpenUSD。"},+ {"FBX sized and named for Unreal Engine, with LODs.", "按 Unreal Engine 调整大小与命名的 FBX,含 LOD。"},+ {"Save the Gaussian splats (PLY, glTF or USD).", "保存高斯 Splat(PLY、glTF 或 USD)。"},+ {"Close SculptForge (asks to save changes first).", "关闭 SculptForge(会先询问是否保存更改)。"},+ {"Rebuild as an even, watertight surface (like Voxel Remesh): merges parts, fixes scans and generated models.",+ "重建为均匀、封闭的表面(类似体素重新网格化):合并各部分,修复扫描与生成的模型。"},+ {"With Tool > Remesh > Quick Remesh on: remesh the active Part at the Voxel Remesh resolution, in the background.",+ "打开工具 > 重新网格化 > Quick Remesh 时:在后台以体素重新网格化的分辨率重新网格化当前部件。"},+ {"Quick Remesh (hold and drag)", "Quick Remesh(按住并拖动)"},+ {"With Tool > Remesh > Quick Remesh on: hold this key and click or drag on the background (not on the model) to "+ "remesh the active Part.",+ "打开工具 > 重新网格化 > Quick Remesh 时:按住此键并在背景上(不是模型上)单击或拖动,即可重新网格化当前部件。"},+ {"Turn the sculpt into Gaussian splats.", "将雕刻转为高斯 Splat。"},+ {"Fill the unmasked area with the colour.", "以该色彩填满未遮罩的区域。"},+ {"Hide or show the shelves and trays around the canvas.", "隐藏或显示画布周围的工具栏与工具箱。"},+ {"Show or hide the palette bar under the title.", "显示或隐藏标题下方的调色板栏。"},+ {"Open or close the left tray (or click its divider).", "打开或关闭左侧工具箱(或单击其分隔线)。"},+ {"Open or close the right tray (or click its divider).", "打开或关闭右侧工具箱(或单击其分隔线)。"},+ {"Menus by task (File, Edit, Sculpt, Paint, Mesh, View, Render, Help), a status bar and a one-row tool shelf.",+ "按工作分类的菜单(文件、编辑、雕刻、绘制、网格、视图、渲染、帮助)、状态栏与单行工具栏。"},+ {"The alphabetical palette bar and the two-row top shelf, as experienced sculptors expect.",+ "按字母排列的调色板栏与双行顶部工具栏,符合资深雕刻者的习惯。"},+ {"Palettes", "调色板"},+ // --- Config.cpp (tools/i18n/coverage.py) ---+ {"Press a key for '%s'", "请按下“%s”的按键"},+ {"Now:", "当前:"},+ {"none", "无"},+ {"Esc cancels, Backspace clears. A key that's taken moves here.",+ "Esc 取消,Backspace 清除。已被使用的按键会移到这里。"},+ {"No shortcut matches \"%s\".", "没有符合“%s”的快捷键。"},+ {"Double-click a row, or Ctrl+Alt+click any button, to assign a key.",+ "双击某一行,或 Ctrl+Alt+单击任何按钮,即可分配按键。"},+ // --- Input.cpp (tools/i18n/coverage.py) ---+ {"With Alt", "搭配 Alt"},+ {"With Ctrl", "搭配 Ctrl"},+ // --- PanelUvEditor.cpp (tools/i18n/coverage.py) ---+ {"On model", "模型上"},+ {"Seams (%zu edges)", "接缝(%zu 条边)"},+ {"Select", "选择"},+ // --- RadialMenu.cpp (tools/i18n/coverage.py) ---+ {"Right-drag opens this menu. Turn the view with %s.", "右键拖动会打开此菜单。以 %s 旋转视图。"},+ {"Action's own", "操作本身的"},+ {"Change action", "更改操作"},+ {"Add item", "添加项目"},+ {"No matching actions", "没有符合的操作"},+ {"Your menus save themselves", "你的菜单会自动保存"},+ // --- SpaceMouse.cpp (tools/i18n/coverage.py) ---+ {"No SpaceMouse found", "找不到 SpaceMouse"},+ {"Last button pressed: %d", "最后按下的按钮:%d"},+ // --- Tablet.cpp (tools/i18n/coverage.py) ---+ {"Pressure: no pen seen yet", "压力:尚未检测到数位笔"},+ {"Pressure: on", "压力:已启用"},+ {"Pressure: not detected", "压力:未检测到"},+ {"Pressure: touch the tablet to check", "压力:请触碰数位板以检查"},+ {"Troubleshooting", "故障排除"},+ {"No pen seen yet", "尚未检测到数位笔"},+ {"Tilt: not reported by this pen", "倾斜:此数位笔不报告"},+ {"Pressure curve (all brushes)", "压力曲线(所有笔刷)"},+ // --- UserGuide.cpp (tools/i18n/coverage.py) ---+ {"SculptForge is free and open source, and stays that way. If it helps your work, you can support its development.",+ "SculptForge 是自由且开源的软件,并将一直如此。如果它对你的工作有帮助,欢迎支持它的开发。"},+ {"Nothing in the guide matches \"%s\".", "指南中没有符合“%s”的内容。"},+ // --- core/RadialMenu.cpp (tools/i18n/coverage.py) ---+ {"None", "无"},+ {"Middle mouse button", "鼠标中键"},+ {"Mouse back button", "鼠标后退键"},+ {"Mouse forward button", "鼠标前进键"},+ {"Pen lower button", "数位笔下方按钮"},+ {"Pen upper button", "数位笔上方按钮"},+ {"Pen third button", "数位笔第三个按钮"},+ {"Right mouse button", "鼠标右键"},+ // --- PanelUvEditor.cpp (tools/i18n/coverage.py) ---+ {" (folds)", " (翻折)"},+ {"%zu seam edges marked", "已标记 %zu 条接缝边"},+ {"%u islands | %zu selected | stretch %.3f%s | %.0f tx/u at %dK | %s",+ "%u 个岛 | 已选择 %zu | 拉伸 %.3f%s | %.0f tx/u(%dK) | %s"},+ {"Density", "密度"},+ {"Edge", "边"},+ {"Face", "面"},+ {"Island", "岛"},+ {"Islands", "岛"},+ {"No Image", "无图像"},+ {"Plain", "单色"},+ {"Selected", "已选择"},+ {"Stretch", "拉伸"},+ {"Texel Density", "纹素密度"},+ {"Trim Sheet", "装饰贴图"},+ {"Unwrap Selected", "展开所选"},+ // --- Brush palette (tools/i18n/coverage.py) ---+ {"Filter brushes", "筛选笔刷"},+ {"Alphas", "Alpha"},+ {"Built-in", "内置"},+ {"Custom", "自定义"},+ {"Custom brushes", "自定义笔刷"},+ {"Larger brush by 1 px", "笔刷放大 1 px"},+ {"Smaller brush by 1 px", "笔刷缩小 1 px"},+ {"On", "开启"},+ {"Use global", "使用全局"},+ {"Reset Brush to Default", "重置笔刷为默认"},+ {"Save Brush Settings", "保存笔刷设置"},+ {"Sort: Recent", "排序:最近"},+ {"Stamp rotation", "印章旋转"},+ {"Vector displacement", "矢量位移"},+ {"World Size", "世界尺寸"},+ // --- Added on main after the conversion (UV Editor, Help > Connect an AI tool) ---+ {"No UVs yet: pick a method and Unwrap (or mark seams first)", "尚无 UV:选择一种方法并展开(或先标记接缝)"},+ {"No mesh", "没有网格"},+ {"Add to Cursor's global MCP file (or .cursor/mcp.json in a project).",+ "添加 Cursor 的全局 MCP 文件(或项目中的 .cursor/mcp.json)。"},+ {"Add to Kiro's user MCP file.",+ "添加 Kiro 的用户 MCP 文件。"},+ {"Add to Rovo Dev's MCP file (acli rovodev mcp opens it).",+ "添加 Rovo Dev 的 MCP 文件(acli rovodev mcp 会打开它)。"},+ {"Add to Zed's settings file (command palette: zed: open settings file).",+ "添加 Zed 的配置文件(命令面板:zed: open settings file)。"},+ {"Add to opencode.json.",+ "添加 opencode.json。"},+ {"Add to the global MCP file, then use it from Copilot Chat in Agent mode.",+ "添加全局 MCP 文件,然后在 Copilot Chat 的 Agent 模式中使用。"},+ {"Add to:",+ "添加:"},+ {"Add under extensions in Goose's configuration file (or goose configure > Add Extension > Command-Line Extension).",+ "添加 Goose 配置文件的 extensions 下(或 goose configure > Add Extension > Command-Line Extension)。"},+ {"Claude Code uses your Pro, Max or Ultra plan when you sign in with your Claude account. If ANTHROPIC_API_KEY is set, it uses that key and API billing instead.",+ "以 Claude 账号登录时,Claude Code 会使用你的 Pro、Max 或 Ultra 订阅。若设置了 ANTHROPIC_API_KEY,则改用该密钥并按 API 计费。"},+ {"Claude on the web and on phones can't start programs on your computer: use Claude Desktop or Claude Code.",+ "网页版与手机版 Claude 无法启动你电脑上的程序:请使用 Claude Desktop 或 Claude Code。"},+ {"Connect an AI tool",+ "连接 AI 工具"},+ {"Connect an AI tool...",+ "连接 AI 工具..."},+ {"Copied to the clipboard",+ "已复制到剪贴板"},+ {"Download the Claude Desktop bundle",+ "下载 Claude Desktop 扩展包"},+ {"Fields:",+ "字段:"},+ {"For Gemini Code Assist Standard or Enterprise, or a Gemini API key. Run once in a terminal.",+ "适用于 Gemini Code Assist Standard 或 Enterprise,或 Gemini API 密钥。在终端运行一次。"},+ {"Google's CLI for personal Google accounts (free, Google AI Pro and Ultra). Add this to its MCP file, then sign in with Google.",+ "Google 为个人 Google 账号(免费、Google AI Pro 与 Ultra)提供的 CLI。将此添加其 MCP 文件,然后以 Google 登录。"},+ {"I have a subscription to",+ "我订阅了"},+ {"In a terminal:",+ "在终端中:"},+ {"Let an AI assistant use SculptForge's tools: it starts sculptforge-cli on this computer and talks to it directly. Nothing listens on the network. The assistant works on its own scene and saves files where you ask; open them here to see the result.",+ "让 AI 助手使用 SculptForge 的工具:它会在这台电脑上启动 sculptforge-cli 并直接与之通信。没有任何东西在网络上监听。助手在自己的场景中工作,并把文件存到你指定的位置;在这里打开即可查看结果。"},+ {"Download the bundle for your system and install it in Claude Desktop under Settings > Extensions > Advanced settings. Or add SculptForge to its configuration file and restart it.",+ "下载适合你系统的扩展包,并在 Claude Desktop 的 Settings > Extensions > Advanced settings 中安装。或将 SculptForge 添加其配置文件后重新启动。"},+ {"Other tools",+ "其他工具"},+ {"Program tab > Install > Edit mcp.json, then paste this.",+ "Program 选项卡 > Install > Edit mcp.json,然后粘贴这段。"},+ {"Rovo in Atlassian's web apps only takes public HTTPS servers added by an admin: use Rovo Dev CLI.",+ "Atlassian 网页应用中的 Rovo 只接受由管理员添加的公开 HTTPS 服务器:请使用 Rovo Dev CLI。"},+ {"Run once in a terminal (Cline CLI), or paste into Cline's MCP settings (MCP Servers > Configure).",+ "在终端运行一次(Cline CLI),或粘贴到 Cline 的 MCP 设置(MCP Servers > Configure)。"},+ {"Run once in a terminal, or add to the user MCP file.",+ "在终端运行一次,或添加用户 MCP 文件。"},+ {"Run once in a terminal, or open the command MCP: Open User Configuration and add the entry.",+ "在终端运行一次,或打开命令 MCP: Open User Configuration 并添加此条目。"},+ {"Run once in a terminal, then choose Sign in with ChatGPT when Codex starts.",+ "在终端运行一次,然后在 Codex 启动时选择 Sign in with ChatGPT。"},+ {"Run once in a terminal.",+ "在终端运行一次。"},+ {"Run once in a terminal; it signs in with your Claude plan.",+ "在终端运行一次;它会以你的 Claude 订阅登录。"},+ {"Save as a file in your workspace's .continue/mcpServers folder; tools work in agent mode.",+ "保存为工作区 .continue/mcpServers 文件夹中的文件;工具在 agent 模式下运行。"},+ {"Settings > Agents > MCP servers > Add, then paste this.",+ "Settings > Agents > MCP servers > Add,然后粘贴这段。"},+ {"Settings > MCP Servers > +, then fill in these fields.",+ "Settings > MCP Servers > +,然后填入这些字段。"},+ {"Settings > Tools > AI Assistant > Model Context Protocol (MCP): Add, choose STDIO and paste this.",+ "Settings > Tools > AI Assistant > Model Context Protocol (MCP):Add,选择 STDIO 并粘贴这段。"},+ {"Since June 2026 personal Google accounts (free, Google AI Pro, Google AI Ultra) use Antigravity CLI; Gemini CLI is for Gemini Code Assist and API keys.",+ "自 2026 年 6 月起,个人 Google 账号(免费、Google AI Pro、Google AI Ultra)使用 Antigravity CLI;Gemini CLI 则用于 Gemini Code Assist 与 API 密钥。"},+ {"The ChatGPT app only connects to remote (HTTPS) servers, and SculptForge doesn't run one: nothing of yours listens on the network. Codex CLI runs on your computer and signs in with your ChatGPT plan.",+ "ChatGPT 应用只连接远程(HTTPS)服务器,而 SculptForge 不运行这种服务器:你的电脑上没有任何东西在网络上监听。Codex CLI 在你的电脑上运行,并以你的 ChatGPT 订阅登录。"},+ {"The Grok app (web, phone, X) can't reach programs on your computer, only public HTTPS servers: use Grok Build. xAI's documentation doesn't say which plans Grok Build's sign-in includes; it also takes an xAI API key.",+ "Grok 应用(网页、手机、X)无法连接到你电脑上的程序,只能连接公开的 HTTPS 服务器:请使用 Grok Build。xAI 的文档没有说明 Grok Build 的登录包含哪些订阅;它也接受 xAI API 密钥。"},+ {"Their documentation",+ "官方文档"},+ {"This install:",+ "此安装:"},+ {"Turn this off in Preferences > AI.",+ "可在偏好设置 > AI 中关闭。"},+ {"Use SculptForge from Claude, ChatGPT (Codex), Gemini, Grok, Cursor, VS Code and other AI tools: the exact command or settings for this install, with Copy buttons. The tool starts SculptForge on this computer; nothing listens on the network.",+ "从 Claude、ChatGPT(Codex)、Gemini、Grok、Cursor、VS Code 等 AI 工具使用 SculptForge:此安装的确切命令或设置,附复制按钮。该工具会在这台电脑上启动 SculptForge;没有任何东西在网络上监听。"},+ {"User guide: AI agents",+ "用户指南:AI 代理"},+ {"Your own agent in Python (uses the OpenAI API with an API key).",+ "你自己的 Python 代理(以 API 密钥使用 OpenAI API)。"},+ {"Your own code with the OpenAI, Gemini or xAI API: sculptforge-cli --schema prints every tool as JSON (examples in the user guide, Scripting > AI agents).",+ "以 OpenAI、Gemini 或 xAI API 编写你自己的程序:sculptforge-cli --schema 会把每个工具输出为 JSON(示例见用户指南,Scripting > AI agents)。"},+ {"Your own code with the xAI API: sculptforge-cli --schema gives the tool definitions (examples in the user guide, Scripting > AI agents). API usage is billed by xAI.",+ "以 xAI API 编写你自己的程序:sculptforge-cli --schema 提供工具定义(示例见用户指南,Scripting > AI agents)。API 用量由 xAI 计费。"},+ {"xAI's coding agent (the grok command). Run once in a terminal; it signs in with your xAI account in the browser.",+ "xAI 的编程代理(grok 命令)。在终端运行一次;它会在浏览器中以你的 xAI 账号登录。"},+ // --- Batch 4 (Divide/Subdivide levels, saved views, mask darkness) ---+ {"Change the Mesh (no levels)", "更改网格(无层级)"},+ {"Ctrl+Z brings them back.", "Ctrl+Z 可撤销。"},+ {"Delete Higher Levels", "删除较高层级"},+ {"Delete Lower Levels", "删除较低层级"},+ {"Delete SDiv %d to %d and the detail sculpted on them?", "删除 SDiv %d 至 %d 及其上雕刻的细节?"},+ {"Delete SDiv 1 to %d? SDiv %d becomes the base mesh.", "删除 SDiv 1 至 %d?SDiv %d 成为基础网格。"},+ {"Delete view", "删除视图"},+ {"Destructive: four times the polygons as one plain mesh, with no lower levels to step back to. On a Part with subdivision levels it removes them (it asks first; Ctrl+Z brings them back). To keep levels, use Divide (keeps levels) instead.", "破坏性:多边形变为四倍,成为单一网格,没有可返回的较低层级。在有细分层级的部件上会移除层级(会先询问;Ctrl+Z 可撤销)。若要保留层级,请改用“细分(保留层级)”。"},+ {"Divide (keeps levels)", "细分(保留层级)"},+ {"Don't ask again", "不再询问"},+ {"Dynamic needs one plain mesh: Freeze keeps the level shown and removes the others (Ctrl+Z brings them back).", "动态需要单一网格:固定会保留当前显示的层级并移除其他层级(Ctrl+Z 可撤销)。"},+ {"Extract makes a shell from the masked area: mask it first (Ctrl+drag on the model).", "提取会从遮罩区域创建外壳:请先遮罩(在模型上 Ctrl+拖动)。"},+ {"Forget this saved view.", "忘记此已保存的视图。"},+ {"Freeze Levels + Dynamic", "固定层级 + 动态"},+ {"Freeze Levels and Turn On Dynamic", "固定层级并开启动态"},+ {"Go back to the view saved or restored last (View > Views).", "回到最后保存或还原的视图(视图 > 视图)。"},- {"Go to this saved view (小键盘 0 goes to the last one used).", "跳转到此已保存的视图(小键盘 0 跳转到最后使用的视图)。"},++ {"Go to this saved view (Numpad 0 goes to the last one used).", "跳转到此已保存的视图(小键盘 0 跳转到最后使用的视图)。"},+ {"How dark masked areas show (also in Preferences > Interface).", "遮罩区域显示的暗度(也可在偏好设置 > 界面中设置)。"},+ {"How dark masked areas show: 0 = not at all, 1 = nearly black. The default keeps the form readable under the mask.", "遮罩区域显示的暗度:0 = 完全不变暗,1 = 接近全黑。默认值让遮罩下的形体仍清晰可辨。"},+ {"Keep the subdivision level shown as a plain mesh, delete the other levels and turn Dynamic on (one undo step for the levels: Ctrl+Z brings them back).", "将当前显示的细分层级保留为单一网格,删除其他层级并开启动态(层级为一个撤销步骤:Ctrl+Z 可撤销)。"},+ {"Mask Darkness", "遮罩暗度"},+ {"Mask Darkness %.2f", "遮罩暗度 %.2f"},+ {"Mask darkness", "遮罩暗度"},+ {"Mask darkness %.2f", "遮罩暗度 %.2f"},+ {"Mask first (Ctrl+drag)", "请先遮罩(Ctrl+拖动)"},+ {"Micro Detail", "微细节"},+ {"Non-destructive: add a subdivision level: four times the polygons, and the lower levels are kept, so you can step down to shape big forms and back up to the detail. Quads stay quads (Catmull-Clark). Smt off divides without smoothing.", "非破坏性:添加一个细分层级:多边形变为四倍,并保留较低层级,可降到低层级塑造大形再回到细节。四边形维持四边形(Catmull-Clark)。关闭 Smt 则细分而不平滑。"},+ {"Remember this camera as a named view (View > Views; the name field names it). Saved with the project.", "将此相机记为命名视图(视图 > 视图;名称字段为其命名)。随项目保存。"},+ {"Restore View", "还原视图"},+ {"Save View", "保存视图"},+ {"Saved view", "已保存的视图"},+ {"Subdivide (removes levels)", "细分(移除层级)"},+ {"Subdivide and Remove Levels", "细分并移除层级"},+ {"This Part has %d subdivision levels (%s).", "此部件有 %d 个细分层级(%s)。"},+ {"This Part has subdivision levels, so strokes don't remesh it. Freeze Levels keeps the level shown as one plain mesh (Ctrl+Z brings the levels back).", "此部件有细分层级,因此笔触不会重新网格化。固定层级会将当前显示的层级保留为单一网格(Ctrl+Z 可撤销层级)。"},+ {"This removes your %d subdivision levels. Undo brings them back.", "这会移除你的 %d 个细分层级。撤销可恢复。"},+ {"Views", "视图"},+ {"name (optional)", "名称(可选)"},+};++} // namespace++std::span<const Entry> simplifiedChineseTable() { return {kSimplifiedChinese, std::size(kSimplifiedChinese)}; }++} // namespace sf::i18n