π Free CC0 mannequin pose reference library for AI image tools (Nano Banana, ChatGPT, ComfyUI, Midjourney) β 250+ poses Γ 5 angles in line art, names in ja/zh/en/ko
Python ai-artai-image-generationart-referencecc0comfyuicontrolnetdatasetdrawing-referencefigure-drawingline-artmannequinmidjourneymultilingualnano-bananapose-referencereference-imagesstable-diffusion
{
"views": [
"front",
"back",
"side",
"diag"
],
"items": {
"T001": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T002": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "consistency",
"reason": "body reads pale pink-red and the pickguard grey, versus glossy cherry red and black pickguard in the other panels",
"by": "fail_prop_r1_01.json"
}
},
"T003": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T004": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T005": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "view",
"reason": "nearly the same angle as the front panel (bell right, same key side); not a distinct 45 degree three-quarter view",
"by": "fail_prop_r1_01.json"
}
},
"T006": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "view",
"reason": "bell right and mouthpiece left, same orientation as the front panel, so it reads as the front again; the opposite side should have the bell on the left",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "view",
"reason": "bell left, valves right: looks like the true back, or a mirror of the front, not a profile; back and side seem swapped",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T007": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T008": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T009": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T010": {
"front": {
"status": "missing",
"reason": "a1 box octagonal not hexagonal; a2 hexagon fixed but strings faint; a3 hexagon + two strings + same-side pegs + plain membrane pass; bow hair still not clearly threaded between the two strings",
"by": "gen_prop_run01.json"
},
"back": {
"status": "missing",
"reason": "front failed skipped",
"by": "gen_prop_run01.json"
},
"side": {
"status": "missing",
"reason": "front failed skipped",
"by": "gen_prop_run01.json"
},
"diag": {
"status": "missing",
"reason": "front failed skipped",
"by": "gen_prop_run01.json"
}
},
"T011": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T012": {
"front": {
"status": "missing",
"reason": "never reached six finger holes: grounding counts a1=7 in row (plus one extra lower hole and an oversized protruding membrane blob) a2=9 (membrane flush fixed) a3=7 (membrane flush; bare stretch below ",
"by": "gen_prop_run01.json"
},
"back": {
"status": "missing",
"reason": "front failed skipped",
"by": "gen_prop_run01.json"
},
"side": {
"status": "missing",
"reason": "front failed skipped",
"by": "gen_prop_run01.json"
},
"diag": {
"status": "missing",
"reason": "front failed skipped",
"by": "gen_prop_run01.json"
}
},
"T013": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T014": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T015": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T016": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "view",
"reason": "looks identical to the front panel (same panels, same flower sprays in the same places), likely a copy of the front",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "consistency",
"reason": "centre silk panel is olive green and opaque, while the panels in the other views are dark and see-through",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T017": {
"front": {
"status": "content",
"reason": "the card's own red cord leaves the frame at the top edge, so a string holding the lantern is visible",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "content",
"reason": "the card's own red cord leaves the frame at the top edge, so a string holding the lantern is visible",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "content",
"reason": "the card's own red cord leaves the frame at the top edge, so a string holding the lantern is visible",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "content",
"reason": "the card's own red cord leaves the frame at the top edge, so a string holding the lantern is visible",
"by": "fail_prop_r1_01.json"
}
},
"T018": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T019": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T020": {
"front": {
"status": "content",
"reason": "a chain runs from the bow ring up past the top edge of the panel, a chain holding the watch, as well as the short loop chain",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "content",
"reason": "a chain runs from the bow ring up past the top edge of the panel, a chain holding the watch",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "content",
"reason": "a chain runs up past the top edge from the bow ring, and the hanging chain is also cut off at the bottom edge",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "content",
"reason": "a chain runs from the bow ring up past the top edge of the panel, a chain holding the watch",
"by": "fail_prop_r1_01.json"
}
},
"T021": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "view",
"reason": "shows the open objective end and a 3/4 angle from the front end, not the opposite long side; tripod and tube read as a front-right view",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "view",
"reason": "almost the same view as the front panel with only a slight turn",
"by": "fail_prop_r1_01.json"
}
},
"T022": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T023": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T024": {
"front": {
"status": "form",
"reason": "only two turned posts visible; the third post is not seen through the glass, as it is in the back view",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "form",
"reason": "lower bulb outline looks lopsided and wispy, so the glass is not symmetric and undistorted",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "form",
"reason": "lower bulb outline looks lopsided and wispy, so the glass is not symmetric and undistorted",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T025": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T026": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T027": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T028": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T029": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "missing",
"reason": "Stayed frontal with two separated cups on both attempts despite rewrite to overlapping single-cup profile; kept a2 (cleaner no logo mark); view is not a true 90-degree side profile",
"by": "gen_prop_run01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T030": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T031": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T032": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T033": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "missing",
"reason": "view-fail best attempt kept; a1 repeated the long side profile; a2 rewrite end-on gave a foreshortened end three-quarter showing width/thickness and near truck large but not a true 90-degree end view;",
"by": "gen_prop_run01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T034": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "consistency",
"reason": "the fin shows as a pale hollow U outline at the tail, not the solid brown fin seen in the side and diag panels",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T035": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
},
"T036": {
"front": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"back": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"side": {
"status": "pass",
"by": "fail_prop_r1_01.json"
},
"diag": {
"status": "pass",
"by": "fail_prop_r1_01.json"
}
}
}
}