Native iCloud apps for Windows and Linux, built in Rust. Notes, Reminders, Calendar, Contacts, Drive and Photos, offline and in sync with your iPhone.
Rust apple-notesapple-reminderscloudkitcrdtdesktop-appicloudicloud-calendaricloud-driveicloud-notesicloud-photosiphonelinuxlinux-desktoplocal-firstoffline-firstprivacyrusttauritauri-appwindows
README: the AppImage runs on Ubuntu 22.04 or later
Yashwanth Kamireddi5503e02e9a09
diff --git a/README.md b/README.mdindex 32cdb9d..1ba3161 100644--- a/README.md+++ b/README.md@@ -191,15 +191,15 @@ sudo zypper install --allow-vendor-change --from packman libavcodec62 libheif1 l</details><details>-<summary><b>The AppImage doesn't open on Ubuntu 24.04</b></summary>+<summary><b>The AppImage doesn't open on Ubuntu</b></summary>-Ubuntu 24.04 leaves out a small library AppImages usually use. Start it this way instead:+Ubuntu leaves out a small library AppImages usually use. Start it this way instead:```sh./Skykeep-linux-x86_64.AppImage --appimage-extract-and-run```-Or install the library once with `sudo apt install libfuse2t64`, and the AppImage opens normally.+Or install the library once with `sudo apt install libfuse2t64` (`libfuse2` on Ubuntu 22.04), and the AppImage opens normally.</details><a id="arch-linux"></a>@@ -225,7 +225,7 @@ Skykeep is coming to Flathub. The manifest is in [`packaging/flatpak`](packaging<details><summary><b>What your system needs</b></summary>-Windows 10 or 11. Or a Linux desktop with WebKitGTK 4.1 and a keyring (GNOME Keyring or KWallet), on Wayland or X11, with glibc 2.39 and libheif 1.17 or newer: Ubuntu 24.04, Linux Mint 22, Debian 13, Fedora 41, openSUSE Tumbleweed, or later. The `.deb` and `.rpm` check this when you install, so an older system finds out then rather than at launch.+Windows 10 or 11. Or a Linux desktop with WebKitGTK 4.1 and a keyring (GNOME Keyring or KWallet), on Wayland or X11, with glibc 2.39 and libheif 1.17 or newer: Ubuntu 24.04, Linux Mint 22, Debian 13, Fedora 41, openSUSE Tumbleweed, or later. The `.deb` and `.rpm` check this when you install, so an older system finds out then rather than at launch. The AppImage carries its own libheif and runs on Ubuntu 22.04 or later.</details>### Staying up to datediff --git a/packaging/README.md b/packaging/README.mdindex d795a03..15a3a3e 100644--- a/packaging/README.md+++ b/packaging/README.md@@ -64,18 +64,23 @@ loads it (`ldd` on the binary doesn't list it).### What the AppImage carries for photos and videos-The AppImage is built on Ubuntu 24.04 and carries that system's media stack, so HEIC photos-and H.264/HEVC videos work on a computer that has none of it:--- **GStreamer 1.24** (`bundle.linux.appimage.bundleMediaFramework`): Tauri's linuxdeploy+The AppImage is built in an Ubuntu 22.04 container (`.github/workflows/appimage.yml`): an+AppImage uses the glibc and libstdc++ of the computer it runs on, so it runs on the system it+was built on and newer ones, and 22.04 is the oldest Ubuntu LTS. The build fails if any ELF+file in it needs more than glibc 2.35, GLIBCXX 3.4.30 or CXXABI 1.3.13. It carries that+system's media stack, so HEIC photos and H.264/HEVC videos work on a computer that has none+of it:++- **GStreamer 1.20** (`bundle.linux.appimage.bundleMediaFramework`): Tauri's linuxdeployGStreamer plugin copies every plugin installed on the build machine, with the libraries theylink — the release builds install `gstreamer1.0-plugins-base` (playbin3, decodebin,videoconvert, appsink), `gstreamer1.0-plugins-good` (qtdemux for `.mov`/`.mp4`, videoflip)- and `gstreamer1.0-libav` (avdec_h264, avdec_h265 — FFmpeg's libavcodec 6.1 from Ubuntu's+ and `gstreamer1.0-libav` (avdec_h264, avdec_h265 — FFmpeg's libavcodec 58 from Ubuntu'suniverse), and its AppRun hook points GStreamer at them. Not `-bad` or `-ugly`, and noopenh264.-- **libheif 1.17 with libde265's HEVC decoder** (`libheif-plugin-libde265`, listed in- `bundle.linux.appimage.files` with `libde265.so.0`): libheif looks for its decoder plugins+- **libheif 1.19 with libde265's HEVC decoder**, built from their release tarballs (22.04's+ libheif is 1.12, older than the 1.17 the app needs) into Ubuntu's multiarch paths, and+ listed in `bundle.linux.appimage.files` (the plugin and `libde265.so.0`): libheif looks for its decoder pluginsin the directory it was built with, which on another system is that system's (empty on aclean Debian or Fedora). At start-up, before libheif is used, Skykeep sets`LIBHEIF_PLUGIN_PATH` to the AppImage's own `usr/lib/libheif/plugins` — only when `APPDIR`@@ -91,11 +96,11 @@ Arch package carry none of this — they use the system's own packages (Fedora ausers add RPM Fusion or Packman for HEVC, as the README says).The files map uses Ubuntu's multiarch paths, so `npx tauri build --bundles appimage` is meant-for an Ubuntu/Debian machine with `libheif-plugin-libde265` installed, as the release builds-are; elsewhere build the `.rpm` or the Arch package.+for an Ubuntu/Debian machine with `libheif-plugin-libde265` (or the one appimage.yml builds)+installed; elsewhere build the `.rpm` or the Arch package.-`linux-compat.yml` (Actions → Linux compatibility) builds the packages on Ubuntu 24.04,-Debian 13, Fedora 42, openSUSE Tumbleweed and Arch from these instructions and installs each in a+`linux-compat.yml` (Actions → Linux compatibility) builds the packages on Ubuntu 24.04 (the+AppImage on 22.04, and starts it there with no network), Debian 13, Fedora 42, openSUSE Tumbleweed and Arch from these instructions and installs each in aclean container of its distribution; `linux-compat/check.sh` is what it runs there.## Flatpak@@ -105,11 +110,13 @@ and what's left before Flathub.## What Skykeep needs to run-The floor is glibc 2.39 (the bundles are built on Ubuntu 24.04) and libheif 1.17+For the `.deb`, `.rpm` and Arch package, the floor is glibc 2.39 (they are built on Ubuntu+24.04) and libheif 1.17(`libheif-rs` with `v1_17`): Ubuntu 24.04, Mint 22, Debian 13, Fedora 41, Tumbleweed, or later.The `.deb` and `.rpm` declare both as versioned dependencies in `src-tauri/tauri.conf.json`, soan older system is refused by its package manager with a clear message instead of a loader-error at launch. The AppImage needs FUSE 2 to mount itself; without `libfuse2` it runs with+error at launch. The AppImage carries its own libheif and needs glibc 2.35: Ubuntu 22.04 or+later. It needs FUSE 2 to mount itself; without `libfuse2` it runs with`--appimage-extract-and-run`.- `webkit2gtk-4.1` for the window and `libsecret` for the keyring. Without a keyring the app