Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

7.0 KB
Raw Blame
//! Timings for large sketches (run with `cargo test -p solidcraft-engine --release sketch_perf -- --ignored --nocapture`;
//! numbers are recorded in docs/perf.md).

use std::time::Instant;

use serde_json::json;

use crate::Session;

fn ms(t: Instant) -> f64 {
    t.elapsed().as_secs_f64() * 1000.0
}

/// A sketch of `n` constrained rectangles (4n lines, each dimensioned) plus `n` circles inside
/// them, built straight into the document.
fn big(n: usize) -> Session {
    let mut s = Session::default();
    s.execute("sketch.create", &json!({"plane": "XY"})).unwrap();
    let id = s.active_sketch.unwrap();
    let mut doc = (*s.doc).clone();
    let sk = doc.sketch_mut(id).unwrap();
    use solidcore_record::Vec2;
    use solidcraft_sketch::ConstraintKind::*;
    let side = (n as f64).sqrt().ceil() as usize;
    for k in 0..n {
        let (x, y) = ((k % side) as f64 * 30.0, (k / side) as f64 * 30.0);
        let p: Vec<usize> = [(0.0, 0.0), (20.0, 0.3), (20.2, 15.0), (-0.1, 15.1)]
            .iter()
            .map(|(dx, dy)| sk.add_point(Vec2::new(x + dx, y + dy), None).unwrap())
            .collect();
        let l: Vec<usize> = (0..4).map(|i| sk.add_line_pts(p[i], p[(i + 1) % 4], None).unwrap()).collect();
        sk.add_constraint(Horizontal { l: l[0] }, None).unwrap();
        sk.add_constraint(Horizontal { l: l[2] }, None).unwrap();
        sk.add_constraint(Vertical { l: l[1] }, None).unwrap();
        sk.add_constraint(Vertical { l: l[3] }, None).unwrap();
        sk.add_constraint(Length { l: l[0], value: 20.0 }, None).unwrap();
        sk.add_constraint(Length { l: l[1], value: 15.0 }, None).unwrap();
        sk.add_circle(Vec2::new(x + 10.0, y + 7.5), 3.0, None, None).unwrap();
    }
    *s.doc_mut() = doc;
    s.refresh();
    s
}

#[test]
#[ignore]
fn sketch_perf() {
    for n in [250usize, 500, 1000] {
        let t = Instant::now();
        let mut s = big(n);
        let build = ms(t);
        let id = s.active_sketch.unwrap();
        let sk = s.doc.sketch(id).unwrap().clone();
        let entities = sk.curves.len() + sk.points.len();
        let t = Instant::now();
        let mut k = sk.clone();
        let rep = solidcraft_sketch::solve(&mut k);
        let solve = ms(t);
        let t = Instant::now();
        let prof = solidcraft_sketch::find_profiles(&k);
        let profiles = ms(t);
        let ss = s.model.state().sketch(id).unwrap().clone();
        let t = Instant::now();
        let lines = crate::view::sketch_lines(&ss.sketch, &ss.plane, true, &ss.report.curve_determined);
        let draw = ms(t);
        let t = Instant::now();
        s.execute("sketch.snap", &json!({"at": [10.0, 0.2], "from": [0, 0], "radius": 1})).unwrap();
        let snap = ms(t);
        let t = Instant::now();
        s.execute("sketch.line", &json!({"points": [[-50, -50], [-40, -45]]})).unwrap();
        let add = ms(t);
        let t = Instant::now();
        s.execute("sketch.move_point", &json!({"point": "p1", "to": [1, 1]})).unwrap();
        let drag = ms(t);
        eprintln!(
            "PERF n={n} curves={} points={} entities={entities} constraints={} dof={} profiles={}: build {build:.0} ms, solve {solve:.0} ms, profiles {profiles:.0} ms, draw lists {draw:.1} ms ({} polylines), snap {snap:.1} ms, add a line {add:.0} ms, drag a point {drag:.0} ms",
            sk.curves.len(),
            sk.points.len(),
            sk.constraints.len(),
            rep.dof,
            prof.len(),
            lines.len()
        );
    }
}

/// Fill sketch `id` with `n` constrained rectangles, each with a circle inside.
fn fill(doc: &mut solidcraft_doc::Document, id: u64, n: usize, x0: f64) {
    use solidcore_record::Vec2;
    use solidcraft_sketch::ConstraintKind::*;
    let Ok(sk) = doc.sketch_mut(id) else { return };
    for k in 0..n {
        let (x, y) = (x0 + k as f64 * 30.0, 0.0);
        let p: Vec<usize> = [(0.0, 0.0), (20.0, 0.3), (20.2, 15.0), (-0.1, 15.1)]
            .iter()
            .map(|(dx, dy)| sk.add_point(Vec2::new(x + dx, y + dy), None).unwrap())
            .collect();
        let l: Vec<usize> = (0..4).map(|i| sk.add_line_pts(p[i], p[(i + 1) % 4], None).unwrap()).collect();
        sk.add_constraint(Horizontal { l: l[0] }, None).unwrap();
        sk.add_constraint(Horizontal { l: l[2] }, None).unwrap();
        sk.add_constraint(Vertical { l: l[1] }, None).unwrap();
        sk.add_constraint(Vertical { l: l[3] }, None).unwrap();
        sk.add_constraint(Length { l: l[0], value: 20.0 }, None).unwrap();
        sk.add_constraint(Length { l: l[1], value: 15.0 }, None).unwrap();
        sk.add_circle(Vec2::new(x + 10.0, y + 7.5), 3.0, None, None).unwrap();
    }
}

/// A large design (`sketches` sketches of `rects` rectangles, `params` parameters), the first
/// sketch (`first` rectangles) open for editing; per live drag frame: execute time and the
/// time of one copy of the document.
#[test]
#[ignore]
fn sketch_drag_frame_perf() {
    let cases: [(usize, usize, usize, usize); 3] = [(50, 10, 200, 2), (200, 20, 500, 2), (200, 20, 500, 50)];
    for (sketches, rects, params, first) in cases {
        let mut s = Session::default();
        for i in 0..params {
            s.execute("parameters.add", &json!({"name": format!("p{i}"), "expression": format!("{i} mm")})).unwrap();
        }
        for k in 0..sketches {
            s.execute("sketch.create", &json!({"plane": "XY"})).unwrap();
            let id = s.active_sketch.unwrap();
            let mut doc = (*s.doc).clone();
            fill(&mut doc, id, if k == 0 { first } else { rects }, 0.0);
            *s.doc_mut() = doc;
            s.execute("sketch.finish", &json!({})).unwrap();
        }
        s.execute("sketch.edit", &json!({"sketch": "Sketch1"})).unwrap();
        let curves: usize = s.doc.features.iter().filter_map(|f| s.doc.sketch(f.id).ok()).map(|k| k.curves.len()).sum();
        let json_len = serde_json::to_string(&*s.doc).map(|j| j.len()).unwrap_or(0);
        let frames = 60;
        let mut frame_ms = Vec::new();
        for f in 0..frames {
            let to = [1.0 + f as f64 * 0.05, 1.0 + f as f64 * 0.03];
            let t = Instant::now();
            s.execute("sketch.drag", &json!({"entity": "p1", "from": [0, 0], "to": to, "live": true})).unwrap();
            frame_ms.push(ms(t));
        }
        s.execute("sketch.drag_end", &json!({})).ok();
        let digest = {
            use std::hash::{Hash, Hasher};
            let mut h = std::collections::hash_map::DefaultHasher::new();
            serde_json::to_string(&*s.doc).unwrap_or_default().hash(&mut h);
            format!("{:016x}", h.finish())
        };
        frame_ms.sort_by(f64::total_cmp);
        let t = Instant::now();
        for _ in 0..frames {
            std::hint::black_box((*s.doc).clone());
        }
        let copy = ms(t) / frames as f64;
        let frame = frame_ms[frames / 2];
        eprintln!(
            "DRAGPERF sketches={sketches} rects={rects} first={first} params={params} features={} curves={curves} json={json_len}B: frame median {frame:.3} ms, one copy {copy:.3} ms ({:.1} %), design {digest}",
            s.doc.features.len(),
            100.0 * copy / frame
        );
    }
}