SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
//! CPU rasterizer for headless snapshots: z-buffered, smooth-shaded triangles and depth-tested
//! lines, rendered at 2× and downsampled for anti-aliasing.
use solidcore_record::Vec3;
use solidcraft_geom::prelude::*;
use crate::Camera;
use crate::scene::{Rgb, SECTION_CAP, Scene, png};
/// RGBA pixels plus depth.
pub struct Canvas {
pub w: usize,
pub h: usize,
pub rgba: Vec<u8>,
depth: Vec<f32>,
}
const SS: usize = 2;
const MAX_DIM: usize = 8192;
/// The rounding the lines' depth test allows for, relative to the depth (a few steps of the
/// `f32` depth buffer).
const DEPTH_EPS: f64 = 4.0 * f32::EPSILON as f64;
impl Canvas {
fn new(w: usize, h: usize) -> Canvas {
Canvas { w, h, rgba: vec![255; w * h * 4], depth: vec![f32::INFINITY; w * h] }
}
fn put(&mut self, x: usize, y: usize, c: [f64; 3], a: f64) {
let i = (y * self.w + x) * 4;
if let Some(px) = self.rgba.get_mut(i..i + 3) {
for (k, v) in px.iter_mut().enumerate() {
let old = *v as f64 / 255.0;
*v = ((old * (1.0 - a) + c[k] * a).clamp(0.0, 1.0) * 255.0).round() as u8;
}
}
}
}
/// The order a scene's bodies are drawn in. Solid bodies come first and own the depth buffer;
/// the see-through ones are then blended over them, far sides before near sides, so a
/// translucent body reads like glass and whatever lies inside it shows through. This is the
/// order the GPU viewport draws its own glass in.
///
/// Splitting each see-through body by facing orders its own two layers, which is what a single
/// translucent body needs. Two see-through bodies that overlap on screen blend in the order the
/// scene lists them, where the GPU sorts its glass triangles back to front: the difference shows
/// only where translucent bodies lie in front of each other, which the CPU rasterizer (a
/// fallback for machines without a GPU) does not try to match.
#[derive(Clone, Copy, PartialEq, Eq)]
enum Pass {
Solid,
GlassFar,
GlassNear,
}
impl Pass {
/// Does this pass draw the see-through bodies ([`SceneMesh::glass`])?
fn glass(self) -> bool {
self != Pass::Solid
}
/// Does it draw a triangle whose facing is `inside` (away from the eye)? A solid body draws
/// both: its back faces show only where a section opens it.
fn takes(self, inside: bool) -> bool {
match self {
Pass::Solid => true,
Pass::GlassFar => inside,
Pass::GlassNear => !inside,
}
}
}
pub(crate) fn shade(n: Vec3, view_dir: Vec3, base: [f64; 3]) -> [f64; 3] {
let n = if n.dot(view_dir) < 0.0 { -n } else { n };
let key = (view_dir * 0.8 + Vec3::new(-0.3, 0.2, 0.6)).normalized().unwrap_or(view_dir);
let diff = n.dot(key).max(0.0);
let fill = n.dot(view_dir).max(0.0);
let h = (key + view_dir).normalized().unwrap_or(view_dir);
let spec = n.dot(h).max(0.0).powi(40) * 0.25;
let k = 0.42 + 0.38 * diff + 0.25 * fill;
[(base[0] * k + spec).min(1.0), (base[1] * k + spec).min(1.0), (base[2] * k + spec).min(1.0)]
}
/// Render a scene with the camera into an RGBA canvas of `w × h` pixels.
pub fn render(scene: &Scene, cam: &Camera, w: usize, h: usize) -> Canvas {
let (w, h) = (w.clamp(1, MAX_DIM), h.clamp(1, MAX_DIM));
let (sw, sh) = (w * SS, h * SS);
let mut c = Canvas::new(sw, sh);
let (top, bot) = scene.background.unwrap_or((Rgb(236, 240, 245), Rgb(205, 212, 222)));
for y in 0..sh {
let t = y as f64 / sh.max(1) as f64;
let (a, b) = (top.f(), bot.f());
let col = [a[0] + (b[0] - a[0]) * t, a[1] + (b[1] - a[1]) * t, a[2] + (b[2] - a[2]) * t];
for x in 0..sw {
c.put(x, y, col, 1.0);
}
}
let vp = cam.view_proj(sw as f64 / sh as f64, scene.radius.max(1.0));
let project = |p: Vec3| -> Option<[f64; 3]> {
let q = vp.apply(p);
if q[3] <= 1e-9 {
return None;
}
Some([(q[0] / q[3] + 1.0) * 0.5 * sw as f64, (1.0 - q[1] / q[3]) * 0.5 * sh as f64, q[2] / q[3]])
};
let view_dir = cam.back();
// Where the section cap is the visible surface: the depth of the section plane on that
// pixel's view ray. Written into the depth buffer once the solids are drawn, so the cut face
// hides edges inside the body (holes, far corners) instead of showing them like a pane of
// glass, while holes through the cut stay open (as the viewport does with its stencil).
let cap_z = scene.clip.and_then(|(n, d)| cap_plane(cam, n, d, scene.radius.max(1.0), &project));
let mut cap_depth = if cap_z.is_some() { vec![f32::INFINITY; sw * sh] } else { Vec::new() };
// The screen depth slope (per canvas pixel) of the surface each pixel shows, for the lines'
// depth test.
let mut slope = vec![0f32; sw * sh];
let cap_tint = scene.cap.unwrap_or(SECTION_CAP).f();
for pass in [Pass::Solid, Pass::GlassFar, Pass::GlassNear] {
for sm in scene.meshes.iter().filter(|m| m.glass() == pass.glass()) {
let alpha = sm.alpha();
let m = &sm.mesh;
let body = sm.color.f();
// The hatch of its cut face: its own by part, else the cap's at 45 degrees.
let (tint, turned) = match scene.part_hatch {
Some(colours) => (colours.get(sm.hatch.colour()).map_or(cap_tint, |c| c.f()), sm.hatch.turned()),
None => (cap_tint, false),
};
let pts: Vec<Option<[f64; 3]>> = m.positions.iter().map(|p| project(*p)).collect();
// 1 / clip w per vertex, for perspective-correct interpolation of world positions (so
// the section cuts along the plane, not a curve, in perspective views).
let inv_w: Vec<f64> = m.positions.iter().map(|p| 1.0 / vp.apply(*p)[3].max(1e-9)).collect();
for (ti, t) in m.triangles.iter().enumerate() {
let face = m.tri_face.get(ti).copied();
let base = sm.face_colors.iter().find(|(f, _)| Some(*f) == face).map_or(body, |(_, c)| c.f());
let wp = t.map(|k| m.positions.get(k as usize).copied().unwrap_or_default());
// Seen from inside: where a section cuts a solid body open, and the far side of
// a see-through one (drawn in the pass before its near side).
let to_eye = if cam.fov > 0.0 { cam.eye() - wp[0] } else { view_dir };
let inside = (wp[1] - wp[0]).cross(wp[2] - wp[0]).dot(to_eye) < 0.0;
if !pass.takes(inside) {
continue;
}
let iw = t.map(|k| inv_w.get(k as usize).copied().unwrap_or(1.0));
let (Some(Some(a)), Some(Some(b)), Some(Some(cc))) = (pts.get(t[0] as usize), pts.get(t[1] as usize), pts.get(t[2] as usize)) else {
continue;
};
let ns: Vec<Vec3> = t.iter().map(|k| m.normals.get(*k as usize).copied().unwrap_or(Vec3::Z)).collect();
// A curved surface (its normals turn across the triangle) gets a silhouette line
// where it turns away from the eye.
let curved = ns.iter().any(|n| n.dist(ns[0]) > 1e-6);
let (x0, x1) = (a[0].min(b[0]).min(cc[0]).floor().max(0.0), a[0].max(b[0]).max(cc[0]).ceil().min(sw as f64 - 1.0));
let (y0, y1) = (a[1].min(b[1]).min(cc[1]).floor().max(0.0), a[1].max(b[1]).max(cc[1]).ceil().min(sh as f64 - 1.0));
if !(x0 <= x1 && y0 <= y1) {
continue;
}
let area = (b[0] - a[0]) * (cc[1] - a[1]) - (b[1] - a[1]) * (cc[0] - a[0]);
if area.abs() < 1e-12 {
continue;
}
let gx = ((b[2] - a[2]) * (cc[1] - a[1]) - (cc[2] - a[2]) * (b[1] - a[1])) / area;
let gy = ((cc[2] - a[2]) * (b[0] - a[0]) - (b[2] - a[2]) * (cc[0] - a[0])) / area;
let tri_slope = gx.hypot(gy) as f32;
for y in y0 as usize..=y1 as usize {
for x in x0 as usize..=x1 as usize {
let (px, py) = (x as f64 + 0.5, y as f64 + 0.5);
let w0 = ((b[0] - px) * (cc[1] - py) - (b[1] - py) * (cc[0] - px)) / area;
let w1 = ((cc[0] - px) * (a[1] - py) - (cc[1] - py) * (a[0] - px)) / area;
let w2 = 1.0 - w0 - w1;
if w0 < -1e-9 || w1 < -1e-9 || w2 < -1e-9 {
continue;
}
let (q0, q1, q2) = (w0 * iw[0], w1 * iw[1], w2 * iw[2]);
let qs = q0 + q1 + q2;
let (p0, p1, p2) = if qs > 1e-12 { (q0 / qs, q1 / qs, q2 / qs) } else { (w0, w1, w2) };
if let Some((cn, cd)) = scene.clip
&& cn.dot(wp[0] * p0 + wp[1] * p1 + wp[2] * p2) > cd
{
continue;
}
let mut z = (w0 * a[2] + w1 * b[2] + w2 * cc[2]) as f32;
// The cut wins a tie: where a body stands on another, its bottom seen
// through the cut and the other's top are the same plane, a rounding
// apart (the viewport settles it without depth, by counting the faces
// behind the cut in the stencil: `Cut::count`).
if inside && scene.clip.is_some() && !pass.glass() {
z -= z.abs() * DEPTH_EPS as f32;
}
let i = y * sw + x;
if c.depth.get(i).is_some_and(|d| z < *d) {
// A see-through body is blended over what is already drawn and
// leaves the depth buffer alone, so bodies inside it stay visible
// and the lines' depth test still answers for the solids.
if !pass.glass() {
if let Some(d) = c.depth.get_mut(i) {
*d = z;
}
if let Some(s) = slope.get_mut(i) {
*s = tri_slope;
}
}
let n = (ns[0] * p0 + ns[1] * p1 + ns[2] * p2).normalized().unwrap_or(Vec3::Z);
// A see-through body has no cut face: the interior already shows.
let cut = !pass.glass() && scene.clip.is_some() && inside;
if let Some(d) = cap_depth.get_mut(i).filter(|_| !pass.glass()) {
*d = match cap_z {
Some([a, b, k]) if cut => ((a * px + b * py + k) as f32).min(z),
_ => f32::INFINITY,
};
}
if cut {
// The cut: the body's colour tinted toward its hatch colour, hatched
// at 45 or 135 degrees (as the viewport draws it); a plain cap is
// the body's own colour.
if scene.plain_cap {
c.put(x, y, base, 1.0);
continue;
}
let tinted: [f64; 3] = std::array::from_fn(|k| base[k] + (tint[k] - base[k]) * 0.35);
let along = if turned { x as i64 - y as i64 } else { (x + y) as i64 };
let k = if along.div_euclid(SS as i64).rem_euclid(9) < 2 { 0.6 } else { 1.0 };
c.put(x, y, tinted.map(|v| v * k), 1.0);
continue;
}
let mut col = shade(n, view_dir, base);
let ndv = n.dot(view_dir).abs();
if curved && ndv < 0.14 {
let a = 1.0 - ndv / 0.14;
for (k, e) in col.iter_mut().zip([0.07, 0.08, 0.10]) {
*k = *k * (1.0 - a) + e * a;
}
}
c.put(x, y, col, alpha);
}
}
}
}
}
}
let cap_slope = cap_z.map_or(0.0, |[a, b, _]| a.hypot(b) as f32);
for ((d, s), cz) in c.depth.iter_mut().zip(slope.iter_mut()).zip(&cap_depth) {
if cz.is_finite() {
*d = *cz;
*s = s.max(cap_slope);
}
}
for l in scene.grid.iter().chain(&scene.lines) {
let col = l.color.f();
// A line that is not opaque is blended with what is under it (the grid fading out).
let alpha = f64::from(l.alpha).clamp(0.0, 1.0);
let half = (l.width * SS as f64 * 0.5).max(0.5);
for seg in l.points.windows(2) {
let (Some(&p), Some(&q)) = (seg.first(), seg.get(1)) else { continue };
// The section cuts the segment in 3D (screen space is not linear in depth in
// perspective views).
let Some((p, q)) = clip_segment(p, q, scene.clip) else { continue };
let (Some(a), Some(b)) = (project(p), project(q)) else { continue };
let len = ((b[0] - a[0]).powi(2) + (b[1] - a[1]).powi(2)).sqrt();
let steps = (len.ceil() as usize).clamp(1, 20_000);
for k in 0..=steps {
let t = k as f64 / steps as f64;
let (x, y, z) = (a[0] + (b[0] - a[0]) * t, a[1] + (b[1] - a[1]) * t, a[2] + (b[2] - a[2]) * t);
let r = half.ceil() as i64;
for dy in -r..=r {
for dx in -r..=r {
let (ix, iy) = (x.floor() as i64 + dx, y.floor() as i64 + dy);
if ix < 0 || iy < 0 || ix >= sw as i64 || iy >= sh as i64 {
continue;
}
let d = ((ix as f64 + 0.5 - x).powi(2) + (iy as f64 + 0.5 - y).powi(2)).sqrt();
let cov = (half + 0.5 - d).clamp(0.0, 1.0);
if cov <= 0.0 {
continue;
}
let i = iy as usize * sw + ix as usize;
// A line on a face lies at the face's depth, but the pixel holds the
// face's depth at its centre, `d` away: allow what the face's slope
// spans over that distance, and the rounding. (A fixed allowance in
// screen depth is a share of the scene's depth range, a millimetre or
// more on a large design: close views showed the far side of thin
// sheet, and parts just behind it, through it.)
let visible = l.on_top
|| c.depth.get(i).zip(slope.get(i)).is_some_and(|(dd, s)| z <= f64::from(*dd) + f64::from(*s) * d + z.abs() * DEPTH_EPS);
if visible {
c.put(ix as usize, iy as usize, col, cov * alpha);
}
}
}
}
}
}
// Downsample.
let mut out = Canvas::new(w, h);
for y in 0..h {
for x in 0..w {
let mut acc = [0u32; 4];
for sy in 0..SS {
for sx in 0..SS {
let i = ((y * SS + sy) * sw + x * SS + sx) * 4;
for (k, a) in acc.iter_mut().enumerate() {
*a += c.rgba.get(i + k).copied().unwrap_or(0) as u32;
}
}
}
let o = (y * w + x) * 4;
for (k, a) in acc.iter().enumerate() {
if let Some(v) = out.rgba.get_mut(o + k) {
*v = (*a / (SS * SS) as u32) as u8;
}
}
}
}
out
}
/// The part of segment `p`–`q` the section keeps (where normal·x <= d).
fn clip_segment(p: Vec3, q: Vec3, clip: Option<(Vec3, f64)>) -> Option<(Vec3, Vec3)> {
let Some((n, d)) = clip else { return Some((p, q)) };
let (dp, dq) = (n.dot(p) - d - 1e-6, n.dot(q) - d - 1e-6);
match (dp > 0.0, dq > 0.0) {
(true, true) => None,
(false, false) => Some((p, q)),
(true, false) => Some((p + (q - p) * (dp / (dp - dq)), q)),
(false, true) => Some((p, p + (q - p) * (dp / (dp - dq)))),
}
}
/// Screen depth of the section plane `n·p = d` as `z = a·x + b·y + k` in canvas pixels (a plane
/// stays a plane under projection), set a hair behind the plane so the cut's own outline stays
/// drawn. None when the plane is seen edge-on or lies behind the eye.
fn cap_plane(cam: &Camera, n: Vec3, d: f64, radius: f64, project: &dyn Fn(Vec3) -> Option<[f64; 3]>) -> Option<[f64; 3]> {
let margin = 1e-3 * (1.0 + radius);
let o = cam.target - n * (n.dot(cam.target) - d - margin);
let (u, v) = (n.any_perp(), n.cross(n.any_perp()));
let s = radius * 0.1;
let (p0, p1, p2) = (project(o)?, project(o + u * s)?, project(o + v * s)?);
let (ax, ay, az) = (p1[0] - p0[0], p1[1] - p0[1], p1[2] - p0[2]);
let (bx, by, bz) = (p2[0] - p0[0], p2[1] - p0[1], p2[2] - p0[2]);
let det = ax * by - ay * bx;
if det.abs() < 1e-9 {
return None;
}
let a = (az * by - ay * bz) / det;
let b = (ax * bz - az * bx) / det;
let k = p0[2] - a * p0[0] - b * p0[1];
[a, b, k].iter().all(|x| x.is_finite()).then_some([a, b, k])
}
/// Render to PNG bytes.
pub fn render_png(scene: &Scene, cam: &Camera, w: usize, h: usize) -> Option<Vec<u8>> {
let c = render(scene, cam, w, h);
png(c.w, c.h, c.rgba)
}
/// Render on a transparent background: the scene drawn over black and over white, and the
/// alpha recovered from the difference (exact for the anti-aliased edges).
pub fn render_transparent(scene: &mut Scene, cam: &Camera, w: usize, h: usize) -> Canvas {
let keep = scene.background;
scene.background = Some((Rgb(0, 0, 0), Rgb(0, 0, 0)));
let black = render(scene, cam, w, h);
scene.background = Some((Rgb(255, 255, 255), Rgb(255, 255, 255)));
let mut out = render(scene, cam, w, h);
scene.background = keep;
for (o, b) in out.rgba.as_chunks_mut::<4>().0.iter_mut().zip(black.rgba.as_chunks::<4>().0) {
// white - black = 255 (1 - alpha) in every channel; average them.
let d: u32 = (0..3).map(|k| u32::from(o[k].saturating_sub(b[k]))).sum();
let a = 255.0 - d as f64 / 3.0;
for k in 0..3 {
o[k] = if a > 0.5 { (f64::from(b[k]) * 255.0 / a).round().clamp(0.0, 255.0) as u8 } else { 0 };
}
o[3] = a.round().clamp(0.0, 255.0) as u8;
}
out
}
#[cfg(test)]
mod tests {
use super::*;
use crate::StandardView;
use crate::scene::{SceneLine, SceneMesh};
use solidcraft_geom::Mesh;
use std::sync::Arc;
/// Lines are cut by the section in 3D: the kept piece ends on the plane.
#[test]
fn section_clips_lines_at_the_plane() {
let clip = Some((Vec3::X, 2.0));
let (p, q) = clip_segment(Vec3::ZERO, Vec3::new(10.0, 4.0, 0.0), clip).unwrap();
assert_eq!(p, Vec3::ZERO);
assert!((q.x - 2.0).abs() < 1e-5 && (q.y - 0.8).abs() < 1e-5, "{q:?}");
assert!(clip_segment(Vec3::new(3.0, 0.0, 0.0), Vec3::new(5.0, 0.0, 0.0), clip).is_none());
assert!(clip_segment(Vec3::new(3.0, 0.0, 0.0), Vec3::new(5.0, 0.0, 0.0), None).is_some());
}
#[test]
fn renders_a_triangle() {
let mesh = Mesh {
positions: vec![Vec3::new(-10.0, 0.0, -10.0), Vec3::new(10.0, 0.0, -10.0), Vec3::new(0.0, 0.0, 10.0)],
normals: vec![Vec3::new(0.0, -1.0, 0.0); 3],
triangles: vec![[0, 1, 2]],
tri_face: vec![0],
edges: vec![],
display_only_edges: false,
seams: vec![],
smooth_edges: vec![],
sharp_edges: vec![],
edge_faces: vec![],
};
let scene = Scene {
meshes: vec![SceneMesh::solid(Arc::new(mesh), Rgb(200, 30, 30))],
lines: vec![],
background: None,
radius: 20.0,
clip: None,
cap: None,
..Default::default()
};
let mut cam = Camera { distance: 50.0, ..Default::default() };
cam.set_view(StandardView::Front);
let c = render(&scene, &cam, 64, 64);
let i = (32 * 64 + 32) * 4;
assert!(c.rgba[i] > c.rgba[i + 1] + 50, "centre pixel is red: {:?}", &c.rgba[i..i + 4]);
assert!(render_png(&scene, &cam, 16, 16).unwrap().starts_with(&[0x89, b'P', b'N', b'G']));
// Hostile sizes are clamped.
assert_eq!(render(&scene, &cam, 0, usize::MAX).w, 1);
}
/// A square panel facing the front camera (which looks along +Y), 20 × 20 about the origin
/// at `y`: nearer the eye the smaller `y` is.
fn panel(y: f64) -> Mesh {
let c = [(-10.0, -10.0), (10.0, -10.0), (10.0, 10.0), (-10.0, 10.0)].map(|(x, z)| Vec3::new(x, y, z));
Mesh {
positions: c.to_vec(),
normals: vec![Vec3::new(0.0, -1.0, 0.0); 4],
triangles: vec![[0, 1, 2], [0, 2, 3]],
tri_face: vec![0, 0],
..Default::default()
}
}
/// A front panel over a back one, with a line between them, seen from the front.
fn two_panels(front_opacity: f32) -> (Scene, Camera) {
let glass = SceneMesh {
mesh: Arc::new(panel(-5.0)),
color: Rgb(255, 0, 0),
face_colors: Vec::new(),
opacity: front_opacity,
closed: true,
hatch: Default::default(),
};
let scene = Scene {
meshes: vec![SceneMesh::solid(Arc::new(panel(5.0)), Rgb(0, 255, 0)), glass],
lines: vec![SceneLine {
points: vec![Vec3::new(-8.0, 2.0, 0.0), Vec3::new(8.0, 2.0, 0.0)],
color: Rgb(0, 0, 255),
alpha: 1.0,
width: 1.4,
on_top: false,
}],
radius: 40.0,
..Default::default()
};
let mut cam = Camera { distance: 60.0, ..Default::default() };
cam.set_view(StandardView::Front);
(scene, cam)
}
/// A body the design draws see-through lets what is behind it show: the colour of the body
/// behind it comes through, and so does a line between the two, which a solid body in front
/// hides. This is what makes a picture of a cut's tool inside a translucent target readable.
#[test]
fn a_see_through_body_shows_what_is_inside_it() {
let middle = |opacity: f32| {
let (scene, cam) = two_panels(opacity);
let c = render(&scene, &cam, 64, 64);
// Inside both panels and clear of the line across the middle, so this pixel is
// the two panels alone.
let i = (24 * 64 + 24) * 4;
[c.rgba[i], c.rgba[i + 1], c.rgba[i + 2]]
};
let behind = |opacity: f32| {
let (scene, cam) = two_panels(opacity);
render(&scene, &cam, 64, 64).rgba.chunks(4).filter(|p| p[2] > 150 && p[0] < 120 && p[1] < 120).count()
};
let solid = middle(1.0);
assert!(solid[0] > 150 && solid[1] < 60, "a solid panel hides the one behind it: {solid:?}");
assert_eq!(behind(1.0), 0, "a solid panel hides the line behind it");
let glass = middle(0.35);
assert!(glass[1] > solid[1] + 60, "the panel behind shows through: {glass:?} vs {solid:?}");
assert!(glass[0] < solid[0], "the see-through panel itself is dimmer: {glass:?} vs {solid:?}");
assert!(behind(0.35) > 20, "the line between the panels shows through the see-through one");
// Opacity 0 still leaves a trace of the body rather than an invisible one, and the
// picture changes all the way down.
let faint = middle(0.0);
assert!(faint[0] > 0 && faint[0] < glass[0], "opacity 0 is a trace, not nothing and not glass: {faint:?} vs {glass:?}");
}
/// A sheet facing the front camera, turned back by `tilt` about X: the plane y = z·tan(tilt)
/// over x in ±15, z in ±`h`.
fn sheet(tilt: f64, h: f64) -> Mesh {
let t = tilt.tan();
let c = [(-15.0, -h), (15.0, -h), (15.0, h), (-15.0, h)].map(|(x, z)| Vec3::new(x, z * t, z));
Mesh {
positions: c.to_vec(),
normals: vec![Vec3::new(0.0, -tilt.cos(), tilt.sin()); 4],
triangles: vec![[0, 1, 2], [0, 2, 3]],
tri_face: vec![0, 0],
..Default::default()
}
}
/// A close front view: 40 mm high on 64 px (128 canvas px, 0.3125 mm each), of a design of
/// radius `radius`.
fn close_view(mesh: Mesh, lines: Vec<SceneLine>, radius: f64, fov: f64) -> (Scene, Camera) {
let scene = Scene { meshes: vec![SceneMesh::solid(Arc::new(mesh), Rgb(160, 165, 175))], lines, radius, ..Default::default() };
let mut cam = Camera { distance: if fov > 0.0 { 20.0 / (fov * 0.5).tan() } else { 50.0 }, fov, ..Default::default() };
cam.set_view(StandardView::Front);
(scene, cam)
}
fn red_pixels(scene: &Scene, cam: &Camera) -> usize {
render(scene, cam, 64, 64).rgba.chunks(4).filter(|p| p[0] > 150 && p[1] < 100 && p[2] < 100).count()
}
/// #4214: a line that is not opaque is blended with what is under it: the grid fades out
/// with the distance, and the fade reaches the picture.
#[test]
fn a_line_that_is_not_opaque_is_blended_with_what_is_under_it() {
let line = |alpha: f32| SceneLine {
points: vec![Vec3::new(-8.0, 2.0, 0.0), Vec3::new(8.0, 2.0, 0.0)],
color: Rgb(0, 0, 255),
alpha,
width: 1.4,
on_top: false,
};
let cam = Camera { distance: 50.0, fov: 0.0, ..Default::default() };
// The blue of the line over the white background, at full strength and at half.
let blue = |alpha: f32| {
let scene = Scene { lines: vec![line(alpha)], radius: 30.0, ..Default::default() };
let img = render(&scene, &cam, 64, 64);
img.rgba.chunks(4).map(|p| p[2] as i32).max().unwrap_or(0)
};
let solid = blue(1.0);
let half = blue(0.5);
assert!(solid > 200, "the opaque line is blue: {solid}");
assert!(half < solid && half > 100, "the half-opaque line is between the background and the line: {half} against {solid}");
}
/// An edge 1 mm behind a sheet is hidden in a close view of a large design. The old test
/// allowed 2e-4 of the depth range, 2e-4 · (8 · 1200 + 2) = 1.92 mm here (orthographic; far
/// more in perspective), so it was drawn on the sheet. Now the allowance is what the sheet's
/// slope spans across the line's width: none facing the camera; tilted 45°, the edge lies
/// 1 / cos 45° = 1.414 mm behind along the view, and the sheet's depth changes 0.3125 mm
/// per pixel, at most 2 · 1.7 · 0.3125 = 1.06 mm over a 1.2 px line (1.7 px from its centre
/// line to the edge of its anti-aliasing).
#[test]
fn edges_behind_a_thin_sheet_stay_hidden_in_close_views() {
for fov in [0.0, 0.6] {
for tilt in [0.0, 45f64.to_radians()] {
// 1 mm behind the sheet, along its normal, across the middle.
let back = Vec3::new(0.0, tilt.cos(), -tilt.sin());
let edge = SceneLine {
points: vec![Vec3::new(-10.0, 0.0, 0.0) + back, Vec3::new(10.0, 0.0, 0.0) + back],
color: Rgb(255, 0, 0),
alpha: 1.0,
width: 1.2,
on_top: false,
};
let (mut scene, cam) = close_view(sheet(tilt, 12.0), vec![edge], 1200.0, fov);
assert_eq!(red_pixels(&scene, &cam), 0, "fov {fov}, tilt {tilt}: the edge behind the sheet shows through it");
scene.lines[0].on_top = true;
assert!(red_pixels(&scene, &cam) > 20, "fov {fov}, tilt {tilt}: the edge is in the picture");
}
}
}
/// Edges lying on a face are drawn whole, however steep the face and whatever the design's
/// size: the outline of a sheet turned 70° away from the camera (its depth changes
/// tan 70° · 0.3125 = 0.86 mm per pixel) and a line across it draw exactly as they do
/// drawn over everything.
#[test]
fn edges_on_a_steep_face_draw_whole() {
let tilt = 70f64.to_radians();
let on = |x: f64, z: f64| Vec3::new(x, z * tilt.tan(), z);
let line = |points: Vec<Vec3>| SceneLine { points, color: Rgb(255, 0, 0), alpha: 1.0, width: 1.2, on_top: false };
for fov in [0.0, 0.6] {
for radius in [30.0, 1200.0] {
let lines = vec![
line(vec![on(-15.0, -5.0), on(15.0, -5.0), on(15.0, 5.0), on(-15.0, 5.0), on(-15.0, -5.0)]),
line(vec![on(-10.0, 1.5), on(10.0, 1.5)]),
];
let (mut scene, cam) = close_view(sheet(tilt, 5.0), lines, radius, fov);
let drawn = red_pixels(&scene, &cam);
for l in &mut scene.lines {
l.on_top = true;
}
let whole = red_pixels(&scene, &cam);
assert!(whole > 100, "fov {fov}, radius {radius}: {whole} line pixels");
assert_eq!(drawn, whole, "fov {fov}, radius {radius}: parts of the lines on the face are hidden");
}
}
}
}