Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

50.1 KB
Raw Blame
{
  "commands": [
    {
      "command": "file.new",
      "params": {
        "name": "Original two tumblers in a warm sitting room"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Room floor",
        "corner": [
          -2400,
          -1800,
          -30
        ],
        "length": 4800,
        "width": 4300,
        "height": 30,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Rear plaster wall",
        "corner": [
          -2400,
          2000,
          0
        ],
        "length": 4800,
        "width": 30,
        "height": 2300,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Left plaster wall",
        "corner": [
          -2400,
          -1800,
          0
        ],
        "length": 30,
        "width": 3800,
        "height": 2300,
        "operation": "new"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Walnut tabletop profile",
        "plane": {
          "origin": [
            0,
            0,
            445
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -600.0,
          -350.0
        ],
        "p1": [
          600.0,
          350.0
        ],
        "radius": 55
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 35,
        "operation": "new",
        "body_name": "Walnut tabletop"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Table leg 1 profile",
        "plane": {
          "origin": [
            -470,
            -230,
            0
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -27.5,
          -27.5
        ],
        "p1": [
          27.5,
          27.5
        ],
        "radius": 12
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 445,
        "operation": "new",
        "body_name": "Table leg 1"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Table leg 2 profile",
        "plane": {
          "origin": [
            470,
            -230,
            0
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -27.5,
          -27.5
        ],
        "p1": [
          27.5,
          27.5
        ],
        "radius": 12
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 445,
        "operation": "new",
        "body_name": "Table leg 2"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Table leg 3 profile",
        "plane": {
          "origin": [
            -470,
            230,
            0
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -27.5,
          -27.5
        ],
        "p1": [
          27.5,
          27.5
        ],
        "radius": 12
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 445,
        "operation": "new",
        "body_name": "Table leg 3"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Table leg 4 profile",
        "plane": {
          "origin": [
            470,
            230,
            0
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -27.5,
          -27.5
        ],
        "p1": [
          27.5,
          27.5
        ],
        "radius": 12
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 445,
        "operation": "new",
        "body_name": "Table leg 4"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Tall thick tumbler profile",
        "plane": {
          "origin": [
            0,
            0,
            0
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            0,
            1
          ]
        }
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            0,
            0
          ],
          [
            36,
            0
          ],
          [
            42,
            112
          ],
          [
            37.5,
            112
          ],
          [
            31.5,
            9
          ],
          [
            0,
            9
          ]
        ],
        "closed": true,
        "infer": false
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.revolve",
      "params": {
        "axis": "y",
        "angle": "360 deg",
        "operation": "new",
        "body_name": "Tall thick tumbler"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Tall thick tumbler"
        ],
        "translate": [
          -102,
          -88,
          480
        ]
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Short thick tumbler profile",
        "plane": {
          "origin": [
            0,
            0,
            0
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            0,
            1
          ]
        }
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            0,
            0
          ],
          [
            37,
            0
          ],
          [
            43,
            94
          ],
          [
            38,
            94
          ],
          [
            32,
            10
          ],
          [
            0,
            10
          ]
        ],
        "closed": true,
        "infer": false
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.revolve",
      "params": {
        "axis": "y",
        "angle": "360 deg",
        "operation": "new",
        "body_name": "Short thick tumbler"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Short thick tumbler"
        ],
        "translate": [
          88,
          35,
          480
        ]
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Sofa plinth profile",
        "plane": {
          "origin": [
            0,
            1075,
            95
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -840.0,
          -335.0
        ],
        "p1": [
          840.0,
          335.0
        ],
        "radius": 65
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 140,
        "operation": "new",
        "body_name": "Sofa plinth"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Sofa back profile",
        "plane": {
          "origin": [
            0,
            1350,
            235
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -840.0,
          -80.0
        ],
        "p1": [
          840.0,
          80.0
        ],
        "radius": 65
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 510,
        "operation": "new",
        "body_name": "Sofa back"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Left sofa arm profile",
        "plane": {
          "origin": [
            -760,
            1050,
            235
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -80.0,
          -325.0
        ],
        "p1": [
          80.0,
          325.0
        ],
        "radius": 60
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 345,
        "operation": "new",
        "body_name": "Left sofa arm"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Right sofa arm profile",
        "plane": {
          "origin": [
            760,
            1050,
            235
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -80.0,
          -325.0
        ],
        "p1": [
          80.0,
          325.0
        ],
        "radius": 60
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 345,
        "operation": "new",
        "body_name": "Right sofa arm"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Seat cushion 1",
        "corner": [
          -227.5,
          -270.0,
          -75.0
        ],
        "length": 455,
        "width": 540,
        "height": 150,
        "operation": "new"
      }
    },
    {
      "command": "solid.fillet",
      "params": {
        "body": "Seat cushion 1",
        "edges": [
          [
            0,
            -270.0,
            -75.0
          ],
          [
            0,
            -270.0,
            75.0
          ],
          [
            0,
            270.0,
            -75.0
          ],
          [
            0,
            270.0,
            75.0
          ],
          [
            -227.5,
            0,
            -75.0
          ],
          [
            -227.5,
            0,
            75.0
          ],
          [
            227.5,
            0,
            -75.0
          ],
          [
            227.5,
            0,
            75.0
          ],
          [
            -227.5,
            -270.0,
            0
          ],
          [
            -227.5,
            270.0,
            0
          ],
          [
            227.5,
            -270.0,
            0
          ],
          [
            227.5,
            270.0,
            0
          ]
        ],
        "radius": 55
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Seat cushion 1"
        ],
        "translate": [
          -460,
          1020,
          285
        ]
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Back cushion 1",
        "corner": [
          -225.0,
          -90.0,
          -202.5
        ],
        "length": 450,
        "width": 180,
        "height": 405,
        "operation": "new"
      }
    },
    {
      "command": "solid.fillet",
      "params": {
        "body": "Back cushion 1",
        "edges": [
          [
            0,
            -90.0,
            -202.5
          ],
          [
            0,
            -90.0,
            202.5
          ],
          [
            0,
            90.0,
            -202.5
          ],
          [
            0,
            90.0,
            202.5
          ],
          [
            -225.0,
            0,
            -202.5
          ],
          [
            -225.0,
            0,
            202.5
          ],
          [
            225.0,
            0,
            -202.5
          ],
          [
            225.0,
            0,
            202.5
          ],
          [
            -225.0,
            -90.0,
            0
          ],
          [
            -225.0,
            90.0,
            0
          ],
          [
            225.0,
            -90.0,
            0
          ],
          [
            225.0,
            90.0,
            0
          ]
        ],
        "radius": 65
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Back cushion 1"
        ],
        "translate": [
          -460,
          1230,
          545
        ]
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Seat cushion 2",
        "corner": [
          -227.5,
          -270.0,
          -75.0
        ],
        "length": 455,
        "width": 540,
        "height": 150,
        "operation": "new"
      }
    },
    {
      "command": "solid.fillet",
      "params": {
        "body": "Seat cushion 2",
        "edges": [
          [
            0,
            -270.0,
            -75.0
          ],
          [
            0,
            -270.0,
            75.0
          ],
          [
            0,
            270.0,
            -75.0
          ],
          [
            0,
            270.0,
            75.0
          ],
          [
            -227.5,
            0,
            -75.0
          ],
          [
            -227.5,
            0,
            75.0
          ],
          [
            227.5,
            0,
            -75.0
          ],
          [
            227.5,
            0,
            75.0
          ],
          [
            -227.5,
            -270.0,
            0
          ],
          [
            -227.5,
            270.0,
            0
          ],
          [
            227.5,
            -270.0,
            0
          ],
          [
            227.5,
            270.0,
            0
          ]
        ],
        "radius": 55
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Seat cushion 2"
        ],
        "translate": [
          0,
          1020,
          285
        ]
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Back cushion 2",
        "corner": [
          -225.0,
          -90.0,
          -202.5
        ],
        "length": 450,
        "width": 180,
        "height": 405,
        "operation": "new"
      }
    },
    {
      "command": "solid.fillet",
      "params": {
        "body": "Back cushion 2",
        "edges": [
          [
            0,
            -90.0,
            -202.5
          ],
          [
            0,
            -90.0,
            202.5
          ],
          [
            0,
            90.0,
            -202.5
          ],
          [
            0,
            90.0,
            202.5
          ],
          [
            -225.0,
            0,
            -202.5
          ],
          [
            -225.0,
            0,
            202.5
          ],
          [
            225.0,
            0,
            -202.5
          ],
          [
            225.0,
            0,
            202.5
          ],
          [
            -225.0,
            -90.0,
            0
          ],
          [
            -225.0,
            90.0,
            0
          ],
          [
            225.0,
            -90.0,
            0
          ],
          [
            225.0,
            90.0,
            0
          ]
        ],
        "radius": 65
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Back cushion 2"
        ],
        "translate": [
          0,
          1230,
          545
        ]
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Seat cushion 3",
        "corner": [
          -227.5,
          -270.0,
          -75.0
        ],
        "length": 455,
        "width": 540,
        "height": 150,
        "operation": "new"
      }
    },
    {
      "command": "solid.fillet",
      "params": {
        "body": "Seat cushion 3",
        "edges": [
          [
            0,
            -270.0,
            -75.0
          ],
          [
            0,
            -270.0,
            75.0
          ],
          [
            0,
            270.0,
            -75.0
          ],
          [
            0,
            270.0,
            75.0
          ],
          [
            -227.5,
            0,
            -75.0
          ],
          [
            -227.5,
            0,
            75.0
          ],
          [
            227.5,
            0,
            -75.0
          ],
          [
            227.5,
            0,
            75.0
          ],
          [
            -227.5,
            -270.0,
            0
          ],
          [
            -227.5,
            270.0,
            0
          ],
          [
            227.5,
            -270.0,
            0
          ],
          [
            227.5,
            270.0,
            0
          ]
        ],
        "radius": 55
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Seat cushion 3"
        ],
        "translate": [
          460,
          1020,
          285
        ]
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Back cushion 3",
        "corner": [
          -225.0,
          -90.0,
          -202.5
        ],
        "length": 450,
        "width": 180,
        "height": 405,
        "operation": "new"
      }
    },
    {
      "command": "solid.fillet",
      "params": {
        "body": "Back cushion 3",
        "edges": [
          [
            0,
            -90.0,
            -202.5
          ],
          [
            0,
            -90.0,
            202.5
          ],
          [
            0,
            90.0,
            -202.5
          ],
          [
            0,
            90.0,
            202.5
          ],
          [
            -225.0,
            0,
            -202.5
          ],
          [
            -225.0,
            0,
            202.5
          ],
          [
            225.0,
            0,
            -202.5
          ],
          [
            225.0,
            0,
            202.5
          ],
          [
            -225.0,
            -90.0,
            0
          ],
          [
            -225.0,
            90.0,
            0
          ],
          [
            225.0,
            -90.0,
            0
          ],
          [
            225.0,
            90.0,
            0
          ]
        ],
        "radius": 65
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Back cushion 3"
        ],
        "translate": [
          460,
          1230,
          545
        ]
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Ochre throw cushion",
        "corner": [
          -157.5,
          -65.0,
          -165.0
        ],
        "length": 315,
        "width": 130,
        "height": 330,
        "operation": "new"
      }
    },
    {
      "command": "solid.fillet",
      "params": {
        "body": "Ochre throw cushion",
        "edges": [
          [
            0,
            -65.0,
            -165.0
          ],
          [
            0,
            -65.0,
            165.0
          ],
          [
            0,
            65.0,
            -165.0
          ],
          [
            0,
            65.0,
            165.0
          ],
          [
            -157.5,
            0,
            -165.0
          ],
          [
            -157.5,
            0,
            165.0
          ],
          [
            157.5,
            0,
            -165.0
          ],
          [
            157.5,
            0,
            165.0
          ],
          [
            -157.5,
            -65.0,
            0
          ],
          [
            -157.5,
            65.0,
            0
          ],
          [
            157.5,
            -65.0,
            0
          ],
          [
            157.5,
            65.0,
            0
          ]
        ],
        "radius": 55
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Ochre throw cushion"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "-18 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Ochre throw cushion"
        ],
        "translate": [
          -520,
          1090,
          560
        ]
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Taupe throw cushion",
        "corner": [
          -145.0,
          -65.0,
          -155.0
        ],
        "length": 290,
        "width": 130,
        "height": 310,
        "operation": "new"
      }
    },
    {
      "command": "solid.fillet",
      "params": {
        "body": "Taupe throw cushion",
        "edges": [
          [
            0,
            -65.0,
            -155.0
          ],
          [
            0,
            -65.0,
            155.0
          ],
          [
            0,
            65.0,
            -155.0
          ],
          [
            0,
            65.0,
            155.0
          ],
          [
            -145.0,
            0,
            -155.0
          ],
          [
            -145.0,
            0,
            155.0
          ],
          [
            145.0,
            0,
            -155.0
          ],
          [
            145.0,
            0,
            155.0
          ],
          [
            -145.0,
            -65.0,
            0
          ],
          [
            -145.0,
            65.0,
            0
          ],
          [
            145.0,
            -65.0,
            0
          ],
          [
            145.0,
            65.0,
            0
          ]
        ],
        "radius": 55
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Taupe throw cushion"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "16 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Taupe throw cushion"
        ],
        "translate": [
          530,
          1115,
          545
        ]
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Plant stand profile",
        "plane": {
          "origin": [
            620,
            575,
            0
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -100.0,
          -100.0
        ],
        "p1": [
          100.0,
          100.0
        ],
        "radius": 30
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 430,
        "operation": "new",
        "body_name": "Plant stand"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Ceramic plant pot",
        "base": [
          620,
          575,
          430
        ],
        "radius": 82,
        "height": 146,
        "axis": "Z",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          620,
          575,
          442
        ],
        "radius": 73,
        "height": 136,
        "operation": "cut",
        "targets": [
          "Ceramic plant pot"
        ],
        "name": "Open ceramic pot"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Pot soil",
        "base": [
          620,
          575,
          550
        ],
        "radius": 71,
        "height": 8,
        "axis": "Z",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plant stem 1",
        "base": [
          620,
          575,
          556
        ],
        "radius": 2.5,
        "height": 200.6888138387389,
        "axis": [
          100.0,
          0.0,
          174
        ],
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Plant leaf 1",
        "center": [
          0,
          0,
          0
        ],
        "radius": 1,
        "operation": "new"
      }
    },
    {
      "command": "solid.scale",
      "params": {
        "bodies": [
          "Plant leaf 1"
        ],
        "factors": [
          62,
          23,
          4
        ]
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 1"
        ],
        "translate": [
          720.0,
          575.0,
          730
        ]
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plant stem 2",
        "base": [
          620,
          575,
          556
        ],
        "radius": 2.5,
        "height": 266.5933232472261,
        "axis": [
          -91.42238976445537,
          83.77318574434184,
          236
        ],
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Plant leaf 2",
        "center": [
          0,
          0,
          0
        ],
        "radius": 1,
        "operation": "new"
      }
    },
    {
      "command": "solid.scale",
      "params": {
        "bodies": [
          "Plant leaf 2"
        ],
        "factors": [
          62,
          23,
          4
        ]
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 2"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "137.5 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 2"
        ],
        "translate": [
          528.5776102355446,
          658.7731857443418,
          792
        ]
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plant stem 3",
        "base": [
          620,
          575,
          556
        ],
        "radius": 2.5,
        "height": 332.7281172368816,
        "axis": [
          12.899049926653333,
          -147.43681531757835,
          298
        ],
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Plant leaf 3",
        "center": [
          0,
          0,
          0
        ],
        "radius": 1,
        "operation": "new"
      }
    },
    {
      "command": "solid.scale",
      "params": {
        "bodies": [
          "Plant leaf 3"
        ],
        "factors": [
          62,
          23,
          4
        ]
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 3"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "275.0 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 3"
        ],
        "translate": [
          632.8990499266533,
          427.56318468242165,
          854
        ]
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plant stem 4",
        "base": [
          620,
          575,
          556
        ],
        "radius": 2.5,
        "height": 373.6308338453881,
        "axis": [
          60.87614290087208,
          79.33533402912349,
          360
        ],
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Plant leaf 4",
        "center": [
          0,
          0,
          0
        ],
        "radius": 1,
        "operation": "new"
      }
    },
    {
      "command": "solid.scale",
      "params": {
        "bodies": [
          "Plant leaf 4"
        ],
        "factors": [
          62,
          23,
          4
        ]
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 4"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "412.5 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 4"
        ],
        "translate": [
          680.8761429008721,
          654.3353340291235,
          916
        ]
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plant stem 5",
        "base": [
          620,
          575,
          556
        ],
        "radius": 2.5,
        "height": 213.66328650472454,
        "axis": [
          -122.11616137351382,
          -21.532374030699316,
          174
        ],
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Plant leaf 5",
        "center": [
          0,
          0,
          0
        ],
        "radius": 1,
        "operation": "new"
      }
    },
    {
      "command": "solid.scale",
      "params": {
        "bodies": [
          "Plant leaf 5"
        ],
        "factors": [
          62,
          23,
          4
        ]
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 5"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "550.0 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 5"
        ],
        "translate": [
          497.8838386264862,
          553.4676259693007,
          730
        ]
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plant stem 6",
        "base": [
          620,
          575,
          556
        ],
        "radius": 2.5,
        "height": 278.5677655436824,
        "axis": [
          124.821933980307,
          -79.52034203533003,
          236
        ],
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Plant leaf 6",
        "center": [
          0,
          0,
          0
        ],
        "radius": 1,
        "operation": "new"
      }
    },
    {
      "command": "solid.scale",
      "params": {
        "bodies": [
          "Plant leaf 6"
        ],
        "factors": [
          62,
          23,
          4
        ]
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 6"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "687.5 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 6"
        ],
        "translate": [
          744.821933980307,
          495.47965796466997,
          792
        ]
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plant stem 7",
        "base": [
          620,
          575,
          556
        ],
        "radius": 2.5,
        "height": 314.33103569326397,
        "axis": [
          -25.881904510251957,
          96.59258262890683,
          298
        ],
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Plant leaf 7",
        "center": [
          0,
          0,
          0
        ],
        "radius": 1,
        "operation": "new"
      }
    },
    {
      "command": "solid.scale",
      "params": {
        "bodies": [
          "Plant leaf 7"
        ],
        "factors": [
          62,
          23,
          4
        ]
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 7"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "825.0 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 7"
        ],
        "translate": [
          594.118095489748,
          671.5925826289068,
          854
        ]
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plant stem 8",
        "base": [
          620,
          575,
          556
        ],
        "radius": 2.5,
        "height": 380.7571404451924,
        "axis": [
          -57.256828041144104,
          -109.98934331409953,
          360
        ],
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Plant leaf 8",
        "center": [
          0,
          0,
          0
        ],
        "radius": 1,
        "operation": "new"
      }
    },
    {
      "command": "solid.scale",
      "params": {
        "bodies": [
          "Plant leaf 8"
        ],
        "factors": [
          62,
          23,
          4
        ]
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 8"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "962.5 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 8"
        ],
        "translate": [
          562.7431719588559,
          465.01065668590047,
          916
        ]
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plant stem 9",
        "base": [
          620,
          575,
          556
        ],
        "radius": 2.5,
        "height": 228.42942017174585,
        "axis": [
          139.07450787631456,
          50.61898121219883,
          174
        ],
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Plant leaf 9",
        "center": [
          0,
          0,
          0
        ],
        "radius": 1,
        "operation": "new"
      }
    },
    {
      "command": "solid.scale",
      "params": {
        "bodies": [
          "Plant leaf 9"
        ],
        "factors": [
          62,
          23,
          4
        ]
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 9"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "1100.0 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 9"
        ],
        "translate": [
          759.0745078763146,
          625.6189812121988,
          730
        ]
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plant stem 10",
        "base": [
          620,
          575,
          556
        ],
        "radius": 2.5,
        "height": 256.3123094976127,
        "axis": [
          -92.38795325112869,
          38.26834323650894,
          236
        ],
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Plant leaf 10",
        "center": [
          0,
          0,
          0
        ],
        "radius": 1,
        "operation": "new"
      }
    },
    {
      "command": "solid.scale",
      "params": {
        "bodies": [
          "Plant leaf 10"
        ],
        "factors": [
          62,
          23,
          4
        ]
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 10"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "1237.5 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 10"
        ],
        "translate": [
          527.6120467488713,
          613.2683432365089,
          792
        ]
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plant stem 11",
        "base": [
          620,
          575,
          556
        ],
        "radius": 2.5,
        "height": 322.7692674341843,
        "axis": [
          52.404664455846614,
          -112.38216559254465,
          298
        ],
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Plant leaf 11",
        "center": [
          0,
          0,
          0
        ],
        "radius": 1,
        "operation": "new"
      }
    },
    {
      "command": "solid.scale",
      "params": {
        "bodies": [
          "Plant leaf 11"
        ],
        "factors": [
          62,
          23,
          4
        ]
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 11"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "1375.0 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 11"
        ],
        "translate": [
          672.4046644558466,
          462.61783440745535,
          854
        ]
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plant stem 12",
        "base": [
          620,
          575,
          556
        ],
        "radius": 2.5,
        "height": 389.2351474366106,
        "axis": [
          44.5044583266324,
          141.15010871073764,
          360
        ],
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Plant leaf 12",
        "center": [
          0,
          0,
          0
        ],
        "radius": 1,
        "operation": "new"
      }
    },
    {
      "command": "solid.scale",
      "params": {
        "bodies": [
          "Plant leaf 12"
        ],
        "factors": [
          62,
          23,
          4
        ]
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 12"
        ],
        "axis": [
          0,
          0,
          1
        ],
        "angle": "1512.5 deg"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plant leaf 12"
        ],
        "translate": [
          664.5044583266324,
          716.1501087107376,
          916
        ]
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 1",
        "corner": [
          -1030,
          1440,
          660
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 2",
        "corner": [
          -1030,
          1440,
          705
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 3",
        "corner": [
          -1030,
          1440,
          750
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 4",
        "corner": [
          -1030,
          1440,
          795
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 5",
        "corner": [
          -1030,
          1440,
          840
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 6",
        "corner": [
          -1030,
          1440,
          885
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 7",
        "corner": [
          -1030,
          1440,
          930
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 8",
        "corner": [
          -1030,
          1440,
          975
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 9",
        "corner": [
          -1030,
          1440,
          1020
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 10",
        "corner": [
          -1030,
          1440,
          1065
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 11",
        "corner": [
          -1030,
          1440,
          1110
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 12",
        "corner": [
          -1030,
          1440,
          1155
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 13",
        "corner": [
          -1030,
          1440,
          1200
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window blind slat 14",
        "corner": [
          -1030,
          1440,
          1245
        ],
        "length": 850,
        "width": 52,
        "height": 12,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window jamb -1048",
        "corner": [
          -1048,
          1434,
          620
        ],
        "length": 18,
        "width": 70,
        "height": 710,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window jamb -180",
        "corner": [
          -180,
          1434,
          620
        ],
        "length": 18,
        "width": 70,
        "height": 710,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window rail 620",
        "corner": [
          -1030,
          1434,
          620
        ],
        "length": 850,
        "width": 70,
        "height": 18,
        "operation": "new"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Window rail 1320",
        "corner": [
          -1030,
          1434,
          1320
        ],
        "length": 850,
        "width": 70,
        "height": 18,
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Blind cord -860",
        "base": [
          -860,
          1425,
          635
        ],
        "radius": 1.5,
        "height": 690,
        "axis": "Z",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Blind cord -350",
        "base": [
          -350,
          1425,
          635
        ],
        "radius": 1.5,
        "height": 690,
        "axis": "Z",
        "operation": "new"
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Room floor"
        ],
        "color": "#e8e8e8",
        "pbr": {
          "metallic": 0,
          "roughness": 0.65,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Walnut tabletop",
          "Table leg 1",
          "Table leg 2",
          "Table leg 3",
          "Table leg 4",
          "Plant stand"
        ],
        "color": "#4c2818",
        "pbr": {
          "metallic": 0,
          "roughness": 0.42,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Sofa back",
          "Left sofa arm",
          "Right sofa arm",
          "Seat cushion 1",
          "Back cushion 1",
          "Seat cushion 2",
          "Back cushion 2",
          "Seat cushion 3",
          "Back cushion 3",
          "Blind cord -860",
          "Blind cord -350"
        ],
        "color": "#ada69b",
        "pbr": {
          "metallic": 0,
          "roughness": 0.88,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Ochre throw cushion"
        ],
        "color": "#a66c32",
        "pbr": {
          "metallic": 0,
          "roughness": 0.9,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Sofa plinth",
          "Taupe throw cushion"
        ],
        "color": "#71685e",
        "pbr": {
          "metallic": 0,
          "roughness": 0.9,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Plant leaf 1",
          "Plant leaf 2",
          "Plant leaf 3",
          "Plant leaf 4",
          "Plant leaf 5",
          "Plant leaf 6",
          "Plant leaf 7",
          "Plant leaf 8",
          "Plant leaf 9",
          "Plant leaf 10",
          "Plant leaf 11",
          "Plant leaf 12"
        ],
        "color": "#315a2b",
        "pbr": {
          "metallic": 0,
          "roughness": 0.6,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Plant stem 1",
          "Plant stem 2",
          "Plant stem 3",
          "Plant stem 4",
          "Plant stem 5",
          "Plant stem 6",
          "Plant stem 7",
          "Plant stem 8",
          "Plant stem 9",
          "Plant stem 10",
          "Plant stem 11",
          "Plant stem 12"
        ],
        "color": "#425c2b",
        "pbr": {
          "metallic": 0,
          "roughness": 0.75,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Pot soil"
        ],
        "color": "#23190f",
        "pbr": {
          "metallic": 0,
          "roughness": 1,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Ceramic plant pot"
        ],
        "color": "#b4b3a5",
        "pbr": {
          "metallic": 0,
          "roughness": 0.38,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Rear plaster wall",
          "Left plaster wall",
          "Window jamb -1048",
          "Window jamb -180",
          "Window rail 620",
          "Window rail 1320"
        ],
        "color": "#ded9d1",
        "pbr": {
          "metallic": 0,
          "roughness": 0.85,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Window blind slat 1",
          "Window blind slat 2",
          "Window blind slat 3",
          "Window blind slat 4",
          "Window blind slat 5",
          "Window blind slat 6",
          "Window blind slat 7",
          "Window blind slat 8",
          "Window blind slat 9",
          "Window blind slat 10",
          "Window blind slat 11",
          "Window blind slat 12",
          "Window blind slat 13",
          "Window blind slat 14"
        ],
        "color": "#bdac91",
        "pbr": {
          "metallic": 0,
          "roughness": 0.7,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Tall thick tumbler",
          "Short thick tumbler"
        ],
        "color": "#ffffff",
        "pbr": {
          "metallic": 0,
          "roughness": 0.045,
          "dielectric_ior": 1.5
        }
      }
    }
  ]
}