Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

7.5 KB
Raw Blame
[
 {
  "source": "tangency-labs/solidcraft#4187",
  "why": "no geometry: the fillet guard refusing radii that overlap (largest that fits 0.38 mm), as designed"
 },
 {
  "source": "tangency-labs/solidcraft#4222",
  "why": "no reproduction: a fillet chain on an unknown part, screenshots only"
 },
 {
  "source": "tangency-labs/solidcraft#4235",
  "why": "no reproduction: a 0.5 mm chamfer of a curved chain on an unknown part (0.18.2)"
 },
 {
  "source": "tangency-labs/solidcraft#4241",
  "why": "no reproduction: a screenshot only"
 },
 {
  "source": "tangency-labs/solidcraft#4261",
  "why": "no reproduction: four bottom edges of an unknown part (a stated limit, the blend uses up a face)"
 },
 {
  "source": "tangency-labs/solidcraft#4269",
  "why": "no reproduction: a 3-edge chain on an unknown part (0.18.2), no design"
 },
 {
  "source": "tangency-labs/solidcraft#4276",
  "why": "no reproduction: three curved edges of an unknown part (0.18.2), no design"
 },
 {
  "source": "tangency-labs/solidcraft#4336",
  "why": "no geometry: a sketch fillet between a circle and a line (sketch command)"
 },
 {
  "source": "tangency-labs/solidcraft#4341",
  "why": "no kernel geometry: fillet and chamfer edges found again by position jump to another body (feature references)"
 },
 {
  "source": "tangency-labs/solidcraft#4346",
  "why": "no reproduction: a long curved edge chain on an unknown part (0.18.2), no design"
 },
 {
  "source": "tangency-labs/solidcraft#4366",
  "why": "no reproduction: a 0.2 mm chamfer chain on an unknown part (0.11.1)"
 },
 {
  "source": "tangency-labs/solidcraft#4373",
  "why": "no reproduction: one edge on an unknown part ending at a face parallel to it, no design"
 },
 {
  "source": "tangency-labs/solidcraft#4428",
  "why": "no reproduction: three edges ending at a face parallel to them on an unknown part, no design"
 },
 {
  "source": "tangency-labs/solidcraft#4429",
  "why": "needs the user design: a damper of joined extrudes with six chamfers; the failing chain is not reproducible from the report"
 },
 {
  "source": "tangency-labs/solidcraft#4444",
  "why": "no reproduction: a variable-radius fillet on an unknown part with curved faces, no design"
 },
 {
  "source": "tangency-labs/solidcraft#4472",
  "why": "no geometry: the report arrived empty"
 },
 {
  "source": "tangency-labs/solidcraft#4474",
  "why": "no geometry: a sketch fillet at a zero-length line (sketch command)"
 },
 {
  "source": "tangency-labs/solidcraft#4495",
  "why": "needs the user design: a drafted boss whose corner runs onto a 17 deg face; not reproducible from the screenshot"
 },
 {
  "source": "tangency-labs/solidcraft#4496",
  "why": "no geometry: the report arrived empty"
 },
 {
  "source": "tangency-labs/solidcraft#4498",
  "why": "no geometry: distance-and-angle chamfer exists (UI question)"
 },
 {
  "source": "tangency-labs/solidcraft#4499",
  "why": "needs the user design: a battery caddy with 40 features; the 8-edge outline is not reproducible alone"
 },
 {
  "source": "tangency-labs/solidcraft#4518",
  "why": "no single right answer: a second concave fillet ending on an earlier one's round (how they meet is the method's choice)"
 },
 {
  "source": "tangency-labs/solidcraft#4543",
  "why": "no geometry: the report arrived empty"
 },
 {
  "source": "tangency-labs/solidcraft#4550",
  "why": "no reproduction: one edge on an unknown large part, screenshot only"
 },
 {
  "source": "tangency-labs/solidcraft#4569",
  "why": "no reproduction: an unequal chamfer round a loop on an unknown part (a stated limit)"
 },
 {
  "source": "tangency-labs/solidcraft#4575",
  "why": "no geometry: the reporter withdrew it (chamfer preview works)"
 },
 {
  "source": "tangency-labs/solidcraft#4661",
  "why": "no reproduction: vertical-edge fillets meeting earlier top fillets on an unknown part, no message or design"
 },
 {
  "source": "tangency-labs/solidcraft#4681",
  "why": "no geometry: sketch fillet radius rejects an expression (sketch)"
 },
 {
  "source": "tangency-labs/solidcraft#4690",
  "why": "needs the user design: a 19-feature, 2-body mount; the two edges are not reproducible from the report"
 },
 {
  "source": "tangency-labs/solidcraft#4703",
  "why": "UI only: a hole edge counts as \"2 selected\" (a seam-split circle)"
 },
 {
  "source": "tangency-labs/solidcraft#4716",
  "why": "no reproduction: a 10 mm chamfer beside a circle cuts the far side too, unknown part (0.18.3), no design"
 },
 {
  "source": "tangency-labs/solidcraft#4744",
  "why": "no reproduction: a curved 8-edge chain on an unknown part (0.18.4), no design"
 },
 {
  "source": "tangency-labs/solidcraft#4772",
  "why": "needs the user design: a 26-feature handle (poignee.json) with a fillet along a curve; no small stand-in"
 },
 {
  "source": "tangency-labs/solidcraft#4782",
  "why": "no geometry: a fillet rolling over onto the next face (feature request)"
 },
 {
  "source": "tangency-labs/solidcraft#4793",
  "why": "no reproduction: a 9 mm chamfer of one curved edge on an unknown part (0.18.4)"
 },
 {
  "source": "tangency-labs/solidcraft#4795",
  "why": "needs the user design: a hook of filleted extrudes; the refusal depends on one earlier distance (11+3 vs 12.7+3)"
 },
 {
  "source": "tangency-labs/solidcraft#4806",
  "why": "no reproduction: a 0.2 mm chamfer chain on an unknown part, no design"
 },
 {
  "source": "tangency-labs/solidcraft#4842",
  "why": "no geometry: variable chamfers (feature request)"
 },
 {
  "source": "tangency-labs/solidcraft#4848",
  "why": "no reproduction: a 1 mm chamfer of a curved chain on an unknown part, no design"
 },
 {
  "source": "tangency-labs/solidcraft#4861",
  "why": "UI only: hovered edge contrast"
 },
 {
  "source": "tangency-labs/solidcraft#4871",
  "why": "no reproduction: a join that only touched, fixed on 0.20.0 per the reporter"
 },
 {
  "source": "tangency-labs/solidcraft#4926",
  "why": "no reproduction: two edges on a 14-feature unknown part, no design"
 },
 {
  "source": "tangency-labs/solidcraft#4986",
  "why": "no geometry: Press Pull on chamfers and holes (feature request)"
 },
 {
  "source": "tangency-labs/solidcraft#5000",
  "why": "needs the user design: a 0.02 mm fillet beside a sliver on a key-ring part; the zip holds only a screenshot"
 },
 {
  "source": "tangency-labs/solidcraft#5001",
  "why": "no reproduction: one edge on an unknown part, no design"
 },
 {
  "source": "tangency-labs/solidcraft#5033",
  "why": "no geometry: the tangent chain adds edges the user didn't want (UI; dup of #5328's request)"
 },
 {
  "source": "tangency-labs/solidcraft#5061",
  "why": "needs the user design: a revolved bumper with patterned ribs, chamfers and cuts; no small stand-in"
 },
 {
  "source": "tangency-labs/solidcraft#5134",
  "why": "no geometry: the report arrived empty"
 },
 {
  "source": "tangency-labs/solidcraft#5141",
  "why": "needs the user design: a plate with a triangular rib in a component, a two-distance chamfer cutting too much"
 },
 {
  "source": "tangency-labs/solidcraft#5173",
  "why": "no kernel geometry: an edge pick at a corner point picks one edge silently (command validation)"
 },
 {
  "source": "tangency-labs/solidcraft#5278",
  "why": "needs the user design: a dovetail mount with chamfered holes and rounds; no small stand-in"
 },
 {
  "source": "tangency-labs/solidcraft#5299",
  "why": "needs the user design: a U-shaped part with a hole, a 10 mm chamfer reaching the faces' edges; screenshots only"
 },
 {
  "source": "tangency-labs/solidcraft#5328",
  "why": "no geometry: a fillet option not to follow tangent edges (feature request)"
 },
 {
  "source": "tangency-labs/solidcraft#5401",
  "why": "no geometry: the report arrived empty"
 }
]