Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

6.5 KB
Raw Blame
[
 {
  "source": "tangency-labs/solidcraft#4165",
  "why": "UI only: surface bodies shown with the solid icon in the browser"
 },
 {
  "source": "tangency-labs/solidcraft#4173",
  "why": "no reproduction: an intersect revolve redefined on an unknown part, no design"
 },
 {
  "source": "tangency-labs/solidcraft#4234",
  "why": "no geometry: a loft from a model face (feature request)"
 },
 {
  "source": "tangency-labs/solidcraft#4257",
  "why": "no kernel geometry: surface bodies report a volume and mass (measure, document)"
 },
 {
  "source": "tangency-labs/solidcraft#4358",
  "why": "no kernel geometry: surface loft picks lost between copied sketches with the same curve ids (selection)"
 },
 {
  "source": "tangency-labs/solidcraft#4454",
  "why": "no geometry: a profile that crosses the revolve axis is refused by design (bisecting it at the axis works)"
 },
 {
  "source": "tangency-labs/solidcraft#4465",
  "why": "no kernel geometry: a surface pick kept by curve id resolves to the newest sketch (selection, dup of #4579)"
 },
 {
  "source": "tangency-labs/solidcraft#4506",
  "why": "no geometry: Revolve about a construction axis is not looked up (\"unknown sketch line\", command parameters)"
 },
 {
  "source": "tangency-labs/solidcraft#4521",
  "why": "duplicate of #4689: a profile edge on the revolve axis splits the flat faces"
 },
 {
  "source": "tangency-labs/solidcraft#4524",
  "why": "no reproduction: last command only (a loft join, 0.18.3), no design"
 },
 {
  "source": "tangency-labs/solidcraft#4525",
  "why": "no kernel geometry: boundary surface picks a curve by id from the wrong place (selection)"
 },
 {
  "source": "tangency-labs/solidcraft#4528",
  "why": "no reproduction: a join of two user lofts, no message or design"
 },
 {
  "source": "tangency-labs/solidcraft#4576",
  "why": "no geometry: Revolve about a construction axis (dup of #4506)"
 },
 {
  "source": "tangency-labs/solidcraft#4579",
  "why": "no kernel geometry: surface loft picks by curve id resolve to the wrong sketch (selection; the loft itself builds)"
 },
 {
  "source": "tangency-labs/solidcraft#4606",
  "why": "needs the user design: a swept body of 594 faces (512 cones, 64 spheres) revolve-cut"
 },
 {
  "source": "tangency-labs/solidcraft#4631",
  "why": "duplicate of tessellation/466-revolved-cone-tip-stays-smooth: a cone revolved from a triangle drawn wrong at its tip"
 },
 {
  "source": "tangency-labs/solidcraft#4644",
  "why": "UI only: Fair and Match Surface open no dialog"
 },
 {
  "source": "tangency-labs/solidcraft#4694",
  "why": "no reproduction: last command only (a revolve join), no design"
 },
 {
  "source": "tangency-labs/solidcraft#4696",
  "why": "no reproduction: a revolve join between cone and sphere faces of an unknown part, no design"
 },
 {
  "source": "tangency-labs/solidcraft#4697",
  "why": "no reproduction: last command only (a revolve join), no design"
 },
 {
  "source": "tangency-labs/solidcraft#4699",
  "why": "no reproduction: last command only (a revolve join), no design"
 },
 {
  "source": "tangency-labs/solidcraft#4704",
  "why": "no reproduction: a revolve join between cone and sphere faces of an unknown part, no design"
 },
 {
  "source": "tangency-labs/solidcraft#4715",
  "why": "no single right answer: a railed loft's shape between sections follows the rails' fitted spline (3D sketch fitting)"
 },
 {
  "source": "tangency-labs/solidcraft#4729",
  "why": "no geometry: surface extrude has no To Object extent (feature request)"
 },
 {
  "source": "tangency-labs/solidcraft#4730",
  "why": "no reproduction: a loft join hangs on a user's part, no design"
 },
 {
  "source": "tangency-labs/solidcraft#4737",
  "why": "no kernel geometry: surface extrude takes the newest sketch's curve of the same id (selection, dup of #4465)"
 },
 {
  "source": "tangency-labs/solidcraft#4738",
  "why": "no geometry: Revolve about a construction axis (dup of #4506)"
 },
 {
  "source": "tangency-labs/solidcraft#4828",
  "why": "needs the author's real duct part (STEP operands of a user design); a performance case"
 },
 {
  "source": "tangency-labs/solidcraft#4830",
  "why": "UI only: lofting to a point from the dialog (the command already takes an apex)"
 },
 {
  "source": "tangency-labs/solidcraft#4855",
  "why": "needs the user design: a parametric bearing revolve-cut through ten sketch regions"
 },
 {
  "source": "tangency-labs/solidcraft#4868",
  "why": "UI only: home view theme colours"
 },
 {
  "source": "tangency-labs/solidcraft#4889",
  "why": "no reproduction: a screenshot and a video link, no message"
 },
 {
  "source": "tangency-labs/solidcraft#4900",
  "why": "no reproduction: surface loft between splines refused, no message or design"
 },
 {
  "source": "tangency-labs/solidcraft#4942",
  "why": "no reproduction: a loft join between annuli of a user's part, screenshot only"
 },
 {
  "source": "tangency-labs/solidcraft#4946",
  "why": "no reproduction: last command only (a 15 deg symmetric revolve join), no design"
 },
 {
  "source": "tangency-labs/solidcraft#4961",
  "why": "no geometry: Revolve about a construction axis (dup of #4506)"
 },
 {
  "source": "tangency-labs/solidcraft#5023",
  "why": "no geometry: duplicate profile indexes accepted (command validation)"
 },
 {
  "source": "tangency-labs/solidcraft#5035",
  "why": "no reproduction: a slow revolve cut of a polygon profile on an unknown part (0.18.4)"
 },
 {
  "source": "tangency-labs/solidcraft#5054",
  "why": "no geometry: sketches on a patch body's flat face (feature request)"
 },
 {
  "source": "tangency-labs/solidcraft#5077",
  "why": "no geometry: Revolve taking a body face as its profile (feature request, PR #5170)"
 },
 {
  "source": "tangency-labs/solidcraft#5192",
  "why": "no geometry: \"unknown sketch line\" for the axis (command parameters), no design"
 },
 {
  "source": "tangency-labs/solidcraft#5209",
  "why": "no kernel geometry: surface extrude takes the curve of the same id from another sketch (selection, dup of #4057)"
 },
 {
  "source": "tangency-labs/solidcraft#5283",
  "why": "no single right answer: where a loft from a polygon to an ellipse splits its side faces is the method's choice"
 },
 {
  "source": "tangency-labs/solidcraft#5317",
  "why": "duplicate of #4689: a revolve profile with an edge on the axis splits its flat face into sectors"
 },
 {
  "source": "tangency-labs/solidcraft#5410",
  "why": "no geometry: a sketch can't attach to a face whose history is ambiguous (document, dup of #4325)"
 },
 {
  "source": "tangency-labs/solidcraft#5419",
  "why": "no reproduction: a loft from two circles to one user contour (a mismatched loop count), black viewport, no design"
 }
]