Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

Wave 64/509: kernel-cases: sweeps sweep and pipe cases from #96-#3505 (end scale, rails, corners, closed paths)

Brennen Herbruck1fc1497af3c9
diff --git a/tests/kernel-cases/sweeps/1269-sweep-parallel-orientation-oblique-cylinder/expected.json b/tests/kernel-cases/sweeps/1269-sweep-parallel-orientation-oblique-cylinder/expected.json
new file mode 100644
index 0000000000..a689b0c0e9
--- /dev/null
+++ b/tests/kernel-cases/sweeps/1269-sweep-parallel-orientation-oblique-cylinder/expected.json
@@ -0,0 +1,24 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#1269"
+ ],
+ "what": "a circle of radius 5 on XY swept with orientation parallel along a path rising 20 mm while leaning 20 mm in x (the profile does not turn: a sheared cylinder)",
+ "source": "analytic",
+ "method": "with the profile keeping its attitude the body is an oblique circular cylinder: Cavalieri, V = base area * vertical height = pi 25 * 20 = 1570.8. Area = two discs 2 pi 25 + lateral = perimeter of the right section (ellipse a 5, b 5 cos45) * slant 20 sqrt2 = 921.119 total; bbox x -5..25, y +-5, z 0..20; faces: oblique cylinder and two discs.",
+ "body_count": 1,
+ "volume_mm3": 1570.7963267948967,
+ "area_mm2": 921.1191904850396,
+ "faces": 3,
+ "bbox": {
+ "min": [
+ -5,
+ -5,
+ 0
+ ],
+ "max": [
+ 25,
+ 5,
+ 20
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/1269-sweep-parallel-orientation-oblique-cylinder/recipe.json b/tests/kernel-cases/sweeps/1269-sweep-parallel-orientation-oblique-cylinder/recipe.json
new file mode 100644
index 0000000000..ccfed06f3f
--- /dev/null
+++ b/tests/kernel-cases/sweeps/1269-sweep-parallel-orientation-oblique-cylinder/recipe.json
@@ -0,0 +1,99 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Path"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 20,
+ 20
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "p1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Sec"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 5
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "Sec",
+ "path_sketch": "Path",
+ "path": [
+ "p1"
+ ],
+ "orientation": "parallel",
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/1269-sweep-twisted-square-ninety-degrees/expected.json b/tests/kernel-cases/sweeps/1269-sweep-twisted-square-ninety-degrees/expected.json
new file mode 100644
index 0000000000..eda569765d
--- /dev/null
+++ b/tests/kernel-cases/sweeps/1269-sweep-twisted-square-ninety-degrees/expected.json
@@ -0,0 +1,22 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#1269"
+ ],
+ "what": "a 10 x 10 square swept 40 mm along a straight path while turning 90 degrees about the path",
+ "source": "analytic",
+ "method": "twisting about the section centre does not change the section area, and the centre moves straight along the path: V = A L = 100 * 40 = 4000. Mid-path the square is turned 45 degrees, so the bbox reaches the corners at 5 sqrt(2) = 7.0711 in x and y.",
+ "body_count": 1,
+ "volume_mm3": 4000.0,
+ "bbox": {
+ "min": [
+ -7.0710678,
+ -7.0710678,
+ 0
+ ],
+ "max": [
+ 7.0710678,
+ 7.0710678,
+ 40
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/1269-sweep-twisted-square-ninety-degrees/recipe.json b/tests/kernel-cases/sweeps/1269-sweep-twisted-square-ninety-degrees/recipe.json
new file mode 100644
index 0000000000..9596292bc5
--- /dev/null
+++ b/tests/kernel-cases/sweeps/1269-sweep-twisted-square-ninety-degrees/recipe.json
@@ -0,0 +1,102 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Path"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 0,
+ 40
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "p1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Sec"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 5,
+ 5
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "Sec",
+ "path_sketch": "Path",
+ "path": [
+ "p1"
+ ],
+ "twist": "90 deg",
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/2820-pipe-cut-oblique-hole-through-a-block/expected.json b/tests/kernel-cases/sweeps/2820-pipe-cut-oblique-hole-through-a-block/expected.json
new file mode 100644
index 0000000000..cb6498462c
--- /dev/null
+++ b/tests/kernel-cases/sweeps/2820-pipe-cut-oblique-hole-through-a-block/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#2820"
+ ],
+ "what": "a pipe of diameter 6 cut through a 40 x 40 x 20 block along a line leaning 30 degrees from the vertical",
+ "source": "analytic",
+ "method": "the cylinder between two parallel planes 20 apart, leaning 30 degrees from their normal, has volume pi r^2 h / cos(30) = pi 9 20 / 0.8660 = 653.0 (it crosses both faces well inside the block); V = 32000 - 653.0. Faces: 4 sides, top and bottom with an elliptical hole each, and the hole wall = 7.",
+ "body_count": 1,
+ "volume_mm3": 31347.032228875683,
+ "faces": 7
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/2820-pipe-cut-oblique-hole-through-a-block/recipe.json b/tests/kernel-cases/sweeps/2820-pipe-cut-oblique-hole-through-a-block/recipe.json
new file mode 100644
index 0000000000..60eeca8b2e
--- /dev/null
+++ b/tests/kernel-cases/sweeps/2820-pipe-cut-oblique-hole-through-a-block/recipe.json
@@ -0,0 +1,75 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 40,
+ "width": 40,
+ "height": 20,
+ "corner": [
+ -20,
+ -20,
+ 0
+ ],
+ "body_name": "Block"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Path"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -9.999999999999998,
+ -7.320508075688775
+ ],
+ [
+ 9.999999999999998,
+ 27.320508075688775
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "p1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.pipe",
+ "params": {
+ "path_sketch": "Path",
+ "path": [
+ "p1"
+ ],
+ "diameter": 6,
+ "operation": "cut"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/2820-pipe-hollow-with-a-wall-along-a-bend/expected.json b/tests/kernel-cases/sweeps/2820-pipe-hollow-with-a-wall-along-a-bend/expected.json
new file mode 100644
index 0000000000..8b512d2b48
--- /dev/null
+++ b/tests/kernel-cases/sweeps/2820-pipe-hollow-with-a-wall-along-a-bend/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#2820"
+ ],
+ "what": "a hollow pipe (outer diameter 10, wall 2) along a path of two lines joined by a tangent R20 quarter arc",
+ "source": "analytic",
+ "method": "a tube of constant ring section along a path of length 30 + (pi/2) 20 + 30 = 91.416: V = pi (5^2 - 3^2) L (Pappus: the section centre follows the path; R 20 > 5). Faces: outer cylinder, torus, cylinder; inner cylinder, torus, cylinder; two annular ends = 8.",
+ "body_count": 1,
+ "volume_mm3": 4595.065651620499,
+ "faces": 8
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/2820-pipe-hollow-with-a-wall-along-a-bend/recipe.json b/tests/kernel-cases/sweeps/2820-pipe-hollow-with-a-wall-along-a-bend/recipe.json
new file mode 100644
index 0000000000..11637c5620
--- /dev/null
+++ b/tests/kernel-cases/sweeps/2820-pipe-hollow-with-a-wall-along-a-bend/recipe.json
@@ -0,0 +1,101 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Path"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 0,
+ 30
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "p1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.arc.three_point",
+ "params": {
+ "start": [
+ 0,
+ 30
+ ],
+ "through": [
+ 5.857864376269049,
+ 44.14213562373095
+ ],
+ "end": [
+ 20,
+ 50
+ ],
+ "id": "p2"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 20,
+ 50
+ ],
+ [
+ 50,
+ 50
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "p3"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.pipe",
+ "params": {
+ "path_sketch": "Path",
+ "path": [
+ "p1",
+ "p2",
+ "p3"
+ ],
+ "diameter": 10,
+ "wall": 2,
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3006-second-sweep-from-a-plane-along-a-closed-path/expected.json b/tests/kernel-cases/sweeps/3006-second-sweep-from-a-plane-along-a-closed-path/expected.json
new file mode 100644
index 0000000000..e51433665a
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3006-second-sweep-from-a-plane-along-a-closed-path/expected.json
@@ -0,0 +1,10 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3006"
+ ],
+ "what": "a circle of radius 3 on a plane at 0.5 of a closed circular path (R 30) swept round it, then a 5 x 5 square on a plane at 0.75 swept round the same path and joined (it did not follow the path)",
+ "source": "analytic",
+ "method": "both sections are centred on the path and square to it, so the union is a ring whose section is the union of the disc (r 3) and the square (half side 2.5): A = 25 + 9 pi - A(disc and square), A(disc and square) = integral over x in [-2.5, 2.5] of 2 min(2.5, sqrt(9 - x^2)) = 23.7719; V = A * 2 pi 30 (the same however the square is turned about the path).",
+ "body_count": 1,
+ "volume_mm3": 5561.078930711061
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3006-second-sweep-from-a-plane-along-a-closed-path/recipe.json b/tests/kernel-cases/sweeps/3006-second-sweep-from-a-plane-along-a-closed-path/recipe.json
new file mode 100644
index 0000000000..97300f6922
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3006-second-sweep-from-a-plane-along-a-closed-path/recipe.json
@@ -0,0 +1,134 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Path"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 30
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "construct.plane.along_path",
+ "params": {
+ "path": {
+ "sketch": "Path",
+ "curve": "c1"
+ },
+ "t": 0.5,
+ "name": "P50"
+ }
+ },
+ {
+ "command": "construct.plane.along_path",
+ "params": {
+ "path": {
+ "sketch": "Path",
+ "curve": "c1"
+ },
+ "t": 0.75,
+ "name": "P75"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "P50",
+ "name": "Round"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 3.0
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "P75",
+ "name": "Square"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 2.5,
+ 2.5
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "Round",
+ "path_sketch": "Path",
+ "path": [
+ "c1"
+ ],
+ "operation": "new",
+ "body_name": "RoundBar"
+ }
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "Square",
+ "path_sketch": "Path",
+ "path": [
+ "c1"
+ ],
+ "operation": "join",
+ "targets": [
+ "RoundBar"
+ ]
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle/expected.json b/tests/kernel-cases/sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle/expected.json
new file mode 100644
index 0000000000..013b58a6e7
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle/expected.json
@@ -0,0 +1,22 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3345"
+ ],
+ "what": "a 4 x 3 profile drawn at the middle of the bottom line of a closed 60 x 40 rounded-rectangle path (corner radius 8) and swept round the whole path (walls offset, fillets turned the wrong way)",
+ "source": "analytic",
+ "method": "the profile is centred on the path and square to it, so every part of the path keeps it centred: V = A L with A = 12 and L = 2 * 44 + 2 * 24 + 4 (pi/2) 8 = 186.27 (Pappus on the arcs), V = 2235.2. The tube stays within 2 mm of the path sideways and 1.5 mm up: bbox x +-32, y +-22, z +-1.5.",
+ "body_count": 1,
+ "volume_mm3": 2235.18578948924,
+ "bbox": {
+ "min": [
+ -32,
+ -22,
+ -1.5
+ ],
+ "max": [
+ 32,
+ 22,
+ 1.5
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle/recipe.json b/tests/kernel-cases/sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle/recipe.json
new file mode 100644
index 0000000000..58db40cd0c
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle/recipe.json
@@ -0,0 +1,233 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Path"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -22,
+ -20
+ ],
+ [
+ 22,
+ -20
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "l1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.arc.center_point",
+ "params": {
+ "center": [
+ 22,
+ -12
+ ],
+ "start": [
+ 22,
+ -20
+ ],
+ "end": [
+ 30,
+ -12
+ ]
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 30,
+ -12
+ ],
+ [
+ 30,
+ 12
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "l2"
+ ]
+ }
+ },
+ {
+ "command": "sketch.arc.center_point",
+ "params": {
+ "center": [
+ 22,
+ 12
+ ],
+ "start": [
+ 30,
+ 12
+ ],
+ "end": [
+ 22,
+ 20
+ ]
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 22,
+ 20
+ ],
+ [
+ -22,
+ 20
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "l3"
+ ]
+ }
+ },
+ {
+ "command": "sketch.arc.center_point",
+ "params": {
+ "center": [
+ -22,
+ 12
+ ],
+ "start": [
+ -22,
+ 20
+ ],
+ "end": [
+ -30,
+ 12
+ ]
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -30,
+ 12
+ ],
+ [
+ -30,
+ -12
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "l4"
+ ]
+ }
+ },
+ {
+ "command": "sketch.arc.center_point",
+ "params": {
+ "center": [
+ -22,
+ -12
+ ],
+ "start": [
+ -30,
+ -12
+ ],
+ "end": [
+ -22,
+ -20
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ -20.0,
+ 0.0
+ ],
+ "x_dir": [
+ 0,
+ 1,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Prof"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 2,
+ 1.5
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "Prof",
+ "path_sketch": "Path",
+ "path": [
+ "l1",
+ "a1",
+ "l2",
+ "a2",
+ "l3",
+ "a3",
+ "l4",
+ "a4"
+ ],
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner/expected.json b/tests/kernel-cases/sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner/expected.json
new file mode 100644
index 0000000000..3f3e8c6bb6
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner/expected.json
@@ -0,0 +1,10 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3505"
+ ],
+ "what": "the inner side wall of the vertical leg of a mitred swept bar extruded outward by 3 mm (the wall is a B-spline net in a plane, \"the selected planar face no longer exists\")",
+ "source": "analytic",
+ "method": "bar: 8 x 5 section, path 30 up then 40 across (mitred): V = 40 * 70 = 2800. The inner wall of the vertical leg is the plane x = 4, 5 wide and 26 high (it ends where the mitre meets the horizontal leg underside at z = 26): extruding it 3 mm outward adds 5 * 26 * 3 = 390, a block touching the horizontal leg along z = 26: V = 3190.",
+ "body_count": 1,
+ "volume_mm3": 3190
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner/recipe.json b/tests/kernel-cases/sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner/recipe.json
new file mode 100644
index 0000000000..c4fdd20c30
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner/recipe.json
@@ -0,0 +1,134 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Path"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 0,
+ 30
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "p1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 30
+ ],
+ [
+ 40,
+ 30
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "p2"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Sec"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 4,
+ 2.5
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "Sec",
+ "path_sketch": "Path",
+ "path": [
+ "p1",
+ "p2"
+ ],
+ "operation": "new",
+ "body_name": "Bar"
+ }
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "face": [
+ 4,
+ 0,
+ 15
+ ],
+ "distance": 3,
+ "operation": "join"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/771-sweep-end-scale-cone-frustum/expected.json b/tests/kernel-cases/sweeps/771-sweep-end-scale-cone-frustum/expected.json
new file mode 100644
index 0000000000..e034ea62ab
--- /dev/null
+++ b/tests/kernel-cases/sweeps/771-sweep-end-scale-cone-frustum/expected.json
@@ -0,0 +1,24 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#771",
+ "tangency-labs/solidcraft#1269"
+ ],
+ "what": "a circle of radius 5 swept 30 mm along a straight path with end scale 2",
+ "source": "analytic",
+ "method": "the section scales linearly with the path, so the solid is a cone frustum from r 5 to r 10 over 30 mm: V = h/3 (A1 + A2 + sqrt(A1 A2)) = 10 pi (25 + 100 + 50) = 5497.8; faces: cone and two disc caps.",
+ "body_count": 1,
+ "volume_mm3": 5497.787143782138,
+ "faces": 3,
+ "bbox": {
+ "min": [
+ -10,
+ -10,
+ 0
+ ],
+ "max": [
+ 10,
+ 10,
+ 30
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/771-sweep-end-scale-cone-frustum/recipe.json b/tests/kernel-cases/sweeps/771-sweep-end-scale-cone-frustum/recipe.json
new file mode 100644
index 0000000000..924a5c9070
--- /dev/null
+++ b/tests/kernel-cases/sweeps/771-sweep-end-scale-cone-frustum/recipe.json
@@ -0,0 +1,99 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Path"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 0,
+ 30
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "p1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Sec"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 5
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "Sec",
+ "path_sketch": "Path",
+ "path": [
+ "p1"
+ ],
+ "scale": 2,
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/771-sweep-one-guide-rail-cone-frustum/expected.json b/tests/kernel-cases/sweeps/771-sweep-one-guide-rail-cone-frustum/expected.json
new file mode 100644
index 0000000000..b68a9d7696
--- /dev/null
+++ b/tests/kernel-cases/sweeps/771-sweep-one-guide-rail-cone-frustum/expected.json
@@ -0,0 +1,23 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#771",
+ "tangency-labs/solidcraft#1806"
+ ],
+ "what": "a circle of radius 5 swept 20 mm up a straight path with one guide rail from its point (5,0,0) to (10,0,20)",
+ "source": "analytic",
+ "method": "the profile is scaled by the rail distance from the path, 5 at the start and 10 at the end, linearly: a cone frustum, V = h/3 (A1 + A2 + sqrt(A1 A2)) = 20/3 pi (25 + 100 + 50) = 3665.2.",
+ "body_count": 1,
+ "volume_mm3": 3665.191429188092,
+ "bbox": {
+ "min": [
+ -10,
+ -10,
+ 0
+ ],
+ "max": [
+ 10,
+ 10,
+ 20
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/771-sweep-one-guide-rail-cone-frustum/recipe.json b/tests/kernel-cases/sweeps/771-sweep-one-guide-rail-cone-frustum/recipe.json
new file mode 100644
index 0000000000..2a363c4c36
--- /dev/null
+++ b/tests/kernel-cases/sweeps/771-sweep-one-guide-rail-cone-frustum/recipe.json
@@ -0,0 +1,152 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Path"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 0,
+ 20
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "p1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Sec"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 5
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Rail"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 5,
+ 0
+ ],
+ [
+ 10,
+ 20
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "r1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "Sec",
+ "path_sketch": "Path",
+ "path": [
+ "p1"
+ ],
+ "rails": [
+ {
+ "sketch": "Rail",
+ "curves": [
+ "r1"
+ ]
+ }
+ ],
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/771-sweep-two-guide-rails-cone-frustum/expected.json b/tests/kernel-cases/sweeps/771-sweep-two-guide-rails-cone-frustum/expected.json
new file mode 100644
index 0000000000..e9eeebead4
--- /dev/null
+++ b/tests/kernel-cases/sweeps/771-sweep-two-guide-rails-cone-frustum/expected.json
@@ -0,0 +1,23 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#771",
+ "tangency-labs/solidcraft#1806"
+ ],
+ "what": "a circle of radius 5 swept 20 mm up a straight path between two guide rails from (5,0,0) to (10,0,20) and from (-5,0,0) to (-10,0,20)",
+ "source": "analytic",
+ "method": "the profile follows the rails (its points where they start stay on both) and is sized by their distance, 10 at the start and 20 at the end: the same cone frustum, V = 20/3 pi (25 + 100 + 50) = 3665.2.",
+ "body_count": 1,
+ "volume_mm3": 3665.191429188092,
+ "bbox": {
+ "min": [
+ -10,
+ -10,
+ 0
+ ],
+ "max": [
+ 10,
+ 10,
+ 20
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/771-sweep-two-guide-rails-cone-frustum/recipe.json b/tests/kernel-cases/sweeps/771-sweep-two-guide-rails-cone-frustum/recipe.json
new file mode 100644
index 0000000000..d627792990
--- /dev/null
+++ b/tests/kernel-cases/sweeps/771-sweep-two-guide-rails-cone-frustum/recipe.json
@@ -0,0 +1,177 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Path"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 0,
+ 20
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "p1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Sec"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 5
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Rail"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 5,
+ 0
+ ],
+ [
+ 10,
+ 20
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "r1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -5,
+ 0
+ ],
+ [
+ -10,
+ 20
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "r2"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "Sec",
+ "path_sketch": "Path",
+ "path": [
+ "p1"
+ ],
+ "rails": [
+ {
+ "sketch": "Rail",
+ "curves": [
+ "r1"
+ ]
+ },
+ {
+ "sketch": "Rail",
+ "curves": [
+ "r2"
+ ]
+ }
+ ],
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/96-sweep-rectangle-round-a-mitred-corner/expected.json b/tests/kernel-cases/sweeps/96-sweep-rectangle-round-a-mitred-corner/expected.json
new file mode 100644
index 0000000000..d1e68055e5
--- /dev/null
+++ b/tests/kernel-cases/sweeps/96-sweep-rectangle-round-a-mitred-corner/expected.json
@@ -0,0 +1,22 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#96"
+ ],
+ "what": "an 8 x 5 rectangle swept along a path of a 30 mm vertical line and a 40 mm horizontal line meeting at a sharp corner (walls mitred)",
+ "source": "analytic",
+ "method": "in the bend plane the mitred joint keeps the area w (l1 + l2): the outer side gains exactly what the inner side loses, so V = A (l1 + l2) = 40 * 70 = 2800. bbox: x -4..40, y +-2.5, z 0..34 (the mitred outer corner reaches 30 + 4).",
+ "body_count": 1,
+ "volume_mm3": 2800.0,
+ "bbox": {
+ "min": [
+ -4,
+ -2.5,
+ 0
+ ],
+ "max": [
+ 40,
+ 2.5,
+ 34
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/96-sweep-rectangle-round-a-mitred-corner/recipe.json b/tests/kernel-cases/sweeps/96-sweep-rectangle-round-a-mitred-corner/recipe.json
new file mode 100644
index 0000000000..1d03a3211e
--- /dev/null
+++ b/tests/kernel-cases/sweeps/96-sweep-rectangle-round-a-mitred-corner/recipe.json
@@ -0,0 +1,122 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Path"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 0,
+ 30
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "p1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 30
+ ],
+ [
+ 40,
+ 30
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "p2"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Sec"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 4,
+ 2.5
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "Sec",
+ "path_sketch": "Path",
+ "path": [
+ "p1",
+ "p2"
+ ],
+ "operation": "new",
+ "body_name": "Bar"
+ }
+ }
+ ]
+}
\ No newline at end of file