Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

Wave 236/509: kernel-cases: #5198–#5463 triaged: 14 cases, 100 skipped

jyviko2c2f2e51408d
diff --git a/tests/kernel-cases/booleans/5291-join-pin-on-prism-face-beside-blind-bore/expected.json b/tests/kernel-cases/booleans/5291-join-pin-on-prism-face-beside-blind-bore/expected.json
new file mode 100644
index 0000000000..f70506d390
--- /dev/null
+++ b/tests/kernel-cases/booleans/5291-join-pin-on-prism-face-beside-blind-bore/expected.json
@@ -0,0 +1,10 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5291"
+ ],
+ "what": "a pin (r2.1 x 11) joined on the side face of a triangular prism that has a blind bore running in from its slanted face: the join ground for ~90 s, then 'boolean Union: no result'",
+ "source": "analytic",
+ "method": "prism: the right triangle (0,0),(-15,0),(-15,20) (x, z) x 13 (y 0..-13): 1950. The bore (y -6.5, z 10, r 2.5) runs from x = -10 out through the slanted face x = -0.75 z: removed Int over its disc of (10 - 0.75 z) = pi 6.25 (10 - 7.5). The pin stands on the face y = 0 (its base wholly on the triangle, 2.96 from the slanted edge) out to y = 11: + pi 2.1^2 11",
+ "body_count": 1,
+ "volume_mm3": 2053.3113
+}
diff --git a/tests/kernel-cases/booleans/5291-join-pin-on-prism-face-beside-blind-bore/recipe.json b/tests/kernel-cases/booleans/5291-join-pin-on-prism-face-beside-blind-bore/recipe.json
new file mode 100644
index 0000000000..5a325aabe6
--- /dev/null
+++ b/tests/kernel-cases/booleans/5291-join-pin-on-prism-face-beside-blind-bore/recipe.json
@@ -0,0 +1,93 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Wedge"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ -15,
+ 0
+ ],
+ [
+ -15,
+ 20
+ ]
+ ],
+ "closed": true
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "sketch": "Wedge",
+ "distance": 13,
+ "body_name": "Wedge"
+ }
+ },
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 2.5,
+ "height": 11,
+ "base": [
+ -10,
+ -6.5,
+ 10
+ ],
+ "axis": "X",
+ "operation": "cut",
+ "targets": [
+ "Wedge"
+ ]
+ }
+ },
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 2.1,
+ "height": 11,
+ "base": [
+ -11.8,
+ 0,
+ 10.8
+ ],
+ "axis": "Y",
+ "operation": "join",
+ "targets": [
+ "Wedge"
+ ]
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/booleans/5295-intersect-bar-with-two-mirrored-outlines/expected.json b/tests/kernel-cases/booleans/5295-intersect-bar-with-two-mirrored-outlines/expected.json
new file mode 100644
index 0000000000..9dca314062
--- /dev/null
+++ b/tests/kernel-cases/booleans/5295-intersect-bar-with-two-mirrored-outlines/expected.json
@@ -0,0 +1,10 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5295"
+ ],
+ "what": "a bar intersected in one extrude with two mirrored outlines (slanted on their inner sides): truck deleted the body with only a warning; each outline alone worked",
+ "source": "analytic",
+ "method": "each outline is a trapezoid (20 and 14 wide, 20 high: 340) through the bar's 20 mm: two bodies of 340*20, V = 13600",
+ "body_count": 2,
+ "volume_mm3": 13600.0
+}
diff --git a/tests/kernel-cases/booleans/5295-intersect-bar-with-two-mirrored-outlines/recipe.json b/tests/kernel-cases/booleans/5295-intersect-bar-with-two-mirrored-outlines/recipe.json
new file mode 100644
index 0000000000..25c0260f87
--- /dev/null
+++ b/tests/kernel-cases/booleans/5295-intersect-bar-with-two-mirrored-outlines/recipe.json
@@ -0,0 +1,117 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ -50,
+ -10,
+ 0
+ ],
+ "length": 100,
+ "width": 20,
+ "height": 20,
+ "body_name": "Bar"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Ends",
+ "project_edges": false
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -50,
+ 0
+ ],
+ [
+ -30,
+ 0
+ ],
+ [
+ -36,
+ 20
+ ],
+ [
+ -50,
+ 20
+ ]
+ ],
+ "closed": true
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 50,
+ 0
+ ],
+ [
+ 30,
+ 0
+ ],
+ [
+ 36,
+ 20
+ ],
+ [
+ 50,
+ 20
+ ]
+ ],
+ "closed": true
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "sketch": "Ends",
+ "profiles": [
+ {
+ "point": [
+ -45,
+ 10
+ ]
+ },
+ {
+ "point": [
+ 45,
+ 10
+ ]
+ }
+ ],
+ "distance": 20,
+ "direction": "symmetric",
+ "operation": "intersect"
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/booleans/5322-cut-with-a-5000-mm-tool/expected.json b/tests/kernel-cases/booleans/5322-cut-with-a-5000-mm-tool/expected.json
new file mode 100644
index 0000000000..bb1c8ca17e
--- /dev/null
+++ b/tests/kernel-cases/booleans/5322-cut-with-a-5000-mm-tool/expected.json
@@ -0,0 +1,10 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5322"
+ ],
+ "what": "an r2.5 hole cut through a 40x30x10 block's 30 mm side by a 5000 mm extrude: truck panicked ('tolerance must be no less than 1e-6') at 5000 mm (4999 worked)",
+ "source": "analytic",
+ "method": "the sketch plane's normal is -y, so the negative extrude runs +y through the block whatever its length: V = 40*30*10 - pi*2.5^2*30 = 11410.951",
+ "body_count": 1,
+ "volume_mm3": 11410.9514
+}
diff --git a/tests/kernel-cases/booleans/5322-cut-with-a-5000-mm-tool/recipe.json b/tests/kernel-cases/booleans/5322-cut-with-a-5000-mm-tool/recipe.json
new file mode 100644
index 0000000000..6ae322e9c3
--- /dev/null
+++ b/tests/kernel-cases/booleans/5322-cut-with-a-5000-mm-tool/recipe.json
@@ -0,0 +1,96 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "B"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 0,
+ 0
+ ],
+ "p1": [
+ 40,
+ 30
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 10,
+ "operation": "new"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "H"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 20,
+ 5
+ ],
+ "radius": 2.5
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 5000,
+ "direction": "negative",
+ "operation": "cut"
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/booleans/5353-through-hole-beside-a-blind-drill-tip/expected.json b/tests/kernel-cases/booleans/5353-through-hole-beside-a-blind-drill-tip/expected.json
new file mode 100644
index 0000000000..b8284c0d7e
--- /dev/null
+++ b/tests/kernel-cases/booleans/5353-through-hole-beside-a-blind-drill-tip/expected.json
@@ -0,0 +1,10 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5353"
+ ],
+ "what": "a second plain O9 through hole in a 14 mm base plate, nowhere near a blind drilled O4.2 hole in the tower above: truck refused it, pointing at the blind hole's 118 deg tip ('could not be computed reliably')",
+ "source": "analytic",
+ "method": "base 90x60x14 + tower 50x24x40 = 75600 + 48000; the blind hole (axis y from the tower's -y face, 15.2 to the shoulder + the point cone r/tan59 high): pi 2.1^2 15.2 + pi 2.1^2 (2.1/tan59)/3; two simple O9 holes 14 deep through the plate (the default type is simple, flat-bottomed): 2 pi 4.5^2 14",
+ "body_count": 1,
+ "volume_mm3": 121602.3025
+}
diff --git a/tests/kernel-cases/booleans/5353-through-hole-beside-a-blind-drill-tip/recipe.json b/tests/kernel-cases/booleans/5353-through-hole-beside-a-blind-drill-tip/recipe.json
new file mode 100644
index 0000000000..3a1a583391
--- /dev/null
+++ b/tests/kernel-cases/booleans/5353-through-hole-beside-a-blind-drill-tip/recipe.json
@@ -0,0 +1,90 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 90,
+ "width": 60,
+ "height": 14,
+ "corner": [
+ -45.0,
+ -30.0,
+ 0.0
+ ],
+ "name": "Base"
+ }
+ },
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 50,
+ "width": 24,
+ "height": 40,
+ "corner": [
+ -25.0,
+ -12.0,
+ 14.0
+ ],
+ "operation": "join",
+ "name": "Tower"
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ -16,
+ -12,
+ 34
+ ],
+ "direction": [
+ 0,
+ 1,
+ 0
+ ],
+ "diameter": 4.2,
+ "depth": 15.2,
+ "type": "drilled",
+ "tip_angle": "118 deg",
+ "thread": "M5",
+ "name": "Hole_M5_Blind_1"
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ -32,
+ -20,
+ 14
+ ],
+ "direction": [
+ 0,
+ 0,
+ -1
+ ],
+ "diameter": 9.0,
+ "depth": 14,
+ "name": "Hole_M8_1"
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ -32,
+ 20,
+ 14
+ ],
+ "direction": [
+ 0,
+ 0,
+ -1
+ ],
+ "diameter": 9.0,
+ "depth": 14,
+ "name": "Hole_M8_2"
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/booleans/5413-join-rib-flush-on-channel-floor/expected.json b/tests/kernel-cases/booleans/5413-join-rib-flush-on-channel-floor/expected.json
new file mode 100644
index 0000000000..fb561cb5b1
--- /dev/null
+++ b/tests/kernel-cases/booleans/5413-join-rib-flush-on-channel-floor/expected.json
@@ -0,0 +1,12 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5413",
+ "tangency-labs/solidcraft#4877"
+ ],
+ "what": "a rib joined flush onto the floor of a channel (a box rounded r2.4 on all edges, its 45 wide cavity cut through its top and both ends), its ends buried in the side walls: truck's tool nudge kept both faces of the flush contact, a 0.077 um slit with 450 mm2 too much area",
+ "source": "analytic",
+ "method": "rounded box 55x50x35, r 2.4 (rolling-ball corners): V and A by the usual sums of flat, cylindrical and spherical parts. The cavity x -22.5..22.5, z 5..37, through y, removes 45*(50*30 - 2(1-pi/4)r^2) (the two top x-edge rounds lie in it) and swaps the rounded box's surface inside it (the top, the two top x-edge rounds, the two end faces' flats) for its own floor and side walls (50x30 less the two round corners each). The rib adds its part in the cavity (45x5x10 = 2250); its ends inside the walls add nothing. Area: + rib top 225 + front 450 + end face 450 (its end in the open channel end; the parts in the walls are coplanar with the end face) - the floor under it 225 - the side walls it covers 100 = +800",
+ "body_count": 1,
+ "volume_mm3": 30437.5435,
+ "area_mm2": 13454.3892
+}
diff --git a/tests/kernel-cases/booleans/5413-join-rib-flush-on-channel-floor/recipe.json b/tests/kernel-cases/booleans/5413-join-rib-flush-on-channel-floor/recipe.json
new file mode 100644
index 0000000000..6b01fa3e65
--- /dev/null
+++ b/tests/kernel-cases/booleans/5413-join-rib-flush-on-channel-floor/recipe.json
@@ -0,0 +1,135 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ -27.5,
+ 0,
+ 0
+ ],
+ "length": 55,
+ "width": 50,
+ "height": 35,
+ "body_name": "Channel"
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "body": "Channel",
+ "radius": 2.4,
+ "edges": [
+ [
+ 0,
+ 0,
+ 0
+ ],
+ [
+ 0,
+ 50,
+ 0
+ ],
+ [
+ 0,
+ 0,
+ 35
+ ],
+ [
+ 0,
+ 50,
+ 35
+ ],
+ [
+ -27.5,
+ 25,
+ 0
+ ],
+ [
+ 27.5,
+ 25,
+ 0
+ ],
+ [
+ -27.5,
+ 25,
+ 35
+ ],
+ [
+ 27.5,
+ 25,
+ 35
+ ],
+ [
+ -27.5,
+ 0,
+ 17.5
+ ],
+ [
+ 27.5,
+ 0,
+ 17.5
+ ],
+ [
+ -27.5,
+ 50,
+ 17.5
+ ],
+ [
+ 27.5,
+ 50,
+ 17.5
+ ]
+ ]
+ }
+ },
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ -22.5,
+ 0,
+ 5
+ ],
+ "length": 45,
+ "width": 52,
+ "height": 32,
+ "body_name": "Cavity"
+ }
+ },
+ {
+ "command": "solid.combine",
+ "params": {
+ "target": "Channel",
+ "tools": [
+ "Cavity"
+ ],
+ "operation": "cut"
+ }
+ },
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ -25,
+ 45,
+ 5
+ ],
+ "length": 50,
+ "width": 5,
+ "height": 10,
+ "body_name": "Rib"
+ }
+ },
+ {
+ "command": "solid.combine",
+ "params": {
+ "target": "Channel",
+ "tools": [
+ "Rib"
+ ],
+ "operation": "join"
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/booleans/5462-press-pull-inner-wall-of-rectangular-opening/expected.json b/tests/kernel-cases/booleans/5462-press-pull-inner-wall-of-rectangular-opening/expected.json
new file mode 100644
index 0000000000..c32c06dd1d
--- /dev/null
+++ b/tests/kernel-cases/booleans/5462-press-pull-inner-wall-of-rectangular-opening/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5462"
+ ],
+ "what": "an inner wall of a rectangular opening through a block face-extruded 1 mm back into the material as a cut (what Press Pull runs on a flat face): 'boolean Cut: no result'",
+ "source": "analytic",
+ "method": "block 40x30x10 less the opening 30x20 = 6000; the wall at x = 5 moves to x = 4, removing 1 x 20 x 10: V = 5800, still 10 faces",
+ "body_count": 1,
+ "faces": 10,
+ "volume_mm3": 5800.0
+}
diff --git a/tests/kernel-cases/booleans/5462-press-pull-inner-wall-of-rectangular-opening/recipe.json b/tests/kernel-cases/booleans/5462-press-pull-inner-wall-of-rectangular-opening/recipe.json
new file mode 100644
index 0000000000..aaef1986f0
--- /dev/null
+++ b/tests/kernel-cases/booleans/5462-press-pull-inner-wall-of-rectangular-opening/recipe.json
@@ -0,0 +1,49 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ 0,
+ 0,
+ 0
+ ],
+ "length": 40,
+ "width": 30,
+ "height": 10,
+ "body_name": "Body1"
+ }
+ },
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ 5,
+ 5,
+ -1
+ ],
+ "length": 30,
+ "width": 20,
+ "height": 12,
+ "operation": "cut",
+ "targets": [
+ "Body1"
+ ]
+ }
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "face": [
+ 5,
+ 15,
+ 5
+ ],
+ "face_body": "Body1",
+ "direction": "positive",
+ "distance": "-1",
+ "operation": "cut"
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/booleans/skipped-4161.json b/tests/kernel-cases/booleans/skipped-4161.json
index 0052fb2d3d..839895a21e 100644
--- a/tests/kernel-cases/booleans/skipped-4161.json
+++ b/tests/kernel-cases/booleans/skipped-4161.json
@@ -578,5 +578,209 @@
{
"source": "tangency-labs/solidcraft#5185",
"why": "no geometry: joint solver work while dragging (performance)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5198",
+ "why": "no kernel geometry: a face name stored on one kernel resolves to another face on the other (naming across kernels; the rig runs one kernel)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5199",
+ "why": "UI only: dragging sketch points and dimension numbers"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5201",
+ "why": "no kernel geometry: Deboss needs a complete cylinder or coaxial sleeve (the emboss command's stated limit)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5222",
+ "why": "no reproduction: cuts on a user's STEP freeze on 0.19.0; they work on 0.20.0 with the file from #5344"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5225",
+ "why": "no geometry: a cut into a mesh body is refused by design"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5226",
+ "why": "no geometry: a request to normalise sheet-metal cut faces (feature request)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5227",
+ "why": "UI only: the web build takes the browser's tab shortcuts"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5231",
+ "why": "no geometry: a sketch pattern's spacing parameter link lost (sketch)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5234",
+ "why": "no reproduction: a cut through a surface body shown by screenshot, no design"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5239",
+ "why": "no reproduction: Split Face fails, no message or design"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5266",
+ "why": "no reproduction: a cut on a user's part with 94 cylinder faces, screenshot only"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5276",
+ "why": "no geometry: a face profile from a repeated component needs its occurrence active (document)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5280",
+ "why": "no geometry: a sketch pattern past the solver's 4000 unknowns (sketch)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5284",
+ "why": "needs the user design: a ring nozzle swept and chamfered, joined on coincident cone/cylinder/torus faces"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5285",
+ "why": "no geometry: the report arrived empty (a screenshot)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5288",
+ "why": "UI only: Mirror's feature input cleared on switching type"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5289",
+ "why": "no geometry: sketch Mirror about an origin axis (dup of #4193)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5297",
+ "why": "UI only: sketch snap to line intersections (dup of #4678)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5302",
+ "why": "no kernel geometry: projected face edges split a sketch's region, the extrude takes one (profile picking)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5304",
+ "why": "UI only: undo while drawing a spline"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5305",
+ "why": "UI only: a selection length readout (dup of #2314)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5313",
+ "why": "no geometry: a sketch pattern's seed entities can't be changed (sketch, by design)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5327",
+ "why": "no geometry: sketch pattern counts and spacing as parameters (sketch)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5336",
+ "why": "UI only: the sketch stays hidden while editing its extrude"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5344",
+ "why": "no geometry: an imported STEP cut that works on 0.20.0 (the reporter confirms; dup of #5222)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5348",
+ "why": "no reproduction: a join refused by the volume check on a part shown by screenshot only"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5351",
+ "why": "no geometry: the report arrived empty"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5358",
+ "why": "no kernel geometry: Emboss of text on a cylinder (lines square to the axis only, a stated limit)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5369",
+ "why": "UI only: Wayland by default"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5374",
+ "why": "no geometry: projecting a face seen edge-on (sketch)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5385",
+ "why": "UI only: sketch palette layout"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5386",
+ "why": "UI only: an Onshape-style shortcut set (declined)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5390",
+ "why": "no geometry: a zero move of a body (moving holes, dup of #5399)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5392",
+ "why": "UI only: a design's own units vs the preference"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5394",
+ "why": "UI only: shortcut recording (dup of #1809)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5396",
+ "why": "no geometry: moving a hole after it's made (feature request, dup of #5399)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5399",
+ "why": "no geometry: moving a hole after it's made (feature request)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5400",
+ "why": "no reproduction: last command only (a face cut on an unknown part)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5402",
+ "why": "no geometry: a Mirror feature can't itself be mirrored yet (dup of #395)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5403",
+ "why": "no reproduction: a cut whose facets cross \"could not be intersected\", a user's hinge, no design"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5405",
+ "why": "duplicate of #5403: the same combine cut warning, no design"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5408",
+ "why": "no reproduction: last command only (a cut leaving touching lumps), no design"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5414",
+ "why": "no reproduction: Extrude To Body shown by screenshots only"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5418",
+ "why": "no reproduction: last command only (a cut leaving touching lumps), no design"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5431",
+ "why": "UI only: base planes not pickable behind a body"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5433",
+ "why": "no geometry: the report arrived empty"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5434",
+ "why": "no geometry: no profile picked and a design from a newer file format (user error)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5447",
+ "why": "UI only: error messages are not translated"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5452",
+ "why": "no reproduction: a through-all cut of a part from two sketches, screenshot only"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5457",
+ "why": "UI only: a revolute joint's axis can't be set along an edge (joint dialog)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5458",
+ "why": "UI only: tab management"
}
]
diff --git a/tests/kernel-cases/crashes/skipped-4161.json b/tests/kernel-cases/crashes/skipped-4161.json
index a10915c7d8..e90eb1853e 100644
--- a/tests/kernel-cases/crashes/skipped-4161.json
+++ b/tests/kernel-cases/crashes/skipped-4161.json
@@ -214,5 +214,93 @@
{
"source": "tangency-labs/solidcraft#5189",
"why": "render: lost GPU device (wgpu) in Preferences and the viewport"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5211",
+ "why": "render: GPU out of memory and a capture buffer (#2195), no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5229",
+ "why": "no reproduction: the display triangulation library's assertion, title only"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5243",
+ "why": "no geometry: an empty crash report"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5248",
+ "why": "no geometry: motion trace curves are not associative (feature request)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5251",
+ "why": "no geometry: an empty crash report"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5263",
+ "why": "no reproduction: unclean exit in solid.box after a run of boxes, no sizes and no replay"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5274",
+ "why": "no geometry: unclean exit while dragging a sliding joint (garbage in the window: graphics)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5314",
+ "why": "render: lost GPU device (wgpu), no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5359",
+ "why": "no reproduction: unclean exit after parameter changes in a user's design of box patterns and a loft, nothing given"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5360",
+ "why": "no reproduction: truck intersection-curve panic during a timeline reorder, the design is not given"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5361",
+ "why": "render: Save As thumbnail capture buffer (#4791), no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5372",
+ "why": "render: lost GPU device (wgpu), no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5383",
+ "why": "no reproduction: the display triangulation library's assertion, title only"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5395",
+ "why": "no geometry: unclean exit with no command and no replay"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5407",
+ "why": "UI only: moving a sketch dimension, gone after a restart"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5411",
+ "why": "no geometry: an empty crash report (occurrence.properties, document)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5421",
+ "why": "no geometry: unclean exit after selections, nothing running"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5429",
+ "why": "no reproduction: unclean exit in inspect.interference while an agent cut an O-ring groove in a user's part"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5437",
+ "why": "render: the capture buffer map failure (#2195), no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5438",
+ "why": "render: lost GPU device (wgpu), no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5448",
+ "why": "render: a GPU buffer map failure (#4791), no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5460",
+ "why": "no reproduction: unclean exit during an extrude, title only"
}
]
diff --git a/tests/kernel-cases/fillets/5236-fillet-cylinder-end-with-its-own-radius/expected.json b/tests/kernel-cases/fillets/5236-fillet-cylinder-end-with-its-own-radius/expected.json
new file mode 100644
index 0000000000..abaa719a12
--- /dev/null
+++ b/tests/kernel-cases/fillets/5236-fillet-cylinder-end-with-its-own-radius/expected.json
@@ -0,0 +1,12 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5236",
+ "tangency-labs/solidcraft#3317"
+ ],
+ "what": "the end edge of a cylinder r10 filleted r10, making a hemispherical end: refused ('the blend is larger than a corner radius'); r 9.99 worked",
+ "source": "analytic",
+ "method": "the round of radius equal to the cylinder's is the hemisphere r10 on the cylinder's first 20 mm: V = pi 100 20 + (2/3) pi 1000 = 8377.580. Faces: side, bottom, the spherical end = 3",
+ "body_count": 1,
+ "faces": 3,
+ "volume_mm3": 8377.5804
+}
diff --git a/tests/kernel-cases/fillets/5236-fillet-cylinder-end-with-its-own-radius/recipe.json b/tests/kernel-cases/fillets/5236-fillet-cylinder-end-with-its-own-radius/recipe.json
new file mode 100644
index 0000000000..4d183d54c0
--- /dev/null
+++ b/tests/kernel-cases/fillets/5236-fillet-cylinder-end-with-its-own-radius/recipe.json
@@ -0,0 +1,25 @@
+{
+ "commands": [
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 10,
+ "height": 30,
+ "body_name": "Pin"
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 10,
+ 0,
+ 30
+ ]
+ ],
+ "radius": 10
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/fillets/5300-fillet-tube-rim-as-wide-as-its-wall/expected.json b/tests/kernel-cases/fillets/5300-fillet-tube-rim-as-wide-as-its-wall/expected.json
new file mode 100644
index 0000000000..ba9506785e
--- /dev/null
+++ b/tests/kernel-cases/fillets/5300-fillet-tube-rim-as-wide-as-its-wall/expected.json
@@ -0,0 +1,13 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5300",
+ "tangency-labs/solidcraft#5236",
+ "tangency-labs/solidcraft#3317"
+ ],
+ "what": "the outer top edge of a tube with a 1 mm wall (r 9..10, 20 high) filleted 1 mm: the round spans the whole wall top and meets the inner wall at its edge; truck refused it",
+ "source": "analytic",
+ "method": "the round removes the corner region (1 - pi/4) r^2 (r = 1) at the outer top edge; by Pappus its centroid is at radius 9 + (1/6)/(1-pi/4) = 9.7766: V = pi*(100-81)*20 - 2 pi 9.7766 (1 - pi/4). The top annulus is used up, so the faces are the outer cylinder, the round, the inner cylinder and the bottom = 4",
+ "body_count": 1,
+ "faces": 4,
+ "volume_mm3": 1180.6226
+}
diff --git a/tests/kernel-cases/fillets/5300-fillet-tube-rim-as-wide-as-its-wall/recipe.json b/tests/kernel-cases/fillets/5300-fillet-tube-rim-as-wide-as-its-wall/recipe.json
new file mode 100644
index 0000000000..fe09ecd4b5
--- /dev/null
+++ b/tests/kernel-cases/fillets/5300-fillet-tube-rim-as-wide-as-its-wall/recipe.json
@@ -0,0 +1,61 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 10
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 9
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 20,
+ "profiles": [
+ {
+ "point": [
+ 9.5,
+ 0
+ ]
+ }
+ ]
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 10,
+ 0,
+ 20
+ ]
+ ],
+ "radius": 1
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/fillets/skipped-4161.json b/tests/kernel-cases/fillets/skipped-4161.json
index 5cb5dcd210..540b84fec8 100644
--- a/tests/kernel-cases/fillets/skipped-4161.json
+++ b/tests/kernel-cases/fillets/skipped-4161.json
@@ -198,5 +198,21 @@
{
"source": "tangency-labs/solidcraft#5173",
"why": "no kernel geometry: an edge pick at a corner point picks one edge silently (command validation)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5278",
+ "why": "needs the user design: a dovetail mount with chamfered holes and rounds; no small stand-in"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5299",
+ "why": "needs the user design: a U-shaped part with a hole, a 10 mm chamfer reaching the faces' edges; screenshots only"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5328",
+ "why": "no geometry: a fillet option not to follow tangent edges (feature request)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5401",
+ "why": "no geometry: the report arrived empty"
}
]
diff --git a/tests/kernel-cases/import/skipped-4161.json b/tests/kernel-cases/import/skipped-4161.json
index 7643c36eba..5e8bd19ea7 100644
--- a/tests/kernel-cases/import/skipped-4161.json
+++ b/tests/kernel-cases/import/skipped-4161.json
@@ -126,5 +126,21 @@
{
"source": "tangency-labs/solidcraft#5091",
"why": "no geometry: KiCad board import (feature request)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5202",
+ "why": "UI only: the history marker on a hidden sketch"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5210",
+ "why": "render: web import paths that don't draw STEP bodies"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5293",
+ "why": "no geometry: Convert Mesh takes constant-section prisms only, as designed (dup of #358)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5321",
+ "why": "no kernel geometry: two DXF writers (file export)"
}
]
diff --git a/tests/kernel-cases/sheet-metal/5306-flange-on-notch-edge-not-outer-edge/expected.json b/tests/kernel-cases/sheet-metal/5306-flange-on-notch-edge-not-outer-edge/expected.json
new file mode 100644
index 0000000000..c68d09900b
--- /dev/null
+++ b/tests/kernel-cases/sheet-metal/5306-flange-on-notch-edge-not-outer-edge/expected.json
@@ -0,0 +1,17 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5306"
+ ],
+ "what": "a 90 deg flange on the edge inside an open rectangular notch of a sheet-metal plate (100x60, notch 20 wide, 15 deep from the far edge): the flange was built on the plate's outer edge instead",
+ "source": "analytic",
+ "method": "T 2, R 2, K 0.5, inside flange on the notch's bottom edge (y = 45, x 40..60): the plate (less the notch) is set back 4 under it; a quarter-annulus bend (r 2..4, axis at y 41, z 4: centroid 41 + (56/3)/(3 pi), 4 - (56/3)/(3 pi)) and a 16 mm leg (y 43..45, z 4..20). The centre of mass is graded (to 0.5 mm, room for the corner reliefs the rule may add): a flange on an outer edge moves it by many millimetres",
+ "body_count": 1,
+ "center_of_mass": [
+ 50.0,
+ 29.6542,
+ 1.5993
+ ],
+ "tolerance": {
+ "abs_mm": 0.5
+ }
+}
diff --git a/tests/kernel-cases/sheet-metal/5306-flange-on-notch-edge-not-outer-edge/recipe.json b/tests/kernel-cases/sheet-metal/5306-flange-on-notch-edge-not-outer-edge/recipe.json
new file mode 100644
index 0000000000..e9e6c4bccc
--- /dev/null
+++ b/tests/kernel-cases/sheet-metal/5306-flange-on-notch-edge-not-outer-edge/recipe.json
@@ -0,0 +1,95 @@
+{
+ "commands": [
+ {
+ "command": "sheet.manage_rules",
+ "params": {
+ "name": "Rule",
+ "thickness": "2 mm",
+ "active": true,
+ "bend_radius": "2 mm",
+ "k_factor": 0.5
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY",
+ "name": "Plate"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 0,
+ 0
+ ],
+ "p1": [
+ 100,
+ 60
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sheet.flange",
+ "params": {
+ "type": "base",
+ "sketch": "Plate"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY",
+ "name": "Notch",
+ "project_edges": false
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 40,
+ 45
+ ],
+ "p1": [
+ 60,
+ 65
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "sketch": "Notch",
+ "through_all": true,
+ "direction": "symmetric",
+ "operation": "cut"
+ }
+ },
+ {
+ "command": "sheet.flange",
+ "params": {
+ "type": "edge",
+ "edges": [
+ [
+ 50,
+ 45,
+ 2
+ ]
+ ],
+ "height": 20,
+ "angle": 90,
+ "position": "inside"
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/sheet-metal/skipped-4161.json b/tests/kernel-cases/sheet-metal/skipped-4161.json
index 6c5fd1c168..5d652b0c10 100644
--- a/tests/kernel-cases/sheet-metal/skipped-4161.json
+++ b/tests/kernel-cases/sheet-metal/skipped-4161.json
@@ -34,5 +34,9 @@
{
"source": "tangency-labs/solidcraft#4968",
"why": "no geometry: included bend angles in sheet-metal exports (feature request)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5269",
+ "why": "no kernel geometry: flat-pattern DXF export clamps a degree-9 Bezier (file export)"
}
]
diff --git a/tests/kernel-cases/shell/5326-thicken-l-sheet-into-its-inside-corner/expected.json b/tests/kernel-cases/shell/5326-thicken-l-sheet-into-its-inside-corner/expected.json
new file mode 100644
index 0000000000..d0a4b5f37e
--- /dev/null
+++ b/tests/kernel-cases/shell/5326-thicken-l-sheet-into-its-inside-corner/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5326"
+ ],
+ "what": "an open sheet of two planar walls at a right angle (30 and 20 mm, 20 deep) thickened 2 mm toward the inside of its corner: truck refused it ('thickening into an inside corner across a sharp edge'); the outside worked",
+ "source": "analytic",
+ "method": "-2 is the inside of the corner (the side truck refused; +2, the outside, worked). Each wall offset 2 mm toward the other; the two slabs overlap in a 2x2 square: V = (30*2 + 20*2 - 2*2)*20 = 1920; faces 8 (an L-shaped prism). The sheet itself is removed afterwards, so only the new solid is graded",
+ "body_count": 1,
+ "faces": 8,
+ "volume_mm3": 1920.0
+}
diff --git a/tests/kernel-cases/shell/5326-thicken-l-sheet-into-its-inside-corner/recipe.json b/tests/kernel-cases/shell/5326-thicken-l-sheet-into-its-inside-corner/recipe.json
new file mode 100644
index 0000000000..941031c849
--- /dev/null
+++ b/tests/kernel-cases/shell/5326-thicken-l-sheet-into-its-inside-corner/recipe.json
@@ -0,0 +1,79 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "S"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 30,
+ 0
+ ],
+ [
+ 30,
+ 20
+ ]
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "surface.extrude",
+ "params": {
+ "sketch": "S",
+ "curves": [
+ "l1",
+ "l2"
+ ],
+ "distance": 20
+ }
+ },
+ {
+ "command": "surface.thicken",
+ "params": {
+ "bodies": [
+ "Body1"
+ ],
+ "thickness": -2,
+ "operation": "new"
+ }
+ },
+ {
+ "command": "solid.remove",
+ "params": {
+ "bodies": [
+ "Body1"
+ ]
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/shell/5368-delete-rounds-of-block-top-edges/expected.json b/tests/kernel-cases/shell/5368-delete-rounds-of-block-top-edges/expected.json
new file mode 100644
index 0000000000..037f9f6ddf
--- /dev/null
+++ b/tests/kernel-cases/shell/5368-delete-rounds-of-block-top-edges/expected.json
@@ -0,0 +1,12 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5368",
+ "tangency-labs/solidcraft#5182"
+ ],
+ "what": "the four rounds of a block's top edges (r2, sharp vertical edges) deleted, so the planar top and sides extend to close the gap: refused ('only planar neighbours can extend to close the gap yet')",
+ "source": "analytic",
+ "method": "every neighbour of the rounds is planar; deleting them restores the sharp block: V = 35*25*25 = 21875, 6 faces. The points are the rounds' mid-points at 45 deg",
+ "body_count": 1,
+ "faces": 6,
+ "volume_mm3": 21875.0
+}
diff --git a/tests/kernel-cases/shell/5368-delete-rounds-of-block-top-edges/recipe.json b/tests/kernel-cases/shell/5368-delete-rounds-of-block-top-edges/recipe.json
new file mode 100644
index 0000000000..709958a7a4
--- /dev/null
+++ b/tests/kernel-cases/shell/5368-delete-rounds-of-block-top-edges/recipe.json
@@ -0,0 +1,73 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ 0,
+ 0,
+ 0
+ ],
+ "length": 35,
+ "width": 25,
+ "height": 25,
+ "body_name": "Block"
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 17.5,
+ 0,
+ 25
+ ],
+ [
+ 17.5,
+ 25,
+ 25
+ ],
+ [
+ 0,
+ 12.5,
+ 25
+ ],
+ [
+ 35,
+ 12.5,
+ 25
+ ]
+ ],
+ "radius": 2
+ }
+ },
+ {
+ "command": "face.delete",
+ "params": {
+ "faces": [
+ [
+ 17.5,
+ 0.5857864376269051,
+ 24.414213562373096
+ ],
+ [
+ 17.5,
+ 24.414213562373096,
+ 24.414213562373096
+ ],
+ [
+ 0.5857864376269051,
+ 12.5,
+ 24.414213562373096
+ ],
+ [
+ 34.41421356237309,
+ 12.5,
+ 24.414213562373096
+ ]
+ ]
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/shell/skipped-4161.json b/tests/kernel-cases/shell/skipped-4161.json
index e1aa44b30f..7fae8216fe 100644
--- a/tests/kernel-cases/shell/skipped-4161.json
+++ b/tests/kernel-cases/shell/skipped-4161.json
@@ -110,5 +110,33 @@
{
"source": "tangency-labs/solidcraft#5076",
"why": "no reproduction: shell of a user's loft (free-form, a stated limit); see the loft shell case from #4743"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5245",
+ "why": "render: cursor offset on old Intel OpenGL (dup of #2063)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5247",
+ "why": "no reproduction: \"shell worked fine in previous versions\", no message or design"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5249",
+ "why": "no reproduction: a shell refused on a box with a sketched circle, screenshots only (it worked in an earlier version)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5301",
+ "why": "no geometry: a sketch offset circle not fully constrained (sketch)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5330",
+ "why": "no geometry: sketch offset of an offset spline (sketch curve fitting)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5339",
+ "why": "no geometry: a spline's offset is fitted from many points (sketch curve fitting, dup of #5330)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5378",
+ "why": "no reproduction: Thicken fails, no message or design"
}
]
diff --git a/tests/kernel-cases/sources.json b/tests/kernel-cases/sources.json
index ad4992726b..66b8e2df91 100644
--- a/tests/kernel-cases/sources.json
+++ b/tests/kernel-cases/sources.json
@@ -2010,5 +2010,119 @@
"5192": "issue, open",
"5193": "issue, open",
"5195": "issue, open",
- "5197": "issue, open"
+ "5197": "issue, open",
+ "5198": "issue, open",
+ "5199": "issue, open",
+ "5201": "issue, open",
+ "5202": "issue, closed",
+ "5209": "issue, open",
+ "5210": "issue, open",
+ "5211": "issue, open",
+ "5222": "issue, open",
+ "5225": "issue, open",
+ "5226": "issue, open",
+ "5227": "issue, closed",
+ "5229": "issue, closed",
+ "5231": "issue, open",
+ "5234": "issue, open",
+ "5236": "issue, open",
+ "5238": "issue, open",
+ "5239": "issue, open",
+ "5243": "issue, closed",
+ "5245": "issue, open",
+ "5247": "issue, open",
+ "5248": "issue, closed",
+ "5249": "issue, open",
+ "5251": "issue, open",
+ "5263": "issue, closed",
+ "5266": "issue, open",
+ "5269": "issue, closed",
+ "5274": "issue, open",
+ "5276": "issue, open",
+ "5277": "issue, open",
+ "5278": "issue, open",
+ "5280": "issue, closed",
+ "5282": "issue, open",
+ "5283": "issue, open",
+ "5284": "issue, open",
+ "5285": "issue, open",
+ "5288": "issue, closed",
+ "5289": "issue, open",
+ "5291": "issue, open",
+ "5293": "issue, open",
+ "5295": "issue, open",
+ "5297": "issue, open",
+ "5299": "issue, open",
+ "5300": "issue, open",
+ "5301": "issue, open",
+ "5302": "issue, closed",
+ "5304": "issue, closed",
+ "5305": "issue, open",
+ "5306": "issue, open",
+ "5313": "issue, open",
+ "5314": "issue, closed",
+ "5317": "issue, open",
+ "5321": "issue, open",
+ "5322": "issue, open",
+ "5323": "issue, open",
+ "5324": "issue, open",
+ "5325": "issue, open",
+ "5326": "issue, open",
+ "5327": "issue, open",
+ "5328": "issue, open",
+ "5330": "issue, open",
+ "5336": "issue, closed",
+ "5339": "issue, open",
+ "5344": "issue, open",
+ "5348": "issue, open",
+ "5351": "issue, open",
+ "5353": "issue, open",
+ "5358": "issue, open",
+ "5359": "issue, open",
+ "5360": "issue, open",
+ "5361": "issue, closed",
+ "5368": "issue, open",
+ "5369": "issue, closed",
+ "5372": "issue, closed",
+ "5374": "issue, closed",
+ "5378": "issue, open",
+ "5382": "issue, open",
+ "5383": "issue, closed",
+ "5384": "issue, open",
+ "5385": "issue, closed",
+ "5386": "issue, closed",
+ "5390": "issue, closed",
+ "5392": "issue, open",
+ "5394": "issue, open",
+ "5395": "issue, open",
+ "5396": "issue, closed",
+ "5399": "issue, open",
+ "5400": "issue, open",
+ "5401": "issue, open",
+ "5402": "issue, open",
+ "5403": "issue, open",
+ "5405": "issue, open",
+ "5407": "issue, closed",
+ "5408": "issue, open",
+ "5410": "issue, open",
+ "5411": "issue, open",
+ "5413": "issue, open",
+ "5414": "issue, open",
+ "5417": "issue, open",
+ "5418": "issue, open",
+ "5419": "issue, open",
+ "5421": "issue, open",
+ "5429": "issue, open",
+ "5431": "issue, open",
+ "5433": "issue, open",
+ "5434": "issue, open",
+ "5437": "issue, closed",
+ "5438": "issue, closed",
+ "5447": "issue, closed",
+ "5448": "issue, closed",
+ "5452": "issue, open",
+ "5457": "issue, closed",
+ "5458": "issue, open",
+ "5460": "issue, open",
+ "5462": "issue, open"
}
diff --git a/tests/kernel-cases/sweeps/5323-sweep-circle-along-polyline-turning-in-two-planes/expected.json b/tests/kernel-cases/sweeps/5323-sweep-circle-along-polyline-turning-in-two-planes/expected.json
new file mode 100644
index 0000000000..4444158cc1
--- /dev/null
+++ b/tests/kernel-cases/sweeps/5323-sweep-circle-along-polyline-turning-in-two-planes/expected.json
@@ -0,0 +1,10 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5323"
+ ],
+ "what": "a circle r5 swept along a 3D polyline (30, 25, 20 mm) whose two corners turn in different planes: truck's solid was 0.64% short (5852.75 for 5890.49), with no warning",
+ "source": "analytic",
+ "method": "the section is symmetric about the path, so each mitred corner adds outside the wedge it removes inside: V = pi*5^2*(30+25+20) = 5890.486",
+ "body_count": 1,
+ "volume_mm3": 5890.4862
+}
diff --git a/tests/kernel-cases/sweeps/5323-sweep-circle-along-polyline-turning-in-two-planes/recipe.json b/tests/kernel-cases/sweeps/5323-sweep-circle-along-polyline-turning-in-two-planes/recipe.json
new file mode 100644
index 0000000000..e135023708
--- /dev/null
+++ b/tests/kernel-cases/sweeps/5323-sweep-circle-along-polyline-turning-in-two-planes/recipe.json
@@ -0,0 +1,123 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "P"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 5
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY",
+ "name": "Q"
+ }
+ },
+ {
+ "command": "sketch.options",
+ "params": {
+ "sketch": "Q",
+ "sketch_3d": true
+ }
+ },
+ {
+ "command": "sketch.line3d",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0,
+ 0
+ ],
+ [
+ 0,
+ 0,
+ -30
+ ]
+ ]
+ }
+ },
+ {
+ "command": "sketch.line3d",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0,
+ -30
+ ],
+ [
+ 25,
+ 0,
+ -30
+ ]
+ ]
+ }
+ },
+ {
+ "command": "sketch.line3d",
+ "params": {
+ "points": [
+ [
+ 25,
+ 0,
+ -30
+ ],
+ [
+ 25,
+ 20,
+ -30
+ ]
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "P",
+ "path_sketch": "Q",
+ "path": [
+ "w1",
+ "w2",
+ "w3"
+ ],
+ "operation": "new"
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/sweeps/5324-sweep-square-round-closed-path-from-mid-edge/expected.json b/tests/kernel-cases/sweeps/5324-sweep-square-round-closed-path-from-mid-edge/expected.json
new file mode 100644
index 0000000000..a27aa4c225
--- /dev/null
+++ b/tests/kernel-cases/sweeps/5324-sweep-square-round-closed-path-from-mid-edge/expected.json
@@ -0,0 +1,22 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5324"
+ ],
+ "what": "a 4x4 square, standing on the middle of the bottom edge of a closed 60x40 rectangle path, swept round the whole path (drawn from a corner): truck's solid was 59% too small and offset, with no error",
+ "source": "analytic",
+ "method": "the section is centred on the path, so each mitre adds and removes equal wedges: V = 4*4*200 = 3200. The ring's outer box is the path's grown by 2: x -32..32, y -22..22, z -2..2",
+ "body_count": 1,
+ "volume_mm3": 3200.0,
+ "bbox": {
+ "min": [
+ -32.0,
+ -22.0,
+ -2.0
+ ],
+ "max": [
+ 32.0,
+ 22.0,
+ 2.0
+ ]
+ }
+}
diff --git a/tests/kernel-cases/sweeps/5324-sweep-square-round-closed-path-from-mid-edge/recipe.json b/tests/kernel-cases/sweeps/5324-sweep-square-round-closed-path-from-mid-edge/recipe.json
new file mode 100644
index 0000000000..3df41df8fa
--- /dev/null
+++ b/tests/kernel-cases/sweeps/5324-sweep-square-round-closed-path-from-mid-edge/recipe.json
@@ -0,0 +1,109 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ -20,
+ 0
+ ],
+ "x_dir": [
+ 0,
+ 1,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "P"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ -2,
+ -2
+ ],
+ "p1": [
+ 2,
+ 2
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Q"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -30,
+ -20
+ ],
+ [
+ 30,
+ -20
+ ],
+ [
+ 30,
+ 20
+ ],
+ [
+ -30,
+ 20
+ ]
+ ],
+ "closed": true
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "P",
+ "path_sketch": "Q",
+ "path": [
+ "l1",
+ "l2",
+ "l3",
+ "l4"
+ ],
+ "operation": "new"
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/sweeps/5325-sweep-cut-along-quarter-arc-from-face/expected.json b/tests/kernel-cases/sweeps/5325-sweep-cut-along-quarter-arc-from-face/expected.json
new file mode 100644
index 0000000000..e2cec6ecbe
--- /dev/null
+++ b/tests/kernel-cases/sweeps/5325-sweep-cut-along-quarter-arc-from-face/expected.json
@@ -0,0 +1,13 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#5325"
+ ],
+ "what": "a sweep cut of a circle r5 on a 50x50x45 block's bottom face along a quarter arc r20 that leaves the face square to it and bends into the block: truck closed the entry hole with a disc and left a void shell behind it",
+ "source": "analytic",
+ "method": "the tube's centre line has length 10 pi: V = 50*50*45 - 25 pi * 10 pi = 110032.599. Faces: the six block faces (the bottom with the entry hole), the tube wall and its end disc inside the block = 8; one shell. Area = 14000 - 25 pi + 2 pi 5 * 10 pi + 25 pi = 14986.960",
+ "body_count": 1,
+ "shells": 1,
+ "faces": 8,
+ "volume_mm3": 110032.5989,
+ "area_mm2": 14986.9604
+}
diff --git a/tests/kernel-cases/sweeps/5325-sweep-cut-along-quarter-arc-from-face/recipe.json b/tests/kernel-cases/sweeps/5325-sweep-cut-along-quarter-arc-from-face/recipe.json
new file mode 100644
index 0000000000..3967d9a5aa
--- /dev/null
+++ b/tests/kernel-cases/sweeps/5325-sweep-cut-along-quarter-arc-from-face/recipe.json
@@ -0,0 +1,143 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "B"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 25,
+ 25
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 45,
+ "operation": "new"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "P"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 5
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 0
+ ],
+ "x_dir": [
+ 0,
+ 0,
+ 1
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Q"
+ }
+ },
+ {
+ "command": "sketch.arc.three_point",
+ "params": {
+ "start": [
+ 0,
+ 0
+ ],
+ "end": [
+ 20,
+ 20
+ ],
+ "through": [
+ 14.142135623730951,
+ 5.857864376269049
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "P",
+ "path_sketch": "Q",
+ "path": [
+ "a1"
+ ],
+ "operation": "cut"
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/sweeps/skipped-4161.json b/tests/kernel-cases/sweeps/skipped-4161.json
index cf6a8761c1..1213b93f93 100644
--- a/tests/kernel-cases/sweeps/skipped-4161.json
+++ b/tests/kernel-cases/sweeps/skipped-4161.json
@@ -162,5 +162,25 @@
{
"source": "tangency-labs/solidcraft#5192",
"why": "no geometry: \"unknown sketch line\" for the axis (command parameters), no design"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5209",
+ "why": "no kernel geometry: surface extrude takes the curve of the same id from another sketch (selection, dup of #4057)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5283",
+ "why": "no single right answer: where a loft from a polygon to an ellipse splits its side faces is the method's choice"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5317",
+ "why": "duplicate of #4689: a revolve profile with an edge on the axis splits its flat face into sectors"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5410",
+ "why": "no geometry: a sketch can't attach to a face whose history is ambiguous (document, dup of #4325)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5419",
+ "why": "no reproduction: a loft from two circles to one user contour (a mismatched loop count), black viewport, no design"
}
]
diff --git a/tests/kernel-cases/threads/skipped-4161.json b/tests/kernel-cases/threads/skipped-4161.json
index e92dcc657a..592a8170a4 100644
--- a/tests/kernel-cases/threads/skipped-4161.json
+++ b/tests/kernel-cases/threads/skipped-4161.json
@@ -74,5 +74,29 @@
{
"source": "tangency-labs/solidcraft#5055",
"why": "no geometry: no coarse thread past M56 (designation; M75x2 works)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5238",
+ "why": "duplicate of threads/3311-two-tapped-holes-both-modelled-threaded: a second modelled thread on the same body"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5277",
+ "why": "no reproduction: a slow modelled M8x1 thread on an unknown large part, no design"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5282",
+ "why": "no geometry: a 20 mm hole is refused for a modelled M20 by design (drill 17.5)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5382",
+ "why": "duplicate of threads/3311-two-tapped-holes-both-modelled-threaded: a second modelled M8 thread on the same body"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5384",
+ "why": "duplicate of threads/3311-two-tapped-holes-both-modelled-threaded (and #5382)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#5417",
+ "why": "no reproduction: \"tree too deep\" on an M12x1.5 modelled thread in an unknown hole (dup of #2892)"
}
]