SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 494/509: Kernel rig: a junction family: oblique wedges 30 to 150 degrees rounded and chamfered (exact), bosses upright and tilted, pipe tees and a Y junction
jyviko3b31dc77d8c4
diff --git a/tests/kernel-cases/fillets/KNOWN_FAILING b/tests/kernel-cases/fillets/KNOWN_FAILINGindex 1c1cd2903b..41e80e66de 100644--- a/tests/kernel-cases/fillets/KNOWN_FAILING+++ b/tests/kernel-cases/fillets/KNOWN_FAILING@@ -21,6 +21,10 @@ cov-fillet-g2-pocket-corner the G2 corner patch meets the new order-2 section'scov-fillet-turn-swept-boss-base-r1 not supported yet: solid.fillet has no `turn`; the corners are mitred (12508.9676, the Mitre case's volume)cov-fillet-turn-swept-pocket-sharp-corner-refused-r1 not supported yet: solid.fillet has no `turn`, so the sharp concave corners are mitred, not refusedcov-fillet-variable-box-edge-1-to-5-on-its-cone the variable round's sections are the balls' great circles, not the circles their envelope touches them along: volume 11955.6466 against 11956.2224 (rel 4.8e-5)+cov-junction-boss-tilt-20-root-round SMLib fillet status 1001 on a cylinder tilted 20 degrees into the plate (also before the blend rework)+cov-junction-boss-tilt-40-root-round SMLib fillet status 1001 on a cylinder tilted 40 degrees into the plate (also before the blend rework)+cov-junction-tee-equal-round equal pipes' intersection is two plane ellipses crossing: their exact conic-pair rounds meet at the crossings in a corner the old corner code cannot join (built by the traced rounds before smlib#77); the corner step+cov-junction-y-junction-120-round refused: the faces between the three intersection curves narrow to nothing at the two triple points, so the room check trips; a three-edge concave corner (the corner step)report-drafted-peg-front-and-concave-rounds-together-r2 not supported yet: SMLib refuses the corner where the drafted front top edge runs tangent into the concave arc (on the cone) as of no kind its blend corners takereport-fillet-concave-arc-and-front-top-edge-together-r5-solver-residues the corner patch where the convex and concave rounds meet stands 0.128 out of the front face (box y min -0.0699 against 0.0579)report-fillet-concave-arc-and-front-top-edge-together-r7-solver-residues the corner patch where the convex and concave rounds meet stands 0.230 out of the front face (box y min -0.1723 against 0.0579)diff --git a/tests/kernel-cases/fillets/cov-junction-boss-tilt-00-root-round/expected.json b/tests/kernel-cases/fillets/cov-junction-boss-tilt-00-root-round/expected.jsonnew file mode 100644index 0000000000..3348c8e9a5--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-boss-tilt-00-root-round/expected.json@@ -0,0 +1,10 @@+{+ "sources": [],+ "what": "cylinder R6 tilted 0 degrees joined into a plate, its root edge rounded 1.5",+ "source": "invariants",+ "method": "no closed form for the round on these quadrics' intersection: one valid closed body whose round meets its faces G1",+ "body_count": 1,+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-boss-tilt-00-root-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-boss-tilt-00-root-round/recipe.jsonnew file mode 100644index 0000000000..53edfc4128--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-boss-tilt-00-root-round/recipe.json@@ -0,0 +1,52 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 60,+ "width": 60,+ "height": 10,+ "corner": [+ -30,+ -30,+ -10+ ],+ "body_name": "P"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 6,+ "height": 25,+ "base": [+ -0.0,+ 0,+ -2.0+ ],+ "axis": [+ 0.0,+ 0,+ 1.0+ ],+ "operation": "join",+ "targets": [+ "P"+ ]+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 6,+ 0+ ]+ ],+ "radius": 1.5+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-boss-tilt-20-root-round/expected.json b/tests/kernel-cases/fillets/cov-junction-boss-tilt-20-root-round/expected.jsonnew file mode 100644index 0000000000..048aad5f43--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-boss-tilt-20-root-round/expected.json@@ -0,0 +1,10 @@+{+ "sources": [],+ "what": "cylinder R6 tilted 20 degrees joined into a plate, its root edge rounded 1.5",+ "source": "invariants",+ "method": "no closed form for the round on these quadrics' intersection: one valid closed body whose round meets its faces G1",+ "body_count": 1,+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-boss-tilt-20-root-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-boss-tilt-20-root-round/recipe.jsonnew file mode 100644index 0000000000..b52b1e3b0c--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-boss-tilt-20-root-round/recipe.json@@ -0,0 +1,52 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 60,+ "width": 60,+ "height": 10,+ "corner": [+ -30,+ -30,+ -10+ ],+ "body_name": "P"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 6,+ "height": 25,+ "base": [+ -0.6840402866513374,+ 0,+ -1.8793852415718169+ ],+ "axis": [+ 0.3420201433256687,+ 0,+ 0.9396926207859084+ ],+ "operation": "join",+ "targets": [+ "P"+ ]+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 6,+ 0+ ]+ ],+ "radius": 1.5+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-boss-tilt-40-root-round/expected.json b/tests/kernel-cases/fillets/cov-junction-boss-tilt-40-root-round/expected.jsonnew file mode 100644index 0000000000..979fc55558--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-boss-tilt-40-root-round/expected.json@@ -0,0 +1,10 @@+{+ "sources": [],+ "what": "cylinder R6 tilted 40 degrees joined into a plate, its root edge rounded 1.5",+ "source": "invariants",+ "method": "no closed form for the round on these quadrics' intersection: one valid closed body whose round meets its faces G1",+ "body_count": 1,+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-boss-tilt-40-root-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-boss-tilt-40-root-round/recipe.jsonnew file mode 100644index 0000000000..a99290fd90--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-boss-tilt-40-root-round/recipe.json@@ -0,0 +1,52 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 60,+ "width": 60,+ "height": 10,+ "corner": [+ -30,+ -30,+ -10+ ],+ "body_name": "P"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 6,+ "height": 25,+ "base": [+ -1.2855752193730785,+ 0,+ -1.532088886237956+ ],+ "axis": [+ 0.6427876096865393,+ 0,+ 0.766044443118978+ ],+ "operation": "join",+ "targets": [+ "P"+ ]+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 6,+ 0+ ]+ ],+ "radius": 1.5+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-tee-equal-round/expected.json b/tests/kernel-cases/fillets/cov-junction-tee-equal-round/expected.jsonnew file mode 100644index 0000000000..ee5316bd55--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-tee-equal-round/expected.json@@ -0,0 +1,10 @@+{+ "sources": [],+ "what": "equal pipes R8 tee, rounded 1",+ "source": "invariants",+ "method": "no closed form for the round on these quadrics' intersection: one valid closed body whose round meets its faces G1",+ "body_count": 1,+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-tee-equal-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-tee-equal-round/recipe.jsonnew file mode 100644index 0000000000..a105a8236a--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-tee-equal-round/recipe.json@@ -0,0 +1,56 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 8,+ "height": 60,+ "base": [+ -30,+ 0,+ 0+ ],+ "axis": [+ 1,+ 0,+ 0+ ],+ "body_name": "M"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 8,+ "height": 25,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": [+ 0,+ 0,+ 1+ ],+ "operation": "join",+ "targets": [+ "M"+ ]+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 7.642691913004848,+ 2.3641616532907164,+ 7.642691913004848+ ]+ ],+ "radius": 1+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-tee-oblique-round/expected.json b/tests/kernel-cases/fillets/cov-junction-tee-oblique-round/expected.jsonnew file mode 100644index 0000000000..49d7b052d6--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-tee-oblique-round/expected.json@@ -0,0 +1,10 @@+{+ "sources": [],+ "what": "pipe tee oblique: main R8, branch R5 offset 0 tilted 30, intersection rounded 1",+ "source": "invariants",+ "method": "no closed form for the round on these quadrics' intersection: one valid closed body whose round meets its faces G1",+ "body_count": 1,+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-tee-oblique-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-tee-oblique-round/recipe.jsonnew file mode 100644index 0000000000..8df10f9e6d--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-tee-oblique-round/recipe.json@@ -0,0 +1,56 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 8,+ "height": 60,+ "base": [+ -30,+ 0,+ 0+ ],+ "axis": [+ 1,+ 0,+ 0+ ],+ "body_name": "M"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 5,+ "height": 25,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": [+ 0.49999999999999994,+ 0,+ 0.8660254037844387+ ],+ "operation": "join",+ "targets": [+ "M"+ ]+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 3.6055512754639882,+ 5,+ 6.244997998398398+ ]+ ],+ "radius": 1+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-tee-oblique-unequal-round/expected.json b/tests/kernel-cases/fillets/cov-junction-tee-oblique-unequal-round/expected.jsonnew file mode 100644index 0000000000..63ef5dbdf2--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-tee-oblique-unequal-round/expected.json@@ -0,0 +1,10 @@+{+ "sources": [],+ "what": "pipe tee oblique-unequal: main R8, branch R4 offset 1 tilted 45, intersection rounded 1",+ "source": "invariants",+ "method": "no closed form for the round on these quadrics' intersection: one valid closed body whose round meets its faces G1",+ "body_count": 1,+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-tee-oblique-unequal-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-tee-oblique-unequal-round/recipe.jsonnew file mode 100644index 0000000000..b538ae0eba--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-tee-oblique-unequal-round/recipe.json@@ -0,0 +1,56 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 8,+ "height": 60,+ "base": [+ -30,+ 0,+ 0+ ],+ "axis": [+ 1,+ 0,+ 0+ ],+ "body_name": "M"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 4,+ "height": 25,+ "base": [+ 0,+ 1,+ 0+ ],+ "axis": [+ 0.7071067811865475,+ 0,+ 0.7071067811865476+ ],+ "operation": "join",+ "targets": [+ "M"+ ]+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 6.244997998398397,+ 5,+ 6.244997998398398+ ]+ ],+ "radius": 1+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-tee-offset-round/expected.json b/tests/kernel-cases/fillets/cov-junction-tee-offset-round/expected.jsonnew file mode 100644index 0000000000..824520b925--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-tee-offset-round/expected.json@@ -0,0 +1,10 @@+{+ "sources": [],+ "what": "pipe tee offset: main R8, branch R5 offset 2 tilted 0, intersection rounded 1",+ "source": "invariants",+ "method": "no closed form for the round on these quadrics' intersection: one valid closed body whose round meets its faces G1",+ "body_count": 1,+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-tee-offset-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-tee-offset-round/recipe.jsonnew file mode 100644index 0000000000..59d97d3358--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-tee-offset-round/recipe.json@@ -0,0 +1,56 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 8,+ "height": 60,+ "base": [+ -30,+ 0,+ 0+ ],+ "axis": [+ 1,+ 0,+ 0+ ],+ "body_name": "M"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 5,+ "height": 25,+ "base": [+ 0,+ 2,+ 0+ ],+ "axis": [+ 0.0,+ 0,+ 1.0+ ],+ "operation": "join",+ "targets": [+ "M"+ ]+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0.0,+ 7,+ 3.872983346207417+ ]+ ],+ "radius": 1+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-tee-unequal-round/expected.json b/tests/kernel-cases/fillets/cov-junction-tee-unequal-round/expected.jsonnew file mode 100644index 0000000000..d7dd9a1fc1--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-tee-unequal-round/expected.json@@ -0,0 +1,10 @@+{+ "sources": [],+ "what": "pipe tee unequal: main R8, branch R5 offset 0 tilted 0, intersection rounded 1",+ "source": "invariants",+ "method": "no closed form for the round on these quadrics' intersection: one valid closed body whose round meets its faces G1",+ "body_count": 1,+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-tee-unequal-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-tee-unequal-round/recipe.jsonnew file mode 100644index 0000000000..cf7cfceed6--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-tee-unequal-round/recipe.json@@ -0,0 +1,56 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 8,+ "height": 60,+ "base": [+ -30,+ 0,+ 0+ ],+ "axis": [+ 1,+ 0,+ 0+ ],+ "body_name": "M"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 5,+ "height": 25,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": [+ 0.0,+ 0,+ 1.0+ ],+ "operation": "join",+ "targets": [+ "M"+ ]+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0.0,+ 5,+ 6.244997998398398+ ]+ ],+ "radius": 1+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-030-chamfer/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-030-chamfer/expected.jsonnew file mode 100644index 0000000000..8812d2d3bc--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-030-chamfer/expected.json@@ -0,0 +1,11 @@+{+ "sources": [],+ "what": "prism over a 30 degree triangle, apex edge chamfer 2",+ "source": "analytic",+ "method": "prism over a triangle with a 30 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge chamfered 2 along each face removes the triangle (1/2) 2^2 sin(a) along 30. V = 2970.000000000",+ "body_count": 1,+ "volume_mm3": 2969.9999999999995,+ "tolerance": {+ "rel": 1e-06+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-030-chamfer/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-030-chamfer/recipe.jsonnew file mode 100644index 0000000000..c2611535b5--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-030-chamfer/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 19.318516525781366,+ -5.176380902050415+ ],+ [+ 19.318516525781366,+ 5.176380902050415+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "distance": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-030-round/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-030-round/expected.jsonnew file mode 100644index 0000000000..4e3333319a--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-030-round/expected.json@@ -0,0 +1,14 @@+{+ "sources": [],+ "what": "prism over a 30 degree triangle, apex edge round 2",+ "source": "analytic",+ "method": "prism over a triangle with a 30 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge rounded r 2 removes r^2 (cot(a/2) - (pi - a)/2) along 30. V = 2709.233535771",+ "body_count": 1,+ "volume_mm3": 2709.233535771224,+ "tolerance": {+ "rel": 1e-06+ },+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-030-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-030-round/recipe.jsonnew file mode 100644index 0000000000..70db547108--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-030-round/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 19.318516525781366,+ -5.176380902050415+ ],+ [+ 19.318516525781366,+ 5.176380902050415+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "radius": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-045-chamfer/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-045-chamfer/expected.jsonnew file mode 100644index 0000000000..a53bf37481--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-045-chamfer/expected.json@@ -0,0 +1,11 @@+{+ "sources": [],+ "what": "prism over a 45 degree triangle, apex edge chamfer 2",+ "source": "analytic",+ "method": "prism over a triangle with a 45 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge chamfered 2 along each face removes the triangle (1/2) 2^2 sin(a) along 30. V = 4200.214280248",+ "body_count": 1,+ "volume_mm3": 4200.214280248092,+ "tolerance": {+ "rel": 1e-06+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-045-chamfer/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-045-chamfer/recipe.jsonnew file mode 100644index 0000000000..2635425166--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-045-chamfer/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 18.477590650225736,+ -7.653668647301796+ ],+ [+ 18.477590650225736,+ 7.653668647301796+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "distance": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-045-round/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-045-round/expected.jsonnew file mode 100644index 0000000000..0e7769e6d9--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-045-round/expected.json@@ -0,0 +1,14 @@+{+ "sources": [],+ "what": "prism over a 45 degree triangle, apex edge round 2",+ "source": "analytic",+ "method": "prism over a triangle with a 45 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge rounded r 2 removes r^2 (cot(a/2) - (pi - a)/2) along 30. V = 4094.306729046",+ "body_count": 1,+ "volume_mm3": 4094.306729046054,+ "tolerance": {+ "rel": 1e-06+ },+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-045-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-045-round/recipe.jsonnew file mode 100644index 0000000000..f90ee13076--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-045-round/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 18.477590650225736,+ -7.653668647301796+ ],+ [+ 18.477590650225736,+ 7.653668647301796+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "radius": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-060-chamfer/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-060-chamfer/expected.jsonnew file mode 100644index 0000000000..e1c8ff6c8c--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-060-chamfer/expected.json@@ -0,0 +1,11 @@+{+ "sources": [],+ "what": "prism over a 60 degree triangle, apex edge chamfer 2",+ "source": "analytic",+ "method": "prism over a triangle with a 60 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge chamfered 2 along each face removes the triangle (1/2) 2^2 sin(a) along 30. V = 5144.190898480",+ "body_count": 1,+ "volume_mm3": 5144.1908984795655,+ "tolerance": {+ "rel": 1e-06+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-060-chamfer/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-060-chamfer/recipe.jsonnew file mode 100644index 0000000000..62fd8ac64f--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-060-chamfer/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 17.320508075688775,+ -9.999999999999998+ ],+ [+ 17.320508075688775,+ 9.999999999999998+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "distance": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-060-round/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-060-round/expected.jsonnew file mode 100644index 0000000000..d70ff3a74d--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-060-round/expected.json@@ -0,0 +1,14 @@+{+ "sources": [],+ "what": "prism over a 60 degree triangle, apex edge round 2",+ "source": "analytic",+ "method": "prism over a triangle with a 60 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge rounded r 2 removes r^2 (cot(a/2) - (pi - a)/2) along 30. V = 5113.970031942",+ "body_count": 1,+ "volume_mm3": 5113.970031941958,+ "tolerance": {+ "rel": 1e-06+ },+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-060-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-060-round/recipe.jsonnew file mode 100644index 0000000000..302a119100--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-060-round/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 17.320508075688775,+ -9.999999999999998+ ],+ [+ 17.320508075688775,+ 9.999999999999998+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "radius": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-075-chamfer/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-075-chamfer/expected.jsonnew file mode 100644index 0000000000..45cb98053d--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-075-chamfer/expected.json@@ -0,0 +1,11 @@+{+ "sources": [],+ "what": "prism over a 75 degree triangle, apex edge chamfer 2",+ "source": "analytic",+ "method": "prism over a triangle with a 75 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge chamfered 2 along each face removes the triangle (1/2) 2^2 sin(a) along 30. V = 5737.599408157",+ "body_count": 1,+ "volume_mm3": 5737.599408157066,+ "tolerance": {+ "rel": 1e-06+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-075-chamfer/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-075-chamfer/recipe.jsonnew file mode 100644index 0000000000..fc995c6aec--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-075-chamfer/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 15.867066805824702,+ -12.175228580174412+ ],+ [+ 15.867066805824702,+ 12.175228580174412+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "distance": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-075-round/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-075-round/expected.jsonnew file mode 100644index 0000000000..26a195617c--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-075-round/expected.json@@ -0,0 +1,14 @@+{+ "sources": [],+ "what": "prism over a 75 degree triangle, apex edge round 2",+ "source": "analytic",+ "method": "prism over a triangle with a 75 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge rounded r 2 removes r^2 (cot(a/2) - (pi - a)/2) along 30. V = 5749.123655869",+ "body_count": 1,+ "volume_mm3": 5749.123655869108,+ "tolerance": {+ "rel": 1e-06+ },+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-075-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-075-round/recipe.jsonnew file mode 100644index 0000000000..e44a37eebf--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-075-round/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 15.867066805824702,+ -12.175228580174412+ ],+ [+ 15.867066805824702,+ 12.175228580174412+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "radius": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-090-chamfer/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-090-chamfer/expected.jsonnew file mode 100644index 0000000000..ad1467fa94--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-090-chamfer/expected.json@@ -0,0 +1,11 @@+{+ "sources": [],+ "what": "prism over a 90 degree triangle, apex edge chamfer 2",+ "source": "analytic",+ "method": "prism over a triangle with a 90 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge chamfered 2 along each face removes the triangle (1/2) 2^2 sin(a) along 30. V = 5940.000000000",+ "body_count": 1,+ "volume_mm3": 5940.0,+ "tolerance": {+ "rel": 1e-06+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-090-chamfer/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-090-chamfer/recipe.jsonnew file mode 100644index 0000000000..46419602b0--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-090-chamfer/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 14.142135623730951,+ -14.14213562373095+ ],+ [+ 14.142135623730951,+ 14.14213562373095+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "distance": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-090-round/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-090-round/expected.jsonnew file mode 100644index 0000000000..92cb668919--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-090-round/expected.json@@ -0,0 +1,14 @@+{+ "sources": [],+ "what": "prism over a 90 degree triangle, apex edge round 2",+ "source": "analytic",+ "method": "prism over a triangle with a 90 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge rounded r 2 removes r^2 (cot(a/2) - (pi - a)/2) along 30. V = 5974.247779608",+ "body_count": 1,+ "volume_mm3": 5974.247779607694,+ "tolerance": {+ "rel": 1e-06+ },+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-090-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-090-round/recipe.jsonnew file mode 100644index 0000000000..e32681a143--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-090-round/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 14.142135623730951,+ -14.14213562373095+ ],+ [+ 14.142135623730951,+ 14.14213562373095+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "radius": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-105-chamfer/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-105-chamfer/expected.jsonnew file mode 100644index 0000000000..5b05f69dff--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-105-chamfer/expected.json@@ -0,0 +1,11 @@+{+ "sources": [],+ "what": "prism over a 105 degree triangle, apex edge chamfer 2",+ "source": "analytic",+ "method": "prism over a triangle with a 105 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge chamfered 2 along each face removes the triangle (1/2) 2^2 sin(a) along 30. V = 5737.599408157",+ "body_count": 1,+ "volume_mm3": 5737.599408157066,+ "tolerance": {+ "rel": 1e-06+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-105-chamfer/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-105-chamfer/recipe.jsonnew file mode 100644index 0000000000..f70b102cb5--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-105-chamfer/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 12.175228580174412,+ -15.867066805824702+ ],+ [+ 12.175228580174412,+ 15.867066805824702+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "distance": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-105-round/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-105-round/expected.jsonnew file mode 100644index 0000000000..0112669846--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-105-round/expected.json@@ -0,0 +1,14 @@+{+ "sources": [],+ "what": "prism over a 105 degree triangle, apex edge round 2",+ "source": "analytic",+ "method": "prism over a triangle with a 105 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge rounded r 2 removes r^2 (cot(a/2) - (pi - a)/2) along 30. V = 5782.015535517",+ "body_count": 1,+ "volume_mm3": 5782.01553551668,+ "tolerance": {+ "rel": 1e-06+ },+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-105-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-105-round/recipe.jsonnew file mode 100644index 0000000000..8d9de90405--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-105-round/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 12.175228580174412,+ -15.867066805824702+ ],+ [+ 12.175228580174412,+ 15.867066805824702+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "radius": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-120-chamfer/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-120-chamfer/expected.jsonnew file mode 100644index 0000000000..1f0b76e6de--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-120-chamfer/expected.json@@ -0,0 +1,11 @@+{+ "sources": [],+ "what": "prism over a 120 degree triangle, apex edge chamfer 2",+ "source": "analytic",+ "method": "prism over a triangle with a 120 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge chamfered 2 along each face removes the triangle (1/2) 2^2 sin(a) along 30. V = 5144.190898480",+ "body_count": 1,+ "volume_mm3": 5144.190898479566,+ "tolerance": {+ "rel": 1e-06+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-120-chamfer/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-120-chamfer/recipe.jsonnew file mode 100644index 0000000000..59ffc5fbd6--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-120-chamfer/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 10.000000000000002,+ -17.32050807568877+ ],+ [+ 10.000000000000002,+ 17.32050807568877+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "distance": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-120-round/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-120-round/expected.jsonnew file mode 100644index 0000000000..98b9a72617--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-120-round/expected.json@@ -0,0 +1,14 @@+{+ "sources": [],+ "what": "prism over a 120 degree triangle, apex edge round 2",+ "source": "analytic",+ "method": "prism over a triangle with a 120 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge rounded r 2 removes r^2 (cot(a/2) - (pi - a)/2) along 30. V = 5189.702243476",+ "body_count": 1,+ "volume_mm3": 5189.702243475674,+ "tolerance": {+ "rel": 1e-06+ },+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-120-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-120-round/recipe.jsonnew file mode 100644index 0000000000..1e75d4db41--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-120-round/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 10.000000000000002,+ -17.32050807568877+ ],+ [+ 10.000000000000002,+ 17.32050807568877+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "radius": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-135-chamfer/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-135-chamfer/expected.jsonnew file mode 100644index 0000000000..9390b75580--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-135-chamfer/expected.json@@ -0,0 +1,11 @@+{+ "sources": [],+ "what": "prism over a 135 degree triangle, apex edge chamfer 2",+ "source": "analytic",+ "method": "prism over a triangle with a 135 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge chamfered 2 along each face removes the triangle (1/2) 2^2 sin(a) along 30. V = 4200.214280248",+ "body_count": 1,+ "volume_mm3": 4200.214280248092,+ "tolerance": {+ "rel": 1e-06+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-135-chamfer/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-135-chamfer/recipe.jsonnew file mode 100644index 0000000000..5b8cae7722--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-135-chamfer/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 7.653668647301797,+ -18.477590650225736+ ],+ [+ 7.653668647301797,+ 18.477590650225736+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "distance": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-135-round/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-135-round/expected.jsonnew file mode 100644index 0000000000..cc978fe667--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-135-round/expected.json@@ -0,0 +1,14 @@+{+ "sources": [],+ "what": "prism over a 135 degree triangle, apex edge round 2",+ "source": "analytic",+ "method": "prism over a triangle with a 135 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge rounded r 2 removes r^2 (cot(a/2) - (pi - a)/2) along 30. V = 4240.058949438",+ "body_count": 1,+ "volume_mm3": 4240.05894943836,+ "tolerance": {+ "rel": 1e-06+ },+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-135-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-135-round/recipe.jsonnew file mode 100644index 0000000000..c3d9314516--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-135-round/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 7.653668647301797,+ -18.477590650225736+ ],+ [+ 7.653668647301797,+ 18.477590650225736+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "radius": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-150-chamfer/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-150-chamfer/expected.jsonnew file mode 100644index 0000000000..1e6cdde8c8--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-150-chamfer/expected.json@@ -0,0 +1,11 @@+{+ "sources": [],+ "what": "prism over a 150 degree triangle, apex edge chamfer 2",+ "source": "analytic",+ "method": "prism over a triangle with a 150 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge chamfered 2 along each face removes the triangle (1/2) 2^2 sin(a) along 30. V = 2970.000000000",+ "body_count": 1,+ "volume_mm3": 2969.9999999999995,+ "tolerance": {+ "rel": 1e-06+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-150-chamfer/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-150-chamfer/recipe.jsonnew file mode 100644index 0000000000..1e880a413a--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-150-chamfer/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 5.176380902050415,+ -19.318516525781366+ ],+ [+ 5.176380902050415,+ 19.318516525781366+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "distance": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-150-round/expected.json b/tests/kernel-cases/fillets/cov-junction-wedge-150-round/expected.jsonnew file mode 100644index 0000000000..b99d6c2a59--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-150-round/expected.json@@ -0,0 +1,14 @@+{+ "sources": [],+ "what": "prism over a 150 degree triangle, apex edge round 2",+ "source": "analytic",+ "method": "prism over a triangle with a 150 degree apex, sides 20, 30 long: V0 = 200 sin(a) * 30. The apex edge rounded r 2 removes r^2 (cot(a/2) - (pi - a)/2) along 30. V = 2999.262023444",+ "body_count": 1,+ "volume_mm3": 2999.262023444163,+ "tolerance": {+ "rel": 1e-06+ },+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-wedge-150-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-wedge-150-round/recipe.jsonnew file mode 100644index 0000000000..3441412b8c--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-wedge-150-round/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "W"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 5.176380902050415,+ -19.318516525781366+ ],+ [+ 5.176380902050415,+ 19.318516525781366+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "W",+ "distance": 30.0,+ "body_name": "Wedge"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 15.0+ ]+ ],+ "radius": 2.0+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/cov-junction-y-junction-120-round/expected.json b/tests/kernel-cases/fillets/cov-junction-y-junction-120-round/expected.jsonnew file mode 100644index 0000000000..c48bb5306e--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-y-junction-120-round/expected.json@@ -0,0 +1,10 @@+{+ "sources": [],+ "what": "three pipes R4 at 120 degrees in a plane, their intersection edges rounded 1",+ "source": "invariants",+ "method": "no closed form for the round on these quadrics' intersection: one valid closed body whose round meets its faces G1",+ "body_count": 1,+ "continuity": {+ "order": "g1"+ }+}diff --git a/tests/kernel-cases/fillets/cov-junction-y-junction-120-round/recipe.json b/tests/kernel-cases/fillets/cov-junction-y-junction-120-round/recipe.jsonnew file mode 100644index 0000000000..f3f6682ea1--- /dev/null+++ b/tests/kernel-cases/fillets/cov-junction-y-junction-120-round/recipe.json@@ -0,0 +1,87 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 4.0,+ "height": 30,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": [+ 6.123233995736766e-17,+ 1.0,+ 0+ ],+ "body_name": "Y"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 4.0,+ "height": 30,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": [+ -0.8660254037844386,+ -0.5000000000000001,+ 0+ ],+ "operation": "join",+ "targets": [+ "Y"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 4.0,+ "height": 30,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": [+ 0.8660254037844384,+ -0.5000000000000004,+ 0+ ],+ "operation": "join",+ "targets": [+ "Y"+ ]+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ -2.4492935982947064e-16,+ -4.0,+ 2.0+ ],+ [+ 3.4641016151377544,+ 2.0000000000000004,+ 2.0+ ],+ [+ -3.4641016151377535,+ 2.0000000000000018,+ 2.0+ ]+ ],+ "radius": 1+ }+ }+ ]+}