Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

Wave 57/509: kernel-cases: threads cases from modelled-thread reports (2 of 2), skipped sources

Brennen Herbruck3c662616218c
diff --git a/tests/kernel-cases/threads/2406-modelled-m8-thread-in-6.8mm-pilot-hole/expected.json b/tests/kernel-cases/threads/2406-modelled-m8-thread-in-6.8mm-pilot-hole/expected.json
new file mode 100644
index 0000000000..43f6a5f071
--- /dev/null
+++ b/tests/kernel-cases/threads/2406-modelled-m8-thread-in-6.8mm-pilot-hole/expected.json
@@ -0,0 +1,31 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#2406"
+ ],
+ "what": "an M8 modelled thread in a 6.8 mm pilot hole (the case where the thread 'was not visible')",
+ "source": "analytic",
+ "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Block 20x20x10 with a 6.8 mm through hole (rho=3.4, a 0.6 mm groove depth at M8x1.25), M8 over the full 10 mm (8 turns, both ends free): V = 4000 - pi 3.4^2 10 - 8 x V_turn(clipped at r=3.4) = 3636.8319 - 8 x 6.88085 = 3581.7851 mm3. COM on the axis at z=5. Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
+ "outcome": "solid",
+ "body_count": 1,
+ "volume_mm3": 3581.7851,
+ "center_of_mass": [
+ 0,
+ 0,
+ 5.0
+ ],
+ "tolerance": {
+ "rel": 0.01
+ },
+ "bbox": {
+ "min": [
+ -10,
+ -10,
+ 0
+ ],
+ "max": [
+ 10,
+ 10,
+ 10
+ ]
+ }
+}
diff --git a/tests/kernel-cases/threads/2406-modelled-m8-thread-in-6.8mm-pilot-hole/recipe.json b/tests/kernel-cases/threads/2406-modelled-m8-thread-in-6.8mm-pilot-hole/recipe.json
new file mode 100644
index 0000000000..17b399f74f
--- /dev/null
+++ b/tests/kernel-cases/threads/2406-modelled-m8-thread-in-6.8mm-pilot-hole/recipe.json
@@ -0,0 +1,41 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ -10,
+ -10,
+ 0
+ ],
+ "length": 20,
+ "width": 20,
+ "height": 10,
+ "body_name": "Block"
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ 0,
+ 0,
+ 10
+ ],
+ "diameter": 6.8
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 3.4,
+ 0,
+ 5.0
+ ],
+ "designation": "M8",
+ "modeled": true
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/threads/2526-three-modelled-threads-in-one-body/expected.json b/tests/kernel-cases/threads/2526-three-modelled-threads-in-one-body/expected.json
new file mode 100644
index 0000000000..4280142e69
--- /dev/null
+++ b/tests/kernel-cases/threads/2526-three-modelled-threads-in-one-body/expected.json
@@ -0,0 +1,26 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#2526"
+ ],
+ "what": "three modelled threads, internal and external, in one body with a hub and a plain hole beside the bore (each thread used to facet the rest of the part and the next thread was refused)",
+ "source": "analytic",
+ "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Block 40x40x20, a hub R=10 h=10 on top, a 6.75 mm bore through both (30 long), a 3.3 mm hole through the block at (15,15). Three modelled threads on one body: M8 over 8 mm of the bore from the free top end (8/1.25 = 6.4 turns), M4 over the whole 20 mm of the 3.3 mm hole (20/0.7 turns), M20x2.5 over 6 mm of the hub from its free top end (2.4 turns). Plain solid: 32000 + pi 10^2 10 - pi 3.375^2 30 - pi 1.65^2 20 = 33896.9918. Grooves: 46.9780 + 32.4641 + 271.1296. V = 33546.4201 mm3. Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
+ "outcome": "solid",
+ "body_count": 1,
+ "volume_mm3": 33546.4201,
+ "tolerance": {
+ "rel": 0.01
+ },
+ "bbox": {
+ "min": [
+ -20,
+ -20,
+ 0
+ ],
+ "max": [
+ 20,
+ 20,
+ 30
+ ]
+ }
+}
diff --git a/tests/kernel-cases/threads/2526-three-modelled-threads-in-one-body/recipe.json b/tests/kernel-cases/threads/2526-three-modelled-threads-in-one-body/recipe.json
new file mode 100644
index 0000000000..6ef2bb207d
--- /dev/null
+++ b/tests/kernel-cases/threads/2526-three-modelled-threads-in-one-body/recipe.json
@@ -0,0 +1,94 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ -20,
+ -20,
+ 0
+ ],
+ "length": 40,
+ "width": 40,
+ "height": 20,
+ "body_name": "Block"
+ }
+ },
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 10,
+ "height": 10,
+ "base": [
+ 0,
+ 0,
+ 20
+ ],
+ "operation": "join",
+ "targets": [
+ "Block"
+ ]
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ 0,
+ 0,
+ 30
+ ],
+ "diameter": 6.75
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ 15,
+ 15,
+ 20
+ ],
+ "diameter": 3.3
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 3.375,
+ 0,
+ 29
+ ],
+ "designation": "M8",
+ "length": 8,
+ "modeled": true
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 16.65,
+ 15,
+ 10
+ ],
+ "designation": "M4",
+ "modeled": true
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 10,
+ 0,
+ 29
+ ],
+ "designation": "M20",
+ "length": 6,
+ "modeled": true
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/threads/2705-m14-thread-on-14.6mm-boss-turned-to-major/expected.json b/tests/kernel-cases/threads/2705-m14-thread-on-14.6mm-boss-turned-to-major/expected.json
new file mode 100644
index 0000000000..2303baf8e7
--- /dev/null
+++ b/tests/kernel-cases/threads/2705-m14-thread-on-14.6mm-boss-turned-to-major/expected.json
@@ -0,0 +1,26 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#2705"
+ ],
+ "what": "a modelled M14 thread on a 14.6 mm boss, slightly thicker than the thread (refused: the face is too far from the thread's diameter)",
+ "source": "analytic",
+ "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. A 14.6 mm boss (R=7.3, 15 tall) on a 20x20x4 plate takes a modelled M14 (P=2) over 10 mm from its free top end. The boss is thicker than the major diameter, so a die turns it down to 14 mm over the threaded length first (ring pi (7.3^2 - 7^2) 10 = 134.7743) and the groove is cut from there (5 turns, 50.18900 each). V = 1600 + pi 7.3^2 15 - 134.7743 - 5 x 50.18900 = 3725.5127 mm3. The groove's last end may nick the unturned boss by well under 0.2 mm3. Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
+ "outcome": "solid",
+ "body_count": 1,
+ "volume_mm3": 3725.5127,
+ "tolerance": {
+ "rel": 0.01
+ },
+ "bbox": {
+ "min": [
+ -10,
+ -10,
+ 0
+ ],
+ "max": [
+ 10,
+ 10,
+ 19
+ ]
+ }
+}
diff --git a/tests/kernel-cases/threads/2705-m14-thread-on-14.6mm-boss-turned-to-major/recipe.json b/tests/kernel-cases/threads/2705-m14-thread-on-14.6mm-boss-turned-to-major/recipe.json
new file mode 100644
index 0000000000..0562503bea
--- /dev/null
+++ b/tests/kernel-cases/threads/2705-m14-thread-on-14.6mm-boss-turned-to-major/recipe.json
@@ -0,0 +1,47 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ -10,
+ -10,
+ 0
+ ],
+ "length": 20,
+ "width": 20,
+ "height": 4,
+ "body_name": "Part"
+ }
+ },
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 7.3,
+ "height": 15,
+ "base": [
+ 0,
+ 0,
+ 4
+ ],
+ "operation": "join",
+ "targets": [
+ "Part"
+ ]
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 7.3,
+ 0,
+ 17
+ ],
+ "designation": "M14",
+ "length": 10,
+ "modeled": true
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/threads/2822-modelled-thread-in-filleted-cube/expected.json b/tests/kernel-cases/threads/2822-modelled-thread-in-filleted-cube/expected.json
new file mode 100644
index 0000000000..fd7ce87291
--- /dev/null
+++ b/tests/kernel-cases/threads/2822-modelled-thread-in-filleted-cube/expected.json
@@ -0,0 +1,31 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#2822"
+ ],
+ "what": "a modelled M3 thread in a hole through a block whose vertical edges are rounded (the fillets showed as black lines after the thread)",
+ "source": "analytic",
+ "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Cube 20x20x10 with its four vertical edges rounded R2: each removes (1 - pi/4) R^2 x 10 = 8.5841, total 34.3363. A 2.5 mm through hole (the M3 tap drill, rho=1.25) with M3 (P=0.5) over the whole 10 mm (20 turns): V = 4000 - 34.3363 - pi 1.25^2 10 - 20 x 0.43729 = 3907.8305 mm3. By symmetry COM = (10,10,5). Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
+ "outcome": "solid",
+ "body_count": 1,
+ "volume_mm3": 3907.8305,
+ "center_of_mass": [
+ 10,
+ 10,
+ 5
+ ],
+ "tolerance": {
+ "rel": 0.01
+ },
+ "bbox": {
+ "min": [
+ 0,
+ 0,
+ 0
+ ],
+ "max": [
+ 20,
+ 20,
+ 10
+ ]
+ }
+}
diff --git a/tests/kernel-cases/threads/2822-modelled-thread-in-filleted-cube/recipe.json b/tests/kernel-cases/threads/2822-modelled-thread-in-filleted-cube/recipe.json
new file mode 100644
index 0000000000..adbca23162
--- /dev/null
+++ b/tests/kernel-cases/threads/2822-modelled-thread-in-filleted-cube/recipe.json
@@ -0,0 +1,85 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 0,
+ 0
+ ],
+ "p1": [
+ 20,
+ 20
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 10,
+ "body_name": "Cube"
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 0,
+ 0,
+ 5
+ ],
+ [
+ 20,
+ 0,
+ 5
+ ],
+ [
+ 20,
+ 20,
+ 5
+ ],
+ [
+ 0,
+ 20,
+ 5
+ ]
+ ],
+ "radius": 2
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ 10,
+ 10,
+ 10
+ ],
+ "diameter": 2.5
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 11.25,
+ 10,
+ 5
+ ],
+ "designation": "M3",
+ "modeled": true
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/threads/2969-m48x0.75-thread-in-48mm-hole/expected.json b/tests/kernel-cases/threads/2969-m48x0.75-thread-in-48mm-hole/expected.json
new file mode 100644
index 0000000000..e730c02156
--- /dev/null
+++ b/tests/kernel-cases/threads/2969-m48x0.75-thread-in-48mm-hole/expected.json
@@ -0,0 +1,31 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#2969"
+ ],
+ "what": "a modelled M48x0.75 internal thread in a 48 mm hole (a workflow Fusion accepts)",
+ "source": "analytic",
+ "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. A 48 mm hole through a D54 x 3 disc, drawn at the thread's nominal size, takes a modelled M48x0.75: the hole is first filled to the tap drill (major - pitch = 47.25 mm, rho=23.625), then the groove is cut, the same thread as in a hole drilled at the tap drill. Whole length, both ends free (4 turns): V = pi 27^2 3 - pi 23.625^2 3 - 4 x V_turn(clipped at rho) = 6870.6631 - 5260.3515 - 4 x 17.37563 = 1540.8091 mm3. The thin lips a tap leaves at each end are below 0.2% of the volume. Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
+ "outcome": "solid",
+ "body_count": 1,
+ "volume_mm3": 1540.8091,
+ "tolerance": {
+ "rel": 0.01
+ },
+ "bbox": {
+ "min": [
+ -27,
+ -27,
+ 0
+ ],
+ "max": [
+ 27,
+ 27,
+ 3
+ ]
+ },
+ "center_of_mass": [
+ 0,
+ 0,
+ 1.5
+ ]
+}
diff --git a/tests/kernel-cases/threads/2969-m48x0.75-thread-in-48mm-hole/recipe.json b/tests/kernel-cases/threads/2969-m48x0.75-thread-in-48mm-hole/recipe.json
new file mode 100644
index 0000000000..76867f2b49
--- /dev/null
+++ b/tests/kernel-cases/threads/2969-m48x0.75-thread-in-48mm-hole/recipe.json
@@ -0,0 +1,35 @@
+{
+ "commands": [
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 27,
+ "height": 3,
+ "body_name": "Nut"
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ 0,
+ 0,
+ 3
+ ],
+ "diameter": 48
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 24.0,
+ 0,
+ 1.5
+ ],
+ "designation": "M48x0.75",
+ "modeled": true
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/threads/3311-two-tapped-holes-both-modelled-threaded/expected.json b/tests/kernel-cases/threads/3311-two-tapped-holes-both-modelled-threaded/expected.json
new file mode 100644
index 0000000000..e9aa4a3199
--- /dev/null
+++ b/tests/kernel-cases/threads/3311-two-tapped-holes-both-modelled-threaded/expected.json
@@ -0,0 +1,26 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3311"
+ ],
+ "what": "a second modelled thread on the same body (the first thread faceted every other hole), over each hole's full length",
+ "source": "analytic",
+ "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Block 40x20x9 with two M5 tapped holes (drill 4.2, rho=2.1), each modelled-threaded over its whole 9 mm (11.25 turns, both ends free): V = 7200 - 2 pi 2.1^2 9 - 2 x 11.25 x V_turn(clipped at 2.1) = 6950.6204 - 22.5 x 1.87431 = 6908.4483 mm3. Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
+ "outcome": "solid",
+ "body_count": 1,
+ "volume_mm3": 6908.4483,
+ "tolerance": {
+ "rel": 0.01
+ },
+ "bbox": {
+ "min": [
+ 0,
+ 0,
+ 0
+ ],
+ "max": [
+ 40,
+ 20,
+ 9
+ ]
+ }
+}
diff --git a/tests/kernel-cases/threads/3311-two-tapped-holes-both-modelled-threaded/recipe.json b/tests/kernel-cases/threads/3311-two-tapped-holes-both-modelled-threaded/recipe.json
new file mode 100644
index 0000000000..4b04f76048
--- /dev/null
+++ b/tests/kernel-cases/threads/3311-two-tapped-holes-both-modelled-threaded/recipe.json
@@ -0,0 +1,64 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ 0,
+ 0,
+ 0
+ ],
+ "length": 40,
+ "width": 20,
+ "height": 9,
+ "body_name": "Block"
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ 10,
+ 10,
+ 9
+ ],
+ "thread": "M5"
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ 30,
+ 10,
+ 9
+ ],
+ "thread": "M5"
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 12.1,
+ 10,
+ 4.5
+ ],
+ "designation": "M5",
+ "modeled": true
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 32.1,
+ 10,
+ 4.5
+ ],
+ "designation": "M5",
+ "modeled": true
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/threads/3366-m20-thread-in-20mm-hole/expected.json b/tests/kernel-cases/threads/3366-m20-thread-in-20mm-hole/expected.json
new file mode 100644
index 0000000000..94019f9725
--- /dev/null
+++ b/tests/kernel-cases/threads/3366-m20-thread-in-20mm-hole/expected.json
@@ -0,0 +1,32 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3366",
+ "tangency-labs/solidcraft#3367"
+ ],
+ "what": "a modelled M20 internal thread in a 20 mm hole, made after the 20 mm cylinder's own thread",
+ "source": "analytic",
+ "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. A 20 mm hole through a D48 x 10 disc, drawn at the thread's nominal size, takes a modelled M20: the hole is first filled to the tap drill (major - pitch = 17.5 mm, rho=8.75), then the groove is cut, the same thread as in a hole drilled at the tap drill. Whole length, both ends free (4 turns): V = pi 24^2 10 - pi 8.75^2 10 - 4 x V_turn(clipped at rho) = 18095.5737 - 2405.2819 - 4 x 74.96751 = 15390.4218 mm3. The thin lips a tap leaves at each end are below 0.2% of the volume. Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
+ "outcome": "solid",
+ "body_count": 1,
+ "volume_mm3": 15390.4218,
+ "tolerance": {
+ "rel": 0.01
+ },
+ "bbox": {
+ "min": [
+ -24,
+ -24,
+ 0
+ ],
+ "max": [
+ 24,
+ 24,
+ 10
+ ]
+ },
+ "center_of_mass": [
+ 0,
+ 0,
+ 5.0
+ ]
+}
diff --git a/tests/kernel-cases/threads/3366-m20-thread-in-20mm-hole/recipe.json b/tests/kernel-cases/threads/3366-m20-thread-in-20mm-hole/recipe.json
new file mode 100644
index 0000000000..6faa07f4fb
--- /dev/null
+++ b/tests/kernel-cases/threads/3366-m20-thread-in-20mm-hole/recipe.json
@@ -0,0 +1,35 @@
+{
+ "commands": [
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 24,
+ "height": 10,
+ "body_name": "Nut"
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ 0,
+ 0,
+ 10
+ ],
+ "diameter": 20
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 10.0,
+ 0,
+ 5.0
+ ],
+ "designation": "M20",
+ "modeled": true
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/threads/3914-sketch-on-top-face-of-threaded-rounded-block/expected.json b/tests/kernel-cases/threads/3914-sketch-on-top-face-of-threaded-rounded-block/expected.json
new file mode 100644
index 0000000000..3d7aaf2775
--- /dev/null
+++ b/tests/kernel-cases/threads/3914-sketch-on-top-face-of-threaded-rounded-block/expected.json
@@ -0,0 +1,26 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3914"
+ ],
+ "what": "Create Sketch on the top face of a block with a modelled thread and rounded corners, then a boss from it",
+ "source": "analytic",
+ "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Box 20^3, a D5 hole 20 deep (rho=2.5), M6 (P=1) over the whole 20 mm (20 turns, both ends free), the four vertical edges rounded R2 (68.6726), then a sketch on the top face with a 4x4 rectangle at least 4 mm from the hole centre, extruded 5 mm and joined: +80. V = 8000 - 68.6726 - pi 2.5^2 20 - 20 x 3.49832 + 80 = 7548.6619 mm3. Create Sketch on that face was refused ('its history can't tell it apart from other faces'). Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
+ "outcome": "solid",
+ "body_count": 1,
+ "volume_mm3": 7548.6619,
+ "tolerance": {
+ "rel": 0.01
+ },
+ "bbox": {
+ "min": [
+ 0,
+ 0,
+ 0
+ ],
+ "max": [
+ 20,
+ 20,
+ 25
+ ]
+ }
+}
diff --git a/tests/kernel-cases/threads/3914-sketch-on-top-face-of-threaded-rounded-block/recipe.json b/tests/kernel-cases/threads/3914-sketch-on-top-face-of-threaded-rounded-block/recipe.json
new file mode 100644
index 0000000000..2e0e1756b9
--- /dev/null
+++ b/tests/kernel-cases/threads/3914-sketch-on-top-face-of-threaded-rounded-block/recipe.json
@@ -0,0 +1,109 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ 0,
+ 0,
+ 0
+ ],
+ "length": 20,
+ "width": 20,
+ "height": 20,
+ "body_name": "Block"
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ 10,
+ 10,
+ 20
+ ],
+ "diameter": 5,
+ "depth": 20
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 12.5,
+ 10,
+ 10
+ ],
+ "designation": "M6",
+ "modeled": true
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 0,
+ 0,
+ 10
+ ],
+ [
+ 20,
+ 0,
+ 10
+ ],
+ [
+ 20,
+ 20,
+ 10
+ ],
+ [
+ 0,
+ 20,
+ 10
+ ]
+ ],
+ "radius": 2
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "face": [
+ 5,
+ 5,
+ 20
+ ]
+ }
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 3,
+ 3
+ ],
+ "p1": [
+ 7,
+ 7
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 5,
+ "operation": "join",
+ "targets": [
+ "Block"
+ ]
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/threads/3952-modelled-thread-in-blind-hole-of-revolved-ring/expected.json b/tests/kernel-cases/threads/3952-modelled-thread-in-blind-hole-of-revolved-ring/expected.json
new file mode 100644
index 0000000000..fc806d35fd
--- /dev/null
+++ b/tests/kernel-cases/threads/3952-modelled-thread-in-blind-hole-of-revolved-ring/expected.json
@@ -0,0 +1,23 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3952"
+ ],
+ "what": "a modelled thread in a small blind hole drilled into a revolved ring, off its axis ('faceted boolean: inconsistent volumes')",
+ "source": "analytic",
+ "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Revolved ring R12..30, 30 tall: pi (30^2 - 12^2) 30 = 71251.3214. A D2.5 flat-bottomed hole 8 deep at 21 mm from the axis (pi 1.25^2 8 = 39.2699), M3 (P=0.5, rho=1.25) over the hole's whole 8 mm (16 turns): 16 x 0.43729. The blind end can shift the groove's last end by under 0.25 mm3. V = 71205.0548 mm3. Tolerance 1e-3 (the ring dominates the volume; the check is that the thread builds a valid solid, which it once refused: faceted boolean: inconsistent volumes).",
+ "outcome": "solid",
+ "body_count": 1,
+ "volume_mm3": 71205.0548,
+ "bbox": {
+ "min": [
+ -30,
+ -30,
+ 0
+ ],
+ "max": [
+ 30,
+ 30,
+ 30
+ ]
+ }
+}
diff --git a/tests/kernel-cases/threads/3952-modelled-thread-in-blind-hole-of-revolved-ring/recipe.json b/tests/kernel-cases/threads/3952-modelled-thread-in-blind-hole-of-revolved-ring/recipe.json
new file mode 100644
index 0000000000..f7e5fdbc99
--- /dev/null
+++ b/tests/kernel-cases/threads/3952-modelled-thread-in-blind-hole-of-revolved-ring/recipe.json
@@ -0,0 +1,90 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XZ",
+ "name": "Sketch1"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 12,
+ 0
+ ],
+ [
+ 30,
+ 0
+ ],
+ [
+ 30,
+ -30
+ ],
+ [
+ 12,
+ -30
+ ]
+ ],
+ "closed": true
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.revolve",
+ "params": {
+ "sketch": "Sketch1",
+ "axis": "Z"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY",
+ "offset": "30 mm",
+ "name": "Sketch2"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 21,
+ 0
+ ],
+ "diameter": 2.5
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "sketch": "Sketch2",
+ "profiles": "all",
+ "distance": 8,
+ "direction": "negative",
+ "operation": "cut"
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 22.25,
+ 0,
+ 26
+ ],
+ "designation": "M3",
+ "modeled": true
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/threads/4149-internal-thread-below-counterbore-filleted-rim/expected.json b/tests/kernel-cases/threads/4149-internal-thread-below-counterbore-filleted-rim/expected.json
new file mode 100644
index 0000000000..02d00be605
--- /dev/null
+++ b/tests/kernel-cases/threads/4149-internal-thread-below-counterbore-filleted-rim/expected.json
@@ -0,0 +1,26 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#4149"
+ ],
+ "what": "a modelled M10x1.5 internal thread, full length of the bore below a counterbore, in a cylinder with its rim rounded (stack overflow)",
+ "source": "analytic",
+ "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Cylinder D40 h=30; a 8.5 mm through hole with a D18 x 5 counterbore (hole volume pi(9^2 5 + 4.25^2 25) = 2690.9705); the top outer edge rounded R3: removed = 2 pi (R - xbar) A with A = r^2 (1 - pi/4) = 1.9314 and the removed corner's centroid xbar = r (5/6 - pi/4)/(1 - pi/4) = 0.6701 from the corner, so 234.5769. M10x1.5 over the 25 mm of the bore below the counterbore (16.667 turns, rho=4.25): the thread ends at the counterbore floor, so the last groove end may stop up to half a groove short of it; that is under 0.3 mm of pitch, below 4 mm3. V = 37699.1118 - 234.5769 - 2690.9705 - 16.667 x 13.26888 = 34552.4164 mm3. Tolerance 0.3%: faceted helix as for the other thread cases; that is 110 mm3 on this large body (the groove itself is 192 mm3), and the end effect and the faceting stay far below it.",
+ "outcome": "solid",
+ "body_count": 1,
+ "volume_mm3": 34552.4164,
+ "tolerance": {
+ "rel": 0.003
+ },
+ "bbox": {
+ "min": [
+ -20,
+ -20,
+ 0
+ ],
+ "max": [
+ 20,
+ 20,
+ 30
+ ]
+ }
+}
diff --git a/tests/kernel-cases/threads/4149-internal-thread-below-counterbore-filleted-rim/recipe.json b/tests/kernel-cases/threads/4149-internal-thread-below-counterbore-filleted-rim/recipe.json
new file mode 100644
index 0000000000..380dd16700
--- /dev/null
+++ b/tests/kernel-cases/threads/4149-internal-thread-below-counterbore-filleted-rim/recipe.json
@@ -0,0 +1,52 @@
+{
+ "commands": [
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 20,
+ "height": 30,
+ "body_name": "Part"
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ 0,
+ 0,
+ 30
+ ],
+ "diameter": 8.5,
+ "type": "counterbore",
+ "cb_diameter": 18,
+ "cb_depth": 5
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 20,
+ 0,
+ 30
+ ]
+ ],
+ "radius": 3
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 0,
+ -4.25,
+ 12.5
+ ],
+ "designation": "M10x1.5",
+ "length": 25,
+ "modeled": true
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/threads/602-fillet-hex-head-beside-modelled-thread/expected.json b/tests/kernel-cases/threads/602-fillet-hex-head-beside-modelled-thread/expected.json
new file mode 100644
index 0000000000..2d5cff8c59
--- /dev/null
+++ b/tests/kernel-cases/threads/602-fillet-hex-head-beside-modelled-thread/expected.json
@@ -0,0 +1,27 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#602",
+ "tangency-labs/solidcraft#618"
+ ],
+ "what": "rounding the top edges of a hex head on a shaft with a modelled thread (it froze the app)",
+ "source": "analytic",
+ "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Shaft D5 h=10 plus a hexagonal head of apothem a=2 (area 2 sqrt3 a^2 = 13.8564), h=3. M5 (P=0.8) over 4 mm from the free bottom end (5 turns): 5 x 2.84480. The six top edges rounded R=r=0.3 with the vertical edges left sharp: the section at depth y below the top is a hexagon of apothem a - d(y), d = r - sqrt(r^2 - (r-y)^2); removed = 2 sqrt3 int (2 a d - d^2) dy = 2 sqrt3 [2 a r^2 (1 - pi/4) - r^3 (5/3 - pi/2)] = 0.25866. V = pi 2.5^2 10 + 41.5692 - 5 x 2.84480 - 0.25866 = 223.4361 mm3. Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
+ "outcome": "solid",
+ "body_count": 1,
+ "volume_mm3": 223.4361,
+ "tolerance": {
+ "rel": 0.01
+ },
+ "bbox": {
+ "min": [
+ -2.5,
+ -2.5,
+ 0
+ ],
+ "max": [
+ 2.5,
+ 2.5,
+ 13
+ ]
+ }
+}
diff --git a/tests/kernel-cases/threads/602-fillet-hex-head-beside-modelled-thread/recipe.json b/tests/kernel-cases/threads/602-fillet-hex-head-beside-modelled-thread/recipe.json
new file mode 100644
index 0000000000..1dd9de4ffd
--- /dev/null
+++ b/tests/kernel-cases/threads/602-fillet-hex-head-beside-modelled-thread/recipe.json
@@ -0,0 +1,127 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "diameter": 5
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 10,
+ "body_name": "Screw"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "face": [
+ 0,
+ 0,
+ 10
+ ]
+ }
+ }
+ },
+ {
+ "command": "sketch.polygon.circumscribed",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 2,
+ "sides": 6
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 3,
+ "profiles": [
+ {
+ "point": [
+ 0,
+ 0
+ ]
+ }
+ ],
+ "operation": "join",
+ "targets": [
+ "Screw"
+ ]
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 2.5,
+ 0,
+ 5
+ ],
+ "designation": "M5",
+ "length": 4,
+ "modeled": true
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 1.7320508075688774,
+ 0.9999999999999999,
+ 13
+ ],
+ [
+ 1.2246467991473532e-16,
+ 2.0,
+ 13
+ ],
+ [
+ -1.7320508075688774,
+ 0.9999999999999999,
+ 13
+ ],
+ [
+ -1.7320508075688772,
+ -1.0000000000000002,
+ 13
+ ],
+ [
+ -3.6739403974420594e-16,
+ -2.0,
+ 13
+ ],
+ [
+ 1.7320508075688767,
+ -1.0000000000000009,
+ 13
+ ]
+ ],
+ "radius": 0.3
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/threads/995-m5-thread-in-5mm-hole/expected.json b/tests/kernel-cases/threads/995-m5-thread-in-5mm-hole/expected.json
new file mode 100644
index 0000000000..5069a84e04
--- /dev/null
+++ b/tests/kernel-cases/threads/995-m5-thread-in-5mm-hole/expected.json
@@ -0,0 +1,32 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#995",
+ "tangency-labs/solidcraft#1018"
+ ],
+ "what": "a modelled M5 thread in a hole drawn at 5 mm, the thread's own size (nothing was cut: the wall only turned faceted)",
+ "source": "analytic",
+ "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. A 5 mm hole through a D14 x 4 disc, drawn at the thread's nominal size, takes a modelled M5: the hole is first filled to the tap drill (major - pitch = 4.2 mm, rho=2.1), then the groove is cut, the same thread as in a hole drilled at the tap drill. Whole length, both ends free (5 turns): V = pi 7^2 4 - pi 2.1^2 4 - 5 x V_turn(clipped at rho) = 615.7522 - 55.4177 - 5 x 1.87431 = 550.9629 mm3. The thin lips a tap leaves at each end are below 0.2% of the volume. Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
+ "outcome": "solid",
+ "body_count": 1,
+ "volume_mm3": 550.9629,
+ "tolerance": {
+ "rel": 0.01
+ },
+ "bbox": {
+ "min": [
+ -7,
+ -7,
+ 0
+ ],
+ "max": [
+ 7,
+ 7,
+ 4
+ ]
+ },
+ "center_of_mass": [
+ 0,
+ 0,
+ 2.0
+ ]
+}
diff --git a/tests/kernel-cases/threads/995-m5-thread-in-5mm-hole/recipe.json b/tests/kernel-cases/threads/995-m5-thread-in-5mm-hole/recipe.json
new file mode 100644
index 0000000000..7a8e9548f4
--- /dev/null
+++ b/tests/kernel-cases/threads/995-m5-thread-in-5mm-hole/recipe.json
@@ -0,0 +1,35 @@
+{
+ "commands": [
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 7,
+ "height": 4,
+ "body_name": "Nut"
+ }
+ },
+ {
+ "command": "solid.hole",
+ "params": {
+ "position": [
+ 0,
+ 0,
+ 4
+ ],
+ "diameter": 5
+ }
+ },
+ {
+ "command": "solid.thread",
+ "params": {
+ "face": [
+ 2.5,
+ 0,
+ 2.0
+ ],
+ "designation": "M5",
+ "modeled": true
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/threads/skipped.json b/tests/kernel-cases/threads/skipped.json
new file mode 100644
index 0000000000..ed39d1f349
--- /dev/null
+++ b/tests/kernel-cases/threads/skipped.json
@@ -0,0 +1,230 @@
+[
+ {
+ "source": "tangency-labs/solidcraft#4093",
+ "why": "other area: sweeps (a guided helical sweep cut whose exported mesh has open boundaries; not the Thread feature)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#4087",
+ "why": "feature request: the thread as a few selectable faces rather than many facets; no closed-form face count, no number to grade"
+ },
+ {
+ "source": "tangency-labs/solidcraft#4085",
+ "why": "no new geometry: M6 on a 7 mm shaft is a shaft thicker than the thread, the family of case 2705"
+ },
+ {
+ "source": "tangency-labs/solidcraft#4033",
+ "why": "visual only: the thread's facets look faceted; the report has no design, only a face point"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3847",
+ "why": "other area: tessellation (display plans for threads and pointed ends of imported STEP bodies)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3745",
+ "why": "UI only: hover highlight of a large thread computed on the main thread"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3737",
+ "why": "UI only: orbit and zoom freeze in edge highlighting on the main thread"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3710",
+ "why": "no repro geometry: the report has only the face point of a private design (an app that stopped responding)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3519",
+ "why": "UI only: the Thread dialog was applied with no cylindrical face selected"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3467",
+ "why": "no repro geometry: 'planar boolean: shell not oriented and closed' with only the face point of a private design; the same family as case 3311-two-tapped-holes-both-modelled-threaded"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3386",
+ "why": "other area: crashes (a crash report with only a face point, no design)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3337",
+ "why": "no repro geometry: 'planar boolean: shell not oriented and closed' with only a face point; the same family as case 3311-two-tapped-holes-both-modelled-threaded"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3307",
+ "why": "no repro: a hole with a thread size is a cosmetic thread by default (see case 2115-tapped-hole-drill-is-major-minus-pitch)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3183",
+ "why": "no repro geometry: 'planar boolean: tree too deep' redefining a thread after a fillet; sizes of the private design unknown"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3165",
+ "why": "empty report (the body was not pasted)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3145",
+ "why": "feature request: threads without turning the whole body into facets; no number to grade (the multi-thread case 2526-three-modelled-threads-in-one-body covers the symptom)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3133",
+ "why": "CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3131",
+ "why": "no repro geometry: 'the face is too far from the thread's diameter' with only a face point; the family of case 2369"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3110",
+ "why": "not kernel geometry: the automatic-size lookup refuses a 78 mm shaft (no standard size); a cosmetic thread leaves the model unchanged"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2929",
+ "why": "test flakiness of the off-window-thread tests: not geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2908",
+ "why": "test flakiness of the off-window-thread tests: not geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2892",
+ "why": "no repro geometry: 'planar boolean: tree too deep' for an M22x2.5 modelled thread, with only a face point"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2796",
+ "why": "other area: crashes (a crash report with only a face point, no design)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2470",
+ "why": "other area: crashes (a crash report with only a face point, no design)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2467",
+ "why": "window-thread / UI responsiveness, not modelled threads: no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2451",
+ "why": "other area: crashes (a crash report with only a face point, no design)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2079",
+ "why": "tracker for modelled threads; the geometry is in cases 2038-* and 2526-*"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1794",
+ "why": "no repro geometry: 'no cylindrical face there to thread' with only a face point of a private design; the family of case 2038-internal-then-external-thread-on-one-body"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1731",
+ "why": "no repro geometry: 'planar boolean: shell not oriented and closed' with only a face point; the family of case 3311-two-tapped-holes-both-modelled-threaded"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1289",
+ "why": "other area: tessellation (imported STEP threads displayed with artifacts; the B-rep was fine)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1024",
+ "why": "test-process memory corruption on Windows in the thread tests, not a geometry result with a right answer"
+ },
+ {
+ "source": "tangency-labs/solidcraft#873",
+ "why": "other area: booleans (a hexagon join beside a screw: 'join cannot preserve the original faces'; no thread involved)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#524",
+ "why": "design preference (thread adds material instead of cutting into the part) and a groove-end convention at shoulders with no derivable number; the hole-too-wide fill it was linked to is case 1443-m5x0.7-thread-in-5mm-hole"
+ },
+ {
+ "source": "tangency-labs/solidcraft#519",
+ "why": "feature request: a thread as 1 to 3 faces so it can be offset; no closed-form face count to grade"
+ },
+ {
+ "source": "tangency-labs/solidcraft#424",
+ "why": "Insert Part bolts carry cosmetic threads by design (the comment asks for a modelled option); no geometry defect"
+ },
+ {
+ "source": "tangency-labs/solidcraft#287",
+ "why": "performance umbrella: multithreading, SIMD, caching; nothing to grade"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3870",
+ "why": "other area: tessellation (hover and select a thread as one piece: display and picking groups)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3849",
+ "why": "other area: tessellation (display plans for STEP threads and pointed ends)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3738",
+ "why": "UI and data: tapped-hole catalogue of metric fine, UNC and UNF sizes with tabulated pilot drills; no closed form"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3622",
+ "why": "test flakiness: not geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3609",
+ "why": "CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3340",
+ "why": "CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3135",
+ "why": "CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2868",
+ "why": "UI only: cosmetic thread markings as a display preference"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2679",
+ "why": "CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2468",
+ "why": "CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2265",
+ "why": "UI only: reopening a Thread feature lost its face selection"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2264",
+ "why": "UI only: modelled-thread preview in the dialog"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2243",
+ "why": "other area: import (STEP export read-back hangs meshing a seam cylinder hole)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2095",
+ "why": "performance: kernel profile timings of a thread's faceted cut"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1759",
+ "why": "UI only: the Thread dialog's size suggestion"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1675",
+ "why": "CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1527",
+ "why": "other area: booleans (last-resort nudge of a pleat loft join; not a thread)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1524",
+ "why": "assembly joints (gear, rack and screw couplings between motions): no kernel geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1300",
+ "why": "other area: tessellation (display of imported modelled threads)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1201",
+ "why": "CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1020",
+ "why": "CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry"
+ }
+]