SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 60/509: kernel-cases: sweeps lofted tubes, blades and windows from #968-#2992
Brennen Herbruck57efe54fbd4a
diff --git a/tests/kernel-cases/sweeps/1093-circular-pattern-of-a-lofted-join-blade/expected.json b/tests/kernel-cases/sweeps/1093-circular-pattern-of-a-lofted-join-blade/expected.jsonnew file mode 100644index 0000000000..9873400a6e--- /dev/null+++ b/tests/kernel-cases/sweeps/1093-circular-pattern-of-a-lofted-join-blade/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#1093",+ "tangency-labs/solidcraft#1107"+ ],+ "what": "a tapered lofted blade (6 x 3 root embedded 2 mm into a disk, 3 x 1.5 tip) joined to a disk and patterned 9 times round the axis as joins (31 minutes with eight retries, or \"cavity ownership is ambiguous\")",+ "source": "analytic",+ "method": "the blade is a ruled loft of two rectangles (a prismatoid): above the disk top z = 5 its section runs from 5.838 x 2.919 to 3 x 1.5; with the section area quadratic in z, V_blade = 35/6 (A(5) + 4 A(22.5) + A(40)) = 353.464. The blades stand 40 mm out on a circle and are far apart, each embedded in the disk (pi 60^2 5 = 56548.7): V = disk + 9 V_blade = 59729.8. One body.",+ "body_count": 1,+ "volume_mm3": 59729.84563167252+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1093-circular-pattern-of-a-lofted-join-blade/recipe.json b/tests/kernel-cases/sweeps/1093-circular-pattern-of-a-lofted-join-blade/recipe.jsonnew file mode 100644index 0000000000..106ff14f8c--- /dev/null+++ b/tests/kernel-cases/sweeps/1093-circular-pattern-of-a-lofted-join-blade/recipe.json@@ -0,0 +1,156 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Disk"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 60+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 5,+ "body_name": "Hub"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 3.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Root"+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 40,+ 0+ ],+ "corner": [+ 43,+ 1.5+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 40.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Tip"+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 40,+ 0+ ],+ "corner": [+ 41.5,+ 0.75+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "Root"+ },+ {+ "sketch": "Tip"+ }+ ],+ "operation": "join",+ "name": "Blade",+ "targets": [+ "Hub"+ ]+ }+ },+ {+ "command": "solid.pattern.circular",+ "params": {+ "features": [+ "Blade"+ ],+ "axis": "Z",+ "count": 9+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1140-loft-hollow-tube-bands-halved-and-joined/expected.json b/tests/kernel-cases/sweeps/1140-loft-hollow-tube-bands-halved-and-joined/expected.jsonnew file mode 100644index 0000000000..d022a9c8cd--- /dev/null+++ b/tests/kernel-cases/sweeps/1140-loft-hollow-tube-bands-halved-and-joined/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#1140"+ ],+ "what": "two hollow lofted tube bands (outer r 30, bore r 18 on R100, 5 sections each, 45 degrees each), each cut in half through its axis plane z = 0 and the halves joined into one body (\"no result\" after ten minutes of fallbacks)",+ "source": "analytic",+ "method": "the two bands meet on a shared section plane and together are the 90 degree wall: pi (30^2 - 18^2) * 100 * (pi/2), cut in half by the plane through the axis (the arc lies in z = 0, so the halves are equal): V = 1/2 * pi * 576 * 100 * pi/2 = 142122.3.",+ "body_count": 1,+ "volume_mm3": 142122.30337568675+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1140-loft-hollow-tube-bands-halved-and-joined/recipe.json b/tests/kernel-cases/sweeps/1140-loft-hollow-tube-bands-halved-and-joined/recipe.jsonnew file mode 100644index 0000000000..216790b667--- /dev/null+++ b/tests/kernel-cases/sweeps/1140-loft-hollow-tube-bands-halved-and-joined/recipe.json@@ -0,0 +1,1078 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 100.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 1.0,+ 0.0,+ 0+ ]+ },+ "name": "O0_0"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 98.07852804032305,+ 19.509032201612825,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.9807852804032304,+ 0.19509032201612825,+ 0+ ]+ },+ "name": "O0_1"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 92.38795325112868,+ 38.268343236508976,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.9238795325112867,+ 0.3826834323650898,+ 0+ ]+ },+ "name": "O0_2"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 83.14696123025452,+ 55.557023301960214,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.8314696123025452,+ 0.5555702330196022,+ 0+ ]+ },+ "name": "O0_3"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 70.71067811865476,+ 70.71067811865474,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.7071067811865476,+ 0.7071067811865475,+ 0+ ]+ },+ "name": "O0_4"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "O0_0"+ },+ {+ "sketch": "O0_1"+ },+ {+ "sketch": "O0_2"+ },+ {+ "sketch": "O0_3"+ },+ {+ "sketch": "O0_4"+ }+ ],+ "operation": "new",+ "body_name": "Out0"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 99.87502603949663,+ -4.997916927067833,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.9987502603949663,+ -0.04997916927067833,+ 0+ ]+ },+ "name": "I0_0"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 100.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 1.0,+ 0.0,+ 0+ ]+ },+ "name": "I0_1"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 98.07852804032305,+ 19.509032201612825,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.9807852804032304,+ 0.19509032201612825,+ 0+ ]+ },+ "name": "I0_2"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 92.38795325112868,+ 38.268343236508976,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.9238795325112867,+ 0.3826834323650898,+ 0+ ]+ },+ "name": "I0_3"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 83.14696123025452,+ 55.557023301960214,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.8314696123025452,+ 0.5555702330196022,+ 0+ ]+ },+ "name": "I0_4"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 70.71067811865476,+ 70.71067811865474,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.7071067811865476,+ 0.7071067811865475,+ 0+ ]+ },+ "name": "I0_5"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 67.08824723277438,+ 74.15636913464778,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.6708824723277438,+ 0.7415636913464777,+ 0+ ]+ },+ "name": "I0_6"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "I0_0"+ },+ {+ "sketch": "I0_1"+ },+ {+ "sketch": "I0_2"+ },+ {+ "sketch": "I0_3"+ },+ {+ "sketch": "I0_4"+ },+ {+ "sketch": "I0_5"+ },+ {+ "sketch": "I0_6"+ }+ ],+ "operation": "new",+ "body_name": "Bore0"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Out0",+ "tools": [+ "Bore0"+ ],+ "operation": "cut"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 600,+ "width": 600,+ "height": 100,+ "corner": [+ -300,+ -300,+ -100+ ],+ "body_name": "Under0"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Out0",+ "tools": [+ "Under0"+ ],+ "operation": "cut"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 70.71067811865476,+ 70.71067811865474,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.7071067811865476,+ 0.7071067811865475,+ 0+ ]+ },+ "name": "O1_0"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 55.55702330196023,+ 83.14696123025452,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.5555702330196023,+ 0.8314696123025452,+ 0+ ]+ },+ "name": "O1_1"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 38.26834323650898,+ 92.38795325112868,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.38268343236508984,+ 0.9238795325112867,+ 0+ ]+ },+ "name": "O1_2"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 19.509032201612833,+ 98.07852804032305,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.19509032201612833,+ 0.9807852804032304,+ 0+ ]+ },+ "name": "O1_3"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 6.123233995736766e-15,+ 100.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 6.123233995736766e-17,+ 1.0,+ 0+ ]+ },+ "name": "O1_4"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "O1_0"+ },+ {+ "sketch": "O1_1"+ },+ {+ "sketch": "O1_2"+ },+ {+ "sketch": "O1_3"+ },+ {+ "sketch": "O1_4"+ }+ ],+ "operation": "new",+ "body_name": "Out1"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 74.15636913464778,+ 67.08824723277438,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.7415636913464778,+ 0.6708824723277438,+ 0+ ]+ },+ "name": "I1_0"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 70.71067811865476,+ 70.71067811865474,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.7071067811865476,+ 0.7071067811865475,+ 0+ ]+ },+ "name": "I1_1"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 55.55702330196023,+ 83.14696123025452,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.5555702330196023,+ 0.8314696123025452,+ 0+ ]+ },+ "name": "I1_2"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 38.26834323650898,+ 92.38795325112868,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.38268343236508984,+ 0.9238795325112867,+ 0+ ]+ },+ "name": "I1_3"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 19.509032201612833,+ 98.07852804032305,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.19509032201612833,+ 0.9807852804032304,+ 0+ ]+ },+ "name": "I1_4"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 6.123233995736766e-15,+ 100.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 6.123233995736766e-17,+ 1.0,+ 0+ ]+ },+ "name": "I1_5"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ -4.997916927067831,+ 99.87502603949663,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ -0.04997916927067831,+ 0.9987502603949663,+ 0+ ]+ },+ "name": "I1_6"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "I1_0"+ },+ {+ "sketch": "I1_1"+ },+ {+ "sketch": "I1_2"+ },+ {+ "sketch": "I1_3"+ },+ {+ "sketch": "I1_4"+ },+ {+ "sketch": "I1_5"+ },+ {+ "sketch": "I1_6"+ }+ ],+ "operation": "new",+ "body_name": "Bore1"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Out1",+ "tools": [+ "Bore1"+ ],+ "operation": "cut"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 600,+ "width": 600,+ "height": 100,+ "corner": [+ -300,+ -300,+ -100+ ],+ "body_name": "Under1"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Out1",+ "tools": [+ "Under1"+ ],+ "operation": "cut"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Out0",+ "tools": [+ "Out1"+ ],+ "operation": "join"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-20deg/expected.json b/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-20deg/expected.jsonnew file mode 100644index 0000000000..c30185f2d9--- /dev/null+++ b/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-20deg/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#1391",+ "tangency-labs/solidcraft#1556"+ ],+ "what": "a half tube (6 mm wall, inner radius tapering 60 to 75 mm) lofted through 5 sections along an R300 bend of 20 degrees, with an 8 mm half-annulus flange (inner radius +3 into the wall, outer +25 beyond it) extruded from the end plane outward and joined: the flange face lies in the end plane (\"Union: no result\")",+ "source": "analytic",+ "method": "each section is a half annulus in a plane through the bend axis, centred on the path, so Pappus holds with the section area A(t) = pi/2 (12 r(t) + 36), r(t) = 60 + 15 t: V_tube = R theta * pi/2 (12 * 67.5 + 36), R = 300, theta = 20 degrees = 139161.4. The flange stands outside the tube end plane and touches the tube only along the coplanar end face, so V = V_tube + V_flange, V_flange = pi/2 (106^2 - 78^2) 8 = 64741.9. One body.",+ "body_count": 1,+ "volume_mm3": 203903.36346053838+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-20deg/recipe.json b/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-20deg/recipe.jsonnew file mode 100644index 0000000000..6da6e45277--- /dev/null+++ b/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-20deg/recipe.json@@ -0,0 +1,599 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.0,+ -1.0,+ 0+ ]+ },+ "name": "S0"+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ -66.0+ ],+ "through": [+ 66.0,+ 0+ ],+ "end": [+ 0,+ 66.0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 66.0+ ],+ [+ 0,+ 60.0+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 60.0+ ],+ "through": [+ 60.0,+ 0+ ],+ "end": [+ 0,+ -60.0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -60.0+ ],+ [+ 0,+ -66.0+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 26.146722824,+ 1.141590572,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.087155743,+ -0.996194698,+ 0+ ]+ },+ "name": "S1"+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ -69.75+ ],+ "through": [+ 69.75,+ 0+ ],+ "end": [+ 0,+ 69.75+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 69.75+ ],+ [+ 0,+ 63.75+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 63.75+ ],+ "through": [+ 63.75,+ 0+ ],+ "end": [+ 0,+ -63.75+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -63.75+ ],+ [+ 0,+ -69.75+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 52.0944533,+ 4.557674096,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.173648178,+ -0.984807753,+ 0+ ]+ },+ "name": "S2"+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ -73.5+ ],+ "through": [+ 73.5,+ 0+ ],+ "end": [+ 0,+ 73.5+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 73.5+ ],+ [+ 0,+ 67.5+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 67.5+ ],+ "through": [+ 67.5,+ 0+ ],+ "end": [+ 0,+ -67.5+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -67.5+ ],+ [+ 0,+ -73.5+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 77.645713531,+ 10.222252113,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.258819045,+ -0.965925826,+ 0+ ]+ },+ "name": "S3"+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ -77.25+ ],+ "through": [+ 77.25,+ 0+ ],+ "end": [+ 0,+ 77.25+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 77.25+ ],+ [+ 0,+ 71.25+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 71.25+ ],+ "through": [+ 71.25,+ 0+ ],+ "end": [+ 0,+ -71.25+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -71.25+ ],+ [+ 0,+ -77.25+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 102.606042998,+ 18.092213764,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.342020143,+ -0.939692621,+ 0+ ]+ },+ "name": "S4"+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ -81.0+ ],+ "through": [+ 81.0,+ 0+ ],+ "end": [+ 0,+ 81.0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 81.0+ ],+ [+ 0,+ 75.0+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 75.0+ ],+ "through": [+ 75.0,+ 0+ ],+ "end": [+ 0,+ -75.0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -75.0+ ],+ [+ 0,+ -81.0+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "S0"+ },+ {+ "sketch": "S1"+ },+ {+ "sketch": "S2"+ },+ {+ "sketch": "S3"+ },+ {+ "sketch": "S4"+ }+ ],+ "operation": "new",+ "name": "TubeLoft",+ "body_name": "Tube"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 102.606042998,+ 18.092213764,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.342020143,+ -0.939692621,+ 0+ ]+ },+ "name": "Flange"+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ -106.0+ ],+ "through": [+ 106.0,+ 0+ ],+ "end": [+ 0,+ 106.0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 106.0+ ],+ [+ 0,+ 78.0+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 78.0+ ],+ "through": [+ 78.0,+ 0+ ],+ "end": [+ 0,+ -78.0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -78.0+ ],+ [+ 0,+ -106.0+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Flange",+ "distance": 8.0,+ "operation": "join",+ "targets": [+ "Tube"+ ],+ "name": "JoinFlange"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg/expected.json b/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg/expected.jsonnew file mode 100644index 0000000000..89fba1fe93--- /dev/null+++ b/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#1391",+ "tangency-labs/solidcraft#1556"+ ],+ "what": "a half tube (6 mm wall, inner radius tapering 60 to 75 mm) lofted through 5 sections along an R300 bend of 40 degrees, with an 8 mm half-annulus flange (inner radius +3 into the wall, outer +25 beyond it) extruded from the end plane outward and joined: the flange face lies in the end plane (\"Union: no result\")",+ "source": "analytic",+ "method": "each section is a half annulus in a plane through the bend axis, centred on the path, so Pappus holds with the section area A(t) = pi/2 (12 r(t) + 36), r(t) = 60 + 15 t: V_tube = R theta * pi/2 (12 * 67.5 + 36), R = 300, theta = 40 degrees = 278322.8. The flange stands outside the tube end plane and touches the tube only along the coplanar end face, so V = V_tube + V_flange, V_flange = pi/2 (106^2 - 78^2) 8 = 64741.9. One body.",+ "body_count": 1,+ "volume_mm3": 343064.7855158983+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg/recipe.json b/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg/recipe.jsonnew file mode 100644index 0000000000..b60b9bf85a--- /dev/null+++ b/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg/recipe.json@@ -0,0 +1,599 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.0,+ -1.0,+ 0+ ]+ },+ "name": "S0"+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ -66.0+ ],+ "through": [+ 66.0,+ 0+ ],+ "end": [+ 0,+ 66.0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 66.0+ ],+ [+ 0,+ 60.0+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 60.0+ ],+ "through": [+ 60.0,+ 0+ ],+ "end": [+ 0,+ -60.0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -60.0+ ],+ [+ 0,+ -66.0+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 52.0944533,+ 4.557674096,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.173648178,+ -0.984807753,+ 0+ ]+ },+ "name": "S1"+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ -69.75+ ],+ "through": [+ 69.75,+ 0+ ],+ "end": [+ 0,+ 69.75+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 69.75+ ],+ [+ 0,+ 63.75+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 63.75+ ],+ "through": [+ 63.75,+ 0+ ],+ "end": [+ 0,+ -63.75+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -63.75+ ],+ [+ 0,+ -69.75+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 102.606042998,+ 18.092213764,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.342020143,+ -0.939692621,+ 0+ ]+ },+ "name": "S2"+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ -73.5+ ],+ "through": [+ 73.5,+ 0+ ],+ "end": [+ 0,+ 73.5+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 73.5+ ],+ [+ 0,+ 67.5+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 67.5+ ],+ "through": [+ 67.5,+ 0+ ],+ "end": [+ 0,+ -67.5+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -67.5+ ],+ [+ 0,+ -73.5+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 150.0,+ 40.192378865,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.5,+ -0.866025404,+ 0+ ]+ },+ "name": "S3"+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ -77.25+ ],+ "through": [+ 77.25,+ 0+ ],+ "end": [+ 0,+ 77.25+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 77.25+ ],+ [+ 0,+ 71.25+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 71.25+ ],+ "through": [+ 71.25,+ 0+ ],+ "end": [+ 0,+ -71.25+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -71.25+ ],+ [+ 0,+ -77.25+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 192.836282906,+ 70.186667064,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.64278761,+ -0.766044443,+ 0+ ]+ },+ "name": "S4"+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ -81.0+ ],+ "through": [+ 81.0,+ 0+ ],+ "end": [+ 0,+ 81.0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 81.0+ ],+ [+ 0,+ 75.0+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 75.0+ ],+ "through": [+ 75.0,+ 0+ ],+ "end": [+ 0,+ -75.0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -75.0+ ],+ [+ 0,+ -81.0+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "S0"+ },+ {+ "sketch": "S1"+ },+ {+ "sketch": "S2"+ },+ {+ "sketch": "S3"+ },+ {+ "sketch": "S4"+ }+ ],+ "operation": "new",+ "name": "TubeLoft",+ "body_name": "Tube"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 192.836282906,+ 70.186667064,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.64278761,+ -0.766044443,+ 0+ ]+ },+ "name": "Flange"+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ -106.0+ ],+ "through": [+ 106.0,+ 0+ ],+ "end": [+ 0,+ 106.0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 106.0+ ],+ [+ 0,+ 78.0+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 78.0+ ],+ "through": [+ 78.0,+ 0+ ],+ "end": [+ 0,+ -78.0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -78.0+ ],+ [+ 0,+ -106.0+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Flange",+ "distance": 8.0,+ "operation": "join",+ "targets": [+ "Tube"+ ],+ "name": "JoinFlange"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1490-loft-joined-into-a-window-of-a-wall-that-it-overhangs/expected.json b/tests/kernel-cases/sweeps/1490-loft-joined-into-a-window-of-a-wall-that-it-overhangs/expected.jsonnew file mode 100644index 0000000000..1ccd43fae9--- /dev/null+++ b/tests/kernel-cases/sweeps/1490-loft-joined-into-a-window-of-a-wall-that-it-overhangs/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#1490"+ ],+ "what": "a wall 2.5 mm thick with a 30 x 20 window cut through it and a loft (34 x 24 growing to 38 x 28 over 3.5 mm) joined into the window so that its strips overhang the wall on both faces (\"Union: no result\" at some wall thicknesses)",+ "source": "analytic",+ "method": "the loft section is larger than the window at every depth inside the wall, and lies inside the wall face, so inside the 2.5 mm slab the window is filled and nothing else changes: the body is the plain 2.5 x 60 x 40 wall (6000) plus the two overhanging strips of the loft, x from -0.5 to 0 and from 2.5 to 3.0, of area w(x) h(x) with w = 34 + 4 (x + 0.5)/3.5 and h = 24 + 4 (x + 0.5)/3.5: V = 6000 + 938.966.",+ "body_count": 1,+ "volume_mm3": 6938.965986394556+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1490-loft-joined-into-a-window-of-a-wall-that-it-overhangs/recipe.json b/tests/kernel-cases/sweeps/1490-loft-joined-into-a-window-of-a-wall-that-it-overhangs/recipe.jsonnew file mode 100644index 0000000000..7291c4bdd6--- /dev/null+++ b/tests/kernel-cases/sweeps/1490-loft-joined-into-a-window-of-a-wall-that-it-overhangs/recipe.json@@ -0,0 +1,168 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 2.5,+ "width": 60,+ "height": 40,+ "corner": [+ 0,+ -30,+ 0+ ],+ "body_name": "Wall"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ -1.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Win"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -15,+ 10+ ],+ "p1": [+ 15,+ 30+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Win",+ "distance": 5,+ "operation": "cut",+ "targets": [+ "Wall"+ ],+ "name": "PleatCut"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ -0.5,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Near"+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 0,+ 20+ ],+ "corner": [+ 17,+ 32+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 3.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Far"+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 0,+ 20+ ],+ "corner": [+ 19,+ 34+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "Near"+ },+ {+ "sketch": "Far"+ }+ ],+ "operation": "join",+ "name": "PleatNear",+ "targets": [+ "Wall"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1669-mirrored-window-and-loft-on-a-hollow-case/expected.json b/tests/kernel-cases/sweeps/1669-mirrored-window-and-loft-on-a-hollow-case/expected.jsonnew file mode 100644index 0000000000..7925000d9f--- /dev/null+++ b/tests/kernel-cases/sweeps/1669-mirrored-window-and-loft-on-a-hollow-case/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#1669"+ ],+ "what": "a closed hollow box (60 x 60 x 40, 2.5 mm walls) with a window cut in one end wall and a loft joined into it, both mirrored about the middle plane x = 30 onto the far wall (\"Union: no result\" on the mirror only)",+ "source": "analytic",+ "method": "as for one wall: each window is filled by its loft (the loft section is larger than the window), and what is added to the plain hollow case (60 x 60 x 40 minus the 55 x 55 x 35 cavity = 38125) is the overhanging strip of the loft outside the wall (x in [-0.5, 0]) and the strip inside the cavity (x in [2.5, 3]), 938.966 each; the mirror gives the far wall the same: V = 38125 + 2 * 938.966. The windows are filled again, so the cavity is sealed (an internal void: shell count 2, which the rig cannot grade, so valid is false).",+ "valid": false,+ "body_count": 1,+ "volume_mm3": 40002.93197278911+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1669-mirrored-window-and-loft-on-a-hollow-case/recipe.json b/tests/kernel-cases/sweeps/1669-mirrored-window-and-loft-on-a-hollow-case/recipe.jsonnew file mode 100644index 0000000000..bec7d49745--- /dev/null+++ b/tests/kernel-cases/sweeps/1669-mirrored-window-and-loft-on-a-hollow-case/recipe.json@@ -0,0 +1,214 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 60,+ "width": 60,+ "height": 40,+ "corner": [+ 0,+ -30,+ 0+ ],+ "body_name": "Case"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 55,+ "width": 55,+ "height": 35,+ "corner": [+ 2.5,+ -27.5,+ 2.5+ ],+ "body_name": "Cavity"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Case",+ "tools": [+ "Cavity"+ ],+ "operation": "cut",+ "name": "Hollow"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ -1.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Win"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -15,+ 10+ ],+ "p1": [+ 15,+ 30+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Win",+ "distance": 3.5,+ "operation": "cut",+ "targets": [+ "Case"+ ],+ "name": "PleatCut"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ -0.5,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Near"+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 0,+ 20+ ],+ "corner": [+ 17,+ 32+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 3.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Far"+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 0,+ 20+ ],+ "corner": [+ 19,+ 34+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "Near"+ },+ {+ "sketch": "Far"+ }+ ],+ "operation": "join",+ "name": "PleatNear",+ "targets": [+ "Case"+ ]+ }+ },+ {+ "command": "solid.mirror",+ "params": {+ "features": [+ "PleatCut",+ "PleatNear"+ ],+ "plane": {+ "origin": [+ 30,+ 0,+ 0+ ],+ "normal": [+ 1,+ 0,+ 0+ ]+ }+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1856-disk-and-36-twisted-lofted-blades-joined/expected.json b/tests/kernel-cases/sweeps/1856-disk-and-36-twisted-lofted-blades-joined/expected.jsonnew file mode 100644index 0000000000..7d06c9658e--- /dev/null+++ b/tests/kernel-cases/sweeps/1856-disk-and-36-twisted-lofted-blades-joined/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#2992",+ "tangency-labs/solidcraft#1856"+ ],+ "what": "a disk joined to 36 patterned twisted lofted blades (each a loft of 9 rectangle sections turning 7.5 degrees apart, rooted 2 mm inside the disk): hang of minutes",+ "source": "analytic",+ "method": "each blade section is a 6 x 3 rectangle (area 18) turning about its own centre, which stays on the vertical line at radius 50: the section area and centre do not change, so a blade above the disk top z = 5 is 18 * (43 - 5) = 684 and its root part is inside the disk. The 36 blades (centres 8.7 apart, reach 3.4 each) do not touch each other, so V = pi 60^2 5 + 36 * 684 = 81172.7.",+ "body_count": 1,+ "volume_mm3": 81172.66776461627+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1856-disk-and-36-twisted-lofted-blades-joined/recipe.json b/tests/kernel-cases/sweeps/1856-disk-and-36-twisted-lofted-blades-joined/recipe.jsonnew file mode 100644index 0000000000..0d89b1dc4a--- /dev/null+++ b/tests/kernel-cases/sweeps/1856-disk-and-36-twisted-lofted-blades-joined/recipe.json@@ -0,0 +1,565 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Disk"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 60+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 5,+ "body_name": "Disk"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 3.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B0"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 47.0,+ -1.5+ ],+ [+ 53.0,+ -1.5+ ],+ [+ 53.0,+ 1.5+ ],+ [+ 47.0,+ 1.5+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 8.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B1"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 47.221454704,+ -1.878745869+ ],+ [+ 53.170123872,+ -1.095588715+ ],+ [+ 52.778545296,+ 1.878745869+ ],+ [+ 46.829876128,+ 1.095588715+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 13.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B2"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 47.490451089,+ -2.225345875+ ],+ [+ 53.286006047,+ -0.672431604+ ],+ [+ 52.509548911,+ 2.225345875+ ],+ [+ 46.713993953,+ 0.672431604+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 18.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B3"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 47.802386551,+ -2.533869596+ ],+ [+ 53.345663746,+ -0.237769002+ ],+ [+ 52.197613449,+ 2.533869596+ ],+ [+ 46.654336254,+ 0.237769002+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 23.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B4"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 48.151923789,+ -2.799038106+ ],+ [+ 53.348076211,+ 0.200961894+ ],+ [+ 51.848076211,+ 2.799038106+ ],+ [+ 46.651923789,+ -0.200961894+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 28.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B5"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 48.533082123,+ -3.016314297+ ],+ [+ 53.293202164,+ 0.636254277+ ],+ [+ 51.466917877,+ 3.016314297+ ],+ [+ 46.706797836,+ -0.636254277+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 33.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B6"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 48.939339828,+ -3.181980515+ ],+ [+ 53.181980515,+ 1.060660172+ ],+ [+ 51.060660172,+ 3.181980515+ ],+ [+ 46.818019485,+ -1.060660172+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 38.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B7"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 49.363745723,+ -3.293202164+ ],+ [+ 53.016314297,+ 1.466917877+ ],+ [+ 50.636254277,+ 3.293202164+ ],+ [+ 46.983685703,+ -1.466917877+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 43.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B8"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 49.799038106,+ -3.348076211+ ],+ [+ 52.799038106,+ 1.848076211+ ],+ [+ 50.200961894,+ 3.348076211+ ],+ [+ 47.200961894,+ -1.848076211+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "B0"+ },+ {+ "sketch": "B1"+ },+ {+ "sketch": "B2"+ },+ {+ "sketch": "B3"+ },+ {+ "sketch": "B4"+ },+ {+ "sketch": "B5"+ },+ {+ "sketch": "B6"+ },+ {+ "sketch": "B7"+ },+ {+ "sketch": "B8"+ }+ ],+ "operation": "join",+ "name": "Blade",+ "targets": [+ "Disk"+ ]+ }+ },+ {+ "command": "solid.pattern.circular",+ "params": {+ "features": [+ "Blade"+ ],+ "axis": "Z",+ "count": 36+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/968-loft-hollow-elbow-60deg-5sections/expected.json b/tests/kernel-cases/sweeps/968-loft-hollow-elbow-60deg-5sections/expected.jsonnew file mode 100644index 0000000000..4844d8d56f--- /dev/null+++ b/tests/kernel-cases/sweeps/968-loft-hollow-elbow-60deg-5sections/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#968",+ "tangency-labs/solidcraft#1084"+ ],+ "what": "a bent tube (circles r 30 lofted through 5 sections along an R100 arc turning 60 degrees) with a bore (r 18, sections running 5 mm of arc past both ends) cut out of it: a hollow elbow (\"no result\" for some section counts, not their neighbours)",+ "source": "analytic",+ "method": "the wall of a bent tube is a ring section turned about the bend axis, its centre at radius 100: Pappus V = pi (30^2 - 18^2) * 100 * theta with theta = 60 degrees = 189496.4. The bore overshoots both ends along the same arc, so the cut opens the ends and leaves exactly the wall.",+ "body_count": 1,+ "volume_mm3": 189496.40450091567+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/968-loft-hollow-elbow-60deg-5sections/recipe.json b/tests/kernel-cases/sweeps/968-loft-hollow-elbow-60deg-5sections/recipe.jsonnew file mode 100644index 0000000000..506c5674d6--- /dev/null+++ b/tests/kernel-cases/sweeps/968-loft-hollow-elbow-60deg-5sections/recipe.json@@ -0,0 +1,515 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 100.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 1.0,+ 0.0,+ 0+ ]+ },+ "name": "O0"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 96.59258262890683,+ 25.881904510252074,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.9659258262890683,+ 0.25881904510252074,+ 0+ ]+ },+ "name": "O1"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 86.60254037844388,+ 49.99999999999999,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.8660254037844387,+ 0.49999999999999994,+ 0+ ]+ },+ "name": "O2"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 70.71067811865476,+ 70.71067811865474,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.7071067811865476,+ 0.7071067811865475,+ 0+ ]+ },+ "name": "O3"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 50.000000000000014,+ 86.60254037844386,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.5000000000000001,+ 0.8660254037844386,+ 0+ ]+ },+ "name": "O4"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "O0"+ },+ {+ "sketch": "O1"+ },+ {+ "sketch": "O2"+ },+ {+ "sketch": "O3"+ },+ {+ "sketch": "O4"+ }+ ],+ "operation": "new",+ "name": "LoftO",+ "body_name": "TubeO"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 99.87502603949663,+ -4.997916927067833,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.9987502603949663,+ -0.04997916927067833,+ 0+ ]+ },+ "name": "I0"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 100.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 1.0,+ 0.0,+ 0+ ]+ },+ "name": "I1"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 96.59258262890683,+ 25.881904510252074,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.9659258262890683,+ 0.25881904510252074,+ 0+ ]+ },+ "name": "I2"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 86.60254037844388,+ 49.99999999999999,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.8660254037844387,+ 0.49999999999999994,+ 0+ ]+ },+ "name": "I3"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 70.71067811865476,+ 70.71067811865474,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.7071067811865476,+ 0.7071067811865475,+ 0+ ]+ },+ "name": "I4"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 50.000000000000014,+ 86.60254037844386,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.5000000000000001,+ 0.8660254037844386,+ 0+ ]+ },+ "name": "I5"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 45.60918999490332,+ 88.9932682173703,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.45609189994903315,+ 0.889932682173703,+ 0+ ]+ },+ "name": "I6"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "I0"+ },+ {+ "sketch": "I1"+ },+ {+ "sketch": "I2"+ },+ {+ "sketch": "I3"+ },+ {+ "sketch": "I4"+ },+ {+ "sketch": "I5"+ },+ {+ "sketch": "I6"+ }+ ],+ "operation": "new",+ "name": "LoftI",+ "body_name": "TubeI"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "TubeO",+ "tools": [+ "TubeI"+ ],+ "operation": "cut",+ "name": "Hollow"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/968-loft-hollow-elbow-90deg-10sections/expected.json b/tests/kernel-cases/sweeps/968-loft-hollow-elbow-90deg-10sections/expected.jsonnew file mode 100644index 0000000000..b596f5d42d--- /dev/null+++ b/tests/kernel-cases/sweeps/968-loft-hollow-elbow-90deg-10sections/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#968",+ "tangency-labs/solidcraft#1084"+ ],+ "what": "a bent tube (circles r 30 lofted through 10 sections along an R100 arc turning 90 degrees) with a bore (r 18, sections running 5 mm of arc past both ends) cut out of it: a hollow elbow (\"no result\" for some section counts, not their neighbours)",+ "source": "analytic",+ "method": "the wall of a bent tube is a ring section turned about the bend axis, its centre at radius 100: Pappus V = pi (30^2 - 18^2) * 100 * theta with theta = 90 degrees = 284244.6. The bore overshoots both ends along the same arc, so the cut opens the ends and leaves exactly the wall.",+ "body_count": 1,+ "volume_mm3": 284244.6067513735+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/968-loft-hollow-elbow-90deg-10sections/recipe.json b/tests/kernel-cases/sweeps/968-loft-hollow-elbow-90deg-10sections/recipe.jsonnew file mode 100644index 0000000000..f93d37168e--- /dev/null+++ b/tests/kernel-cases/sweeps/968-loft-hollow-elbow-90deg-10sections/recipe.json@@ -0,0 +1,915 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 100.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 1.0,+ 0.0,+ 0+ ]+ },+ "name": "O0"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 98.4807753012208,+ 17.364817766693033,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.984807753012208,+ 0.17364817766693033,+ 0+ ]+ },+ "name": "O1"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 93.96926207859084,+ 34.20201433256687,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.9396926207859084,+ 0.3420201433256687,+ 0+ ]+ },+ "name": "O2"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 86.60254037844388,+ 49.99999999999999,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.8660254037844387,+ 0.49999999999999994,+ 0+ ]+ },+ "name": "O3"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 76.60444431189781,+ 64.27876096865393,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.766044443118978,+ 0.6427876096865393,+ 0+ ]+ },+ "name": "O4"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 64.27876096865394,+ 76.60444431189781,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.6427876096865394,+ 0.766044443118978,+ 0+ ]+ },+ "name": "O5"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 50.000000000000014,+ 86.60254037844386,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.5000000000000001,+ 0.8660254037844386,+ 0+ ]+ },+ "name": "O6"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 34.20201433256688,+ 93.96926207859083,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.3420201433256688,+ 0.9396926207859083,+ 0+ ]+ },+ "name": "O7"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 17.36481776669304,+ 98.4807753012208,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.17364817766693041,+ 0.984807753012208,+ 0+ ]+ },+ "name": "O8"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 6.123233995736766e-15,+ 100.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 6.123233995736766e-17,+ 1.0,+ 0+ ]+ },+ "name": "O9"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "O0"+ },+ {+ "sketch": "O1"+ },+ {+ "sketch": "O2"+ },+ {+ "sketch": "O3"+ },+ {+ "sketch": "O4"+ },+ {+ "sketch": "O5"+ },+ {+ "sketch": "O6"+ },+ {+ "sketch": "O7"+ },+ {+ "sketch": "O8"+ },+ {+ "sketch": "O9"+ }+ ],+ "operation": "new",+ "name": "LoftO",+ "body_name": "TubeO"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 99.87502603949663,+ -4.997916927067833,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.9987502603949663,+ -0.04997916927067833,+ 0+ ]+ },+ "name": "I0"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 100.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 1.0,+ 0.0,+ 0+ ]+ },+ "name": "I1"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 98.4807753012208,+ 17.364817766693033,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.984807753012208,+ 0.17364817766693033,+ 0+ ]+ },+ "name": "I2"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 93.96926207859084,+ 34.20201433256687,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.9396926207859084,+ 0.3420201433256687,+ 0+ ]+ },+ "name": "I3"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 86.60254037844388,+ 49.99999999999999,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.8660254037844387,+ 0.49999999999999994,+ 0+ ]+ },+ "name": "I4"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 76.60444431189781,+ 64.27876096865393,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.766044443118978,+ 0.6427876096865393,+ 0+ ]+ },+ "name": "I5"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 64.27876096865394,+ 76.60444431189781,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.6427876096865394,+ 0.766044443118978,+ 0+ ]+ },+ "name": "I6"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 50.000000000000014,+ 86.60254037844386,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.5000000000000001,+ 0.8660254037844386,+ 0+ ]+ },+ "name": "I7"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 34.20201433256688,+ 93.96926207859083,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.3420201433256688,+ 0.9396926207859083,+ 0+ ]+ },+ "name": "I8"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 17.36481776669304,+ 98.4807753012208,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 0.17364817766693041,+ 0.984807753012208,+ 0+ ]+ },+ "name": "I9"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 6.123233995736766e-15,+ 100.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ 6.123233995736766e-17,+ 1.0,+ 0+ ]+ },+ "name": "I10"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ -4.997916927067831,+ 99.87502603949663,+ 0.0+ ],+ "x_dir": [+ 0,+ 0,+ 1+ ],+ "y_dir": [+ -0.04997916927067831,+ 0.9987502603949663,+ 0+ ]+ },+ "name": "I11"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 18.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "I0"+ },+ {+ "sketch": "I1"+ },+ {+ "sketch": "I2"+ },+ {+ "sketch": "I3"+ },+ {+ "sketch": "I4"+ },+ {+ "sketch": "I5"+ },+ {+ "sketch": "I6"+ },+ {+ "sketch": "I7"+ },+ {+ "sketch": "I8"+ },+ {+ "sketch": "I9"+ },+ {+ "sketch": "I10"+ },+ {+ "sketch": "I11"+ }+ ],+ "operation": "new",+ "name": "LoftI",+ "body_name": "TubeI"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "TubeO",+ "tools": [+ "TubeI"+ ],+ "operation": "cut",+ "name": "Hollow"+ }+ }+ ]+}\ No newline at end of file