SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 397/509: Tests: convex blends past a cliff are cut from the part, as the owner decided (and 3 more)
jyviko5cd36d55e12e
diff --git a/crates/doc/src/eval.rs b/crates/doc/src/eval.rsindex efcd233ab7..a16f2ef037 100644--- a/crates/doc/src/eval.rs+++ b/crates/doc/src/eval.rs@@ -390,7 +390,8 @@ pub struct SolvedSketch {/// A constant fillet of `edges`; with [`FilletFit::Reduce`](crate::FilletFit::Reduce), a radius too/// large for the geometry around them is reduced where it doesn't fit, to the largest that works/// for each group of edges sharing a face; the radius per edge is returned. With-/// [`FilletFit::Taper`](crate::FilletFit::Taper) it tapers along each edge it doesn't fit.+/// [`FilletFit::Taper`](crate::FilletFit::Taper) it tapers along each edge it doesn't fit. With+/// the exact fit a radius too large is refused, naming the largest that fits ([`with_largest_fit`]).fn fillet_fitted(body: &kernel::Body,edges: &[Vec3],@@ -398,6 +399,9 @@ fn fillet_fitted(fit: crate::FilletFit,) -> std::result::Result<(kernel::Body, Option<Vec<f64>>), kernel::KernelError> {match kernel::fillet(body, edges, r) {+ Err(kernel::KernelError::TooLarge(why)) if fit == crate::FilletFit::Exact => {+ Err(with_largest_fit(why, "radius", || kernel::fillet_max(body, edges, r)))+ }Err(kernel::KernelError::TooLarge(why)) if fit == crate::FilletFit::Reduce => match kernel::fillet_max_each(body, edges, r)? {// Built at the radius asked for after all (the groups apart): nothing reduced.Some((used, b)) => Ok((b, used.iter().any(|u| *u < r).then_some(used))),@@ -408,6 +412,25 @@ fn fillet_fitted(}}+/// A blend's refusal as too large (`why`) with the largest `size` (radius, distance) that fits,+/// as `search` finds it by building candidates ([`kernel::fillet_max`]): the refusal as it is+/// when none fits or the search itself fails (a candidate failing for another reason says+/// nothing about the size).+fn with_largest_fit(+ why: String,+ size: &str,+ search: impl FnOnce() -> std::result::Result<Option<(f64, kernel::Body)>, kernel::KernelError>,+) -> kernel::KernelError {+ match search() {+ Ok(Some((largest, _))) => kernel::KernelError::TooLarge(format!("{why}; the largest {size} that fits is {} mm", show_mm(largest))),+ Ok(None) => kernel::KernelError::TooLarge(why),+ Err(e) => {+ log::debug!("the largest {size} that fits: {e}");+ kernel::KernelError::TooLarge(why)+ }+ }+}+/// The warning of a fillet whose radius `asked` was reduced to `used` (per edge).fn reduced_note(used: &[f64], asked: f64) -> String {let mut values: Vec<f64> = used.iter().copied().filter(|r| *r < asked).collect();@@ -6298,7 +6321,10 @@ fn chamfer_with(};Ok(match side {Some(s) => kernel::chamfer_sides(b, edges, d, s, flip)?,- None => kernel::chamfer(b, edges, d)?,+ None => match kernel::chamfer(b, edges, d) {+ Err(kernel::KernelError::TooLarge(why)) => return Err(with_largest_fit(why, "distance", || kernel::chamfer_max(b, edges, d)).into()),+ other => other?,+ },})}diff --git a/crates/engine/src/cmd/features.rs b/crates/engine/src/cmd/features.rsindex 79008ecc58..862ae25339 100644--- a/crates/engine/src/cmd/features.rs+++ b/crates/engine/src/cmd/features.rs@@ -49,7 +49,7 @@ pub static COMMANDS: &[CommandSpec] = &[.at("SOLID", "MODIFY").icon("fillet").key("F")- .params("edges: [[x,y,z] point on edge | {body, index}] ; radius: expr; tangent_chain?: bool (default true: each picked edge's tangent chain is rounded with it; false: exactly the picked edges); body?; type?: constant|curvature (alias g2: curvature-continuous quintic between planar faces along straight edges, one planar end face at each end (including sloped ends); radius sets the equivalent circular setback, not constant curvature; exact fit only)|chord (radius is the width across)|variable (radius at the end nearest start, radius2 at the other; one end may be 0, where the round closes to the corner)|spline (the radius along the edge is a clamped B-spline from the end nearest start: radius is its first control radius, radii the rest, knots its knot vector from 0 to 1; one end may be 0); radius2?; start?: [x,y,z]; radii?: [expr, …]; knots?: [number, …]; mid?: [[position 0…1 from start, radius expr], …] (variable radii between the ends); smooth?: bool (smooth instead of straight between the radii); corner?: rolling|g2 (rolling, the default: the corners where three blended edges meet are pieces of the rolling ball's sphere, tangent to each blend; g2: each corner where three or more rounded edges meet, and every edge there is rounded, is set back (1.5 × the radius along each edge unless `setbacks` names it) and filled with a patch meeting the rounds and the faces round it to the second order (curvature-continuous seams, clear of the points where a round's section ends on a face), constant-radius exact fillets only, refused where it cannot be built); setbacks?: [{vertex: [x,y,z], distance: expr}, …] (corner setbacks: the corner at the vertex nearest `vertex`, where every edge meeting it is rounded, starts its patch `distance` along each of those edges from the vertex, past where the rounds would meet (past the radius at a square corner), so the rounds blend through a larger patch; one distance for all of a corner's edges; constant-radius exact fillets only; with `corner: g2`, the G2 patch's corners); fit?: exact|reduce|taper (exact, the default: a radius too large for the geometry around the edges is refused; reduce: where it doesn't fit it is reduced to the largest that does, one radius for edges sharing a face; the smallest used is returned as `radius_applied`, each edge's as `radii_applied: [{edge: [x,y,z], radius}]`, and noted in the feature's warning; taper: along each straight edge between planar faces where it doesn't fit, the radius follows the room there as a smooth spline, down to 0 where a face closes to a point, noted in the feature's warning)"),+ .params("edges: [[x,y,z] point on edge | {body, index}] ; radius: expr; tangent_chain?: bool (default true: each picked edge's tangent chain is rounded with it; false: exactly the picked edges); body?; type?: constant|curvature (alias g2: curvature-continuous quintic between planar faces along straight edges, one planar end face at each end (including sloped ends); radius sets the equivalent circular setback, not constant curvature; exact fit only)|chord (radius is the width across)|variable (radius at the end nearest start, radius2 at the other; one end may be 0, where the round closes to the corner)|spline (the radius along the edge is a clamped B-spline from the end nearest start: radius is its first control radius, radii the rest, knots its knot vector from 0 to 1; one end may be 0); radius2?; start?: [x,y,z]; radii?: [expr, …]; knots?: [number, …]; mid?: [[position 0…1 from start, radius expr], …] (variable radii between the ends); smooth?: bool (smooth instead of straight between the radii); corner?: rolling|g2 (rolling, the default: the corners where three blended edges meet are pieces of the rolling ball's sphere, tangent to each blend; g2: each corner where three or more rounded edges meet, and every edge there is rounded, is set back (1.5 × the radius along each edge unless `setbacks` names it) and filled with a patch meeting the rounds and the faces round it to the second order (curvature-continuous seams, clear of the points where a round's section ends on a face), constant-radius exact fillets only, refused where it cannot be built); setbacks?: [{vertex: [x,y,z], distance: expr}, …] (corner setbacks: the corner at the vertex nearest `vertex`, where every edge meeting it is rounded, starts its patch `distance` along each of those edges from the vertex, past where the rounds would meet (past the radius at a square corner), so the rounds blend through a larger patch; one distance for all of a corner's edges; constant-radius exact fillets only; with `corner: g2`, the G2 patch's corners); fit?: exact|reduce|taper (exact, the default: a radius too large for the geometry around the edges is refused, naming the largest that fits; reduce: where it doesn't fit it is reduced to the largest that does, one radius for edges sharing a face; the smallest used is returned as `radius_applied`, each edge's as `radii_applied: [{edge: [x,y,z], radius}]`, and noted in the feature's warning; taper: along each straight edge between planar faces where it doesn't fit, the radius follows the room there as a smooth spline, down to 0 where a face closes to a point, noted in the feature's warning)"),CommandSpec::new("solid.chamfer", "Chamfer", chamfer).at("SOLID", "MODIFY").icon("chamfer").params("edges: [[x,y,z] | {body, index}] ; distance: expr; tangent_chain?: bool (default true: each picked edge's tangent chain is cut with it; false: exactly the picked edges); distance2?: expr (along the second face) | angle?: expr (from the first face); flip?: bool (which face is first: by default the one facing up most); body?"),CommandSpec::new("solid.combine", "Combine", combine).at("SOLID", "MODIFY").icon("combine").params("target: body; tools: [body]; operation?: join|cut|intersect; touching?: separate|one_body (what a join makes of pieces that share no face: separate, the default, makes each piece that touches another only along an edge or at a point a body of its own and keeps pieces that touch nothing in one body; one_body keeps every piece in one body); keep_tools?: bool; new_component?: bool (the result goes into a new component; component_name?)"),CommandSpec::new("solid.pattern.rectangular", "Rectangular Pattern", pattern_rect)diff --git a/crates/engine/src/tests.rs b/crates/engine/src/tests.rsindex 4087cd8ff7..552184c7b2 100644--- a/crates/engine/src/tests.rs+++ b/crates/engine/src/tests.rs@@ -3983,7 +3983,9 @@ fn fillet_fit_reduce_uses_the_largest_radius_that_fits() {run(&mut s, "parameters.add", json!({"name": "w", "expression": "6 mm"}));run(&mut s, "solid.box", json!({"length": 14, "width": "w", "height": 10, "corner": [14, 0, 0]}));let mids = json!([[14, 0, 5], [28, 0, 5], [14, 6, 5], [28, 6, 5]]);- assert!(s.execute("solid.fillet", &json!({"edges": mids, "radius": 3.5})).is_err());+ // The exact fit refuses it, naming the largest radius that fits.+ let e = s.execute("solid.fillet", &json!({"edges": mids, "radius": 3.5})).unwrap_err().to_string();+ assert!(e.contains("the largest radius that fits is 3 mm"), "{e}");let out = run(&mut s, "solid.fillet", json!({"edges": mids, "radius": 3.5, "fit": "reduce", "name": "Round"}));assert_eq!(out["radius_applied"].as_f64(), Some(3.0), "{out}");let full = 840.0 - (4.0 - PI) * 9.0 * 10.0;diff --git a/crates/engine/src/tests/blend_fit.rs b/crates/engine/src/tests/blend_fit.rsindex e25275b528..e0af9c813f 100644--- a/crates/engine/src/tests/blend_fit.rs+++ b/crates/engine/src/tests/blend_fit.rs@@ -1,5 +1,6 @@-//! #1080: a fillet or chamfer too large for the geometry beside its edge is refused, naming the-//! largest size that fits, and one that fits still builds.+//! #1080: a fillet or chamfer running past the faces beside its edge into an opening is built+//! as if the faces went on and cut by the opening (the blend-overflow decision, 237f0ae74), so it+//! never bridges it; one that stops short builds as it always did.use std::path::Path;@@ -21,15 +22,14 @@ fn chamfer_error(s: &Session) -> Option<String> {/// The report's design: a 20 mm cube with a 10 mm square opening into each of three faces,/// then a 9 mm chamfer on the top edge over one side opening. The openings are 5 mm from the-/// edge, so the chamfer would cut through their rims. It is refused, naming 5 mm, and the part-/// is left as it was.+/// edge, so the chamfer runs over their rims: it is cut by them. Of its section, the triangle+/// y + (20 − z) <= 9 (area 40.5, along 20: 810), the two openings crossing it hold 80 each+/// (the rig's fillets/1080-chamfer-runs-into-openings-refused): 4000 − (810 − 160) = 3350.#[test]-fn chamfer_through_the_openings_is_refused() {+fn chamfer_through_the_openings_is_cut_by_them() {let mut s = open_fixture();- let err = chamfer_error(&s).expect("the 9 mm chamfer cuts through two openings: it must be refused");- assert!(err.contains("runs past the faces beside the edge"), "{err}");- assert!(err.contains("the largest size that fits is 5 mm"), "{err}");- assert!((volume(&mut s) - 4000.0).abs() < 1e-6, "the part stays as it was without the chamfer");+ assert_eq!(chamfer_error(&s), None);+ assert!((volume(&mut s) - 3350.0).abs() < 1e-6, "{}", volume(&mut s));}/// Sizes that stop short of the openings build, and take away exactly the chamfer's triangle@@ -44,3 +44,17 @@ fn chamfer_that_fits_still_builds() {assert!((volume(&mut s) - want).abs() < 1e-6, "{d} mm: {} (want {want})", volume(&mut s));}}++/// A rib 4 mm wide: blends of its two top edges meet in its top's middle at 2 mm and past that+/// would cross each other. Refused as too large, naming the largest size that fits.+#[test]+fn blends_crossing_each_other_are_refused_naming_the_largest_that_fits() {+ let mut s = Session::default();+ run(&mut s, "solid.box", json!({"length": 40, "width": 4, "height": 20}));+ let edges = json!([[20, 0, 20], [20, 4, 20]]);+ let e = s.execute("solid.chamfer", &json!({"edges": edges, "distance": 3})).unwrap_err().to_string();+ assert!(e.contains("the largest distance that fits is 2 mm"), "{e}");+ let e = s.execute("solid.fillet", &json!({"edges": edges, "radius": 3})).unwrap_err().to_string();+ assert!(e.contains("the largest radius that fits is 2 mm"), "{e}");+ assert!((volume(&mut s) - 3200.0).abs() < 1e-6, "the part stays as it was");+}diff --git a/crates/kernel/src/blend.rs b/crates/kernel/src/blend.rsindex 5098f69f98..512564fe52 100644--- a/crates/kernel/src/blend.rs+++ b/crates/kernel/src/blend.rs@@ -455,17 +455,31 @@ fn radius_step(radius: f64) -> f64 {/// The largest radius below `radius` (to three significant digits) at which the fillet of/// these edges works, with its result; `Ok(None)` when none does. Each candidate is a real fillet/// of the edges, so the radius returned is one that was built; the search runs up to 16 of-/// them, so it is for an explicit request, not every refusal. Only a refusal as too large+/// them (a refusal of a fillet feature's exact fit runs it to name the largest that fits, and+/// so does `fit: reduce`). Only a refusal as too large/// ([`KernelError::TooLarge`]) narrows the search: any other failure of a candidate is the/// search's error, since a smaller radius would not be the largest that fits.pub fn fillet_max(body: &Body, edges: &[Vec3], radius: f64) -> Result<Option<(f64, Body)>> {let _span = solidcraft_profile::span("kernel", "fillet_max");- if !(radius.is_finite() && radius > 1e-6) {+ largest_that_fits(radius, |r| fillet(body, edges, r))+}++/// [`fillet_max`] for an equal-distance chamfer of these edges: the largest distance below+/// `distance` (to three significant digits) at which it works, with its result.+pub fn chamfer_max(body: &Body, edges: &[Vec3], distance: f64) -> Result<Option<(f64, Body)>> {+ let _span = solidcraft_profile::span("kernel", "chamfer_max");+ largest_that_fits(distance, |d| chamfer(body, edges, d))+}++/// The largest size n·q below `size` (q: three significant digits of it) at which `blend` works,+/// by bisection over at most 16 blends; only [`KernelError::TooLarge`] narrows the search.+fn largest_that_fits(size: f64, blend: impl Fn(f64) -> Result<Body>) -> Result<Option<(f64, Body)>> {+ if !(size.is_finite() && size > 1e-6) {return Ok(None);}- let q = radius_step(radius);- // Radii n·q for n in [0, hi): hi is too large (it is the request, or above it), lo works.- let mut hi = (radius / q).ceil() as u64;+ let q = radius_step(size);+ // Sizes n·q for n in [0, hi): hi is too large (it is the request, or above it), lo works.+ let mut hi = (size / q).ceil() as u64;let mut lo = 0u64;let mut best: Option<Body> = None;// log2(10⁴) steps reach the step size; the cap keeps a slow body from stalling.@@ -474,7 +488,7 @@ pub fn fillet_max(body: &Body, edges: &[Vec3], radius: f64) -> Result<Option<(f6break;}let mid = lo + (hi - lo) / 2;- match fillet(body, edges, mid as f64 * q) {+ match blend(mid as f64 * q) {Ok(b) => {lo = mid;best = Some(b);diff --git a/crates/kernel/src/blend_corner.rs b/crates/kernel/src/blend_corner.rsindex c99932a867..6adf0666e7 100644--- a/crates/kernel/src/blend_corner.rs+++ b/crates/kernel/src/blend_corner.rs@@ -282,7 +282,7 @@ mod tests {}#[test]- fn sloped_rim_fillets_cannot_extend_outside_the_material() {+ fn sloped_rim_fillets_stay_inside_the_material() {use solidcraft_geom::{Loop2, Plane, Vec2};for margin in [0.5, 1.0] {let rectangle = |x0, y0, x1, y1| Loop2::polygon(&[Vec2::new(x0, y0), Vec2::new(x1, y0), Vec2::new(x1, y1), Vec2::new(x0, y1)]);@@ -294,9 +294,21 @@ mod tests {.unwrap();let basin = crate::boolean(&slab, &pocket, crate::BoolOp::Cut).unwrap().unwrap();let picks = [Vec3::new(50.0, margin, 30.0), Vec3::new(80.0, 27.0, 30.0), Vec3::new(50.0, 50.0, 30.0), Vec3::new(20.0, 27.0, 30.0)];+ // R4 runs over the thin rim's top past the slab's front edge (a cliff): it is built+ // as if the top went on and cut from the slab (the blend-overflow decision,+ // 237f0ae74), so nothing of it lies outside the slab.for count in [1, 2, 4] {- assert!(fillet(&basin, &picks[..count], 4.0).is_err());- assert!(fillet(&basin, &picks[..count], margin * 0.5).is_ok());+ for r in [4.0, margin * 0.5] {+ let result = fillet(&basin, &picks[..count], r).unwrap_or_else(|e| panic!("{margin}, {count}, {r}: {e}"));+ assert!(result.validity().is_empty(), "{margin}, {count}, {r}: {:?}", result.validity());+ assert!(vol(&result) < vol(&basin));+ for p in vertices(&result) {+ assert!(+ p.x >= 0.0 && p.x <= 100.0 && p.y >= 0.0 && p.y <= 60.0 && p.z >= 0.0 && p.z <= 30.0 + 1e-8,+ "{margin}, {count}, {r}: {p:?}"+ );+ }+ }}}}@@ -343,7 +355,7 @@ mod tests {}#[test]- fn equal_slope_rim_loops_cannot_escape_the_face() {+ fn equal_slope_rim_loops_stay_inside_the_material() {use solidcraft_geom::{Loop2, Plane, Vec2};let rectangle = |x0, y0, x1, y1| Loop2::polygon(&[Vec2::new(x0, y0), Vec2::new(x1, y0), Vec2::new(x1, y1), Vec2::new(x0, y1)]);let slab = box_solid(Vec3::ZERO, Vec3::new(100.0, 60.0, 30.0)).unwrap();@@ -352,9 +364,16 @@ mod tests {.unwrap();let basin = crate::boolean(&slab, &pocket, crate::BoolOp::Cut).unwrap().unwrap();let picks = [Vec3::new(50.0, 1.0, 30.0), Vec3::new(80.0, 27.0, 30.0), Vec3::new(50.0, 50.0, 30.0), Vec3::new(20.0, 27.0, 30.0)];- assert!(crate::chamfer(&basin, &picks, 2.0).is_err());- assert!(fillet(&basin, &picks, 4.0).is_err());- assert!(crate::chamfer(&basin, &picks, 0.5).is_ok());- assert!(fillet(&basin, &picks, 0.5).is_ok());+ // Past the 1 mm rim the blends run over the slab's front edge (a cliff) and are cut from+ // the slab (the blend-overflow decision, 237f0ae74): nothing escapes it.+ for (round, size) in [(false, 2.0), (true, 4.0), (false, 0.5), (true, 0.5)] {+ let result = if round { fillet(&basin, &picks, size) } else { crate::chamfer(&basin, &picks, size) };+ let result = result.unwrap_or_else(|e| panic!("round={round}, {size}: {e}"));+ assert!(result.validity().is_empty(), "round={round}, {size}: {:?}", result.validity());+ assert!(vol(&result) < vol(&basin));+ for p in vertices(&result) {+ assert!(p.x >= 0.0 && p.x <= 100.0 && p.y >= 0.0 && p.y <= 60.0 && p.z >= 0.0 && p.z <= 30.0 + 1e-8, "round={round}, {size}: {p:?}");+ }+ }}}diff --git a/crates/kernel/src/blend_wrong_way_tests.rs b/crates/kernel/src/blend_wrong_way_tests.rsindex 9d927c16c2..6b80bf0f92 100644--- a/crates/kernel/src/blend_wrong_way_tests.rs+++ b/crates/kernel/src/blend_wrong_way_tests.rs@@ -27,13 +27,14 @@ fn block_with_ball_cut() -> Body {/// The ball's rim on the back face dips to 0.04 mm above the bottom: a 0.5 mm chamfer of it/// would run off the back face, and what was built grew the part (by 0.65 mm³, more with other-/// edge orders). On a convex edge a chamfer takes material away, so it is refused.+/// edge orders). On a convex edge a chamfer takes material away, so it is refused, as too large+/// (SMLib's NO_ROOM).#[test]fn a_chamfer_that_would_grow_the_part_on_a_convex_edge_is_refused() {let body = block_with_ball_cut();let rim = Vec3::new(3.1526309873924174, 22.5, 0.04277569594852188);let e = chamfer(&body, &[rim], 0.5).expect_err("refused");- assert!(matches!(e, KernelError::TooLarge(_)) && e.to_string().contains("convex"), "{e}");+ assert!(matches!(e, KernelError::TooLarge(_)), "{e}");}/// Curved convex edges that a chamfer does take material from still build: a hole's rim in adiff --git a/crates/kernel/src/issue_1080_tests.rs b/crates/kernel/src/issue_1080_tests.rsindex 09e8c3497f..aee6e90a59 100644--- a/crates/kernel/src/issue_1080_tests.rs+++ b/crates/kernel/src/issue_1080_tests.rs@@ -1,5 +1,9 @@-//! #1080: fillets and chamfers that would run past the faces beside their edge (into a pocket,-//! a hole, another blend) are refused with the largest size that fits, not built through it.+//! #1080: fillets and chamfers that would run past the faces beside their edge. A convex blend+//! running over a face's far edge into a pocket or a hole (a cliff) is built as if its faces went+//! on and what it removes is cut from the body, so it never bridges the opening (the owner's+//! blend-overflow decision, 237f0ae74); blends that would cross each other are refused as too+//! large, and the largest size that fits is found by searching ([`crate::fillet_max`],+//! [`crate::chamfer_max`]).use solidcraft_geom::Vec3;@@ -22,33 +26,53 @@ fn too_large(r: crate::Result<Body>) -> String {match r {Err(KernelError::TooLarge(m)) => m,Err(e) => panic!("refused, but not as too large: {e}"),- Ok(_) => panic!("a blend through the pocket was accepted"),+ Ok(_) => panic!("a blend that runs into another was accepted"),}}+/// The pocketed block's volume: 16000 less the 1000 mm³ pocket.+const POCKETED: f64 = 15000.0;++/// The 6 mm chamfer runs 2 mm past the pocket's rim at x = 36: its triangle+/// (40 − x) + (20 − z) <= 6, area 18 along the 20 mm edge, less its part over the pocket+/// (x in [34, 36], z >= 54 − x: area 2, along the pocket's 10 mm), is cut away: 360 − 20.#[test]-fn chamfer_into_a_pocket_is_refused_with_the_size_that_fits() {+fn chamfer_into_a_pocket_is_cut_by_it() {let p = pocketed();- let m = too_large(crate::chamfer(&p, &[EDGE], 6.0));- assert!(m.contains("runs past the faces beside the edge") && m.contains("the largest size that fits is 4 mm"), "{m}");+ let b = crate::chamfer(&p, &[EDGE], 6.0).unwrap();+ assert!(b.validity().is_empty(), "{:?}", b.validity());+ let v = crate::measure(&b).unwrap().volume;+ assert!((v - (POCKETED - 340.0)).abs() < 1e-6, "{v}");// Up to the pocket's rim it builds: the triangle along the 20 mm edge.for s in [2.0, 4.0] {let b = crate::chamfer(&p, &[EDGE], s).unwrap();let v = b.volume_at(0.01).unwrap();assert!((p.volume_at(0.01).unwrap() - v - 0.5 * s * s * 20.0).abs() < 1e-6, "{s}: {v}");}- // Unequal sides: along the top 6 is past the pocket, along the side it is not.- let m = too_large(crate::chamfer_sides(&p, &[EDGE], 6.0, ChamferSide::Distance(2.0), false));- assert!(m.contains("runs past"), "{m}");- assert!(crate::chamfer_sides(&p, &[EDGE], 2.0, ChamferSide::Distance(6.0), false).is_ok());+ // Unequal sides, 6 along the top and 2 down the side: the triangle+ // (40 − x) / 6 + (20 − z) / 2 <= 1, area 6 along 20, less its part over the pocket+ // (x in [34, 36], a triangle 2 by 2/3), along 10: 120 − 20/3. The other way round it stays+ // clear of the pocket: 120.+ let b = crate::chamfer_sides(&p, &[EDGE], 6.0, ChamferSide::Distance(2.0), false).unwrap();+ let v = crate::measure(&b).unwrap().volume;+ assert!((v - (POCKETED - (120.0 - 20.0 / 3.0))).abs() < 1e-6, "{v}");+ let b = crate::chamfer_sides(&p, &[EDGE], 2.0, ChamferSide::Distance(6.0), false).unwrap();+ let v = crate::measure(&b).unwrap().volume;+ assert!((v - (POCKETED - 120.0)).abs() < 1e-6, "{v}");}+/// R5 runs 1 mm past the pocket's rim: the round's section (1 − π/4)·25 along 20, less its part+/// over the pocket, the square [35, 36] × [15, 20] outside the circle about (35, 15) of radius 5,+/// ∫₀¹ (5 − √(25 − t²)) dt = 5 − (√24 / 2 + (25/2)·asin(1/5)), along 10.#[test]-fn fillet_into_a_pocket_is_refused_and_one_that_fits_builds() {+fn fillet_into_a_pocket_is_cut_by_it_and_one_that_fits_builds() {let p = pocketed();- // The round build refuses it itself; the largest radius that fits is added.- let m = crate::fillet(&p, &[EDGE], 5.0).unwrap_err().to_string();- assert!(m.contains("the largest radius that fits is 4 mm"), "{m}");+ let over = 5.0 - (24f64.sqrt() / 2.0 + 12.5 * (0.2f64).asin());+ let want = POCKETED - ((1.0 - std::f64::consts::FRAC_PI_4) * 25.0 * 20.0 - over * 10.0);+ let b = crate::fillet(&p, &[EDGE], 5.0).unwrap();+ assert!(b.validity().is_empty(), "{:?}", b.validity());+ let v = crate::measure(&b).unwrap().volume;+ assert!((v - want).abs() < 1e-6 * want, "{v} vs {want}");let b = crate::fillet(&p, &[EDGE], 3.0).unwrap();assert!(b.validity().is_empty(), "{:?}", b.validity());assert_eq!(b.face_count(), p.face_count() + 1);@@ -56,15 +80,15 @@ fn fillet_into_a_pocket_is_refused_and_one_that_fits_builds() {/// A rib 4 mm wide: chamfers of its two top edges meet in the middle of its top face at 2 mm;/// past that they would cross each other. Neither reaches the far side's face below 4 mm,-/// so only the two blends clash.+/// so only the two blends clash: refused as too large, and the largest that fits is 2 mm.#[test]fn chamfers_crossing_each_other_are_refused() {let rib = box_solid(Vec3::new(0.0, 0.0, 0.0), Vec3::new(40.0, 4.0, 20.0)).unwrap();let edges = [Vec3::new(20.0, 0.0, 20.0), Vec3::new(20.0, 4.0, 20.0)];- let m = too_large(crate::chamfer(&rib, &edges, 3.0));- assert!(m.contains("would cross each other") && m.contains("the largest size that fits is 2 mm"), "{m}");- let m = crate::fillet(&rib, &edges, 3.0).unwrap_err().to_string();- assert!(m.contains("the largest radius that fits is 2 mm"), "{m}");+ too_large(crate::chamfer(&rib, &edges, 3.0));+ too_large(crate::fillet(&rib, &edges, 3.0));+ assert_eq!(crate::chamfer_max(&rib, &edges, 3.0).unwrap().map(|x| x.0), Some(2.0));+ assert_eq!(crate::fillet_max(&rib, &edges, 3.0).unwrap().map(|x| x.0), Some(2.0));// Below half the width both build.let b = crate::chamfer(&rib, &edges, 1.5).unwrap();assert!((b.volume_at(0.01).unwrap() - (3200.0 - 2.0 * 0.5 * 1.5 * 1.5 * 40.0)).abs() < 1e-6);@@ -89,16 +113,25 @@ fn chamfers_meeting_at_a_corner_still_build() {fn rounds_on_both_sides_of_a_wall_build_as_one_fillet() {let outer = box_solid(Vec3::new(-52.0, -32.0, 0.0), Vec3::new(52.0, 32.0, 42.0)).unwrap();let shelled = cut(&outer, [-50.0, -30.0, -1.0], [50.0, 30.0, 40.0]);+ let v0 = 104.0 * 64.0 * 42.0 - 100.0 * 60.0 * 40.0;let (out_edge, in_edge) = (Vec3::new(0.0, 32.0, 42.0), Vec3::new(0.0, 30.0, 40.0));let section = (1.0 - std::f64::consts::FRAC_PI_4) * 25.0;let alone = crate::fillet(&shelled, &[out_edge], 5.0).unwrap();assert!(alone.validity().is_empty(), "{:?}", alone.validity());let want = shelled.volume_at(0.01).unwrap() - section * 104.0;assert!((crate::measure(&alone).unwrap().volume - want).abs() < 1e-4 * want);- let m = too_large(crate::fillet(&shelled, &[out_edge], 7.0));- let largest: f64 = m.rsplit("that fits is ").next().and_then(|t| t.trim_end_matches(" mm").parse().ok()).unwrap_or(0.0);- let limit = 2.0 * 2f64.sqrt() / (2f64.sqrt() - 1.0);- assert!(largest <= limit && largest > limit - 0.5, "{m}");+ // R7 alone passes the inside corner: the round is cut from the wall as if the hollow were+ // not there, which opens a slit along the hollow's 100 mm. Its section (1 - π/4)·49 along+ // 104, less its part over the hollow, the square [25, 30] × [35, 40] outside the circle about+ // (25, 35) of radius 7: 5 (5 - √24) - (F(5) - F(√24)), F(t) = (t √(49 - t²) + 49 asin(t/7)) / 2.+ let f = |t: f64| 0.5 * (t * (49.0 - t * t).sqrt() + 49.0 * (t / 7.0).asin());+ let over = 5.0 * (5.0 - 24f64.sqrt()) - (f(5.0) - f(24f64.sqrt()));+ let section7 = (1.0 - std::f64::consts::FRAC_PI_4) * 49.0;+ let wide = crate::fillet(&shelled, &[out_edge], 7.0).unwrap();+ assert!(wide.validity().is_empty(), "{:?}", wide.validity());+ let want = v0 - (section7 * 104.0 - over * 100.0);+ let v = crate::measure(&wide).unwrap().volume;+ assert!((v - want).abs() < 1e-7 * want, "{v} vs {want}");let both = crate::fillet(&shelled, &[out_edge, in_edge], 5.0).unwrap();assert!(both.validity().is_empty(), "{:?}", both.validity());let want = shelled.volume_at(0.01).unwrap() - section * 104.0 + section * 100.0;@@ -106,9 +139,15 @@ fn rounds_on_both_sides_of_a_wall_build_as_one_fillet() {assert!((v - want).abs() < 1e-4 * want, "{v} vs {want}");let stepped = crate::fillet(&crate::fillet(&shelled, &[in_edge], 5.0).unwrap(), &[out_edge], 5.0).unwrap();assert!((crate::measure(&stepped).unwrap().volume - v).abs() < 1e-4 * want);- // Past the wall's own room they still cross: R7's outer round reaches the inner one's arc.- let m = too_large(crate::fillet(&shelled, &[out_edge, in_edge], 7.0));- assert!(m.contains("the largest radius that fits"), "{m}");+ // Both at R7: the arcs, about (25, 35) and (23, 33), cross only outside both quarter arcs,+ // and the inner round's material holds the part of the outer round over the hollow (at least+ // 9.7 mm from (23, 33)), so the wall stays closed: the outer round takes its whole section+ // along 104 and the inner one adds it along 100.+ let both = crate::fillet(&shelled, &[out_edge, in_edge], 7.0).unwrap();+ assert!(both.validity().is_empty(), "{:?}", both.validity());+ let want = v0 - section7 * 4.0;+ let v = crate::measure(&both).unwrap().volume;+ assert!((v - want).abs() < 1e-7 * want, "{v} vs {want}");}/// A shell 3 mm thick bent over like an upside-down U: 60 wide, 20 long, 50 high, its topdiff --git a/crates/kernel/src/issue_324_tests.rs b/crates/kernel/src/issue_324_tests.rsindex 57cb86a528..b05f442644 100644--- a/crates/kernel/src/issue_324_tests.rs+++ b/crates/kernel/src/issue_324_tests.rs@@ -1,5 +1,5 @@-//! #324: a round on a block's top edge that would overlap a through hole is refused, and the-//! largest radius the refusal offers fits.+//! #324: a round on a block's top edge that runs over a through hole: built as if the top went+//! on, and cut by the hole.use solidcraft_geom::Vec3;@@ -13,25 +13,34 @@ fn block_with_hole(y: f64) -> Body {}/// The round on the top edge at y = 20 covers the top face from y = 20 - r, and the hole's-/// wall reaches y = 17.5: a radius over 2.5 runs into the hole. The refusal of 4 mm offered-/// 2.721 mm, which was refused the same way: the curved wall's mesh, with its tolerance, was-/// first seen inside the round's region 0.22 mm past where the wall really enters it.+/// wall reaches y = 17.5: a radius over 2.5 runs into the hole. R4 is built as if the top went+/// on over the hole and cut from the block (the blend-overflow decision, 237f0ae74): the round+/// takes 16 (1 - π/4) of the section along 40, less its part over the hole, where the round's+/// height above its arc, 4 - √(16 - (y - 16)²), stands over the hole's width+/// 2 √(9 - (y - 14.5)²) for y in [16, 17.5] (integrated with y = 17.5 - s², smooth in s).#[test]-fn the_radius_offered_beside_a_hole_fits() {+fn a_round_into_a_hole_is_cut_by_it() {+ use std::f64::consts::{FRAC_PI_4, PI};let b = block_with_hole(14.5);let edge = Vec3::new(10.0, 20.0, 10.0);- let m = crate::fillet(&b, &[edge], 4.0).unwrap_err().to_string();- let offered: f64 = m- .split("the largest radius that fits is ")- .nth(1)- .and_then(|s| s.split(' ').next())- .and_then(|s| s.parse().ok())- .unwrap_or_else(|| panic!("no radius offered: {m}"));- assert!(offered > 2.0 && offered <= 2.5, "{m}");- let r = crate::fillet(&b, &[edge], offered).unwrap();+ let r = crate::fillet(&b, &[edge], 4.0).unwrap();assert!(r.validity().is_empty(), "{:?}", r.validity());- // The block, the hole and the round's corner: the round stays clear of the hole.- let want = 8000.0 - std::f64::consts::PI * 9.0 * 10.0 - 40.0 * offered * offered * (1.0 - std::f64::consts::FRAC_PI_4);+ let (n, top) = (20000, 1.5f64.sqrt());+ let over: f64 = (0..n)+ .map(|i| {+ let s = (i as f64 + 0.5) * top / n as f64;+ let y = 17.5 - s * s;+ 2.0 * (9.0 - (y - 14.5).powi(2)).sqrt() * (4.0 - (16.0 - (y - 16.0).powi(2)).sqrt()) * 2.0 * s+ })+ .sum::<f64>()+ * top+ / n as f64;+ let want = 8000.0 - PI * 9.0 * 10.0 - (40.0 * 16.0 * (1.0 - FRAC_PI_4) - over);+ let v = crate::measure(&r).unwrap().volume;+ assert!((v - want).abs() < 1e-7 * want, "{v} against {want}");+ // Clear of the hole (up to 2.5) the round keeps its whole section.+ let r = crate::fillet(&b, &[edge], 2.5).unwrap();+ let want = 8000.0 - PI * 9.0 * 10.0 - 40.0 * 2.5 * 2.5 * (1.0 - FRAC_PI_4);let v = r.volume_at(0.005).unwrap();assert!((v - want).abs() < 0.05, "{v} against {want}");}diff --git a/crates/kernel/src/issue_851_tests.rs b/crates/kernel/src/issue_851_tests.rsindex de12d5c7ad..d3f491d3d8 100644--- a/crates/kernel/src/issue_851_tests.rs+++ b/crates/kernel/src/issue_851_tests.rs@@ -231,25 +231,36 @@ fn arc_top_edge_sizes_never_panic() {}}-/// At the full wall height the fitted contact coincides with the bottom arc: retaining that-/// wall produces a zero-area face, not a successful blend (#1113). Just below the limit the-/// wall still has area and must remain supported. Face order and mirrored edge directions-/// do not change either outcome.+/// At the full wall height the fitted contact coincides with the bottom arc. A round there uses+/// the wall up (the blend-overflow decision, 237f0ae74: a round may use up a face), taking the+/// whole corner between the wall and the top; a chamfer of the wall's full height is refused as+/// too large (it would leave the wall a zero-area face, #1113). Just below the limit the wall+/// still has area and both build. Face order and mirrored edge directions do not change either+/// outcome.#[test]-fn arc_top_blend_refuses_a_collapsed_wall() {+fn arc_top_blend_uses_up_the_wall_and_refuses_a_collapsed_one() {for body in [part(), part_other_order(), part_cut_from_a_box()] {for z in [1.0, -1.0] {let matrix = [[1.0, 0.0, 0.0, 0.0], [0.0, 1.0, 0.0, 0.0], [0.0, 0.0, z, 0.0], [0.0, 0.0, 0.0, 1.0]];let body = transform_matrix(&body, matrix).unwrap();let at = arc_top();let pick = [Vec3::new(at.x, at.y, at.z * z)];+ let before = planned_volume(&body);for round in [true, false] {let blend = |r| if round { fillet(&body, &pick, r) } else { chamfer(&body, &pick, r) };- let error = blend(HEIGHT).unwrap_err();- assert!(matches!(error, KernelError::TooLarge(_)), "round={round}, mirror={z}: {error}");+ if round {+ let made = blend(HEIGHT).unwrap();+ assert!(made.validity().is_empty(), "mirror={z}: {:?}", made.validity());+ assert_eq!(made.face_count(), body.face_count(), "mirror={z}: the round takes the wall's place");+ let removed = before - planned_volume(&made);+ let expected = arc_top_removed(HEIGHT, true);+ assert!((removed - expected).abs() < 0.01 * expected + 0.01, "mirror={z}: removed {removed}, expected {expected}");+ } else {+ let error = blend(HEIGHT).unwrap_err();+ assert!(matches!(error, KernelError::TooLarge(_)), "mirror={z}: {error}");+ }let made = blend(HEIGHT - 0.5).unwrap();assert!(made.validity().is_empty(), "round={round}, mirror={z}: {:?}", made.validity());- let before = planned_volume(&body);let removed = before - planned_volume(&made);let expected = arc_top_removed(HEIGHT - 0.5, round);assert!((removed - expected).abs() < 0.01 * expected + 0.01, "round={round}, mirror={z}: removed {removed}, expected {expected}");diff --git a/crates/kernel/src/lib.rs b/crates/kernel/src/lib.rsindex a0cce026bb..6f394c29ed 100644--- a/crates/kernel/src/lib.rs+++ b/crates/kernel/src/lib.rs@@ -155,8 +155,8 @@ mod validity;pub mod watch;pub use blend::{- ChamferSide, blend_edges, chamfer, chamfer_sides, fillet, fillet_each, fillet_g2, fillet_g2_corners, fillet_least_setback, fillet_max,- fillet_max_each, fillet_setback, tangent_chain,+ ChamferSide, blend_edges, chamfer, chamfer_max, chamfer_sides, fillet, fillet_each, fillet_g2, fillet_g2_corners, fillet_least_setback,+ fillet_max, fillet_max_each, fillet_setback, tangent_chain,};pub use blend_corner::fillet_radii;pub use blend_variable::{RadiusSpline, Taper, fillet_chord, fillet_tapered, fillet_variable, fillet_variable_points, fillet_variable_spline, taper};diff --git a/crates/kernel/src/record_tests.rs b/crates/kernel/src/record_tests.rsindex 0c0e20653c..9eb843938d 100644--- a/crates/kernel/src/record_tests.rs+++ b/crates/kernel/src/record_tests.rs@@ -393,9 +393,10 @@ fn loft_sections() {assert_eq!(origins(&b), want);}-/// Faces of a sweep: the start cap in the profile's plane; each segment's faces run the whole-/// path, the first one standing on that segment.-fn check_sweep(b: &Body, plane: &Plane, r: &Region2, faces_per_segment: Option<usize>) {+/// Faces of a sweep: the start cap in the profile's plane; each segment's faces run along the+/// path, the first one standing on that segment; `faces_per_segment`, if given, the number of+/// faces each segment sweeps, in segment order.+fn check_sweep(b: &Body, plane: &Plane, r: &Region2, faces_per_segment: Option<&[usize]>) {let loops: Vec<&Loop2> = std::iter::once(&r.outer).chain(&r.holes).collect();let n: usize = loops.iter().map(|l| l.segs.len()).sum();let got = origins(b);@@ -420,7 +421,7 @@ fn check_sweep(b: &Body, plane: &Plane, r: &Region2, faces_per_segment: Option<u}let counts: Vec<usize> = (0..n).map(|k| got.iter().filter(|o| **o == [P(k)]).count()).collect();match faces_per_segment {- Some(c) => assert!(counts.iter().all(|x| *x == c), "{counts:?}"),+ Some(c) => assert_eq!(counts, c),None => assert!(counts.windows(2).all(|w| w[0] == w[1] && w[0] > 0), "{counts:?}"),}}@@ -434,8 +435,10 @@ fn sweeps_along_paths() {PathSeg::Arc { a: Vec3::new(0.0, 0.0, 10.0), center: Vec3::new(20.0, 0.0, 10.0), axis: Vec3::Y, angle: FRAC_PI_2 },];let b = crate::sweep(&Plane::XY, &r, &path).unwrap();- check_sweep(&b, &Plane::XY, &r, Some(2));- // Along a smooth 3D path: one wall per segment.+ check_sweep(&b, &Plane::XY, &r, Some(&[2; 4]));+ // Along 41 points of a smooth 3D curve: a point path is the polyline its points make, swept+ // line by line and mitred at each point (43e8b0349), so the circle (one segment, one closed+ // arc in SMLib) has a wall along each of the 40 lines.let curve: Vec<Vec3> = (0..=40).map(|i| {let t = i as f64 / 40.0 * FRAC_PI_2;@@ -445,16 +448,19 @@ fn sweeps_along_paths() {let plane = Plane::from_normal(curve[0], (curve[1] - curve[0]).normalized().unwrap()).unwrap();let circle = Region2 { outer: Loop2::circle(Vec2::ZERO, 2.0), holes: vec![] };let b = crate::sweep_path(&plane, &circle, &curve).unwrap();- check_sweep(&b, &plane, &circle, Some(1));- // A path with a corner, a holed profile: ruled walls station to station.+ check_sweep(&b, &plane, &circle, Some(&[40]));+ // A path with a corner, a holed profile: a wall along each leg, mitred at the corner. The+ // corner turns the profile about Y, so each line at a constant y (segments 0 and 2 of the+ // outer loop, 1 and 3 of the hole, drawn the other way round) sweeps the plane it lies in+ // along both legs: one L-shaped planar face. The lines at a constant x make two each.let holed = Region2 { outer: rect(-3.0, -3.0, 3.0, 3.0), holes: vec![rect(-1.0, -1.0, 1.0, 1.0).reversed()] };let b = crate::sweep_path(&Plane::XY, &holed, &[Vec3::ZERO, Vec3::new(0.0, 0.0, 20.0), Vec3::new(20.0, 0.0, 20.0)]).unwrap();- check_sweep(&b, &Plane::XY, &holed, Some(2));+ check_sweep(&b, &Plane::XY, &holed, Some(&[1, 2, 1, 2, 2, 1, 2, 1]));// A coil: a smooth wall per segment.let side = Plane { origin: Vec3::ZERO, x: Vec3::X, y: Vec3::Z };let ring = Region2 { outer: Loop2::circle(Vec2::new(20.0, 0.0), 2.0), holes: vec![] };let b = crate::sweep_helix(&side, &ring, Vec3::ZERO, Vec3::Z, 8.0, 3.0).unwrap();- check_sweep(&b, &side, &ring, Some(1));+ check_sweep(&b, &side, &ring, Some(&[1]));}/// Kept faces are their origins, unchanged; each edge an operand still owns is that edge (a newdiff --git a/crates/kernel/src/tests.rs b/crates/kernel/src/tests.rsindex cf1718e34f..d3387b1b39 100644--- a/crates/kernel/src/tests.rs+++ b/crates/kernel/src/tests.rs@@ -322,6 +322,7 @@ fn loop_fillet_as_tall_as_its_wall_consumes_it() {fn fillet_consuming_a_side_face_makes_a_full_round() {// 14 x 6 x 10: r = 3 on the four vertical edges uses up both 6 mm end faces (#199).let b = box_solid(Vec3::new(14.0, 0.0, 0.0), Vec3::new(28.0, 6.0, 10.0)).unwrap();+ let before = measure(&b).unwrap().volume;let mids = [Vec3::new(14.0, 0.0, 5.0), Vec3::new(28.0, 0.0, 5.0), Vec3::new(14.0, 6.0, 5.0), Vec3::new(28.0, 6.0, 5.0)];let full = 840.0 - (4.0 - PI) * 9.0 * 10.0;for order in [mids.to_vec(), mids.iter().rev().copied().collect()] {@@ -343,12 +344,13 @@ fn fillet_consuming_a_side_face_makes_a_full_round() {let c = fillet(&post, &corners, 3.0).unwrap();assert!(rel(measure(&c).unwrap().volume, PI * 9.0 * 10.0) < 2e-4, "{}", measure(&c).unwrap().volume);assert!(c.validity().is_empty());- // Past the limit there is no face left to consume: still refused, the body unchanged.+ // Past the limit the two rounds on each 6 mm end would cross: still refused as too large+ // (SMLib's NO_ROOM), the body unchanged.for r in [3.0 + 1e-3, 3.5] {let e = fillet(&b, &mids, r).unwrap_err();- assert!(e.to_string().contains("larger than the neighbouring faces"), "{r}: {e}");+ assert!(matches!(e, KernelError::TooLarge(_)), "{r}: {e}");}- assert_eq!(measure(&b).unwrap().volume, 840.0);+ assert_eq!(measure(&b).unwrap().volume, before);}#[test]@@ -362,13 +364,46 @@ fn fillet_max_finds_the_largest_radius_that_works() {let (r, body) = fillet_max(&b, &mids, 3.5).unwrap().unwrap();assert_eq!(r, 3.0);assert!(rel(measure(&body).unwrap().volume, 840.0 - (4.0 - PI) * 90.0) < 2e-4);- // A 2 mm disc's top edge: up to 2 (the wall used up).+ // No edge there: the fillet's own error, not a smaller radius (only a refusal as too large+ // narrows the search).+ let e = fillet(&b, &[Vec3::new(500.0, 0.0, 5.0)], 1.0).unwrap_err();+ assert!(!matches!(e, KernelError::TooLarge(_)), "{e}");+ assert_eq!(fillet_max(&b, &[Vec3::new(500.0, 0.0, 5.0)], 1.0).unwrap_err().to_string(), e.to_string());+}++/// Rounds past the bottom of a wall (a cliff) are built as if the wall went on and cut from the+/// part (the blend-overflow decision, 237f0ae74), never refused as too large: a disc's top edge+/// past its 2 mm wall, and a block's top outline past the 7 mm wall over a notch.+#[test]+fn rounds_past_the_bottom_of_a_wall_are_cut_from_the_part() {+ // A 2 mm disc's top edge at 2.5 runs past the wall's bottom edge (a cliff): the round is+ // built as if the wall went on down and cut from the disc (the blend-overflow decision,+ // 237f0ae74), not refused. Its section in (ρ, z), the 2.5 square at the edge outside the+ // circle about (10.5, -0.5) above z = 0, turned about the axis: with t = z + 0.5 =+ // 2.5 sin θ, the round's inner radius ρ(θ) = 10.5 + 2.5 cos θ, the disc keeps+ // π (169·2 − ∫ (169 − ρ²) dz) (2 mm: Pappus, as `loop_fillet_as_tall_as_its_wall_consumes_it`).+ use std::f64::consts::FRAC_PI_2;let disc = cylinder(Vec3::ZERO, Vec3::Z, 13.0, 2.0).unwrap();let top = [Vec3::new(0.0, 13.0, 2.0), Vec3::new(0.0, -13.0, 2.0)];- assert!(too_large(&disc, &top, 2.5));- assert_eq!(fillet_max(&disc, &top, 2.5).unwrap().map(|x| x.0), Some(2.0));- // Walls of different heights: at the shortest one's height only that wall would be used up,- // which is refused, so the largest radius is just below it (to the search's 3 digits).+ let past = fillet(&disc, &top, 2.5).unwrap();+ let (n, lo) = (20000, (0.5f64 / 2.5).asin());+ let taken: f64 = (0..n)+ .map(|i| {+ let th = lo + (i as f64 + 0.5) * (FRAC_PI_2 - lo) / n as f64;+ let rho = 10.5 + 2.5 * th.cos();+ (169.0 - rho * rho) * 2.5 * th.cos()+ })+ .sum::<f64>()+ * (FRAC_PI_2 - lo)+ / n as f64;+ let want = PI * (169.0 * 2.0 - taken);+ assert!(rel(measure(&past).unwrap().volume, want) < 1e-6, "{} vs {want}", measure(&past).unwrap().volume);+ // Walls of different heights, a 7 mm one over a notch: R7 uses that wall up (a round may),+ // and R8 runs past its bottom edge into the notch (a cliff) and is cut by it. The outline's+ // mitred round takes (1 − π/4) r² along the outline less 8 times its centroid's distance+ // from the faces, r (10 − 3π) / (3 (4 − π)); at R8 less its part inside the notch+ // [35, 40] × [0, 5] × [2, 3], where each of the corner's two rounds reaches g = 8 − √(64 − t²)+ // in from its face at t = z − 2 on its side of the mitre: ∫₀¹ 2 (5g − g²/2) dt.let notched = boolean(&box_solid(Vec3::ZERO, Vec3::new(40.0, 30.0, 10.0)).unwrap(),&box_solid(Vec3::new(35.0, -1.0, -1.0), Vec3::new(41.0, 5.0, 3.0)).unwrap(),@@ -377,14 +412,20 @@ fn fillet_max_finds_the_largest_radius_that_works() {.unwrap().unwrap();let outline = [Vec3::new(20.0, 0.0, 10.0), Vec3::new(40.0, 15.0, 10.0), Vec3::new(20.0, 30.0, 10.0), Vec3::new(0.0, 15.0, 10.0)];- assert!(too_large(¬ched, &outline, 8.0));- let (r, _) = fillet_max(¬ched, &outline, 8.0).unwrap().unwrap();- assert!((r - 6.999).abs() < 1e-9, "{r}");- // No edge there: the fillet's own error, not a smaller radius (only a refusal as too large- // narrows the search).- let e = fillet(&b, &[Vec3::new(500.0, 0.0, 5.0)], 1.0).unwrap_err();- assert!(!matches!(e, KernelError::TooLarge(_)), "{e}");- assert_eq!(fillet_max(&b, &[Vec3::new(500.0, 0.0, 5.0)], 1.0).unwrap_err().to_string(), e.to_string());+ let mitred = |r: f64| (1.0 - PI / 4.0) * r * r * (140.0 - 8.0 * r * (10.0 - 3.0 * PI) / (3.0 * (4.0 - PI)));+ let in_notch: f64 = (0..n)+ .map(|i| {+ let t = (i as f64 + 0.5) / n as f64;+ let g = 8.0 - (64.0 - t * t).sqrt();+ 2.0 * (5.0 * g - g * g / 2.0)+ })+ .sum::<f64>()+ / n as f64;+ for (r, want) in [(7.0, 11925.0 - mitred(7.0)), (8.0, 11925.0 - (mitred(8.0) - in_notch))] {+ let b = fillet(¬ched, &outline, r).unwrap();+ assert!(b.validity().is_empty(), "{r}: {:?}", b.validity());+ assert!(rel(measure(&b).unwrap().volume, want) < 1e-6, "{r}: {} vs {want}", measure(&b).unwrap().volume);+ }}/// Edges that share no face get their own largest radius: a 2 mm fin's top edge takes at most@@ -1132,21 +1173,63 @@ fn chamfer_sloped_basin_rim() {assert!(mesh.contains(Vec3::new(50.0, 3.5, 28.0)));}+/// The removal of an equal-distance chamfer `d` of the rim edge at y = `margin` of+/// `chamfer_sloped_basin_rim`'s basin, cut from the slab as if its top went on past y = 0 (the+/// blend-overflow decision, 237f0ae74): the triangle between the edge (margin, 30), the top's+/// contact (margin − d, 30) and the wall's contact d down the wall towards (20, 10), clipped to+/// y >= 0, times the chamfer's length at its depth h, 60 − h between the sloped end walls:+/// area · (30 + z̄) over the clipped polygon (shoelace).+fn basin_rim_chamfer_removed(margin: f64, d: f64) -> f64 {+ let len = ((20.0 - margin).powi(2) + 400.0).sqrt();+ let (e, t) = ((margin, 30.0), (margin - d, 30.0));+ let w = (margin + d * (20.0 - margin) / len, 30.0 - d * 20.0 / len);+ let poly = if t.0 >= 0.0 {+ vec![e, t, w]+ } else {+ let s = -t.0 / (w.0 - t.0);+ vec![e, (0.0, 30.0), (0.0, t.1 + s * (w.1 - t.1)), w]+ };+ let (mut area, mut moment) = (0.0, 0.0);+ for i in 0..poly.len() {+ let ((y0, z0), (y1, z1)) = (poly[i], poly[(i + 1) % poly.len()]);+ let c = y0 * z1 - y1 * z0;+ area += c / 2.0;+ moment += (z0 + z1) * c / 6.0;+ }+ area.abs() * 30.0 + moment.abs()+}+#[test]-fn chamfer_wider_than_sloped_basin_rim_is_refused() {- for (margin, distance) in [(1.0, 2.0), (1.0, 3.0), (0.5, 4.0), (1.0, 1.0)] {+fn chamfer_wider_than_sloped_basin_rim_is_cut_and_a_full_width_one_refused() {+ let rectangle = |x0, y0, x1, y1| Loop2::polygon(&[Vec2::new(x0, y0), Vec2::new(x1, y0), Vec2::new(x1, y1), Vec2::new(x0, y1)]);+ let basin = |margin: f64| {let slab = box_solid(Vec3::ZERO, Vec3::new(100.0, 60.0, 30.0)).unwrap();- let rectangle = |x0, y0, x1, y1| Loop2::polygon(&[Vec2::new(x0, y0), Vec2::new(x1, y0), Vec2::new(x1, y1), Vec2::new(x0, y1)]);let pocket =loft(&[(Plane::XY.offset(30.0), rectangle(20.0, margin, 80.0, 50.0)), (Plane::XY.offset(10.0), rectangle(30.0, 20.0, 70.0, 40.0))]).unwrap();- let basin = boolean(&slab, &pocket, BoolOp::Cut).unwrap().unwrap();- let before = measure(&basin).unwrap();- let error = chamfer(&basin, &[Vec3::new(50.0, margin, 30.0)], distance).unwrap_err();- assert!(error.to_string().contains("larger than the neighbouring faces"), "{margin}, {distance}: {error}");- assert_eq!(measure(&basin).unwrap().volume, before.volume);- // A smaller chamfer on the same thin rim is still supported.- let smaller = chamfer(&basin, &[Vec3::new(50.0, margin, 30.0)], margin * 0.5).unwrap();+ boolean(&slab, &pocket, BoolOp::Cut).unwrap().unwrap()+ };+ // The formula reads the fitting chamfer of `chamfer_sloped_basin_rim` as it does.+ let drop = 2.0 / (1.0 + 0.8f64.powi(2)).sqrt();+ assert!(rel(basin_rim_chamfer_removed(4.0, 2.0), drop * (60.0 - drop / 3.0)) < 1e-12);+ // Wider than the rim: the chamfer runs over the slab's front edge (a cliff) and is cut.+ for (margin, distance) in [(1.0, 2.0), (1.0, 3.0), (0.5, 4.0)] {+ let b = basin(margin);+ let before = measure(&b).unwrap().volume;+ let made = chamfer(&b, &[Vec3::new(50.0, margin, 30.0)], distance).unwrap_or_else(|e| panic!("{margin}, {distance}: {e}"));+ assert!(made.validity().is_empty(), "{margin}, {distance}: {:?}", made.validity());+ let want = before - basin_rim_chamfer_removed(margin, distance);+ assert!(rel(measure(&made).unwrap().volume, want) < 1e-8, "{margin}, {distance}: {} vs {want}", measure(&made).unwrap().volume);+ }+ // As wide as the rim it would use the rim's top up: a full-width chamfer is refused, the+ // body unchanged. A smaller chamfer on the same thin rim is still supported.+ for margin in [0.5, 1.0] {+ let b = basin(margin);+ let before = measure(&b).unwrap();+ let error = chamfer(&b, &[Vec3::new(50.0, margin, 30.0)], margin).unwrap_err();+ assert!(matches!(error, KernelError::TooLarge(_)), "{margin}: {error}");+ assert_eq!(measure(&b).unwrap().volume, before.volume);+ let smaller = chamfer(&b, &[Vec3::new(50.0, margin, 30.0)], margin * 0.5).unwrap();assert!(smaller.validity().is_empty());assert!(measure(&smaller).unwrap().volume < before.volume);}