Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

Regenerate generated files and fold pending files [skip ci]

github-actions[bot]762942137523
diff --git a/ATTRIBUTION.md b/ATTRIBUTION.md
index bc93f94379..968aa72573 100644
--- a/ATTRIBUTION.md
+++ b/ATTRIBUTION.md
@@ -798,6 +798,7 @@ Original SolidCraft drawings, Open for owner review; no runtime assignments.
| assets/styles/ui/themes/onyx.json | SolidCraft contributors | original Onyx stone-grey palette, option overlays and semantic icon-role mapping; existing SolidCraft artwork is unchanged | MIT OR Apache-2.0 |
| docs/book/src/media/ui-tour/window.png | SolidCraft contributors | screenshot of SolidCraft 0.29.0 itself (`solidcraft --sample`, default dark theme, software renderer, 1280x800) with original numbered callouts (digits set in DejaVu Sans Bold), captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/ui-tour/navigate.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (`--sample`, default dark theme, software renderer) orbiting, panning and zooming, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| assets/locales/pending/sketch-tool-hints.json | carlymx | Original sketch tool hints and engine error translations | MIT OR Apache-2.0 |
## Code adapted from sibling projects
diff --git a/assets/locales/ar.json b/assets/locales/ar.json
index 912ccf57ea..d2672f5f30 100644
--- a/assets/locales/ar.json
+++ b/assets/locales/ar.json
@@ -4174,6 +4174,32 @@
"sketch.dof_left": "تبقّت {count} درجات حرية",
"sketch.dof_left_one": "تبقّت {count} درجة حرية",
"sketch.draw_curves": "الرسم كـ {linetype}",
+ "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
+ "sketch.error.nothing_to_break": "nothing to break here",
+ "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
+ "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
+ "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
+ "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
+ "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
+ "sketch.hint.break": "Break: click a curve where it should split",
+ "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
+ "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
+ "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
+ "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
+ "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
+ "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
+ "sketch.hint.fallback": "Click in the sketch",
+ "sketch.hint.line": "Line: click points; right-click or Esc to finish",
+ "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
+ "sketch.hint.open_done": "Open done",
+ "sketch.hint.point3d": "3D Point: click where a 3D point goes",
+ "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
+ "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
+ "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
+ "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
+ "sketch.hint.slot": "Slot: click both ends, then the width",
+ "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
+ "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove",
"sketch.make_selection": "تحويل التحديد إلى {linetype}",
"sketch.open_ends": "مفتوحة {count}",
"sketch.status_conflict": "تعارض القيود",
diff --git a/assets/locales/en-GB.json b/assets/locales/en-GB.json
index 8aea93a73e..85b9dd31be 100644
--- a/assets/locales/en-GB.json
+++ b/assets/locales/en-GB.json
@@ -236,6 +236,10 @@
"render.studio_area_help": "Up to four one-sided rectangles. Orthogonal half-edges U and V define size; U × V faces the lit side. Coordinates are world-space millimetres.",
"render.studio_center": "Centre X, Y, Z (mm)",
"render.studio_hdr_help": "Radiance .hdr, 2:1 panorama, up to 2048 × 1024. EXR is unavailable. The colour assumption applies only when primaries are unspecified.",
+ "sketch.hint.arc.center_point": "Arc: click centre and start, go round either way and click the end, or type a signed sweep",
+ "sketch.hint.circle.center": "Circle: click the centre, then a point on the circle",
+ "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to centre the second on the first",
+ "sketch.hint.rectangle.center": "Centre rectangle: click the centre, then a corner",
"sketch_text.align_center": "Centre",
"ui.3d_mouse_kind_cap": "Return to Centre",
"ui.3d_mouse_looks_like_cap": "The reading stays put while you hold it, the way a Return to Centre device does.",
diff --git a/assets/locales/en.json b/assets/locales/en.json
index 19309502c5..036a546e98 100644
--- a/assets/locales/en.json
+++ b/assets/locales/en.json
@@ -4174,6 +4174,32 @@
"sketch.dof_left": "{count} degrees of freedom left",
"sketch.dof_left_one": "{count} degree of freedom left",
"sketch.draw_curves": "Draw as {linetype}",
+ "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
+ "sketch.error.nothing_to_break": "nothing to break here",
+ "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
+ "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
+ "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
+ "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
+ "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
+ "sketch.hint.break": "Break: click a curve where it should split",
+ "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
+ "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
+ "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
+ "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
+ "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
+ "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
+ "sketch.hint.fallback": "Click in the sketch",
+ "sketch.hint.line": "Line: click points; right-click or Esc to finish",
+ "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
+ "sketch.hint.open_done": "Open done",
+ "sketch.hint.point3d": "3D Point: click where a 3D point goes",
+ "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
+ "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
+ "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
+ "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
+ "sketch.hint.slot": "Slot: click both ends, then the width",
+ "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
+ "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove",
"sketch.make_selection": "Convert the selection to {linetype}",
"sketch.open_ends": "Open {count}",
"sketch.status_conflict": "constraints conflict",
diff --git a/assets/locales/es.json b/assets/locales/es.json
index b3b9274ae7..f0b61ffec3 100644
--- a/assets/locales/es.json
+++ b/assets/locales/es.json
@@ -4168,6 +4168,32 @@
"sketch.dof_left": "Quedan {count} grados de libertad",
"sketch.dof_left_one": "Queda {count} grado de libertad",
"sketch.draw_curves": "Dibujar como {linetype}",
+ "sketch.error.closed_curve_two_crossings": "una curva cerrada necesita dos cruces para recortar",
+ "sketch.error.nothing_to_break": "no hay nada que romper ahí",
+ "sketch.error.offset_fillet_chamfer": "`{id}` es un desfase y sus esquinas siguen sus curvas de origen: redondea o corta las esquinas de origen antes de desfasar, o rompe antes la asociación de desfase",
+ "sketch.error.offset_trim": "`{id}` es un desfase y sus extremos siguen sus curvas de origen: edita las curvas de origen en su lugar, o rompe antes la asociación de desfase",
+ "sketch.hint.arc.center_point": "Arco: pulsa el centro y el inicio, rodea en cualquier sentido y pulsa el final, o escribe un barrido con signo",
+ "sketch.hint.arc.three_point": "Arco: pulsa el inicio, el fin y luego un punto del arco",
+ "sketch.hint.arc3d": "Arco 3D: pulsa el inicio, el fin y luego un punto del arco (los puntos pueden salir del plano del boceto)",
+ "sketch.hint.break": "Romper: pulsa una curva donde debe dividirse",
+ "sketch.hint.circle.center": "Círculo: pulsa el centro y luego un punto de la circunferencia",
+ "sketch.hint.constraint.generic": "Restricción: elige las entidades del boceto",
+ "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: elige una línea, dos puntos, o un punto y una línea; mantén Shift para elegir el punto medio de una línea",
+ "sketch.hint.constraint.midpoint": "Punto medio: elige un punto y una línea, o dos líneas para centrar la segunda en la primera",
+ "sketch.hint.dimension": "Cota: elige una o dos entidades y escribe el valor (o pulsa para colocarla primero); pulsa una cota para editarla; Intro aplica",
+ "sketch.hint.extend": "Extender: pulsa una curva cerca del final para extenderla (Shift: pulsa dos curvas para extender ambas hasta donde se encuentran)",
+ "sketch.hint.fallback": "Pulsa en el boceto",
+ "sketch.hint.line": "Línea: pulsa puntos; clic derecho o Esc para terminar",
+ "sketch.hint.line3d": "Línea 3D: pulsa puntos del mundo; clic derecho o Esc para terminar (los puntos pueden salir del plano del boceto)",
+ "sketch.hint.open_done": "Abierto",
+ "sketch.hint.point3d": "Punto 3D: pulsa dónde va un punto 3D",
+ "sketch.hint.rectangle.center": "Rectángulo centrado: pulsa el centro y luego una esquina",
+ "sketch.hint.rectangle.rounded": "Rectángulo redondeado: pulsa dos esquinas opuestas (Tab al cuadro de radio para escribir el radio de la esquina)",
+ "sketch.hint.rectangle.three_point": "Rectángulo de 3 puntos: pulsa dos puntos de un borde y luego el ancho",
+ "sketch.hint.rectangle.two_point": "Rectángulo: pulsa dos esquinas opuestas",
+ "sketch.hint.slot": "Ranura: pulsa ambos extremos y luego el ancho",
+ "sketch.hint.spline3d": "Spline 3D: pulsa puntos de ajuste en 3D; clic derecho o Esc para terminar",
+ "sketch.hint.trim": "Recortar: pulsa el trozo de curva que quieres quitar, o arrastra sobre los trozos que quieres quitar",
"sketch.make_selection": "Convertir la selección a {linetype}",
"sketch.open_ends": "Abiertos {count}",
"sketch.status_conflict": "restricciones en conflicto",
diff --git a/assets/locales/he.json b/assets/locales/he.json
index 88ce105493..2294f029e9 100644
--- a/assets/locales/he.json
+++ b/assets/locales/he.json
@@ -4174,6 +4174,32 @@
"sketch.dof_left": "נותרו {count} דרגות חופש",
"sketch.dof_left_one": "נותרה {count} דרגת חופש",
"sketch.draw_curves": "שרטוט כ־{linetype}",
+ "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
+ "sketch.error.nothing_to_break": "nothing to break here",
+ "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
+ "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
+ "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
+ "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
+ "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
+ "sketch.hint.break": "Break: click a curve where it should split",
+ "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
+ "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
+ "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
+ "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
+ "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
+ "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
+ "sketch.hint.fallback": "Click in the sketch",
+ "sketch.hint.line": "Line: click points; right-click or Esc to finish",
+ "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
+ "sketch.hint.open_done": "Open done",
+ "sketch.hint.point3d": "3D Point: click where a 3D point goes",
+ "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
+ "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
+ "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
+ "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
+ "sketch.hint.slot": "Slot: click both ends, then the width",
+ "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
+ "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove",
"sketch.make_selection": "המרת הבחירה ל־{linetype}",
"sketch.open_ends": "קצוות פתוחים: {count}",
"sketch.status_conflict": "אילוצים סותרים",
diff --git a/assets/locales/ja.json b/assets/locales/ja.json
index 5f566bff29..5e71a2ab6b 100644
--- a/assets/locales/ja.json
+++ b/assets/locales/ja.json
@@ -4174,6 +4174,32 @@
"sketch.dof_left": "残り自由度 {count}",
"sketch.dof_left_one": "残り自由度 {count}",
"sketch.draw_curves": "{linetype}として描く",
+ "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
+ "sketch.error.nothing_to_break": "nothing to break here",
+ "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
+ "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
+ "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
+ "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
+ "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
+ "sketch.hint.break": "Break: click a curve where it should split",
+ "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
+ "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
+ "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
+ "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
+ "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
+ "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
+ "sketch.hint.fallback": "Click in the sketch",
+ "sketch.hint.line": "Line: click points; right-click or Esc to finish",
+ "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
+ "sketch.hint.open_done": "Open done",
+ "sketch.hint.point3d": "3D Point: click where a 3D point goes",
+ "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
+ "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
+ "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
+ "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
+ "sketch.hint.slot": "Slot: click both ends, then the width",
+ "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
+ "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove",
"sketch.make_selection": "選択を{linetype}にする",
"sketch.open_ends": "開放 {count}",
"sketch.status_conflict": "拘束が競合しています",
diff --git a/assets/locales/pending/sketch-tool-hints.json b/assets/locales/pending/sketch-tool-hints.json
deleted file mode 100644
index acafb3d8a5..0000000000
--- a/assets/locales/pending/sketch-tool-hints.json
+++ /dev/null
@@ -1,204 +0,0 @@
-{
- "ar": {
- "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
- "sketch.error.nothing_to_break": "nothing to break here",
- "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
- "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
- "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
- "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
- "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
- "sketch.hint.break": "Break: click a curve where it should split",
- "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
- "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
- "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
- "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
- "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
- "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
- "sketch.hint.fallback": "Click in the sketch",
- "sketch.hint.line": "Line: click points; right-click or Esc to finish",
- "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
- "sketch.hint.open_done": "Open done",
- "sketch.hint.point3d": "3D Point: click where a 3D point goes",
- "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
- "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
- "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
- "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
- "sketch.hint.slot": "Slot: click both ends, then the width",
- "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
- "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove"
- },
- "en": {
- "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
- "sketch.error.nothing_to_break": "nothing to break here",
- "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
- "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
- "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
- "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
- "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
- "sketch.hint.break": "Break: click a curve where it should split",
- "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
- "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
- "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
- "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
- "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
- "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
- "sketch.hint.fallback": "Click in the sketch",
- "sketch.hint.line": "Line: click points; right-click or Esc to finish",
- "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
- "sketch.hint.open_done": "Open done",
- "sketch.hint.point3d": "3D Point: click where a 3D point goes",
- "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
- "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
- "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
- "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
- "sketch.hint.slot": "Slot: click both ends, then the width",
- "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
- "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove"
- },
- "es": {
- "sketch.error.closed_curve_two_crossings": "una curva cerrada necesita dos cruces para recortar",
- "sketch.error.nothing_to_break": "no hay nada que romper ahí",
- "sketch.error.offset_fillet_chamfer": "`{id}` es un desfase y sus esquinas siguen sus curvas de origen: redondea o corta las esquinas de origen antes de desfasar, o rompe antes la asociación de desfase",
- "sketch.error.offset_trim": "`{id}` es un desfase y sus extremos siguen sus curvas de origen: edita las curvas de origen en su lugar, o rompe antes la asociación de desfase",
- "sketch.hint.arc.center_point": "Arco: pulsa el centro y el inicio, rodea en cualquier sentido y pulsa el final, o escribe un barrido con signo",
- "sketch.hint.arc.three_point": "Arco: pulsa el inicio, el fin y luego un punto del arco",
- "sketch.hint.arc3d": "Arco 3D: pulsa el inicio, el fin y luego un punto del arco (los puntos pueden salir del plano del boceto)",
- "sketch.hint.break": "Romper: pulsa una curva donde debe dividirse",
- "sketch.hint.circle.center": "Círculo: pulsa el centro y luego un punto de la circunferencia",
- "sketch.hint.constraint.generic": "Restricción: elige las entidades del boceto",
- "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: elige una línea, dos puntos, o un punto y una línea; mantén Shift para elegir el punto medio de una línea",
- "sketch.hint.constraint.midpoint": "Punto medio: elige un punto y una línea, o dos líneas para centrar la segunda en la primera",
- "sketch.hint.dimension": "Cota: elige una o dos entidades y escribe el valor (o pulsa para colocarla primero); pulsa una cota para editarla; Intro aplica",
- "sketch.hint.extend": "Extender: pulsa una curva cerca del final para extenderla (Shift: pulsa dos curvas para extender ambas hasta donde se encuentran)",
- "sketch.hint.fallback": "Pulsa en el boceto",
- "sketch.hint.line": "Línea: pulsa puntos; clic derecho o Esc para terminar",
- "sketch.hint.line3d": "Línea 3D: pulsa puntos del mundo; clic derecho o Esc para terminar (los puntos pueden salir del plano del boceto)",
- "sketch.hint.open_done": "Abierto",
- "sketch.hint.point3d": "Punto 3D: pulsa dónde va un punto 3D",
- "sketch.hint.rectangle.center": "Rectángulo centrado: pulsa el centro y luego una esquina",
- "sketch.hint.rectangle.rounded": "Rectángulo redondeado: pulsa dos esquinas opuestas (Tab al cuadro de radio para escribir el radio de la esquina)",
- "sketch.hint.rectangle.three_point": "Rectángulo de 3 puntos: pulsa dos puntos de un borde y luego el ancho",
- "sketch.hint.rectangle.two_point": "Rectángulo: pulsa dos esquinas opuestas",
- "sketch.hint.slot": "Ranura: pulsa ambos extremos y luego el ancho",
- "sketch.hint.spline3d": "Spline 3D: pulsa puntos de ajuste en 3D; clic derecho o Esc para terminar",
- "sketch.hint.trim": "Recortar: pulsa el trozo de curva que quieres quitar, o arrastra sobre los trozos que quieres quitar"
- },
- "he": {
- "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
- "sketch.error.nothing_to_break": "nothing to break here",
- "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
- "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
- "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
- "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
- "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
- "sketch.hint.break": "Break: click a curve where it should split",
- "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
- "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
- "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
- "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
- "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
- "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
- "sketch.hint.fallback": "Click in the sketch",
- "sketch.hint.line": "Line: click points; right-click or Esc to finish",
- "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
- "sketch.hint.open_done": "Open done",
- "sketch.hint.point3d": "3D Point: click where a 3D point goes",
- "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
- "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
- "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
- "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
- "sketch.hint.slot": "Slot: click both ends, then the width",
- "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
- "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove"
- },
- "ja": {
- "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
- "sketch.error.nothing_to_break": "nothing to break here",
- "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
- "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
- "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
- "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
- "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
- "sketch.hint.break": "Break: click a curve where it should split",
- "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
- "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
- "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
- "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
- "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
- "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
- "sketch.hint.fallback": "Click in the sketch",
- "sketch.hint.line": "Line: click points; right-click or Esc to finish",
- "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
- "sketch.hint.open_done": "Open done",
- "sketch.hint.point3d": "3D Point: click where a 3D point goes",
- "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
- "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
- "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
- "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
- "sketch.hint.slot": "Slot: click both ends, then the width",
- "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
- "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove"
- },
- "vi": {
- "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
- "sketch.error.nothing_to_break": "nothing to break here",
- "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
- "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
- "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
- "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
- "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
- "sketch.hint.break": "Break: click a curve where it should split",
- "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
- "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
- "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
- "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
- "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
- "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
- "sketch.hint.fallback": "Click in the sketch",
- "sketch.hint.line": "Line: click points; right-click or Esc to finish",
- "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
- "sketch.hint.open_done": "Open done",
- "sketch.hint.point3d": "3D Point: click where a 3D point goes",
- "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
- "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
- "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
- "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
- "sketch.hint.slot": "Slot: click both ends, then the width",
- "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
- "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove"
- },
- "zh": {
- "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
- "sketch.error.nothing_to_break": "nothing to break here",
- "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
- "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
- "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
- "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
- "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
- "sketch.hint.break": "Break: click a curve where it should split",
- "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
- "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
- "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
- "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
- "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
- "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
- "sketch.hint.fallback": "Click in the sketch",
- "sketch.hint.line": "Line: click points; right-click or Esc to finish",
- "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
- "sketch.hint.open_done": "Open done",
- "sketch.hint.point3d": "3D Point: click where a 3D point goes",
- "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
- "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
- "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
- "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
- "sketch.hint.slot": "Slot: click both ends, then the width",
- "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
- "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove"
- },
- "en-GB": {
- "sketch.hint.arc.center_point": "Arc: click centre and start, go round either way and click the end, or type a signed sweep",
- "sketch.hint.circle.center": "Circle: click the centre, then a point on the circle",
- "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to centre the second on the first",
- "sketch.hint.rectangle.center": "Centre rectangle: click the centre, then a corner"
- }
-}
diff --git a/assets/locales/vi.json b/assets/locales/vi.json
index cc245ac8cd..f6b1a20e5a 100644
--- a/assets/locales/vi.json
+++ b/assets/locales/vi.json
@@ -4174,6 +4174,32 @@
"sketch.dof_left": "Còn {count} bậc tự do",
"sketch.dof_left_one": "Còn {count} bậc tự do",
"sketch.draw_curves": "Vẽ dưới dạng {linetype}",
+ "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
+ "sketch.error.nothing_to_break": "nothing to break here",
+ "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
+ "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
+ "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
+ "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
+ "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
+ "sketch.hint.break": "Break: click a curve where it should split",
+ "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
+ "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
+ "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
+ "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
+ "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
+ "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
+ "sketch.hint.fallback": "Click in the sketch",
+ "sketch.hint.line": "Line: click points; right-click or Esc to finish",
+ "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
+ "sketch.hint.open_done": "Open done",
+ "sketch.hint.point3d": "3D Point: click where a 3D point goes",
+ "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
+ "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
+ "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
+ "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
+ "sketch.hint.slot": "Slot: click both ends, then the width",
+ "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
+ "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove",
"sketch.make_selection": "Chuyển đổi vùng chọn sang {linetype}",
"sketch.open_ends": "Đầu hở: {count}",
"sketch.status_conflict": "ràng buộc xung đột",
diff --git a/assets/locales/zh.json b/assets/locales/zh.json
index b6758bbaa5..ef33f65ac2 100644
--- a/assets/locales/zh.json
+++ b/assets/locales/zh.json
@@ -4174,6 +4174,32 @@
"sketch.dof_left": "剩余 {count} 个自由度",
"sketch.dof_left_one": "剩余 {count} 个自由度",
"sketch.draw_curves": "绘制为 {linetype}",
+ "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
+ "sketch.error.nothing_to_break": "nothing to break here",
+ "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
+ "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
+ "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
+ "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
+ "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
+ "sketch.hint.break": "Break: click a curve where it should split",
+ "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
+ "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
+ "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
+ "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
+ "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
+ "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
+ "sketch.hint.fallback": "Click in the sketch",
+ "sketch.hint.line": "Line: click points; right-click or Esc to finish",
+ "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
+ "sketch.hint.open_done": "Open done",
+ "sketch.hint.point3d": "3D Point: click where a 3D point goes",
+ "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
+ "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
+ "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
+ "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
+ "sketch.hint.slot": "Slot: click both ends, then the width",
+ "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
+ "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove",
"sketch.make_selection": "将选择转换为 {linetype}",
"sketch.open_ends": "开放 {count}",
"sketch.status_conflict": "约束冲突",
diff --git a/attribution/pending/sketch-tool-hints.md b/attribution/pending/sketch-tool-hints.md
deleted file mode 100644
index 6d7bb90abb..0000000000
--- a/attribution/pending/sketch-tool-hints.md
+++ /dev/null
@@ -1 +0,0 @@
-| assets/locales/pending/sketch-tool-hints.json | carlymx | Original sketch tool hints and engine error translations | MIT OR Apache-2.0 |